Ultra-sensitive detection of leukemia by graphene

Perilous paradigm of graphene oxide and its derivatives in biomedical applications: Insight to immunocompatibility

With advancements in nanotechnology and innovative materials, Graphene Oxide nanoparticles (GONP) have attracted lots of attention among the diverse types of nanomaterials owing to their distinctive physicochemical characteristics. However, the usage at scientific and industrial level has also raised concern to their toxicological interaction with biological system. Understanding these interactions is crucial for developing guidelines and recommendations for applications of GONP in various sectors, like biomedicine and environmental technologies. This review offers crucial insights and an in-depth analysis to the biological processes associated with GONP immunotoxicity with multiple cell lines including human whole blood cultures, dendritic cells, macrophages, and multiple cancer cell lines. The complicated interactions between graphene oxide nanoparticles and the immune system, are highlighted in this work, which reveals a range of immunotoxic consequences like inflammation, immunosuppression, immunostimulation, hypersensitivity, autoimmunity, and cellular malfunction. Moreover, the immunotoxic effects are also highlighted with respect to in vivo models like mice and zebrafish, insighting GO Nanoparticles' cytotoxicity. The study provides invaluable review for researchers, policymakers, and industrialist to understand and exploit the beneficial applications of GONP with a controlled measure to human health and the environment.

Cascaded amplifying circuit enables sensitive detection of fungal pathogens

The rapid and accurate detection of fungal pathogens is of utmost importance in the fields of healthcare, food safety, and environmental monitoring. In this study, we implemented a cascaded amplifying circuit in Saccharomyces cerevisiae to improve the G protein-coupled receptor (GPCR) mediated fungal detection. The GPCR signaling pathway was coupled with the galactose-regulated (GAL) system and a positive feedback loop was implemented to enhance the performance of yeast biosensor. We systematically compared four generations of biosensors for detecting the mating pheromone of Candida albicans, and the best biosensor exhibited the limit of detection (LOD) as low as 0.25 pM and the limit of quantification (LOQ) of 1 pM after 2 h incubation. Subsequently, we developed a betaxanthin-based colorimetric module for the easy visualization of signal outputs, and the resulting biosensors can give reliable naked-eye readouts. In summary, we demonstrated that cascaded amplifying circuits could substantially improve the engineered yeast biosensors with a better sensitivity and signal output magnitude, which will pave the way for their real-world applications in public health.

Targeting ferroptosis for leukemia therapy: exploring novel strategies from its mechanisms and role in leukemia based on nanotechnology

The latest findings in iron metabolism and the newly uncovered process of ferroptosis have paved the way for new potential strategies in anti-leukemia treatments. In the current project, we reviewed and summarized the current role of nanomedicine in the treatment and diagnosis of leukemia through a comparison made between traditional approaches applied in the treatment and diagnosis of leukemia via the existing investigations about the ferroptosis molecular mechanisms involved in various anti-tumor treatments. The application of nanotechnology and other novel technologies may provide a new direction in ferroptosis-driven leukemia therapies. The article explores the potential of targeting ferroptosis, a new form of regulated cell death, as a new therapeutic strategy for leukemia. It discusses the mechanisms of ferroptosis and its role in leukemia and how nanotechnology can enhance the delivery and efficacy of ferroptosis-inducing agents. The article not only highlights the promise of ferroptosis-targeted therapies and nanotechnology in revolutionizing leukemia treatment, but also calls for further research to overcome challenges and fully realize the clinical potential of this innovative approach. Finally, it discusses the challenges and opportunities in clinical applications of ferroptosis.

Graphene oxide-manganese oxide composite as an electrocatalyst for simultaneous detection of manganese- and chromium-contaminated water

The development of a sensitive and selective electrochemical sensor for simultaneous quantification of manganese (Mn(II)) and chromium (Cr(VI)) using composite of graphene oxide (GO) and manganese oxide modified screen printed carbon electrode (GO-Mn2O3/SPCE) is reported for the first time. The good sensing performance is achieved by mixing GO prepared by modified Hummer's method (GO-H) with proper particle size of Mn2O3 (241 nm). The mechanism of this sensor is based on the formation of Mn-O and Cr-O on the modified electrode with assistance of oxygen moieties provided by both Mn2O3 NPs and GO. The analytical performances were investigated by measuring electrochemical signal of Mn(II) and Cr(VI) by using square-wave cathodic stripping voltammetry (SWCSV). This sensor holds low electrode-to-electrode variation (relative standard deviation (RSD) < 4%) with a good limit of detection (LOD) at about 6.67 and 11.20 μg⋅L-1 for Mn(II) and Cr(VI), respectively. Applicability of this sensor was demonstrated by measuring Mn(II) and Cr(VI) in tap water samples with recovery of 90.77-103.45% and 82.34-103.73% for Mn(II) and Cr(VI) determinations, respectively. With the contribution of both GO and Mn2O3 as electrocatalysts, this developed sensor is capable to be used for water quality monitoring in real samples.

Emerging Graphitic Carbon Nitride-based Nanobiomaterials for Biological Applications

Graphitic carbon nitride (g-CN) based nanostructures are distinctive materials with unique compositional, structural, optical, and electronic properties with exceptional band structure, moderate surface area, and exceptional thermal and chemical stability. Because of these properties, g-CN based nanomaterials have shown promising applications and higher performance in the biological avenue. This review covers the state-of-the-art synthetic strategies used for the preparation of the materials, the basic structure, and a panorama of different optimization strategies leading to improved physicochemical properties responsible for the biological application. The following sections include the recent progress in the use of g-CN based nanobiomaterials for biosensors, bioimaging, photodynamic therapy, drug delivery, chemotherapy, and the antimicrobial segment. Furthermore, we have summarized the role and evaluation of biosafety and biocompatibility of the material. Finally, the unresolved issues, plausible challenges, current status, and future perspectives for the development and design of g-CN have been summarized and are expected to promote a clinical path for the medical sector and human well-being.

Peptide nucleic acid and antifouling peptide based biosensor for the non-fouling detection of COVID-19 nucleic acid in saliva

The electrochemical biosensor with outstanding sensitivity and low cost is regarded as a viable alternative to current clinical diagnostic techniques for various disease biomarkers. However, their actual analytical use in complex biological samples is severely hampered due to the biofouling, as they are also highly sensitive to nonspecific adsorption on the sensing interfaces. Herein, we have constructed a non-fouling electrochemical biosensor based on antifouling peptides and the electroneutral peptide nucleic acid (PNA), which was used as the recognizing probe for the specific binding of the viral RNA of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Different from the negatively charged DNA probes that will normally weaken the biosensors' antifouling capabilities owing to the charge attraction of positively charged biomolecules, the neutral PNA probe will generate no side-effects on the biosensor. The biosensor demonstrated remarkable sensitivity in detecting SARS-CoV-2 viral RNA, possessing a broad linear range (1.0 fM - 1.0 nM) and a detection limit down to 0.38 fM. Furthermore, the sensing performance of the constructed electrochemical biosensor in human saliva was nearly similar to that in pure buffer, indicating satisfying antifouling capability. The combination of PNA probes with antifouling peptides offered a new strategy for the development of non-fouling sensing systems capable of assaying trace disease biomarkers in complicated biological media.

Recent advances in sustainable nature-based functional materials for biomedical sensor technologies

The lightweight, low-density, and low-cost natural polymers like cellulose, chitosan, and silk have good chemical and biodegradable properties due to their individually unique structural and functional elements. However, the mechanical properties of these polymers differ from each other. In this scenario, chitosan lacks good mechanical properties than cellulose and silk. The synthesis of nano natural polymer and reinforcement with suitable chemical compounds as the development of nanocomposite gives them promising multidisciplinary applications. Many kinds of research are already published with innovative bio-derived polymeric functional materials (Bd-PFM) applications. Most research interest is carried out on health concerns. Lots of attention has been paid to biomedical applications of Bd-PFM as biosensors. This review aims to provide a glimpse of the nanostructures Bd-PFM biosensors.

Portable reduced graphene oxide biosensor for detection of rabies virus in bats using nasopharyngeal swab samples

Rabies is a lethal zoonotic disease caused by rabies virus (RABV) that affects human health and the economy. RABV is transmitted mainly by bats in Brazil, and surveillance in remote areas is hampered by the difficulty of properly collecting samples during fieldwork and the diagnosis is performed in laboratory conditions. Here, we report a portable electrochemical biosensor based on nucleic acid interactions for RABV detection in nasopharyngeal swab samples. The working electrode of the biosensor is composed of reduced graphene oxide (rGO) thin-film immobilized with cDNA through pi-pi stacking to enhance virus detection and specificity. Sensor performance was determined using RNA, and swab samples from bats. RNA detection shows good selectivity, and quantification presents a highly linear calibration curve (R² = 0.990) using a concentration range of 0.145-25.39 ng/μL. A LOD of 0.104 ng/μL was reached with a sensitivity of 0.321 μA (ng/μL)^-1. RABV detection in nasopharyngeal swab samples showed a good difference of positive sample from negative with a response time in seconds, ultra-fast detection compared to known techniques. Three biosensor groups were identified and named after physic-chemical surface characterization as: GO-1, GO-2, and rGO; with best performance for rGO group due to its sp² hybridized network. Thus, we have successfully fabricated a promising electrochemical biosensor for fast in-situ detection of the RABV in swab samples, which can be expanded to other enveloped viruses that have RNA.

Laser-Induced Graphene Capacitive Killing of Bacteria

Laser-induced graphene (LIG) is a method of generating a foam-like conformal carbon layer of porous graphene on many types of carbon-based surfaces. This electrically conductive material has been shown to be useful in many applications including environmental technology and includes low fouling and antimicrobial surfaces and can address persistent environmental challenges spawned by bacterial and viral contaminates. Here, we show that a single film of LIG stores charge when an electrical current is applied and dissipates charge when the current is stopped, which results in electricidal surface antibacterial potency. The amount of accumulated and dissipated charge on a single strip of LIG was quantified with an electrometer by generating LIG on both sides of a nonconducting polyimide film, which showed up to 65 pC of charge when the distance between the surfaces was 94 μm corresponding to an areal capacitance of 1.63 pF/cm². We further corroborate the stored charge decay of a single LIG strip with bacteria death via direct electrical contact. Antimicrobial rates decreased with the same monotonic pattern as the loss of charge from the LIG film (i.e., AR ∼ 97% 0 s after voltage source disconnection vs AR ∼ 21% 90 s after disconnection) showing bacterial death as a function of delayed LIG exposure time after applied voltage disconnection. In terms of energy efficiency, this translates to an increased bacteria potency of ∼170% for the equivalent energy costs as that previously estimated. Finally, we present a mechanistic explanation for the capacitive behavior and the electricidal effects for a single plate of LIG.

Smart Graphene-Based Electrochemical Nanobiosensor for Clinical Diagnosis: Review

The technological improvement in the field of physics, chemistry, electronics, nanotechnology, biology, and molecular biology has contributed to the development of various electrochemical biosensors with a broad range of applications in healthcare settings, food control and monitoring, and environmental monitoring. In the past, conventional biosensors that have employed bioreceptors, such as enzymes, antibodies, Nucleic Acid (NA), etc., and used different transduction methods such as optical, thermal, electrochemical, electrical and magnetic detection, have been developed. Yet, with all the progresses made so far, these biosensors are clouded with many challenges, such as interference with undesirable compound, low sensitivity, specificity, selectivity, and longer processing time. In order to address these challenges, there is high need for developing novel, fast, highly sensitive biosensors with high accuracy and specificity. Scientists explore these gaps by incorporating nanoparticles (NPs) and nanocomposites (NCs) to enhance the desired properties. Graphene nanostructures have emerged as one of the ideal materials for biosensing technology due to their excellent dispersity, ease of functionalization, physiochemical properties, optical properties, good electrical conductivity, etc. The Integration of the Internet of Medical Things (IoMT) in the development of biosensors has the potential to improve diagnosis and treatment of diseases through early diagnosis and on time monitoring. The outcome of this comprehensive review will be useful to understand the significant role of graphene-based electrochemical biosensor integrated with Artificial Intelligence AI and IoMT for clinical diagnostics. The review is further extended to cover open research issues and future aspects of biosensing technology for diagnosis and management of clinical diseases and performance evaluation based on Linear Range (LR) and Limit of Detection (LOD) within the ranges of Micromolar µM (10^-6), Nanomolar nM (10^-9), Picomolar pM (10^-12), femtomolar fM (10^-15), and attomolar aM (10^-18).

Quantitative and amplification-free detection of SOCS-1 CpG methylation percentage analyses in gastric cancer by fiber optic nanoplasmonic biosensor

A new innovative approach is essential for early and effective diagnosis of gastric cancer, using promoter hypermethylation of the tumor suppressor, SOCS-1, that is frequently inactivated in human cancers. We have developed an amplification-free fiber optic nanoplasmonic biosensor for detecting DNA methylation of the SOCS-1 human genome. The method is based on the fiber optic nanogold-linked sorbent assay of PCR-free DNA from human gastric tumor tissue and cell lines. We designed a specific DNA probe fabricated on the fiber core surface while the other probe is bioconjugated with gold nanoparticles in free form to allow percentage determination and differentiating the methylated and unmethylated cell lines, further demonstrating the SOCS-1 methylation occurs in cancer patients but not in normal cell lines. The observed detection limit is 0.81 fM for methylated DNA, and the detection time is within 15 min. In addition, our data were significantly correlated to the data obtained from PCR-based pyrosequencing, and yet with superior accuracy. Hence our results provide new insight to the quantitative evaluation of methylation status of the human genome and can act as an alternative to PCR with a great potential.

An Update on Graphene Oxide: Applications and Toxicity

Graphene oxide (GO) has attracted much attention in the past few years because of its interesting and promising electrical, thermal, mechanical, and structural properties. These properties can be altered, as GO can be readily functionalized. Brodie synthesized the GO in 1859 by reacting graphite with KClO3 in the presence of fuming HNO3; the reaction took 3-4 days to complete at 333 K. Since then, various schemes have been developed to reduce the reaction time, increase the yield, and minimize the release of toxic byproducts (NO2 and N2O4). The modified Hummers method has been widely accepted to produce GO in bulk. Due to its versatile characteristics, GO has a wide range of applications in different fields like tissue engineering, photocatalysis, catalysis, and biomedical applications. Its porous structure is considered appropriate for tissue and organ regeneration. Various branches of tissue engineering are being extensively explored, such as bone, neural, dentistry, cartilage, and skin tissue engineering. The band gap of GO can be easily tuned, and therefore it has a wide range of photocatalytic applications as well: the degradation of organic contaminants, hydrogen generation, and CO2 reduction, etc. GO could be a potential nanocarrier in drug delivery systems, gene delivery, biological sensing, and antibacterial nanocomposites due to its large surface area and high density, as it is highly functionalized with oxygen-containing functional groups. GO or its composites are found to be toxic to various biological species and as also discussed in this review. It has been observed that superoxide dismutase (SOD) and reactive oxygen species (ROS) levels gradually increase over a period after GO is introduced in the biological systems. Hence, GO at specific concentrations is toxic for various species like earthworms, Chironomus riparius, Zebrafish, etc.

Various types of electrochemical biosensors for leukemia detection and therapeutic approaches

Leukemia often initiates following dysfunctions in hematopoietic stem cells lineages. Various types of leukemia, including acute lymphoblastic leukemia (ALL), chronic myelogenous leukemia (CML), acute promyelocytic leukemia (APL), and human T-cell leukemia/lymphoma virus type 1 (HTLV-1) can thus call for different diagnosis and treatment options. One of the most important subjects in leukemia is the early detection of the disease for effective therapeutic purposes. In this respect, biosensors detecting the molecules of deoxyribonucleic acid (DNA) as analytes are called genosensors or DNA biosensors. Electrochemical sensors, as the most significant approach, also involve reacting of chemical solutions with sensors to generate electrical signals proportional to analyte concentrations. Biosensors can further help detect cancer cells in the early stages of the disease. Moreover, electrochemical biosensors, developed based on various nanomaterials (NMs), can increase sensitivity to the detection of leukemia-related genes, e.g., BCR/ABL as a fusion gene and promyelocytic leukemia/retinoic acid receptor alpha (PML/RARα). Therefore, the present review reflects on previous studies recruiting different NMs for leukemia detection.

Graphene-Coated Halloysite Nanoclay Membrane for the Enhanced Separation of Hydrogen from a Hydrogen-Helium Mixture

This study highlights the separation of hydrogen from H₂-He mixture gas by a graphene-coated halloysite nanoclay membrane. The graphene-coated clay membrane along with its pure clay counterpart is successfully developed and studied for gas separation using hydrogen (H₂)-helium (He) single and mixture gases. Hydrothermal and nonhydrothermal methods were applied for the synthesis of a ″coated″ membrane on a porous alumina substrate from the graphene and halloysite clay. To date, nanoporous zeolites are the potential materials for gas separation based on a molecular sieving mechanism. A similar separation mechanism for hydrogen and helium from mixture gases may not work efficaciously due to the closeness of their kinetic diameter (H₂: 2.89 Å and He: 2.6 Å). The presence of defects and torn nanopores between graphene layers along with the different surface charges of the inner and outer layer of halloysite nanotubes facilitates the ″coated″ membrane to show an appreciable H₂/He separation factor of ∼4 using H₂-He (1:1) mixture gas compared to 2.86 for the pure halloysite membrane. The available charge layer of graphene also has a significant contribution for this increased H₂/He selectivity value. The permeate flux of H₂ and He through both the graphene-coated clay membrane and pure clay membrane has also been noted. The permeate flux of pure H₂ and He was 2 × 10^-7 and 1.3 × 10^-7 mol m^-2 s^-1 Pa^-1 for the clay membrane, whereas for the ″coated″ clay membrane, the values changed to 0.1 × 10^-7 and ∼0.05 × 10^-7 mol m^-2 s^-1 Pa^-1 at 100 kPa, respectively.

Green porous benzamide-like nanomembranes for hazardous cations detection, separation, and concentration adjustment

Green biomaterials play a crucial role in the diagnosis and treatment of diseases as well as health-related problem-solving. Typically, biocompatibility, biodegradability, and mechanical strength are requirements centered on biomaterial engineering. However, in-hospital therapeutics require an elaborated synthesis of hybrid and complex nanomaterials capable of mimicking cellular behavior. Accumulation of hazardous cations like K⁺ in the inner and middle ear may permanently damage the ear system. We synthesized nanoplatforms based on Allium noeanum to take the first steps in developing biological porous nanomembranes for hazardous cation detection in biological media. The 1,1,1-tris[[(2'-benzyl-amino-formyl)phenoxy]methyl]ethane (A), 4-amino-benzo-hydrazide (B), and 4-(2-(4-(3-carboxy-propan-amido)benzoyl)hydrazineyl)-4-oxobutanoic acid (B1) were synthesized to obtain green ligands based on 4-X-N-(…(Y(hydrazine-1-carbonyl)phenyl)benzamide, with X denoting fluoro (B2), methoxy (B3), nitro (B4), and phenyl-sulfonyl (B5) substitutes. The chemical structure of ligand-decorated adenosine triphosphate (ATP) molecules (S-ATP) was characterized by FTIR, XRD, AFM, FESEM, and TEM techniques. The cytotoxicity of the porous membrane was patterned by applying different cell lines, including HEK-293, PC12, MCF-7, HeLa, HepG2, and HT-29, to disclose their biological behavior. The morphology of cultured cells was monitored by confocal laser scanning microscopy. The sensitivity of S-ATP to different cations of Na⁺, Mg²⁺, K⁺, Ba²⁺, Zn²⁺, and Cd²⁺ was evaluated by inductively coupled plasma atomic emission spectroscopy (ICP-AES) in terms of extraction efficiency (η). For pH of 5.5, the η of A-based S-ATP followed the order Na⁺ (63.3%) > Mg²⁺ (62.1%) > Ba²⁺ (7.6%) > Ca²⁺ (5.5%); while for pH of 7.4, Na⁺ (37.0%) > Ca²⁺ (33.1%) > K⁺ (25^.7%). The heat map of MTT and dose-dependent evaluations unveiled acceptable cell viability of more than 90%. The proposed green porous nanomembranes would pave the way to use multifunctional green porous nanomembranes in biological membranes.

Emerging Phospholipid Nanobiomaterials for Biomedical Applications to Lab-on-a-Chip, Drug Delivery, and Cellular Engineering

The design of advanced nanobiomaterials to improve analytical accuracy and therapeutic efficacy has become an important prerequisite for the development of innovative nanomedicines. Recently, phospholipid nanobiomaterials including 2-methacryloyloxyethyl phosphorylcholine (MPC) have attracted great attention with remarkable characteristics such as resistance to nonspecific protein adsorption and cell adhesion for various biomedical applications. Despite many recent reports, there is a lack of comprehensive review on the phospholipid nanobiomaterials from synthesis to diagnostic and therapeutic applications. Here, we review the synthesis and characterization of phospholipid nanobiomaterials focusing on MPC polymers and highlight their attractive potentials for applications in micro/nanofabricated fluidic devices, biosensors, lab-on-a-chip, drug delivery systems (DDSs), COVID-19 potential usages for early diagnosis and even treatment, and artificial extracellular matrix scaffolds for cellular engineering.

Bio-Templating: An Emerging Synthetic Technique for Catalysts. A Review

In the last few years, researchers have focused their attention on the synthesis of new catalyst structures based on or inspired by nature. Biotemplating involves the transfer of biological structures to inorganic materials through artificial mineralization processes. This approach offers the main advantage of allowing morphological control of the product, as a template with the desired morphology can be pre-determined, as long as it is found in nature. This way, natural evolution through millions of years can provide us with new synthetic pathways to develop some novel functional materials with advantageous properties, such as sophistication, miniaturization, hybridization, hierarchical organization, resistance, and adaptability to the required need. The field of application of these materials is very wide, covering nanomedicine, energy capture and storage, sensors, biocompatible materials, adsorbents, and catalysis. In the latter case, bio-inspired materials can be applied as catalysts requiring different types of active sites (i.e., redox, acidic, basic sites, or a combination of them) to a wide range of processes, including conventional thermal catalysis, photocatalysis, or electrocatalysis, among others. This review aims to cover current experimental studies in the field of biotemplating materials synthesis and their characterization, focusing on their application in heterogeneous catalysis.

A naturally fluorescent protein C-phycoerythrin and graphene oxide bio-composite as a selective fluorescence 'turn off/on' probe for DNA quantification and characterization

Highly specific graphene-DNA interactions have been at the forefront of graphene-based sensor design for various analytes, including DNA itself. However, in addition to its detection, DNA also needs to be characterized according to its size and concentration in a sample, which is an additional analytical step. Designing a highly sensitive and selective DNA sensing and characterization platform is, thus, of great interest. The present study demonstrates that a bio-derived, naturally fluorescent protein C-phycoerythrin (CPE) - graphene oxide (GO) bio-composite can be used to detect dsDNA in nanomolar quantities efficiently via fluorescent "turn off/on" mechanism. Interaction with GO temporarily quenches CPE fluorescence in a dose-dependent manner. Analytical characterization indicates an indirect charge transfer with a corresponding loss of crystalline GO structure. The fluorescence is regained with the addition of DNA, while other biomolecules do not pose any hinderance in the detection process. The extent of regain is DNA length dependent, and the corresponding calibration curve successfully quantifies the size of an unknown DNA. The incubation time for detection is ~3-5 min. The bio-composite platform also works successfully in a complex biomolecule matrix and cell lysate. However, the presence of serum albumin poses a hinderance in the serum sample. Particle size analysis proves that CPE displacement from GO surface by the incoming DNA is the reason for the 'turn on' response, and that the sensing process is exclusive to dsDNA. This new platform could be an exciting and rapid DNA sensing and characterization tool.

A non-invasive tool for early detection of acute leukemia in children using a paper-based optoelectronic nose based on an array of metallic nanoparticles

Volatile organic compounds (VOCs) in blood samples can be used as useful biomarkers to diagnose various human diseases. This study describes the potential of a paper-based sensor array for detecting leukemia using blood VOCs. Blood samples were collected from 59 new leukemia cases and 47 healthy cases as a control group. Each blood sample was divided into two parts; one for a laboratory test and the other was used in our study. Samples were mixed with heparin and then transferred to a sterile container, and a sensor was stacked on its cap. This sensor array contains 16 nanoparticles deposited on a sheet of hydrophobic paper in a 4 × 4 array format. Containers were stored in an oven at 60 °C for 4.5 h. Then, the image of sensors was recorded by a scanner and compared to the image before exposing the blood vapor. The sensor responses were subjected to different multivariate statistical methods to develop models that discriminate between control and leukemia samples. The interaction of nanoparticles with the volatile metabolome of blood caused aggregation and consequently changing in the color of nanoparticles. The color changes resulted in a specific pattern for blood samples with leukemia, which is different from those obtained from healthy specimens. The discrimination analysis was approved by pattern recognition methods such as principal component analysis with 97% accuracy. Among 59 patients, the mean age was 6.02 ± 4.55 years (range 1-16 y). The mean total response was 652.83 ± 117.02. The rock curve showed an accuracy of 96% for classifying patients from the control group. The logistic regression model showed that 93.6% of healthy and 93.2% of patients were classified correctly by using this method. These statistics agree with the classification results obtained by principal component analysis. For every 5000-unit increase in platelet count, the chance of leukemia decreased by 9%. Additionally, the chance of being categorized as a patient decreased by 10% for every 20-unit increase in total response. The electronic nose using VOC's of blood is a non-invasive and inexpensive tool for detecting new cases of leukemia with high sensitivity and specificity. Platelet count is an essential para-clinical parameter determining the total response of the sensors. Follow up studies with a larger sample size are warranted to elucidate its clinical applicability.

Effect of Graphene Family Materials on Multiple Myeloma and Non-Hodgkin's Lymphoma Cell Lines

The interest around the graphene family of materials is constantly growing due to their potential application in biomedical fields. The effect of graphene and its derivatives on cells varies amongst studies depending on the cell and tissue type. Since the toxicity against non-adherent cell lines has barely been studied, we investigated the effect of graphene and two different graphene oxides against four multiple myeloma cell lines, namely KMS-12-BM, H929, U226, and MM.1S, as well as two non-Hodgkin lymphoma cells lines, namely KARPAS299 and DOHH-2. We performed two types of viability assays, MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide conversion) and ATP (adenosine triphosphate detection), flow cytometry analysis of apoptosis induction and cell cycle, cell morphology, and direct interaction analysis using two approaches-visualization of living cells by two different systems, and visualization of fixed and dyed cells. Our results revealed that graphene and graphene oxides exhibit low to moderate cytotoxicity against cells, despite visible interaction between the cells and graphene oxide. This creates possibilities for the application of the selected graphene materials for drug delivery systems or theragnostics in hematological malignancies; however, further detailed studies are necessary to explain the nature of interactions between the cells and the materials.

On the mechanical characteristics of graphene nanosheets: a fully nonlinear modified Morse model

In this paper, the mechanical properties of graphene nanosheets are evaluated based on the nonlinear modified Morse model. The interatomic interactions including stretching and bending of the covalent bonds between carbon atoms, are replaced by nonlinear extensional and torsional spring-like elements. The finite element method is implemented to analyze the model under different loading conditions and linear characteristics of the graphene structure including the Young's modulus, surface modulus, shear modulus and Poisson's ratio are evaluated for various geometries and chirality where these properties are shown to be size and aspect ratio dependent. It is also found that when the dimensions of the sheets are greater than a certain threshold, the structure behaves quasi-isotropically and the directional elastic moduli become close to each other by a relative difference no more than 1%. Using the nonlinear stress-strain curve, the yielding point and ultimate stress and strains of the graphene sheet are also evaluated. The results of this study are compared with available experimental data and previous numerical simulations, where good agreement is achieved.

Graphene aerogel nanoparticles for in-situ loading/pH sensitive releasing anticancer drugs

Free polymer graphene aerogel nanoparticles (GA NPs) were synthesized by using reduction/aggregation of graphene oxide (GO) sheets in the presence of vitamin C (as a biocompatible reductant agent) at a low temperature (40 °C), followed by an effective sonication. Synthesis of GA NPs in doxorubicin hydrochloride (DOX)-containing solution results in the simultaneous synthesis and drug loading with higher performance (than that of the separately synthesized and loaded samples). To investigate the mechanism of loading and the capability of GA NPs in the loading of other drug structures, two groups of ionized (DOX, Amikacin sulfate and, d-glucosamine hydrochloride) and non-ionized (Paclitaxel (PTX)) drugs were examined. Furthermore, the relationship between the bipolar level of DOX solution (contributing to H-bonding of DOX and GO) and the amount of DOX loading was investigated. The DOX showed higher loading (>3 times) than PTX, as anticancer drugs. Since both DOX and PTX possess aromatic structures, the higher loading of DOX was assigned to its positive partial charge and ionized nature. Accordingly, other drugs (having positive partial charge and ionized nature, but no aromatic structure) such as Amikacin sulfate and d-glucosamine hydrochloride presented higher loading than PTX. These results indicated that although the π-π interactions induced by aromatic structures are important in drug loading, the electrostatic interaction of ionized drugs with GO (especially through H-bonding) is the dominant mechanism. DOX-loaded GANPs showed high pH-sensitive release (equivalent to the carrier weight) after 5 days, which can indicate benefits in tumor cell acidic microenvironments in-vivo.

The high energy supercapacitor from rGO/Ni(OH)2/PANI nanocomposite with methane sulfonic acid as dopant

The low energy densities of supercapacitors limit their utilization as energy storage and energy conversion devices. To overcome this limitation, here we present a ternary nanocomposite of reduced graphene oxide (rGO)/nickel hydroxide (Ni(OH)₂/polyaniline (PANI), with methane sulfonic acid as dopant, having weight percentages of 14%:14%:72% (G14NP), respectively, as an electrode material for supercapacitor. With 1 M sulfuric acid (H₂SO₄) as the electrolyte, the supercapacitor yields a high energy density of 120.48 W h kg^-1, comparable with those of Li-ion batteries. The G14NP also exhibits good electrochemical performance with a specific capacitance of 602.40 F g^-1 and a power density of 2584.83 W kg^-1, at a current density of 1 A g^-1. The G14NP also exhibits a promising stability of its electrochemical performances even after 16,500 cycles at a potential scan of 400 mV s^-1. Remarkably, the composite performs exceptionally well at a potential window available in an aqueous electrolyte. The sustainability to high current loading while charging and its power backup application is satisfactorily demonstrated, by charging with a commercial 9 V battery.

Optimization and characterization of magnetite–reduced graphene oxide nanocomposites for demulsification of crude oil in water emulsion

Oily wastewater from the oil and gas industry negatively affects the environment. Oily wastewater typically exists in the form of an oil-in-water emulsion. Conventional methods to treat oily wastewater have low separation efficiency and long separation time and use large equipment. Therefore, a simple but effective method must be developed to separate oil-in-water emulsions with high separation efficiency and short separation times. Magnetite–reduced graphene oxide (M–RGO) nanocomposites were used as a demulsifier in this work. Magnetite nanoparticles (Fe₃O₄) were coated on reduced graphene oxide (rGO) nanosheets via an in situ chemical synthesis method. The synthesized M–RGO nanocomposites are environmentally friendly and can be recovered after demulsification by an external magnetic field. M–RGO characterization was performed using X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, field emission scanning microscopy, Raman spectroscopy, and vibrating sample magnetometry. Demulsification performance was evaluated in terms of M–RGO dosage, effects of pH, and brine concentration. The demulsification capability of M–RGO was determined based on the residual oil content of the emulsion, which was measured with a UV-vis spectrometer. The response surface method was used to determine the optimum conditions of the input variables. The optimum demulsification efficiency achieved at pH 4 and M–RGO dosage of 29 g L⁻¹ was approximately 96%. This finding demonstrates that M–RGO nanocomposites are potential magnetic demulsifiers for oily wastewater that contains oil-in-water emulsions. Also, the recyclability of this nanocomposite has been tested and the results shown that it is a good recyclable demulsifier.

Magnetite reduced graphene oxide were synthesized for separation of crude oil in water emulsion.

Three-Dimensional Graphene Foams: Synthesis, Properties, Biocompatibility, Biodegradability, and Applications in Tissue Engineering

Presently, clinical nanomedicine and nanobiotechnology have impressively demanded the generation of new organic/inorganic analogues of graphene (as one of the intriguing biomedical research targets) for stem-cell-based tissue engineering. Among different shapes of graphene, three-dimensional (3D) graphene foams (GFs) are highly promising candidates to provide conditions for mimicking in vivo environments, affording effective cell attachment, proliferation,and differentiation due to their unique properties. These include the highest biocompatibility among nanostructures, high surface-to-volume ratio, 3D porous structure (to provide a homogeneous/isotropic growth of tissues), highly favorable mechanical characteristics, and rapid mass and electron transport kinetics (which are required for chemical/physical stimulation of differentiated cells). This review aims to describe recent and rapid advances in the fabrication of 3D GFs, together with their use in tissue engineering and regenerative nanomedicine applications. Moreover, we have summarized a broad range of recent studies about the behaviors, biocompatibility/toxicity,and biodegradability of these materials, both in vitro and in vivo. Finally, the highlights and challenges of these 3D porous structures, compared to the current polymeric scaffold competitors, are discussed.

Black Phosphorus and its Biomedical Applications

Black phosphorus (BP), also known as phosphorene, has attracted recent scientific attention since its first successful exfoliation in 2014 owing to its unique structure and properties. In particular, its exceptional attributes, such as the excellent optical and mechanical properties, electrical conductivity and electron-transfer capacity, contribute to its increasing demand as an alternative to graphene-based materials in biomedical applications. Although the outlook of this material seems promising, its practical applications are still highly challenging. In this review article, we discuss the unique properties of BP, which make it a potential platform for biomedical applications compared to other 2D materials, including graphene, molybdenum disulphide (MoS2), tungsten diselenide (WSe2) and hexagonal boron nitride (h-BN). We then introduce various synthesis methods of BP and review its latest progress in biomedical applications, such as biosensing, drug delivery, photoacoustic imaging and cancer therapies (i.e., photothermal and photodynamic therapies). Lastly, the existing challenges and future perspective of BP in biomedical applications are briefly discussed.

Functional Graphene Nanomaterials Based Architectures: Biointeractions, Fabrications, and Emerging Biological Applications

Functional graphene nanomaterials (FGNs) are fast emerging materials with extremely unique physical and chemical properties and physiological ability to interfere and/or interact with bioorganisms; as a result, FGNs present manifold possibilities for diverse biological applications. Beyond their use in drug/gene delivery, phototherapy, and bioimaging, recent studies have revealed that FGNs can significantly promote interfacial biointeractions, in particular, with proteins, mammalian cells/stem cells, and microbials. FGNs can adsorb and concentrate nutrition factors including proteins from physiological media. This accelerates the formation of extracellular matrix, which eventually promotes cell colonization by providing a more beneficial microenvironment for cell adhesion and growth. Furthermore, FGNs can also interact with cocultured cells by physical or chemical stimulation, which significantly mediate their cellular signaling and biological performance. In this review, we elucidate FGNs-bioorganism interactions and summarize recent advancements on designing FGN-based two-dimensional and three-dimensional architectures as multifunctional biological platforms. We have also discussed the representative biological applications regarding these FGN-based bioactive architectures. Furthermore, the future perspectives and emerging challenges will also be highlighted. Due to the lack of comprehensive reviews in this emerging field, this review may catch great interest and inspire many new opportunities across a broad range of disciplines.

Enhanced Resolution of DNA Separation Using Agarose Gel Electrophoresis Doped with Graphene Oxide

In this work, a novel agarose gel electrophoresis strategy has been developed for separation of DNA fragments by doping graphene oxide (GO) into agarose gel. The results show that the addition of GO into agarose gel significantly improved the separation resolution of DNA fragments by increasing the shift distances of both the single DNA fragments and the adjacent DNA fragments and completely eliminating the background noise derived from the diffusion of the excessive ethidium bromide (EB) dye in the gel after electrophoresis. The improved resolution of DNA fragments in GO-doped agarose gel could be attributed to the successive adsorption-desorption processes between DNA fragments and GO sheets, while the elimination of the background noise could be attributed to the adsorption of the excessive EB dye on the surface of GO sheets and high fluorescence quenching efficiency of GO. These results provide promising potential for graphene and its derivate utilized in various electrophoresis techniques for separation and detection of DAN fragments and other biomolecules.

Doped Graphene for DNA Analysis: the Electrochemical Signal is Strongly Influenced by the Kind of Dopant and the Nucleobase Structure

Doping graphene with heteroatoms can alter the electronic and electrochemical properties of the starting material. Contrasting properties should be expected when the doping is carried out with electron donating species (n-type dopants) or with electron withdrawing species (p-type dopants). This in turn can have a profound influence on the electroanalytical performance of the doped material being used for the detection of specific probes. Here we investigate the electrochemical oxidation of DNA bases adenine, guanine, thymine and cytosine on two heteroatom-doped graphene platforms namely boron-doped graphene (p-type dopant) and nitrogen-doped graphene (n-type dopant). We found that overall, boron-doped graphene provided the best response in terms of electrochemical signal sensitivity for all bases. This is due to the electron deficiency of boron-doped graphene, which can promote the oxidation of DNA bases, as opposed to nitrogen-doped graphene which possesses an excess of electrons. Moreover, also the structure of the nucleobase was found to have significant influence on the obtained signal. Our study may open new frontiers in the electrochemical detection of DNA bases which is the first step for label-free DNA analysis.

Nanostructured Aptamer-Functionalized Black Phosphorus Sensing Platform for Label-Free Detection of Myoglobin, a Cardiovascular Disease Biomarker

We report the electrochemical detection of the redox active cardiac biomarker myoglobin (Mb) using aptamer-functionalized black phosphorus nanostructured electrodes by measuring direct electron transfer. The as-synthesized few-layer black phosphorus nanosheets have been functionalized with poly-l-lysine (PLL) to facilitate binding with generated anti-Mb DNA aptamers on nanostructured electrodes. This aptasensor platform has a record-low detection limit (∼0.524 pg mL(-1)) and sensitivity (36 μA pg(-1) mL cm(-2)) toward Mb with a dynamic response range from 1 pg mL(-1) to 16 μg mL(-1) for Mb in serum samples. This strategy opens up avenues to bedside technologies for multiplexed diagnosis of cardiovascular diseases in complex human samples.

Novel Hydrogel Material as a Potential Embolic Agent in Embolization Treatments

We report a novel graphene-oxide (GO) enhanced polymer hydrogel (GPH) as a promising embolic agent capable of treating cerebrovascular diseases and malignant tumors, using the trans-catheter arterial embolization (TAE) technique. Simply composed of GO and generation five poly(amidoamine) dendrimers (PAMAM-5), our rheology experiments reveal that GPH exhibits satisfactory mechanical strength, which resist the high pressures of blood flow. Subcutaneous experiments on Sprague-Dawley (SD) rats demonstrate the qualified biocompatibility of GPH. Finally, our in vivo experiments on New Zealand rabbits, which mix GPH with the X-ray absorbing contrast agent, Iohexol, reveal complete embolization of the artery. We also note that GPH shortens embolization time and exhibits low toxicity in follow-up experiments. Altogether, our study demonstrates that GPH has many advantages over the currently used embolic agents and has potential applications in clinical practice.

Nanomedicine approaches in acute lymphoblastic leukemia

Acute lymphoblastic leukemia (ALL) is the malignancy with the highest incidence amongst children (26% of all cancer cases), being surpassed only by the cancers of the brain and of the nervous system. The most recent research on ALL is focusing on new molecular therapies, like targeting specific biological structures in key points in the cell cycle, or using selective inhibitors for transmembranary proteins involved in cell signalling, and even aiming cell surface receptors with specifically designed antibodies for active targeting. Nanomedicine approaches, especially by the use of nanoparticle-based compounds for the delivery of drugs, cancer diagnosis or therapeutics may represent new and modern ways in the near future anti-cancer therapies. This review offers an overview on the recent role of nanomedicine in the detection and treatment of acute lymphoblastic leukemia as resulting from a thorough literature survey. A short introduction on the basics of ALL is presented followed by the description of the conventional methods used in the ALL detection and treatment. We follow our discussion by introducing some of the general nano-strategies used for cancer detection and treatment. The detailed role of organic and inorganic nanoparticles in ALL applications is further presented, with a special focus on gold nanoparticle-based nanocarriers of antileukemic drugs.

Highly cytocompatible and flexible three-dimensional graphene/polydimethylsiloxane composite for culture and electrochemical detection of L929 fibroblast cells

Recently, three-dimensional graphene interconnected network has attracted great interest as a scaffold structure for tissue engineering due to its high biocompatibility, high electrical conductivity, high specific surface area and high porosity. However, free-standing three-dimensional graphene exhibits poor flexibility and stability due to ease of disintegration during processing. In this work, three-dimensional graphene is composited with polydimethylsiloxane to improve the structural flexibility and stability by a new simple two-step process comprising dip coating of polydimethylsiloxane on chemical vapor deposited graphene/Ni foam and wet etching of nickel foam. Structural characterizations confirmed an interconnected three-dimensional multi-layer graphene structure with thin polydimethylsiloxane scaffold. The composite was employed as a substrate for culture of L929 fibroblast cells and its cytocompatibility was evaluated by cell viability (Alamar blue assay), reactive oxygen species production and vinculin immunofluorescence imaging. The result revealed that cell viability on three-dimensional graphene/polydimethylsiloxane composite increased with increasing culture time and was slightly different from a polystyrene substrate (control). Moreover, cells cultured on three-dimensional graphene/polydimethylsiloxane composite generated less ROS than the control at culture times of 3–6 h. The results of immunofluorescence staining demonstrated that fibroblast cells expressed adhesion protein (vinculin) and adhered well on three-dimensional graphene/polydimethylsiloxane surface. Good cell adhesion could be attributed to suitable surface properties of three-dimensional graphene/polydimethylsiloxane with moderate contact angle and small negative zeta potential in culture solution. The results of electrochemical study by cyclic voltammetry showed that an oxidation current signal with no apparent peak was induced by fibroblast cells and the oxidation current at an oxidation potential of +0.9 V increased linearly with increasing cell number. Therefore, the three-dimensional graphene/polydimethylsiloxane composite exhibits high cytocompatibility and can potentially be used as a conductive substrate for cell-based electrochemical sensing.

Electrocatalytic oxidation behavior of NADH at Pt/Fe3O4/reduced-graphene oxide nanohybrids modified glassy carbon electrode and its determination

We have developed Pt/Fe3O4/reduced-graphene oxide nanohybrids modified glassy carbon (Pt/Fe3O4/RGO/GC) electrode as a novel system for the preparation of electrochemical sensing platform. Characterization of as-made composite was determined using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), atomic force microscopy (AFM) and energy-dispersive analysis of X-ray (EDAX) where the Pt, Fe, Si, O and C elements were observed. The Pt/Fe3O4/RGO/GC electrode was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Due to the synergistic effect between Pt, Fe3O4 and RGO, the nanohybrid exhibited excellent performance toward dihydronicotinamide adenine dinucleotide (NADH) oxidation in 0.1M phosphate buffer solution, pH7.0, with a low detection limit of 5nM.

Graphene scaffolds in progressive nanotechnology/stem cell-based tissue engineering of the nervous system

Although graphene/stem cell-based tissue engineering has recently emerged and has promisingly and progressively been utilized for developing one of the most effective regenerative nanomedicines, it suffers from low differentiation efficiency, low hybridization after transplantation and lack of appropriate scaffolds required in implantations without any degrading in functionality of the cells. In fact, recent studies have demonstrated that the unique properties of graphene can successfully resolve all of these challenges. Among various stem cells, neural stem cells (NSCs) and their neural differentiation on graphene have attracted a lot of interest, because graphene-based neuronal tissue engineering can promisingly realize the regenerative therapy of various incurable neurological diseases/disorders and the fabrication of neuronal networks. Hence, in this review, we further focused on the potential bioapplications of graphene-based nanomaterials for the proliferation and differentiation of NSCs. Then, various stimulation techniques (including electrical, pulsed laser, flash photo, near infrared (NIR), chemical and morphological stimuli) which have recently been implemented in graphene-based stem cell differentiations were reviewed. The possibility of degradation of graphene scaffolds (NIR-assisted photodegradation of three-dimensional graphene nanomesh scaffolds) was also discussed based on the latest achievements. The biocompatibility of graphene scaffolds and their probable toxicities (especially after the disintegration of graphene scaffolds and distribution of its platelets in the body), which is still an important challenge, were reviewed and discussed. Finally, the initial recent efforts for fabrication of neuronal networks on graphene materials were presented. Since there has been no in vivo application of graphene in neuronal regenerative medicine, we hope that this review can excite further and concentrated investigations on in vivo (and even in vitro) neural proliferation, stimulation and differentiation of stem cells on biocompatible graphene scaffolds having the potential of degradability for the generation of implantable neuronal networks.