Organic/inorganic double-layered shells for multiple cytoprotection of individual living cells

Recent developments in polynorepinephrine: an innovative material for bioinspired coatings and colloids

While applications of polydopamine (PDA) are exponentially growing, research concerning the closely related neurotransmitter derivative polynorepinephrine (PNE) is in paucity, even though norepinephrine shares dopamine's ability to self-polymerize and form a coating film that is nearly substrate-agnostic. In this review, we demonstrate that PNE can be used as an alternative to PDA with equal or ever superior performance. PNE offers a thinner and smoother coating surface and thus is capable of more effectively resisting fouling by biofoulants, enhancing cell adhesion capability, surface hydrophilicity and biomolecule immobilisation. With the abundance of catechol, amino and hydroxyl groups in PNE's structure, PNE can perform as an electron donor and receiver at the same time and initiate ring opening and redox reactions. It has also been shown that PNE has the potential to be used as a biosensor due to its bioconjugation and molecular recognition ability. Here, we summarise the applications of PNE to date and discuss its potential research directions in the near future.

Enhancing Biohybrid CO2 to Multicarbon Reduction via Adapted Whole-Cell Catalysts

Catalytic CO₂ conversion to renewable fuel is of utmost importance to establish a carbon-neutral society. Bioelectrochemical CO₂ reduction, in which a solid cathode interfaces with CO₂-reducing bacteria, represents a promising approach for renewable and sustainable fuel production. The rational design of biocatalysts in the biohybrid system is imperative to effectively reduce CO₂ into valuable chemicals. Here, we introduce methanol adapted Sporomusa ovata (S. ovata) to enhance the slow metabolic activity of wild-type microorganisms to our semiconductive silicon nanowires (Si NWs) array for efficient CO₂ reduction. The adapted whole-cell catalysts enable an enhancement of CO₂ fixation with a superior faradaic efficiency on the poised Si NWs cathode. The synergy of the high-surface-area cathode and the adapted strain achieves a CO₂-reducing current density of 0.88 ± 0.11 mA/cm², which is 2.4-fold higher than the wild-type strain. This new generation of biohybrids using adapted S. ovata also decreases the charge transfer resistance at the cathodic interface and facilitates the faster charge transfer from the solid electrode to bacteria.

Cell-based biocomposite engineering directed by polymers

Biological cells such as bacterial, fungal, and mammalian cells always exploit sophisticated chemistries and exquisite micro- and nano-structures to execute life activities, providing numerous templates for engineering bioactive and biomorphic materials, devices, and systems. To transform biological cells into functional biocomposites, polymer-directed cell surface engineering and intracellular functionalization have been developed over the past two decades. Polymeric materials can be easily adopted by various cells through polymer grafting or in situ hydrogelation and can successfully bridge cells with other functional materials as interfacial layers, thus achieving the manufacture of advanced biocomposites through bioaugmentation of living cells and transformation of cells into templated materials. This review article summarizes the recent progress in the design and construction of cell-based biocomposites by polymer-directed strategies. Furthermore, the applications of cell-based biocomposites in broad fields such as cell research, biomedicine, and bioenergy are discussed. Last, we provide personal perspectives on challenges and future trends in this interdisciplinary area.

In situ silver nanoparticle coating of virions for quantification at single virus level

In situ labelling and encapsulation of biological entities, such as of single viruses, may provide a versatile approach to modulate their functionality and facilitate their detection at single particle level. Here, we introduce a novel virus metallization approach based on in situ coating of viruses in solution with silver nanoparticles (AgNP) in a two-step synthetic process, i.e. surface activation with a tannic acid - Sn(II) coordination complex, which subsequently induces silver ion (I) reduction. The metalic coating on the virus surface opens the opportunity for electrochemical quantification of the AgNP-tagged viruses by nano-impact electrochemistry on a microelectrode with single particle sensitivity, i.e. enable the detection of particles oherwise undetectable. We show that the silver coating of the virus particles impacting the electrode can be oxidized to produce distinct current peaks the frequency of which show a linear correlation with the virus count. The proof of the concept was done with inactivated Influenza A (H3N2) viruses resulting in their quantitation down to the femtomolar concentrations (ca. 5 × 10⁷ particles per mL) using 50 s counting sequences.

Metal-Organic Frameworks as a Versatile Materials Platform for Unlocking New Potentials in Biocatalysis

Biocatalysts immobilization with nanomaterials has promoted the development of biocatalysis significantly and made it an indispensable part of catalysis industries nowadays. Metal-organic frameworks (MOFs), constructed from organic linkers and metal ions or clusters, have raised significant interests for biocatalysts immobilization in recent years. The diversity of building units, molecular-scale tunability, and modular synthetic routes of MOFs greatly expand its ability as the host to integrate with biocatalysts. In this review, the general synthetic strategies of MOFs with biocatalysts are first summarized. Then, the recent progress of MOFs as a versatile host for a series of biocatalysts, including natural enzymes, nanozymes, and organism-based biocatalysts, followed by the introduction of MOFs themselves as biocatalysts, is discussed. Furthermore, the stimuli-responsive properties of MOFs themselves or the additional functionalization of protein, polymer, and peptide within/on MOF that enable the biocatalysts with the controllable and tunable behavior are also summarized, which could unlock new potentials in biocatalysis. Finally, a perspective of the upcoming challenges, potential impacts, and future directions of biocatalytic MOFs is provided.

Metal-organic frameworks coupling simultaneous saccharication and fermentation for enhanced butyric acid production from rice straw under visible light by Clostridium tyrobutyricum CtΔack::cat1

Here, Metal-Organic Frameworks (MOFs) coupling simultaneous saccharification and fermentation for butyric acid production using rice straw was constructed. Clostridium tyrobutyricum Δack::cat1, with deleted ack gene and overexpressed cat1 gene, was used as the butyric-acid-fermentation strain. MOFs was employed as a photocatalyst to improve butyric acid production, as well as a cytoprotective exoskeleton with immobilized cellulase for the hydrolysis of rice straw. Thus, the survival of MOFs-coated strain, the thermostability and pH stability of cellulase both remarkably increased. As a result, 55% of rice straw was hydrolyzed in 24 h, and the final concentration of butyric acid in visible light was increased by 14.23% and 29.16% compared to uncoated and coated strain without visible light, respectively. Finally, 26.25 g/L of butyric acid with a productivity of 0.41 g/L·h in fed-batch fermentation was obtained. This novel process inspires green approach of abundant low-cost feedstocks utilization for chemical production.

Controlling the growth of Escherichia coli by layer-by-layer encapsulation

Escherichia coli is one of the most common commensal aerobic bacteria in the gut microbiota of humans (and other mammals). Nevertheless, if left free to proliferate, it can induce a large range of diseases from diarrhoea to extra-intestinal diseases. In recent years, this bacterium had become increasingly resistant to antibiotics. It is therefore essential to implement new approaches able to maintain both bacterial viability and to control their proliferation. In this context, we developed a process to encapsulate Escherichia coli in polymer shells. We took advantage of the fact that this bacterium has a negatively charged surface and modified it via a layer-by-layer process, i.e. with oppositely charged polyelectrolyte pairs (namely chitosan as the polycation and alginate or dextran sulfate as polyanion). We successfully demonstrate the controlled coating of the bacterial surface via zeta potential measurement, the viability of the encapsulated bacteria and a delay in growth due to the multilayer coating. This delay was dependent on the number of polyelectrolyte layers.

Recent advances in single-cell analysis: Encapsulation materials, analysis methods and integrative platform for microfluidic technology

Traditional cell biology researches on cell populations by their origin, tissue, morphology, and secretions. Because of the heterogeneity of cells, research at the single-cell level can obtain more accurate and comprehensive information that reflects the physiological state and process of the cell, increasing the significance of single-cell analysis. The application of single-cell analysis is faced with the problem of contaminated or damaged cells caused by cell sample transportation. Reversible encapsulation of a single cell can protect cells from the external environment and open the encapsulation shell to release cells, thus preserving cell integrity and improving extraction efficiency of analytes. Meanwhile, microfluidic single cell analysis (MSCA) exhibits integration, miniaturization, and high throughput, which can considerably improve the efficiency of single-cell analysis. The researches on single-cell reversible encapsulation materials, single-cell analysis methods, and the MSCA integration platform are analyzed and summarized in this review. The problems of single-cell viability, network of single-cell signal, and simultaneous detection of multiple biotoxins in food based on single-cell are proposed for future research.

Bioinspired Cell Silicification: From Extracellular to Intracellular

In nature, biosilicification directs the formation of elaborate amorphous silica exoskeletons that provide diatoms mechanically strong, chemically inert, non-decomposable silica armor conferring chemical and thermal stability as well as resistance to microbial attack, without changing the optical transparency or adversely effecting nutrient and waste exchange required for growth. These extraordinary silica/cell biocomposites have inspired decades of biomimetic research aimed at replication of diatoms' hierarchically organized exoskeletons, immobilization of cells or living organisms within silica matrices and coatings to protect them against harmful external stresses, genetic re-programming of cellular functions by virtue of physico-chemical confinement within silica, cellular integration into devices, and endowment of cells with non-native, abiotic properties through facile silica functionalization. In this Perspective, we focus our discussions on the development and concomitant challenges of bioinspired cell silicification ranging from "cells encapsulated within 3D silica matrices" and "cells encapsulated within 2D silica shells" to extra- and intracellular silica replication, wherein all biomolecular interfaces are encased within nanoscopic layers of amorphous silica. We highlight notable examples of advances in the science and technology of biosilicification and consider challenges to advancing the field, where we propose cellular "mineralization" with arbitrary nanoparticle exoskeletons as a generalizable means to impart limitless abiotic properties and functions to cells, and, based on the interchangeability of water and silicic acid and analogies between amorphous ice and amorphous silica, we consider "freezing" cells within amorphous silica as an alternative to cryo-preservation.

Polymerization-Mediated Multifunctionalization of Living Cells for Enhanced Cell-Based Therapy

Surface decoration of living cells by exogenous substances offers a unique tool for understanding and tuning cell behaviors, which plays a critical role in cell-based therapy. Here, a facile yet versatile approach for decorating individual living cells with multimodal coatings is reported. By simply co-depositing with dopamine under a cytocompatible condition, various functional small molecules and polymers can be encoded to form a multifunctional coating on a cell's surface. The accessibility and versatility of this method to decorate diverse cells, including bacteria, fungi, and mammalian cells is demonstrated. With the ability to tune surface functions, ligand co-deposited gut microbiota is prepared as oral therapeutics for targeted treatment of colitis. Given the dual cytoprotective and targeting effects of the coating, decorated cells show more than 30-times higher bioavailability in the gut and fourfold higher accumulation in the inflamed tissue in comparison with those of uncoated bacteria. Multimodal therapeutic cells further validate strikingly increased treatment efficacy over clinical aminosalicylic acid in colitis mice. Decorating with multifunctional coatings proposes a robust platform for developing multimodal cells for enhanced cell-based therapy.

Novel nanomaterial-organism hybrids with biomedical potential

Instinctive hierarchically biomineralized structures of various organisms, such as eggs, algae, and magnetotactic bacteria, afford extra protection and distinct performance, which endow fragile organisms with a tenacious ability to adapt and survive. However, spontaneous formation of hybrid materials is difficult for most organisms in nature. Rapid development of chemistry and materials science successfully obtained the combinations of organisms with nanomaterials by biomimetic mineralization thus demonstrating the reproduction of the structures and functions and generation of novel functions that organisms do not possess. The rational design of biomaterial-organism hybridization can control biological recognition, interactions, and metabolism of the organisms. Thus, nanomaterial-organism hybrids represent a next generation of organism engineering with great potential biomedical applications. This review summarizes recent advances in material-directed organism engineering and is mainly focused on biomimetic mineralization technologies and their outstanding biomedical applications. Three representative types of biomimetic mineralization are systematically introduced, including external mineralization, internal mineralization, and genetic engineering mineralization. The methods involving hybridization of nanomaterials and organisms based on biomimetic mineralization strategies are described. These strategies resulted in applications of various nanomaterial-organism hybrids with multiplex functions in cell engineering, cancer treatment, and vaccine improvement. Unlike classical biological approaches, this material-based bioregulation is universal, effective, and inexpensive. In particular, instead of traditional medical solutions, the integration of nanomaterials and organisms may exploit novel strategies to solve current biomedical problems. This article is categorized under: Implantable Materials and Surgical Technologies > Nanomaterials and Implants Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease.

Improvement of organisms by biomimetic mineralization: A material incorporation strategy for biological modification

Biomineralization, a bio-organism controlled mineral formation process, plays an important role in linking biological organisms and mineral materials in nature. Inspired by biomineralization, biomimetic mineralization is used as a bridge tool to integrate biological organisms and functional materials together, which can be beneficial for the development of diversified functional organism-material hybrids. In this review, recent progresses on the techniques of biomimetic mineralization for organism-material combinations are summarized and discussed. Based upon these techniques, the preparations and applications of virus-, prokaryotes-, and eukaryotes-material hybrids have been presented and they demonstrate the great potentials in the fields of vaccine improvement, cell protection, energy production, environmental and biomedical treatments, etc. We suggest that more researches about functional organism and material combination with more biocompatible techniques should be developed to improve the design and applications of specific organism-material hybrids. These rationally designed organism-material hybrids will shed light on the production of "live materials" with more advanced functions in future. STATEMENT OF SIGNIFICANCE: This review summaries the recent attempts on improving biological organisms by their integrations with functional materials, which can be achieved by biomimetic mineralization as the combination tool. The integrated materials, as the artificial shells or organelles, confer diversified functions on the enclosed organisms. The successful constructions of various virus-, prokaryotes-, and eukaryotes-material hybrids have demonstrated the great potentials of the material incorporation strategy in vaccine development, cancer treatment, biological photosynthesis and environment protection etc. The suggested challenges and perspectives indicate more inspirations for the future development of organism-material hybrids.

A Removable Artificial Cell Wall for Withstanding Ciprofloxacin

The pollution of antibiotics in aquaculture environment is increasingly serious, and excessive antibiotics will kill the probiotics in aquaculture feed. How to improve the viability of probiotics in the antibiotics-contaminated environment is of significance. In this study, a new strategy for protecting Saccharomyces cerevisiae cells in situ against antibiotics is constructed based on cell surface engineering technology by putting on wearable protective layers for cells. The protective layer is constructed around cellular surface via the self-assembly of coacervate microdroplets that consist of carboxymethyl chitosan and carboxyl dextran. Without affecting the cell viability, the protective layer can grasp ciprofloxacin and decrease the contact of ciprofloxacin to cells and consequently improve the survival rate of cells when exposing to ciprofloxacin. This work highlights a facile strategy to establish removable artificial cell wall by biodegradable polysaccharides for improving the productivity of probiotics in antibiotic environments.

Biodegradable nanofibrous temperature-responsive gelling microspheres for heart regeneration

Myocardial infarction (heart attack) is the number one killer of heart patients. Existing treatments for heart attack do not address the underlying problem of cardiomyocyte (CM) loss and cannot regenerate the myocardium. Introducing exogenous cardiac cells is required for heart regeneration due to the lack of resident progenitor cells and very limited proliferative potential of adult CMs. Poor retention of transplanted cells is the critical bottleneck of heart regeneration. Here, we report the invention of a poly(l-lactic acid)-b-poly(ethylene glycol)-b-poly(N-Isopropylacrylamide) copolymer and its self-assembly into nanofibrous gelling microspheres (NF-GMS). The NF-GMS undergo thermally responsive transition to form not only a 3D hydrogel after injection in vivo, but also exhibit architectural and structural characteristics mimicking the native extracellular matrix (ECM) of nanofibrous proteins and gelling proteoglycans or polysaccharides. By integrating the ECM-mimicking features, injectable form, and the capability of maintaining 3D geometry after injection, the transplantation of hESC-derived CMs carried by NF-GMS led to a striking 10-fold graft size increase over direct CM injection in an infarcted rat model, which is the highest reported engraftment to date. Furthermore, NF-GMS carried CM transplantation dramatically reduced infarct size, enhanced integration of transplanted CMs, stimulated vascularization in the infarct zone, and led to a substantial recovery of cardiac function. The NF-GMS may also serve as advanced injectable and integrative biomaterials for cell/biomolecule delivery in a variety of biomedical applications.

Nanobiohybrids: Materials approaches for bioaugmentation

Nanobiohybrids, synthesized by integrating functional nanomaterials with living systems, have emerged as an exciting branch of research at the interface of materials engineering and biological science. Nanobiohybrids use synthetic nanomaterials to impart organisms with emergent properties outside their scope of evolution. Consequently, they endow new or augmented properties that are either innate or exogenous, such as enhanced tolerance against stress, programmed metabolism and proliferation, artificial photosynthesis, or conductivity. Advances in new materials design and processing technologies made it possible to tailor the physicochemical properties of the nanomaterials coupled with the biological systems. To date, many different types of nanomaterials have been integrated with various biological systems from simple biomolecules to complex multicellular organisms. Here, we provide a critical overview of recent developments of nanobiohybrids that enable new or augmented biological functions that show promise in high-tech applications across many disciplines, including energy harvesting, biocatalysis, biosensing, medicine, and robotics.

Comparison of different zinc precursors for the construction of zeolitic imidazolate framework-8 artificial shells on living cells

The robust cell-in-shell structure is highly desirable for endowing living cells with an artificial exoskeleton to defend them from many environmental factors such as osmotic pressure, shear force, heat, UV radiation, and enzymes. Cell encapsulation has shown potential applications in many fields and attracted increasing interest. However, the influences of the precursors on the cell viability during the shell formation process are not clear and seldom investigated. Here, zinc nitrite, zinc acetate and zinc sulfate were applied individually to synthesize zeolitic imidazolate framework-8 (ZIF-8) shells on living cells. All the zinc salt precursors could convert to a ZIF-8 layer on the living cell surface. The zinc salts and organic ligand did not exhibit obvious toxicity to yeast cells when applied individually. However, dead cells were observed during the living cell encapsulation process using different zinc precursors. Compared with zinc nitrate and zinc acetate, ZIF-8 formed by zinc sulfate led to a higher percentage of cell death, especially under high concentrations of zinc sulfate. Cell division was suppressed by the ZIF-8 shell but restored fully upon shell removal by EDTA solution or pH 4.0 buffer. Escherichia coli (E. coli) cells showed a lower percentage of cell death, indicating excellent tolerance to the ZIF-8 encapsulation process. This work illustrates the cell toxicity during the formation of ZIF-8 cell shells by different zinc salts and engineering of the cell growth by MOF coating, which could provide a foundation for further quantitative analysis and potential applications in biomedicine and bioengineering.

Click Reaction for Reversible Encapsulation of Single Yeast Cells

Cell surface engineering is an emerging technology to encapsulate cells in order to enhance their functions. However, methods for reversible encapsulation of cells with abiotic functionalities are rare. Herein, we describe a phenylboronic acid based click reaction for encapsulation of single yeast cells using mesoporous silica nanoparticles (MSNs). This encapsulation does not impact natural growth of the cells and leads to a significant enhancement of cell survival in a variety of hostile environments. Owing to the glucose-responsiveness of the boronate ester bond between cell surface polysaccharides and B(OH)₂-grafted MSNs, encapsulation was reversible by addition or removal of glucose. This effort offers living cells effective protection under harsh conditions and enables reversible assembling-detaching of abiotic functions.

A Chain-Elongated Oligophenylenevinylene Electrolyte Increases Microbial Membrane Stability

A novel conjugated oligoelectrolyte (COE) material, named S6, is designed to have a lipid-bilayer stabilizing topology afforded by an extended oligophenylenevinylene backbone. S6 intercalates biological membranes acting as a hydrophobic support for glycerophospholipid acyl chains. Indeed, Escherichia coli treated with S6 exhibits a twofold improvement in butanol tolerance, a relevant feature to achieve within the general context of modifying microorganisms used in biofuel production. Filamentous growth, a morphological stress response to butanol toxicity in E. coli, is observed in untreated cells after incubation with 0.9% butanol (v/v), but is mitigated by S6 treatment. Real-time fluorescence imaging using giant unilamellar vesicles reveals the extent to which S6 counters membrane instability. Moreover, S6 also reduces butanol-induced lipopolysaccharide release from the outer membrane to further maintain cell integrity. These findings highlight a deliberate effort in the molecular design of a chain-elongated COE to stabilize microbial membranes against environmental challenges.

Biomedical Applications of Layer-by-Layer Self-Assembly for Cell Encapsulation: Current Status and Future Perspectives

Encapsulating living cells within multilayer functional shells is a crucial extension of cellular functions and a further development of cell surface engineering. In the last decade, cell encapsulation has been widely utilized in many cutting-edge biomedical fields. Compared with other techniques for cell encapsulation, layer-by-layer (LbL) self-assembly technology, due to the versatility and tunability to fabricate diverse multilayer shells with controllable compositions and structures, is considered as a promising approach for cell encapsulation. This review summarizes the state-of-the-art and potential future biomedical applications of LbL cell encapsulation. First of all, a brief introduction to the LbL self-assembly technique, including assembly mechanisms and technologies, is made. Next, different cell encapsulation strategies by LbL self-assembly techniques are explained. Then, the biomedical applications of LbL cell encapsulation in cell-based biosensors, cell transplantation, cell/molecule delivery, and tissue engineering, are highlighted. Finally, discussions on the current limitations and future perspectives of LbL cell encapsulation are also provided.

Nanoarchitectonics meets cell surface engineering: shape recognition of human cells by halloysite-doped silica cell imprints

Cell surface engineering, as a practical manifestation of nanoarchitectonics, is a powerful tool to modify and enhance properties of live cells. In turn, cells may serve as sacrificial templates to fabricate cell-mimicking materials. Herein we report a facile method to produce cell-recognising silica imprints capable of the selective detection of human cells. We used HeLa cells to template silica inorganic shells doped with halloysite clay nanotubes. The shells were destroyed by sonication resulting in the formation of polydisperse hybrid imprints that were used to recognise HeLa cells in liquid media supplemented with yeast. We believe that methodology reported here will find applications in biomedical and clinical research.

One-Step Assembly of a Biomimetic Biopolymer Coating for Particle Surface Engineering

Advances in material design and applications are highly dependent on the development of particle surface engineering strategies. However, few universal methods can functionalize particles of different compositions, sizes, shapes, and structures. The amyloid-like lysozyme assembly-mediated surface functionalization of inorganic, polymeric or metal micro/nanoparticles in a unique amyloid-like phase-transition buffer containing lysozyme are described. The rapid formation of a robust nanoscale phase-transitioned lysozyme (PTL) coating on the particle surfaces presents strong interfacial binding to resist mechanical and chemical peeling under harsh conditions and versatile surface functional groups to support various sequential surface chemical derivatizations, such as radical living graft polymerization, the electroless deposition of metals, biomineralization, and the facile synthesis of Janus particles and metal/protein capsules. Being distinct from other methods, the preparation of this pure protein coating under biocompatible conditions (e.g., neutral pH and nontoxic reagents) provides a reliable opportunity to directly modify living cell surfaces without affecting their biological activity. The PTL coating arms yeasts with a functional shell to protect their adhered body against foreign enzymatic digestion. The PTL coating further supports the surface immobilization of living yeasts for heterogeneous microbial reactions and the sequential surface chemical derivatization of the cell surfaces, e.g., radical living graft polymerization.

A bilayered nanoshell for durable protection of single yeast cells against multiple, simultaneous hostile stimuli

Single cell surface engineering provides the most efficient, non-genetic strategy to enhance cell stability. However, it remains a huge challenge to improve cell stability in complex artificial environments. Here, a soft biohybrid interfacial layer is fabricated on individual living-cell surfaces by their exposure to a suspension of gold nanoparticles and l-cysteine to form a protecting functional layer to which porous silica layers were bound yielding pores with a diameter of 3.9 nm. The living cells within the bilayered nanoshells maintained high viability (96 ± 2%) as demonstrated by agar plating, even after five cycles of simultaneous exposure to high temperature (40 °C), lyticase and UV light. Moreover, yeast cells encapsulated in bilayered nanoshells were more recyclable than native cells due to nutrient storage in the shell.

Controlling the Growth of Staphylococcus epidermidis by Layer-By-Layer Encapsulation

Commensal skin bacteria such as Staphylococcus epidermidis are currently being considered as possible components in skin-care and skin-health products. However, considering the potentially adverse effects of commensal skin bacteria if left free to proliferate, it is crucial to develop methodologies that are capable of maintaining bacteria viability while controlling their proliferation. Here, we encapsulate S. epidermidis in shells of increasing thickness using layer-by-layer assembly, with either a pair of synthetic polyelectrolytes or a pair of oppositely charged polysaccharides. We study the viability of the cells and their delay of growth depending on the composition of the shell, its thickness, the charge of the last deposited layer, and the degree of aggregation of the bacteria which is varied using different coating procedures-among which is a new scalable process that easily leads to large amounts of nonaggregated bacteria. We demonstrate that the growth of bacteria is not controlled by the mechanical properties of the shell but by the bacteriostatic effect of the polyelectrolyte complex, which depends on the shell thickness and charge of its outmost layer, and involves the diffusion of unpaired amine sites through the shell. The lag times of growth are sufficient to prevent proliferation for daily topical applications.

Strategic Advances in Formation of Cell-in-Shell Structures: From Syntheses to Applications

Single-cell nanoencapsulation, forming cell-in-shell structures, provides chemical tools for endowing living cells, in a programmed fashion, with exogenous properties that are neither innate nor naturally achievable, such as cascade organic-catalysis, UV filtration, immunogenic shielding, and enhanced tolerance in vitro against lethal factors in real-life settings. Recent advances in the field make it possible to further fine-tune the physicochemical properties of the artificial shells encasing individual living cells, including on-demand degradability and reconfigurability. Many different materials, other than polyelectrolytes, have been utilized as a cell-coating material with proper choice of synthetic strategies to broaden the potential applications of cell-in-shell structures to whole-cell catalysis and sensors, cell therapy, tissue engineering, probiotics packaging, and others. In addition to the conventional "one-time-only" chemical formation of cytoprotective, durable shells, an approach of autonomous, dynamic shellation has also recently been attempted to mimic the naturally occurring sporulation process and to make the artificial shell actively responsive and dynamic. Here, the recent development of synthetic strategies for formation of cell-in-shell structures along with the advanced shell properties acquired is reviewed. Demonstrated applications, such as whole-cell biocatalysis and cell therapy, are discussed, followed by perspectives on the field of single-cell nanoencapsulation.

Single cells in nanoshells for the functionalization of living cells

Inspired by the characteristics of cells in live organisms, new types of hybrids have been designed comprising live cells and abiotic materials having a variety of structures and functionalities. The major goal of these studies is to uncover hybridization approaches that promote cell stabilization and enable the introduction of new functions into living cells. Single-cells in nanoshells have great potential in a large number of applications including bioelectronics, cell protection, cell therapy, and biocatalysis. In this review, we discuss the results of investigations that have focused on the synthesis, structuration, functionalization, and applications of these single-cells in nanoshells. We describe synthesis methods to control the structural and functional features of single-cells in nanoshells, and further develop their applications in sustainable energy, environmental remediation, green biocatalysis, and smart cell therapy. Perceived limitations of single-cells in nanoshells have been also identified.

Metal-Organic Frameworks for Cell and Virus Biology: A Perspective

Metal-organic frameworks (MOFs) are a class of coordination polymers, consisting of metal ions or clusters linked together by chemically mutable organic groups. In contrast to zeolites and porous carbons, MOFs are constructed from a building block strategy that enables molecular level control of pore size/shape and functionality. An area of growing interest in MOF chemistry is the synthesis of MOF-based composite materials. Recent studies have shown that MOFs can be combined with biomacromolecules to generate novel biocomposites. In such materials, the MOF acts as a porous matrix that can encapsulate enzymes, oligonucleotides, or even more complex structures that are capable of replication/reproduction (i.e., viruses, bacteria, and eukaryotic cells). The synthetic approach for the preparation of these materials has been termed "biomimetic mineralization", as it mimics natural biomineralization processes that afford protective shells around living systems. In this Perspective, we focus on the preparation of MOF biocomposites that are composed of complex biological moieties such as viruses and cells and canvass the potential applications of this encapsulation strategy to cell biology and biotechnology.

Decorating an individual living cell with a shell of controllable thickness by cytocompatible surface initiated graft polymerization

A polymeric shell of controllable-thickness was synthesized on a living yeast cell by visible light-induced graft polymerization.

Artificial Spores: Immunoprotective Nanocoating of Red Blood Cells with Supramolecular Ferric Ion-Tannic Acid Complex

The blood-type-mismatch problem, in addition to shortage of blood donation, in blood transfusion has prompted the researchers to develop universal blood that does not require blood typing. In this work, the "cell-in-shell" (i.e., artificial spore) approach is utilized to shield the immune-provoking epitopes on the surface of red blood cells (RBCs). Individual RBCs are successfully coated with supramolecular metal-organic coordination complex of ferric ion (Fe^III) and tannic acid (TA). The use of isotonic saline (0.85% NaCl) is found to be critical in the formation of stable, reasonably thick (20 nm) shells on RBCs without any aggregation and hemolysis. The formed "RBC-in-shell" structures maintain their original shapes, and effectively attenuate the antibody-mediated agglutination. Moreover, the oxygen-carrying capability of RBCs is not deteriorated after shell formation. This work suggests a simple but fast method for generating immune-camouflaged RBCs, which would contribute to the development of universal blood.

Biomineralization: From Material Tactics to Biological Strategy

Biomineralization is an important tactic by which biological organisms produce hierarchically structured minerals with marvellous functions. Biomineralization studies typically focus on the mediation function of organic matrices on inorganic minerals, which helps scientists to design and synthesize bioinspired functional materials. However, the presence of inorganic minerals may also alter the native behaviours of organic matrices and even biological organisms. This progress report discusses the latest achievements relating to biomineralization mechanisms, the manufacturing of biomimetic materials and relevant applications in biological and biomedical fields. In particular, biomineralized vaccines and algae with improved thermostability and photosynthesis, respectively, demonstrate that biomineralization is a strategy for organism evolution via the rational design of organism-material complexes. The successful modification of biological systems using materials is based on the regulatory effect of inorganic materials on organic organisms, which is another aspect of biomineralization control. Unlike previous studies, this study integrates materials and biological science to achieve a more comprehensive view of the mechanisms and applications of biomineralization.

Engineering live cell surfaces with functional polymers via cytocompatible controlled radical polymerization

The capability to graft synthetic polymers onto the surfaces of live cells offers the potential to manipulate and control their phenotype and underlying cellular processes. Conventional grafting-to strategies for conjugating preformed polymers to cell surfaces are limited by low polymer grafting efficiency. Here we report an alternative grafting-from strategy for directly engineering the surfaces of live yeast and mammalian cells through cell surface-initiated controlled radical polymerization. By developing cytocompatible PET-RAFT (photoinduced electron transfer-reversible addition-fragmentation chain-transfer polymerization), synthetic polymers with narrow polydispersity (M_w/M_n < 1.3) could be obtained at room temperature in 5 minutes. This polymerization strategy enables chain growth to be initiated directly from chain-transfer agents anchored on the surface of live cells using either covalent attachment or non-covalent insertion, while maintaining high cell viability. Compared with conventional grafting-to approaches, these methods significantly improve the efficiency of grafting polymer chains and enable the active manipulation of cellular phenotypes.

Chemically individual armoured bioreporter bacteria used for the in vivo sensing of ultra-trace toxic metal ions

A chemically engineered mesoporous silica armour is developed for simultaneously improving bioreporter bacterial vitality and shielding infectivity.

Inkjetting Plus Peroxidase-Mediated Hydrogelation Produces Cell-Laden, Cell-Sized Particles with Suitable Characters for Individual Applications

The authors report a method to prepare cell-laden, cell-sized microparticles from various materials suitable for individual applications. The method includes a piezoelectric inkjetting technology and a horseradish peroxidase (HRP)-catalyzed crosslinking reaction. The piezoelectric inkjetting technology enables production of cell-laden, cell-sized (20-60 μm) droplets from a polymer aqueous solution. The HRP-catalyzed crosslinking of the polymer in the ejected solution enables production of spherical microparticles from various materials. Superior cytocompatibility of the microencapsulation method is confirmed from the viability and growth profiles of normal murine mammary gland epithelial cells.

Turning Diamagnetic Microbes into Multinary Micro-Magnets: Magnetophoresis and Spatio-Temporal Manipulation of Individual Living Cells

Inspired by the biogenic magnetism found in certain organisms, such as magnetotactic bacteria, magnetic nanomaterials have been integrated into living cells for bioorthogonal, magnetic manipulation of the cells. However, magnetized cells have so far been reported to be only binary system (on/off) without any control of magnetization degree, limiting their applications typically to the simple accumulation or separation of cells as a whole. In this work, the magnetization degree is tightly controlled, leading to the generation of multiple subgroups of the magnetized cells, and each subgroup is manipulated independently from the other subgroups in the pool of heterogeneous cell-mixtures. This work will provide a strategic approach to tailor-made fabrication of magnetically functionalized living cells as micro-magnets, and open new vistas in biotechnological and biomedical applications, which highly demand the spatio-temporal manipulation of living cells.

Coating Strategies Using Layer-by-layer Deposition for Cell Encapsulation

The layer-by-layer (LbL) deposition technique is widely used to develop multilayered films based on the directed assembly of complementary materials. In the last decade, thin multilayers prepared by LbL deposition have been applied in biological fields, namely, for cellular encapsulation, due to their versatile processing and tunable properties. Their use was suggested as an alternative approach to overcome the drawbacks of bulk hydrogels, for endocrine cells transplantation or tissue engineering approaches, as effective cytoprotective agents, or as a way to control cell division. Nanostructured multilayered materials are currently used in the nanomodification of the surfaces of single cells and cell aggregates, and are also suitable as coatings for cell-laden hydrogels or other biomaterials, which may later be transformed to highly permeable hollow capsules. In this Focus Review, we discuss the applications of LbL cell encapsulation in distinct fields, including cell therapy, regenerative medicine, and biotechnological applications. Insights regarding practical aspects required to employ LbL for cell encapsulation are also provided.

Cell-in-Shell Hybrids: Chemical Nanoencapsulation of Individual Cells

Nature has developed a fascinating strategy of cryptobiosis ("secret life") for counteracting the stressful, and often lethal, environmental conditions that fluctuate sporadically over time. For example, certain bacteria sporulate to transform from a metabolically active, vegetative state to an ametabolic endospore state. The bacterial endospores, encased within tough biomolecular shells, withstand the extremes of harmful stressors, such as radiation, desiccation, and malnutrition, for extended periods of time and return to a vegetative state by breaking their protective shells apart when their environment becomes hospitable for living. Certain ciliates and even higher organisms, for example, tardigrades, and others are also found to adopt a cryptobiotic strategy for survival. A common feature of cryptobiosis is the structural presence of tough sheaths on cellular structures. However, most cells and cellular assemblies are not "spore-forming" and are vulnerable to the outside threats. In particular, mammalian cells, enclosed with labile lipid bilayers, are highly susceptible to in vitro conditions in the laboratory and daily life settings, making manipulation and preservation difficult outside of specialized conditions. The instability of living cells has been a main bottleneck to the advanced development of cell-based applications, such as cell therapy and cell-based sensors. A judicious question arises: can cellular tolerance against harmful stresses be enhanced by simply forming cell-in-shell hybrid structures? Experimental results suggest that the answer is yes. A micrometer-sized "Iron Man" can be generated by chemically forming an ultrathin (<100 nm) but durable shell on a "non-spore-forming" cell. Since the report on silica nanoencapsulation of yeast cells, in which cytoprotective yeast-in-silica hybrids were formed, several synthetic strategies have been developed to encapsulate individual cells in a cytocompatible fashion, mimicking the cryptobiotic cell-in-shell structures found in nature, for example, bacterial endospores. Bioinspired silicification and phenolics-based coatings are, so far, the main approaches to the formation of cytoprotective cell-in-shell hybrids, because they ensure cell viability during encapsulations and also generate durable nanoshells on cell surfaces. The resulting cell-in-shell hybrids extrinsically possess enhanced resistance to external aggressors, and more intriguingly, the encapsulation alters their metabolic activity, exemplified by retarded or suppressed cell cycle progression. In addition, recent developments in the field have further advanced the synthetic tools available to the stage of chemical sporulation and germination of mammalian cells, where cytoprotective shells are formed on labile mammalian cells and broken apart on demand. For example, individual HeLa cells are coated with a metal-organic complex of ferric ion and tannic acid, and cellular adherence and proliferation are controlled by the programmed shell formation and degradation. Based on these demonstrations, the (degradable) cell-in-shell hybrids are anticipated to find their applications in various biomedical and bionanotechnological areas, such as cytotherapeutics, high-throughput screening, sensors, and biocatalysis, as well as providing a versatile research platform for single-cell biology.

A degradable polydopamine coating based on disulfide-exchange reaction

Although the programmed degradation of biocompatible films finds applications in various fields including biomedical and bionanotechnological areas, coating methods have generally been limited to be substrate-specific, not applicable to any kinds of substrates. In this paper, we report a dopamine derivative, which allows for both universal coating of various substrates and stimuli-responsive film degradation, inspired by mussel-adhesive proteins. Two dopamine moieties are linked together by the disulfide bond, the cleavage of which enables the programmed film degradation. Mechanistic analysis of the degradable films indicates that the initial cleavage of the disulfide linkage causes rapid uptake of water molecules, hydrating the films, which leads to rapid degradation. Our substrate-independent coating of degradable films provides an advanced tool for drug delivery systems, tissue engineering, and anti-fouling strategies.

Chemical sporulation and germination: cytoprotective nanocoating of individual mammalian cells with a degradable tannic acid-FeIII complex

Individual mammalian cells were coated with cytoprotective and degradable films by cytocompatible processes maintaining the cell viability. Three types of mammalian cells (HeLa, NIH 3T3, and Jurkat cells) were coated with a metal-organic complex of tannic acid (TA) and ferric ion, and the TA-Fe(III) nanocoat effectively protected the coated mammalian cells against UV-C irradiation and a toxic compound. More importantly, the cell proliferation was controlled by programmed formation and degradation of the TA-Fe(III) nanocoat, mimicking the sporulation and germination processes found in nature.

Cytocompatible in situ cross-linking of degradable LbL films based on thiol-exchange reaction

Formation of both mechanically durable and programmably degradable layer-by-layer (LbL) films in a biocompatible fashion has potential applications in cell therapy, tissue engineering, and drug-delivery systems, where the films are interfaced with living cells. In this work, we developed a simple but versatile method for generating in situ cross-linked and responsively degradable LbL films, based on the thiol-exchange reaction, under highly cytocompatible conditions (aqueous solution at pH 7.4 and room temperature). The cytocompatibility of the processes was confirmed by coating individual yeast cells with the cross-linked LbL films and breaking the films on demand, while maintaining the cell viability. In addition, the processes were applied to the controlled release of an anticancer drug in the HeLa cells.