Bacterial detection based on Förster resonance energy transfer

The huge economic loss and threat to human health caused by bacterial infection have attracted the public's concern, and there is an urgent need to relieve and improve the tough problem. Therefore, it is significant to establish a facile, rapid, and sensitive method for bacterial detection considering the shortcomings of existing methods. Förster resonance energy transfer (FRET)-based sensors have exhibited immense potential and applicability for bacterial detection given their high signal-to-noise ratio and high sensitivity. This review focuses on the development of FRET-based fluorescence assays for bacterial detection. We summarize the principle of FRET-based assays, discuss the commonly used recognition molecules and further introduce three frequent construction strategies. Based on the strategies and materials, relevant applications are presented. Moreover, some restrictions of FRET fluorescence sensors and development prospects are discussed. Suitable donor-acceptor pairs and stable recognition molecules are the essential conditions for sensors to play their roles, and there is still some room for development. Besides, applying FRET fluorescence sensors to point-of-care detection is still difficult. Future developments could focus on near-infrared fluorescent dyes and simultaneous detection of multiple analytes.

Photophysics of fluorescent nanoparticles based on organic dyes - challenges and design principles

Fluorescent nanoparticles have become attractive for bioanalysis and imaging, due to their high brightness and photostability. Many different optical materials have been applied in fluorescent nanoparticles with a broad range of properties and characteristics. One appealing approach is the incorporation of molecular organic fluorophores in nanoparticles with the intention of transferring their known attractive solution-state properties directly to the nanoparticles. However, as molecular dyes are packed closely together in the nanoparticles their interactions most often result in fluorescence quenching and change in spectral properties making this approach challenging. In this perspective we will first discuss the origins of quenching and spectral shifts observed in dye based nanoparticles. On this background, we will then describe various designs of dye based NPs and how they address the challenges of dye-dye interactions and quenching. Our aim is to provide a general framework for understanding the supramolecular mechanisms that determine the photophysics of dye based nanoparticles. This framework of molecular photophysics and its relation to the internal structure of dye based nanoparticles can hopefully serve to assist rational design and optimization of new and improved dye based nanoparticles.

Multi-color polymer carbon dots synthesized from waste polyolefins through phenylenediamine-assisted hydrothermal processing

The large accumulation and low recycling rates of polyolefin waste have posed a threat to the environment and human health. The shortage of chemical recycling methods for polyolefins strongly demands the development of new and sustainable treatment technologies for hydrocarbon plastics to improve their waste management. In this study, polyethylene (PE) and polypropylene (PP) were utilized for the preparation of multi-color polymer carbon dots (PCDs) via a two-step hydrothermal (HT) synthesis involving (i) thermo-oxidative degradation of polyolefins to precursors containing plentiful oxygen-based functional groups, and (ii) modification with phenylenediamine (PDA). The fluorescence of PCDs depends on the structure of isomeric PDA and PCDs modified by ortho-, meta-, and para-PDA emit blue, green, and yellow color fluorescence, respectively. The formation mechanism of PCDs, involving dehydrative condensation and amination of PE or PP-derived precursors by PDA, was proposed. The obtained PCDs were utilized for the detection and quantification of Fe3+ ions at ppm concentrations. The proposed strategy here aims to broaden the scope of the chemical recycling methods for polyolefin plastic waste as well as to develop a conversion route of polyolefin to value-added materials.

Tumor diagnosis using carbon-based quantum dots: Detection based on the hallmarks of cancer

Carbon-based quantum dots (CQDs) have been shown to have promising application value in tumor diagnosis. Their use, however, is severely hindered by the complicated nature of the nanostructures in the CQDs. Furthermore, it seems impossible to formulate the mechanisms involved using the inadequate theoretical frameworks that are currently available for CQDs. In this review, we re-consider the structure-property relationships of CQDs and summarize the current state of development of CQDs-based tumor diagnosis based on biological theories that are fully developed. The advantages and deficiencies of recent research on CQDs-based tumor diagnosis are thus explained in terms of the manifestation of nine essential changes in cell physiology. This review makes significant progress in addressing related problems encountered with other nanomaterials.

A review on the chemical and biological sensing applications of silver/carbon dots nanocomposites with their interaction mechanisms

The development of new nanocomposites has a significant impact on modern instrumentation and analytical methods for chemical analysis. Due to their unique properties, carbon dots (CDs) and silver nanoparticles (AgNPs), distinguished by their unique physical, electrochemical, and optical properties, have captivated significant attention. Thus, combining AgNPs and CDs may produce Ag/CDs nanocomposites with improved performances than the individual material. This comprehensive review offers an in-depth exploration of the synthesis, formation mechanism, properties, and the recent surge in chemical and biological sensing applications of Ag/CDs with their sensing mechanisms. Detailed insights into synthesis methods to produce Ag/CDs are unveiled, followed by information on their physicochemical and optical properties. The crux of this review lies in its spotlight on the diverse landscape of chemical and biological sensing applications of Ag/CDs, with a particular focus on fluorescence, electrochemical, colorimetric, surface-enhanced Raman spectroscopy, and surface plasmon resonance sensing techniques. The elucidation of sensing mechanisms of the nanocomposites with various target analytes adds depth to the discussion. Finally, this review culminates with a concise summary and a glimpse into future perspectives of Ag/CDs aiming to achieve highly efficient and enduring Ag/CDs for various applications.

Carbon quantum dots in bioimaging and biomedicines

Carbon quantum dots (CQDs) are gaining a lot more attention than traditional semiconductor quantum dots owing to their intrinsic fluorescence property, chemical inertness, biocompatibility, non-toxicity, and simple and inexpensive synthetic route of preparation. These properties allow CQDs to be utilized for a broad range of applications in various fields of scientific research including biomedical sciences, particularly in bioimaging and biomedicines. CQDs are a promising choice for advanced nanomaterials research for bioimaging and biomedicines owing to their unique chemical, physical, and optical properties. CQDs doped with hetero atom, or polymer composite materials are extremely advantageous for biochemical, biological, and biomedical applications since they are easy to prepare, biocompatible, and have beneficial properties. This type of CQD is highly useful in phototherapy, gene therapy, medication delivery, and bioimaging. This review explores the applications of CQDs in bioimaging and biomedicine, highlighting recent advancements and future possibilities to increase interest in their numerous advantages for therapeutic applications.

Fluorescent carbon dots synthesized by waste wind turbine blade for photocatalytic degradation

Developing novel waste recycling strategies has become a feasible solution to overcome environmental pollution. In this work, a method of using waste wind turbine blade (WTB) as a carbon source to synthesize blue fluorescent carbon dots (B-CDs) by hydrothermal treatment is proposed. B-CDs are spherical and have an average particle size of 5.2 nm. The surface is rich in C-O, C=O, -CH3 , and N-H bond functional groups, containing five elements: C, O, N, Si, and Ca. The optimal emission wavelength of B-CDs is 463 nm, corresponding to an excitation wavelength of 380 nm. Notably, a relatively high quantum yield of 29.9% and a utilization rate of 40% were obtained. In addition, B-CDs can serve as a photocatalyst to degrade methylene blue dye, with a degradation efficiency of 64% under 40-min irradiation conditions. The presence of holes has a significant influence on the degradation process.

Carbon dots as potential candidate for photocatalytic treatment of dye wastewater

Water is the utmost important element for the existence of life. In recent decades, water resources have become highly contaminated by a variety of pollutants, especially toxic dyes that are harmful to both living beings and environment. Hence, there is an urgent need to develop more effective methods than traditional wastewater treatment approaches for treatment of hazardous dyes. Herein, we have addressed the various aspects related to the effective and economically feasible method for photocatalytic degradation of these dyes employing carbon dots. The photocatalysts based on carbon dots including those mediated from biomass have many superiorities over conventional methods such as utilization of economically affordable, non-toxic, rapid reactions, and simple post-processing steps. The current study will also facilitate better insight into the understanding of photocatalytic treatment of dye-polluted wastewater for future wastewater treatment studies. Additionally, the possible mechanistic pathways of photocatalytic dye decontamination, several challenges, and future perspectives have also been summarized.

Progress on the luminescence mechanism and application of carbon quantum dots based on biomass synthesis

With the continuous development of carbon-based materials, a variety of new materials have emerged one after another. Carbon Quantum Dots (CQDs) have succeeded in standing out from the crowd of new materials due to their better optical properties in biomedicine, ion detection, anti-counterfeiting materials and photocatalysis. In recent years, through the continuous exploration of CQDs, research scholars have found that the organic substances or heavy metals contained in traditional ones can cause irreversible harm to people and the environment. Therefore, the application of traditional CQDs in future studies will be gradually limited. Among various new materials, biomass raw materials have the merits of good biocompatibility, lower toxicity and green and environmental protection, which largely overcome the defects of traditional materials and have attracted many scholars to focus on the research and development of various biomass CQDs. This paper summarises the optical properties, fluorescence mechanisms, synthetic methods, functionalisation modulation of biomass CQDs and their relevant research progress in the fields of ion detection, bioimaging, biomedicine, biosensing, solar cells, anti-counterfeit materials, photocatalysis and capacitors. Finally, the paper concludes with some discussion of the challenges and prospects of this exciting and promising field of application.

Tuning the Luminescence of Microwave-Assisted N-Doped Fluorescent Carbon Dots: Bioimaging Applications and Label-Free Anti-Cancer Drug Delivery

Nanosized fluorescent carbon dots (Cdots) have gained a lot of attention in the recent years because of their superior properties, such as good biocompatibility, low toxicity, excellent chemical stability, resistance to photobleaching, and ease of chemical modification. Cdots are promising candidates for considerable applications in various fields: sensors, bioimaging, and drug delivery. Specifically, nitrogen-doped Cdots have attracted a huge interest because of their applicability in bioimaging and drug delivery. Conventional methods for the synthesis of Cdots have drawbacks, such as the use of organic solvents, the presence of side products, and the time required for synthesis. Keeping all these points in mind, herein, we report green methodology for the synthesis of water-soluble, blue-emitting, nitrogen-doped multifunctional Cdots under microwave irradiation within 3 min. The Cdots were prepared using citric acid and arginine as source materials and were characterized using various physicochemical techniques. A pH-responsive drug delivery system was then designed using anticancer drug doxorubicin and the synthesized Cdots. The biocompatibility of synthesized Cdots was analyzed against L929 normal cell line. The Cdots-DOX conjugates exhibited efficient anticancer activity against HeLa cells and also acted as excellent bioimaging agents.

Intense Blue Photo Emissive Carbon Dots Prepared through Pyrolytic Processing of Ligno-Cellulosic Wastes

In this work, Carbon Dots with intense blue photo-luminescent emission were prepared through a pyrolytic processing of forestry ligno-cellulosic waste. The preparation path is simple and straightforward, mainly consisting of drying and fine grinding of the ligno-cellulosic waste followed by thermal exposure and dispersion in water. The prepared Carbon Dots presented characteristic excitation wavelength dependent emission peaks ranging within 438-473 nm and a remarkable 28% quantum yield achieved at 350 nm excitation wavelength. Morpho-structural investigations of the prepared Carbon Dots were performed through EDX, FT-IR, Raman, DLS, XRD, and HR-SEM while absolute PLQY, steady state, and lifetime fluorescence were used to highlight their luminescence properties. Due to the wide availability of this type of ligno-cellulosic waste, an easy processing procedure achieved photo-luminescent properties, and the prepared Carbon Dots could be an interesting approach for various applications ranging from sensors, contrast agents for biology investigations, to photonic conversion mediums in various optoelectronic devices. Additionally, their biocompatibility and waste valorization in new materials might be equally good arguments in their favor, bringing a truly "green" approach.

Preparation of Fluorescent Carbon Dots Composites and Their Potential Applications in Biomedicine and Drug Delivery-A Review

Carbon dots (CDs), a new member of carbon nanostructures, rely on surface modification and functionalization for their good fluorescence phosphorescence and excellent physical and chemical properties, including small size (<10 nm), high chemical stability, biocompatibility, non-toxicity, low cost, and easy synthesis. In the field of medical research on cancer (IARC), CDs, a new material with unique optical properties as a photosensitizer, are being applied to heating local apoptosis induction of cancer cells. In addition, imaging tools can also be combined with a drug to form the nanometer complex compound, the imaging guidance for multi-function dosage, so as to improve the efficiency of drug delivery, which also plays a big role in genetic diagnosis. This paper mainly includes three parts: The first part briefly introduces the synthesis and preparation of carbon dots, and summarizes the advantages and disadvantages of different preparation methods; The second part introduces the preparation methods of carbon dot composites. Finally, the application status of carbon dot composites in biomedicine, cancer theranostics, drug delivery, electrochemistry, and photocatalysis is summarized.

Review on Fluorescent Carbon/Graphene Quantum Dots: Promising Material for Energy Storage and Next-Generation Light-Emitting Diodes

Carbon/graphene quantum dots are 0D fluorescent carbon materials with sizes ranging from 2 nm to around 50 nm, with some attractive properties and diverse applications. Different synthesis routes, bandgap variation, higher stability, low toxicity with tunable emission, and the variation of physical and chemical properties with change in size have drawn immense attention to its potential application in different optoelectronics-based materials, especially advanced light-emitting diodes and energy storage devices. WLEDs are a strong candidate for the future of solid-state lighting due to their higher luminance and luminous efficiency. High-performance batteries play an important part in terms of energy saving and storage. In this review article, the authors provide a comparative analysis of recent and ongoing advances in synthesis (top-down and bottom-up), properties, and wide applications in different kinds of next-generation light-emitting diodes such as WLEDs, and energy storage devices such as batteries (Li-B, Na-B) and supercapacitors. Furthermore, they discuss the potential applications and progress of carbon dots in battery applications such as electrode materials. The authors also summarise the developmental stages and challenges in the existing field, the state-of-the-art of carbon/graphene quantum dots, and the potential and possible solutions for the same.

Green Synthesis of Carbon Dots and Their Integration into Nylon-11 Nanofibers for Enhanced Mechanical Strength and Biocompatibility

Carbon dots (CDs) have been extensively explored to show good optical features, low toxicity, and good biocompatibility. Herein, we report the new synthesis of forsythia-derived CDs (F-CDs) and their incorporation into Nylon-11 nanofibers for improved mechanical properties and biocompatibility. F-CDs are prepared from a Chinese herb forsythia via a magnetic hyperthermia method in 90 s without the use of any organic solvents. The as-prepared F-CDs with rich surface functional groups can be well embedded into Nylon-11 nanofibers via electrospinning, providing Nylon-11/F-CD nanofiber mats with remarkably enhanced mechanical properties. With the incorporation of F-CDs at 10 wt% into the Nylon-11 nanofiber mats, the tensile strength increases from 7.5 to 16.6 MPa, and the elongation ratio at break increases from 39% to 125%. Moreover, the Nylon-11/F-CD nanofiber mats exhibit excellent cytocompatibility towards L929 fibroblast cells with cell viability of 96%. These findings may guide the development of various CD-embedded nanofiber mats with good mechanical properties and biocompatibility potentially useful for biomedical applications, such as tissue engineering scaffolds or wound dressing.

The Transformation of 0-D Carbon Dots into 1-, 2- and 3-D Carbon Allotropes: A Minireview

Carbon dots (CDs) represent a relatively new type of carbon allotrope with a 0-D structure and with nanoparticle sizes < 10 nm. A large number of research articles have been published on the synthesis, characteristics, mechanisms and applications of this carbon allotrope. Many of these articles have also shown that CDs can be synthesized from “bottom-up” and “top-down” methods. The “top-down” methods are dominated by the breaking down of large carbon structures such as fullerene, graphene, carbon black and carbon nanotubes into the CDs. What is less known is that CDs also have the potential to be used as carbon substrates for the synthesis of larger carbon structures such as 1-D carbon nanotubes, 2-D or 3-D graphene-based nanosheets and 3-D porous carbon frameworks. Herein, we present a review of the synthesis strategies used to convert the 0-D carbons into these higher-dimensional carbons. The methods involve the use of catalysts or thermal procedures to generate the larger structures. The surface functional groups on the CDs, typically containing nitrogen and oxygen, appear to be important in the process of creating the larger carbon structures that typically are formed via the generation of covalent bonds. The CD building blocks can also ‘aggregate’ to form so called supra-CDs. The mechanism for the formation of the structures made from CDs, the physical properties of the CDs and their applications (for example in energy devices and as reagents for use in medicinal fields) will also be discussed. We hope that this review will serve to provide valuable insights into this area of CD research and a novel viewpoint on the exploration of CDs.

Covalent and Noncovalent Loading of Doxorubicin by Folic Acid-Carbon Dot Nanoparticles for Cancer Theranostics

With special properties such as excellent fluoresce features, low toxicity, good biocompatibility, permeability, and easy clearance from the body, carbon dot (CD)-based nanoparticles (NPs) have the potential to deliver drugs and use in vivo diagnostics through molecular imaging. In this work, folic acid-CD (FA-CD) NPs were prepared to deliver doxorubicin (Dox) covalently and noncovalently as cancer theranostics. FA was conjugated to the surface of CDs for targeting cancer cells with overexpressing folate receptors. CDs prepared with various amounts of precursors lead to their associated NPs with different photoluminescence properties and drug release profiles. The loading of Dox and its releasing data depends on the linkage of drug Dox to FA-CD and CD composition. All NPs were characterized by UV-vis, Fourier transform infrared spectroscopy, and dynamic light scattering. The noncovalent FA-CD-Dox NPs were preferred with a simple preparation process, excellent photoluminescence, and in vitro drug release properties. The noncovalent FA-CD-Dox showed the best efficacy against MDA-MB-231 compared to the CD-Dox and covalent FA-CD-Dox.

Luminescent Composite Carbon/SiO2 Structures: Synthesis and Applications

Luminescent carbon nanostructures (CNSs) have attracted great interest from the scientific community due to their photoluminescent properties, structural features, low toxicity, and a great variety of possible applications. Unfortunately, a few problems hinder their further development. These include the difficulties of separating a mixture of nanostructures after synthesis and the dependence of their properties on the environment and the aggregate state. The application of a silica matrix to obtain luminescent composite particles minimizes these problems and improves optical properties, reduces photoluminescence quenching, and leads to wider applications. We describe two methods for the formation of silica composites containing CNSs: inclusion of CNSs into silica particles and their grafting onto the silica surface. Moreover, we present approaches to the synthesis of multifunctional particles. They combine the unique properties of silica and fluorescent CNSs, as well as magnetic, photosensitizing, and luminescent properties via the combination of functional nanoparticles such as iron oxide nanoparticles, titanium dioxide nanoparticles, quantum dots (QDs), and gold nanoclusters (AuNCs). Lastly, we discuss the advantages and challenges of these structures and their applications. The novelty of this review involves the detailed description of the approaches for the silica application as a matrix for the CNSs. This will support researchers in solving fundamental and applied problems of this type of carbon-based nanoobjects.

Regenerated Silk Nanofibers for Robust and Cyclic Adsorption-Desorption on Anionic Dyes

In recent years, adsorption-based membranes have been widely investigated to remove and separate textile pollutants. However, cyclic adsorption-desorption to reuse a single adsorbent and clear scientific evidence for the adsorption-desorption mechanism remains challenging. Herein, silk nanofibers were used to assess the adsorption potential for the typical anionic dyes from an aqueous medium, and they show great potential toward the removal of acid dyes from the aqueous solution with an adsorption rate of ∼98% in a 1 min interaction. Further, we measured the filtration proficiency of a silk nanofiber membrane in order to propose a continuous mechanism for the removal of acid blue dye, and a complete rejection was observed with a maximum permeability rate of ∼360 ± 5 L·m^-2·h^-1. The Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy studies demonstrate that this fast adsorption occurs due to multiple interactions between the dye molecule and the adsorbent substrate. The as-prepared material also shows remarkable results in desorption. A 50-time cycle exhibits complete adsorption and desorption ability, which not only facilitates high removal aptitude but also produces less solid waste than other conventional adsorbents. Additionally, fluorescent 2-bromo-2-methyl-propionic acid (abbreviated as EtOxPY)-silk nanofibers can facilitate to illustrate a clear adsorption and desorption mechanism. Therefore, the above-prescribed results make electrospun silk nanofibers a suitable choice for removing anionic dyes in real-time applications.

Spontaneously sp2-Carbonized Fluorescent Polyamides as a Probe Material for Bioimaging

Spontaneously sp²-carbonized polyamides (PA1, PA2) were prepared via Knoevenagel-type side reactions of malonyl moieties under mild conditions in the polycondensation of dicarbonyl chloride and diamine. Both polymers were soluble in water and emissive in the visible region, and the fluorescence (FL) intensity and the maximum wavelength were highly dependent on the excitation wavelength and the pH. Their chemical structures and FL origin were clarified by performing various spectroscopic analyses. π*-π transition was assumed to be allowed in an enol form based on the conjugated structure formed by the side reaction; this was responsible for its pH dependency and high FL quantum efficiency. In particular, PA2, which comprises the tertiary amide linkage, showed quick endocytosis, low cytotoxicity, excellent biocompatibility, and exclusively stained lysosomes with the lowest intracellular pH. These results will help in understanding the origin of the FL emission of carbonized nanomaterials and exploring more advanced functions in the field of bioimaging.

Transcriptomics Integrated with Metabolomics Reveals 2-Methoxy-1, 4-Naphthoquinone-Based Carbon Dots Induced Molecular Shifts in Penicillium italicum

Penicillium italicum (P. italicum), a citrus blue mold, is a pathogenic fungus that greatly affects the postharvest quality of citrus fruits with significant economic loss. Our previous research showed that 2-methoxy-1, 4-naphthoquinone (MNQ) inhibited the growth of Penicillium italicum. However, the water dispersibility of MNQ will limit its further application. Herein, we synthesized MNQ-based carbon dots (2−CDs) with better water dispersibility, which showed a potential inhibitory effect on P. italicum (MIC = 2.8 μg/mL) better than that of MNQ (MIC = 5.0 μg/mL). Transcriptomics integrated with metabolomics reveals a total of 601 differentially enriched genes and 270 differentially accumulated metabolites that are co-mapped as disruptive activity on the cell cytoskeleton, glycolysis, and histone methylation. Furthermore, transmission electron microscopy analysis showed normal appearances and intracellular septum of P. italicum after treatment. These findings contribute tofurther understanding of the possible molecular action of 2−CDs.

Incorporation of green emission polymer dots into pyropheophorbide-α enhance the PDT effect and biocompatibility

BACKGROUND

A green emission up-conversion carbon-based polymer dots (CPDs) owned excellent photophysical properties and good solubility. Most photosensitizers (PS) are hydrophobic which limits their application in biomedicine. Herein we synthesized and integrated green emitting CPDs into pyropheophorbide-α (PPa) to improve the overall properties of the PS.

MATERIAL AND METHODS

The nano-agent was incorporated through amide condensation and electrostatic interaction. The structure, size and morphology of the prepared conjugates were determined by FTIR, TEM, DLS, TGA, ¹HNMR, Uv-vis, and fluorescence spectrophotometry. The dark and light toxicity, as well as cellular uptake, was also monitored on the human esophageal cancer cell line (Eca-109).

RESULTS

Our results illustrate that the conjugation improved the PDT efficacy by increasing the ROS generation. The nano-hybrids showed pH sensitivity as well as good hemocompatibility as the hemolysis ratio was decreased when treated with nano-conjugates. PPa-CPD1 and PPa-CPD2 had the pH response and stronger ability to absorb light and produce fluorescence in an acidic environment (pH 4.0 and pH 5.0) The synthesized nano-hybrids doesnot affect the clotting time. An increase in the absorbance wavelengths was observed. The results of MTT assay showed that dark toxicity was reduced after conjugation.

CONCLUSION

This CPDs-based drug enhanced tumor-inhibition efficiency as well as low dark toxicity in vitro, showing significant application potential for PDT-based treatment.

Natural Occurrence of Carbon Dots during In Vitro Nonenzymatic Glycosylation of Hemoglobin A0

Carbon dots, the nanostructures of carbon, have excellent optical and chemical properties and find a range of applications in various fields of biology and medicine. In the current study, carbon dots are synthesized using in vitro nonenzymatic glycosylation at 37 °C, which is the conventional method for the synthesis of Advanced Glycosylation End products. While comparing the physicochemical properties using a series of physical and chemical analyses including light absorption, fluorescence, photoluminescence, chemical composition, functional group analysis, and in vitro imaging, striking similarities are found among Carbon dots and Advanced Glycosylation End products. Based on the evident resemblance between the two, we propose either the presence of a common structural backbone or the coexistence of the two individual chemical entities. Thus, the formation of carbon dots at physiological temperatures raises health concerns as nonenzymatic glycosylation is a physiological process in humans and the rate of which is elevated during diabetes. The Advanced Glycosylation End products are known to have a detrimental effect in diabetic patients, and the chemical similarity between the two questions the widely studied biocompatibility of carbon dots.

Carbon dots with polarity-tunable characteristics for the selective detection of sodium copper chlorophyllin and copper ions

Compared to water-soluble carbon dots (CDs) the properties and applications of hydrophobic CDs are rarely addressed. In this study, a one-pot, simple chemical oxidation approach has been applied to synthesize hydrophobic carbon dots (TO-CDs) at room temperature from triolein (TO) in concentrated sulfuric acid solution. Sodium copper chlorophyllin (SCC) quenches the fluorescence of TO-CDs by a photoinduced electron transfer process. Upon excitation at 400 nm, the fluorescence intensity of TO-CDs probe at 500 nm shows a linear response against the SCC concentration ranging from 1.0 to 10 μM, with a limit of detection (LOD) of 0.61 μM. Quantitation of SCC in flavored drinks shows percentage recovery (%R) vaues of 98-103% and relative standard deviation (RSD) values less than 6.5%. The hydrophobic TO-CDs can be converted into hydrophilic TO-CDs through hydrolysis in NaOH solution. The presence of sulfonyl groups on the hydrophilic TO-CDs enhances the coordination ability of the CDs toward Cu²⁺ ions, leading to fluorescence quenching which allows for the detection of Cu²⁺ ions with LOD of 0.21 μM and a linear range of 0.5-10 μM. The hydrophilic TO-CD probe possesses high selectivity toward Cu²⁺ ions (tolerance at least ten-fold comparative to other metal ions). The assay has been validated with the analysis of spiked soil samples, with %R values of Cu concentration of 97.8-99.0% and RSDs below 2.0%. The surface tunable CD probes demonstrate their potential for the rapid screening of Cu²⁺ ions in environmental samples and SCC in foods.

Ultrasensitive Detection of Fe3+ Ions Using Functionalized Graphene Quantum Dots Fabricated by a One-Step Pulsed Laser Ablation Process

With respect to the detection of Fe3+ ions, graphene quantum dots (GQDs) have limitations for commercialization owing to their high limit of detection (LOD). Here, we report a one-step pulsed laser ablation (PLA) process to fabricate amino-functionalized GQDs (FGQDs) for the efficient detection of Fe3+ using polypyrrole (PPy) both as a precursor (amine N) and as a surfactant and also using graphite as a carbon precursor. Using this method, the amine N groups were easily incorporated into the carbon network of the GQDs. Additionally, compared to pristine GQDs, FGQDs showed smaller particle sizes and narrower size distributions owing to the surface passivation effects of the PPy surfactant. Due to the synergistic effect of surface passivation and incorporation of amine N groups, FGQDs exhibited a sensitive response to Fe3+ ions in the concentration range of 500 nM to 50 μM, which is lower than the quality standards for Fe3+ ions (∼5.36 μM) as suggested by the World Health Organization (WHO). Furthermore, the processing time for synthesizing FGQDs by the PLA process was less than 30 min, thus allowing successful practical applications of GQDs in the sensing field.

Carbon dots: a novel platform for biomedical applications

Carbon dots (CDs) are a recently synthesised class of carbon-based nanostructures known as zero-dimensional (0D) nanomaterials, which have drawn a great deal of attention owing to their distinctive features, which encompass optical properties (e.g., photoluminescence), ease of passivation, low cost, simple synthetic route, accessibility of precursors and other properties. These newly synthesised nano-sized materials can replace traditional semiconductor quantum dots, which exhibit significant toxicity drawbacks and higher cost. It is demonstrated that their involvement in diverse areas of chemical and bio-sensing, bio-imaging, drug delivery, photocatalysis, electrocatalysis and light-emitting devices consider them as flawless and potential candidates for biomedical application. In this review, we provide a classification of CDs within their extended families, an overview of the different methods of CDs preparation, especially from natural sources, i.e., environmentally friendly and their unique photoluminescence properties, thoroughly describing the peculiar aspects of their applications in the biomedical field, where we think they will thrive as the next generation of quantum emitters. We believe that this review covers a niche that was not reviewed by other similar publications.

Facile Fabrication of Highly Fluorescent N-Doped Carbon Quantum Dots Using an Ultrasonic-Assisted Hydrothermal Method: Optical Properties and Cell Imaging

Fluorescent N-doped carbon nanodots (CNDs) are a type of environmentally friendly nanomaterial that is promising for application in cell imaging and optoelectronics. In this paper, a natural amino acid (l-glutamic acid) was used as a precursor, and two different morphological and structured N-doped carbon quantum dots (CQDs) were synthesized via a one-step ultrasonic-assisted hydrothermal method at 230 and 250 °C. Various microscopy and spectroscopy techniques were employed to characterize the morphology, structure, optical properties, and stability of the CQDs. The results showed that N-CQDs-1 are new CNDs composed of amorphous carbon with a large amount of pyroglutamic acid, and N-CQDs-2 are composed of pure amorphous carbon. The CQDs exhibit excellent optical properties, such as 40.5% quantum yield, strong photobleaching resistance, and superior photostability. Combining the fluorescence lifetimes and radiative and non-radiative decay constants, the photoluminescence mechanism of the CQDs was qualitatively explained. The two CQDs were used for BV2 cell imaging and showed good results, implying the ultrasonic-assisted hydrothermal approach as a facile method to obtain structure- and morphology-controllable N-doped CQDs with prospect for application in cell imaging.

Carbon quantum dots as a sensitive fluorescent probe for quantitation of pregabalin; application to real samples and content uniformity test

A novel optical nano-sensor for the detection of pregabalin (PG) in its pharmaceutical (Lyrica®) capsules and biological samples was reported. For the fabrication of highly fluorescent carbon quantum dots (CQDts), a simple green hydrothermal approach was described, and ascorbic acid (AA) was used as a carbon source. The obtained CQDts were confirmed by spectroscopic characterization such as transmission electron microscopy (TEM) and Fourier-transform infrared (FTIR) spectra. The synthesized CQDts were capped by alcohol to form yellow emitters, showing strong fluorescent emission at 524 nm, and excitation at 356 nm. The method is based on fluorescence quenching of CQDts in the presence of PG. The proposed analytical method was validated according to ICH guidelines. PG was successively assayed in the concentration range of 4.0 to 100 μg/ml). The detection and quantitation limits were 1.12 and 3.39 μg/ml, respectively. The proposed method could be used in both quality control and pharmacokinetic research for the studied drug.

Sulfhydryl functionalized carbon quantum dots as a turn-off fluorescent probe for sensitive detection of Hg2

Mercury ion (Hg2+) is one of the most toxic heavy metal ions and lowering the detection limit of Hg2+ is always a challenge in analytical chemistry and environmental analysis. In this work, sulfhydryl functionalized carbon quantum dots (HS-CQDs) were synthesized through a one-pot hydrothermal method. The obtained HS-CQDs were able to detect mercury ions Hg2+ rapidly and sensitively through fluorescence quenching, which may be ascribed to the formation of nonfluorescent ground-state complexes and electron transfer reaction between HS-CQDs and Hg2+. A modification of the HS-CQD surface by -SH was confirmed using Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The HS-CQDs sensing system obtained a good linear relationship over a Hg2+ concentration ranging from 0.45 μM to 2.1 μM with a detection limit of 12 nM. Delightfully, the sensor has been successfully used to detect Hg2+ in real samples with satisfactory results. This means that the sensor has the potential to be used for testing actual samples.

Review: Nanomaterials for Reactive Oxygen Species Detection and Monitoring in Biological Environments

Reactive oxygen species (ROS) and dissolved oxygen play key roles across many biological processes, and fluorescent stains and dyes are the primary tools used to quantify these species in vitro. However, spatio-temporal monitoring of ROS and dissolved oxygen in biological systems are challenging due to issues including poor photostability, lack of reversibility, and rapid off-site diffusion. In particular, ROS monitoring is hindered by the short lifetime of ROS molecules and their low abundance. The combination of nanomaterials and fluorescent detection has led to new opportunities for development of imaging probes, sensors, and theranostic products, because the scaffolds lead to improved optical properties, tuneable interactions with cells and media, and ratiometric sensing robust to environmental drift. In this review, we aim to critically assess and highlight recent development in nanosensors and nanomaterials used for the detection of oxygen and ROS in biological systems, and their future potential use as diagnosis tools.

Synthesis and modification of carbon dots for advanced biosensing application

There has been an explosion of interest in the use of nanomaterials for biosensing applications, and carbonaceous nanomaterials in particular are at the forefront of this explosion. Carbon dots (CDs), a new type of carbon material, have attracted extensive attention due to their fascinating properties, such as small particle size, tunable optical properties, good conductivity, low cytotoxicity, and good biocompatibility. These properties have enabled them to be highly promising candidates for the fabrication of various high-performance biosensors. In this review, we summarize the top-down and bottom-up synthesis routes of CDs, highlight their modification strategies, and discuss their applications in the fields of photoluminescence biosensors, electrochemiluminescence biosensors, chemiluminescence biosensors, electrochemical biosensors and fluorescence biosensors. In addition, the challenges and future prospects of the application of CDs for biosensors are also proposed.

Synthesis and in vitro PDT evaluation of red emission polymer dots (R-CPDs) and pyropheophorbide-α conjugates

Carbon based polymer dots have piqued attention of researchers because of excellent biocompatibility, and good solubility. Most of the p-dots are able to generate ROS which is effective for photodynamic therapy for the treatment of cancer while some photosensitizers such as porphyrins possess some drawbacks such as hydrophobicity, and dark toxicity. Therefore in this study we conjugated red emission carbon based polymer with pyropheophorbide-α through amide condensation and π-π stacking. One pot synthesis of the conjugate was successfully achieved. Their photophysiological properties were studied and structures were characterized by FT-IR, TEM and ¹HNMR. pH- sensitivity of the conjugates was confirmed using fluorescence and UV-vis spectroscopy. Photo toxicity and dark toxicity of the prepared conjugates were evaluated in human esophageal cancer cell line (Eca-109). Hemocompatibility of the synthesized conjugates was evaluated and proved that the conjugates are safe to use for the treatment of tumor. Our results showed the PS doped p-dots had less dark toxicity and increased light toxicity as well as ROS generation was high as compared to precursor drug. Therefore, incorporation of p-dots to porphyrin improved biocompatibility and enhanced the photodynamic effect.

Imaging, Identification and Inhibition of Microorganisms Using AIEgens

Microorganisms, including bacteria, viruses and fungi, are ubiquitous in nature. Some are extremely beneficial to life on Earth, whereas some cause diseases and disrupt normal human physiology. Pathogenic microorganisms can also undergo mutations and develop resistance to antimicrobial agents, which complicates diagnostic and therapeutic regimens. This calls for continuing efforts to develop new strategies and tools that can provide fast, sensitive and accurate diagnosis, as well as effective treatment of ever-evolving infectious diseases. Aggregation-induced emission luminogens (AIEgens) have shown promise in imaging, identification and inhibition of various microbial species. Compared to conventional organic fluorophores, AIEgens can offer improved photostability, and have found utilities in imaging microorganisms. AIEgens have been shown to detect microbial viability and differentiate among different microbial strains. Theranostic AIEgens that integrate imaging and killing of microbes have also been developed. This review highlights examples in the literature where AIEgens have been employed as molecular probes in the imaging, discrimination and killing of bacteria, viruses and fungi.

Supra-Carbon Dots Formed by Fe3+-Driven Assembly for Enhanced Tumor-Specific Photo-Mediated and Chemodynamic Synergistic Therapy

We herein report a facile method to fabricate a multifunctional cancer theranostic nanoplatform via Fe³⁺-driven assembly of photosensitizer (chlorine e6, Ce6)-decorated red emissive carbon dots (Ce6-RCDs). The as-prepared Supra-CDs (i.e., CD clusters; also termed as Fe-Ce6-RCDs) are found to not only retain the intrinsic photosensitization, fluorescence (FL), and photothermal properties of the Ce6-RCDs component but also be endowed with the chemodynamic therapy (CDT) function by the introduced Fe³⁺ via the Fenton reaction that can specifically occur in tumor sites. The suitable size (∼36 nm) of the Supra-CDs enables enhanced tumor accumulation, thus achieving significantly improved FL imaging-guided anticancer performance by combining photodynamic, photothermal, and chemodynamic therapeutic modalities. More interestingly, the multi-subcellular structure (including nucleolus and cytoplasm)-targeting capacity of the Supra-CDs further enhances their therapeutic outcomes. This work not only develops a Fe³⁺-mediated self-assembly approach to construct a multifunctional cancer theranostic nanoplatform but also emphasizes the ion-interference role of the Fe³⁺-mediated CDT in anticancer nanomedicines.

Photodegradation of carbon dots cause cytotoxicity

Carbon dots (CDs) are photoluminescent nanomaterials with wide-ranging applications. Despite their photoactivity, it remains unknown whether CDs degrade under illumination and whether such photodegradation poses any cytotoxic effects. Here, we show laboratory-synthesized CDs irradiated with light degrade into molecules that are toxic to both normal (HEK-293) and cancerous (HeLa and HepG2) human cells. Eight days of irradiation photolyzes 28.6-59.8% of the CDs to <3 kilo Dalton molecules, 1431 of which are detected by high-throughput, non-target high-performance liquid chromatography-quadrupole time-of-flight mass spectrometry. Molecular network and community analysis further reveal 499 cytotoxicity-related molecules, 212 of which contain polyethylene glycol, glucose, or benzene-related structures. Photo-induced production of hydroxyl and alkyl radicals play important roles in CD degradation as affected by temperature, pH, light intensity and wavelength. Commercial CDs show similar photodegraded products and cytotoxicity profiles, demonstrating that photodegradation-induced cytotoxicity is likely common to CDs regardless of their chemical composition. Our results highlight the importance of light in cytocompatibility studies of CDs.

Carbon dots have attracted much attention for biomedical applications but potential degradation and associated toxicity are still poorly understood. Here, the authors report on a study into the photo-degradation of carbon dots, the products produced and associated cytotoxicity.

Red fluorescent carbon dots excited by visible light: cell imaging and visual detection of ammonia gas using PVB films

Red fluorescent carbon dots are used in cell imaging and detection of ammonia gas using PVB films under visible light.

A hyperbranched polysiloxane containing carbon dots with near white light emission

In this work, we prepared a novel hyperbranched polysiloxane containing carbon dots, which can emit near white light with the CIE chromaticity coordinates of (0.301, 0.333) via mixing dual emission at 414 and 532 nm excited at λ_ex = 340 nm.

A Novel Eplerenone Ecofriendly Fluorescent Nanosensor Based on Nitrogen and Sulfur-Carbon Quantum Dots

In this work, a novel ecofriendly optical nanosensor for detection of Eplerenone (EPL) in biological samples was reported. Highly luminescent water-soluble nitrogen and sulfur doped carbon quantum dots (N, S-CQDs) have been prepared successfully. The synthesis was based on the reaction of thiosemicarbazide (TS) as source of N and S and citric acid (CA) as source of carbon in one-step aqueous base reflux treatment. The produced N, S-CQDs have a small particle size in the range of 4.7 nm with a high quantum yield (58.5%) and high emission intensity at 446 nm under excitation wavelength of 370 nm. The unique properties of N, S-CQDs make them useful tool as a nano fluorescent probe for sensitive determination of EPL. EPL has been found to decrease the fluorescence of S, N-CDs significantly through static quenching according to the Stern - Volmer plot. The decreased intensity of S, N-CDs fluorescence was proportional to EPL in the 0.2-3.0 μM range. The limit of detection and quantitation were 0.05 and 0.15 μM, respectively. The assay of EPL by this approach was successfully done in drug formulations and in spiked human serum samples.

Carbon Dots as a Sustainable New Platform for Organic Light Emitting Diode

Over the past 10 years, carbon dots (CDs) synthesized from renewable raw materials have received considerable attention in several fields for their unique photoluminescent properties. Moreover, the synthesis of CDs fully responds to the principles of circular chemistry and the concept of safe-by-design. This review will focus on the different strategies for incorporation of CDs in organic light-emitting devices (OLEDs) and on the study of the impact of CDs properties on OLED performance. The main current research outcomes and highlights are summarized to guide users towards full exploitation of these materials in optoelectronic applications.

Enhanced Proton Conductivity across Protein Biopolymers Mediated by Doped Carbon Nanoparticles

Carbon nanoparticles, known as carbon-dots (C-Dots), are famous for their optoelectronic properties. Here it is shown that C-Dots can also mediate protons, where protein biopolymers are used as the protonic transport matrix. Energy transfer measurements indicate that different doped C-Dots bind to the protein biopolymer in different efficiencies. Electrical impedance measurements reveal enhanced conductance across the protein biopolymer upon C-Dots integration, dependent on the doping type. The enhanced conductivity is attributed to protonic conduction due to the large observed kinetic isotope effect, resulting in one of the highest measured proton conductivity across protein biopolymers. Transistor measurements show that the various doped C-Dots-protein biopolymer exhibit different increase in charge carrier density and in carrier mobility, suggesting different modes of proton transport. The ability of C-Dots to support protonic conduction opens a field of carbon-based protonic nanoparticles and due to the formation simplicity of C-Dots they can be integrated in a variety of protonic devices.

Nanoparticles as suitable messengers for molecular communication

Molecular communication (MoCo) is a new paradigm of bio-inspired communication in which the transport of information occurs through information particles instead of electromagnetic waves. Herein, the enormous potential of nanoparticles in this field is highlighted. The MoCo concept has been extensively modelled both theoretically and computationally within the scientific community, mainly in the field of engineering. We collected the most relevant findings about the implementation of prototypal MoCo platforms by exploiting nanoparticles as informative nanomessengers and herein the theoretical and computational modelling used to design MoCo systems is presented.