Advances in Fluorescent Nanosensors for Detection of Vitamin B12

Vitamin B12 plays a significant role in maintaining human health. Deficiency or excess intake of vitamin B12 may cause some diseases. Therefore, it is significant to fabricate sensors for sensitive assay of vitamin B12. In the past few years, a variety of nanomaterials have been developed for the fluorescence detection of vitamin B12 in tablets, injection, human serum and food. In the review, the assay mechanisms of fluorescent nanomaterials for sensing vitamin B12 were first briefly discussed. And the progress of various nanomaterials for fluorescence detection of vitamin B12 were systematically summarized. Furthermore, the sensing performance of fluorescent nanosensors was compared with fluorescent probes. Lastly, the challenges and perspectives about the topic were presented.

Synthesis of Yellow Fluorescence Carbon Dots for the Applications of Vitamin B12 Detection and Cell Imaging

In this work, bright yellow fluorescent and multifunctional carbon dots (N-CDs) were prepared by hydrothermal method from O-phenylenediamine and 4-aminobenzoic acid. The fluorescence characterization showed that the N-CDs possessed good optical properties (QY = 32%) and excitation dependent multi-color emission. By exciting with 390 nm, the strong selective interaction of VB12 with N-CDs could result in a sharp decrease in the luminescence of N-CDs at 567 nm. An efficient fluorescence sensor in aqueous solution was constructed which could linearly respond VB12 in wide concentration ranges of 0-90 μM and 140-250 μM. The linear correlation coefficients of N-CDs and VB12 were 0.9950 and 0.9968, respectively, and the detection limit was 0.119 μM. N-CDs were performed for sensitive determination of VB12 in real samples. Moreover, the N-CDs were exploited to image cell. This N-CDs was a sensitive fluorescence probe to monitor VB12 and presented prospective potential in living cells imaging. Schematic diagram of the synthesis process and application research of N-CDs.

Carbon Dots-Types, Obtaining and Application in Biotechnology and Food Technology

Materials with a "nano" structure are increasingly used in medicine and biotechnology as drug delivery systems, bioimaging agents or biosensors in the monitoring of toxic substances, heavy metals and environmental variations. Furthermore, in the food industry, they have found applications as detectors of food adulteration, microbial contamination and even in packaging for monitoring product freshness. Carbon dots (CDs) as materials with broad as well as unprecedented possibilities could revolutionize the economy, if only their synthesis was based on low-cost natural sources. So far, a number of studies point to the positive possibilities of obtaining CDs from natural sources. This review describes the types of carbon dots and the most important methods of obtaining them. It also focuses on presenting the potential application of carbon dots in biotechnology and food technology.

Multifaceted Carbon Dots: toward pH-Responsive Delivery of 5-Fluorouracil for In Vitro Antiproliferative Activity

The synthesis of smart hybrid material to assimilate diagnosis and treatment is crucial in nanomedicine. Herein, we present a simple and facile method to synthesize multitalented blue-emissive nitrogen-doped carbon dots N@PEGCDs. The as-prepared carbon dots N@PEGCDs show enhanced biocompatibility, small size, high fluorescence, and high quantum yield. The N@PEGCDs are used as a drug carrier for 5-fluorouracil (5-FU) with more release at acidic pH. Furthermore, the mode of action of drug-loaded CD (5FU-N@PEGCDs) has also been explored by performing wound healing assay, DCFDA assay for ROS generation, and Hoechst staining. The drug loaded with carbon dots showed less toxicity to normal cells compared to cancer cells, making it a perfect candidate to be studied for designing next-generation drug delivery systems.

Plastic Waste-Derived Carbon Dots: Insights of Recycling Valuable Materials Towards Environmental Sustainability

Carbon dots (CDs) or carbon quantum dots (CQDs) have emerged as rising stars in the carbon family due to their diverse applications in various fields. CDs are spherical particles with a well-distributed size of less than 10 nm. Functional CDs are promising nanomaterials with low toxicity, low cost, and enormous applications in the field of bioimaging, optoelectronics, photocatalysis, and sensing. Plastic is non-biodegradable and hazardous to the environment, however extremely durable and used in abundance. During the COVID-19 pandemic, the use of plastic waste, particularly masks, goggles, face shields, and shoe cover, has increased tremendously. It needs to be recycled in a productive way as plastic wastes take hundreds or thousands of years to degrade naturally. The conversion of plastic waste into magnificent CDs has been reported as one of the key alternatives for environmental sustainability and socio-economic benefits. In this review, synthetic routes for the conversion of plastic wastes into CDs utilizing hydrothermal, solvothermal, pyrolysis, flash joule heating, and characterization of these CDs using different techniques, such as Fourier-transform infrared spectroscopy, Raman spectroscopy, X-ray diffraction, and transmission electron microscope, have been discussed. Furthermore, potential applications of these plastic-derived CDs in sensing, catalysis, agronomics, and LED lights are summarized herein.

Green-emitting functionalized silicon nanoparticles as an "off-on" fluorescence bio-probe for the sensitive and selective detection of mercury (II) and 3-mercaptopropionic acid

Herein, we developed a class of functionalized silicon nanoparticles (F-SiNPs) bio-probes named thiol-conjugated F-SiNPs. They combine excellent biocompatibility with small dimensions (<10 nm) and biological usefulness with sustained and robust fluorescence (3.32% photoluminescent quantum yield). Identifying 3-Mercaptopropionic acid (3-MPA), which lowers the quantity of gamma-aminobutyric acid in the brain, and mercury (Hg²⁺) was a crucially important step since their excessive levels are a sign of several disorders. Using F-SiNPs as a fluorescent bio-probe, we provided an "off-on" technique for sensitively and selectively determining Hg²⁺ and 3-MPA in this study. The 3-(2-aminoethylamino) propyl (dimethoxymethylsilane) and basic fuchsin as precursors were hydrothermally treated to produce the F-SiNPs exhibiting green fluorescence. Our results suggest that Hg²⁺ reduced the fluorescence of F-SiNPs because of strong ionic interactions and metal-ligand binding among many thiols and carboxyl groupings at the surface of Hg²⁺ and F-SiNPs. Additionally, the resultants demonstrated that after being quenched by Hg²⁺, the produced F-SiNPs led to the distinctive "off-on" response to 3-MPA. Moreover, the method could detect Hg²⁺ and 3-MPA with limits of detection of 0.065 μM and 0.017 μM, respectively. The technique employed is quick, easy, affordable, and environmentally friendly. The sensing platform has successfully determined Hg²⁺ and 3-MPA in urine, water, and human serum samples.

Selective detection of aspartic acid in human serum by a fluorescent probe based on CuInS2@ZnS quantum dots

The importance of amino acids identification in biological systems has created expectation to develop a sensitive method for their detection. In this work, an efficient core-shell fluorescent quantum dots (QDs) probe based on CuInS₂ (CIS) core and ZnS shell with the formula of CIS@ZnS QDs were synthesised and characterised by FT-IR, UV-Vis, TEM and DLS techniques. The probe was used for detection of Aspartic Acid (Asp) in an aqueous media. The probe shows a remarkable fluorescence response toward Asp over the other amino acids such as valine (Val), glycine (Gly), phenylalanine (Phe), leucine (Leu), alanine (Ala), serine (Ser), isoleucine (Iso), threonine (Thr), methionine (Met), Glutamic acid (Glu), histidine (His), arginine (Arg), cysteine (Cys), asparagine (Asn), glutamine (Gln), citrolline (Cit), sarcosine (Sar) and ornithine (Orn) the fluorescence intensity quenches significantly upon addition of Asp in an aqueous media. The CIS@ZnS QDs probe showed a selective and sensitive response by fluorescence quenching toward Asp in the concentration range of 8.3 × 10^-7 M to 3.3 × 10^-4 M with the detection limit of 7.8 × 10^-8 M. The application of the sensor in determination of Asp in real human serum sample was also investigated. Based on our library search, the all reported fluorescent sensors for detection of Asp, either show a remarkable sensitivity to Glu acid. Luckily, this is the first presented optical probe able to detect just Asp from the solutions containing various amino acids.

Green Carbon Dots: Synthesis, Characterization, Properties and Biomedical Applications

Carbon dots (CDs) are a new category of crystalline, quasi-spherical fluorescence, "zero-dimensional" carbon nanomaterials with a spatial size between 1 nm to 10 nm and have gained widespread attention in recent years. Green CDs are carbon dots synthesised from renewable biomass such as agro-waste, plants or medicinal plants and other organic biomaterials. Plant-mediated synthesis of CDs is a green chemistry approach that connects nanotechnology with the green synthesis of CDs. Notably, CDs made with green technology are economical and far superior to those manufactured with physicochemical methods due to their exclusive benefits, such as being affordable, having high stability, having a simple protocol, and being safer and eco-benign. Green CDs can be synthesized by using ultrasonic strategy, chemical oxidation, carbonization, solvothermal and hydrothermal processes, and microwave irradiation using various plant-based organic resources. CDs made by green technology have diverse applications in biomedical fields such as bioimaging, biosensing and nanomedicine, which are ascribed to their unique properties, including excellent luminescence effect, strong stability and good biocompatibility. This review mainly focuses on green CDs synthesis, characterization techniques, beneficial properties of plant resource-based green CDs and their biomedical applications. This review article also looks at the research gaps and future research directions for the continuous deepening of the exploration of green CDs.

A High Catalytic Activity Nanozyme Based on Cobalt-Doped Carbon Dots for Biosensor and Anticancer Cell Effect

Nanozyme technology as an emerging field has been successfully applied to chemical sensing, biomedicine, and environmental monitoring. It is very significant for the advance of this field to construct nanozymes with high catalytic activity by a simple method and to develop their multifunctional applications. Here, a new type of cobalt-doped carbon dots (Co-CDs) nanozymes was designed using vitamin B₁₂ and citric acid as the precursors. The homogeneous cobalt doping at carbon nuclear led the Co-CDs to show significant peroxidase-like activity resembling natural metalloenzymes. Based on the high affinity of Co-CDs to H₂O₂ (K_m = 0.0598 mM), a colorimetric sensor for glucose detection was constructed by combining Co-CDs with glucose oxidase. On account of the high catalytic activity of nanozymes and the cascade strategy, a good linear relationship was obtained from 0.500 to 200 μM, with a detection limit of 0.145 μM. The biosensor has realized the accurate detection of glucose in human serum samples. Moreover, Co-CDs could specifically catalyze H₂O₂ in cancer cells to generate a variety of reactive oxygen species, leading to the death of cancer cells, which has useful application potential in tumor catalytic therapy. In this work, the catalytic activity of Co-CDs has been adequately exploited, which extends the application of carbon dots in multiple biotechnologies, including biosensing, disease diagnosis, and treatment.

Insight into the Modulation of Carbon-Dot Optical Sensing Attributes through a Reduction Pathway

Oxidized/reduced carbon dots (CDs) with tunable optical features have emerged as a new class of CDs having a common "molecular origin" but different fluorescence (FL) behaviors. In the present work, using "banana peel" as a sole carbon source followed by doping with fluorine (F), boron (B), and nitrogen (N) over CDs, banana peel-derived carbon dots (BP-CDs) were synthesized using a well-known hydrothermal synthesis method. Moreover, as-synthesized BP-CDs were further reduced to "rBP-CDs" by NaBH4. At post reduction, the FL performance (i.e., quantum yield) of rBP-CDs were found to be enhanced compared with the BP-CDs, along with variations in excitation and emission wavelengths. Interestingly, the optical sensing attributes of BP-CDs and rBP-CDs were varied, that is, BP-CDs selectively sense "Co2+ with a limit of detection (LOD) value of 180 nM", whereas rBP-CDs detected Co2+ (with an LOD value of 242 nM) as well as Hg2+ (with an LOD value of 190 nM). To the best of our knowledge, this work presents the very first report on the modulation of CDs' sensing behavior after reduction. The modulation in the sensing behavior with the common carbon precursor and reduction paves a new possibility for exploring CDs for different commercial applications.

Nicotinamide-Functionalized Carbon Quantum Dot as New Sensing Platform for Portable Quantification of Vitamin B12 in Fluorescence, UV-Vis and Smartphone Triple Mode

Development of an efficient, portable and simple nanosensor-based systems with reliable analytical performance for on-site monitoring of vitamin B12 (VB12) are still major problems and a challenging work for quality control of manufacturers. Herein, a new fluorescence, UV-Vis and smartphone triple mode nanosensors were designed for the simultaneous detection of VB12 with high sensitivity and accuracy. A novel nanosensor was synthesized through nicotinamide-functionalizing of carbon quantum dot (NA-CQDs) by an one-step microwave-assisted method with green approach. The NA-CQDs sensor showed excellent fluorescence properties and wide linear ranges from 0.1-60 µM with the detection limits of 31.7 nM. Moreover, color changes of NA-CQDs induced by the VB12 could also be detected by UV-Vis spectrophotometer and inhouse-developed application installed on smartphone as a signal reader, simultanusly. The Red, Green and Blue (RGB) intensities of the colorimetric images of NA-CQDs/VB12 system which taken by smartphone's camera converted into quantitative values by the application. A smartphone-integrated with NA-CQDs as colorimetric sensing platform displays good linear ranges (4.16 to 66.6 μM) for on-site determination of VB12 with detection limit of 1.40 μM. The method was successfully applied in the determination of VB12 in complex pharmaceutical supplement formulations without any sample pre-treatment and matrix interfering effects. The recovery results (96.52% to 105.10%) which were in agreement with the reference methods, demonstrating the capability of the smartphone-assisted colorimetric sensing platform in many on-site practical applications of quality controls.

Facile Fabrication of Highly Fluorescent N-Doped Carbon Quantum Dots Using an Ultrasonic-Assisted Hydrothermal Method: Optical Properties and Cell Imaging

Fluorescent N-doped carbon nanodots (CNDs) are a type of environmentally friendly nanomaterial that is promising for application in cell imaging and optoelectronics. In this paper, a natural amino acid (l-glutamic acid) was used as a precursor, and two different morphological and structured N-doped carbon quantum dots (CQDs) were synthesized via a one-step ultrasonic-assisted hydrothermal method at 230 and 250 °C. Various microscopy and spectroscopy techniques were employed to characterize the morphology, structure, optical properties, and stability of the CQDs. The results showed that N-CQDs-1 are new CNDs composed of amorphous carbon with a large amount of pyroglutamic acid, and N-CQDs-2 are composed of pure amorphous carbon. The CQDs exhibit excellent optical properties, such as 40.5% quantum yield, strong photobleaching resistance, and superior photostability. Combining the fluorescence lifetimes and radiative and non-radiative decay constants, the photoluminescence mechanism of the CQDs was qualitatively explained. The two CQDs were used for BV2 cell imaging and showed good results, implying the ultrasonic-assisted hydrothermal approach as a facile method to obtain structure- and morphology-controllable N-doped CQDs with prospect for application in cell imaging.

Application of nanomaterials decorated with cyclodextrins as sensing elements for environment analysis

Environmental pollution has brought adverse socio-economic consequences. Organic pollutants and heavy metals are the main culprits of environmental pollution. It is of great importance to develop novel, simple, rapid, sensitive, and low-cost detection approaches for sensing trace pollutants in environmental samples. A lot of detection strategies which are based on varieties of nanomaterials have been developed for environmental analysis in past decades. In this review, we retrospect a variety of nanomaterials decorated with cyclodextrins (CDs), including carbon nanomaterials decorated with CDs, noble metal nanomaterials decorated with CDs and other nanomaterials decorated with CDs, and their application in environmental analysis. CDs is a type of ideal modifying molecules which could recognize targets, improve the solubility and dispersibility of corresponding functionalized materials, and enhance the detecting performance of designed sensors. CDs have been widely immobilized to carbon nanomaterials, noble metal nanomaterials, phosphorene (BP) nanocomposites, metal organic framework (MOF), and magnetic nanomaterials, and these nanocomposites have been utilized as the sensing elements for different target analytes. Immobilizing CDs on different nanomaterials could extremely expand the development of new sensing systems for environmental analysis based on these materials, greatly broaden the species of sensing targets, and apparently improve their sensing performance. Herein, the nanomaterials decorated with CDs, as sensing elements for environmental analysis, were reviewed including the types of nanomaterials decorated with CDs and their applications in various sensing strategies for environmental analysis. Finally, the perspectives of the nanomaterials decorated with CDs used as sensing elements were also discussed.

Dual-Emitting Carbonized Polymer Dots Synthesized at Room Temperature for Ratiometric Fluorescence Sensing of Vitamin B12

Ratiometric fluorescence (FL) probes are highly desirable for highly sensitive and reliable assays. Dual-emitting carbonized polymer dots (CPDs) have great application prospects in building ratiometric FL sensors. However, dual-emitting CPDs are usually synthesized at high temperatures and high pressures, which not only increases the cost but also complicates the structure of CPDs. Here, we developed a facile strategy for the fabrication of dual-emitting CPDs at room temperature using tetrachlorobenzoquinone and ethylenediamine. The formation of CPDs was induced by Schiff base condensation reaction, enabling the following cross-linking polymerization process. The dual-emitting CPDs demonstrate good photostability and antioxidant capacity. Importantly, the typical dual-emission bands of the as-prepared CPDs are found to have a blue emission band at 445 nm with a maximum excitation of 350 nm and a yellow emission band at 575 nm with a maximum excitation of 440 nm. Based on the dual-emitting property of CPDs, a ratiometric FL nanoprobe is obtained for sensitive determination of vitamin B12 (VB12), as the inner filtering and static quenching effects between VB12 and CPDs allow effective quenching of the blue FL of CPDs, while the yellow FL is maintained. The established assay shows linear detection ranges of 0.25-100 μM with a low limit of detection of 0.14 μM. These findings provide new guidance for the facile preparation of CPDs with excellent dual-emitting optical properties, indicating good prospects in biosensing.

Advances in the Methods for the Synthesis of Carbon Dots and Their Emerging Applications

Cutting-edge technologies are making inroads into new areas and this remarkable progress has been successfully influenced by the tiny level engineering of carbon dots technology, their synthesis advancement and impressive applications in the field of allied sciences. The advances of science and its conjugation with interdisciplinary fields emerged in carbon dots making, their controlled characterization and applications into faster, cheaper as well as more reliable products in various scientific domains. Thus, a new era in nanotechnology has developed into carbon dots technology. The understanding of the generation process, control on making processes and selected applications of carbon dots such as energy storage, environmental monitoring, catalysis, contaminates detections and complex environmental forensics, drug delivery, drug targeting and other biomedical applications, etc., are among the most promising applications of carbon dots and thus it is a prominent area of research today. In this regard, various types of carbon dot nanomaterials such as oxides, their composites and conjugations, etc., have been garnering significant attention due to their remarkable potential in this prominent area of energy, the environment and technology. Thus, the present paper highlights the role and importance of carbon dots, recent advancements in their synthesis methods, properties and emerging applications.

Structural requirements of flavonoids for the selective inhibition of α-amylase versus α-glucosidase

In the present study, 14 structurally unique flavonoids were screened to systematically investigate structural requirements for selectively inhibiting human α-amylase versus α-glucosidase to obtain a slow but complete starch digestion for health benefit. The selective inhibition property of three flavonoids chosen against the two classes of starch digestive enzymes was confirmed through various analytical techniques - in vitro inhibition assay, fluorescence quenching, kinetic study, and molecular modeling. Considering the chemical structure of flavonoids, the double bond between C2 and C3 and OH groups at A5 and B3 are critical for the inhibition of α-amylase allowing flavonoids to lie parallel on the α-amylase catalytic active site, whereas the OH groups at B3 and C3 are important for α-glucosidase inhibition causing B-ring specific entry into the catalytic active site of α-glucosidase. Our findings provide insights into how to apply flavonoids to effectively control digestion rate for improving physiological responses.

Synthesis and Characterization of a Novel Heterocyclic Schiff Base and Development of a Fluorescent Sensor for Vitamin B12

A heterocyclic Schiff base (MPDPI)was synthesized by the condensation reaction of 1-phenylisatin with 4,5-dimethylphenylene diamine. It was characterized by using spectroscopic methods including UV visible, Infrared, 1H-NMR, 13C-NMR and mass spectrometry. It acts as the fluorescent probe for the detection of Vitamin B12 (Vit.B12) which shows high selectivity over other species via dynamic quenching mechanism. It is also highly sensitive towards Vit.B12 with a detection limit of [Formula: see text]M and showed a linear concentration ranging from [Formula: see text] to [Formula: see text]. Effect of other coexisting species was also studied. The satisfactory results were also obtained in real samples.Since, there are only few reports on Vit.B12, development of selective fluorescent probes for Vit.B12 would be worthwhile.

Multifunctional N-Doped Carbon Dots for Bimodal Detection of Bilirubin and Vitamin B12, Living Cell Imaging, and Fluorescent Ink

A N-doped carbon dot (NCD) has been synthesized via a simplistic one-step hydrothermal technique using l-aspartic acid and 3,6-diaminoacridine hydrochloride. The NCDs exhibit a high quantum yield (22.7%) and excellent optical stability in aqueous media. Additionally, NCDs display good solid-state yellowish-green emission and are suitable for security ink applications. The remarkable fluorescence (FL) properties of NCDs are further applied to develop a multifunctional sensor for bilirubin (BR) and vitamin B₁₂ (VB12) via fluorescence quenching. We have systematically studied the FL quenching mechanisms of the two analytes. The primary quenching mechanism of BR is via the Förster resonant energy transfer (FRET) pathway facilitated by the H-bonding network between the hydrophilic moieties existing at the surface of BR and NCDs. In contrast, the inner filter effect (IFE) is mainly responsible for the recognition of VB12. The practicability of the nanoprobe NCDs is further tested in real-sample analysis for BR (human serum and urine samples) and VB12 (VB12 tablets, human serum, and energy drink) with a satisfactory outcome. The in vitro competency is also verified in the human cervical cancer cell line (HeLa cell) with negligible cytotoxicity and significant biocompatibility. This result facilitates the application of NCDs for bioimaging and recognition of VB12 in a living organism.

Facile synthesis of orange fluorescence multifunctional carbon dots for label-free detection of vitamin B12 and endogenous/exogenous peroxynitrite

In this work, orange emission fluorescent multifunctional carbon dots (O-CDs) were designed for the label-free detection of vitamin B₁₂ (VB₁₂)，endogenous/exogenous peroxynitrite (ONOO^-) sensing, cell imaging, and fluorescent flexible film preparation. The O-CDs with excitation-independent were prepared using safranine T and ethanol as precursors via one-step hydrothermal process. VB₁₂ was utilized as a quencher to quench the fluorescence of O-CDs due to the internal filtration effect (IFE). Two-segment linear ranges are 1-65 μM and 70-140 μM, and the detection limit was calculated as 0.62 μM. Besides, ONOO^- can reduce the fluorescence intensity of O-CDs based on static quenching (SQ). The linear ranges are 0.3-9 μM and 9-48 μM, and the detection limit was 0.06 μM. Moreover, the O-CDs were exploited as a cellular imaging reagent for intracellular VB₁₂ and endogenous/exogenous ONOO^- imaging owing to its great biocompatibility, low toxicity and strong photostability. These results indicate that O-CDs have the potential to be used as a sensitive fluorescence probe to rapidly monitor VB₁₂ and endogenous/exogenous ONOO^- with high selectivity in living cells. Also, the as-proposed O-CDs can be employed to fabricate O-CDs/PVA composites as fluorescent flexible films. All of the above prove that the O-CDs present great prospect in multiple applications such as biosensing, cellular labeling, biomedical optical imaging, and fluorescent films.

Carbon Nanomaterials: Synthesis, Functionalization and Sensing Applications

Recent advances in nanomaterial design and synthesis has resulted in robust sensing systems that display superior analytical performance. The use of nanomaterials within sensors has accelerated new routes and opportunities for the detection of analytes or target molecules. Among others, carbon-based sensors have reported biocompatibility, better sensitivity, better selectivity and lower limits of detection to reveal a wide range of organic and inorganic molecules. Carbon nanomaterials are among the most extensively studied materials because of their unique properties spanning from the high specific surface area, high carrier mobility, high electrical conductivity, flexibility, and optical transparency fostering their use in sensing applications. In this paper, a comprehensive review has been made to cover recent developments in the field of carbon-based nanomaterials for sensing applications. The review describes nanomaterials like fullerenes, carbon onions, carbon quantum dots, nanodiamonds, carbon nanotubes, and graphene. Synthesis of these nanostructures has been discussed along with their functionalization methods. The recent application of all these nanomaterials in sensing applications has been highlighted for the principal applicative field and the future prospects and possibilities have been outlined.

Recent Developments in Carbon Quantum Dots: Properties, Fabrication Techniques, and Bio-Applications

Carbon dots have gained tremendous interest attributable to their unique features. Two approaches are involved in the fabrication of quantum dots (Top-down and Bottom-up). Most of the synthesis methods are usually multistep, required harsh conditions, and costly carbon sources that may have a toxic effect, therefore green synthesis is more preferable. Herein, the current review presents the green synthesis of carbon quantum dots (CQDs) and graphene quantum dots (GQDs) that having a wide range of potential applications in bio-sensing, cellular imaging, and drug delivery. However, some drawbacks and limitations are still unclear. Other biomedical and biotechnological applications are also highlighted.

A one-pot synthesis of fluorescent N,P-codoped carbon dots for vitamin B12 determination and bioimaging application

N,P-codoped carbon dots were synthesised using l-arginine and phosphoric acid and explored for the detection of vitamin B₁₂ (VB₁₂) and bioimaging.

One-pot synthesis of natural amine-modified biocompatible carbon quantum dots with antibacterial activity

In the present study, the thermal decomposition of citric acid in the presence of biogenic amine was used to synthesize four different functionalized carbon quantum dots (CQDs), namely, histamine-(HCQDs), putrescine-(PCQDs), cadaverine-(CCQDs) and spermine-(SCQDs). The thermal decomposition of the precursors resulted in a decrease in stability and the formation of surface amides via a cross-linking process between the carboxyl and amine groups. The deposition of biogenic amines was confirmed by a structural characterization of the synthesized CQDs. The resulting CQDs, with a net zero charge, exhibited excellent stability in environments with different pH values. Through a set of different cytotoxicity tests, the absence of gene mutations, apoptosis, necrosis or disruption in cell membranes revealed the high biocompatibility of the CQDs. The antimicrobial activity of the synthesized CQDs was investigated against different bacterial species (Staphylococcus aureus, Escherichia coli, and Klebsiella pneumonia). We determined the growth kinetics, production of reactive oxygen species (ROS), cell viability and changes in membrane integrity by scanning electron microscopy (SEM). The minimal inhibitory concentrations (MICs) for S. aureus ranged from 3.4 to 6.9 µg/mL. Regarding E.coli and K. pneumonia, all CQD formulations reduced growth, and the MICs were determined for CCQDs and HCQDs (6.9-19.4 µg/mL). The antibacterial activity mechanism was attributed to the oxidative stress generated after CQD treatment, which resulted in the destabilization of the bacterial membrane. The bacterial permeability to propidium iodide indicated a change in membrane integrity, and the effect of CQDs on the morphology of the bacterial cells was evidenced by SEM.

Sensor and Bioimaging Studies Based on Carbon Quantum Dots: The Green Chemistry Approach

Since carbon quantum dots have high photoluminescent efficiency, it has been a desired material in sensor and bioimaging applications. In recent years, the green chemistry approach has been preferred and the production of quantum dots has been reported in many studies using different precursors from natural, abundant, or waste sources. Hydrothermal, chemical oxidation, microwave supported, ultrasonic, solvothermal, pyrolysis, laser etching, solid-state, plasma, and electrochemical methods have been reported in the literature. In this review article, green chemistry strategies for carbon quantum dot synthesis is summarized and compared with conventional methods using methodologic and statistical data. Furthermore, a detailed discussion on sensor and bioimaging applications of carbon quantum dots produced with green synthesis approaches are presented with a special focus on the last decade.

The quantum dot-FRET-based detection of vitamin B12 at a picomolar level

Herein we report the picomolar level detection of vitamin B12 (VB12) using orange-red emitting ligand-free Mn²⁺-doped ZnS quantum dots (QDs; λ _em = 587 nm) in an aqueous dispersion. Sensing was achieved following the quenching of the luminescence of the Mn²⁺-doped ZnS QDs with an increasing concentration of VB12. The Stern-Volmer constant was determined to be 5.2 × 10¹⁰ M^-1. Importantly, the Mn²⁺-doped ZnS QDs exhibited high sensitivity towards VB12, with a limit of detection as low as 1.15 ± 0.06 pM (in the linear range of 4.9-29.4 pM) and high selectivity in the presence of interfering amino acids, metal ions, and proteins. Notably, a Förster resonance energy transfer (FRET) mechanism was primarily proposed for the observed quenching of luminescence of Mn²⁺-doped ZnS QDs upon the addition of VB12. The Förster distance (R _o) and energy transfer efficiency (E) were calculated to be 2.33 nm and 79.3%, respectively. Moreover, the presented QD-FRET-based detection may bring about new avenues for future biosensing applications.

FRET probe for selective and sensitive detection of vitamin A by cadmium free quantum dots (ZnS)

Vitamin A as a powerful antioxidant plays an important role in human body functions including bone remodeling regulation, healthy immune system and cell growth reproduction. An accurate determination of vitamin A is taken into consideration because of its importance for human health. In this paper, we reported a fluorescence resonance energy transfer (FRET) probe, MPS-capped ZnS QDs, for sensitive and selective detection of vitamin A. The colloidal MPS-capped ZnS QDs were prepared from Zinc acetate and sodium sulfide by employing 3-mercaptopropyltrimethoxysilane (MPS) molecules as the stabilizer or capping agent at the pH condition of 10. The synthesized MPS-capped ZnS QDs were characterized by means of FT-IR, UV-Vis, DLS, and TEM techniques. The sensing behavior of MPS-capped ZnS QDs for selective and sensitive detection of vitamin A, vitamin B₂, vitamin B₆, vitamin E, vitamin K, vitamin H, vitamin D₃ and vitamin C was investigated using fluorescence spectroscopy. The detection mechanism involves photoinduced charge transfer from the surface of ZnS QDs to Vitamin resulting in the fluorescence quenching of ZnS QDs followed by nonradiative fluorescence resonance energy transfer. An excellent selectivity was observed for vitamin A versus other tested species. A linear relationship was observed between the fluorescence intensity of MPS-capped ZnS QDs and the concentration of vitamin A in the range of 3.33-36.66 μM with detection limit of 1.062 μM.

Facile synthesis of red dual-emissive carbon dots for ratiometric fluorescence sensing and cellular imaging

Recently, widespread attention has been paid to red emissive carbon dots (CDs) which have desirable optical properties, low toxicity, and biocompatibility. Despite great efforts, the facile preparation of red dual-emissive CDs useful for ratiometric detection and bioimaging remains challenging. Here, we report a facile synthesis of red dual-emissive CDs and their potential for ratiometric fluorescence sensing and cellular imaging. Derived from the hydrothermal treatment of dicyandiamide and o-phenylenediamine in dilute sulfuric acid, the CDs are surface-tailored with nitrogen-, oxygen-, and sulfur-containing functional groups. The as-prepared CDs show various good features, including good water solubility, biocompatibility, excitation-independent dual-emission with two photoluminescence (PL) peaks centered at 630 and 680 nm, and an absolute quantum yield (QY) of 30.2% in water. The CDs exhibit a selective, sensitive, rapid, and stable ratiometric fluorescence response toward methyl blue, giving a linear relationship in the range of 0.5-300 μM with a correlation coefficient (R2) of 0.997. We also study ratiometric fluorescence sensing for the accurate detection of pH. Moreover, the CDs possess good cellular imaging ability, indicating their promising applicability for biomedical applications. These results pave a way toward the fabrication of red dual-emissive carbon-based nanomaterials useful for both ratiometric sensing and bioimaging.

Enhanced sensitivity and detection range of FRET-based vitamin B12 nanosensor

Vitamin B₁₂ (cobalamin) is a cobalt-containing compound that acts as an essential co-factor for various enzymes involved in the metabolic processes of the living cells. The constructed FRET Sensor for Vitamin Anemia Linked (SenVitAL) displayed marginal FRET efficiency. Here, we report the development of a molecular SenVitAL containing enhanced cyan fluorescent protein (ECFP) and venus as FRET pair to improve the FRET efficiency for optical imaging and screening of already developed sensor by our group. The sensor is the improved version of previously reported SenVitAL and consists of ECFP/venus as FRET pair instead of the originally used pair CFP/YFP. To increase the physiological range of vitamin B₁₂ measurement, affinity mutants were created. Compared to the wild type, SenVitAL-5 with W44Q mutation has higher affinity and displayed large dynamic detection range (0.10-480 µM) in response to vitamin B₁₂ binding. For cell-based monitoring and dynamic measurement of vitamin B₁₂ flux rates_, SenVitAL-5 was successfully expressed in cytosol of yeast and mammalian cells. Changes in the emission intensities of the two fluorophores were detected using confocal microscopy in both cell types in response to vitamin B₁₂. With the addition of 50 µM extracellular vitamin B₁₂ to the cells, the emission intensity of venus increased and that of ECFP decreased over the time. Furthermore, the results show that the variant SenVitAL-5 measures the vitamin B₁₂ in a concentration-dependent manner, showing the resulting increase in the FRET ratio and thus confirming its utility as an ideal fluorescent indicator for the detection of vitamin B₁₂ in eukaryotic systems in real time.

Green synthesis, biomedical and biotechnological applications of carbon and graphene quantum dots. A review

Carbon and graphene quantum dots are prepared using top-down and bottom-up methods. Sustainable synthesis of quantum dots has several advantages such as the use of low-cost and non-toxic raw materials, simple operations, expeditious reactions, renewable resources and straightforward post-processing steps. These nanomaterials are promising for clinical and biomedical sciences, especially in bioimaging, diagnosis, bioanalytical assays and biosensors. Here we review green methods for the fabrication of quantum dots, and biomedical and biotechnological applications.

Carbon dots derived from lychee waste: Application for Fe3+ ions sensing in real water and multicolor cell imaging of skin melanoma cells

Exploit of biomass as an inexhaustible resource has accepted much more curiosity to the present research world. Herein, a simple, one-step solvothermal action has been used to synthesize an ascendable amount of fluorescent carbon dots (CDs) with an average size of~3.13 nm, from Low-reasonable and green source lychee waste. The excitation/emission maxima of CDs have 365/443 nm with high quantum yield (23.5%). The present ingredient predominantly contained carboxylic acid and hydroxyl group that acted as a passive agent for stabilizing the CDs. The structural and optical properties were evaluated through HRTEM, FTIR, UV-vis, zeta potential, XPS, fluorescence, and fluorescence lifetime experiments. We investigated the manoeuvre of our synthesized CDs as a probe for detection of Fe³⁺ ions in water bodies; This sensing approach showed impressive selectivity and sensitivity towards Fe³⁺ions with LOD 23.6 nM. The sensing mechanism took place through static quenching which was entrenched through fluorescence lifetime measurements. Fe³⁺ ions detection was basically carried out with efficacy in real water. For its lofty Photo-stability, low cytotoxicity and cell viability the probe were substantially applied for bio-imaging experiment i.e. intracellular multi-color cell imaging in skin melanoma cells (A375 cells) with and without Fe³⁺ ions exemplifying its real applications in living cells.

Thermal-Recoverable Tough Hydrogels Enhanced by Porphyrin Decorated Graphene Oxide

Artificial tissue materials usually suffer properties and structure loss over time. As a usual strategy, a new substitution is required to replace the worn one to maintain the functions. Although several approaches have been developed to restore the mechanical properties of hydrogels, they require direct heating or touching, which cannot be processed within the body. In this manuscript, a photothermal method was developed to restore the mechanical properties of the tough hydrogels by using near infrared (NIR) laser irradiation. By adding the porphyrin decorated graphene oxide (PGO) as the nanoreinforcer and photothermal agent into carrageenan/polyacrylamide double network hydrogels (PDN), the compressive strength of the PDN was greatly improved by 104%. Under a short time of NIR laser irradiation, the PGO effectively converts light energy to thermal energy to heat the PDN hydrogels. The damaged carrageenan network was rebuilt, and a 90% compressive strength recovery was achieved. The PGO not only significantly improves the mechanical performance of PDN, but also restores the compressive property of PDN via a photothermal method. These tough hydrogels with superior photothermal recovery may work as promising substitutes for load-bearing tissues.

Small molecules derived carbon dots: synthesis and applications in sensing, catalysis, imaging, and biomedicine

Carbon dots (CDs) are the new fellow of carbon family having a size less than 10 nm and attracted much attention of researchers since the last decade because of their unique characteristics, such as inexpensive and facile synthesis methods, easy surface modification, excellent photoluminescence, outstanding water solubility, and low toxicity. Due to these unique characteristics, CDs have been extensively applied in different kind of scientific disciplines. For example in the photocatalytic reactions, drug-gene delivery system, in vitro and in vivo bioimaging, chemical and biological sensing as well as photodynamic and photothermal therapies. Mainly two types of methods are available in the literature to synthesize CDs: the top-down approach, which refers to breaking down a more massive carbon structure into nanoscale particles; the bottom-up approach, which refers to the synthesis of CDs from smaller carbon units (small organic molecules). Many review articles are available in the literature regarding the synthesis and applications of CDs. However, there is no such review article describing the synthesis and complete application of CDs derived from small organic molecules together. In this review, we have summarized the progress of research on CDs regarding its synthesis from small organic molecules (bottom-up approach) via hydrothermal/solvothermal treatment, microwave irradiation, ultrasonic treatment, and thermal decomposition techniques as well as applications in the field of bioimaging, drug/gene delivery system, fluorescence-based sensing, photocatalytic reactions, photo-dynamic therapy (PDT) and photo-thermal (PTT) therapy based on the available literature. Finally, the challenges and future direction of CDs are discussed.

Carbon quantum dots doped with phosphorus and nitrogen are a viable fluorescent nanoprobe for determination and cellular imaging of vitamin B12 and cobalt(II)

Phosphorus and nitrogen dually-doped carbon quantum dots (PN-CQDs) were prepared from sucrose, 85% phosphoric acid and 1,2-ethylenediamine as the sources for carbon, phosphorus and nitrogen, respectively. The PN-CQDs possess good water solubility and favorable biocompatibility. The excitation/emission peaks are at 365/451 nm, but bright blue, green, or red emissions are found depending on whether the excitation wavelengths of the laser are set to 408 nm, 488 nm, or 543 nm, respectively. Fluorescence is quenched by both vitamin B₁₂ (VB₁₂) and Co(II) by a combination of inner filter effect and static quenching. The PN-CQDs are shown to be useful nanoprobes for determination of VB₁₂ and Co(II). Response to VB₁₂ is linear in the range of 2.0-31 μM. The response to Co(II) is linear in two ranges, viz. from 1.7-12 μM and from 28 to 141 μM. The limit of detection of VB₁₂ and Co(II) are 3.0 nM and 29.4 nM, respectively. The nanoprobe was successfully applied to the analyses of VB₁₂ in drug samples and of Co(II) in spiked water samples, and it gave satisfactory results. The nanoprobe was also applied to the determination of VB₁₂ and Co(II) in human hepatocarcinoma cells (type SMMC7721), human pulmonary epithelial cells (type BEAS-2B), human adenocarcinoma cells (type A549), and human pheochromocytoma cells (type PC12), respectively. Graphical abstract Schematic presentation of the quenching of the fluorescence of phosphorus and nitrogen dually-doped carbon quantum dots (PN-CQDs) by vitamin B₁₂ (VB₁₂) and Co(II).

Organic Nanotheranostics for Photoacoustic Imaging-Guided Phototherapy

Phototherapies including photothermal therapy (PTT) and photodynamic therapy (PDT) have emerged as one of the avant-garde strategies for cancer treatment. Photoacoustic (PA) imaging is a new hybrid imaging modality that shows great promise for real-time in vivo monitoring of biological processes with deep tissue penetration and high spatial resolution. To enhance therapeutic efficacy, reduce side effects and minimize the probability of over-medication, it is necessary to use imaging and diagnostic methods to identify the ideal therapeutic window and track the therapeutic outcome. With this regard, nanotheranostics with the ability to conduct PA imaging and PTT/PDT are emerging. This review summarizes the recent progress of organic nanomaterials including nearinfrared (NIR) dyes and semiconducting polymer nanoparticles (SPNs) in PA imaging guided cancer phototherapy, and also addresses their present challenges and potential in clinical applications.

Silicon nanoparticles synthesized using a microwave method and used as a label-free fluorescent probe for detection of VB12

A simple and rapid detection strategy for vitamin B₁₂ (VB₁₂ ) was established based on label-free silicon quantum dots (SiQDs); the detection mechanism was additionally investigated. SiQDs were synthesized using a one-step microwave method, and their fluorescence was stronger than that synthesized using the hydrothermal method. SiQDs fluorescence was quenched using VB₁₂ due to the inner filter effect (IFE), which was demonstrated using ultraviolet (UV) absorption spectra, fluorescence lifetime, transmission electron microscopy and zeta potential analysis. Subsequently, quercetin (Que) and doxorubicin (Dox) with absorption peaks that overlapped the excitation or emission peaks of SiQDs respectively were used as control groups to investigate the quenching mechanism. Results showed that quenching efficiency was related to the level of overlap between the adsorption peak of the quencher and the excitation or emission peaks of SiQDs. A greater level of overlap caused a higher quenching efficiency. Therefore, the sensitive quenching of VB₁₂ for SiQDs was due to the synergistic effect of the synchronous overlap between the absorption peak of VB₁₂ with the excitation and emission peaks of SiQDs. Fluorescence quenching efficiency increased linearly in the 0.5 to 16.0 μmol·L^-1 VB₁₂ concentration range, and the detection limit was 158 nmol·L^-1 . In addition, SiQDs were applied to determine VB₁₂ in tablets and human urine samples with satisfactory recoveries ranging from 97.7 to 101.1%.

On-off-on fluorescent carbon dots from waste tea: Their properties, antioxidant and selective detection of CrO42-, Fe3+, ascorbic acid and L-cysteine in real samples

In this work, we reported an economical plant-based hydrothermal method for one-pot green synthesis of water-soluble carbon dots (Tea-CDs) by using waste tea extract as a carbon source. The synthesized Tea-CDs were characterized by UV-visible, fluorescence, FT-IR, TEM, XPS and XRD. The Tea-CDs were found to remove hydroxyl and superoxide anion radical in vitro. In addition, the Tea-CDs exhibited bright blue fluorescence under UV-light (λ_ex = 365 nm), and the fluorescence could be effectively quenched by CrO₄^2- and Fe³⁺ ions. Meanwhile, the fluorescence of Tea-CDs-CrO₄^2- and Tea-CDs-Fe³⁺ systems could be again easily recovered by ascorbic acid (AA) and L-cysteine (L-Cys). As an on-off-on fluorescent nano-sensor of the Tea-CDs, the sensitive detection of CrO₄^2-, Fe³⁺, AA and L-Cys were all performed, showing that the good linear relationships between fluorescence intensity of Tea-CDs and concentration of all testing samples. Finally, the sensors successfully detected CrO₄^2-, Fe³⁺, AA and L-Cys in commercially available real samples with satisfactory recovery ranges. The prepared sensors offer distinct advantages including low cost, simple handling, good sensitivity and high selectivity.

A multifunctional sensor for selective and sensitive detection of vitamin B12 and tartrazine by Förster resonance energy transfer

We used thiamine nitrate (TN) as single material to fabricate nitrogen and sulfur co-doped carbon quantum dots (N,S-CQDs) with a quantum yield of 10.4% through one-pot hydrothermal method, and its properties were characterized by TEM, XPS, FTIR, fluorescence (FL) and UV-vis spectrophotometer, respectively. The fluorescence of N,S-CQDs was effectively quenched in the presence of vitamin B12 (VB12)/tartrazine due to Förster resonance energy transfer (FRET). Moreover, the rate (K_T) and efficiency (E%) of energy transfer from N,S-CQDs (as a donor) to VB12/tartrazine (as an acceptor) enhanced with increasing the concentrations of acceptor, and the K_T and E% were also varied with the change of excitation wavelengths (from 338 to 408 nm). Based on this principle, a multifunctional fluorescence probe was designed for selective and sensitive detection of VB12/tartrazine with a detection limit (3σ/slope) of 15.6/18.0 nmol/L. Meanwhile, the proposed method was successfully employed to detect VB12/tartrazine in milk and several beverages with a recovery range of 97.5-104.2%/91.0-110.6%.

Optical Sensors Based on II-VI Quantum Dots

Fundamentals of quantum dots (QDs) sensing phenomena show the predominance of these fluorophores over standard organic dyes, mainly because of their unique optical properties such as sharp and tunable emission spectra, high emission quantum yield and broad absorption. Moreover, they also indicate no photo bleaching and can be also grown as no blinking emitters. Due to these properties, QDs may be used e.g., for multiplex testing of the analyte by simultaneously detecting multiple or very weak signals. Physico-chemical mechanisms used for analyte detection, like analyte stimulated QDs aggregation, nonradiative Förster resonance energy transfer (FRET) exhibit a number of QDs, which can be applied in sensors. Quantum dots-based sensors find use in the detection of ions, organic compounds (e.g., proteins, sugars, volatile substances) as well as bacteria and viruses.

Cannabis sativa-derived carbon dots co-doped with N–S: highly efficient nanosensors for temperature and vitamin B12

Cannabis sativa-derived carbon dots as efficient nanosensors for temperature and vitamin B₁₂.

Recent progress in the development of near-infrared organic photothermal and photodynamic nanotherapeutics

Phototherapies including photothermal therapy (PTT) and photodynamic therapy (PDT) have gained considerable attention due to their high tumor ablation efficiency, excellent spatial resolution and minimal side effects on normal tissue. In contrast to inorganic nanoparticles, near-infrared (NIR) absorbing organic nanoparticles bypass the issue of metal-ion induced toxicity and thus are generally considered to be more biocompatible. Moreover, with the guidance of different kinds of imaging methods, the efficacy of cancer phototherapy based on organic nanoparticles has shown to be optimizable. In this review, we summarize the synthesis and application of NIR-absorbing organic nanoparticles as phototherapeutic nanoagents for cancer phototherapy. The chemistry, optical properties and therapeutic efficacies of organic nanoparticles are firstly described. Their phototherapy applications are then surveyed in terms of therapeutic modalities, which include PTT, PDT and PTT/PDT combined therapy. Finally, the present challenges and potential of imaging guided PTT/PDT are discussed.