Graphitic carbon nitride based nanocomposites: a review

Graphitic Carbon Nitride Structures on Carbon Cloth Containing Ultra- and Nano-Dispersed NiO for Photoactivated Oxygen Evolution

The development of low-cost and high-efficiency oxygen evolution reaction (OER) photoelectrocatalysts is a key requirement for H2 generation via solar-assisted water splitting. In this study, we report on an amenable fabrication route to carbon cloth-supported graphitic carbon nitride (gCN) nanoarchitectures, featuring a modular dispersion of NiO as co-catalyst. The synergistic interaction between gCN and NiO, along with the tailoring of their size and spatial distribution, yield very attractive OER performances and durability in freshwater splitting, of great significance for practical end-uses. The potential of gCN electrocatalysts containing ultra-dispersed, i. e. "quasi-atomic" NiO, exhibiting a higher activity than the ones containing nickel oxide nanoaggregates, is further highlighted by their activity even in real seawater. This work suggests that efficient OER catalysts can be designed through the construction of optimized interfaces between transition metal oxides and carbon nitride, yielding inexpensive and promising noble metal-free systems for real-world applications.

Interfacial Engineering over Pt-Calcium Ferrite/2D Carbon Nitride Nanosheet p-n Heterojunctions for Superior Photocatalytic Properties

The present study discloses the fabrication of efficient p-n heterojunctions using n-type polymeric bulk carbon nitride (b-CN, E g = 2.7 eV) or exfoliated nanosheets of carbon nitride (NSCN, E g = 2.9 eV) with p-type spinel ferrite CaFe2O4 (CFO, E g = 1.9 eV) for photocatalytic hydrogen generation. A series of p-n combinations were fabricated and characterized by various techniques. The oxide-carbon nitride interactions, light absorption, band alignment at the interface, and water/H3O+ adsorption capability were elucidated over heterojunctions and correlated with the photocatalytic hydrogen yield. The main developments in the present study are as follows: (1) All heterojunctions were more active than pure phases. (2) The photocatalytic activity trend validated an increase in the lifetime of charge carriers from TRPL. Pt(1 wt %)-CFO(1 wt %)/NSCN (481.5 μmol/h/g under ultraviolet (UV)-visible-simulated light, 147.5 μmol/h/g under CFL illumination for 20 h, τavg = 10.33 ns) > Pt-NSCN > Pt-CFO/b-CN > CFO/NSCN > CFO/b-CN > NSCN > Pt/b-CN > mechanical mixture (MM) of 1 wt %CFO + NSCN-MM > 1 wt %CFO + b-CN-MM > CFO > b-CN (τavg = 4.5 ns). (3) Pt-CFO/NSCN was most active and exhibited 250 times enhanced photocatalytic activity as compared to parent bulk carbon nitride, 6.5 times more active than CFO/NSCN, and twice more active than Pt-NSCN. Thus, enhanced activity is attributed to the smooth channelizing of electrons across p-n junctions. (4) NSCN evidently offered improved characteristics as a support and photocatalyst over b-CN. The exfoliated NSCN occupied a superior few-layer morphology with 0.35 nm width as compared to parent b-CN. NSCN allowed 57% dispersion of 6 nm-sized CFO, while b-CN supported 14% dispersion of 7.8 nm-sized CFO particles, as revealed by small-angle X-ray scattering spectroscopy (SAXS). Sizes of 2-4 nm were observed for Pt nanoparticles in the 1 wt %Pt/1 wt % CFO/NSCN sample. A binding energy shift and an increase in the FWHM of X-ray photoelectron spectroscopy (XPS) core level peaks established charge transfer and enhanced band bending on p-n contact in Pt-CFO/NSCN. FsTAS revealed the decay of photogenerated electrons via trapping in shallow traps (τ1, τ2) and deep traps (τ3). Lifetimes τ1 (3.19 ps, 42%) and τ2 (187 ps, 31%) were higher in NSCN than those in b-CN (τ1 = 2.2 ps, 42%, τ2 = 30 ps, 31%), which verified that the recombination reaction rate was suppressed by 6 times in NSCN (k 2 = 0.53 × 1010 s-1) as compared to b-CN (k 2 = 3.33 × 1010 s-1). Deep traps lie below the H+/H2 reduction potential; thus, electrons in deep traps are not available for photocatalytic H2 generation. (5) The role of CFO in enhancing water adsorption capability was modeled by molecular dynamics. NSCN or b-CN both showed very poor interaction with water molecules; however, the CFO cluster adsorbed H3O+ ions very strongly through the electrostatic interaction between calcium and oxygen (of H3O+). Pt also showed a strong affinity for H2O but not for H3O+. Thus, both CFO and Pt facilitated NSCN to access water molecules, and CFO further sustained the adsorption of H3O+ molecules, crucial for the photocatalytic reduction of water molecules. (6) Band potentials of CFO and NSCN aligned suitably at the interface of CFO/NSCN, resulting in a type-II band structure. Valence band offset (VBO, ΔE VB) and conduction band offset (CBO, ΔE CB) were calculated at the interface, resulting in an effective band gap of 1.41 eV (2.9 - ΔE VB = 1.9 - ΔE CB), much lower than parent compounds. The interfacial band structure was efficient in driving photogenerated electrons from the CB of CFO to the CB of NSCN and holes from the VB of NSCN to the VB of CFO, thus successfully separating charge carriers, as supported by the increased lifetime of charge carriers and favorable photocatalytic H2 yield.

Novel Graphitic Oxynitrides as Photocatalysts for Sustainable H2 Production and CO2 Valorization. The Importance of Self-Assembly for Catalytic Activity

The field of carbocatalysis, often portrayed by paradigmatic graphitic carbonaceous structures, has become a booming topic tailored for multiple applications. To this end, a new metal-free carbocatalyst has been constructed from simple prebiotic monomers such as cyanamide and glyoxal. The resulting material shows an excellent performance as photocatalyst for H2 production and CO2 valorization, thus unveiling its real value to tackle sustainable goals. The unique oxygen-rich carbonaceous structure has been characterized in detail, which is consistent with a graphitic layered network. The described performance in two major societal concerns along with a facile preparation from C1/C2 platforms, makes this type of overlooked oxynitride carbocatalysts promising for real-life environmental endeavors.

Dissolution of g-C3N4 Using Zinc Chloride Molten Salt Hydrates for Nanobelt Fabrication and Photocatalytic H2O2 Production

Graphitic-carbon nitride (g-C3N4), a metal-free two-dimensional layered semiconductor material, holds great potential for energy conversion, environmental remediation, and sensing. However, the limited solubility of g-C3N4 in conventional solvents hinders its widespread application. Improving the dissolution of g-C3N4 in the liquid phase is highly desired but challenging. Herein, we report an innovative approach to dissolve g-C3N4 using ZnCl2 molten salt hydrates. The solubility of g-C3N4 in the solution reaches up to 200 mg mL-1. Density functional theory (DFT) results suggest that ZnCl+H2O is the key species that leads to charge redistribution on g-C3N4 surface and promotes the dissolution of carbon nitride in the solution. Furthermore, through dilution, the dissolved carbon nitride can be effectively recovered while maintaining its intrinsic chemical structure. The resultant regenerated C3N4 (r-C3N4) exhibits nanobelt morphology and demonstrates a substantially improved photocatalytic activity in H2O2 production. The rate of H2O2 production over the r-C3N4 reaches 20,228 μmol g-1 h-1, which is 6.2 times higher than that of pristine g-C3N4. This green and efficient dissolution route of g-C3N4 offers an effective approach for its diverse applications.

Facile construction of efficient WO3/V2O5 coupled g-C3N4 ternary composite photocatalyst for environmental emergent aqueous pollutant degradation: Stability, degradation reaction pathway and effect of pH evaluation

Currently, one of the primary challenges that human society must overcome is the task of decreasing the amount of energy used and the adverse effects that it has on the environment. The daily increase in liquid waste (comprising organic pollutants) is a direct result of the creation and expansion of new companies, causing significant environmental disruption. Water contamination is attributed to several industries such as textile, chemical, poultry, dairy, and pharmaceutical. In this study, we present the successful degradation of methylene blue dye using g-C3N4 (GCN) mixed with WO3 and V2O5 composites (GCN/WO3/V2O5 ternary composite) as a photocatalyst, prepared by a simple mechanochemistry method. The GCN/WO3/V2O5 ternary composite revealed a notable enhancement in photocatalytic performance, achieving around 97% degradation of aqueous methylene blue (MB). This performance surpasses that of the individual photocatalysts, namely pure GCN, GCN/WO3, and GCN/V2O5 composites. Furthermore, the GCN/WO3/V2O5 ternary composite exhibited exceptional stability even after undergoing five consecutive cycles. The exceptional photocatalytic activity of the GCN/WO3/V2O5 ternary composite can be ascribed to the synergistic effect of metal-free GCN and metal oxides, resulting in the alteration of the band gap and suppression of charge recombination in the ternary photocatalyst. This study offers a better platform for understanding the characteristics of materials and their photocatalytic performance under visible light conditions.

Wide-direct-band-gap monolayer carbon nitride CN2: a potential metal-free photocatalyst for overall water splitting

Two dimensional metal-free semiconductors with high work function have attracted extensive research interest in the field of photocatalytic water splitting. Herein, we have proposed a kind of highly stable monolayer carbon nitride CN2 with an anisotropic structure based on first principles density functional theory. The calculations of electronic structure properties, performed using the HSE06 functional, indicate that monolayer CN2 has a wide direct band gap of 2.836 eV and a high work function of 6.54 eV. And the suitable band edge alignment, high electron mobility (∼103 cm2 V-1 s-1) and visible-light optical absorption suggest that monolayer CN2 has potential on visible-light photocatalytic water splitting at pH ranging from 0 to 14. Moreover, we have observed that uniaxial strain can effectively control the electronic structure properties and optical absorption of monolayer CN2, which can further improve its solar to hydrogen efficiency from 9.6% to 16.02% under 5% uniaxial tension strain along the Y direction. Our calculations have not only proposed a new type of potential metal-free photocatalyst for water splitting but also provided a functional part with high work function for type-I and scheme-Z heterojunction applied in photocatalytic water splitting.

Fabrication of SrTiO3 anchored rGO/g-C3N4 photocatalyst for the removal of mixed dye from wastewater: dual photocatalytic mechanism

A metal-free combination of rGO/g-C3N4-coupled SrTiO3 (SRN) ternary nanocomposite prepared via a wet impregnation method for UV-Vis light photocatalytic applications. Various physicochemical properties of the samples were investigated by several spectroscopic techniques including X-ray diffraction (XRD), FT-IR, Raman, field emission scanning electron microscopy with energy dispersive X-ray spectroscopy (FE-SEM-EDX), high-resolution transmission electron microscopy (HR-TEM), UV-Vis, photoluminescence (PL), X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET) surface area analysis. The data suggest agglomerated SRT nanoparticles are dispersed and distributed throughout the surface of the rGO sheets and GCN nanostructures. The photocatalytic performance of the SRN towards combined mixed dye and its degradation activities were evaluated towards the most common industrial effluents, Rhodamine B (RhB) and Methylene blue (MB), under UV-Vis light illumination. The results revealed that the degradation efficiency of the SRN photocatalyst shows excellent performance compared with that of the binary composition and the pure SrTiO3 (SRT) sample. The reaction rate constant for RhB was estimated to be 0.0039 min-1 and for MB to be 0.0316 min-1, which are 3.26 (RhB) and 4.21 (MB) times faster than the pure SRT sample. The enhanced degradation efficiency was attained not only by interfacial formation but also by the speedy transportation of electrons across the heterojunction. After 5 runs of the photocatalytic recylic process, the SRN photocatalyst exhibited ultimate stability without structural changes, and no noticeable degradation was observed. The outcomes of the ternary SRN nanocomposite manifest a dual photocatalytic scheme, the photocatalytic enrichment could be caused by the Z-scheme charge transfer process between GCN, SRT, and rGO nanocomposite, which helps effectual charge separation and keeps a high redox potential. From the results, SRN sample provides insight into the integration of an effective and potential photocatalyst for wastewater treatment toward real-time environmental remediation applications.

Ru/GCN Nanocomposite as an Efficient Catalyst for Hydrogen Generation from Sodium Hypophosphite

Sodium hypophosphite is a promising green source for generating clean elemental hydrogen without pollutants. This study presents the development of an efficient heterogeneous catalyst, Ru/g-C3N4 (Ru/GCN), for hydrogen generation from sodium hypophosphite. The Ru/GCN catalyst demonstrates excellent activity under mild reaction conditions and maintains its effectiveness over multiple cycles without significant loss of activity. This easily separable and recyclable heterogeneous catalyst is straightforward to operate, non-toxic, eco-friendly, and provides a cost-effective alternative to the extensive use of expensive noble metals, which have limited industrial applications. The Ru/GCN catalyst was characterized using various material characterization and spectral methods, including powder X-ray diffraction (PXRD), Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), transmission electron microscopy (TEM), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS), and X-ray photoelectron spectroscopy (XPS). Hypophosphite, combined with the catalytically active and recyclable Ru/GCN catalyst, forms a system with high potential for industrial-scale hydrogen production, suggesting promising avenues for further research and application.

Rationally construction of 2D & 3D material on h-BN @ SnO2/TiO2 micro-sphere enables for photocatalytic debasement of textile cloth dyes in waste water treatment

Affordable and swiftly available h-BN@SnO2/TiO2 photocatalysts are being developed through an easy hydrothermally approach was used urea as boric acid precursors. With their constructed photo catalysts, the effect of h-BN@SnO2/TiO2 has been investigated under the assessment of Adsorption agents utilizing X-ray diffraction pattern (XRD), Scanning electron microscopy, Energy dispersive spectroscopic analysis (SEM/EDS), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HR-TEM), and Burner Emit Teller (BET) isotherm testing methods, which also indicated that SnO2/TiO2 and h-BN have been tightly bound together. Because turquoise blue (TB) and Methyl orange (MO) fabric dyes can be found in the industrial wastewater being processed, the photo catalytic degradation process happens to be applied. According to the advantageous linkages of h-BN@SnO2/TiO2 photocatalysts, fantastic efficacy in breakdown towards hazardous compounds has been found. For the decomposition of Turquoise blue (TB) and Methyl orange (MO), the h-BN@SnO2/TiO2 catalysts proved the best performance stability (0.0386 min-1 and 1.524min-1) but were significantly 22 times quicker. Optical catalysis has additionally demonstrated extraordinary resilience and durability throughout five reprocessed efforts. On top of that, an approach enabling photocatalytic breakdown of harmful substances upon h-BN@SnO2/TiO2 has been presented.

Boosting photocatalytic NO oxidation mediated by high redox charge carriers from visible light-driven C3N4/UiO-67 S-scheme heterojunction photocatalyst

The construction of CN/UiO-67 (CNU) S-scheme heterojunction composites through in situ formation of UiO-67 on carbon nitride (C3N4) helps to address the limitations of carbon nitride (CN) in photocatalytic NO elimination. The optimized CNU3 demonstrates superior photocatalytic efficiency, which is attributed to electronic channels constructed by Zr-N bonds and S-scheme electron transport mechanism, effectively promoting the efficient separation of photogenerated charge carriers with high redox potentials. Density Functional Theory (DFT) calculations reveal redistributed electronic orbitals in CNU3, with progressive and continuous energy levels near the Fermi level, which bolsters electronic conduction. Comprehensive quenching experiments, Electron Paramagnetic Resonance (EPR), and in situ Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) analyses highlight a synergistic interplay of electrons, holes, and superoxide radicals in CNU3, inhibiting the generation of toxic nitrogen oxide intermediates and culminating in highly efficient photocatalytic NO oxidation. This study not only elucidates the mechanisms underpinning the enhanced performance of CNU3 heterojunctions but also offers new perspectives on the preparation and interfacial charge separation of heterojunction photocatalysts.

Solar-matched S-scheme ZnO/g-C3N4 for visible light-driven paracetamol degradation

In pursuit of an efficient visible light driven photocatalyst for paracetamol degradation in wastewater, we have fabricated the ZnO/g-C3N4 S-Scheme photocatalysts and explored the optimal percentage to form a composite of graphitic carbon nitride (g-C3N4) with zinc oxide (ZnO) for enhanced performance. Our study aimed to address the urgent need for a catalyst capable of environmentally friendly degradation of paracetamol, a common pharmaceutical pollutant, using visible light conditions. Here, we tailored the band gap of a photocatalyst to match solar radiation as a transformative advancement in environmental catalysis. Notably, the optimized composite, containing 10 wt.% g-C3N4 with ZnO, demonstrated outstanding paracetamol degradation efficiency of 95% within a mere 60-min exposure to visible light. This marked enhancement represented a 2.24-fold increase in the reaction rate compared to lower wt. percentage composites (3 wt.% g-C3N4) and pristine g-C3N4. The exceptional photocatalytic activity of the optimized composite can be attributed to the band gap narrowing that closely matched the maximum solar radiation spectrum. This, coupled with efficient charge transfer mechanisms through S-scheme heterojunction formation and an abundance of active sites due to increased surface area and reduced particle size, contributed to the remarkable performance. Trapping experiments identified hydroxyl radicals as the primary reactive species responsible for paracetamol photoreduction. Furthermore, the synthesized ZnO/g-C3N4 composite exhibited exceptional photostability and reusability, underscoring its practical applicability. Thus, this research marks a significant stride towards the development of an effective and sustainable visible light photocatalyst for the removal of pharmaceutical contaminants from aquatic environments.

Polydopamine Coating of Graphitic Carbon Nitride, g-C3N4, Improves Biomedical Application

Graphitic carbon nitride (g-C3N4) is an intriguing nanomaterial that exhibits photoconductive fluorescence properties under UV-visible light. Dopamine (DA) coating of g-C3N4 prepared from melamine was accomplished via self-polymerization of DA as polydopamine (PDA). The g-C3N4 was coated with PDA 1, 3, and 5 times repeatedly as (PDA@g-C3N4) in tris buffer at pH 8.5. As the number of PDA coatings was increased on g-C3N4, the peak intensity at 1512 cm-1 for N-H bending increased. In addition, the increased weight loss values of PDA@g-C3N4 structures at 600 °C from TGA thermograms confirmed that the coating was accomplished. The band gap of g-C3N4, 2.72 eV, was reduced to 0.87 eV after five coatings with PDA. A pristine g-C3N4 was found to have an isoelectric point (IEP) of 4.0, whereas the isoelectric points of 1PDA@g-C3N4 and 3PDA@g-C3N4 are close to each other at 3.94 and 3.91, respectively. On the other hand, the IEP of 5PDA@g-C3N4 was determined at pH 5.75 assuming complete coating with g-C3N4. The biocompatibility of g-C3N4 and PDA@g-C3N4 against L929 fibroblast cell lines revealed that all PDA@g-C3N4 coatings were found to be biocompatible up to a 1000 mg/mL concentration, establishing that PDA coatings did not adversely affect the biocompatibility of the composite materials. In addition, PDA@g-C3N4 was screened for antioxidant potential via total phenol content (TPC) and total flavonoid content assays and it was found that PDA@g-C3N4 has recognizable TPC values and increased linearly with an increased number of PDA coatings. Furthermore, blood compatibility of pristine g-C3N4 is enhanced considerably upon PDA coating, affirmed by hemolysis and the blood clotting index%. Additionally, α-glucosidase inhibitory properties of PDA@g-C3N4 structures revealed that 67.6 + 9.8% of this enzyme was evenly inhibited by 3PDA@g-C3N4 structure.

Heterogeneous Organocatalysts for Light-Driven Reactions in Continuous Flow

Within the realm of organic synthesis, photocatalysis has blossomed since the beginning of the last decade. A plethora of classical reactivities, such as selective oxidation of alcohol and amines, redox radical formation of reactive species in situ, and indirect activation of an organic substrate for cycloaddition by EnT, have been revised in a milder and more sustainable fashion via photocatalysis. However, even though the spark of creativity leads scientists to explore new reactions and reactivities, the urgency of replacing the toxic and critical metals that are involved as catalysts has encouraged chemists to find alternatives in the branch of science called organocatalysis. Unfortunately, replacing metal catalysts with organic analogues can be too expensive sometimes; however, this drawback can be solved by the reutilization of the catalyst if it is heterogeneous. The aim of this review is to present the recent works in the field of heterogeneous photocatalysis, applied to organic synthesis, enabled by continuous flow. In detail, among the heterogeneous catalysts, g-CN, polymeric photoactive materials, and supported molecular catalysts have been discussed within their specific sections, rather than focusing on the types of reactions.

Intrinsic Self-Trapped Excitons in Graphitic Carbon Nitride

Graphitic carbon nitrides (g-C3N4) as low-cost, chemically stable, and ecofriendly layered semiconductors have attracted rapidly growing interest in optoelectronics and photocatalysis. However, the nature of photoexcited carriers in g-C3N4 is still controversial, and an independent charge-carrier picture based on the band theory is commonly adopted. Here, by performing transient spectroscopy studies, we show characteristics of self-trapped excitons (STEs) in g-C3N4 nanosheets including broad trapped exciton-induced absorption, picosecond exciton trapping without saturation at high photoexcitation density, and transient STE-induced stimulated emissions. These features, together with the ultrafast exciton trapping polarization memory, strongly suggest that STEs intrinsically define the nature of the photoexcited states in g-C3N4. These observations provide new insights into the fundamental photophysics of carbon nitrides, which may enlighten novel designs to boost energy conversion efficiency.

Photocatalytic activity of dual defect modified graphitic carbon nitride is robust to tautomerism: machine learning assisted ab initio quantum dynamics

Two-dimensional graphitic carbon nitride (GCN) is a popular metal-free polymer for sustainable energy applications due to its unique structure and semiconductor properties. Dopants and defects are used to tune GCN, and dual defect modified GCN exhibits superior properties and enhanced photocatalytic efficiency in comparison to pristine or single defect GCN. We employ a multistep approach combining time-dependent density functional theory and nonadiabatic molecular dynamics (NAMD) with machine learning (ML) to investigate coupled structural and electronic dynamics in GCN over a nanosecond timescale, comparable to and exceeding the lifetimes of photo-generated charge carriers and photocatalytic events. Although frequent hydrogen hopping transitions occur among four tautomeric structures, the electron-hole separation and recombination processes are only weakly sensitive to the tautomerism. The charge separated state survives for about 10 ps, sufficiently long to enable photocatalysis. The employed ML-NAMD methodology provides insights into rare events that can influence excited state dynamics in the condensed phase and nanoscale materials and extends NAMD simulations from pico- to nanoseconds. The ab initio quantum dynamics simulation provides a detailed atomistic mechanism of photoinduced evolution of charge carriers in GCN and rationalizes how GCN remains photo-catalytically active despite its multiple isomeric and tautomeric forms.

Metallosalen modified carbon nitride a versatile and reusable catalyst for environmentally friendly aldehyde oxidation

The development of environmentally friendly catalysts for organic transformations is of great importance in the field of green chemistry. Aldehyde oxidation reactions play a crucial role in various industrial processes, including the synthesis of pharmaceuticals, agrochemicals, and fine chemicals. This paper presents the synthesis and evaluation of a new metallosalen carbon nitride catalyst named Co(salen)@g-C3N4. The catalyst was prepared by doping salicylaldehyde onto carbon nitride, and subsequently, incorporating cobalt through Schiff base chemistry. The Co(salen)@g-C3N4 catalyst was characterized using various spectroscopic techniques including Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), Infrared Spectroscopy (IR), and Thermogravimetric Analysis (TGA). Furthermore, after modification with salicylaldehyde, the carbon nitride component of the catalyst exhibited remarkable yields (74-98%) in oxidizing various aldehyde derivatives (20 examples) to benzoic acid. This oxidation reaction was carried out under mild conditions and resulted in short reaction times (120-300 min). Importantly, the catalyst demonstrated recyclability, as it could be reused for five consecutive runs without any loss of activity. The reusable nature of the catalyst, coupled with its excellent yields in oxidation reactions, makes it a promising and sustainable option for future applications.

Recent advances in ternary Z-scheme photocatalysis on graphitic carbon nitride based photocatalysts

Due to its excellent photocatalytic performance over the last few years, graphitic-like carbon nitride (g-C3N4) has garnered considerable notice as a photocatalyst. Nevertheless, several limitations, including small surface area, the rates at which photo-generated electrons and holes recombine are swift, and the inefficient separation and transport of photoexcited carriers continue to impede its solar energy utilization. To overcome those limitations in single-component g-C3N4, constructing a heterogeneous photocatalytic system has emerged as an effective way. Among the various studies involving the incorporation of hetero composite materials to design heterojunctions, among the most promising approaches is to assemble a Z-scheme photocatalytic configuration. The Z-scheme configuration is essential because it facilitates efficient photocarrier separation and exhibits superior redox ability in separated electrons and holes. Moreover, ternary composites have demonstrated enhanced photocatalytic activities and reinforced photostability. Ternary Z-scheme heterostructures constructed with g-C3N4 possess all the above-mentioned merits and provide a pioneering strategy for implementing photocatalytic systems for environmental and energy sustainability. A summary of the latest technological advancements toward design and fabrication in ternary all-solid-state Z-scheme (ASSZ) and direct Z-scheme (DZ) photocatalysts built on g-C3N4 is presented in this review. Furthermore, the review also discusses the application of ternary Z-scheme photocatalytic architecture established on g-C3N4.

Metal-organic framework heterojunctions for photocatalysis

Heterojunctions combining two photocatalysts of staggered conduction and valence band energy levels can increase the photocatalytic efficiency compared to their individual components. This activity enhancement is due to the minimization of undesirable charge recombination by the occurrence of carrier migration through the heterojunction interface with separated electrons and holes on the reducing and oxidizing junction component, respectively. Metal-organic frameworks (MOFs) are currently among the most researched photocatalysts due to their tunable light absorption, facile charge separation, large surface area and porosity. The present review summarizes the current state-of-the-art in MOF-based heterojunctions, providing critical comments on the construction of these heterostructures. Besides including examples showing the better performance of MOF heterojunctions for three important photocatalytic processes, such as hydrogen evolution reaction, CO2 photoreduction and dye decolorization, the focus of this review is on describing synthetic procedures to form heterojunctions with MOFs and on discussing the experimental techniques that provide evidence for the operation of charge migration between the MOF and the other component. Special attention has been paid to the design of rational MOF heterojunctions with small particle size and controlled morphology for an appropriate interfacial contact. The final section summarizes the achievements of the field and provides our views on future developments.

Growth of Ag/g-C3N4 nanocomposites on nickel foam to enhance photocatalytic degradation of formaldehyde under visible light

Formaldehyde is a pollutant that significantly affects the indoor air quality. However, conventional remediation approaches can be challenging to deal with low-concentration formaldehyde in an indoor environment. In this study, Photocatalysts of Ag/graphitic carbon nitride (g-C3N4)/Ni with 3D reticulated coral structure were prepared by thermal polymerization and liquid phase photo-deposition, using nickel foam (NF) as the carrier. Experiments demonstrated that when the Ag concentration was 3%, and the relative humidity was 60%, the Ni/Ag/g-C3N4 showed the maximum degradation rate of formaldehyde at 90.19% under visible light irradiation, and the formaldehyde concentration after degradation was lower than the Hygienic standard stated by the Chinese Government. The porous structure of Ni/Ag/g-C3N4 and the formation of Schottky junctions promoted the Adsorption efficiency and degradation of formaldehyde, while the nickel foam carrier effectively promoted the desorption of degradation products. Meanwhile, the degradation rate was only reduced by 3.4% after 16 recycles, the three-dimensional porous structure extended the lifetime of the photocatalyst. This study provides a new strategy for the degradation of indoor formaldehyde at low concentrations.

Benzopyrene elimination from the environment using graphitic carbon nitride-SnS nanocomposites

Benzopyrene (BaP) stands as a potent polycyclic aromatic hydrocarbon (PAH) molecule, boasting five fused aromatic rings, making its way into the human food chain through soil contamination. The persistent environmental presence of PAHs in soil, attributed to industrial exposure, is primarily due to their low molecular weight and hydrophobic nature. To preemptively address the entry of BaP into the food chain, the application of nanocomposites was identified as an effective remediation strategy. Post-synthesis, comprehensive characterization tests employing techniques such as UV-DRS, XRD, SEM-EDX, FTIR, and DLS unveiled the distinctive features of the g-C3N4-SnS nanocomposites. These nanocomposites exhibited spherical shapes embedded on layers of nanosheets, boasting particle diameters measuring 88.9 nm. Subsequent tests were conducted to assess the efficacy of eliminating benzopyrene from a combination of PAH molecules and g-C3N4-SnS nanocomposites. Varied parameters, including PAH concentration, adsorbent dosage, and suspension pH, were systematically explored. The optimized conditions for the efficient removal of BaP utilizing the g-C3N4-SnS nanocomposite involved 2 μg/mL of benzopyrene, 10 μg/mL of the nanocomposite, and a pH of 5, considering UV light as the irradiation source. The investigation into the mechanism governing BaP elimination closely aligned with batch adsorption results involved a thorough exploration of adsorption kinetics and isotherms. Photocatalytic degradation of benzopyrene was achieved, reaching a maximum of 86 % in 4 h and 36 % in 2 h, with g-C3N4-SnS nanocomposite acting as the catalyst. Further validation through HPLC data confirmed the successful removal of BaP from the soil matrix.

Enhanced Charge Separation in Single Atom Cobalt Based Graphitic Carbon Nitride: Time Domain Ab Initio Analysis

In recent years, single atom catalysts have been at the forefront of energy conversion research, particularly in the field of catalysis. Carbon nitrides offer great potential as hosts for stabilizing metal atoms due to their unique electronic structure. We use ab initio nonadiabatic molecular dynamics to study photoexcitation dynamics in single atom cobalt based graphitic carbon nitride. The results elucidate the positive effect of the doped cobalt atom on the electronic structure of GCN. Cobalt doping produces filled midgap states that serve as oxidation centers, advantageous for various redox reactions. The presence of midgap states enables the harvesting of longer wavelength photons, thereby extending the absorption range of solar light. Although doping accelerates charge relaxation overall, charge recombination is significantly slower than charge separation, creating beneficial conditions for catalysis applications. The simulations reveal the detailed microscopic mechanism underlying the improved performance of the doped system due to atomic defects and demonstrate an effective charge separation strategy to construct highly efficient and stable photocatalytic two-dimensional materials.

Computational Assessment of the Biocompatibility of Two-Dimensional g-C3N3 Toward Lipid Membranes

One of the most recent additions to the family of two-dimensional (2D) materials, graphitic C3N3 (g-C3N3), has been considered a viable contender for biomedical applications, although its potential toxicity remains elusive. We perform all-atom molecular dynamics simulations to decipher the interactions between model lipid membranes and g-C3N3 as a first step toward exploring the cytotoxicity induced at the nanoscale. We show that g-C3N3 can easily insert into the cellular membranes following a multistage mechanism consisting of simultaneous desolvation of the 2D material along with enrichment of nanomaterial-lipid interactions. Free energy calculations indicate that g-C3N3 is more stable in a membrane-bound state compared to an aqueous solution; however, the insertion of the material does not disturb the structural integrity of lipid membranes. After being inserted into a membrane, g-C3N3 is unlikely to be released into the cellular environment and is incapable of extracting lipid molecules from the membrane. The nature of interaction between the 2D material and membranes is found to be independent of the nanomaterial size. Also, the performance of g-C3N3 toward biomolecular delivery is shown to be significantly improved compared to the state-of-the-art 2D materials graphene and hexagonal boron nitride (h-BN). It is revealed that, the affinity of g-C3N3 toward lipid membranes is weaker compared to the nanotoxic graphene and h-BN, while being marginally higher than h2D-C2N, which in turn, increases the biocompatibility of the material, thereby brightening its future as a noncytotoxic material for forthcoming biomedical applications.

Tailoring C─N Containing Compounds into Carbon Nanomaterials with Tunable Morphologies for Electrocatalytic Applications

Carbon materials with unique sp2 -hybridization are extensively researched for catalytic applications due to their excellent conductivity and tunable physicochemical properties. However, the development of economic approaches to tailoring carbon materials into desired morphologies remains a challenge. Herein, a convenient "bottom-up" strategy by pyrolysis of graphitic carbon nitride (g-C3 N4 ) (or other carbon/nitrogen (C, N)-enriched compounds) together with selected metal salts and molecules is reported for the construction of different carbon-based catalysts with tunable morphologies, including carbon nano-balls, carbon nanotubes, nitrogen/sulfur (S, N) doped-carbon nanosheets, and single-atom catalysts, supported by carbon layers. The catalysts are systematically investigated through various microscopic, spectroscopic, and diffraction methods and they demonstrate promising and broad applications in electrocatalysis such as in the oxygen reduction reaction and water splitting. Mechanistic monitoring of the synthesis process through online thermogravimetric-gas chromatography-mass spectrometry measurements indicates that the release of C─N-related moieties, such as dicyan, plays a key role in the growth of carbon products. This enables to successfully predict other widely available precursor compounds beyond g-C3 N4 such as caffeine, melamine, and urea. This work develops a novel and economic strategy to generate morphologically diverse carbon-based catalysts and provides new, essential insights into the growth mechanism of carbon nanomaterials syntheses.

Super-hydrophilic LaCoO3/g-C3N4 nanocomposite coated beauty sponge for solar-driven seawater desalination with simultaneous volatile organic compound removal

Interfacial solar steam generation (ISSG) is emerging as a promising, environment-friendly solution for fulfilling freshwater and energy demands. However, a critical challenge for ISSG lies in the presence of harmful volatile organic compounds (VOCs) in the feedwater which are co-evaporated with water, leading to more enriched concentration in condensed water. Herein, lanthanum cobaltate-graphitic carbon nitride (LaCoO3/g-C3N4, LCO/g-CN) nanocomposite decorated beauty sponge (LCO/g-CN@BS) is proposed as an efficient photothermal/photocatalytic material for solar-driven seawater desalination and simultaneous VOC degradation. The hydrophobic surface of the beauty sponge after LCO/g-CN coating becomes super-hydrophilic, ensuring sufficient water supply and our LCO/g-CN@BS delivers an evaporation rate of 1.94 kg m-2 h-1 under 1 sun irradiation. This LCO/g-CN@BS shows excellent seawater desalination capacity with a self-cleaning ability when employed for saltwater purification for a salt (NaCl) concentration as high as 15 wt%. Moreover, fast photocarrier transfer between LCO and g-CN leads to enhanced photocatalytic degradation of over 90% of phenol simultaneously, which is about 60% for only an LCO-based beauty sponge. This work presents a promising approach to combining novel nanocomposites with microporous structures for efficient solar desalination, offering simultaneous VOC degradation.

Fluorescent Graphitic Carbon Nitride (g-C3N4)-Embedded Hyaluronic Acid Microgel Composites for Bioimaging and Cancer-Cell Targetability as Viable Theragnostic

Fluorescent graphitic carbon nitride (g-C3N4) doped with various heteroatoms, such as B, P, and S, named Bg-C3N4, Pg-C3N4, and Sg-C3N4, were synthesized with variable band-gap values as diagnostic materials. Furthermore, they were embedded within hyaluronic acid (HA) microgels as g-C3N4@HA microgel composites. The g-C3N4@HA microgels had a 0.5-20 μm size range that is suitable for intravenous administration. Bare g-C3N4 showed excellent fluorescence ability with 360 nm excitation wavelength and 410-460 emission wavelengths for possible cell imaging application of g-C3N4@HA microgel composites as diagnostic agents. The g-C3N4@HA-based microgels were non-hemolytic, and no clotting effects on blood cells or cell toxicity on fibroblasts were observed at 1000 μg/mL concentration. In addition, approximately 70% cell viability for SKMEL-30 melanoma cells was seen with Sg-C3N4 and its HA microgel composites. The prepared g-C3N4@HA and Sg-C3N4@HA microgels were used in cell imaging because of their excellent penetration capability for healthy fibroblasts. Furthermore, g-C3N4-based materials did not interact with malignant cells, but their HA microgel composites had significant penetration capability linked to the binding function of HA with the cancerous cells. Flow cytometry analysis revealed that g-C3N4 and g-C3N4@HA microgel composites did not interfere with the viability of healthy fibroblast cells and provided fluorescence imaging without any staining while significantly decreasing the viability of cancerous cells. Overall, heteroatom-doped g-C3N4@HA microgel composites, especially Sg-C3N4@HA microgels, can be safely used as multifunctional theragnostic agents for both diagnostic as well as target and treatment purposes in cancer therapy because of their fluorescent nature.

Facile access to pyridinium-based bent aromatic amphiphiles: nonionic surface modification of nanocarbons in water

Efficient water-solubilization of nanocarbons is desirable for both their biological and material applications, but so far has mainly relied on covalent modifications or amphiphiles featuring ionic side-chains. Here, we report a facile 2-4-step synthesis of pyridinium-based, bent aromatic amphiphiles with modular nonionic side-chains (i.e., CH3 and CH2CH2(OCH2CH2)2-Y (Y = OCH3, OH, and imidazole)). The new amphiphiles quantitatively self-assemble into ≈2 nm-sized aromatic micelles in water independent of the side-chain. Importantly, efficient water-solubilization and nonionic surface modification of various nanocarbons (e.g., fullerene C60, carbon nanotubes, and graphene nanoplatelets) are achieved through noncovalent encircling with the bent amphiphiles. The resultant imidazole-modified nanocarbons display a pH-responsive surface charge, as evidenced by NMR and zeta-potential measurements. In addition, solubilization of a nitrogen-doped nanocarbon (i.e., graphitic carbon nitride) in the form of 10-30 nm-sized stacks is also demonstrated using the present amphiphiles.

Highly efficient visible-light induced N-doped ZnO@g-C3N4 and S-doped ZnO@g-C3N4 photocatalysts for environmental remediation

Facile, cost-effective and eco-friendly synthesis of N-doped ZnO@g-C3N4 and S-doped ZnO@g-C3N4 photocatalysts towards efficient degradation of environmental pollutants was achieved. The as-synthesized 2 wt% N-doped ZnO@g-C3N4 and 2 wt% S-doped ZnO@g-C3N4 achieved 96.2% and 90.4% degradation efficiencies towards crystal violet (100 ppm) within 45 min irradiation and 99.3% and 92.3% photocatalytic degradation efficiencies towards brilliant green (100 ppm) dye within 30 min irradiation, respectively, under a normal 90 W LED light instead of an expensive commercial light source. Moreover, the N-doped ZnO@g-C3N4 and S-doped ZnO@g-C3N4 nanocomposites showed excellent stability in the photodegradation of crystal violet and brilliant green dyes. The modification made on ZnO by doping with nitrogen and sulphur enhances the visible-light absorption as well as the separation of photoexcited charge carriers. The active radicals ˙OH and ˙O2- are both identified to play important roles in the photodegradation of crystal violet and brilliant green.

Construction of a stable S-scheme NiSnO3/g-C3N4 heterojunction on activated carbon fibre for the degradation of glyphosate in water under flow condition

Creating light-harvesting heterojunctions as a photocatalyst is critical for efficiently treating organics-laden wastewater. Yet the materials stabilization and limited reusability hinder their practical applications. In this study, an S-scheme heterojunction in the Sn-based perovskite and g-C3N4 (gCN) composite, supported on an activated carbon fiber (ACF) substrate, is developed for glyphosate (GLP) degradation under water under flow conditions. The reusable NiSnO3-gCN/ACF photocatalyst was synthesized using a simple wet impregnation and calcination method. The supported photocatalyst achieved 99% GLP-removal at 4 mL/min water flowrate and 1.25 g/m2 of photocatalyst loading in ACF. The photocatalyst showed a stable structure and repeat photocatalytic performance across 5 cycles despite prolonged visible light exposure under flow conditions. The materials stability is attributed to the effective dispersion of NiSnO3-gC3N4 in ACF, preventing the photocatalyst from elution in water flow. Radical trapping experiment revealed the superoxide and hydroxyl radicals as the primary reactive species in the GLP-degradation pathway. A plausible S-scheme mechanism was proposed for heterojunction formation, based on the high resolution deconvoluted spectra of X-ray photoelectron spectroscopy and the radical trapping experimental results. The inexpensive Sn-based perovskite synthesized in this study is indicated as an alternative to Ti-based perovskites for wastewater remediation application.

Nitrogen Defect-Rich Graphitic Carbon Nitride for Highly Sensitive Voltammetric Determination of Tryptophan

Here, a highly sensitive electrochemical sensor for detection of tryptophan (Trp) using a nitrogen defect graphitic carbon nitride-modified glassy carbon electrode (ND-CN/GCE) was introduced. ND-CN/GCE showed a higher oxidation current for Trp than the graphitic carbon nitride-modified glassy carbon electrode (g-CN/GCE) and bare glassy carbon electrode (BGCE). The synthesized nitrogen defect-rich graphitic carbon nitride (ND-CN) was characterized using X-ray photoelectron spectroscopy, X-ray diffraction spectroscopy, Fourier-transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy. Electrochemical impedance spectroscopy and cyclic voltammetry were used to further analyze the electrochemical properties of BGCE, g-CN/GCE, and ND-CN/GCE. The oxidation of Trp at ND-CN/GCE is a diffusion-controlled process at pH 3.0. It was calculated that the transfer coefficient, rate constant, and diffusion coefficient of Trp were 0.53, 2.24 × 103 M-1 s-1, and 8.3 × 10-3 cm2 s-1, respectively, at ND-CN/GCE. Trp was detected using square wave voltammetry, which had a linear range from 0.01 to 40 μM at pH 3.0 and a limit of detection of about 0.0034 μM (3σ/m). Analyzing the presence of Trp in a milk and multivitamin tablet sample with a percentage recovery in the range of 97.0-108% satisfactorily demonstrated the practical usability of the electrochemical sensor. The ND-CN/GCE additionally displays good repeatability and reproducibility and satisfactory selectivity.

Ag/g-C3N4 nanocomposite: Green fabrication and its application as a catalyst in the synthesis of new series of depsipeptides as biologically active compounds and investigation on their anti-breast cancer activity

In this study, we bring forward a green and novel eco-friendly strategy for the fabrication of Ag/g-C3N4 nanocomposite via a fast in-situ generation method using Ferula Gummosa extracts as both stabilizer and reducing agent. Ag/g-C3N4 nanocomposite was analyzed by Fourier transform infrared spectra (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX-MAP), and transmission electron microscopy (TEM). After procurement and characterization, the catalytic activity of the prepared reagent was surveyed in the synthesis of a new series of depsipeptides using aspirin/ketoprofen, cyclohexyl isocyanide, and aryl aldehydes at ambient temperature in EtOH/H2O as a green media. Taking into account the economic and environmental facets, the method bestows some advantages such as using plant extracts as green media for the preparation of Ag nanoparticles, simple work-up procedure, mild reaction conditions, short reaction times, and high yields of the products. Additionally, the Ag/g-C3N4 nanocomposite catalyst can be recycled effectually and reused several times without a substantial loss in reactivity.

Emergence of CuInS2 derived photocatalyst for environmental remediation and energy conversion

Hydrogen production, catalytic organic synthesis, carbon dioxide reduction, environmental purification, and other major fields have all adopted photocatalytic technologies due to their eco-friendliness, ease of use, and reliance on sunlight as the driving force. Photocatalyst is the key component of photocatalytic technology. Thus, it is of utmost importance to produce highly efficient, stable, visible-light-responsive photocatalysts. CIS stands out among other visible-light-response photocatalysts for its advantageous combination of easy synthesis, non-toxicity, high stability, and suitable band structure. In this study, we took a brief glance at the synthesis techniques for CIS after providing a quick introduction to the fundamental semiconductor features, including the crystal and band structures of CIS. Then, we discussed the ways doping, heterojunction creation, p-n heterojunction, type-II heterojunction, and Z-scheme may be used to modify CIS's performance. Subsequently, the applications of CIS towards pollutant degradation, CO2 reduction, water splitting, and other toxic pollutants remediation are reviewed in detail. Finally, several remaining problems with CIS-based photocatalysts are highlighted, along with future potential for constructing more superior photocatalysts.

Carbon Nitrides from Supramolecular Crystals: From Single Atoms to Heterojunctions and Advanced Photoelectrodes

Carbon nitride materials (CN) have become one of the most studied photocatalysts within the last 15 years. While CN absorbs visible light, its low porosity and fast electron-hole recombination hinder its photoelectric performance and have motivated the research in the modification of its physical and chemical properties (such as energy band structure, porosity, or chemical composition) by different means. In this Concept we review the utilization of supramolecular crystals as CN precursors to tailor its properties. We elaborate on the features needed in a supramolecular crystal to serve as CN precursor, we delve on the influence of metal-free crystals in the morphology and porosity of the resulting materials and then discuss the formation of single atoms and heterojunctions when employing a metal-organic crystal. We finally discuss the performance of CN photoanodes derived from crystals and highlight the current standing challenges in the field.

Facile synthesis of FeCeOx nanoparticles encapsulated carbon nitride catalyst for highly efficient and recyclable synthesis of substituted imidazoles

Herein, we developed a novel composite called FeCeOx@g-C3N4 through a combination of sonication, sintering, and hydrothermal techniques to implement the principles of green chemistry by utilizing reusable nanocomposites in one-pot reactions. To gain a comprehensive understanding of the catalyst's structure, composition, and morphology, various characterization methods were employed. These included FT-IR analysis to examine chemical bonds, SEM and TEM imaging to visualize the catalyst's surface and internal structure, TGA to assess thermal stability, EDS for elemental composition analysis, and XRD to determine crystal structure. The FeCeOx@g-C3N4 nanocatalyst demonstrated remarkable efficacy in the one-pot synthesis of 2,4,5-trisubstituted and 1,2,4,5-tetrasubstituted imidazole. Noteworthy features of this catalyst included high percentage yield, mild reaction conditions, short reaction time, and an efficient and straightforward procedure. Furthermore, the FeCeOx@g-C3N4 composite exhibited excellent recyclability and reusability. It could be recycled and reused up to four times without a significant decline in catalytic activity.

Graphitic Carbon Nitride/Zinc Oxide-Based Z-Scheme and S-Scheme Heterojunction Photocatalysts for the Photodegradation of Organic Pollutants

Graphitic carbon nitride (g-C3N4), a metal-free polymer semiconductor, has been recognized as an attractive photocatalytic material for environmental remediation because of its low band gap, high thermal and photostability, chemical inertness, non-toxicity, low cost, biocompatibility, and optical and electrical efficiency. However, g-C3N4 has been reported to suffer from many difficulties in photocatalytic applications, such as a low specific surface area, inadequate visible-light utilization, and a high charge recombination rate. To overcome these difficulties, the formation of g-C3N4 heterojunctions by coupling with metal oxides has triggered tremendous interest in recent years. In this regard, zinc oxide (ZnO) is being largely explored as a self-driven semiconductor photocatalyst to form heterojunctions with g-C3N4, as ZnO possesses unique and fascinating properties, including high quantum efficiency, high electron mobility, cost-effectiveness, environmental friendliness, and a simple synthetic procedure. The synergistic effect of its properties, such as adsorption and photogenerated charge separation, was found to enhance the photocatalytic activity of heterojunctions. Hence, this review aims to compile the strategies for fabricating g-C3N4/ZnO-based Z-scheme and S-scheme heterojunction photocatalytic systems with enhanced performance and overall stability for the photodegradation of organic pollutants. Furthermore, with reference to the reported system, the photocatalytic mechanism of g-C3N4/ZnO-based heterojunction photocatalysts and their charge-transfer pathways on the interface surface are highlighted.

Preparation of Oxygen-Doping Nongraphitic Carbon Nitride via Efficiency Exfoliation for the Application of Photocatalytic Degradation

E-OLCN photocatalyst was synthesized by oxygen doping of low molecular weight carbon nitride (LCN) with ethanol solvent stripping. The enhanced light absorption, fast electron transport rate, and photogenerated carrier separation efficiency of E-OLCN leads to the excellent photocatalytic degradation performance compared with the original materials. The synergistic effect of oxygen doping and ethanol solvent stripping plays a significant role for the modulation of electronic and structural properties of the prepared catalysts. Methyl orange (MO) and rhodamine B (RhB) are chosen as typical pollutants for the application of photocatalytic degradation. The E-OLCN sample exhibits outstanding photocatalytic degradation performance, where the rate constant k (1 × 10-2 min-1) of E-OLCN (1.68) is 2.9 times than that of O-LCN (0.58) and 8.8 times than that of pristine LCN (0.19) for MO. Moreover, modulated E-OLCN shows good stability after cycling experiments and the activity still achieved 90%. The detailed mechanism for MO degradation was proposed with the technical support of liquid chromatography-mass spectrometry (LC-MS) and electron spin resonance (EPR). The superoxide radical (·O2-) is the main active species and the MO molecule could be decomposition completely.

Carbon Nitride Loaded with an Ultrafine, Monodisperse, Metallic Platinum-Cluster Cocatalyst for the Photocatalytic Hydrogen-Evolution Reaction

For the realization of a next-generation energy society, further improvement in the activity of water-splitting photocatalysts is essential. Platinum (Pt) is predicted to be the most effective cocatalyst for hydrogen evolution from water. However, when the number of active sites is increased by decreasing the particle size, the Pt cocatalyst is easily oxidized and thereby loses its activity. In this study, a method to load ultrafine, monodisperse, metallic Pt nanoclusters (NCs) on graphitic carbon nitride is developed, which is a promising visible-light-driven photocatalyst. In this photocatalyst, a part of the surface of the Pt NCs is protected by sulfur atoms, preventing oxidation. Consequently, the hydrogen-evolution activity per loading weight of Pt cocatalyst is significantly improved, 53 times, compared with that of a Pt-cocatalyst loaded photocatalyst by the conventional method. The developed method is also effective to enhance the overall water-splitting activity of other advanced photocatalysts such as SrTiO3 and BaLa4 Ti4 O15 .

Research on the Antibacterial Properties of MXene-Based 2D-2D Composite Materials Membrane

Novel MXene-based two-dimensional (2D) membranes are widely used for water purification due to their highly controllable structure and antibacterial properties. However, in the process of membrane separation, the problems of membrane fouling, especially biological fouling, limits the further application of MXene-based membranes. In this study, in order to improve the antibacterial and separation properties of membranes, three kinds of MXene-based 2D-2D composite membranes (M2~M4) were prepared using polyethersulfone (PES) as the substrate, which were GO@MXene, O-g-C₃N₄@MXene and BiOCl@MXene composite membranes respectively. The results showed that the antibacterial activity of M2~M4 against Escherichia coli and Staphylococcus aureus was further improved, especially the antibacterial ratio of M4 against Escherichia coli and Staphylococcus aureus was up to 50% and 82.4%, respectively. By comparing the surface morphology of MXene membrane and modified membrane treated bacteria through scanning electron microscopy (SEM), it was found that the cell density on modified membrane was significantly lower than that of pure MXene membrane.

Design and synthesis of high performance magnetically separable exfoliated g-C3N4/γ-Fe2O3/ZnO yolk-shell nanoparticles: a novel and eco-friendly photocatalyst toward removal of organic pollutants from water

Herein, a new visible-light active exfoliated g-C3N4/γ-Fe2O3/ZnO yolk-shell nanoparticles (NPs) was synthesized as a magnetically separable photocatalyst. For an in-depth understanding of the magnetic photocatalyst's structural, morphological, and optical properties, the products were extensively characterized with FT-IR, XRD, TEM, HRTEM, FESEM, EDS, EDS-mapping, VSM, DRS, EIS, and photocurrent. The photocatalyst was then utilized to degrade Levofloxacin (LEVO) and Indigo Carmine (IC) by visible light at room temperature. The exfoliated g-C3N4/γ-Fe2O3/ZnO yolk-shell NPs photocatalyst revealed 80% and 95.6% degradation efficiency for Levofloxacin and Indigo Carmine within 25 and 15 min, respectively. In addition, the optimal factors such as concentration, loading of photocatalyst, and pH were also assessed. Levofloxacin degradation mechanistic studies showed that electrons and holes significantly contribute to the photocatalytic process of photocatalyst degradation. In addition, after 5 times regeneration, exfoliated g-C3N4/γ-Fe2O3/ZnO yolk-shell NPs remained as an excellent magnetic photocatalyst for the eco-friendly degradation of Levofloxacin and Indigo Carmine (76% and 90%), respectively. The superior photocatalytic performance of exfoliated g-C3N4/γ-Fe2O3/ZnO yolk-shell nanoparticles (NPs) was mostly ascribed to the synergistic advantages of stronger visible light response, larger specific surface area, and the more effective separation and transfer of photogenerated charge carriers. Based on these results, the highly effective magnetic photocatalyst achieved better results than numerous studied catalysts in the literature. The degradation of Levofloxacin and Indigo Carmine under environmentally friendly conditions can be achieved using exfoliated g-C3N4/γ-Fe2O3/ZnO yolk-shell NPs (V) as an efficient and green photocatalyst. The magnetic photocatalyst was characterized by spectroscopic and microscopic methods, revealing a spherical shape and particle size of 23 nm. Additionally, the magnetic photocatalyst could be separated from the reaction mixture by a magnet without significantly reducing its catalytic activity.

Theoretical Studies on the Quantum Capacitance of Two-Dimensional Electrode Materials for Supercapacitors

In recent years, supercapacitors have been widely used in the fields of energy, transportation, and industry. Among them, electrical double-layer capacitors (EDLCs) have attracted attention because of their dramatically high power density. With the rapid development of computational methods, theoretical studies on the physical and chemical properties of electrode materials have provided important support for the preparation of EDLCs with higher performance. Besides the widely studied double-layer capacitance (C_D), quantum capacitance (C_Q), which has long been ignored, is another important factor to improve the total capacitance (C_T) of an electrode. In this paper, we survey the recent theoretical progress on the C_Q of two-dimensional (2D) electrode materials in EDLCs and classify the electrode materials mainly into graphene-like 2D main group elements and compounds, transition metal carbides/nitrides (MXenes), and transition metal dichalcogenides (TMDs). In addition, we summarize the influence of different modification routes (including doping, metal-adsorption, vacancy, and surface functionalization) on the C_Q characteristics in the voltage range of ±0.6 V. Finally, we discuss the current difficulties in the theoretical study of supercapacitor electrode materials and provide our outlook on the future development of EDLCs in the field of energy storage.

Integrating K and P co-doped g-C3N4 with ZnFe2O4 and graphene oxide for S-scheme-based enhanced absorption coupled photocatalytic real wastewater treatment

Recently, there has been a significant increase in the interest of using photocatalysis for environmental clean-up applications. In this research, potassium, and phosphorus co-doped graphitic carbon nitride (KPCN) photocatalyst modified with graphene oxide (GO) and heterostructured with ZnFe₂O₄ was synthesized via the hydrothermal method (KPCN/GO/ZnFe₂O₄). The photoactivity of KPCN/GO/ZnFe₂O₄ photocatalyst was examined for the photocatalytic degradation of target pollutants such as methylene blue (MB) dye, rhodamine B (RhB) dye, and tetracycline (TC) antibiotic. Furthermore, the chemical oxygen demand (COD) removal efficiency for real wastewater was determined to explore the practical application of KPCN/GO/ZnFe₂O₄ photocatalyst. The degradation efficiencies of bare graphitic carbon nitride, KPCN, KPCN/GO, and KPCN/GO/ZnFe₂O₄ photocatalysts for tetracycline antibiotics were 30%, 42%, 57%, and 87% within 60 min, respectively. Moreover, KPCN/GO/ZnFe₂O₄ photocatalyst showed 71% COD removal efficiency within 240 min. The ^•OH and ^•O₂^- were the major reactive species in the photocatalytic process. Results showed that the degradation efficiencies of graphitic carbon nitride were greatly enhanced upon doping and further improved with the addition of GO and ZnFe₂O₄. Doping improved light harvesting, GO enhanced the adsorption ability and heterojunction with ZnFe₂O₄ enhanced the charge separation as well as the reusability of synthesized KPCN/GO/ZnFe₂O₄ photocatalyst.

One-step calcination synthesis of 2D/2D g-C3N4/WS2 van der Waals heterojunction for visible light-induced photocatalytic degradation of pharmaceutical pollutants

It is well-documented that accumulation of pharmaceutically active compounds (PhACs), such as antibiotics, in aquatic ecosystems is a prominent environmental hazard. Herein, a series of 2D materials-based heterojunctions, conceptualized based on the integration of graphitic carbon nitride (g-C₃N₄) with tungsten disulfide (WS₂), was fabricated through a facile one-step calcination process, and systematically evaluated for eliminating tetracycline (TC) and sulfamethoxazole (SMX) from aqueous matrices. The microstructure, optical properties, and surface chemistry of the as-prepared composites were examined with a range of microscopy and spectroscopy techniques. In comparison with pristine g-C₃N₄ or bare WS₂, the g-C₃N₄/WS₂ material, with optimal WS₂ loading, showed significantly improved photocatalytic activity, towards degradation of TC (84%) and SMX (96%), under visible light. Free radical scavenging experiments revealed that superoxide anions and hydroxyl radicals were predominantly responsible for the rapid breakdown of the PhACs. In addition, the dissociation intermediates and residues were identified and the plausible photocatalytic degradation pathways of TC and SMX over the as-constructed 2D/2D heterojunction were discussed. Further, the photocatalysis end products were non-toxic, as inferred via the resazurin cell viability assay, employing Escherichia coli as a model organism. Most importantly, the 2D/2D g-C₃N₄/WS₂ architecture was structurally resilient and exhibited a fairly stable cycling performance for persistent usage in wastewater treatment. The outcomes of this study testify that 2D/2D heterojunction of g-C₃N₄ fragments and WS₂ nanosheets holds great promise for destroying antibiotics or their metabolites, usually present in wastewaters.

Rapid elimination of antibiotic gemifloxacin mesylate and methylene blue over Pt nanoparticles dispersed chitosan/g-C3N4 ternary visible light photocatalyst

Appropriate material selection and proper understanding of bandgap modification are key factors for the development of efficient photocatalysts. Herein, we developed an efficient, well-organized visible light oriented photocatalyst based on g-C₃N₄ in association with polymeric network of chitosan (CTSN) and platinum (Pt) nanoparticles utilizing a straightforward chemical approach. Modern techniques like XRD, XPS, TEM, FESEM, UV-Vis, and FTIR spectroscopy were exploited for characterization of synthesized materials. XRD results confirmed the involvement of α-polymorphic form of CTSN in graphitic carbon nitride. XPS investigation confirmed the establishment of trio photocatalytic structure among Pt, CTSN, and g-C₃N₄. TEM examination showed that the synthesized g-C₃N₄ possesses fine fluffy sheets like structure (100 to 500 nm in size) intermingled with a dense layered framework of CTSN with good dispersion of Pt nanoparticles on g-C₃N₄ and CTSN composite structure. The bandgap energies for g-C₃N₄, CTSN/g-C₃N₄, and Pt@ CTSN/g-C₃N₄ photocatalysts were found to be 2.94, 2.73, and 2.72 eV, respectively. The photodegradation skills of each created structure have been examined on antibiotic gemifloxacin mesylate and methylene blue (MB) dye. The newly developed Pt@CTSN/g-C₃N₄ ternary photocatalyst was found to be efficacious for the elimination of gemifloxacin mesylate (93.3%) in 25 min and MB (95.2%) just in 18 min under visible light. Designed Pt@CTSN/g-C₃N₄ ternary photocatalytic framework exhibited ⁓ 2.20 times more effective than bare g-C₃N₄ for the destruction of antibiotic drug. This study provides a simple route towards the designing of rapid, effective visible light oriented photocatalyts for the existing environmental issues.

Alkali functionalized carbon nitride with internal van der Waals heterostructures: Directional charge flow to enhance photocatalytic hydrogen production

Improving the charge separation and migration in graphitic carbon nitride (CN) is the critical issue to enhance its photocatalytic performance, but still remains very challenging. Herein, the alkali metals were introduced into the interlayer and intralayer of CN to tackle this challenge. The lithium sodium-modifying carbon nitride layer (LiNaCN2) and the adjacent CN layer formed a van der Waals heterostructures (VDWHs), while the potassium-intercalating served as interlayer charge transfer channels to induce the directional charge flow. Experiments and theoretical calculations indicated that such unique construction provided intrinsic driving force to obtain the electrons from LiNaCN2 to CN via directional potassium channels. In accordance with the theoretical prediction, a dramatically red-shift of the light absorption feature was achieved for interlayer potassium-intercalating and intralayer lithium sodium-modifying co-functionalized carbon nitride (LiNaCN-K-CN2) to show narrowed bandgap energy of 2.15 eV. This directional charge flow in CN resulted in the rapid transfer of charge carriers in both interlayer as well as intralayer of CN, which reduced the electronic localization as well as extended the π conjugative effect. Consequently, the LiNaCN-K-CN2 displayed stable and remarkable hydrogen production rate of about 2.46 mmol g^-1 h^-1 with apparent quantum yield (AQY) of about 13.68% at 435 nm, which was 22 folds higher than that of the pristine CN. This finding provides the feasible strategy to precisely tune the directions of charge transfer for high-performance CN-based photocatalysts.

Single-Atom Anchored g-C3N4 Monolayer as Efficient Catalysts for Nitrogen Reduction Reaction

Electrochemical N₂ reduction reaction (NRR) is a promising approach for NH₃ production under mild conditions. Herein, the catalytic performance of 3d transition metal (TM) atoms anchored on s-triazine-based g-C₃N₄ (TM@g-C₃N₄) in NRR is systematically investigated by density functional theory (DFT) calculations. Among these TM@g-C₃N₄ systems, the V@g-C₃N₄, Cr@g-C₃N₄, Mn@g-C₃N₄, Fe@g-C₃N₄, and Co@g-C₃N₄ monolayers have lower ΔG(*NNH) values, especially the V@g-C₃N₄ monolayer has the lowest limiting potential of -0.60 V and the corresponding limiting-potential steps are *N2+H++e-=*NNH for both alternating and distal mechanisms. For V@g-C₃N₄, the transferred charge and spin moment contributed by the anchored V atom activate N₂ molecule. The metal conductivity of V@g-C₃N₄ provides an effective guarantee for charge transfer between adsorbates and V atom during N₂ reduction reaction. After N₂ adsorption, the p-d orbital hybridization of *N₂ and V atoms can provide or receive electrons for the intermediate products, which makes the reduction process follow acceptance-donation mechanism. The results provide an important reference to design high efficiency single atom catalysts (SACs) for N₂ reduction.

Insights into engineered graphitic carbon nitride quantum dots for hazardous contaminants degradation in wastewater

Increased environmental pollution is a critical issue that must be addressed. Photocatalytic, adsorption, and membrane filtration methods are suitable in environmental governance because of their high selectivity, low cost, environment-friendly nature, and excellent treatment efficiency. Graphitic carbon nitride (g-C₃N₄) quantum dots (QDs) have been considered as photocatalysts, adsorbents, and membrane materials for wastewater treatments, owing to their stability, adsorption capacity, photochemical properties, and low toxicity and cost. This review summarizes g-C₃N₄ QD synthesis techniques, operating parameters affecting the removal performance in the treatment process, modification effects with other semiconductors, and benefits and drawbacks of g-C₃N₄ QD-based materials. Furthermore, this review discusses the practical applications of g-C₃N₄ QDs as adsorbents, photocatalysts, and membrane materials for organic and inorganic contaminant treatments and their value-added product formation potential. Modified g-C₃N₄ QD-based material adsorbents, photocatalysts, and membranes present potentially applicable effects, such as removal of most waterborne contaminants. Excellent results were obtained for the reduction of methyl orange, bisphenol A, tetracycline, ciprofloxacin, phenol, rhodamine B, E. coli, and Hg. Overall, this paper provides comprehensive background on g-C₃N₄ QD-based materials and their diverse applications in wastewater treatment, and it presents a foundation for the enhancement of similar unique materials in the future.

The Adsorption Behaviors and Mechanisms of Humic Substances by Thermally Oxidized Graphitic Carbon Nitride

Thermal oxidation is efficient for enhancing the photocatalysis performance of graphitic carbon nitride (g-C₃N₄), while its effect on adsorption performance has not been fully studied, which is crucial to the application of g-C₃N₄ as adsorbents and photocatalysts. In this study, thermal oxidation was used to prepare sheet-like g-C₃N₄ (TCN), and its application for adsorption of humic acids (HA) and fulvic acids (FA) was evaluated. The results showed that thermal oxidation clearly affected the properties of TCN. After thermal oxidation, the adsorption performance of TCN was enhanced significantly, and the adsorption amount of HA increased from 63.23 (the bulk g-C₃N₄) to 145.35 mg/g [TCN prepared at 600 °C (TCN-600)]. Based on fitting results using the Sips model, the maximum adsorption amounts of TCN-600 for HA and FA were 327.88 and 213.58 mg/g, respectively. The adsorption for HA and FA was markedly affected by pH, alkaline, and alkaline earth metals due to electrostatic interactions. The major adsorption mechanisms included electrostatic interactions, π-π interactions, hydrogen bonding, along with a special pH-dependent conformation (for HA). These findings implied that TCN prepared from environmental-friendly thermal oxidation showed promising prospects for humic substances (HSs) adsorption in natural water and wastewater.

g-C3N4 Based Photocatalyst for the Efficient Photodegradation of Toxic Methyl Orange Dye: Recent Modifications and Future Perspectives

Industrial effluents containing dyes are the dominant pollutants, making the drinking water unfit. Among the dyes, methylene orange (MO) dye is mutagenic, carcinogenic and toxic to aquatic organisms. Therefore, its removal from water bodies through effective and economical approach is gaining increased attention in the last decades. Photocatalytic degradation has the ability to convert economically complex dye molecules into non-toxic and smaller species via redox reactions, by using photocatalysts. g-C₃N₄ is a metal-free n-type semiconductor, typical nonmetallic and non-toxici polymeric photocatalyst. It widely used in photocatalytic materials, due to its easy and simple synthesis, fascinating electronic band structure, high stability and abundant availability. As a photocatalyst, its major drawbacks are its limited efficiency in separating photo-excited electron-hole pairs, high separated charge recombination, low specific surface area, and low absorption coefficient. In this review, we report the recent modification strategies adopted for g-C₃N₄ for the efficient photodegradation of MO dye. The different modification approaches, such as nanocomposites and heterojunctions, as well as doping and defect introductions, are briefly discussed. The mechanism of the photodegradation of MO dye by g-C₃N₄ and future perspectives are discussed. This review paper will predict strategies for the fabrication of an efficient g-C₃N₄-based photocatalyst for the photodegradation of MO dye.

Two dimensional architectures of graphitic carbon nitride with the substitution of heteroatoms for bifunctional electrochemical detection of nilutamide

The exploration of graphitic carbon nitride (g-C₃N₄), a two-dimensional (2D) metal-free polymer semiconducting material, is largely discussed due to its large specific surface area, high electrical conductivity, thermal stability, and adaptable electronic structure. The adaption of sulfur (S) and phosphorous (P) atoms into the layers of g-C₃N₄ increases the electrochemical performance of detecting nilutamide (NT). The aggregation severity can be decreased by integrating S/P into g-C₃N₄, thereby improving surface area and electrical conductance. The g-C₃N₄, S/gC₃N₄, P/g-C₃N₄, and S/P/g-C₃N₄ were studied with X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Field emission scanning electron microscopy (FESEM), Transmission electron microscopy (TEM), Fourier transform infrared (FTIR), Ultraviolet visible spectroscopy (UV), Thermogravimetric analysis (TGA), and Brunauer-Emmett-Teller (BET). The well-assigned S/P/g-C₃N₄ exhibited a good crystalline structure with more active sites for improved electron transfer toward NT detection. Both differential pulse voltammetry (DPV) and amperometry (IT) was studied for NT detection. The electrochemical studies were done with a linear range of 0.019-1.17 μM to 5.36-1891.98 μM in DPV and 0.01 μM-158.3 μM in IT technique. The attained limit of detection in DPV analysis was 3.2 nM and with IT analysis 2.4 nM. The nanocomposite S/P/g-C₃N₄ shows good selectivity towards NT. The fabricated electrode showed excellent repeatability, reproducibility, and stability, with a significant recovery range in real sample analysis.

Ultrafast Charge Injection in Silver-Modified Graphitic Carbon Nitride

Graphitic carbon nitride (gCN) is a promising organic platform for driving light-activated charge-transfer reactions in a number of valuable photocatalytic cycles. A primary limitation of gCN as a photocatalyst is its short excited-state lifetime, which is mediated by a high density of trap and defect sites that result in rapid excited-state decay and low photocatalytic efficiency. To enhance the catalytic activity, gCN is often functionalized with a metal co-catalyst; however, the mechanism by which metal co-catalysts enhance the reactivity has not been clearly established. In this work, the excited-state dynamics of gCN and silver-modified gCN are compared using ultrafast transient absorption and time-resolved photoluminescence spectroscopies. In silver-modified gCN, an ultrafast spectral shift in the silver plasmon resonance provides direct spectral evidence of electron transfer from gCN to the silver nanoparticles. The electron-transfer rate is competitive with other non-radiative relaxation pathways, with electron-transfer yields approaching 50%, thus providing an effective strategy for mitigating losses associated with defects and trap sites.