Electron transfer in peptides

Selective on-site detection and quantification of polystyrene microplastics in water using fluorescence-tagged peptides and electrochemical impedance spectroscopy

In this study, we developed a method for the on-site selective detection and quantification of microplastics in various water matrices using fluorescence-tagged peptides combined with electrochemical impedance spectroscopy (EIS). Among the types of plastics found in seawater, polystyrene (PS) microplastics were selected. Fluorometry, scanning electron microscopy (SEM), and Raman spectroscopy were used to verify the specific interaction of these peptides with PS spherical particles of different sizes (ranging from 0.1 to 250 µm). Principal component analysis (PCA) was employed to determine the effects of temperature (25-65 °C), incubation time (5 and 10 min), and particle size on plastic-peptide bonding efficiency, based on fluorescence intensity. For each water type (pure, tap, NaCl (0.5 M), and seawater), EIS plots (Nyquist and Bode) were generated. Significant factors affecting the EIS response, including particle size, shape, and material, were analyzed by measuring electrical parameters for different microplastic concentrations (50 ppb to 20 ppm). The EIS parameters changed with increasing plastic concentration, determining a limit of detection (LOD) of 50 ppb (ng/mL) for pure and tap water and 400 ppb for saline water, as the lowest concentration producing a significant change in EIS parameters compared to the baseline. The sensor proved highly effective for detecting microplastics in low ionic strength environments such as pure and tap water. However, in high ionic strength environments like saline and seawater, the detection capability diminished, likely due to the masking effect of ions on the EIS response.

Clicked BODIPY-Fullerene-Peptide Assemblies: Studies of Electron Transfer Processes in Self-Assembled Monolayers on Gold Surfaces

Two BODIPY-C60-peptide assemblies were synthesized by CuAAC reactions of BODIPY-C60 dyads and a helical peptide functionalized with a terminal alkyne group and an azide group, respectively. The helical peptide within these assemblies was functionalized at its other end by a disulfide group, allowing formation of self-assembled monolayers (SAMs) on gold surfaces. Characterizations of these SAMs, as well as those of reference molecules (BODIPY-C60-alkyl, C60-peptide and BODIPY-peptide), were carried out by PM-IRRAS and cyclic voltammetry. BODIPY-C60-peptide SAMs are more densely packed than BODIPY-C60-alkyl and BODIPY-peptide based SAMs. These findings were attributed to the rigid peptide helical conformation along with peptide-peptide and C60-C60 interactions within the monolayers. However, less dense monolayers were obtained with the target assemblies compared to the C60-peptide, as the BODIPY entity likely disrupts organization within the monolayers. Finally, electron transfer kinetics measurements by ultra-fast electrochemistry experiments demonstrated that the helical peptide is a better electron mediator in comparison to alkyl chains. This property was exploited along with those of the BODIPY-C60 dyads in a photo-current generation experiment by converting the resulting excited and/or charge separated states from photo-illumination of the dyad into electrical energy.

The Importance of Spin-Polarized Charge Reorganization in the Catalytic Activity of D-Glucose Oxidase

The reaction of D-glucose oxidase (GOx) with D- and L-glucose was investigated using confocal fluorescence microscopy and Hall voltage measurements, after the enzyme was adsorbed as a monolayer. By adsorbing the enzyme on a ferromagnetic substrate, we verified that the reaction is spin dependent. This conclusion was supported by monitoring the reaction when the enzyme is adsorbed on a Hall device that does not contain any magnetic elements. The spin dependence is consistent with the chiral-induced spin selectivity (CISS) effect; it can be explained by the improved fidelity of the electron transfer process through the chiral enzyme due to the coupling of the linear momentum of the electrons and their spin. Since the reaction studied often serve as a model system for enzymatic activity, the results may suggest the general importance of the spin-dependent electron transfer in bio-chemical processes.

Site-Specific Photochemistry along a Protonated Peptide Scaffold

We present a detailed study of the time-dependent photophysics and photochemistry of a known conformation of the two protonated pentapeptides Leu-enkephalin (Tyrosine-Glycine-Glycine-Phenylalanine-Leucine, YGGFL) and its chromophore-swapped analogue FGGYL, carried out under cryo-cooled conditions in the gas phase. Using ultraviolet-infrared (UV-IR) double resonance, we record excited state IR spectra as a function of time delay between UV and IR pulses. We identify unique Tyr OH stretch transitions due to the S1 state and the vibrationally excited triplet state(s) formed by intersystem crossing, Tn(v). Photofragment mass spectra are recorded out of the S1 origin and following UV-IR double resonance. Several competing site-specific fragmentation pathways are discovered involving peptide backbone cleavage, Tyr side chain loss, and N-terminal NH3 loss mediated by electron transfer. In YGGFL, IR excitation in the S1 state promotes electron transfer (ET) from the aromatic ring to the N-terminal R-NH3+ group leading to loss of neutral NH3. This product channel is missing in FGGYL due to the larger distance for ET from Y(4) to NH3+. Selective loss of the Tyr side chain occurs out of an excited state process following UV excitation and is further enhanced by IR excitation in S1 and Tn(v) states of both YGGFL and FGGYL. Finally, IR excitation in the S1 or Tn(v) states fragments the peptide backbone exclusively at amide(4), producing the b4 cation. We postulate that this selective fragmentation results from intersystem crossing to produce vibrationally excited triplets with enough energy to launch the proton along a proton conduit present in the known starting structure.

Thermo-Chemical Cues-Mediated Strategy to Control Peptide Self-Assembly and Charge Transfer Complexation

Peptide amphiphiles (PAs) are known for their remarkable ability to undergo molecular self-assembly, a process that is highly responsive to the local microenvironment. Herein, we design a pyrene tethered peptide amphiphile Py-VFFAKK, 1 that exhibits pathway-driven self-assembly from metastable nanoparticles to kinetically controlled nanofibers and thermodynamically stable twisted bundles upon modulations in pH, temperature, and chemical cues. The presence of the pyrene moiety ensures donation of the electron to an electron acceptor, namely, 7,7,8,8-tetracyanoquinodimethane (TCNQ), to form a supramolecular charge transfer complex in aqueous solution that was studied in detail with microscopic and spectroscopic techniques. Excitation of the donor species in its excimer state facilitates electron donation to the acceptor moiety, paving away a long-lived charge-separated state that persists for over a nanosecond, as ascertained through transient absorption spectroscopy. Finally, the self-assembled charge transfer complex is explored toward antimicrobial properties with Escherichia coli while maintaining biocompatibility toward L929 mice fibroblast cells.

A novel highly thermostable and stress resistant ROS scavenging metalloprotein from Paenibacillus

Reactive oxygen species (ROS) are unstable metabolites produced during cellular respiration that can cause extensive damage to the body. Here we report a unique structural metalloprotein called RSAPp for the first time, which exhibits robust ROS-scavenging activity, high thermostability, and stress resistance. RSAPp is a previously uncharacterized DUF2935 (domain of unknown function, accession number: cl12705) family protein from Paenibacillus, containing a highly conserved four-helix bundle with binding sites for variable-valence metal ions (Mn2+/Fe2+/Zn2+). Enzymatic characterization results indicated that RSAPp displays the functionality of three different antioxidant enzymes, including superoxide dismutase (SOD), catalase (CAT), and peroxidase (POD). In particular, RSAPp exhibits a significant SOD-like activity that is remarkably effective in eliminating superoxide radicals (up to kcat/KM = 2.27 × 1011 mol-1 s-1), and maintains the catalytical active in a wide range of temperatures (25-100 °C) and pH (pH 2.0-9.0), as well as resistant to high temperature, alkali and acidic pH, and 55 different concentrations of detergent agents, chemical solvents, and inhibitors. These properties make RSAPp an attractive candidate for various industrial applications, including cosmetics, food, and pharmaceuticals.

Designing Quantum Capacitive Peptide Interfaces for Electroanalytical Applications

Redox-active moieties assembled on metallic interfaces have been shown to follow quantum mechanical rules, where the quantum capacitance of the interface (directly associated with the electronic structure of the redox-active moieties) plays a key role in the electron transfer dynamics of the interface. Modifying these interfaces with biological receptors has significant advantages (simplifying molecular diagnostics methods, reducing size, time, and cost while maintaining high sensitivity), enabling the fabrication of miniaturized electroanalytical devices that can compete with traditional ELISA and RT-PCR benchtop assay methods. Owing to their intrinsic characteristics, the use of peptide-based redox-active moieties is a promising chemical route for modifying metallic surfaces, resulting in a high quantum capacitive signal sensitivity. In the present work, different ferrocene-tagged peptides with a structure of Fc-Glu-XX-XX-Cys-NH2 (XX = serine, phenylalanine, glycine) were used to form self-assembled monolayers on gold. The feasibility of using these interfaces in an electroanalytical assay was verified by detecting the NS1 DENV (Dengue Virus) biomarker to compare the efficiency of peptide structures for biosensing purposes. Parameters such as the formal potential of the interface, normalized electronic density of states (DOS), quantum capacitance, and electron transfer rate constants were obtained for Ser-, Phe-, and Gly-peptides. The Gly-peptide structure presented the highest analytical performance for sensing NS1 with a sensitivity of 5.6% per decade and the lowest LOD (1.4 ng mL-1) and LOQ (2.6 ng mL-1), followed by Phe-peptide, whereas Ser-peptide had the lowest performance. This work demonstrates that the use of peptides to fabricate a self-assembled monolayer as a biosensor component has advantages for low-cost point-of-care diagnostics. It also shows that the performance of the sensing interface depends strongly on how the chemistry of the surface is designed as a whole, not only on the redox-active group.

Examining the Effects of Homochirality for Electron Transfer in Protein Assemblies

Protein voltammetry studies of cytochrome c, immobilized on chiral tripeptide monolayer films, reveal the importance of the electron spin and the film's homochirality on electron transfer kinetics. Magnetic film electrodes are used to examine how an asymmetry in the standard heterogeneous electron transfer rate constant arises from changes in the electron spin direction and the enantiomer composition of the tripeptide monolayer; rate constant asymmetries as large as 60% are observed. These findings are rationalized in terms of the chiral induced spin selectivity effect and spin-dependent changes in electronic coupling. Lastly, marked differences in the average rate constant are shown between homochiral ensembles, in which the peptide and protein possess the same enantiomeric form, compared to heterochiral ensembles, where the handedness of the peptide layer is opposite to that of the protein or itself comprises heterochiral building blocks. These data demonstrate a compelling rationale for why nature is homochiral; namely, spin alignment in homochiral systems enables more efficient energy transduction.

Structure of Rhizobium sp. 4-9 histamine dehydrogenase and analysis of the electron transfer pathway to an abiological electron acceptor

Histamine dehydrogenase from the gram-negative bacterium Rhizobium sp. 4-9 (HaDHR) is a member of a small family of dehydrogenases containing a covalently attached FMN, and the only member so far identified to date that does not exhibit substrate inhibition. In this study, we present the 2.1 Å resolution crystal structure of HaDHR. This new structure allowed for the identification of the internal electron transfer pathway to abiological ferrocene-based mediators. Alanine 437 was identified as the exit point of electrons from the Fe₄S₄ cluster. The enzyme was modified with a Ser436Cys mutation to facilitate covalent attachment of a ferrocene moiety. When modified with Fc-maleimide, this new construct demonstrated direct electron transfer from the enzyme to a gold electrode in a histamine concentration-dependent manner without the need for any additional electron mediators.

Reason for the increased electroactivity of extracellular polymeric substances with electrical stimulation: Structural change of α-helix peptide of protein

Electroactivity is an important parameter to assess the ability of the extracellular polymeric substance (EPS) of microorganisms to participate in extracellular respiration. Many reports have found that the electroactivity of microbial sludge could be enhanced with electrical stimulation, but the reason remains unclear. The results of this study showed that the current generation of the three microbial electrolysis cells increased by 1.27-1.76 times during 49 days of electrical stimulation, but the typical electroactive microorganisms were not enriched. Meanwhile, the capacitance and conductivity of EPS of sludge after the electrical stimulation increased by 1.32-1.83 times and 1.27-1.32 times, respectively. In-situ FTIR analysis indicated that the electrical stimulation could lead to the polarization of amide groups in the protein, likely affecting the protein structure related to the electroactivity. Accordingly, the dipole moment of the α-helix peptide of protein of sludge increased from 220 D to 280 D after the electrical stimulation, which was conducive to electron transfer in the α-helix peptide. Moreover, the vertical ionization potential and E_LUMO-E_HOMO energy gap of the C-terminal in the α-helix peptide decreased from 4.43 eV to 4.10 eV and 0.41 eV to 0.24 eV, respectively, which indicated that the α-helix was easier to serve as the electron transfer site of electron hopping. These results meant that the enhancement of the dipole moment of the α-helix peptide unchoked the electron transfer chain of the protein, which was the main reason for the increased electroactivity of EPS protein.

Computational evaluation of transport parameters and logic circuit designing of L-Lysine amino acid stringed to Au, Ag, Cu, Pt, and Pd electrodes

The integrants of proteins, i.e., amino acids, have grossed exceptional recognition for their applications towards designing imminent switching devices. Among 20 amino acids, L-Lysine (i.e., positively charged) has the highest number of CH₂ chains, and such chains affect the rectification ratio in several biomolecules. Towards molecular rectification, we investigate the transport parameters of L-Lysine in conjunction with five different coinage metal electrodes, i.e., Au, Ag, Cu, Pt and Pd to form five distinct devices. We deputize the NEGF-DFT formulism for computing conductance, frontier molecular orbitals, current-voltage, and molecular projected self-Hamiltonian calculations using a self-consistent function. We focus on the most widely used electron exchange correlation combination, i.e., the PBE version of GGA with DZDP basis set. The molecular devices under inquisition exhibit phenomenal rectification ratios (RR) in conjunction with negative differential resistance (NDR) regimes. The nominated molecular device offers a substantial rectification ratio of 45.6 with platinum electrodes and a prominent peak to valley current ratio of 1.78 with copper electrodes. We deduce from these findings that L-Lysine based molecular devices would implicit in future bio-nanoelectronic devices. The OR and AND logic gates are also proposed hinged on highest rectification ratio of L-Lysine-based devices.

Photoinduced Processes in Lysine-Tryptophan-Lysine Tripeptide with L and D Tryptophan

Optical isomers of short peptide Lysine-Tryptophan-Lysine (Lys-{L/D-Trp}-Lys) and Lys-Trp-Lys with an acetate counter-ion were used to study photoinduced intramolecular and intermolecular processes of interest in photobiology. A comparison of L- and D-amino acid reactivity is also the focus of scientists' attention in various specialties because today, the presence of amyloid proteins with D-amino acids in the human brain is considered one of the leading causes of Alzheimer's disease. Since aggregated amyloids, mainly Aβ42, are highly disordered peptides that cannot be studied with traditional NMR and X-ray techniques, it is trending to explore the reasons for differences between L- and D-amino acids using short peptides, as in our article. Using NMR, chemically induced dynamic nuclear polarization (CIDNP) and fluorescence techniques allowed us to detect the influence of tryptophan (Trp) optical configuration on the peptides fluorescence quantum yields, bimolecular quenching rates of Trp excited state, and the photocleavage products formation. Thus, compared with the D-analog, the L-isomer shows a greater Trp excited state quenching efficiency with the electron transfer (ET) mechanism. There are experimental confirmations of the hypothesis about photoinduced ET between Trp and the CONH peptide bond, as well as between Trp and another amide group.

Non-Conventional Peptide Self-Assembly into a Conductive Supramolecular Rope

Structures composed of alternating α and β amino acids can give rise to peculiar secondary structural motifs, which could self-assemble into complex structures of controlled geometries. This work describes the self-assembly properties of an α,β-peptide, containing three units of syn H2-(2-F-Phe)-h-PheGly-OH, able to self-organize on surfaces into a fascinating supramolecular rope. This material was characterized by AFM, electronic conduction and fluorescence measurements. Molecular dynamics simulations showed that this hexapeptide can self-assemble into an antiparallel β-sheet layer, stabilized by intermolecular H-bonds, which, in turn, can self-assemble into many side-by-side layers, due to π-π interactions. As a matter of fact, we demonstrated that in this system, the presence of aromatic residues at the intramolecular interface promoted by the alternation of α,β-amino-acids in the primary sequence, endorses the formation of a super-secondary structure where the aromatic groups are close to each other, conferring to the system good electron conduction properties. This work demonstrates the capability and future potential of designing and fabricating distinctive nanostructures and efficient bioelectronic interfaces based on an α,β-peptide, by controlling structure and interaction processes beyond those obtained with α- or β-peptides alone.

Electron transport via tyrosine-doped oligo-alanine peptide junctions: role of charges and hydrogen bonding

A way of modulating the solid-state electron transport (ETp) properties of oligopeptide junctions is presented by charges and internal hydrogen bonding, which affect this process markedly. The ETp properties of a series of tyrosine (Tyr)-containing hexa-alanine peptides, self-assembled in monolayers and sandwiched between gold electrodes, are investigated in response to their protonation state. Inserting a Tyr residue into these peptides enhances the ETp carried via their junctions. Deprotonation of the Tyr-containing peptides causes a further increase of ETp efficiency that depends on this residue's position. Combined results of molecular dynamics simulations and spectroscopic experiments suggest that the increased conductance upon deprotonation is mainly a result of enhanced coupling between the charged C-terminus carboxylate group and the adjacent Au electrode. Moreover, intra-peptide hydrogen bonding of the Tyr hydroxyl to the C-terminus carboxylate reduces this coupling. Hence, the extent of such a conductance change depends on the Tyr-carboxylate distance in the peptide's sequence.

Helical versus Flat Bis-Ferrocenyl End-Capped Peptides: The Influence of the Molecular Skeleton on Redox Properties

Despite the fact that peptide conjugates with a pendant ferrocenyl (Fc) have been widely investigated, bis-ferrocenyl end-capped peptides are rarely synthetized. In this paper, in addition to the full characterization of the Fc-CO-[L-Dap(Boc)]n-NH-Fc series, we report a comparison of the three series of bis-ferrocenyl homopeptides synthesized to date, to gain insights into the influence of α-amino isobutyric (Aib), 2,3-diamino propionic (Dap) and Cα,β-didehydroalanine (ΔAla) amino acids on the peptide secondary structure and on the ferrocene redox properties. The results obtained by 2D NMR analysis and X-ray crystal structures, and further supported by electrochemical data, evidence different behaviors depending on the nature of the amino acid; that is, the formation of 310-helices or fully extended (2.05-helix) structures. In these foldamers, the orientation of the carbonyl groups in the peptide helix yields a macrodipole with the positive pole on the N-terminal amino acid and the negative pole on the C-terminal amino acid, so that oxidation of the Fc moieties takes place more or less easily depending on the orientation of the macrodipole moment as the peptide chain grows. Conversely, the fully extended conformation adopted by ΔAla flat peptides neither generates a macrodipole nor affects Fc oxidation. The utilization as electrochemical and optical (Circular Dichroism) probes of the two terminal Fc groups, bound to the same peptide chain, makes it possible to study the end-to-end effects of the positive charges produced by single and double oxidations, and to evidence the presence "exciton-coupled" CD among the two intramolecularly interacting Fc groups of the L-Dap(Boc) series.

α-Helix in Cystathionine β-Synthase Enzyme Acts as an Electron Reservoir

The modulation of electron density at the Pyridoxal 5'-phosphate (PLP) catalytic center, because of charge transfer across the α-helix/PLP interface, is the determining factor for the enzymatic activities in the human Cystathionine β-Synthase (hCBS) enzyme. Applying density functional theory calculations, in conjunction with the real space density analysis, we investigated the charge density delocalization across the entire heme-α-helix-PLP electron communication channels. The electron delocalization due to hydrogen bonds at the heme/α-helix and α-helix/PLP interfaces are found to be extended over a very long range, as a result of redistribution of electron densities of the cofactors. Moreover, the internal hydrogen bonds of α-helix that are crucial for its secondary structure also participate in the electron redistribution through the structured hydrogen-bond network. α-Helix is found to accumulate the electron density at the ground state from both of the cofactors and behaves as an electron reservoir for catalytic reaction at the electrophilic center of PLP.

Molecular electronics sensors on a scalable semiconductor chip: A platform for single-molecule measurement of binding kinetics and enzyme activity

Detection of molecular interactions is the foundation for many important biotechnology applications in society and industry, such as drug discovery, diagnostics, and DNA sequencing. This report describes a broadly applicable platform for detecting molecular interactions at the single-molecule scale, in real-time, label-free, and potentially highly multiplexable fashion, using single-molecule sensors on a highly scalable semiconductor sensor array chip. Such chips are both practically manufacturable in the near term, and have a durable long-term scaling roadmap, thus providing an ideal way to bring the power of modern chip technology to the broad area of biosensing. This work also realizes a 50-year-old scientific vision of integrating single molecules into electronic chips to achieve the ultimate miniaturization of electronics.

For nearly 50 years, the vision of using single molecules in circuits has been seen as providing the ultimate miniaturization of electronic chips. An advanced example of such a molecular electronics chip is presented here, with the important distinction that the molecular circuit elements play the role of general-purpose single-molecule sensors. The device consists of a semiconductor chip with a scalable array architecture. Each array element contains a synthetic molecular wire assembled to span nanoelectrodes in a current monitoring circuit. A central conjugation site is used to attach a single probe molecule that defines the target of the sensor. The chip digitizes the resulting picoamp-scale current-versus-time readout from each sensor element of the array at a rate of 1,000 frames per second. This provides detailed electrical signatures of the single-molecule interactions between the probe and targets present in a solution-phase test sample. This platform is used to measure the interaction kinetics of single molecules, without the use of labels, in a massively parallel fashion. To demonstrate broad applicability, examples are shown for probe molecule binding, including DNA oligos, aptamers, antibodies, and antigens, and the activity of enzymes relevant to diagnostics and sequencing, including a CRISPR/Cas enzyme binding a target DNA, and a DNA polymerase enzyme incorporating nucleotides as it copies a DNA template. All of these applications are accomplished with high sensitivity and resolution, on a manufacturable, scalable, all-electronic semiconductor chip device, thereby bringing the power of modern chips to these diverse areas of biosensing.

Electrochemical One-Step Immunoassay Based on Switching Peptides and Pyrolyzed Carbon Electrodes

Switching peptides were designed to bind reversibly to the binding pocket of antibodies (IgG) by interacting with frame regions (FRs). These peptides can be quantitatively released when antigens bind to IgG. As FRs have conserved amino acid sequences, switching peptides can be used as antibodies for different antigens and different source animals. In this study, an electrochemical one-step immunoassay was conducted using switching peptides labeled with ferrocene for the quantitative measurement of analytes. For the effective amperometry of the switching peptides labeled with ferrocene, a pyrolyzed carbon electrode was prepared by pyrolysis of the parylene-C film. The feasibility of the pyrolyzed carbon electrode for the electrochemical one-step immunoassay was determined by analyzing its electrochemical properties, such as its low double-layer capacitance (C_dl), high electron transfer rate (k_app), and wide electrochemical window. In addition, the factors influencing the amperometry of switching peptides labeled with ferrocene were analyzed according to the hydrodynamic radius, the number of intrahydrogen bonds, dipole moments, and diffusion coefficients. Finally, the applicability of the electrochemical one-step immunoassay for the medical diagnosis of the human hepatitis B surface antigen (hHBsAg) was assessed.

Effect of macromolecular crowding on protein oxidation: Consequences on the rate, extent and oxidation pathways

Biological systems are heterogeneous and crowded environments. Such packed milieus are expected to modulate reactions both inside and outside the cell, including protein oxidation. In this work, we explored the effect of macromolecular crowding on the rate and extent of oxidation of Trp and Tyr, in free amino acids, peptides and proteins. These species were chosen as they are readily oxidized and contribute to damage propagation. Dextran was employed as an inert crowding agent, as this polymer decreases the fraction of volume available to other (macro)molecules. Kinetic analysis demonstrated that dextran enhanced the rate of oxidation of free Trp, and peptide Trp, elicited by AAPH-derived peroxyl radicals. For free Trp, the rates of oxidation were 15.0 ± 2.1 and 30.5 ± 3.4 μM min-1 without and with dextran (60 mg mL-1) respectively. Significant increases were also detected for peptide-incorporated Trp. Dextran increased the extent of Trp consumption (up to 2-fold) and induced short chain reactions. In contrast, Tyr oxidation was not affected by the presence of dextran. Studies on proteins, using SDS-PAGE and LC-MS, indicated that oxidation was also affected by crowding, with enhanced amino acid loss (45% for casein), chain reactions and altered extents of oligomer formation. The overall effects of dextran-mediated crowding were however dependent on the protein structure. Overall, these data indicate that molecular crowding, as commonly encountered in biological systems affect the rates, and extents of oxidation, and particularly of Trp residues, illustrating the importance of appropriate choice of in vitro systems to study biological oxidations.

Molecular electronics behaviour of L-aspartic acid using symmetrical metal electrodes

Protein-based electronics is one of the growing areas of bio-nanoelectronics, where novel electronic devices possessing distinctive properties are being fabricated using specific proteins. Furthermore, if the bio-molecule is analysed amidst different electrodes, intriguing properties are elucidated. This research article investigates the electron transport properties of L-aspartic acid (i.e. L-amino acid) bound to symmetrical electrodes of gold, silver, copper, platinum and palladium employing NEGF-DFT approach using self-consistent function. The theoretical work function of different electrodes is calculated using local density approximation and generalized gradient approximation approach. The calculated work function correlates well with the hole tunneling barrier and conductance of the molecular device, which further authenticate the coupling strength between molecule and electrode. Molecule under consideration also exhibits negative differential resistance region and rectification ratio with all the different electrodes, due to its asymmetrical structure. The molecular device using platinum electrodes exhibits the highest peak to valley ratio of 1.38 and rectification ratio of 3.20, at finite bias. The switching characteristics of different molecular device are justified with detailed transmission spectra and MPSH. These results indicate that L-aspartic acid and similar biomolecule can be vital to the growth of Proteotronics.

Expanding the reactivity of inorganic clusters towards proteins: the interplay between the redox and hydrolytic activity of Ce(iv)-substituted polyoxometalates as artificial proteases

The ability of soluble metal-oxo clusters to specifically interact with protein surfaces makes them attractive as potential inorganic drugs and as artificial enzymes. In particular, metal-substituted polyoxometalates (MS-POMs) are remarkably selective in hydrolyzing a range of different proteins. However, the influence of MS-POMs' redox chemistry on their proteolytic activity remains virtually unexplored. Herein we report a highly site-selective hydrolysis of hemoglobin (Hb), a large tetrameric globular protein, by a Ce(iv)-substituted Keggin polyoxometalate (CeIVK), and evaluate the effect of CeIVK's redox chemistry on its reactivity and selectivity as an artificial protease. At pH 5.0, incubation of Hb with CeIVK resulted in strictly selective protein hydrolysis at six Asp-X bonds, two of which were located in the α-chain (α(Asp75-Leu76) and α(Asp94-Pro95)) and five at the β-chain (β(Asp51-Ala52), β(Asp68-Ser69), β(Asp78-Asp79), β(Asp98-Pro99) and β(Asp128-Phe129)). However, increasing the pH of the reaction mixture to 7.4 decreased the CeIVK hydrolytic reactivity towards Hb, resulting in the cleavage of only one peptide bond (β(Asp128-Phe129)). Combination of UV-Vis, circular dichroism and Trp fluorescence spectroscopy indicated similar interactions between Hb and CeIVK at both pH conditions; however, 31P NMR spectroscopy showed faster reduction of CeIVK into the hydrolytically inactive CeIIIK form in the presence of protein at pH 7.4. In agreement with these results, careful mapping of all hydrolyzed Asp-X bonds on the protein structure revealed that the lower reactivity toward the α-chain was consistent with the presence of more redox-active amino acids (Tyr and His) in this subunit in comparison with the β-chain. This points towards a link between the presence of the redox-active sites on the protein surface and efficiency and selectivity of redox-active MS-POMs as artificial proteases. More importantly, the study provides a way to tune the redox and hydrolytic reactivity of MS-POMs towards proteins through adjustment of reaction parameters like temperature and pH.

Ultralong π-Conjugated Bis(terpyridine)metal Polymer Wires Covalently Bound to a Carbon Electrode: Fast Redox Conduction and Redox Diode Characteristics

We developed an efficient and convenient electrochemical method to synthesize π-conjugated redox metal-complex linear polymer wires composed of azobenzene-bridged bis(terpyridine)metal (2-M, M = Fe, Ru) units covalently immobilized on glassy carbon (GC). Polymerization proceeds by electrochemical oxidation of bis(4′-(4-anilino)-2,2′:6′,2″-terpyridine)metal (1-M) in a water–acetonitrile–HClO₄ solution, affording ultralong wires up to 7400 mers (corresponding to ca. 15 μm). Both 2-Fe and 2-Ru undergo reversible redox reactions, and their redox behaviors indicate remarkably fast redox conduction. Anisotropic hetero-metal-complex polymer wires with Fe and Ru centers are constructed via stepwise electropolymerization. The cyclic voltammograms of two hetero-metal-complex polymer wires, GC/[2-Fe]–[2-Ru] (3) and GC/[2-Ru]–[2-Fe] (4), show irreversible redox reactions with opposite electron transfer characteristics, indicating redox diodelike behavior. In short, the present electrochemical method is useful to synthesize polymer wire arrays and to integrate functional molecules on carbon.

Implications of the simple chemical structure of the odorant molecules interacting with the olfactory receptor 1A1

G protein‒coupled receptors (GPCRs), including olfactory receptors, account for the largest group of genes in the human genome and occupy a very important position in signaling systems. Although olfactory receptors, which belong to the broader category of GPCRs, play an important role in monitoring the organism’s surroundings, their actual three-dimensional structure has not yet been determined. Therefore, the specific details of the molecular interactions between the receptor and the ligand remain unclear. In this report, the interactions between human olfactory receptor 1A1 and its odorant molecules were simulated using computational methods, and we explored how the chemically simple odorant molecules activate the olfactory receptor.

A single atom change turns insulating saturated wires into molecular conductors

We present an efficient strategy to modulate tunnelling in molecular junctions by changing the tunnelling decay coefficient, β, by terminal-atom substitution which avoids altering the molecular backbone. By varying X = H, F, Cl, Br, I in junctions with S(CH₂)_(10-18)X, current densities (J) increase >4 orders of magnitude, creating molecular conductors via reduction of β from 0.75 to 0.25 Å⁻¹. Impedance measurements show tripled dielectric constants (ε_r) with X = I, reduced HOMO-LUMO gaps and tunnelling-barrier heights, and 5-times reduced contact resistance. These effects alone cannot explain the large change in β. Density-functional theory shows highly localized, X-dependent potential drops at the S(CH₂)_nX//electrode interface that modifies the tunnelling barrier shape. Commonly-used tunnelling models neglect localized potential drops and changes in ε_r. Here, we demonstrate experimentally that \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\beta \propto 1/\sqrt{{\varepsilon }_{r}}$$\end{document}β∝1/εr, suggesting highly-polarizable terminal-atoms act as charge traps and highlighting the need for new charge transport models that account for dielectric effects in molecular tunnelling junctions.

In molecular junctions, where a molecule is placed between two electrodes, the current passed decays exponentially as a function of length. Here, Chen et al. show that this exponentially attenuation can be controlled by changing a single atom at the end of the molecular wire.

Flat, Cα,β -Didehydroalanine Foldamers with Ferrocene Pendants: Assessing the Role of α-Peptide Dipolar Moments

The foldamer field is continuously expanding as it allows to produce molecules endowed with 3D-structures and functions never observed in nature. We synthesized flat foldamers based on the natural, but non-coded, Cα,β -didehydroalanine α-amino acid, and covalently linked to them two ferrocene (Fc) moieties, as redox probes. These conjugates retain the flat and extended conformation of the 2.05 -helix, both in solution and in the crystal state (X-ray diffraction). Cyclic voltammetry measurements agree with the adoption of the 2.05 -helix, characterized by a negligible dipole moment. Thus, elongated α-peptide stretches of this type are insulators rather than charge conductors, the latter being constituted by peptide α-helices. Also, our homo-tetrapeptide has a N-to-C length of about 18.2 Å, almost double than that (9.7 Å) of an α-helical α-tetrapeptide.

Conformation-dependent charge transport through short peptides

We report on charge transport across single short peptides using the Mechanically Controlled Break Junction (MCBJ) method. We record thousands of electron transport events across single-molecule junctions and with an unsupervised machine learning algorithm, we identify several classes of traces with multifarious conductance values that may correspond to different peptide conformations. Data analysis shows that very short peptides, which are more rigid, show conductance plateaus at low conductance values of about 10^-3G₀ and below, with G₀ being the conductance quantum, whereas slightly longer, more flexible peptides also show plateaus at higher values. Fully stretched peptide chains exhibit conductance values that are of the same order as that of alkane chains of similar length. The measurements show that in the case of short peptides, different compositions and molecular lengths offer a wide range of junction conformations. Such information is crucial to understand mechanism(s) of charge transport in and across peptide-based biomolecules.

Formation of n → π+ interaction facilitating dissociative electron transfer in isolated tyrosine-containing molecular peptide radical cations

Long-range electron transfer in proteins can be rationalized as a sequential short-distance electron-hopping processes via amino acid residues having low ionization energy as relay stations. Tyrosine residues can serve as such redox-active intermediates through one-electron oxidation to form a π-radical cation at its phenol side chain. An electron transfer from a vicinal functional group to this π-electron hole completes an elementary step of charge migration. However, transient oxidized/reduced intermediates formed at those relay stations during electron transfer processes have not been observed. In this study, formation of analog reactive intermediates via electron donor-acceptor coupling is observed by using IRMPD action spectroscopy. An elementary charge migration at the molecular level in model tyrosine-containing peptide radical cations [M]˙+ in the gas phase is revealed with its unusual Cα-Cβ bond cleavage at the side chain of the N-terminal residue. This reaction is induced by the radical character of the N-terminal amino group (-NH2˙+) resulting from an n → π+ interaction between the nonbonding electron pair of NH2 (n) and the π-electron hole at the Tyr side chain (π+). The formation of -NH2˙+ is supported by the IRMPD spectrum showing a characteristic NH2 scissor vibration coupled with Tyr side-chain stretches at 1577 cm-1. This n → π+ interaction facilitates a dissociative electron transfer with NH2 as the relay station. The occurrence of this side-chain cleavage may be an indicator of the formation of reactive conformers featuring the n → π+ interaction.

Features of the crystallization of multicomponent solutions: a dipeptide, its salt and potassium carbonate

Various stages of crystallization of the dipeptide potassium salt on graphite and gold. Possible molecular structures of the dipeptide (a) and its potassium salt (b).

Electronics of peptide- and protein-based biomaterials

Biologically inspired peptide- and protein-based materials are at the forefront of organic bioelectronics research due to their inherent conduction properties and excellent biocompatibility. Peptides have the advantages of structural simplicity and ease of synthesis providing credible prospects for mass production, whereas naturally expressed proteins offer inspiration with many examples of high performance evolutionary optimised bioelectronics properties. We review recent advances in the fundamental conduction mechanisms, experimental techniques and exemplar applications for the bioelectronics of self-assembling peptides and proteins. Diverse charge transfer processes, such as tunnelling, hopping and coupled transfer, are found in naturally occurring biological systems with peptides and proteins as the predominant building blocks to enable conduction in biology. Both theory and experiments allow detailed investigation of bioelectronic properties in order to design functionalized peptide- and protein-based biomaterials, e.g. to create biocompatible aqueous electrodes. We also highlight the design of bioelectronics devices based on peptides/proteins including field-effect transistors, piezoelectric energy harvesters and optoelectronics.

Unravelling Structural Dynamics within a Photoswitchable Single Peptide: A Step Towards Multimodal Bioinspired Nanodevices

The majority of the protein structures have been elucidated under equilibrium conditions. The aim herein is to provide a better understanding of the dynamic behavior inherent to proteins by fabricating a label-free nanodevice comprising a single-peptide junction to measure real-time conductance, from which their structural dynamic behavior can be inferred. This device contains an azobenzene photoswitch for interconversion between a well-defined cis, and disordered trans isomer. Real-time conductance measurements revealed three distinct states for each isomer, with molecular dynamics simulations showing each state corresponds to a specific range of hydrogen bond lengths within the cis isomer, and specific dihedral angles in the trans isomer. These insights into the structural dynamic behavior of peptides may rationally extend to proteins. Also demonstrated is the capacity to modulate conductance which advances the design and development of bioinspired electronic nanodevices.

Directed Electron Transfer in Flavin Peptides with Oligoproline-Type Helical Conformation as Models for Flavin-Functional Proteins

To mimic the charge separation in functional proteins we studied flavin-modified peptides as models. They were synthesized as oligoprolines that typically form a polyproline type-II helix, because this secondary structure supports the electron transfer properties. We placed the flavin as photoexcitable chromophore and electron acceptor at the N-terminus. Tryptophans were placed as electron donors to direct the electron transfer over 0-3 intervening prolines. Spectroscopic studies revealed competitive photophysical pathways. The reference peptide without tryptophan shows dominant non-specific ET dynamics, leading to an ion pair formation, whereas peptides with tryptophans have weak non-specific ET and intensified directed electron transfer. By different excitation wavelengths, we can conclude that the corresponding ion pair state of flavin within the peptide environment has to be energetically located between the S1 and S4 states, whereas the directed electron transfer to tryptophan occurs directly from the S1 state. These photochemical results have fundamental significance for proteins with flavin as redoxactive cofactor.

Nanostructured functional peptide films and their application in C-reactive protein immunosensors

Peptides with an active redox molecule are incorporated into nanostructured films for electrochemical biosensors with stable and controllable physicochemical properties. In this study, we synthesized three ferrocene (Fc)-containing peptides with the sequence Fc-Glu-(Ala)_n-Cys-NH₂, which could form self-assembled monolayers on gold and be attached to antibodies. The peptide with two alanines (n = 2) yielded the immunosensor with the highest performance in detecting C-reactive protein (CRP), a biomarker of inflammation. Using electrochemical impedance-derived capacitive spectroscopy, the limit of detection was 240 pM with a dynamic range that included clinically relevant CRP concentrations. With a combination of electrochemical methods and polarization-modulated infrared reflection-absorption spectroscopy, we identified the chemical groups involved in the antibody-CRP interaction, and were able to relate the highest performance for the peptide with n = 2 to chain length and efficient packing in the organized films. These strategies to design peptides and methods to fabricate the immunosensors are generic, and can be applied to other types of biosensors, including in low cost platforms for point-of-care diagnostics.

Printed-Circuit-Board-Based Two-Electrode System for Electronic Characterization of Proteins

Proteins have been increasingly suggested as suitable candidates for the fabrication of biological computers and other biomolecular-based electronic devices mainly due to their interesting structure-related intrinsic electrical properties. These natural biopolymers are environmentally friendly substitutes for conventional inorganic materials and find numerous applications in bioelectronics. Effective manipulation of protein biomolecules allows for accurate fabrication of nanoscaled device dimensions for miniaturized electronics. The prerequisite, however, demands an interrogation of its various electronic properties prior to understanding the complex charge transfer mechanisms in protein molecules, the knowledge of which will be crucial toward development of such nanodevices. One significantly preferred method in recent times involves the utilization of solid-state sensors where interactions of proteins could be investigated upon contact with metals such as gold. Therefore, in this work, proteins (hemoglobin and collagen) were integrated within a two-electrode system, and the resulting electronic profiles were investigated. Interestingly, structure-related electronic profiles representing semiconductive-like behaviors were observed. These characteristic electronic profiles arise from the metal (Au)-semiconductor (protein) junction, clearly demonstrating the formation of a Schottky junction. Further interpretation of the electronic behavior of proteins was done by the calculation of selected solid-state parameters. For example, the turn-on voltage of hemoglobin was measured to occur at a lower turn-on voltage, indicating the possible influence of the hem group present as a cofactor in each subunit of this tetrameric protein.

First principle approach to elucidate transport properties through L-glutamic acid-based molecular devices using symmetrical electrodes

Protein-based electronics is one of the emerging technology in which inventive electronic devices are being adduced and developed based on the selective actions of specific proteins. The explicit actions can be predicted if the building blocks of proteins (i.e., amino acids) are studied decorously. We emphasize our work on electronic transport properties of L-glutamic acid (i.e., L-amino acid) stringed to gold, silver, and copper electrodes, respectively, to form three distinct devices. For our calculations, we employ NEGF-DFT approach using self-consistent function. Electronic coupling and tunneling barriers between the molecule and the electrodes have been emphasized with an inception of delocalization of molecular orbitals within the device. We observe strong correlation between tunneling barrier and Mulliken charge transfer between molecule and electrodes. The asymmetrical carbon chain (-CH₂) within the molecule exhibits negative differential resistance (NDR) and rectification ratio. The device using molecule with copper electrodes exhibits the highest peak to valley current ratio of 1.84. The rectification ratio of the device with gold, silver, and copper electrodes is 2.35, 2.25, and 15.62, respectively, at finite bias. These results yield fresh insight on the potential of L-glutamic acid like bio-molecule in the emerging field of proteotronics.

Prebiotic Peptides: Molecular Hubs in the Origin of Life

The fundamental roles that peptides and proteins play in today's biology makes it almost indisputable that peptides were key players in the origin of life. Insofar as it is appropriate to extrapolate back from extant biology to the prebiotic world, one must acknowledge the critical importance that interconnected molecular networks, likely with peptides as key components, would have played in life's origin. In this review, we summarize chemical processes involving peptides that could have contributed to early chemical evolution, with an emphasis on molecular interactions between peptides and other classes of organic molecules. We first summarize mechanisms by which amino acids and similar building blocks could have been produced and elaborated into proto-peptides. Next, non-covalent interactions of peptides with other peptides as well as with nucleic acids, lipids, carbohydrates, metal ions, and aromatic molecules are discussed in relation to the possible roles of such interactions in chemical evolution of structure and function. Finally, we describe research involving structural alternatives to peptides and covalent adducts between amino acids/peptides and other classes of molecules. We propose that ample future breakthroughs in origin-of-life chemistry will stem from investigations of interconnected chemical systems in which synergistic interactions between different classes of molecules emerge.

Backbone-Constrained Peptides: Temperature and Secondary Structure Affect Solid-State Electron Transport

The primary sequence and secondary structure of a peptide are crucial to charge migration, not only in solution (electron transfer, ET), but also in the solid-state (electron transport, ETp). Hence, understanding the charge migration mechanisms is fundamental to the development of biomolecular devices and sensors. We report studies on four Aib-containing helical peptide analogues: two acyclic linear peptides with one and two electron-rich alkene-based side chains, respectively, and two peptides that are further rigidified into a macrocycle by a side bridge constraint, containing one or no alkene. ETp was investigated across Au/peptide/Au junctions, between 80 and 340 K in combination with the molecular dynamic (MD) simulations. The results reveal that the helical structure of the peptide and electron-rich side chain both facilitate the ETp. As temperature increases, the loss of helical structure, change of monolayer tilt angle, and increase of thermally activated fluctuations affect the conductance of peptides. Specifically, room temperature conductance across the peptide monolayers correlates well with previously observed ET rate constants, where an interplay between backbone rigidity and electron-rich side chains was revealed. Our findings provide new means to manipulate electronic transport across solid-state peptide junctions.

Tunable oligo-histidine self-assembled monolayer junction and charge transport by a pH modulated assembly

Histidine works as an important mediator in the charge transport process through proteins via its conjugate side group. It can also stabilize a peptide's secondary structure through hydrogen bonding of the imidazole group. In this study, the conformation of the self-assembled monolayer (SAM) and the charge transport of the tailor-made oligopeptide hepta-histidine derivative (7-His) were modulated through the pH control of the assembly environment. Histidine is found to be an efficient tunneling mediator in monolayer junctions with an attenuation factor of β = ∼0.5 Å-1. Successful theoretical model fitting indicates a linear increase in the number of tunneling sites as the 7-His SAM thickness increases, following the deprotonation of histidine. Combined with the ultraviolet photoelectron spectroscopy (UPS) measurements, a modulable charge transport pathway through 7-His with imidazole groups of histidine as tunneling foot stones is revealed. Histidine therefore possesses a large potential for modulable functional (bio)electronic devices.

Superexchange in the fast lane - intramolecular electron transfer in a molecular triad occurs by conformationally gated superexchange

Photoinduced electron transfer via hopping is generally considered to have a stronger temperature dependence than electron transfer via superexchange. However, in this work, an opposite trend of the temperature dependence is observed. This unexpected result is rationalized by considering the specific geometrical and electronic structure of the Ru-bis(terpyridine) photosensitizer.

Doping hepta-alanine with tryptophan: A theoretical study of its effect on the electrical conductance of peptide-based single-molecule junctions

Motivated by a recent experiment [C. Guo et al., Proc. Natl. Acad. Sci. U. S. A. 113, 10785 (2016)], we carry out a theoretical study of electron transport through peptide-based single-molecule junctions. We analyze the pristine hepta-alanine and its functionalizations with a single tryptophan unit, which is placed in three different locations along the backbone. Contrary to expectations from the experiment on self-assembled monolayers, we find that insertion of tryptophan does not raise the electrical conductance and that the resulting peptides instead remain insulating in the framework of a coherent transport picture. The poor performance of these molecules as conductors can be ascribed to the strongly off-resonant transport and low electrode-molecule coupling of the frontier orbitals. Although the introduction of tryptophan increases the energy of the highest occupied molecular orbital (HOMO) of the peptides in the gas phase, the new HOMO states are localized on the tryptophan unit and therefore essentially do not contribute to coherent charge transport.