Advances in functionalization and conjugation mechanisms of dendrimers with iron oxide magnetic nanoparticles

Iron oxide magnetic nanoparticles (MNPs) are crucial in various areas due to their unique magnetic properties. However, their practical use is often limited by instability and aggregation in aqueous solutions. This review explores the advanced technique of dendrimer functionalization to enhance MNP stability and expand their application potential. Dendrimers, with their symmetric and highly branched structure, effectively stabilize MNPs and provide tailored functional sites for specific applications. We summarize key synthetic modifications, focusing on the impacts of dendrimer size, surface chemistry, and the balance of chemical (e.g., coordination, anchoring) and physical (e.g., electrostatic, hydrophobic) interactions on nanocomposite properties. Current challenges such as dendrimer toxicity, control over dendrimer distribution on MNPs, and the need for biocompatibility are discussed, alongside potential solutions involving advanced characterization techniques. This review highlights significant opportunities in environmental, biomedical, and water treatment applications, stressing the necessity for ongoing research to fully leverage dendrimer-functionalized MNPs. Insights offered here aim to guide further development and application of these promising nanocomposites.

Hydrophilic Poly(meth)acrylates by Controlled Radical Branching Polymerization: Hyperbranching and Fragmentation

Topology significantly impacts polymer properties and applications. Hyperbranched polymers (HBPs) synthesized via atom transfer radical polymerization (ATRP) using inimers typically exhibit broad molecular weight distributions and limited control over branching. Alternatively, copolymerization of inibramers (IB), such as α-chloro/bromo acrylates with vinyl monomers, yields HBPs with precise and uniform branching. Herein, we described the synthesis of hydrophilic HB polyacrylates in water by copolymerizing a water-soluble IB, oligo(ethylene oxide) methyl ether 2-bromoacrylate (OEOBA), with various hydrophilic acrylate comonomers. Visible-light-mediated controlled radical branching polymerization (CRBP) with dual catalysis using eosin Y (EY) and copper complexes resulted in HBPs with various molecular weights (M n = 38 000 to 170 000) and degrees of branching (2%-24%). Furthermore, the optimized conditions enabled the successful application of the OEOBA to synthesize linear-hyperbranched block copolymers and hyperbranched polymer protein hybrids (HB-PPH), demonstrating its potential to advance the synthesis of complex macromolecular architecture under environmentally benign conditions. Copolymerization of hydrophilic methacrylate monomer, oligo(ethylene oxide) methyl ether methacrylate (OEOMA500), and inibramer OEOBA was accompanied by fragmentation via β-carbon C-C bond scission and subsequent growth of polymer chains from the fragments. Furthermore, computational studies investigating the fragmentation depending on the IB and comonomer structure supported the experimental observations. This work expands the toolkit of water-soluble inibramers for CRBP and highlights the critical influence of the inibramer structure on reaction outcomes.

Cationic Glucan Dendrimer Gel-Mediated Local Delivery of Anti-OC-STAMP-siRNA for Treatment of Pathogenic Bone Resorption

Osteoclast stimulatory transmembrane protein (OC-STAMP) plays a pivotal role in the promotion of cell fusion during osteoclast differentiation (osteoclastogenesis) in the context of pathogenic bone resorption. Thus, it is plausible that the suppression of OC-STAMP through a bioengineering approach could lead to the development of an effective treatment for inflammatory bone resorptive diseases with minimum side effects. Here, we synthesized two types of spermine-bearing (Spe) cationic glucan dendrimer (GD) gels (with or without C12) as carriers of short interfering RNA (siRNA) to silence OC-STAMP. The results showed that amphiphilic C12-GD-Spe gel was more efficient in silencing OC-STAMP than GD-Spe gel and that the mixture of anti-OC-STAMP siRNA/C12-GD-Spe significantly downregulated RANKL-induced osteoclastogenesis. Also, local injection of anti-OC-STAMP-siRNA/C12-GD-Spe could attenuate bone resorption induced in a mouse model of periodontitis. These results suggest that OC-STAMP is a promising target for the development of a novel bone regenerative therapy and that C12-GD-Spe gel provides a new nanocarrier platform of gene therapies for osteolytic disease.

Visualization of Nanocarriers and Drugs in Cells and Tissue

In this chapter, the visualization of nanocarriers and drugs in cells and tissue is reviewed. This topic is tightly connected to modern drug delivery, which relies on nanoscopic drug formulation approaches and the ability to probe nanoparticulate systems selectively in cells and tissue using advanced spectroscopic and microscopic techniques. We first give an overview of the breadth of this research field. Then, we mainly focus on topical drug delivery to the skin and discuss selected visualization techniques from spectromicroscopy, such as scanning transmission X-ray microscopy and fluorescence lifetime imaging. These techniques rely on the sensitive and quantitative detection of the topically applied drug delivery systems and active substances, either by exploiting their molecular properties or by introducing environmentally sensitive probes that facilitate their detection.

Evaluation of Encapsulation Potential of Selected Star-Hyperbranched Polyglycidol Architectures: Predictive Molecular Dynamics Simulations and Experimental Validation

Polymers, including non-linear copolymers, have great potential in the development of drug delivery systems with many advantages, but the design requires optimizing polymer-drug interactions. Molecular dynamics (MD) simulations can provide insights into polymer-drug interactions for designing delivery systems, but mimicking formulation processes such as drying is often not included in in silico studies. This study demonstrates an MD approach to model drying of systems comprising either hydrophilic tinidazole or hydrophobic clotrimazole drugs with amphiphilic hyperbranched copolyethers. The simulated drying protocol was critical for elucidating drug encapsulation and binding mechanisms. Experimentally, two polymers were synthesized and shown to encapsulate clotrimazole with up to 83% efficiency, guided by interactions with the hydrophobic core observed in simulations. In contrast, tinidazole is associated with surface regions, indicating capacity differences between drug types. Overall, this work highlights MD simulation of the drying process as an important tool for predicting drug-polymer complex behaviour. The modelled formulation protocol enabled high encapsulation efficiency and opened possibilities for the design of delivery systems based on computationally derived binding mechanisms. This demonstrates a computational-experimental approach where simulated drying was integral to elucidating interactions and developing optimized complexes, emphasizing the value of molecular modelling for the development of drug delivery formulations.

Hyperbranched Polymers: Recent Advances in Photodynamic Therapy against Cancer

Hyperbranched polymers are a class of three-dimensional dendritic polymers with highly branched architectures. Their unique structural features endow them with promising physical and chemical properties, such as abundant surface functional groups, intramolecular cavities, and low viscosity. Therefore, hyperbranched-polymer-constructed cargo delivery carriers have drawn increasing interest and are being utilized in many biomedical applications. When applied for photodynamic therapy, photosensitizers are encapsulated in or covalently incorporated into hyperbranched polymers to improve their solubility, stability, and targeting efficiency and promote the therapeutic efficacy. This review will focus on the state-of-the-art studies concerning recent progress in hyperbranched-polymer-fabricated phototherapeutic nanomaterials with emphases on the building-block structures, synthetic strategies, and their combination with the codelivered diagnostics and synergistic therapeutics. We expect to bring our demonstration to the field to increase the understanding of the structure-property relationships and promote the further development of advanced photodynamic-therapy nanosystems.

Overcoming tumor microenvironment obstacles: Current approaches for boosting nanodrug delivery

In order to achieve targeted delivery of anticancer drugs, efficacy improvement, and side effect reduction, various types of nanoparticles are employed. However, their therapeutic effects are not ideal. This phenomenon is caused by tumor microenvironment abnormalities such as abnormal blood vessels, elevated interstitial fluid pressure, and dense extracellular matrix that affect nanoparticle penetration into the tumor's interstitium. Furthermore, nanoparticle properties including size, charge, and shape affect nanoparticle transport into tumors. This review comprehensively goes over the factors hindering nanoparticle penetration into tumors and describes methods for improving nanoparticle distribution by remodeling the tumor microenvironment and optimizing nanoparticle physicochemical properties. Finally, a critical analysis of future development of nanodrug delivery in oncology is further discussed. STATEMENT OF SIGNIFICANCE: This article reviews the factors that hinder the distribution of nanoparticles in tumors, and describes existing methods and approaches for improving the tumor accumulation from the aspects of remodeling the tumor microenvironment and optimizing the properties of nanoparticles. The description of the existing methods and approaches is followed by highlighting their advantages and disadvantages and put forward possible directions for the future researches. At last, the challenges of improving tumor accumulation in nanomedicines design were also discussed. This review will be of great interest to the broad readers who are committed to delivering nanomedicine for cancer treatment.

Shell-Sheddable Dendritic Polyglycerol Sulfates Loaded with Sunitinib for Inhibition of Tumor Angiogenesis

Induced angiogenesis, a specific hallmark of cancer, plays a vital role in tumor progression and can be targeted by inhibitors like sunitinib. Sunitinib is a small hydrophobic molecule suffering from low bioavailability and a short half-life in the bloodstream. To overcome these drawbacks, suitable drug delivery systems need to be developed. In this work dendritic polyglycerol (dPG), a well-known polymer, was functionalized with a sheddable shell. Therefore, aliphatic chains of different lengths (C₅, C₉, C₁₁) were coupled to dPG through a cleavable ester bond. To restore water solubility and improve tumor targeting, the surface was decorated with sulfate groups. The resulting shell-sheddable dPG sulfates were characterized and evaluated regarding their loading capacity and biocompatibility in cell culture. The nine-carbon chain derivative (dPG-TNS) was selected as the best candidate for further experiments due to its high drug loading capacity (20wt%), and a sustained release in vitro. The cellular biocompatibility of the blank carrier up to 1mg/mL was confirmed after 24h incubation on HeLa cells. Furthermore, the shell-cleavability of dPG-TNS under different physiological conditions was shown in a degradation study over four weeks. The activity of sunitinib-loaded dPG-TNS was demonstrated in a tube formation assay on Human umbilical vein endothelial cells (HUVECs). Our results suggest that the drug-loaded nanocarrier is a promising candidate to be further investigated in tumor treatments, as it shows similar efficacy to free sunitinib while overcoming its limitations.

A Comprehensive Review on Processing, Development and Applications of Organofunctional Silanes and Silane-Based Hyperbranched Polymers

Since the last decade, hyperbranched polymers (HBPs) have gained wider theoretical interest and practical applications in sensor technology due to their ease of synthesis, highly branched structure but dimensions within nanoscale, a larger number of modified terminal groups and lowering of viscosity in polymer blends even at higher HBP concentrations. Many researchers have reported the synthesis of HBPs using different organic-based core-shell moieties. Interestingly, silanes, as organic-inorganic hybrid modifiers of HBP, are of great interest as they resulted in a tremendous improvement in HBP properties like increasing thermal, mechanical and electrical properties compared to that of organic-only moieties. This review focuses on the research progress in organofunctional silanes, silane-based HBPs and their applications since the last decade. The effect of silane type, its bi-functional nature, its influence on the final HBP structure and the resultant properties are covered in detail. Methods to enhance the HBP properties and challenges that need to be overcome in the near future are also discussed.

Polylactic-Containing Hyperbranched Polymers through the CuAAC Polymerization of Aromatic AB2 Monomers

We report on the synthesis and characterization of a novel class of hyperbranched polymers, in which a copper(I)-catalyzed alkyne azide cycloaddition (CuAAC) reaction (the prototypical "click" reaction) is used as the polymerization step. The AB₂ monomers bear two azide functionalities and one alkyne functionality, which have been installed onto a 1,3,5 trisubstituted benzene aromatic skeleton. This synthesis has been optimized in terms of its purification strategies, with an eye on its scalability for the potential industrial applications of hyperbranched polymers as viscosity modifiers. By taking advantage of the modularity of the synthesis, we have been able to install short polylactic acid fragments as the spacing units between the complementary reactive azide and alkyne functionalities, aiming to introduce elements of biodegradability into the final products. The hyperbranched polymers have been obtained with good molecular weights and degrees of polymerization and branching, testifying to the effectiveness of the synthetic design. Simple experiments on glass surfaces have highlighted the possibility of conducting the polymerizations and the formation of the hyperbranched polymers directly in thin films at room temperature.

Enhanced delivery of quercetin and doxorubicin using β-cyclodextrin polymer to overcome P-glycoprotein mediated multidrug resistance

In this study, we prepared a β-cyclodextrin polymer (β-CDP) co-loaded quercetin (QCT) and doxorubicin (DOX) nanocarrier (β-CDP/QD NCs) by freeze-dried method to combat P-glycoprotein (P-gp) mediated multidrug resistance (MDR) in KB-Ch^R 8-5 cancer cells. Various microscopic and spectroscopic techniques were employed to characterize the prepared nanocarrier. The molecular docking studies confirm the effective binding interactions of QCT and DOX with the synthesized β-CD polymer. The in vitro drug release study illustrates the sustainable release of DOX and QCT from the β-CDP nanocarrier. Further, we noticed that the QCT released from the β-CDP nanocarrier improved the intracellular availability of DOX via modulating P-gp drug efflux function in KB-Ch^R 8-5 cells and MCF-7/DOX cancer cells. Cell uptake results confirmed the successful internalization of DOX in KB-Ch^R 8-5 cells compared with free DOX. Cell-based assays such as nuclear condensation, alteration in the mitochondrial membrane potential (MMP), and apoptosis morphological changes confirmed the enhanced anticancer effect of β-CDP/QD NCs in the resistant cancer cells. Hence, QCT and DOX co-loaded β-CDP may be considered effective in achieving maximum cell death in the P-gp overexpressing MDR cancer cells.

Unimolecular Micelles from Randomly Grafted Arborescent Copolymers with Different Core Branching Densities: Encapsulation of Doxorubicin and In Vitro Release Study

A series of amphiphilic arborescent copolymers of generations G1 and G2 with an arborescent poly(γ-benzyl L-glutamate) (PBG) core and poly(ethylene oxide) (PEO) chain segments in the shell, PBG-g-PEO, were synthesized and evaluated as drug delivery nanocarriers. The PBG building blocks were generated by ring-opening polymerization of γ-benzyl L-glutamic acid N-carboxyanhydride (Glu-NCA) initiated with n-hexylamine. Partial or full deprotection of the benzyl ester groups followed by coupling with PBG chains yielded a comb-branched (arborescent polymer generation zero or G0) PBG structure. Additional cycles of deprotection and grafting provided G1 and G2 arborescent polypeptides. Side chains of poly(ethylene oxide) were then randomly grafted onto the arborescent PBG substrates to produce amphiphilic arborescent copolymers. Control over the branching density of G0PBG was investigated by varying the length and the deprotection level of the linear PBG substrates used in their synthesis. Three G0PBG cores with different branching densities, varying from a compact and dense to a loose and more porous structure, were thus synthesized. These amphiphilic copolymers behaved similar to unimolecular micelles in aqueous solutions, with a unimodal number- and volume-weighted size distributions in dynamic light scattering measurements. It was demonstrated that these biocompatible copolymers can encapsulate hydrophobic drugs such as doxorubicin (DOX) within their hydrophobic core with drug loading efficiencies of 42-65%. Sustained and pH-responsive DOX release was observed from the unimolecular micelles, which suggests that they could be useful as drug nanocarriers for cancer therapy.

Visible-Light-Mediated Controlled Radical Branching Polymerization in Water

Hyperbranched polymethacrylates were synthesized by green-light-induced atom transfer radical polymerization (ATRP) under biologically relevant conditions in the open air. Sodium 2-bromoacrylate (SBA) was prepared in situ from commercially available 2-bromoacrylic acid and used as a water-soluble inibramer to induce branching during the copolymerization of methacrylate monomers. As a result, well-defined branched polymethacrylates were obtained in less than 30 min with predetermined molecular weights (36 000<M_n <170 000), tunable degree of branching, and low dispersity values (1.14≤Đ≤1.33). Moreover, the use of SBA inibramer enabled the synthesis of bioconjugates with a well-controlled branched architecture.

Robust Construction of Supersmall Zwitterionic Micelles Based on Hyperbranched Polycarbonates Mediates High Tumor Accumulation

Despite the numerous advantages of nanomedicines, their therapeutic efficacy is hampered by biological barriers, including fast in vivo clearance, poor tumor accumulation, inefficient penetration, and cellular uptake. Herein, cross-linked supersmall micelles based on zwitterionic hyperbranched polycarbonates can overcome these challenges for efficiently targeted drug delivery. Biodegradable acryloyl/zwitterion-functionalized hyperbranched polycarbonates are synthesized by a one-pot sequential reaction of Michael-type addition and ring-opening polymerization, followed by controlled modification with carboxybetaine thiol. Cross-linked supersmall zwitterionic micelles (X-CBMs) are readily prepared by straightforward self-assembly and UV cross-linking. X-CBMs exhibit prolonged blood circulation because of their cross-linked structure and zwitterion decoration, which resist protein corona formation and facilitate escaping RES recognition. Combined with the advantage of supersmall size (7.0 nm), X-CBMs mediate high tumor accumulation and deep penetration, which significantly enhance the targeted antitumor outcome against the 4T1 tumor model by administration of the paclitaxel (PTX) formulation (X-CBM@PTX).

Vancomycin-nanofunctionalized peptide-enriched silk fibroin to prevent methicillin-resistant Staphylococcus epidermidis-induced femoral nonunions in rats

Introduction

Implant-related infections and infected fractures are significant burdens in orthopedics. Staphylococcus epidermidis is one of the main causes of bone infections related to biofilm formation upon implants. Current antibiotic prophylaxis/therapy is often inadequate to prevent biofilm formation and results in antibiotic resistance. The development of bioactive materials combining antimicrobial and osteoconductive properties offers great potential for the eradication of microorganisms and for the enhancement of bone deposition in the presence of infections. The purpose of this study is to prevent the development of methicillin-resistant S. epidermidis (MRSE)-infected nonunion in a rat model.

Methods

To this end, a recently developed in our laboratories bioactive material consisting of antibiotic-loaded nanoparticles based on carboxylic acid functionalized hyperbranched aliphatic polyester (CHAP) that are integrated into peptide-enriched silk fibroin sponges with osteoconductive properties (AFN-PSF) was employed, whose biocompatibility and microbiological tests provided proof of its potential for the treatment of both orthopedic and dental infections. In particular, non-critical femoral fractures fixed with plates and screws were performed in Wistar rats, which were then randomly divided into three groups: 1) the sham control (no infection, no treatment); 2) the control group, infected with MRSE and treated with peptide-enriched silk fibroin sponges incorporating non-drug-loaded functionalized nanoparticles (PSF); 3) the treated group, infected with MRSE and treated with peptide-enriched silk fibroin sponges incorporating vancomycin-loaded functionalized nanoparticles (AFN-PSF). After 8 weeks, bone healing and osteomyelitis were clinically assessed and evaluated by micro-CT, microbiological and histological analyses.

Results

The sham group showed no signs of infection and complete bone healing. The PSF group failed to repair the infected fracture, displaying 75% of altered bone healing and severe signs of osteomyelitis. The AFN-PSF treated group reached 70% of fracture healing in the absence of signs of osteomyelitis, such as abscesses in the cortical and intraosseous compartments and bone necrosis with sequestra.

Discussion

AFN-PSF sponges have proven effective in preventing the development of infected nonunion in vivo. The proposed nanotechnology for local administration of antibiotics can have a significant impact on patient health in the case of orthopedic infections.

Self-Healable, Injectable Hydrogel with Enhanced Clotrimazole Solubilization as a Potential Therapeutic Platform for Gynecology

Injectable, self-healing hydrogels with enhanced solubilization of hydrophobic drugs are urgently needed for antimicrobial intravaginal therapies. Here, we report the first hydrogel systems constructed of dynamic boronic esters cross-linking unimolecular micelles, which are a reservoir of antifungal hydrophobic drug molecules. The selective hydrophobization of hyperbranched polyglycidol with phenyl units in the core via ester or urethane bonds enabled the solubilization of clotrimazole, a water-insoluble drug of broad antifungal properties. The encapsulation efficiency of clotrimazole increases with the degree of the HbPGL core modification; however, the encapsulation is more favorable in the case of urethane derivatives. In addition, the rate of clotrimazole release was lower from HbPGL hydrophobized via urethane bonds than with ester linkages. In this work, we also revealed that the hydrophobization degree of HbPGL significantly influences the rheological properties of its hydrogels with poly(acrylamide-ran-2-acrylamidephenylboronic acid). The elastic strength of networks (G_N) and the thermal stability of hydrogels increased along with the degree of HbPGL core hydrophobization. The degradation of the hydrogel constructed of the neat HbPGL was observed at approx. 40 °C, whereas the hydrogels constructed on HbPGL, where the monohydroxyl units were modified above 30 mol %, were stable above 50 °C. Moreover, the flow and self-healing ability of hydrogels were gradually decreased due to the reduced dynamics of macromolecules in the network as an effect of increased hydrophobicity. The changes in the rheological properties of hydrogels resulted from the engagement of phenyl units into the intermolecular hydrophobic interactions, which besides boronic esters constituted additional cross-links. This study demonstrates that the HbPGL core hydrophobized with phenyl units at 30 mol % degrees via urethane linkages is optimal in respect of the drug encapsulation efficiency and rheological properties including both self-healable and injectable behavior. This work is important because of a proper selection of a building component for the construction of a therapeutic hydrogel platform dedicated to the intravaginal delivery of hydrophobic drugs.

Biodegradable core-multishell nanocarrier: Topical tacrolimus delivery for treatment of dermatitis

Two challenges in topical drug delivery to the skin include solubilizing hydrophobic drugs in water-based formulations and increasing drug penetration into the skin. Polymeric core-multishell nanocarrier (CMS), particularly the novel biodegradable CMS (bCMS = hPG-PCL_1.1K-mPEG_2k-CMS) have shown both advantages on excised skin ex vivo. Here, we investigated topical delivery of tacrolimus (TAC; > 500 g/mol) by bCMS in a hydrogel on an oxazolone-induced model of dermatitis in vivo. As expected, bCMS successfully delivered TAC into the skin. However, in vivo they did not increase, but decrease TAC penetration through the stratum corneum compared to ointment. Differences in the resulting mean concentrations were mostly non-significant in the skin (epidermis: 35.7 ± 20.9 ng/cm² for bCMS vs. 92.6 ± 62.7 ng/cm² for ointment; dermis: 76.8 ± 26.8 ng/cm²vs 118.2 ± 50.4 ng/cm²), but highly significant in blood (plasma: 1.1 ± 0.4 ng/ml vs 11.3 ± 9.3 ng/ml; erythrocytes: 0.5 ± 0.2 ng/ml vs 3.4 ± 2.4 ng/ml) and liver (0.01 ± 0.01 ng/mg vs 0.03 ± 0.01 ng/mg). bCMS were detected in the stratum corneum but not in viable skin or beyond. The therapeutic efficacy of TAC delivered by bCMS was equivalent to that of standard TAC ointment. Our results suggest that bCMS may be a promising carrier for the topical delivery of TAC. The quantitative difference to previous results should be interpreted in light of structural differences between murine and human skin, but highlights the need as well as potential methods to develop more a complex ex vivo analysis on human skin to ensure quantitative predictive value.

Polymer-drug conjugates: Design principles, emerging synthetic strategies and clinical overview

Adagen, an enzyme replacement treatment for adenosine deaminase deficiency, was the first protein-polymer conjugate to be approved in early 1990s. Post this regulatory approval, numerous polymeric drugs and polymeric nanoparticles have entered the market as advanced or next-generation polymer-based therapeutics, while many others have currently been tested clinically. The polymer conjugation to therapeutic moiety offers several advantages, like enhanced solubilization of drug, controlled release, reduced immunogenicity, and prolonged circulation. The present review intends to highlight considerations in the design of therapeutically effective polymer-drug conjugates (PDCs), including the choice of linker chemistry. The potential synthetic strategies to formulate PDCs have been discussed along with recent advancements in the different types of PDCs, i.e., polymer-small molecular weight drug conjugates, polymer-protein conjugates, and stimuli-responsive PDCs, which are under clinical/preclinical investigation. Current impediments and regulatory hurdles hindering the clinical translation of PDC into effective therapeutic regimens for the amelioration of disease conditions have been addressed.

Drug-dendrimer complexes and conjugates: Detailed furtherance through theory and experiments

Dendritic nanovectors-based drug delivery has gained significant attention in the past couple of decades. Dendrimers play a crucial role in deciding the solubility of sparingly soluble drug molecules and help in improving pharmacokinetics. A few important steps in drug delivery through dendrimers, such as drug encapsulation, formulation, and target-specific delivery, play an important role in deciding the fate of a drug molecule. It is also of prime importance to understand the interactions between a drug molecule and dendrimers at atomistic levels to decode the mechanism of action of drug-dendrimer complexes and their reliability in terms of drug delivery. Colossal progress in current experimental and computational approaches in the field has resulted in a vast amount of data that needs to be curated to be further implemented efficiently. Improved computational power has led to greater accuracy and prompt predictions of properties of drug-dendrimer complexes and their mechanism of action. The current review encapsulates the pioneering work in the field, experimental achievements in terms of drug delivery, and newer computational techniques employed in the advancement of the field.

Novel Adhesive Nanocarriers Based on Mussel-Inspired Polyglycerols for the Application onto Mucosal Tissues

A synthetic route for adhesive core-multishell (CMS) nanocarriers for application to the oral mucosa was established using mussel-inspired catechol moieties. The three CMS nanocarriers with 8%, 13%, and 20% catechol functionalization were evaluated for loading capacity using Nile red, showing an overall loading of 1 wt%. The ability of Nile red loaded and functionalized nanocarriers to bind to a moist mucosal surface was tested in two complementary adhesion assays under static and dynamic conditions using monolayers of differentiated gingival keratinocytes. Adhesion properties of functionalized nanocarriers were compared to the adhesion of the non-functionalized nanocarrier. In both assays, the CMS nanocarrier functionalized with 8% catechol exhibited the strongest adhesion compared to its catechol-free counterpart and the CMS nanocarriers functionalized with 13% and 20% catechol.

Synthesis, characterisation and evaluation of hyperbranched N-(2-hydroxypropyl) methacrylamides for transport and delivery in pancreatic cell lines in vitro and in vivo

Hyperbranched polymers have many promising features for drug delivery, owing to their ease of synthesis, multiple functional group content, and potential for high drug loading with retention of solubility. Here we prepared hyperbranched N-(2-hydroxypropyl)methacrylamide (HPMA) polymers with a range of molar masses and particle sizes, and with attached dyes, radiolabel or the anticancer drug gemcitabine. Reversible addition-fragmentation chain transfer (RAFT) polymerisation enabled the synthesis of pHPMA polymers and a gemcitabine-comonomer functionalised pHPMA polymer pro-drug, with diameters of the polymer particles ranging from 7-40 nm. The non-drug loaded polymers were well-tolerated in cancer cell lines and macrophages, and were rapidly internalised in 2D cell culture and transported efficiently to the centre of dense pancreatic cancer 3D spheroids. The gemcitabine-loaded polymer pro-drug was found to be toxic both to 2D cultures of MIA PaCa-2 cells and also in reducing the volume of MIA PaCa-2 spheroids. The non-drug loaded polymers caused no short-term adverse effects in healthy mice following systemic injection, and derivatives of these polymers labelled with ⁸⁹Zr-were tracked for their distribution in the organs of healthy and MIA PaCa-2 xenograft bearing Balb/c nude mice. Tumour accumulation, although variable across the samples, was highest in individual animals for the pHPMA polymer of ∼20 nm size, and accordingly a gemcitabine pHPMA polymer pro-drug of ∼18 nm diameter was evaluated for efficacy in the tumour-bearing animals. The efficacy of the pHPMA polymer pro-drug was very similar to that of free gemcitabine in terms of tumour growth retardation, and although there was a survival benefit after 70 days for the polymer pro-drug, there was no difference at day 80. These data suggest that while polymer pro-drugs of this type can be effective, better tumour targeting and enhanced in situ release remain as key obstacles to clinical translation even for relatively simple polymers such as pHPMA.

A multifunctional α-Fe2O3@PEDOT core-shell nanoplatform for gene and photothermal combination anticancer therapy

Exploration of versatile nanoplatforms within one single nanostructure for multidisciplinary treatment modalities, especially achieving a synergistic therapeutic efficacy of combinational gene/photothermal cancer therapy is still a great challenge in biomedicine and nanotechnology. In this study, a unique photothermal nanocarrier has successfully been designed and developed for a combination of gene therapy (GT) and photothermal therapy (PTT) of cancer cells. Surface-engineered iron oxides (α-Fe₂O₃) nanoparticles (NPs) with poly(3,4-ethylenedioxythiophene) (PEDOT) polymer coatings are synthesized using a one-pot in situ oxidative polymerization method. The results show that the as-prepared α-Fe₂O₃@PEDOT core-shell NPs with a uniform particle size exhibit positively charged surfaces, facilitating efficient siRNA Bcl-2 (B-cell lymphoma-2) uptake for delivery to breast cancer cells. More importantly, α-Fe₂O₃@PEDOT core-shell NPs not only display good biocompatibility and water dispersibility but also strong optical absorption enhancement in the Vis-NIR region as compared to α-Fe₂O₃ NPs. The obtained α-Fe₂O₃@PEDOT core-shell NPs show an efficient photothermal conversion efficacy (η = 54.3%) and photostability under NIR laser irradiation. As a result, both in vitro and in vivo biological studies on two types of breast cancer cells/tumors treated with α-Fe₂O₃@PEDOT-siRNA nanocomplexes demonstrate high cancer cell apoptosis and tumor inhibition induced by synergistic GT/PTT therapy under mild conditions compared to an individual GT or PTT alone. Taken together, this is the first example of the use of an α-Fe₂O₃@PEDOT core-shell nanoagent as a siRNA delivery nanocarrier for highly effective gene/photothermal combination anticancer therapy.

Chain-growth click copolymerization for the synthesis of branched copolymers with tunable branching densities

A facile synthesis of branched polymers with regulated molecular weights, low dispersity and freely tuned branching densities is reported.

Review of photoresponsive and glycoside dendrimers in biomaterials and sensors applications

Dendrimers are branched molecules with well-defined lengths, shapes, molecular weights, and monodispersity in comparison to linear polymers.

Unique Functions and Applications of Rigid Dendrimers Featuring Radial Aromatic Chains

Dendrimers, which are highly branched polymers and regarded as huge single molecules, are interesting substances from the aspect of not only polymer chemistry but also molecular chemistry. Various applications in materials science and life science have been investigated by taking advantage of the radially layered structures and intramolecular nanospaces of dendrimers. Most dendrimers have flexible structures that originate from their organic chains which contain many sp³-type atoms, while relatively rigid dendrimers composed only of sp²-type atoms have rarely been reported. It has been recently clarified that such rigid dendrimers exhibit a specific aromatic property not found in other materials. Dendritic phenylazomethines (DPAs), as one of the rigid dendrimers, have only sp²-type C and N atoms and possess a radially branched π-conjugation system in their own macromolecular chains. Such geometric and electronic structures heighten the electron density at the core of the dendrimer and induce an intramolecular potential gradient, which affords unique reactivities that lead to extraordinary functions. This unique property of the rigid dendrimers can be regarded as a new atypical electronic state based on radial aromatic chains not found in conventional aromatic compounds containing spherical aromaticity, Möbius aromaticity, metal aromaticity, and conductive polymers. Therefore, this as-yet-unknown characteristic is expected to contribute to the further development of fundamental and materials chemistry.In this Account, we highlight the rigid DPA dendrimers and their peculiar atomically precise and selective assembly behaviors that originate from the radial aromatic chains. One of the most noteworthy attainments based on the radial aromatic chains is the precise synthesis of a multimetallic multinuclear complex of a dendrimer containing a total of 13 elements. Next, we describe the electrochemical and catalytic functionalization of such multinuclear dendrimer complexes and the construction of supramolecular nanoarchitectures by the polymerization of DPAs. These complexes exhibit encapsulation-release switching of guests and additive-free catalytic ability similar to proteins and enzymes. Such selective and accurate control of the intramolecular assembly of guests and the intermolecular arrangement of hosts realized by the radial aromatic chains of dendrimers will enable supramolecular chemistry and biochemistry to be linked from a new aspect. In addition, the multimetallic multinuclear complexes of dendrimers afford a novel approach to precisely synthesize sub-nanoparticles with ultrasmall particle sizes (1 nm) that have been technically difficult to obtain by conventional nanotechnology. We discuss the method for the synthesis of these sub-nanoparticles with well-controlled atomicity and composition using DPA complexes as a template and recent advances to reveal their specific physical and chemical properties. These results suggest that the unique electronic states induced in such radial aromatics could play an important role in the development of next-generation chemistry.

Advances in self-assembling of pH-sensitive polymers: A mini review on dissipative particle dynamics

Dissipative Particle Dynamics (DPD) is a mesoscopic simulation program used to simulate the behavior of complex fluids. This work systematically reviews the use of DPD to simulate the self-assembly process of pH-sensitive drug-loaded nanoparticles. pH-sensitive drug-loaded nanoparticles have the characteristics of good targeting and slow release in the body, which is an ideal method for treating cancer and other diseases. As an excellent simulation method, DPD can help people explore the loading and release laws of drugs with complex molecular structures and has extensive applications in other medical fields. This article reviews the self-assembly process of pH-sensitive polymers under neutral conditions and explores the factors that affect the self-assembly structure. It points out that different hydrophilic-hydrophobic ratios, molecular structures, and component distributions will affect the morphology, stability and drug carrying capacity of micelles. This article also introduces the release mechanism of the drug in detail and introduces the factors that affect the release. This article can help relevant researchers to follow the latest advances in the DPD simulation and pH-sensitive drug nano-carrier and insight people to investigate the further application of DPD simulation in biomedical science.

Design and synthesis of curcumin nanostructures: Evaluation of solubility, stability, antibacterial and antioxidant activities

By coupling a quaternary pyridinium compound and curcumin (CM), a new antimicrobial agent called CP was obtained. The poor water-solubility was the most important limiting factor in the use of CM and CP. To address this problem, a hydrophilic hyperbranched polyglycerol (PG) was synthesized and reacted with CM and CP via Schiff base reaction to form two new macromolecules. Due to the presence of polymer, the solubility and stability of CM and CP increased significantly in aqueous media. Since the new macromolecules were including the hydrophilic polymeric and curcumin hydrophobic units, they self-assembled into spherical nanostructures, which were characterized by Field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) images. The synthetic nanostructures exhibited a controlled release of curcumin unit in the acidic environment. In vitro experiments showed that the new macromolecules are potent antibacterial and antioxidant agents.

Effect of Branching Degree of Dendritic Polyglycerols on Plasma Protein Adsorption: Relationship between Hydration States and Surface Morphology

This study focuses on dendritic glycerols and investigates the construction of biocompatible surfaces by understanding how differences in the branching of these molecules change the interactions with the biological components. The two molecules, polyglycerol dendrimer (PGD), which has a completely branched structure, and hyperbranched polyglycerol (HPG), which has an incompletely branched structure, are compared and the differences in branching are evaluated. It is shown that PGD has a little bit more intermediate water than HPG, which reflects the differences in the branching. The effect of surface state on the adsorption of the plasma proteins, human serum albumin (HSA), fibrinogen (Fib), and fibronectin (FN), is discussed by modifying a glass surface using these molecules with different hydration states. The adsorption of HSA decreases to several percent for HPG and 10% for PGD compared to unmodified substrate. Although the adsorption of Fib decreases to 5% for HPG, an increase to 150% is observed for PGD. Since this specific Fib adsorption observed only onto PGD is suppressed in the cases of a mixed solution of HSA and Fib or sequentially using HSA solution and then Fib solution, it is thought that the Vroman effect is suppressed on the PGD-modified surface. Furthermore, when AFM measurements are performed in PBS to understand the surface roughness, PGD is found to be more highly non-uniform. Because of this, the nanometer scale roughness that is significantly observed only on the PGD-modified surface is thought to have an effect on the characteristic adsorption properties of Fib. Thus, although both PGD and HPG with different branching have intermediate water, the proportion differs between PGD and HPG. Therefore, it is found that differences occur in the plasma protein adsorption mechanisms depending on the coordinates and density of hydroxyl groups within the molecules.

Size, shape, charge and "stealthy" surface: Carrier properties affect the drug circulation time in vivo

The present review sets out to discuss recent developments of the effects and mechanisms of carrier properties on their circulation time. For most drugs, sufficient in vivo circulation time is the basis of high bioavailability. Drug carrier plays an irreplaceable role in helping drug avoid being quickly recognized and cleared by mononuclear phagocyte system, to give drug enough time to arrive at targeted organ and tissue to play its therapeutic effect. The physical and chemical properties of drug carriers, such as size, shape, surface charge and surface modification, would affect their in vivo circulation time, metabolic behavior and biodistribution. The final circulation time of carriers is determined by the balance between macrophage recognitions, blood vessel penetration and urine excretion. Therefore, when designing the drug delivery system, we should pay much attention to the properties of drug carriers to get enough in vivo circulation time to arrive at target site eventually. This article mainly reviews the effect of carrier size, size, surface charge and surface properties on its circulation time in vivo, and discusses the mechanism of these properties affecting circulation time. This review has reference significance for the research of long-circulation drug delivery system.

Theragnostic nanomotors: Successes and upcoming challenges

The idea of "fantastic voyagers" carrying out medical tasks within the human body has existed as part of popular culture for many decades. The concept revolved around a miniaturized robot that can travel inside the human body and perform complicated functions such as surgery, navigation of otherwise inaccessible biological environments, and delivery of therapeutics. Since the last decade, significant developments have occurred in this arena that are yet to enter mainstream biomedical practises. Here, we define the challenges to make this fiction into reality. We begin by chalking the journey from pills, nanoparticles, and then to micro-nanomotors. The review describes the principles, physicochemical contexts, and advantages that micro-nanomotors provide. The article then describes micro-nanomotors' obstacles such as maneuverability, in vivo imaging, toxicity, and biodistribution. This article is categorized under: Diagnostic Tools > In Vivo Nanodiagnostics and Imaging Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.

Oxidation-Sensitive Core-Multishell Nanocarriers for the Controlled Delivery of Hydrophobic Drugs

A synthetic route for oxidation-sensitive core-multishell (osCMS) nanocarriers was established, and their drug loading and release properties were analyzed based on their structural variations. The nanocarriers showed a drug loading of 0.3-3 wt % for the anti-inflammatory drugs rapamycin and dexamethasone and the photosensitizer meso-tetra-hydroxyphenyl-porphyrin (mTHPP). Oxidative processes of the nanocarriers were probed in vitro by hydrogen peroxide, and the degradation products were identified by infrared spectroscopy supported by ab initio calculations, yielding mechanistic details on the chemical changes occurring in redox-sensitive nanocarriers. Oxidation-triggered drug release of the model drug Nile Red measured and assessed by time-dependent fluorescence spectroscopy showed a release of up to 80% within 24 h. The drug delivery capacity of the new osCMS nanocarriers was tested in ex vivo human skin with and without pretreatments to induce local oxidative stress. It was found that the delivery of mTHPP was selectively enhanced in skin under oxidative stress. The number and position of the thioether groups influenced the physicochemical as well as drug delivery properties of the carriers.

Multi-responsive poly(oligo(ethylene glycol)methyl methacrylate)-co-poly(2-(diisopropylamino)ethyl methacrylate) hyperbranched copolymers via reversible addition fragmentation chain transfer polymerization

Multi-responsive P(OEGMA-co-DIPAEMA) hyperbranched copolymers are synthesized via RAFT polymerization. The copolymers form different aggregates in aqueous media depending on solution pH, temperature and copolymer composition.

Redox-Responsive Nanocarrier for Controlled Release of Drugs in Inflammatory Skin Diseases

A synthetic route for redox-sensitive and non-sensitive core multi-shell (CMS) carriers with sizes below 20 nm and narrow molecular weight distributions was established. Cyclic voltammetric measurements were conducted characterizing the redox potentials of reduction-sensitive CMS while showcasing its reducibility through glutathione and tris(2-carboxyethyl)-phosphine as a proof of concept. Measurements of reduction-initiated release of the model dye Nile red by time-dependent fluorescence spectroscopy showed a pronounced release for the redox-sensitive CMS nanocarrier (up to 90% within 24 h) while the non-sensitive nanocarriers showed no release in PBS. Penetration experiments using ex vivo human skin showed that the redox-sensitive CMS nanocarrier could deliver higher percentages of the loaded macrocyclic dye meso-tetra (m-hydroxyphenyl) porphyrin (mTHPP) to the skin as compared to the non-sensitive CMS nanocarrier. Encapsulation experiments showed that these CMS nanocarriers can encapsulate dyes or drugs with different molecular weights and hydrophobicity. A drug content of 1 to 6 wt% was achieved for the anti-inflammatory drugs dexamethasone and rapamycin as well as fluorescent dyes such as Nile red and porphyrins. These results show that redox-initiated drug release is a promising strategy to improve the topical drug delivery of macrolide drugs.

PAMAM G4.5 dendrimers for targeted delivery of ferulic acid and paclitaxel to overcome P-glycoprotein-mediated multidrug resistance

In this study, we prepared ferulic acid (FA) and paclitaxel (PTX) co-loaded polyamidoamine (PAMAM) dendrimers conjugated with arginyl-glycyl-aspartic acid (RGD) to overcome P-glycoprotein (P-gp)-mediated multidrug resistance (MDR). FA was released in greater extent (80%) from the outer layer of the dendrimers compared with PTX (70%) from the interior of the dendrimers. FA improved intracellular availability of PTX via P-gp modulation in drug-resistant cells. In vitro drug uptake data show higher PTX delivery with RGD-PAMAM-FP than with PAMAM-FP in drug resistant KB CH-R 8-5 cell lines. This indicates that RGD facilitates intracellular PTX accumulation through active targeting in multidrug-resistant KB CH-R 8-5 cells. The terminal deoxynucleotidyl transferase 2'-deoxyuridine 5'-triphosphate nick-end labeling assay data and membrane potential analysis in mitochondria confirm the enhanced anticancer potential of RGD-PAMAM-FP nanoaggregates in drug-resistant cells. We also confirmed by the increased protein levels of proapoptotic factors such as caspase 3, caspase 9, p53, and Bax after treatment with RGD-PAMAM-FP nanoaggregates and also downregulates antiapoptotic factors. Hence, FA-PTX co-loaded, RGD-functionalized PAMAM G4.5 dendrimers may be considered as an effective therapeutic strategy to induce apoptosis in P-gp-overexpressing, multidrug-resistant cells.

Biodegradable dendritic Boltorn™ nanoconstructs: A promising avenue for cancer theranostics

The family of Boltorn™ H40 dendrimers is an imperative subclass of hyperbranched biodegradable polymers (HBPs), which has received mounting attention as a result of its inimitable chemical, physical and biodegradable properties. These properties embrace three-dimensional dendrimeric nanoarchitecture to avert tanglement between polymer branches, adequate spatial cavities for increased encapsulation of guest molecules, good solubility as well as low viscosity to improve processability, and a huge number of surface functional groups for chemical manipulations. Similarly, low toxicity, non-immunogenicity, and natural biodegradation are significant and critical advantages in therapeutic applications as compared to other dendritic polymers. All these characteristics of Boltorn™ H40 are of pronounced importance for planning and developing advanced targeted cargo delivery carriers for cancer therapy. The present review highlights the applications of Boltorn™ H40 HBPs for the transport of chemotherapeutic agents to manage various types of cancers.

Confined Microenvironments from Thermoresponsive Dendronized Polymers

Confined microenvironments in biomacromolecules arising from molecular crowding account for their well-defined biofunctions and bioactivities. To mimick this, synthetic polymers to form confined structures or microenvironments are of key scientific value, which have received significant attention recently. To create synthetic confined microenvironments, molecular crowding effects and topological cooperative effects have been applied successfully, and the key is balance between self-association of structural units and self-repulsion from crowding-induced steric hindrance. In this article, formation of confined microenvironments from stimuli-responsive dendronized polymers carrying densely dendritic oligoethylene glycols (OEGs) moieties in their pendants is presented. These wormlike thick macromolecules exhibit characteristic thermoresponsive properties, which can provide constrained microenvironments to encapsulate effectively guest molecules including dyes, proteins, or nucleic acids to prevent their protonation or biodegradation. This efficient shielding effect can also mediate chemical reactions in aqueous phase, and even enhance chirality transferring efficiency. All of these can be switched off simply through the thermally-induced dehydration and collapse of OEG dendrons due to the amphiphilicity of OEG chains. Furthermore, the switchable encapsulation and release of guests can be greatly enhanced when these dendronized polymers are used as major constituents for fabricating bulk hydrogels or nanogels, which provide a higher-level confinement.

Protein Aggregation Nucleated by Functionalized Dendritic Polyglycerols

Dendritic polyglycerols (dPGs) are emerging as important polymers for the study of biological processes due to their relatively low toxicity and excellent biocompatibility. The highly branched nature and high density of endgroups make the dPGs particularly attractive frameworks for the study of multivalent interactions such as multivalent protein-carbohydrate interactions. Here, we report the synthesis of a series of lactose functionalized dPGs with different hydrodynamic radii. A series of lactose functionalized dPGs bearing different densities of lactose functional groups was also synthesized. These lactose functionalized dPGs were used to study the templated aggregation of galectin-3, a galactoside binding protein that is overexpressed during many processes involved in cancer progression. Dynamic light scattering measurements revealed a direct correlation between the hydrodynamic radii of the lactose functionalized dPGs and the size of the galectin-3/lactose functionalized dPG aggregates formed upon mixing the lactose functionalized dPGs with galectin-3 in solution. These studies exposed the critical role of galectin-3's N-terminal domain in formation of galectin-3 multimers and also enabled comparisons of polymer templated aggregation using nonspecific interactions versus specific protein-carbohydrate binding interactions.

Synthesis of pH-degradable polyglycerol-based nanogels by iEDDA-mediated crosslinking for encapsulation of asparaginase using inverse nanoprecipitation

Biocompatible, environmentally responsive, and scalable nanocarriers are needed for targeted and triggered delivery of therapeutic proteins. Suitable polymers, preparation methods, and crosslinking chemistries must be considered for nanogel formation. Biocompatible dendritic polyglycerol (dPG) is used in the mild, surfactant-free inverse nanoprecipitation method for nanogel preparation. The biocompatible, fast, and bioorthogonal inverse electron demand Diels-Alder (iEDDA) crosslinking chemistry is used. In this work, the synthesis of pH-degradable nanogels, based on tetrazine, norbonene, and bicyclo[6.1.0]nonyne (BCN) functionalized macromonomers, is reported. The macromonomers are non-toxic up to 2.5 mg mL−1 in three different cell lines. Nanogels are obtained in the size range of 47 to 200 nm and can be degraded within 48 h at pH 4.5 (BA-gels), and pH 3 (THP-gels), respectively. Encapsulation of asparaginase (32 kDa) yield encapsulation efficiencies of up to 93% at 5 wt.% feed. Overall, iEDDA-crosslinked pH-degradable dPG-nanogels from inverse nanoprecipitation are promising candidates for biomedical applications.

Metabolomics reveals differential mechanisms of toxicity of hyperbranched poly(ethyleneimine)-derived nanoparticles to the soil-borne fungus Verticillium dahliae Kleb

There is a consensus on the urge for the discovery and assessment of alternative, improved sources of bioactivity that could be developed as plant protection products (PPPs), in order to combat issues that the agrochemical sector is facing. Based on the recent advances in nanotechnology, nanoparticles seem to have a great potential towards the development of the next generation nano-PPPs used as active ingredients (a.i.) per se or as nanocarriers in their formulation. Nonetheless, information on their mode(s)-of-action (MoA) and mechanisms of toxicity is yet largely unknown, representing a bottleneck in their further assessment and development. Therefore, we have undertaken the task to assess the fungitoxicity of hyperbranched poly(ethyleneimine) (HPEI), quaternized hyperbranched poly(ethyleneimine) (QPEI), and guanidinylated hyperbranched poly(ethyleneimine) (GPEI) nanoparticles to the soil-born plant pathogenic fungus Verticillium dahliae Kleb, and dissect their effects on its metabolism applying GC/EI/MS metabolomics. Results revealed that functionalization of HPEI nanoparticles with guanidinium end groups (GPEI) increases their toxicity to V. dahliae, while functionalization with quaternary ammonium end groups (QPEI) decreases it. The treatments with the nanoparticles affected the chemical homeostasis of the fungus, altering substantially its amino acid pool, energy production, and fatty acid content, causing additionally oxidative and osmotic stresses. To the best of our knowledge, this is the first report on the comparative toxicity of HPEI, QPEI, and GPEI to filamentous fungi applying metabolomics. The findings could be exploited in the study of the quantitative structure-activity relationship (QSAR) of HPEI-derived nanoparticles and their further development as nano-PPPs.

Probing the protein corona around charged macromolecules: interpretation of isothermal titration calorimetry by binding models and computer simulations

Isothermal titration calorimetry (ITC) is a widely used tool to experimentally probe the heat signal of the formation of the protein corona around macromolecules or nanoparticles. If an appropriate binding model is applied to the ITC data, the heat of binding and the binding stoichiometry as well as the binding affinity per protein can be quantified and interpreted. However, the binding of the protein to the macromolecule is governed by complex microscopic interactions. In particular, due to the steric and electrostatic protein–protein interactions within the corona as well as cooperative, charge renormalization effects of the total complex, the application of standard (e.g., Langmuir) binding models is questionable and the development of more appropriate binding models is very challenging. Here, we discuss recent developments in the interpretation of the Langmuir model applied to ITC data of protein corona formation, exemplified for the well-defined case of lysozyme coating highly charged dendritic polyglycerol sulfate (dPGS), and demonstrate that meaningful data can be extracted from the fits if properly analyzed. As we show, this is particular useful for the interpretation of ITC data by molecular computer simulations where binding affinities can be calculated but it is often not clear how to consistently compare them with the ITC data. Moreover, we discuss the connection of Langmuir models to continuum binding models (where no discrete binding sites have to be assumed) and their possible extensions toward the inclusion of leading order cooperative electrostatic effects.