Solid-State Nuclear Magnetic Resonance Spectroscopy for Surface Characterization of Metal Oxide Nanoparticles: State of the Art and Perspectives

Metal oxide materials have found wide applications across diverse fields; in most cases, their functionalities are dictated by their surface structures and properties. A comprehensive understanding of the intricate surface features is critical for their further design, optimization, and applications, necessitating multi-faceted characterizations. Recent advances in solid-state nuclear magnetic resonance (ssNMR) spectroscopy have significantly extended its applications in the detailed analysis of multiple metal oxide nanoparticles, offering unparalleled atomic-level information on the surface structures, properties, and chemistries. Herein, we present an overview of the current state of the art from an NMR perspective. We begin with a brief introduction to contemporary ssNMR methodologies. Subsequently, we introduce and provide critical reviews on the applications of different ssNMR techniques in the detailed characterizations of the surface local structures, disorders, defects, active sites, and acidity on metal oxide nanoparticles, as well as the revelation of mechanisms behind some intriguing chemistries that occur on the surfaces, referencing representative recent studies. Finally, we address the challenges beyond the current status and provide perspectives on the future development and application of advanced ssNMR methodologies in this emerging field.

Three-component NiO/Fe3O4/rGO nanostructure as an electrode material towards supercapacitor and alcohol electrooxidation

A nanocomposite made of nickel oxide and iron oxide (NiO/Fe3O4) and its hybrid with reduced graphene oxide (rGO) as a conductive substrate with a highly functional surface (NiO/Fe3O4/rGO) was synthesized using a simple hydrothermal approach. This study addresses the challenge of developing efficient materials for energy storage and alcohol fuel cells. After confirming the synthesis through structural analysis, the potential of these nanocomposites as supercapacitor electrodes and catalysts for methanol and ethanol oxidation in alcohol fuel cells were evaluated. The synergy of combining the two metal oxides and adding rGO to the composite structure led to excellent electrocatalytic activity in alcohol oxidation. For the modified NiO/Fe3O4/rGO electrode in the methanol oxidation reaction (MOR), a current density of 450 mA/cm2 at 0.67 V and excellent catalyst stability of 98.7 % over 20 h in chronoamperometric analysis were observed. In the ethanol oxidation reaction (EOR), an oxidative current of 235 mA/cm2 at a peak potential of 0.76 V was seen, with catalyst stability of 96.4 % after 20 h. As a supercapacitor electrode, the NiO/Fe3O4 composite demonstrated a specific capacitance of 946 F/g, while NiO/Fe3O4/rGO showed 1155 F/g. The stability of these electrodes after 10000 GCD cycles was 83.6 % and 90.6 %, respectively. These findings suggest that the proposed structures are cost-effective and reliable alternatives for energy storage and production, suitable for alcohol fuel cells and supercapacitors.

Tuning of Oxygen Vacancies in Co3O4 Electrocatalyst for Effectiveness in Urea Oxidation and Water Splitting

The development of an excellent multifunctional electrocatalyst that is based on non-precious metal is critical for improving the electrochemical processes of the hydrogen evolution reaction (HER), the oxygen evolution reaction (OER), and the urea oxidation reaction (UOR) in alkaline media. This study demonstrates that incorporating Mo into Co3O4 facilitated the formation of rich oxygen vacancies (Vo), which promotes effective nitrate adsorption and activation in urea electrolysis. Subsequently, in situ/operando X-ray absorption spectroscopy is used to explore the active sites in Mo-Co3O4-3 under OER, indicating the oxygen vacancies are first filled with OH• in Mo-Co3O4; facilitated the pre-oxidation of low-valence Co, and promoted the reconstruction/deprotonation of intermediate Co-OOH•. Mo-Co3O4-3 electrocatalysts show impressive HER, OER, and UOR with low overpotentials of 141 mV, 220 mV, and 1.32 V, respectively, at 10 mA cm-2 in an alkaline medium. Furthermore, in situ/Operando Raman spectroscopy results reveal the importance of CoOOH active sites for enhanced electrochemical performance in Mo-Co3O4-3 compared to the pure Co3O4. The urea electrolyzer with Mo-Co3O4 electrocatalysts acts as an anode and the cathode delivers 1.42 V at 10 mA cm-2. A viable approach to creating effective UOR electrocatalysts involves synergistic engineering exploiting doping and oxygen vacancies.

Particle-Based Photoelectrodes for PEC Water Splitting: Concepts and Perspectives

This comprehensive review delves into the intricacies of the photoelectrochemical (PEC) water splitting process, specifically focusing on the design, fabrication, and optimization of particle-based photoelectrodes for efficient green hydrogen production. These photoelectrodes, composed of semiconductor materials, potentially harness light energy and generate charge carriers, driving water oxidation and reduction reactions. The versatility of particle-based photoelectrodes as a platform for investigating and enhancing various semiconductor candidates is explored, particularly the emerging complex oxides with compelling charge transfer properties. However, the challenges presented by many factors influencing the performance and stability of these photoelectrodes, including particle size, shape, composition, morphology, surface modification, and electrode configuration, are highlighted. The review introduces the fundamental principles of semiconductor photoelectrodes for PEC water splitting, presents an exhaustive overview of different synthesis methods for semiconductor powders and their assembly into photoelectrodes, and discusses recent advances and challenges in photoelectrode material development. It concludes by offering promising strategies for improving photoelectrode performance and stability, such as the adoption of novel architectures and heterojunctions.

Review of Anodic Tantalum Oxide Nanostructures: From Morphological Design to Emerging Applications

Anodization of transition metals, particularly the valve metals (V, W, Ti, Ta, Hf, Nb, and Zr) and their alloys, has emerged as a powerful tool for controlling the morphology, purity, and thickness of oxide nanostructures. The present review is focused on the advances in the synthesis of micro/nanostructures of anodic tantalum oxides (ATO) in inorganic, organic, and mixed inorganic-organic type electrolytes with critically highlighting anodization parameters, such as applied voltage, current, time, and electrolyte temperature. Particularly, the growth of ATO nanostructures in fluoride containing electrolytes and their applications are briefly covered. The details of the current- or voltage-time transient and its relation to the growth of the anodic oxide films are presented systematically. The main discussion revolves around the incorporation of various electrolyte species into the surface of ATO structures and its effects on their physicochemical properties. The latest progress in understanding the growth mechanism of nanoporous/nanotubular ATO structures is outlined. Additionally, the impact of annealing temperature (ranging from 400-1000 °C) and atmosphere on the crystalline structure, morphology, impurity content, and physical properties of the ATOs is briefly described. The common modification methods, such as decorating with other transition metal/metal oxide, heteroatom doping, or generating defects in the ATO structures, are discussed. Besides, the review also covers the most promising applications of these materials in the fields of capacitors, supercapacitors, memristive devices, corrosion protection, photocatalysis, photoelectrochemical (PEC) water splitting, and biomaterials. Finally, future research directions for designing ATO-based nanomaterials and their utilities are indicated.

Chemical bonding and electronic properties along Group 13 metal oxides

CONTEXT

The present work provides a systematic theoretical analysis of the nature of the chemical bond in Al2O3, Ga2O3, and In2O3 group 13 cubic crystal structure metal oxides. The influence of the functional in the resulting band gap is assessed. The topological analysis of the electron density provides unambiguous information about the degree of ionicity along the group which is linearly correlated with the band gap values and with the cost of forming a single oxygen vacancy. Overall, this study offers a comprehensive insight into the electronic structure of metal oxides and their interrelations. This will help researchers to harness information effectively, boosting the development of novel metal oxide catalysts or innovative methodologies for their preparation.

METHODS

Periodic density functional theory was used to predict the atomic structure of the materials of interest. Structure optimization was carried out using the PBE functional, using a plane wave basis set and the PAW representation of the atomic cores, using the VASP code. Next, the electronic properties were computed by carrying out single point calculations employing PBE, PBE + U functionals using VASP and also with PBE and the hybrid HSE06 functionals using the FHI-AIMS software. For the hybrid HSE06, the impact of the screening parameter, ω, and mixing parameter, α, on the calculated band gap has also been assessed.

Scalable solid-state synthesis of 2D transition metal oxide/graphene hybrid materials and their utilization for microsupercapacitors

Two-dimensional metal oxide (MO) nanostructures have unique properties compared with their bulk or 0D and 1D (nanoparticle and nanowire) counterparts. Their abundant surface area and atomically thin 2D structure are advantageous for their applications in catalysis and energy, as well as integration with 2D layered materials such as graphene and reduced graphene oxide (rGO). However, fast and scalable synthesis of 2D MOs and their nanocomposites remains challenging. Here, we developed a microwave-assisted solid-state synthesis method for the scalable generation of 2D MOs and 2D MO/rGO nanocomposites with tunable structure and composition. The structures and properties of 2D Fe2O3 and 2D ZnO as well as their nanocomposites with rGO were systematically investigated. The excellent electrochemical properties of such 2D MO/rGO nanocomposites also enable us to use them as electrode materials to fabricate microsupercapacitors. This work provides new insights into the scalable and solid-state synthesis of 2D nanocomposites and their potential applications in catalysis, energy conversion and storage.

Photocatalytic activity enhancement of nanostructured metal-oxides photocatalyst: a review

Nanostructured metal oxide semiconductors have emerged as promising nanoscale photocatalysts due to their excellent photosensitivity, chemical stability, non-toxicity, and biocompatibility. Enhancing the photocatalytic activity of metal oxide is critical in improving their efficiency in radical ion production upon optical exposure for various applications. Therefore, this review paper provides an in-depth analysis of the photocatalytic activity of nanostructured metal oxides, including the photocatalytic mechanism, factors affecting the photocatalytic efficiency, and approaches taken to boost the photocatalytic performance through structure or material modifications. This paper also highlights an overview of the recent applications and discusses the recent advancement of ZnO-based nanocomposite as a promising photocatalytic material for environmental remediation, energy conversion, and biomedical applications.

Advances in Hole Transport Materials for Layered Casting Solar Cells

Huge energy consumption and running out of fossil fuels has led to the advancement of renewable sources of power, including solar, wind, and tide. Among them, solar cells have been well developed with the significant achievement of silicon solar panels, which are popularly used as windows, rooftops, public lights, etc. In order to advance the application of solar cells, a flexible type is highly required, such as layered casting solar cells (LCSCs). Organic solar cells (OSCs), perovskite solar cells (PSCs), or dye-sensitive solar cells (DSSCs) are promising LCSCs for broadening the application of solar energy to many types of surfaces. LCSCs would be cost-effective, enable large-scale production, are highly efficient, and stable. Each layer of an LCSC is important for building the complete structure of a solar cell. Within the cell structure (active material, charge carrier transport layer, electrodes), hole transport layers (HTLs) play an important role in transporting holes to the anode. Recently, diverse HTLs from inorganic, organic, and organometallic materials have emerged to have a great impact on the stability, lifetime, and performance of OSC, PSC, or DSSC devices. This review summarizes the recent advances in the development of inorganic, organic, and organometallic HTLs for solar cells. Perspectives and challenges for HTL development and improvement are also highlighted.

Nonlinear optical properties in chiral copper oxide nanosheets

Chiral transition metal oxides (TMOs) are in the forefront of research as potential active materials in various optoelectronic applications. However, the nonlinear optical (NLO) properties of the chiral TMOs have not been fully understood. Here, several kinds of copper oxide nanosheets capped with different chiral amino acids are synthesized. Notably, we investigate the NLO activities of these materials, including broadband second harmonic generation and transformation of nonlinear optical properties from saturable absorption to reverse saturable absorption. This work will broaden the use of chiral TMO materials in nonlinear photonic devices.

Morphology Engineering of the Asymmetric PS-b-P4VP Block Copolymer: From Porous to Nanodot Oxide Structures

In the present work, we demonstrate the formation of oxide porous and nanodot structures from the same block copolymer (BCP) by the phase inversion of a BCP template. We investigated the effect of solvent annealing time on the ordering of asymmetric, cylinder forming, polystyrene-b-poly(4-vinylpyridine) (PS-b-P4VP) BCP. Phase separation of PS-b-P4VP was achieved by solvent vapor annealing (SVA) in a solvent atmosphere that is (partially) selective to P4VP to initially generate hexagonally arranged, cylindrical arrays of the expected structure. The morphology of the BCP changed from P4VP hexagonally packed cylinders to an 'inverse' structure with PS cylinders embedded in a P4VP matrix. This suggests that selective swelling occurs over time such that the swollen P4VP phase becomes the majority volume component. Metal ions (Ga3+, In3+) were infiltrated into the BCP templates by a solution-mediated infiltration approach, followed by an ultraviolet-ozone treatment to remove the polymer and oxidize the metallic ions to their oxides. The findings show that a single BCP can be used to create both metal oxide arrays and porous structures of metal oxides by simply varying the duration of the solvent annealing process. The resulting structures were analyzed through several methods including scanning electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy (XPS), transmission electron microscopy, and energy-dispersive X-ray spectroscopy. XPS analyses confirmed the complete elimination of the BCP template and the presence of metal oxides. This study provides important insights into the development of functional BCP materials with inverse structures.

Sonochemical Synthesized Manganese Oxide Nanoparticles as Fluorescent Sensor for Selenium (IV) Quantification. Application to Food and Drink Samples

Manganese oxide nanoparticles (MnO Nps), sonochemical synthesized and characterized in our laboratory, are proposed as fluorescent sensor for selenium (Se) determination. The new methodology has been developed based on the enhancing effect of the Se(IV) on fluorescent emission of MnO Nps. Experimental variables that influence on fluorimetric sensitivity were optimized. The calibration graph using zeroth order regression was linear from 0.189 ng L-1 to 8.00 × 103 µg L-1, with correlation coefficient better than 0.99. Under the optimal conditions, the limits of detection and quantification were of 0.062 ng L-1 and 0.189 ng L-1, respectively. The trueness of the methodology was assessed through standard addition method obtaining recovery near to 100%. This method showed good tolerance to foreign ions, particularly to Se(VI), and was applied to determination of Se(IV) trace in food and drink samples with satisfactory results. With the intention of preserving the environment from harmful effects, a degradation study of the used nanomaterials has been included for their subsequent disposal.

Transparent Electronics for Wearable Electronics Application

Recent advancements in wearable electronics offer seamless integration with the human body for extracting various biophysical and biochemical information for real-time health monitoring, clinical diagnostics, and augmented reality. Enormous efforts have been dedicated to imparting stretchability/flexibility and softness to electronic devices through materials science and structural modifications that enable stable and comfortable integration of these devices with the curvilinear and soft human body. However, the optical properties of these devices are still in the early stages of consideration. By incorporating transparency, visual information from interfacing biological systems can be preserved and utilized for comprehensive clinical diagnosis with image analysis techniques. Additionally, transparency provides optical imperceptibility, alleviating reluctance to wear the device on exposed skin. This review discusses the recent advancement of transparent wearable electronics in a comprehensive way that includes materials, processing, devices, and applications. Materials for transparent wearable electronics are discussed regarding their characteristics, synthesis, and engineering strategies for property enhancements. We also examine bridging techniques for stable integration with the soft human body. Building blocks for wearable electronic systems, including sensors, energy devices, actuators, and displays, are discussed with their mechanisms and performances. Lastly, we summarize the potential applications and conclude with the remaining challenges and prospects.

Metal Oxide Nanostructures (MONs) as Photocatalysts for Ciprofloxacin Degradation

In recent years, organic pollutants have become a global problem due to their negative impact on human health and the environment. Photocatalysis is one of the most promising methods for the removal of organic pollutants from wastewater, and oxide semiconductor materials have proven to be among the best in this regard. This paper presents the evolution of the development of metal oxide nanostructures (MONs) as photocatalysts for ciprofloxacin degradation. It begins with an overview of the role of these materials in photocatalysis; then, it discusses methods of obtaining them. Then, a detailed review of the most important oxide semiconductors (ZnO, TiO₂, CuO, etc.) and alternatives for improving their photocatalytic performance is provided. Finally, a study of the degradation of ciprofloxacin in the presence of oxide semiconductor materials and the main factors affecting photocatalytic degradation is carried out. It is well known that antibiotics (in this case, ciprofloxacin) are toxic and non-biodegradable, which can pose a threat to the environment and human health. Antibiotic residues have several negative impacts, including antibiotic resistance and disruption of photosynthetic processes.

Sol-gel synthesis of nanostructured cobalt oxide in four different ionic liquids

In this paper we report on the sol-gel synthesis of cobalt oxide in four different ionic liquids with two different cations and anions. The employed ionic liquids are; 1-ethyl-3-methylimidazolium trifluoromethylsulfonate ([EMIm]TfO), 1-butyl-1-methylpyrrolidinium trifluoromethylsulfonate ([Py1,4]TfO), 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([EMIm]TFSA), and 1-butyl-1-methylpyrrolidiniumbis(trifluoromethylsulfonyl)amide ([Py1,4]TFSA). The influence of the cation and anion of the ionic liquids on the morphology of the synthesized oxides was explored. The results showed that octahydron-shaped Co3O4 nanoparticles with different average sizes depending on the type of the employed ionic liquid. The imidazolium cation was found to play a significant role in reducing the particle size of the synthesized Co3O4 nanoparticles. The samples prepared in the imidazolium-based ionic liquids showed smaller particle sizes than those of the samples prepared in the pyrrolidinium-based ionic liquids. The shape of the particles of the synthesized Co3O4 was not affected by the type of the ionic liquids.

Graphical abstract

Rotheca serrata Flower Bud Extract Mediated Bio-Friendly Preparation of Silver Nanoparticles: Their Characterizations, Anticancer, and Apoptosis Inducing Ability against Pancreatic Ductal Adenocarcinoma Cell Line

Over past decades, the green method of synthesizing metal nanoparticles has acquired more attentiveness by scientific consensus because of its industrial and biomedical applications. This study focuses on the anti-proliferative effectiveness of AgNPs synthesized from Rotheca serrata (L.) Steane & Mabb. flower bud extract against the PANC-1 cell line in vitro. Various analytical instruments were utilized to visualize the formation of RsFb-AgNPs, such as UV-Vis spectroscopy, FT-IR, SEM, EDS, TEM, XRD, Zeta potential, and DLS analysis. The biosynthesis of RsFb-AgNPs was observed by a change in color and UV-Vis spectroscopy (415 nm). The FT-IR spectra exhibited the existence of many functional groups. XRD confirmed the crystallinity of the AgNPs. Morphology and elemental mapping were assessed by SEM and EDS analysis. The TEM micrograph revealed spherical-shaped particles with sizes ranging from 12 to 40 nm. Zeta potential and DLS analysis were used to measure surface charge and particle size. Biological properties, including the antioxidant, antimicrobial, and anticancer properties of synthesized RsFb-AgNPs, exhibited dose-dependent activities. In DPPH assay, synthesized RsFb-AgNPs inhibited the scavenging of free radicals in a dose-dependent manner. In addition, the resultant RsFb-AgNPs displayed moderate antimicrobial activity against tested pathogens. Further, the anti-proliferative efficacy of biosynthesized RsFb-AgNPs was determined against the PANC-1 cell line using the MTT assay. The results revealed a dose-dependent decrease in viability of cancer cells with an IC50 value of 36.01 µg/mL. Flow cytometry was then used to confirm the apoptotic effects by double staining with annexin V/PI. In response to the pancreatic ductal adenocarinoma cell line, the results showed notable early and late apoptosis cell population percentages. In conclusion, the synthesized RsFb-AgNPs revealed a potential anticancer agent that can induce apoptosis in the PANC-1 cells.

Nanomaterials as multimodal photothermal agents (PTAs) against 'Superbugs'

Superbugs, also known as multidrug-resistant bacteria, have become a lethal and persistent threat due to their unresponsiveness toward conventional antibiotics. The main reason for this is that superbugs can rapidly mutate and restrict any foreign drug/molecule in their vicinity. Herein, nanomaterial-mediated therapies have set their path and shown burgeoning efficiency toward the ablation of superbugs. Notably, treatment modalities like photothermal therapy (PTT) have shown prominence in killing multidrug-resistant bacteria with their ability to generate local heat shock-mediated hyperthermia in such species. However, photothermal treatment has some serious limitations, such as high cost, complexity, and even toxicity to some extent. Hence, it is important to resolve such shortcomings of PTTs as they provide substantial tissue penetration. This is why multimodal PTTs have emerged and taken over this domain of research for the past few years. In this work, we have summarized and critically reviewed such exceptional works of recent times and provided a perspective to enhance their efficiencies. Profoundly, we discuss the design rationales of some novel photothermal agents (PTAs) and shed light on their mechanisms. Finally, challenges for PTT-derived multimodal therapy are presented, and capable synergistic bactericidal prospects are anticipated.

MXene-based chemical gas sensors: Recent developments and challenges

The long-running Covid-19 pandemic has forced researchers across the globe to develop novel sensors and sensor materials for detecting minute quantities of biogenic viruses with high accuracy in a short period. In this context, MXene galleries comprising carbon/nitride two-dimensional nanolayered materials have emerged as excellent host materials in chemical gas sensors owing to their multiple advantages, including high surface area, high electrical conductivity, good thermal/chemical conductivity and chemical stability, composition diversity, and layer-spacing tunability; furthermore, they are popular in clinical, medical, food production, and chemical industries. This review summarizes recent advances in the synthesis, structure, and gas-sensing properties of MXene materials. Current opportunities and future challenges for obtaining MXene-based chemical gas sensors with high sensitivity, selectivity, response/recovery time, and chemical durability are addressed. This review provides a rational and in-depth understanding of the relationship between the gas-sensing properties of MXenes and structure/components, which will promote the further development of two-dimensional MXene-based gas sensors for technical device fabrication and industrial processing applications.

Recent advances in nanoparticles towards sustainability and their application in organic transformations in aqueous media

Nanoparticles (NPs) play a crucial role in organic transformation and are becoming increasingly attractive in the field of catalysis as they show good catalytic activity in organic as well as aqueous media. Numerous NPs have been utilized for several organic transformations in aqueous media, which have led to dedicated efforts for the complete coverage of the application of metal, metal oxide, bimetallic and supported NPs in water-mediated organic transformations in the last decades. This review aims to provide current highlights on the application of various types of metal NPs for organic transformations in aqueous media. The remarkable benefits associated with the catalytic application of NPs in water allows for various transformations to be performed under very mild and green conditions. Lastly, the author's perspectives are briefly considered, including future developments and crucial challenges in the ever-growing field of nanocatalysis.

Recent development and challenges in fuel cells and water electrolyzer reactions: an overview

Water electrolysis is the most promising method for the production of large scalable hydrogen (H2), which can fulfill the global energy demand of modern society. H2-based fuel cell transportation has been operating with zero greenhouse emission to improve both indoor and outdoor air quality, in addition to the development of economically viable sustainable green energy for widespread electrochemical applications. Many countries have been eagerly focusing on the development of renewable as well as H2-based energy storage infrastructure to fulfill their growing energy demands and sustainable goals. This review article mainly discusses the development of different kinds of fuel cell electrocatalysts, and their application in H2 production through various processes (chemical, refining, and electrochemical). The fuel cell parameters such as redox properties, cost-effectiveness, ecofriendlyness, conductivity, and better electrode stability have also been highlighted. In particular, a detailed discussion has been carried out with sufficient insights into the sustainable development of future green energy economy.

Photonic (computational) memories: tunable nanophotonics for data storage and computing

The exponential growth of information stored in data centers and computational power required for various data-intensive applications, such as deep learning and AI, call for new strategies to improve or move beyond the traditional von Neumann architecture. Recent achievements in information storage and computation in the optical domain, enabling energy-efficient, fast, and high-bandwidth data processing, show great potential for photonics to overcome the von Neumann bottleneck and reduce the energy wasted to Joule heating. Optically readable memories are fundamental in this process, and while light-based storage has traditionally (and commercially) employed free-space optics, recent developments in photonic integrated circuits (PICs) and optical nano-materials have opened the doors to new opportunities on-chip. Photonic memories have yet to rival their electronic digital counterparts in storage density; however, their inherent analog nature and ultrahigh bandwidth make them ideal for unconventional computing strategies. Here, we review emerging nanophotonic devices that possess memory capabilities by elaborating on their tunable mechanisms and evaluating them in terms of scalability and device performance. Moreover, we discuss the progress on large-scale architectures for photonic memory arrays and optical computing primarily based on memory performance.

Searching guidelines for scalable and controllable design of multifunctional materials and hybrid interfaces: Status and perspective

The urgent need to address the global sustainability issues that modern society is currently facing requires the development of micro and nanotechnologies, which rely largely on functional materials. Beyond studies focused solely on low-dimensional materials, broader research related to multifunctionality has shown that the major efforts to meet these criteria for new electronic, photonic, and optoelectronic concepts, particularly to achieve high-performance devices, are still challenging. By exploiting their unique properties, a comprehensive understanding of the implications of research for the synthesis and discovery of novel materials is obtained. The present article encompasses innovation research as an alternative optimization and design for sustainable energy development, bridging the scaling gap in atomically controlled growth in terms of surface heterogeneity and interfacial engineering. In addition, the corresponding research topics are widely regarded as a scientometric analysis and visualization for the evaluation of scientific contributions into the early 20 years of the 21st century. In this perspective, a brief overview of the global trends and current challenges toward high-throughput fabrication followed by a scenario-based future for hybrid integration and emerging structural standards of scalable control design and growth profiles are emphasized. Finally, these opportunities are unprecedented to overcome current limitations, creating numerous combinations and triggering new functionalities and unparalleled properties for disruptive innovations of Frontier technologies.

Electrospun carbon nanofibre-assisted patterning of metal oxide nanostructures

This work establishes carbon nanofibre-mediated patterning of metal oxide nanostructures, through the combination of electrospinning and vapor-phase transport growth. Electrospinning of a suitable precursor with subsequent carbonization results in the patterning of catalyst gold nanoparticles embedded within carbon nanofibres. During vapor-phase transport growth, these nanofibres allow preferential growth of one-dimensional metal oxide nanostructures, which grow radially outward from the nanofibril axis, yielding a hairy caterpillar-like morphology. The synthesis of metal oxide caterpillars is demonstrated using zinc oxide, indium oxide, and tin oxide. Source and substrate temperatures play the most crucial role in determining the morphology of the metal oxide caterpillars, whereas the distribution of the nanofibres also has a significant impact on the overall morphology. Introducing the current methodology with near-field electrospinning further facilitates user-defined custom patterning of metal oxide caterpillar-like structures.

Metallic Engineered Nanomaterials and Ocular Toxicity: A Current Perspective

The ocular surface, comprised of the transparent cornea, conjunctiva, and protective tear film, forms a protective barrier defending deeper structures of the eye from particulate matter and mechanical trauma. This barrier is routinely exposed to a multitude of naturally occurring and engineered nanomaterials (ENM). Metallic ENMs are particularly ubiquitous in commercial products with a high risk of ocular exposure, such as cosmetics and sunscreens. Additionally, there are several therapeutic uses for metallic ENMs owing to their attractive magnetic, antimicrobial, and functionalization properties. The increasing commercial and therapeutic applications of metallic ENMs come with a high risk of ocular exposure with poorly understood consequences to the health of the eye. While the toxicity of metallic ENMs exposure has been rigorously studied in other tissues and organs, further studies are necessary to understand the potential for adverse effects and inform product usage for individuals whose ocular health may be compromised by injury, disease, or surgical intervention. This review provides an update of current literature on the ocular toxicity of metallic ENMs in vitro and in vivo, as well as the risks and benefits of therapeutic applications of metallic ENMs in ophthalmology.

Laser ablation fabrication of ap-NiO/n-Si heterojunction for broadband and self-powered UV-Visible-NIR photodetection

We report on the optoelectronic characteristics ofp-NiO/n-Si heterojunction photodiode for broadband photodetection, fabricated by depositing ap-type NiO thin film onto a commercialn-type silicon substrate using pulsed laser deposition (PLD) technique. The structural properties of the PLD-grownp-NiO material were analysed by means of x-ray diffraction and x-ray photoelectron spectroscopy, confirming its crystalline nature and revealing the presence of Ni vacancies, respectively. Hall measurements confirmed thep-type semiconducting nature of the NiO thin film having a carrier concentration of 8.4 × 10¹⁶cm^-3. The current-voltage (I-V) characteristics of thep-NiO/n-Si heterojunction photodevice were investigated under different wavelengths ranging from UV to NIR. The self-bias properties under different illuminations of light were also explored systematically. Under self-bias condition, the photodiode exhibits excellent responsivities of 12.5 mA W^-1, 24.6 mA W^-1and 30.8 mA W^-1with illumination under 365 nm, 485 nm, and 850 nm light, respectively. In addition, the time dependency of the photoresponse of the fabricated photodevice has also been investigated and discussed thoroughly.

Nanotechnology-based approaches applied to nutraceuticals

Nutraceuticals and food industries are opening to a tremendously upcoming technology in the field of "Nano science". A new prospect has been defined by nanotechnology by conferring modified properties of nanomaterials and its application in the development of nanoformulations, nutritional supplements and food industry. Nanomaterials reveal exclusive properties because of their small size and high surface/volume ratio; thus, they have a complete application in nutraceuticals and food sector. In the existent review article, we obligate to present a comprehensive outline of the application of nanomaterials in development of advanced nano-based nutraceuticals with enhanced bioavailability, solubility, improved encapsulation efficiency, increased stability, sustained and targeted drug delivery, protection against degradation and microbial contamination and with improved pharmacological activity. It also highlights the importance of nanomaterials as nanosensors/nano-bio sensors for encapsulating peptides, antibodies, enzymes, etc. and in the food packaging industry and its future application. Thus, the review aims to focus on the benefits and new dimensions provided by nanomaterials and nanotechnology in health sectors by improving treatment strategies and quality of life.

Chemical conversion based on the crystal facet effect of transition metal oxides and construction methods for sharp-faced nanocrystals

In-depth research has found that the nanocrystal facet of transition metal oxides (TMOs) greatly affects their heterogeneous catalytic performance, as well as the property of photocatalysis, gas sensing, electrochemical reaction, etc. that are all involved in chemical conversion processes. Therefore, the facet-dependent properties of TMO nanocrystals have been fully and carefully studied by combining systematic experiments and theoretical calculations, and mechanisms of chemical reactions are accurately explained at the molecular level, which will be closer to the essence of reactions. Evidently, as an accurate investigation on crystal facets, well-defined TMO nanocrystals are the basis and premise for obtaining relevant credible results, and shape-controlled synthesis of TMO nanocrystals thereby has received great attention and development. The success in understanding of facet-dependent properties and shape-controlled synthesis of TMO nanocrystals is highly valuable for the control of reaction and the design of high-efficiency TMO nanocrystal catalysts as well as other functional materials in practical applications.

Sub-25 nm Inorganic and Dielectric Nanopattern Arrays on Substrates: A Block Copolymer-Assisted Lithography

A range of well-ordered inorganic (antimony, tin, and tungsten oxide) and dielectric (silica, alumina, and hafnia) nanoparticles and nanowire array patterns are created on substrates by a low-cost block copolymer (BCP) approach. A cylindrical-phase PS-b-PEO BCP is used as a template with hexagonally ordered perpendicular or parallel orientation of PEO cylinders. The solvent annealing parameters such as solvents, temperature, time, and so forth are optimized to achieve the desired patterns. An established BCP in situ inclusion protocol is utilized to achieve the material nanopatterns by spin coating the respective precursor ethanolic solution on the template followed by UV/ozone treatment for oxide conversion and polymer removal. Furthermore, the precursor solution concentrations and stirring times are calibrated to achieve isolated, well-ordered, and uniform-diameter and -thickness nanoparticles and nanowires. All of the material nanopatterns are mimicking the parent BCP nanopatterns. The phases of all of the nanopatterns are determined by X-ray photoelectron spectroscopy. The inorganic and dielectric nanopattern arrays are patterned on a graphoepitaxial substrate for device application.

Cobalt Iron Oxides Prepared by Acidic Redox-Assisted Precipitation: Characterization, Applications, and New Opportunities

The microscopic homogeneity of mixed metals in a single-phase oxide is a critical issue in improving material performance. Aqueous alkaline precipitation is the most common approach but it has the limits of microscopic inhomogeneity because of intrinsically different precipitation rates between metal cations. Herein, we demonstrate a new preparation of uniformly structural substituted cobalt iron oxides via acidic redox-assisted precipitation (ARP) upon the interaction of CoII and K2FeO4. This low-pH synthesis features the redox process between Co and Fe, presumably through the formation of inner-sphere complexes such as [(H2O)5CoII-O-FeVIO3]. With the nucleation starting from such complexes, one obtains a product with predominantly mixed-metal Co-O-Fe moieties, which improves the electrical conductivity of the product. This work further analyzes how the properties of the product species evolve during the hydrothermal synthesis step in the ARP process. We see that the Co/Fe ratio slowly increases from about 1:1 to a final value of 2:1, but does not reach the expected redox stoichiometry of 3:1. At the same time, the magnetization also increases, reaching a value of 16.9 emu g-1 for the final superparamagnetic product, which is three times higher than the value of monometallic Co3O4 and Fe2O3. The cobalt iron oxide samples obtained from ARP also possess superior oxygen evolution activity (307 mV overpotential at 10 mA cm-2 μg-1) compared to a mixture of Co3O4 and Fe2O3 (422 mV) or pure cobalt oxide (350 mV), highlighting the structure-induced enhancement of the catalytic activity. The difficult synthesis of evenly blended trinary/quaternary metals in a single-oxide phase may become possible in the future via ARP.

Morphology-dependent sensing performance of CuO nanomaterials

The morphology of nanomaterials affects their properties and further their applications. Herein, CuO nanomaterials with different morphologies are synthesized, including CuO nanostrips, nanowires and microspheres. After their characterization by means of electron microscopy and X-ray powder diffraction, these CuO nanomaterials are further mixed with graphene nanoplates (GNP) to explore their performance towards electrochemical detection of glucose and tetrabromobisphenol A (TBBPA). Among three composites, the composite of CuO nanostrips and GNP exhibits the largest active surface area, the lowest charge transfer resistance, and the highest accumulation efficiency toward TBBPA. Meanwhile, this composite based non-enzymatic sensor shows superior performance for the glucose monitoring. Since these sensors for the monitoring of both glucose and TBBPA possesses long-term stability, high reproducibility, and wide linear ranges and low detection limits, this work provides a strategy to tune the sensing performance of nanomaterials by means of tailoring the morphologies of nanomaterials.

Microstructure and Optical Properties of Nanostructural Thin Films Fabricated through Oxidation of Au-Sn Intermetallic Compounds

AuSn and AuSn₂ thin films (5 nm) were used as precursors during the formation of semiconducting metal oxide nanostructures on a silicon substrate. The nanoparticles were produced in the processes of annealing and oxidation of gold–tin intermetallic compounds under ultra-high vacuum conditions. The formation process and morphology of a mixture of SnO₂ and Au@SnO_x (the core–shell structure) nanoparticles or Au nanocrystalites were carefully examined by means of spectroscopic ellipsometry (SE), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) combined with energy-dispersive X-ray spectroscopy (EDX). The annealing and oxidation of the thin film of the AuSn intermetallic compound led to the formation of uniformly distributed structures with a size of ∼20–30 nm. All of the synthesized nanoparticles exhibited a strong absorption band at 520–530 nm, which is typical for pure metallic or metal oxide systems.

Electrical Transport and Magnetic Properties of Metal/Metal Oxide/Metal Junctions Based on Anodized Metal Oxides

In this paper, we describe magnetoelectric properties of metal/metal-oxide/metal junctions based on anodized metal oxides. Specifically, we use Ti and Fe metallic layers separated by the porous metal-oxides of iron or titanium formed by the anodization method. Thus, we prepare double junctions with at least one ferromagnetic layer and measure magnetoresistance, as well as their current-voltage and magnetic characteristics. We find that magnetoresistance depends on that junction composition and discuss the nature of differential resistance calculated from I-V characteristics. Our findings show that a top metallic layer and the interface between this layer and anodized oxide, where strong interatomic diffusion is expected, have the strongest influence on this observed behavior.

Metal Oxide-Based Photocatalytic Paper: A Green Alternative for Environmental Remediation

The interest in advanced photocatalytic technologies with metal oxide-based nanomaterials has been growing exponentially over the years due to their green and sustainable characteristics. Photocatalysis has been employed in several applications ranging from the degradation of pollutants to water splitting, CO2 and N2 reductions, and microorganism inactivation. However, to maintain its eco-friendly aspect, new solutions must be identified to ensure sustainability. One alternative is creating an enhanced photocatalytic paper by introducing cellulose-based materials to the process. Paper can participate as a substrate for the metal oxides, but it can also form composites or membranes, and it adds a valuable contribution as it is environmentally friendly, low-cost, flexible, recyclable, lightweight, and earth abundant. In term of photocatalysts, the use of metal oxides is widely spread, mostly since these materials display enhanced photocatalytic activities, allied to their chemical stability, non-toxicity, and earth abundance, despite being inexpensive and compatible with low-cost wet-chemical synthesis routes. This manuscript extensively reviews the recent developments of using photocatalytic papers with nanostructured metal oxides for environmental remediation. It focuses on titanium dioxide (TiO2) and zinc oxide (ZnO) in the form of nanostructures or thin films. It discusses the main characteristics of metal oxides and correlates them to their photocatalytic activity. The role of cellulose-based materials on the systems’ photocatalytic performance is extensively discussed, and the future perspective for photocatalytic papers is highlighted.

M. M. de Almeida J, Pastoriza-Santos I, C. C. Coelho L. Advances in Plasmonic Sensing at the NIR-A Review

Surface plasmon resonance (SPR) and localized surface plasmon resonance (LSPR) are among the most common and powerful label-free refractive index-based biosensing techniques available nowadays. Focusing on LSPR sensors, their performance is highly dependent on the size, shape, and nature of the nanomaterial employed. Indeed, the tailoring of those parameters allows the development of LSPR sensors with a tunable wavelength range between the ultra-violet (UV) and near infra-red (NIR). Furthermore, dealing with LSPR along optical fiber technology, with their low attenuation coefficients at NIR, allow for the possibility to create ultra-sensitive and long-range sensing networks to be deployed in a variety of both biological and chemical sensors. This work provides a detailed review of the key science underpinning such systems as well as recent progress in the development of several LSPR-based biosensors in the NIR wavelengths, including an overview of the LSPR phenomena along recent developments in the field of nanomaterials and nanostructure development towards NIR sensing. The review ends with a consideration of key advances in terms of nanostructure characteristics for LSPR sensing and prospects for future research and advances in this field.

Insights into colloidal nanoparticle-protein corona interactions for nanomedicine applications

Colloidal nanoparticles (NPs) have attracted significant attention due to their unique physicochemical properties suitable for diagnosing and treating different human diseases. Nevertheless, the successful implementation of NPs in medicine demands a proper understanding of their interactions with the different proteins found in biological fluids. Once introduced into the body, NPs are covered by a protein corona (PC) that determines the biological behavior of the NPs. The formation of the PC can eventually favor the rapid clearance of the NPs from the body before fulfilling the desired objective or lead to increased cytotoxicity. The PC nature varies as a function of the different repulsive and attractive forces that govern the NP-protein interaction and their colloidal stability. This review focuses on the phenomenon of PC formation on NPs from a physicochemical perspective, aiming to provide a general overview of this critical process. Main issues related to NP toxicity and clearance from the body as a result of protein adsorption are covered, including the most promising strategies to control PC formation and, thereby, ensure the successful application of NPs in nanomedicine.

Work Function Tuning in Hydrothermally Synthesized Vanadium-Doped MoO3 and Co3O4 Mesostructures for Energy Conversion Devices

The wide interest in developing green energy technologies stimulates the scientific community to seek, for devices, new substitute material platforms with a low environmental impact, ease of production and processing and long-term stability. The synthesis of metal oxide (MO) semiconductors fulfils these requirements and efforts are addressed towards optimizing their functional properties through the improvement of charge mobility or energy level alignment. Two MOs have rising perspectives for application in light harvesting devices, mainly for the role of charge selective layers but also as light absorbers, namely MoO3 (an electron blocking layer) and Co3O4 (a small band gap semiconductor). The need to achieve better charge transport has prompted us to explore strategies for the doping of MoO3 and Co3O4 with vanadium (V) ions that, when combined with oxygen in V2O5, produce a high work function MO. We report on subcritical hydrothermal synthesis of V-doped mesostructures of MoO3 and of Co3O4, in which a tight control of the doping is exerted by tuning the relative amounts of reactants. We accomplished a full analytical characterization of these V-doped MOs that unambiguously demonstrates the incorporation of the vanadium ions in the host material, as well as the effects on the optical properties and work function. We foresee a promising future use of these materials as charge selective materials in energy devices based on multilayer structures.

Copper Nitride Nanowire Arrays-Comparison of Synthetic Approaches

Copper nitride nanowire arrays were synthesized by an ammonolysis reaction of copper oxide precursors grown on copper surfaces in an ammonia solution. The starting Cu films were deposited on a silicon substrate using two different methods: thermal evaporation (30 nm thickness) and electroplating (2 μm thickness). The grown CuO or CuO/Cu(OH)₂ architectures were studied in regard to morphology and size, using electron microscopy methods (SEM, TEM). The final shape and composition of the structures were mostly affected by the concentration of the ammonia solution and time of the immersion. Needle-shaped 2–3 μm long nanostructures were formed from the electrodeposited copper films placed in a 0.033 M NH₃ solution for 48 h, whereas for the copper films obtained by physical vapor deposition (PVD), well-aligned nano-needles were obtained after 3 h. The phase composition of the films was studied by X-ray diffraction (XRD) and selected area electron diffraction (SAED) analysis, indicating a presence of CuO and Cu(OH)₂, as well as Cu residues. Therefore, in order to obtain a pure oxide film, the samples were thermally treated at 120–180 °C, after which the morphology of the structures remained unchanged. In the final stage of this study, Cu₃N nanostructures were obtained by an ammonolysis reaction at 310 °C and studied by SEM, TEM, XRD, and spectroscopic methods. The fabricated PVD-derived coatings were also analyzed using a spectroscopic ellipsometry method, in order to calculate dielectric function, band gap and film thickness.

Green biomimetic synthesis of Ag-TiO2 nanocomposite using Origanum majorana leaf extract under sonication and their biological activities

BACKGROUND

Studies of plant extract-mediated synthesis of nanoparticles is extensively explored and studied in recent time due to eco-friendly, cost-effectiveness and minimal use of toxic chemicals for synthesis. In this study, the synthesis of Ag-TiO2 nanocomposites (NCs) was carried out using Origanum majorana leaf extract under ultrasound irradiation. Origanum majorana leaf extract plays an important role as reducing and capping agent in synthesis of Ag-TiO2 nanocomposites (NCs). The antimicrobial activities of synthesised Ag-TiO2 NCs have been studied against Gram-positive and Gram-negative bacteria. In addition to this, the antioxidant activity of green Ag-TiO2 NCs was also evaluated on the basis of free radical scavenging activity against 1,1-diphenyl-2-picrylhydrazyl (DPPH), 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid (ABTS), and hydrogen peroxide free radicals.

RESULTS

Green-synthesised Ag-TiO2 NCs were successfully characterised on the basis of UV-Vis spectrophotometer, Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction analysis (XRD), scanning electron microscopy energy-dispersive X-ray spectroscopy (SEM-EDS) and transmission electron microscopy (TEM). The results revealed the spherical shape of nanocomposite with an average size 25-50 nm. The synthesised Ag-TiO2 NCs have showed significant antimicrobial activity against Escherichia coli, Bacillus subtilis and Aspergillus niger in comparison to TiO2 nanoparticles (NPs). The antioxidant evaluation of biomimetic synthesised Ag-TiO2 NCs also exhibited strong activity than TiO2 NPs and comparable to standard.

CONCLUSION

Green-synthesized Ag-TiO2 NCs provide a promising approach that can satisfy the requirement of large-scale industrial production bearing the advantage of low cost, eco-friendly and reproducible.

Unveiling the crystallographic origin of mechanochemically induced monoclinic to triclinic phase transformation in WO3

This study reports the anomalously stabilized low-temperature triclinic phase (δ-WO₃) during high energy ball milling (HEBM) of the monoclinic γ-WO₃ phase.

Unraveling the growth mechanism of W18O49 nanowires on W surfaces

This work unravels the solid-state growth mechanism of 1d W18O49 nanowires on W surfaces under a water vapor atmosphere. Such growth was understood to be the intermediate WO3 layer formation and its reduction induced planar faults driven 1d solid-state growth.