Quantum engineering of the radiative properties of a nanoscale mesoscopic system

Despite the recent advances in quantum technology, the problem of controlling the light emission properties of quantum emitters used in numerous applications remains: a large spectral width, low intensity, blinking, photodegradation, biocompatibility, etc. In this work, we present the theoretical and experimental investigation of quantum light sources - mesoscopic systems consisting of fluorescent molecules in a thin polydopamine layer coupled with metallic or dielectric nanoparticles. Polydopamines possess many attractive adhesive and optical properties that promise their use as host media for dye molecules. However, numerous attempts to incorporate fluorescent molecules into polydopamines have failed, as polydopamine has been shown to be a very efficient fluorescence quencher through Förster resonance energy transfer and/or photoinduced electron transfer. Using the system as an example, we demonstrate new insights into the interactions between molecules and electromagnetic fields by carefully shaping its energy levels through strong matter-wave coupling of molecules to metallic nanoparticles. We show that the strong coupling effectively suppresses the quenching of fluorescent molecules in polydopamine, opening new possibilities for imaging.

A target-triggered strand displacement-assisted target recycling based on carbon dots-based fluorescent probe and MSNs@PDA nanoparticles for miRNA amplified detection and fluorescence imaging

A target-triggered strand displacement-assisted target recycling based on carbon dots-based fluorescent probe and mesoporous silica nanoparticles@polydopamine (MSNs@PDA) was established to detect miRNA. The surface of MSNs rich in mesopores was coated with a layer of PDA, which can adsorb and quench the fluorescence of single-stranded Fuel DNA with fluorescent carbon dots (CDs) modified at the end through fluorescence resonance energy transfer (FRET). After adding double-stranded DNA-gold nanoparticles (dsDNA-AuNPs) and target let-7a, it will trigger two toehold-mediated strand displacement reactions (TSDR), leading to the recovery of fluorescence and the recycling of target let-7a (excitation wavelength: 380 nm; emission wavelength: 458 nm). The recovery value of fluorescence is proportional to the logarithm of the target microRNA let-7a concentration, thus realizing the sensitivity amplification detection of disease markers. The MSNs@PDA@Fuel DNA-CDs/dsDNA-AuNPs nanoplatform based on the strategy of "on-off-on" and TSDR cyclic amplification may hold great potential as an effective and safe nanoprobe for accurate fluorescence imaging of diseases related to miRNA with low abundances.

Polydopamine functionalized dendritic fibrous silica nanoparticles as a generic platform for nucleic acid-based biosensing

Accurate and rapid detection of nucleic acid sequences is of utmost importance in various fields, including disease monitoring, clinical treatment, gene analysis and drug discovery. In this study, we developed a "turn-on" fluorescence biosensor that enables simple and highly efficient detection of nucleic acid biomarkers. Our approach involves the utilization of 6-carboxyfluorescein modified single-stranded DNA (FAM-ssDNA) as molecular recognition element, along with polydopamine-functionalized dendritic fibrous nanosilica (DFNS). FAM-ssDNA serves as both specific molecular recognition element for the target analyte and reporter capable of transducing a detectable signal through Watson-Crick base pairing. The polydopamine-functionalized DFNS (DFNS@DA) exhibits strong binding to FAM-ssDNA via polyvalent metal mediated coordination leading to effective quenching by fluorescence resonance energy transfer. In the presence of a complementary target sequence, FAM-ssDNA forms hybridized structure and detaches from DFNS@DA, which causes an increased fluorescence emission. The analytical system based on FAM-ssDNA and DFNS@DA demonstrates exceptional sensitivity, selectivity, and rapid response for the detection of nucleic acid sequences, leveraging the high adsorption and quenching properties of DFNS@DA. For the first proof of concept, we demonstrated the successful detection of microRNA (miR-21) in cancer cells using the FAM-ssDNA/DFNS@DA system. Our results highlight the promising capabilities of DFNS@DA and nucleic acid-based biosensors, offering a generic and cost-effective solution for the detection of nucleic acid-related biomarkers.

Mg2+- or Ca2+-regulated aptamer adsorption on polydopamine-coated magnetic nanoparticles for fluorescence detection of ochratoxin A

It has been observed that polyvalent metal ions can mediate the adsorption of DNA on polydopamine (PDA) surfaces. Exploiting this, we used two divalent metal ions (Mg2+ or Ca2+) to promote the adsorption of fluorescence-labelled ochratoxin A (OTA) aptamers on PDA-coated magnetic nanoparticles (Fe3O4@PDA). Based on the different adsorption affinities of free aptamers and OTA-bound aptamers, a facile assay method was established for OTA detection. The aptamers adsorbed on Fe3O4@PDA were removed via simple magnetic separation, and the remaining aptamers in the supernatant exhibited a positive correlation with the OTA concentration. The concentrations of Mg2+ and Ca2+ were finely tuned to attain the optimal adsorption affinity and sensitivity for OTA detection. In addition, other factors, including the Fe3O4@PDA dosage, pH, mixing order, and incubation time, were studied. Finally, under optimized conditions, a detection limit (3σ/s) of 1.26 ng/mL was achieved for OTA. Real samples of spiked red wine were analysed with this aptamer-based method. This is the first report of regulating aptamer adsorption on the PDA surface with polyvalent metal ions for OTA detection. By changing the aptamers, the method can be easily extended to other target analytes.

Enhancing intracellular mRNA precise imaging-guided photothermal therapy with a nucleic acid-based polydopamine nanoprobe

Despite significant advancements in cancer research, real-time monitoring and effective treatment of cancer through non-invasive techniques remain a challenge. Herein, a novel polydopamine (PDA) nucleic acid nanoprobe has been developed for imaging signal amplification of intracellular mRNA and precise photothermal therapy guidance in cancer cells. The PDA nucleic acid nanoprobe (PDA@DNA) is constructed by assembling an aptamer hairpin (H1) labeled with the Cy5 fluorophore and another nucleic acid recognition hairpin (H2) onto PDA nanoparticles (PDA NPs), which have exceptionally high fluorescence quenching ability and excellent photothermal conversion properties. The nanoprobe could facilitate cellular uptake of DNA molecules and their protection from nuclease degradation. Upon recognition and binding to the intracellular mRNA target, a catalytic hairpin assembly (CHA) reaction occurs. The stem of H1 unfolds upon binding, allowing the exposed H1 to hybridize with H2, forming a flat and sturdy DNA double-stranded structure that detaches from the surface of PDA NPs. At the same time, the target mRNA is displaced and engages in a new cyclic reaction, resulting in the recovery and significant amplification of Cy5 fluorescence. Using thymidine kinase1 (TK1) mRNA as a model mRNA, this nanoprobe enables the analysis of TK1 mRNA with a detection limit of 9.34 pM, which is at least two orders of magnitude lower than that of a non-amplifying imaging nucleic acid probe. Moreover, with its outstanding performance for in vitro detection, this nanoprobe excels in precisely imaging tumor cells. Through live-cell TK1 mRNA imaging, it can accurately distinguish between tumor cells and normal cells. Furthermore, when exposed to 808-nm laser irradiation, the nanoprobe fully harnesses exceptional photothermal conversion properties of PDA NPs. This results in a localized temperature increase within tumor cells, which ultimately triggers apoptosis in these tumor cells. The integration of PDA@DNA presents innovative prospects for tumor diagnosis and image-guided tumor therapy, offering the potential for high-precision diagnosis and treatment of tumors.

TiO2 nanorod arrays@PDA/Ag with biomimetic polydopamine as binary mediators for duplex SERS detection of illegal food dyes

Based on TiO2 nanorod arrays@PDA/Ag (TNRs@PDA/Ag), a better surface-enhanced Raman scattering (SERS) sensor with effective enrichment and enhancement was investigated for duplex SERS detection of illicit food dyes. Biomimetic PDA functions as binary mediators by utilizing the structural characteristics of polydopamine (PDA), which include the conjugated structure and abundant hydrophilic groups. One PDA functioned as an electron transfer mediator to enhance the efficiency of electron transfer, and the other as an enrichment mediator to effectively enrich rhodamine B (RhB) and crystal violet (CV) through hydrogen bonding, π-π stacking, and electrostatic interactions. Individual and duplex detection of illicit food dyes (RhB and CV) was performed using TNRs@PDA/Ag to estimate SERS applications. Their linear equations and limits of detection of 1 nM for RhB and 5 nM for CV were derived. Individual and duplex food colour detection was successfully accomplished even in genuine chili meal with good results. The bifunctional TNRs@PDA/Ag-based highly sensitive and duplex SERS dye detection will have enormous potential for food safety monitoring.

Free-electron Ramsey-type interferometry for enhanced amplitude and phase imaging of nearfields

The complex range of interactions between electrons and electromagnetic fields gave rise to countless scientific and technological advances. A prime example is photon-induced nearfield electron microscopy (PINEM), enabling the detection of confined electric fields in illuminated nanostructures with unprecedented spatial resolution. However, PINEM is limited by its dependence on strong fields, making it unsuitable for sensitive samples, and its inability to resolve complex phasor information. Here, we leverage the nonlinear, overconstrained nature of PINEM to present an algorithmic microscopy approach, achieving far superior nearfield imaging capabilities. Our algorithm relies on free-electron Ramsey-type interferometry to produce orders-of-magnitude improvement in sensitivity and ambiguity-immune nearfield phase reconstruction, both of which are optimal when the electron exhibits a fully quantum behavior. Our results demonstrate the potential of combining algorithmic approaches with state-of-the-art modalities in electron microscopy and may lead to various applications from imaging sensitive biological samples to performing full-field tomography of confined light.

Constraint Coupling of Redox Cascade and Electron Transfer Synchronization on Electrode-Nanosensor Interface for Repeatable Detection of Tumor Biomarkers

Quantitative analysis of up-regulated biomarkers in pathological tissues is helpful to tumor surgery yet the loss of biomarker extraction and time-consuming operation limited the accurate and quick judgement in preoperative or intraoperative diagnosis. Herein, an immobilization-free electrochemical sensing platform is developed by constraint coupling of electron transfer cascade on electrode-nanosensor interface. Specifically, electrochemical indicator (Ri)-labeled single-stranded DNA on electroactive nanodonor (polydopamine, PDA) can be responsively detached by formation of DNA complex through the recognition and binding with targets. By applying the oxidation potential of Ri, nanosensor collisions on electrode surface trigger a cascade redox cycling of PDA and Ri through synchronous electron transfer, which boost the amplification of current signal output. The developed nanosensor exhibit excellent linear response toward up-regulated biomarkers (miRNA-21, ATP, and VEGF) with low detection limits (32 fM, 386 pM, and 2.8 pM). Moreover, background influence from physiological interferent is greatly reduced by restricted electron transfer coupling on electrode. The practical applicability is illustrated in sensitive and highly repeatable profiling of miRNA-21 in lysate of tumor cells and tumor tissue, beneficial for more reliable diagnosis. This electrochemical platform by employing electron transfer cascades at heterogeneous interfaces offers a route to anti-interference detection of biomarkers in tumor tissues.

Polydopamine nanomaterials and their potential applications in the treatment of autoimmune diseases

The conventional treatment methods used for the management of autoimmune diseases (ADs) have limited efficacy and also exhibit significant side effects. Thus, identification of novel strategies to improve the efficacy and safety of ADs treatment is urgently required. Overactivated immune response and oxidative stress are common characteristics associated with ADs. Polydopamine (PDA), as a polymer material with good antioxidant and photothermal conversion properties, has displayed useful application potential against ADs. In addition, PDA possesses good biosafety, simple preparation, and easy functionalization, which is conducive for the pharmacological development of PDA nanomaterials with clinical transformation prospects. Here, we have first reviewed the preparation of PDA, the different functional integration strategies of PDA-based biomaterials, and their potential applications in ADs. Next, the mechanism of action of PDA in ADs has been elaborated in detail. Finally, the application opportunities and challenges linked with PDA nanomaterials for ADs treatment are discussed. This review is contributed to design reasonable and effective PDA nanomaterials for the diagnosis and treatment of ADs.

Polydopamine-Based Nanoprobes Application in Optical Biosensing

Polydopamine (PDA), the synthetic counterpart of melanin, is a widely investigated bio-inspired material for its chemical and photophysical properties, and in the last few years, bio-application of PDA and PDA-based materials have had a dramatic increase. In this review, we described PDA application in optical biosensing, exploring its multiple roles as a nanomaterial. In optical sensing, PDA can not only be used for its intrinsic fluorescent and photoacoustic properties as a probe: in some cases, a sample optical signal can be derived by melanin generation in situ or it can be enhanced in another material thanks to PDA modification. The various possibilities of PDA use coupled with its biocompatibility will indeed widen even more its application in optical bioimaging.

Dopamine-Mediated Biopolymer Multilayer Coatings for Modulating Cell Behavior, Lubrication, and Drug Release

Biopolymer coatings on implants mediate the interactions between the synthetic material and its biological environment. Owing to its ease of preparation and the possibility to incorporate other bioactive molecules, layer-by-layer deposition is a method commonly used in the construction of biopolymer multilayers. However, this method typically requires at least two types of oppositely charged biopolymers, thus limiting the range of macromolecular options by excluding uncharged biopolymers. Here, we present a layer-by-layer approach that employs mussel-inspired polydopamine as the adhesive intermediate layer to build biopolymer multilayer coatings without requiring any additional chemical modifications. We select three biopolymers with different charge states─anionic alginate, neutral dextran, and cationic polylysine─and successfully assemble them into mono-, double-, or triple-layers. Our results demonstrate that both the layer number and the polymer type modulate the coating properties. Overall, increasing the number of layers in the coatings leads to reduced cell attachment, lower friction, and higher drug loading capacity but does not alter the surface potential. Moreover, varying the biopolymer type affects the surface potential, macrophage differentiation, lubrication performance, and drug release behavior. This proof-of-concept study offers a straightforward and universal coating method, which may broaden the use of multilayer coatings in biomedical applications.

Preparation of Ultrathin and Degradable Polymeric Films by Electropolymerization of 3-Amino-l-tyrosine

Bioderived polymers are one of many current research areas that promise a sustainable future. Due to their unique properties, the bioderived polymer polydopamine has been in the spotlight over the last decades. Its ability to adhere to virtually any surface and its stability over a wide pH range as well as in several organic solvents make it a suitable candidate for various applications like coatings and biosensors. However, strong light absorption over a broad range of wavelengths and high quenching efficiency limit its uses. Therefore, new bioderived polymers with similar features to polydopamine but without fluorescence quenching properties are highly desirable. Herein, the electropolymerization of a bioderived analog of dopamine, 3-amino-l-tyrosine, is demonstrated. The resulting polymer, poly(amino-l-tyrosine), exhibits several characteristics complementary to or even exceeding those of polydopamine and its analog, polynorepinephrine, rendering poly(amino-l-tyrosine) attractive for the development of sensors and photoactive devices. Cyclic voltammetry, spectro-electrochemistry, and electrochemical quartz crystal microbalance measurements are applied to study the electrodeposition of this material, and the resulting films are compared to polydopamine and polynorepinephrine. Impedance spectroscopy reveals increased ion permeability of poly(amino-l-tyrosine) compared to polydopamine and polynorepinephrine. Moreover, the reduced fluorescence quenching of poly(amino-l-tyrosine) supports its use as coating for biosensors and organic semiconductors.

Phase-Controlled Ruthenium Nanocrystals on Colloidal Polydopamine Supports and Their Catalytic Behaviors in Aerobic Oxidation Reactions

The past decade has witnessed rapidly growing interest in noble metal nanostructures adopting unconventional metastable crystal phases. In the case of Ru, chemically synthesized nanocrystals typically form thermodynamically favored hexagonal close-packed (hcp) crystal lattices, whereas it remains significantly more challenging to synthesize Ru nanocrystals in the metastable face-centered cubic (fcc) phase. In this work, we have synthesized polydopamine (PDA)-supported hcp and fcc Ru nanocrystals in a phase-selective manner through one-pot thermal reduction of appropriate Ru(III) precursors in a polyol solvent. Benefiting from the unique surface-adhesion function of PDA, we have been able to grow phase-controlled sub-5 nm Ru nanocrystals directly on colloidal PDA supports without prefunctionalizing the particle surfaces with any molecular linkers or surface-capping ligands. Success in phase-controlled synthesis of capping ligand-free Ru nanocrystals dispersed on the same support material enables us to systematically compare the intrinsic mass-specific and surface-specific activities of fcc and hcp Ru nanocatalysts toward the aerobic oxidation of a chromogenic molecular substrate, 3,3',5,5'-tetramethylbenzidine (TMB), under a broad range of reaction conditions. We use UV-vis absorption spectroscopy to monitor the conversion of the reactant molecules into the one-electron and two-electron oxidation products in real time during Ru-catalyzed oxidation of TMB, which is found to be a mechanistically complex molecule-transforming process involving multiple elementary steps. The apparent reaction rates and detailed kinetic features are observed to be not only intimately related to the crystalline structures of the Ru nanocatalysts but also profoundly influenced by several other critical factors, such as the pH of the reaction medium, the initial concentration of TMB, Ru coverage on the PDA supports, and degree of nanoparticle aggregation.

Mesoporous Polydopamine-Encapsulated Fluorescent Nanodiamonds: A Versatile Platform for Biomedical Applications

Fluorescent nanodiamonds (FNDs) are versatile nanomaterials with promising properties. However, efficient functionalization of FNDs for biomedical applications remains challenging. In this study, we demonstrate mesoporous polydopamine (mPDA) encapsulation of FNDs. The mPDA shell is generated by sequential formation of micelles via self-assembly of Pluronic F127 (F127) with 1,3,5-trimethyl benzene (TMB) and composite micelles via oxidation and self-polymerization of dopamine hydrochloride (DA). The surface of the mPDA shell can be readily functionalized with thiol-terminated methoxy polyethylene glycol (mPEG-SH), hyperbranched polyglycerol (HPG), and d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS). The PEGylated FND@mPDA particles are efficiently taken up by, and employed as a fluorescent imaging probe for, HeLa cells. HPG-functionalized FND@mPDA is conjugated with an amino-terminated oligonucleotide to detect microRNA via hybridization. Finally, the increased surface area of the mPDA shell permits efficient loading of doxorubicin hydrochloride. Further modification with TPGS increases drug delivery efficiency, resulting in high toxicity to cancer cells.

Composite microgranular scaffolds with surface modifications for improved initial osteoblastic cell proliferation

Polyester-based granular scaffolds are a potent material for tissue engineering due to their porosity, controllable pore size, and potential to be molded into various shapes. Additionally, they can be produced as composite materials, e.g., mixed with osteoconductive β-tricalcium phosphate or hydroxyapatite. Such polymer-based composite materials often happen to be hydrophobic, which disrupts cell attachment and decreases cell growth on the scaffold, undermining its primary function. In this work, we propose the experimental comparison of three modification techniques for granular scaffolds to increase their hydrophilicity and cell attachment. Those techniques include atmospheric plasma treatment, polydopamine coating, and polynorepinephrine coating. Composite polymer/β-tricalcium phosphate granules have been produced in a solution-induced phase separation (SIPS) process using commercially available biomedical polymers: poly(lactic acid), poly(lactic-co-glycolic acid), and polycaprolactone. We used thermal assembly to prepare cylindrical scaffolds from composite microgranules. Atmospheric plasma treatment, polydopamine coating, and polynorepinephrine coating showed similar effects on polymer composites' hydrophilic and bioactive properties. All modifications significantly increased human osteosarcoma MG-63 cell adhesion and proliferation in vitro compared to cells cultured on unmodified materials. In the case of polycaprolactone/β-tricalcium phosphate scaffolds, modifications were the most necessary, as unmodified polycaprolactone-based material disrupted the cell attachment. Modified polylactide/β-tricalcium phosphate scaffold supported excellent cell growth and showed ultimate compressive strength exceeding this of human trabecular bone. This suggests that all investigated modification techniques can be used interchangeably for increasing wettability and cell attachment properties of various scaffolds for medical applications, especially those with high surface and volumetric porosity, like granular scaffolds.

Surface modification for improving immunoassay sensitivity

Immunoassays are widely performed in many fields such as biomarker discovery, proteomics, drug development, and clinical diagnosis. There is a growing need for high sensitivity of immunoassays to detect low abundance analytes. As a result, great effort has been made to improve the quality of surfaces, on which the immunoassay is performed. In this review article, we summarize the recent progress in surface modification strategies for improving the sensitivity of immunoassays. The surface modification strategies can be categorized into two groups: antifouling coatings to reduce background noise and nanostructured surfaces to amplify the signals. The first part of the review summarizes the common antifouling coating techniques to prevent nonspecific binding and reduce background noise. The techniques include hydrophilic polymer based self-assembled monomers, polymer brushes, and surface attached hydrogels, and omniphobicity based perfluorinated surfaces. In the second part, some common nanostructured surfaces to amplify the specific detection signals are introduced, including nanoparticle functionalized surfaces, two dimensional (2D) nanoarrays, and 2D nanomaterial coatings. The third part discusses the surface modification techniques for digital immunoassays. In the end, the challenges and the future perspectives of the surface modification techniques for immunoassays are presented.

An immobilization-free electrochemical aptamer-based assay for zearalenone based on target-triggered dissociation of DNA from polydopamine nanospheres with strand displacement amplification

Zearalenone (ZEN), a widespread mycotoxin, can cause great harm to people's health. In order to assay ZEN, an immobilization-free electrochemical sensor has been developed. A multifunctional hairpin DNA has been carefully designed, including three functions: the aptamer for zearalenone (ZEN), primer, and template sequence. This hairpin DNA can anchor on polydopamine nanospheres (PDANSs), which can protect DNA against the digestion of enzymes and prevent the occurrence of strand displacement amplification (SDA). In the presence of ZEN, the hairpin DNA is dissociated from PDANSs due to the interaction between ZEN and the aptamer, and the SDA reaction is initiated with the help of endonuclease and polymerase. During the SDA process, substantial amounts of negatively charged dsDNA are generated. The MB molecules are embedded into the dsDNA grooves to obtain the complex with a negative charge. The confined MB is repelled on the surface of the negatively charged ITO electrode, leading to the decline of the current. This immobilization-free method possesses high sensitivity (LOD of 0.18 pg mL^-1) and good selectivity and can be applied to assay ZEN in corn flour.

Dual nucleases-assisted cyclic amplification using polydopamine nanospheres-based biosensors for one-pot detection of microRNAs

The accurate detection of microRNAs (miRNAs) is essential in the early diagnosis and treatment of cancers. Existing miRNA detection methods represented by nucleic acid amplification (NAA) techniques, such as qRT-PCR, suffer from the small size of miRNAs and lead to limited practicability. CRISPR Cas13a system, another valuable toolbox for nucleic acid detection, relies heavily on the behaviors of accompanying isothermal NAA techniques, which prompts similar deficiencies in miRNA detection. In this study, a dual nucleases-assisted cyclic amplification (DUNCAN) strategy has been established to replace NAA techniques for one-pot detection of miRNAs. The DUNCAN strategy contained an initial reaction based on CRISPR Cas13a for target recognition, and an accompanied cyclic reaction using DNA probes protected by polydopamine nanospheres (PDANSs) for signal amplification and result readout. Exemplified by miR-19b, which has been confirmed to be related to several tumors, the quantitative detection through the DUNCAN strategy was achieved in the dynamic range of 10-10⁶ fM, with a calculated detection limit of 1.27 fM. Besides, the DUNCAN strategy presented well selectivity and anti-interference performance for accurate detection of miR-19b in complex miRNA mixtures, different cell lines and clinical samples compared with qRT-PCR. All these performances demonstrated the promising potential of the DUNCAN strategy in clinical miRNA detection and diagnosis.

Plant-Derived Polyphenol and LL-37 Peptide-Modified Nanofibrous Scaffolds for Promotion of Antibacterial Activity, Anti-Inflammation, and Type-H Vascularized Bone Regeneration

The regeneration of oral tissues is a challenging clinical problem because of the complex microbial and biological stress environments. Electrospun fibrous scaffolds have attracted significant interest as effective barrier membranes for guided bone regeneration (GBR); however, no mature strategy yet exists for the surface modification of fibers to provide versatility to satisfy clinical requirements. This study demonstrated a practical biosafety strategy: the combined use of plant polyphenols and LL-37 peptides to modify the fiber surface to endow the fibrous scaffold with antimicrobial activity, immunoregulation, and vascularized bone regeneration. We confirmed that the LL-37 peptides interacted with tannic acid (TA) through noncovalent bonds through experiments and molecular docking simulation analysis. In vitro experiments showed that the TA coating imparted strong antibacterial properties to the fibrous scaffold, but it also caused cytotoxicity. The grafting of LL-37 peptide promoted the spreading, migration, and osteogenic differentiation of mesenchymal stem cells and was also conducive to the M2 polarization of RAW264.7 cells. In vivo experiments further verified that the LL-37 peptide-grafted fibrous scaffold significantly enhanced angiogenesis, anti-inflammatory effects, and type-H vascularized bone regeneration. Overall, the fibrous scaffold modified by the LL-37 peptide through TA grafting has significant potential for GBR applications.

Application of a Dual-Probe Coloading Nanodetection System in the Process Monitoring and Efficacy Assessment of Photodynamic Therapy: An In Vitro Study

The oxygen-consuming property of photodynamic therapy (PDT) affects its effects and aggravates tumor hypoxia, thus upregulating the vascular endothelial growth factor (VEGF) to exacerbate tumor metastasis and lead to treatment failure. Therefore, it is necessary to monitor the dynamic changes in the factors related to PDT and tumor development trends in real time, thus helping to improve PDT efficiency. This study fabricated a fluorescent probe, TPE-2HPro, and a fluorescein-labeled aptamer probe, FAM-Aptamer_VEGF, to detect hydrogen peroxide (H₂O₂) and VEGF through the photoinduced electron-transfer effect and the specific affinity of the aptamer to VEGF, respectively. The two probes were loaded into the inner pores and absorbed on the surface of polydopamine coating-wrapped mesoporous silica nanoparticles (MSN@PDA) to construct the dual-probe-loaded system, MSN_TH@PDA_Apt, which was kept stable in fetal bovine serum (FBS) solution and achieved pH-responsive release behavior, thus helping to increase the accumulation of the two probes in tumor cells. The dichloroacetic acid-mediated in vitro antitumor tests showed that the changing trends of H₂O₂ and VEGF levels were consistent with the results of related mechanism studies and could be monitored by MSN_TH@PDA_Apt. The in vitro chlorin e6 (Ce6)-mediated PDT treatment demonstrated that when the illumination condition was 650 nm, 50 mW/cm² for 10 min, cells were more inclined to metastasis and invasion rather than death due to a substantial increase in VEGF expression at the low Ce6 concentrations. With the increase of the Ce6 concentration, the growth of the H₂O₂ level gradually exceeded that of VEGF, and the reactive oxygen species (ROS)-mediated cell death dominated when the Ce6 concentration was about 2 times its IC₅₀ values. Besides, hypoxia also affected the H₂O₂ and VEGF changes. These results demonstrated that MSN_TH@PDA_Apt could precisely monitor and assess the tumor development trends during PDT treatment, thus helping improve the treatment effect.

Polydopamine-Engineered Theranostic Nanoscouts Enabling Intracellular HSP90 mRNAs Fluorescence Detection for Imaging-Guided Chemo-Photothermal Therapy

The combination of photothermal therapy (PTT) and chemotherapy is considered a promising tumor treatment modality, nevertheless, cellular resistance induced by heat shock proteins (HSPs) overexpressed in tumor cells will restrict the therapeutic effect. Herein, a multifunctional nanobeacon DOX/HCuS@PDA-MB (D/CP-MB) with a scout function for HSP90 mRNA fluorescence detection and near-infrared (NIR) triggered drug release for sensitizing chemo-photothermal therapy, is proposed. In the theranostic nanobeacons, HSP90MBs not only enable fluorescence detection of intracellular HSP90 mRNAs, but also downregulate the expression of HSP90 to reduce cell resistance. With the assistance of NIR and guidance of fluorescence imaging, spatiotemporal doxorubicin release can be achieved by the trigger of the photothermal effect, allowing for combined chemotherapy and photothermal treatment. Furthermore, the dual photothermal effect of hollow mesoporous CuS (HCuS) and polydopamine will lead to a better photothermal effect. Moreover, compared with other control groups, D/CP-MB nanobeacons exhibit effective boost therapeutic efficacy by inducing significant suppression of tumor proliferation and enhancement of apoptosis both in vitro and in vivo. In summary, this work provides novel theranostic nanobeacons that integrate imaging and therapy in a single nanoparticle, this strategy of imaging-guided therapy can enable precise tumor treatment and effectively improve tumor treatment efficacy.

PDA-PEI-Copolymerized Nanodots with Tailorable Fluorescence Emission and Quenching Properties for the Sensitive Ratiometric Fluorescence Sensing of miRNA in Serum

Dopamine and polyethyleneimine (PEI) copolymerized nanodots (PDA-PEI nanodots) with both fluorescence emission and quenching features were synthesized by a simple one-step reaction at room temperature. By adjusting the dopamine and PEI ratio as well as the chain length of PEI, the fluorescence emission and quenching properties of PDA-PEI nanodots can be controlled well. Under optimal conditions, the nanodots showed strong green fluorescence emission with an absolute quantum yield of 1-2% and a quenching efficiency of more than 99% to several fluorophores with emission wavelengths ranging from blue to red light regions. The nanodots with a large number of functional groups also showed strong affinity to nucleic acid strands, excellent solubility in aqueous solution, long-term stability, and uniform size distribution. Integrating these attractive features with the specific enzymatic digestion reaction of the DSN enzyme, a highly sensitive ratiometric fluorescence nanoprobe for miRNA analysis was developed. Aminomethylcoumarin acetate (AMCA), which possesses the same excitation wavelength but a well-resolved blue fluorescence emission with PDA-PEI nanodots, was selected as the signal-reporting unit for capture probe labeling, while the inherent green fluorescence of PDA-PEI nanodots served as the reference. According to the ratiometric fluorescence signal, the ratiometric fluorescence nanoprobes showed high sensitivity and good accuracy for the miRNA assay. Because of the high and universal quenching efficiency, stable fluorescence emission, easily assembled interface, and uniform morphology, the nanodots may have great application prospects to serve as a universal nanoplatform for the fabrication of ratiometric fluorescence nanoprobes.

Interfacially responsive electron transfer and matter conversion by polydopamine-mediated nanoplatforms for advancing disease theranostics

Polydopamine (PDA) is an artificial melanin polymer that has been spotlighted due to its extraordinary optoelectronic characteristics and advance theranosctic applications in biomaterial fields. Moreover, interactions on the nano-bio interface interplay whereby substances exchange in response to endogenous or exogenous stimuli, and electron transfer driven by light, energy-level transitions, or electric field greatly affect the functional performance of PDA-modified nanoparticles. The full utilization of potential in PDA's interfacial activities, optoelectrical properties and related responsiveness is therefore an attractive means to construct advanced nanostructures for regulating biological processes and metabolic pathways. Herein, we strive to summarize recent advances in the construction of functional PDA-based nanomaterials with state-of-the-art architectures prepared for modulation of photoelectric sensing and redox reversibility, as well as manipulation of photo-activated therapeutics. Meanwhile, contributions of interfacial electron transfer and matter conversion are highlighted by discussing the structure-property-function relationships and the biological effects in their featured applications including disease theranostics, antibacterial activities, tissue repair, and combined therapy. Finally, the current challenges and future perspectives in this emerging research field will also be outlined. Recent advances on polydopamine-based nanotherapeutics with an emphasis on their interfacial activities, optoelectrical properties and related responsiveness are reviewed for providing insightful guidance to the rational design of integrated theranostic nanoplatforms with high performance in the biomedical fields. This article is categorized under: Diagnostic Tools > Diagnostic Nanodevices Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.

Visualizing MiRNA Regulation of Apoptosis for Investigating the Feasibility of MiRNA-Targeted Therapy Using a Fluorescent Nanoprobe

MiRNA-targeted therapy is an active research field in precision cancer therapy. Studying the effect of miRNA expression changes on apoptosis is important for evaluating miRNA-targeted therapy and realizing personalized precision therapy for cancer patients. Here, a new fluorescent nanoprobe was designed for the simultaneous imaging of miRNA-21 and apoptotic protein caspase-3 in cancer cells by using gold nanoparticles as the core and polydopamine as the shell. Confocal imaging indicated that the nanoprobe could be successfully applied for in situ monitoring of miRNA regulation of apoptosis. This design strategy is critical for investigating the feasibility of miRNA-targeted therapy, screening new anti-cancer drugs targeting miRNA, and developing personalized treatment plans.

Long-term continuous monitoring of microRNA in living cells using modified gold nanoprobe

Long-term and continuous monitoring of the microRNA (miRNA) expression in living cells is essential in biomedical research, but it is currently limited by fast consumption and easy digestion of probes in the intracellular environment. Herein, we report polydopamine-modified gold nanoparticles (AuNPs@PDA) as protective and efficient nanocarriers for DNA hairpin probes (hpDNA), achieving long-term monitoring (48 h) of the miRNA (let-7a) levels in living cells after drug treatments. This method enabled excellent sensitivity and high selectivity toward let-7a with a limit of detection of 0.51 nM (n = 3) and a linear range from 1 to 100 nM. More importantly, AuNPs@PDA can not only efficiently improve the loading of hpDNA on each nanoparticle, but also effectively protect hpDNA from hydrolysis in the cell microenvironment, finally realizing the continuous monitoring of let-7a in living cells for 48 h. This simple method would be of great significance for drug screening and precision medicine.

Construction of Double-Shelled Hollow Ag2S@Polydopamine Nanocomposites for Fluorescence-Guided, Dual Stimuli-Responsive Drug Delivery and Photothermal Therapy

The design and preparation of multifunctional drug carriers for combined photothermal–chemotherapy of cancer have attracted extensive attention over the past few decades. However, the development of simple-structured stimuli-responsive theranostic agents as both photothermal agents and chemotherapeutic agents remains a big challenge. Herein, a novel double-shelled nanocarrier composed of hollow Ag₂S (HAg₂S) nanospheres and a mesoporous polydopamine (MPDA) exterior shell was fabricated through a facile process. Notably, HAg₂S possesses both fluorescence and photothermal properties. MPDA acts as a drug carrier and photothermal agent. Meanwhile, the cavity structure between HAg₂S and MPDA provides more space for drug loading. The nanocarrier presents a high drug loading rate of 23.4%. It exhibits an apparent pH-responsive DOX release property due to the acidic sensitivity of PDA. In addition, the release of DOX is promoted under NIR irradiation, which is attributed to the heating action generated by the photothermal effect of HAg₂S and MPDA. The cytotoxicity test shows that the nanocarriers possess good biocompatibility. Compared with single photothermal therapy or chemotherapy, the combined treatment represents a synergistic effect with higher therapeutic efficacy. In addition, the nanocarriers exhibit excellent fluorescence imaging capability and can target HepG2 cells. These simple-structured smart nanocarriers have a great potential for fluorescence-mediated combination cancer therapy.

Synthesis of Fluorescent Titanium Nanoclusters at ambient temperature for highly sensitive and selective detection of Creatine Kinase MM in myocardial infarction

Fluorescent-based biosensing in Photoluminescence nanomaterials has emerged as a new sensing platform commonly used for disease diagnosis. However, the synthesis of Titanium nanoclusters is highly challenging since Titanium is easily oxidized into TiO₂ at ambient temperature. To overcome this problem, we used an acidic medium and simple and robust protocol to synthesize the Titanium nanoclusters of 3-4 nm diameter, which could report the first fluorescent Titanium nanoclusters. New approaches for the novel synthesis of TiNCs can be used for rapid sensing of myocardial infarction (cardiac arrest). In converting creatine to phosphocreatine, CK-MM activates the reaction to convert ATP to ADP, thereby releasing the phosphate groups. Titanium nanoclusters bind strongly to the phosphate group and then quench the Fluorescence. Thus, this phenomenon can be further applied for quantification approaches. The quenching of fluorescence intensity with CK-MM concentration is linear with R² = 0.9829. The current approach can be applied for CK-MM sensing for a wide concentration range (0.625 U/L - 10 U/L). The detection limit was 0.2513 ng/ml in aqueous medium and 0.3465 ng/ml in human serum with high sensitivity when compared with the previous reported methods. Also, this is the first fluorescent-based sensing method to detect CK- MM. The fluorescent TiNCs is a novel platform to be widely applied for the phosphopeptide and phosphoprotein analysis due to the strong and covalent bondings between Ti with P atoms in the near future in medicine, biomedicine, and biological fields.

Modification-Free Fluorescent Biosensor for CEA Based on Polydopamine-Coated Upconversion Nanoparticles

Upconversion nanoparticles (UCNPs) have achieved considerable success in protein sensing in vitro. And aptamer is one of the most frequently used biomolecules to modify the nanoparticles for protein assay. However, the complicated process of modifying UCNPs with DNA and the susceptibility of the phosphate groups of DNA backbone to adsorb on the surface of UCNPs have limited their practical applications. To overcome these limitations, a modification-free fluorescent biosensor based on polydopamine-coated upconversion nanoparticles (UCNPs@PDA) is proposed. It consists of UCNPs@PDA and CEA aptamer-functionalized AuNPs (AuNPs-CEA aptamer). The CEA aptamer on AuNPs can be adsorbed onto the surface of UCNPs@PDA due to the interactions of π-π stacking and hydrogen bonding, triggering the process of fluorescence resonance energy transfer (FRET) from UCNPs@PDA to AuNPs-CEA aptamer. In the presence of CEA, the AuNPs-CEA aptamer departs from UCNPs@PDA due to the stronger affinity of CEA with its aptamer. Therefore, the recovery of upconversion fluorescence can sensitively quantify the concentration of CEA. This biosensor provides a linear range from 0.1 to 100 ng/mL for CEA with a LOD of 0.031 ng/mL in an aqueous solution. In spiked human serum samples, the same linear range is acquired with a slightly higher LOD of 0.055 ng/mL, demonstrating the great potential of the biosensor in practical application.

Back to the Drawing Board: A Unifying First-Principle Model for Correlating Sample UV-Vis Absorption and Fluorescence Emission

The popular textbook and literature model I(λ_x,λ_m) = K(λx,λm)(1-10-Ax) or its variants for correlating the sample absorption and fluorescence often fails even for the simplest samples where the fluorophore is the only light absorber. Reported is a first-principle model I(λ_x,λ_m) = K(λx,λm)Ax,f10-(Ax,sdx+Am,sdm) for correlating the sample fluorescence measured with a conventional spectrofluorometer and its UV-vis absorbance quantified with a conventional UV-vis spectrophotometer. This model can be simplified or expanded for a variety of fluorescence analyses. First, it enables curve-fitting fluorescence intensity as a function of the fluorophore or sample absorbance over a sample concentration range impossible with existing models. Second, it provides the theoretical foundation for an inner-filter-effect (IFE)-correction method developed earlier and explains mathematically the linearity between the IFE-corrected fluorescence and the fluorophore concentration or absorbance. Third, this model can be expanded for quantitative mechanistic studies of fluorescence intensity variations triggered by stimuli treatments. One demonstrated example is to quantify temperature effects on the emission-wavelength-specific and total fluorescence quantum yield of anthracene. We expect that this first-principle model will be broadly adopted for both student education that promotes evidence-based learning and a variety of fluorescence applications where disentangling sample absorption and emission are critical for reliable data analysis.

Colloidal Polydopamine Beads: A Photothermally Active Support for Noble Metal Nanocatalysts

Polydopamine (PDA) is a unique bioinspired synthetic polymer that integrates broadband light absorption, efficient photothermal transduction, and versatile surface-adhesion functions in a single material entity. Here, we utilize colloidal PDA beads in the submicron particle size regime as an easily processable and photothermally active support for sub-10 nm Pd nanocatalysts to construct a multifunctional material system that allows us to kinetically boost thermal catalytic reactions through visible and near-infrared light illuminations. Choosing the Pd-catalyzed nitrophenol reduction by ammonium formate as a model transfer hydrogenation reaction exhibiting temperature-dependent reaction rates, we demonstrate that interfacial molecule-transforming processes on metal nanocatalyst surfaces can be kinetically modulated by harnessing the thermal energy produced through photothermal transduction in the PDA supports.

Ligand-free sub-5 nm platinum nanocatalysts on polydopamine supports: size-controlled synthesis and size-dictated reaction pathway selection

Noble metal nanoparticles exhibit intriguing size-dependent catalytic activities toward a plethora of important chemical reactions. A particularly interesting but rarely explored scenario is that some catalytic molecule-transforming processes may even inter-switch among multiple reaction pathways when the dimensions of a metal nanocatalyst are deliberately tuned within specific size windows. Here, we take full advantage of the adhesive surface properties of polydopamine to kinetically maneuver the surface-mediated nucleation and growth of Pt nanocrystals, which enables us to synthesize polydopamine-supported sub-5 nm Pt nanocatalysts with precisely tunable particle sizes, narrow size distributions, ligand-free clean surfaces, and uniform dispersion over the supports. The success in precisely tuning the particle size of ligand-free Pt nanocatalysts within the sub-5 nm size window provides unique opportunities for us to gain detailed, quantitative insights concerning the intrinsic particle size effects on the pathway selection of catalytic molecular transformations. As exemplified by Pt-catalyzed nitrophenol reduction by ammonia borane, catalytic transfer hydrogenation reactions may inter-switch between two fundamentally distinct bimolecular reaction pathways, specifically the Langmuir-Hinshelwood and the Eley-Rideal mechanisms, as the size of the Pt nanocatalysts varies in the sub-5 nm regime.

Lateral flow immunoassay based on dual spectral-overlapped fluorescence quenching of polydopamine nanospheres for sensitive detection of sulfamethazine

Herein, we propose a lateral flow immunoassay (LFIA) based on the dual spectral-overlapped fluorescence quenching of polydopamine nanospheres (PDANs) caused by the inner filter effect to sensitively detect sulfamethazine (SMZ). The fluorescence quenching LFIA device consists of four parts: absorbent pad, polyvinyl chloride pad, sample pad, and nitrocellulose membrane. Compared with traditional quenchers such as gold nanoparticles (AuNPs) with single spectral-overlapped quenching ability, PDANs can quench the excitation light and emission light of three fluorescence donors (aggregation-induced emission fluorescent microsphere, AIEFM; fluorescent microsphere, FM; and quantum dot bead, QB). The fluorescence intensity changes (ΔF) are numerically larger for PDANs-LFIA (ΔF_AIEFM = 2315, ΔF_FM = 979, ΔF_QB = 910) than those for AuNPs-LFIA (ΔF_AIEFM = 1722, ΔF_FM = 833, ΔF_QB =;520). AIEFM-based PDANs-LFIA exhibits a large ΔF (2315) in response to the changes in the SMZ concentration, and produces a high signal-to-noise ratio. The limit of detection (LOD) and visual LOD of LFIA based on PDANs quenching AIEFM for the detection of SMZ in chicken are 0.043 and 0.5 ng/mL, respectively. The results confirm that the proposed method can be used for the detection of hazardous materials in practical applications.

A versatile fluorescent nanobeacon lighted by DNA-templated copper nanoparticles and the application in isothermal amplification detection

In this work, an environmentally-friendly and versatile nanobeacon was constructed by utilizing DNA-templated copper nanoparticles (CuNPs) as fluorescence signal source. As the key component of the nanobeacon, a hairpin DNA was designed to contain four segments: two segments for CuNPs template sequence, a target recognition segment and a blocking segment. At room temperature, the target recognition segment partly hybridizes with the blocking segment and thus prohibits the formation of double stranded DNA template, so that no CuNPs can be generated on the hairpin DNA. While a target is introduced, the specific binding of target with recognition sequence triggers off the conformational transformation of the hairpin DNA, which contributes to the formation of the CuNPs template. As a result, the in-situ generation of CuNPs gives birth to the fluorescence signal readout that can be used to identify the target. By reasonably varying the recognition sequence within hairpin DNA, a series of nanobeacons in response to corresponding targets, such as DNA, microRNA, thrombin, and ATP, were put forward with satisfactory sensitivity and selectivity. Moreover, this nanobeacon was also integrated with the strategy of enzyme-assisted target-recycling to realize signal amplification and ultrasensitive detection, which further demonstrated the versatility of the nanobeacon. This novel nanobeacon is expected to be a promising alternative to classical dye-labeled molecular beacon and provide new perspective on ultrasensitive fluorescence sensing.

Polydopamine-based nanoplatform for photothermal ablation with long-term immune activation against melanoma and its recurrence

The high risk of tumor recurrence presents a big challenge in melanoma therapy. Photothermal therapy (PTT) has merged as a powerful weapon against tumor in recent years, which produces tumor-associated antigens (TAA) and recruits dendritic cells (DCs) to tumor sites through immunogenic cell death (ICD) for immune activation. However, due to the lack of activation signals of DCs, the immune effect induced by PTT is not sufficient to inhibit the recurrence and proliferation of tumor. To efficiently cooperate PTT and immunotherapy to circumvent tumor recurrence, here we constructed a polydopamine (PDA) based core-shell nanoplatform loading CpG ODNs to elicit robust photothermal ablation and antitumor immune responses. Cationized polydopamine coated with hyaluronic acid (HA) shell was proven an efficient photothermal agent that increased the surface temperature of tumor by 16 °C and induced ICD. CpG ODNs effectively induced maturation of DCs by elevating the expression of co-stimulating markers. PTT combined with CpG ODNs achieved a remarkable synergistic treatment effect in the maturation of DCs and activation of T cells in melanoma-bearing mice model compared with PTT or CpG ODNs alone. Furthermore, in a tumor recurrence model, photothermal-immune combination therapy increased the infiltration of CTLs in distant tumor compared with PTT or CpG ODNs alone. The combination therapy overcame insufficient immunity at distant tumor caused by PTT alone and relieved immunosuppression microenvironment of the tumor. Hence, the PDA based core-shell nanoplatform presents a potent photo-immunotherapy against proliferation and recurrence of melanoma. STATEMENT OF SIGNIFICANCE: In order to solve the insufficient immunity induced by photothermal therapy (PTT), CpG ODNs were utilized to enhance the weak immune response mediated by PTT through inducing DCs maturation. Hence, we designed a polydopamine (PDA) based core-shell nanoplatform loading CpG ODNs followed by hyaluronic acid named PPP/CpG/HA to elicit robust photothermal ablation and antitumor immune responses. CpG ODNs were delivered to the tumor site through the targeting effect of the HA shell. The core-shell nanoplatform achieved a remarkable synergistic treatment effect in the maturation of DCs and activation of T cells, thereby overcoming insufficient immunity at distant tumor caused by PTT alone. The core-shell nanoplatform presents a potent photo-immunotherapy against proliferation and recurrence of melanoma.

A triple-stimulus responsive melanin-based nanoplatform with an aggregation-induced emission-active photosensitiser for imaging-guided targeted synergistic phototherapy/hypoxia-activated chemotherapy

Multimodal synergistic therapy has gained increasing attention in cancer treatment to overcome the limitations of monotherapy and achieve high anticancer efficacy. In this study, a synergistic phototherapy and hypoxia-activated chemotherapy nanoplatform based on natural melanin nanoparticles (MPs) loaded with the bioreduction prodrug tirapazamine (TPZ) and decorated with hyaluronic acid (HA) was developed. A self-reporting aggregation-induced emission (AIE)-active photosensitizer (PS) (BATTMN) was linked to the prepared nanoparticles by boronate ester bonds. The MPs and BATTMN-HA played roles as quenchers for PS and cancer targeting/photodynamic moieties, respectively. As a pH sensitive bond, the borate ester bonds between HA and BATTMN are hydrolysed in the acidic cancer environment, thereby separating BATTMN from the nanoparticles and leading to the induction of fluorescence for imaging-guided synergistic phototherapy/hypoxia-activated chemotherapy under dual irradiation. TPZ can be released upon activation by pH, near-infrared (NIR) and hyaluronidase (Hyal). Particularly, the hypoxia-dependent cytotoxicity of TPZ was amplified by oxygen consumption in the tumor intracellular environment induced by the AIE-active PS in photodynamic therapy (PDT). The nanoparticles developed in our research showed favorable photothermal conversion efficiency (η = 37%), desired cytocompatibility, and excellent synergistic therapeutic efficacy. The proposed nanoplatform not only extends the application scope of melanin materials with AIE-active PSs, but also offers useful insights into developing multistimulus as well as multimodal synergistic tumor treatment.

Ratiometric Fluorescence Imaging of Intracellular MicroRNA with NIR-Assisted Signal Amplification by a Ru-SiO2@Polydopamine Nanoplatform

Accurate and sensitive fluorescence imaging of intracellular miRNA is essential for understanding the mechanism underlying some physiological and pathological events, as well as the prevention and diagnosis of diseases. Herein, a highly sensitive ratiometric fluorescent nanoprobe for intracellular miRNA imaging was fabricated by integrating a Ru-SiO₂@polydopamine (Ru-SiO₂@PDA) nanoplatform with a near-infrared light (NIR)-assisted DNA strand displacement signal amplification strategy. The Ru-SiO₂@PDA spheres have excellent biosafety, high photothermal effect, and unique photophysical properties that can both emit a stable red fluorescence and well quench the fluorophores getting closer to them. So, when the fuel DNA and carboxyfluorescein (FAM)-labeled signal DNA are co-assembled on their outer surfaces, the FAM's green fluorescence is quenched, and a low ratiometric signal is obtained. However, in the presence of miRNA, the target displaces the signal DNA from the capture DNA, releasing the signal DNA far away from the Ru-SiO₂@PDA. Then, the green fluorescence recovers and leads to an enhanced I_green/I_red value. Under NIR light irradiation, the Ru-SiO₂@PDA increases the local temperature around the probe and triggers the release of fuel DNA, which thus recycles the target miRNA and effectively amplifies the ratiometric signal. Using A549 cells as a model, the nanoprobe realizes the highly sensitive ratiometric fluorescence imaging of miRNA let-7a, as well as its in vivo up- and down-regulation expressions. It provides a facile tool for highly sensitive and accurate intracellular miRNA detection through one-step incubation and may pave a new avenue for single-cell analysis.

Interfacial Engineering of Hybrid Polydopamine/Polypyrrole Nanosheets with Narrow Band Gaps for Fluorescence Sensing of MicroRNA

Nanoquencher-based biosensors have emerged as powerful tools for the detection of tumor markers, where challenges in efficiently docking the π-electron interaction interface toward nucleic acid probes containing π-electron-rich units of bases and fluorescent dyes still remain. Herein, we present hybrid polydopamine/polypyrrole nanosheets (PDA-PPy-NS) with π electron coupling and ultranarrow band gap (0.29 eV) by interfacial engineering of polymer hybrids at the nanoscale. PDA-PPy-NS were first prepared through oxidant-induced polymerization of pyrrole on PDA nanosheets. By utilizing fluorescent-dye-labeled single-stranded DNA as a probe, the hybrid nanoquencher showed ultrahigh fluorescence quenching ability, i.e., a Cy5-ssDNA/nanoquencher mass ratio of 36.9 under the complete quenching condition, which is comparable to that of graphene oxide. It was demonstrated that the energy level coupling of nanosheets and nucleic acid dye (Cy5) was the key factor contributing to the efficient photoinduced electron transfer (PET). Subsequently, the nanoquencher/DNA probe was proved to possess superior sensitivity and selectivity for efficient and reliable detection of miRNA-21 with a detection limit of 23.1 pM. Our work proves that the π-electron-rich biosensor interface can significantly enhance the PET efficiency, providing a theoretical basis for developing novel high-performance sensors.

Recent advances in dopamine-based materials constructed via one-pot co-assembly strategy

Dopamine-based materials have attracted widespread interest due to the outstanding physicochemical and biological properties. Since the first report on polydopamine (PDA) films, great efforts have been devoted to develop new fabrication strategies for obtaining novel nanostructures and desirable properties. Among them, one-pot co-assembly strategy offers a unique pathway for integrating multiple properties and functions into dopamine-based platform in a single simultaneous co-deposition step. This review focuses on the state of the art development of one-pot multicomponent self-assembly of dopamine-based materials and summarizes various single-step co-deposition approaches, including PDA-assisted adaptive encapsulation, co-assembly of dopamine with other molecules through non-covalent interactions or covalent interactions. Moreover, emerging applications of dopamine-based materials in the fields ranging from sensing, cancer therapy, catalysis, oil/water separation to antifouling are outlined. In addition, some critical remaining challenges and opportunities are discussed to pave the way towards the rational design and applications of dopamine-based materials.

A facile aptasensor based on polydopamine nanospheres for high-sensitivity sensing of T-2 toxin

A facile fluorescent aptasensor based on polydopamine nanospheres (PDANSs) has been proposed for the rapid and high sensitive sensing of T-2 toxin. PDANSs are dopamine-derived synthetic eumelanin polymers with excellent fluorescence quenching ability, dispersibility and biocompatibility. In the assay, 6-carboxyfluorescein (FAM)-labeled aptamers (FAM-aptamers) were adsorbed onto PDANSs via noncovalent bonding, resulting in quenching fluorescence. In the presence of T-2, the binding of T-2 to the aptamers could promote the formation of the A-form duplex hairpin structure, which was used as a sensing platform to detect T-2 on the basis of fluorescence recovery. The results showed that the aptasensor was rapid and sensitive for the detection of T-2 toxin with a linear detection range of 10-180 μg L-1 and a detection limit of 7.23 μg L-1. The performance of the proposed method was comparable with that of the liquid chromatography-mass spectrometry method (LC-MS). Thus, the aptasensor could be used for the determination of real samples. The design method proposed in this study provides a strategy for the development of PDANS-based toxin biosensors.

Fe3O4@polydopamine and Exo III-assisted homogeneous biorecognition reaction for convenient and ultrasensitive detection of kanamycin antibiotic

Herein, we report a Fe3O4@polydopamine (PDA) nanocomposite and exonuclease III (Exo III)-assisted homogeneous fluorescence biosensing method for ultrasensitive detection of kanamycin (Kana) antibiotic. A hairpin DNA containing the Kana-aptamer sequence (HP) was first designed for the highly specific biorecognition of the target analyte. Because of the aptamer biorecognition-induced structural change of HP and the highly effective catalyzed reaction of Exo III, a large amount of fluorophore labels were released from the designed fluorescence DNA probe. During the homogeneous reaction process, the Exo III-assisted dual recycling significantly amplified the fluorescence signal output. Moreover, the excessive probes were easily adsorbed and separated by the Fe3O4@PDA nanocomposite, which decreased the background signal and increased the signal-to-noise ratio. These strategies result in the excellent analytical performance of the method, including a very low detection limit of 0.023 pg mL-1 and a very wide linear range of six orders of magnitude. In addition, this method has convenient operation, excellent selectivity, repeatability and satisfactory reliability, and does not involve the design and utilization of complicated DNA sequences. Thus, it exhibits a promising prospect for practical applications.

Immune Checkpoint Inhibitor-Based Strategies for Synergistic Cancer Therapy

Immune checkpoint blockade therapy (ICBT) targeting checkpoints, such as, cytotoxic T-lymphocyte associated protein-4 (CTLA-4), programmed death-1 (PD-1), or programmed death-ligand 1 (PD-L1), can yield durable immune response in various types of cancers and has gained constantly increasing research interests in recent years. However, the efficacy of ICBT alone is limited by low response rate and immune-related side effects. Emerging preclinical and clinical studies reveal that chemotherapy, radiotherapy, phototherapy, or other immunotherapies can reprogramm immunologically "cold" tumor microenvironment into a "hot" one, thus synergizing with ICBT. In this review, the working principle and current development of various immune checkpoint inhibitors are summarized, while the interactive mechanism and recent progress of ICBT-based synergistic therapies with other immunotherapy, chemotherapy, phototherapy, and radiotherapy in fundamental and clinical studies in the past 5 years are depicted and highlighted. Moreover, the potential issues in current studies of ICBT-based synergistic therapies and future perspectives are also discussed.

Intervention of Polydopamine Assembly and Adhesion on Nanoscale Interfaces: State-of-the-Art Designs and Biomedical Applications

The translation of mussel-inspired wet adhesion to biomedical engineering fields have catalyzed the emergence of polydopamine (PDA)-based nanomaterials with privileged features and properties of conducting multiple interfacial interactions. Recent concerns and progress on the understanding of PDA's hierarchical structure and progressive assembly are inspiring approaches toward novel nanostructures with property and function advantages over simple nanoparticle architectures. Major breakthroughs in this field demonstrated the essential role of π-π stacking and π-cation interactions in the rational intervention of PDA self-assembly. In this review, the recently emerging concepts in the preparation and application of PDA nanomaterials, including 3D mesostructures, low-dimensional nanostructures, micelle/nanoemulsion based nanoclusters, as well as other multicomponent nanohybrids by the segregation and organization of PDA building blocks on nanoscale interfaces are outlined. The contribution of π-electron interactions on the interfacial loading/release of π electron-rich molecules (nucleic acids, drugs, photosensitizers) and the exogenous coupling of optical energy, as well as the impact of wet-adhesion interactions on the nano-bio interface interplay, are highlighted by discussing the structure-property relationships in their featured applications including fluorescent biosensing, gene therapy, drug delivery, phototherapy, combined therapy, etc. The limitations of current explorations, and future research directions are also discussed.

Many Birds, One Stone: A Smart Nanodevice for Ratiometric Dual-Spectrum Assay of Intracellular MicroRNA and Multimodal Synergetic Cancer Therapy

The development of a theragnostic platform integrating precise diagnosis and effective treatment is significant but still extremely challenging. Herein, an integrated smart nanodevice composed of Au@Cu_2-xS@polydopamine nanoparticles (ACSPs) and fuel DNA-conjugated tetrahedral DNA nanostructures (fTDNs) was constructed, in which the ACSP nanoprobe played multiple key roles in antitumor therapy as well as in situ monitoring of microRNAs (miRNAs) in cancer cells. Regarding the analysis, the ACSP probe contained two optical properties: excellent surface-enhanced Raman scattering (SERS) enhancement and high fluorescence (FL) quenching performance. Employing the ACSPs as the high-efficiency detection substrate combined with the fTDN-assisted DNA walking nanomachines as the superior amplification strategy, a SERS-FL dual-spectrum biosensor was constructed, which achieved an ultralow background signal and excellent sensitivity with detection limits of 0.11 pM and 4.95 aM by FL and SERS, respectively. Moreover, the rapid FL imaging and precise SERS quantitative detection for miRNA in cancer cells were also achieved by dual-signal ratio strategy, improving the accuracy of diagnosis. Regarding the therapeutic application, due to the high reactive oxygen species generation ability and excellent photothermal conversion efficiency, the ACSPs can also act as an all-in-one nanoagent for multimodal collaborative tumor therapy. Significantly, both in vivo and in vitro experiments confirmed its high biological safety and strong anticancer effect, indicating its promising theragnostic applications.

Hollow mesoporous polydopamine nanospheres: synthesis, biocompatibility and drug delivery

Various polydopamine (PDA) nanospheres were synthesized by utilizing triblock copolymer Pluronic F127 and 1,3,5-trimethylbenzene (TMB) as soft templates. Precise morphology control of polydopamine nanospheres was realized from solid polydopamine nanospheres to hollow polydopamine nanospheres, mesoporous polydopamine nanospheres and hollow mesoporous polydopamine nanospheres (H-MPDANSs) by adjusting the weight ratio of TMB to F127. The inner diameter of the prepared H-MPDANSs can be controlled in the range of 50-100 nm, and the outer diameter is about 180 nm. Furthermore, the thickness of hollow mesoporous spherical shell can be adjusted by changing the amount of dopamine (DA). The H-MPDANSs have good biocompatibility, excellent photothermal properties, high drug loading capacity, and outstanding sustainable drug release properties. In addition, both NIR laser irradiation and acid pH can facilitate the controlled release of doxorubicin (DOX) from H-MPDANSs@DOX.

Immobilising hairpin DNA-conjugated distyryl boron dipyrromethene on gold@polydopamine core-shell nanorods for microRNA detection and microRNA-mediated photodynamic therapy

A novel nanosystem of polydopamine-coated gold nanorods (AuNR@PDA) immobilised with molecules of hairpin DNA-conjugated distyryl boron dipyrromethene (DSBDP) was designed and fabricated for detection of microRNA-21 (miR-21). By using this oncogenic stimulus, the photodynamic effect of the DSBDP-based photosensitiser was also activated. In the presence of miR-21, the fluorescence intensity of the nanosystem was increased due to the dissociation of the conjugate from AuNR@PDA upon hybridisation. The intracellular fluorescence intensity triggered by intracellular miR-21 was in the order: MCF-7 > HeLa > HEK-293, which was in accordance with their miR-21 expression levels. The specificity was demonstrated by comparing the results with those of an analogue with a scrambled DNA sequence. The nanosystem could also result in miR-21-mediated photodynamic eradication of miR-21-overexpressed MCF-7 cells. After intravenous injection of the nanosystem into HeLa tumour-bearing nude mice, the fluorescence intensity of the tumour was increased over 24 h and was about 3-fold stronger than that of the scrambled analogue. Upon irradiation, the nanosystem could also greatly reduce the size of the tumour without causing significant tissue damage in the major organs. The overall results showed that this nanoplatform can serve as a specific and potent theranostic agent for simultaneous miR-21 detection and miR-21-mediated photodynamic therapy.

Phenolic-enabled nanotechnology: versatile particle engineering for biomedicine

Phenolics are ubiquitous in nature and have gained immense research attention because of their unique physiochemical properties and widespread industrial use. In recent decades, their accessibility, versatile reactivity, and relative biocompatibility have catalysed research in phenolic-enabled nanotechnology (PEN) particularly for biomedical applications which have been a major benefactor of this emergence, as largely demonstrated by polydopamine and polyphenols. Therefore, it is imperative to overveiw the fundamental mechanisms and synthetic strategies of PEN for state-of-the-art biomedical applications and provide a timely and comprehensive summary. In this review, we will focus on the principles and strategies involved in PEN and summarize the use of the PEN synthetic toolkit for particle engineering and the bottom-up synthesis of nanohybrid materials. Specifically, we will discuss the attractive forces between phenolics and complementary structural motifs in confined particle systems to synthesize high-quality products with controllable size, shape, composition, as well as surface chemistry and function. Additionally, phenolic's numerous applications in biosensing, bioimaging, and disease treatment will be highlighted. This review aims to provide guidelines for new scientists in the field and serve as an up-to-date compilation of what has been achieved in this area, while offering expert perspectives on PEN's use in translational research.