Advancements in emulsion systems for specialized infant formulas: Research process and formulation proposals for optimizing bioavailability of nutraceuticals

With the rapid advancements in nutrition and dietary management, infant formulas for special medical purposes (IFSMPs) have been developed to cater to the unique nutraceutical requirements of infants with specific medical conditions or physiological features. However, there are various challenges in effectively preserving and maximizing the health benefits of the specific nutraceuticals incorporated in IFSMPs. This review provides an overview of the nutritional compositions of various IFSMPs and highlights the challenges associated with the effective supplementation of specific nutraceuticals for infants. In addition, it emphasizes the promising potential of emulsion delivery systems, which possess both encapsulation and delivery features, to significantly improve the solubility, stability, oral acceptance, and bioavailability (BA) of nutraceutical bioactives. Based on this information, this work proposes detailed strategies for designing and developing model IFSMP emulsions to enhance the BA of specially required nutraceuticals. Key areas covered include emulsion stabilization, selective release mechanisms, and effective absorption of nutraceuticals. By following these proposals, researchers and industry professionals can design and optimize emulsion-based IFSMPs with enhanced health benefits. This review not only outlines the developmental states of IFSMP formulations but also identifies future research directions aimed at improving the physiological health benefits of IFSMPs. This effort lays the theoretical groundwork for the further development of emulsion-type IFSMP in infant formula (IF) industry, positioning the IF industry to better meet the complex needs of infants requiring specialized nutrition.

Advances in metabolism pathways of theaflavins: digestion, absorption, distribution and degradation

Theaflavins, a major kind of component in black tea, have been reported to show a variety of biological activities and health effects. However, the unstable chemical properties, low bioavailability and unclear metabolism pathways of theaflavins have left much to be desired in terms of its specific efficacy and applications. This paper provides a comprehensive knowledge on the digestion, absorption, metabolism, distribution and excretion of theaflavins. We find that pH-dependent stability, efflux transport proteins are closely related to the low absorption rate and low bioavailability of theaflavins. When pass through the gastrointestinal tract, TFDG, TF2A and TF2B are gradually degraded to TF1, and release gallic acid. Then, the theaflavins skeleton are degraded into small molecular phenolic substances under the action of enzymes and microorganisms. In addition, theaflavins are widely distributed in the human body including brain, lung, heart, kidney, liver, blood tissue in a low content and can be excreted through feces. However, the influence of digestive enzymes barrier and gut microbial barrier on theaflavins are still unclear. Importantly, most findings are reported by in vitro methods and animal experiments, the metabolites and metabolic pathways of theaflavins in human body are not fully understood and need to be further investigated. We hope to lay a theoretical basis for exploring methods to improve the bioavailability of theaflavins and expanding the application of theaflavins in health foods as well as pharmaceuticals.

Nanoemulsions containing amphotericin b and paromomycin for the treatment of cutaneous leishmaniasis

Cutaneous leishmaniasis (CL) is a vector-borne disease characterized by skin lesions that can evolve into high-magnitude ulcerated lesions. Thus, this study aimed to develop an innovative nanoemulsion (NE) with clove oil, Poloxamer® 407, and multiple drugs, such as amphotericin B (AmB) and paromomycin (PM), for use in the topical treatment of CL.

METHODS

Droplet size, morphology, drug content, stability, in vitro release profile, in vitro cytotoxicity on RAW 264.7 macrophages, and antileishmanial activity using axenic amastigotes of Leishmania amazonensis were assessed for NEs.

RESULTS

After optimizing the formulation parameters, such as the concentration of clove oil and drugs, using an experimental design, it was possible to obtain a NE with an average droplet size of 40 nm and a polydispersion index of 0.3, and these parameters were maintained throughout the 365 days. Furthermore, the NE showed stability of AmB and PM content for 180 days under refrigeration (4 °C), presented a pH compatible with the skin, and released modified AmB and PM. NE showed the same toxicity as free AmB and higher toxicity than free PM against RAW 264.7 macrophages. The same activity as free AmB, and higher activity than free PM against amastigotes L. amazonensis.

CONCLUSION

It is possible to develop a NE for the treatment of CL; however, complementary studies regarding the antileishmanial activity of NE should be carried out.

β-Cyclodextrin based Pickering emulsions for α-tocopherol delivery: Antioxidation stability and bioaccessibility

β-Cyclodextrin (β-CD) Pickering emulsion and cinnamaldehyde/β-cyclodextrin (CIN/β-CD) Pickering emulsion were prepared and the influences of oxidation and digestion were investigated. CIN/β-CD composite was better dispersed at the oil-water interface than β-CD. Hydrophobic group of CIN anchored in the oil phase and Hydrophilic hydroxyl group of β-CD extended into the aqueous phase, which allowed CIN/β-CD composite to be oriented at the oil-water interface and formed a more stable oil-water interface layer. β-CD Pickering emulsion was more susceptible to oxidative deterioration than CIN/β-CD Pickering emulsion, its malondialdehyde (MDA) value was as high as 509.41 ± 9.37 nmol/L. Digestion experiment indicated that CIN/β-CD Pickering emulsion was released inner oil phase in the small intestine and free fatty acid (FFA) release rate was 44.32 ± 1.08%. Pharmacokinetic parameters manifested that α-tocopherol peak concentration (Cmax) was 64.32 ± 6.45 mg/L and the peak time (Tmax) appeared at 5 h after administration of CIN/β-CD Pickering emulsion.

Designing healthier and more sustainable ultraprocessed foods

The food industry has been extremely successful in creating a broad range of delicious, affordable, convenient, and safe food and beverage products. However, many of these products are considered to be ultraprocessed foods (UPFs) that contain ingredients and are processed in a manner that may cause adverse health effects. This review article introduces the concept of UPFs and briefly discusses food products that fall into this category, including beverages, baked goods, snacks, confectionary, prepared meals, dressings, sauces, spreads, and processed meat and meat analogs. It then discusses correlations between consumption levels of UPFs and diet-related chronic diseases, such as obesity and diabetes. The different reasons for the proposed ability of UPFs to increase the risk of these chronic diseases are then critically assessed, including displacement of whole foods, high energy densities, missing phytochemicals, contamination with packaging chemicals, hyperpalatability, harmful additives, rapid ingestion and digestion, and toxic reaction products. Then, potential strategies to overcome the current problems with UPFs are presented, including reducing energy density, balancing nutritional profile, fortification, increasing satiety response, modulating mastication and digestion, reengineering food structure, and precision processing. The central argument is that it may be possible to reformulate and reengineer many UPFs to improve their healthiness and sustainability, although this still needs to be proved using rigorous scientific studies.

Nano vitamin E improved the antioxidant capacity of broiler chickens

Vitamin E (VE) is a potent nutritional antioxidant that is critical in alleviating poultry oxidative stress. However, the hydrophobic nature and limited stability of VE restrict its effective utilization. Nanotechnology offers a promising approach to enhance the bioavailability of lipophilic vitamins. The objective of this experiment was to investigate the effects of different sources and addition levels of VE on the growth performance, antioxidant capacity, VE absorption site, and pharmacokinetics of Arbor Acres (AA) broilers. Three hundred and eighty-four 1-d-old AA chicks were randomly allocated into four groups supplemented with 30 and 75 IU/kg VE as regular or nano. The results showed that dietary VE sources had no significant impact on broiler growth performance. However, chickens fed 30 IU/kg VE had a higher average daily gain at 22 to 42 d and 1 to 42 d, and lower feed conversion ratio at 22 to 42 d than 75 IU/kg VE (P < 0.05). Under normal feeding conditions, broilers fed nano VE (NVE) displayed significantly higher superoxide dismutase (SOD) activity and glutathione peroxidase (GSH-Px) enzyme activities and lower malonic dialdehyde (MDA) concentration (P < 0.05). Similarly, NVE had a higher antioxidant effect in the dexamethasone-constructed oxidative stress model. It was found that nanosizing technology had no significant effect on the absorption of VE in the intestinal tract by examining the concentration of VE in the intestinal tract (P > 0.05). However, compared to broilers perfused with regular VE (RVE), the NVE group displayed notably higher absorption rates at 11.5 and 14.5 h (P < 0.05). Additionally, broilers perfused with NVE showed a significant increase in the area under the concentration versus time curve from zero to infinity (AUC0-∞), mean residence time (MRT0-∞), elimination half-life (t1/2z), and peak concentration (Cmax) of VE in plasma (P < 0.05). In summary, nanotechnology provides more effective absorption and persistence of VE in the blood circulation for broilers, which is conducive to the function of VE and further improves the antioxidant performance of broilers.

Strategies to Enhance the Solubility and Bioavailability of Tocotrienols Using Self-Emulsifying Drug Delivery System

Tocotrienols have higher medicinal value, with multiple sources of evidence showing their biological properties as antioxidant, anti-inflammatory, and osteoprotective compounds. However, tocotrienol bioavailability presents an ongoing challenge in its translation into viable products. This is because tocotrienol oil is known to be a poorly water-soluble compound, making it difficult to be absorbed into the body and resulting in less effectiveness. With the potential and benefits of tocotrienol, new strategies to increase the bioavailability and efficacy of poorly absorbed tocotrienol are required when administered orally. One of the proposed formulation techniques was self-emulsification, which has proven its capacity to improve oral drug delivery of poorly water-soluble drugs by advancing the solubility and bioavailability of these active compounds. This review discusses the updated evidence on the bioavailability of tocotrienols formulated with self-emulsifying drug delivery systems (SEDDSs) from in vivo and human studies. In short, SEDDSs formulation enhances the solubility and passive permeability of tocotrienol, thus improving its oral bioavailability and biological actions. This increases its medicinal and commercial value. Furthermore, the self-emulsifying formulation presents a useful dosage form that is absorbed in vivo independent of dietary fats with consistent and enhanced levels of tocotrienol isomers. Therefore, a lipid-based formulation technique can provide an additional detailed understanding of the oral bioavailability of tocotrienols.

The Experimental Development of Emulsions Enriched and Stabilized by Recovering Matter from Spirulina Biomass: Valorization of Residue into a Sustainable Protein Source

Spirulina consists of a cluster of green-colored cyanobacteria; it is commonly consumed as a food or food supplement rich in bioactive compounds with antioxidant activity, predominantly C-phycocyanin (C-PC), which is related to anti-inflammatory action and anticancer potential when consumed frequently. After C-PC extraction, the Spirulina residual biomass (RB) is rich in proteins and fatty acids with the potential for developing food products, which is interesting from the circular economy perspective. The present work aimed to develop a vegan oil-in-water emulsion containing different contents of Spirulina RB, obtaining a product aligned with current food trends. Emulsions with 3.0% (w/w) of proteins were prepared with different chickpea and Spirulina RB ratios. Emulsifying properties were evaluated regarding texture and rheological properties, color, antioxidant activity, and droplet size distribution. The results showed that it was possible to formulate stable protein-rich emulsions using recovering matter rich in protein from Spirulina as an innovative food ingredient. All the concentrations used of the RB promoted the formulation of emulsions presenting interesting rheological parameters compared with a more traditional protein source such as chickpea. The emulsions were also a source of antioxidant compounds and maintained the color for at least 30 days after production.

Emulsion-Based Delivery Systems to Enhance the Functionality of Bioactive Compounds: Towards the Use of Ingredients from Natural, Sustainable Sources

In recent years, the trend in the population towards consuming more natural and sustainable foods has increased significantly. This claim has led to the search for new sources of bioactive compounds and extraction methods that have less impact on the environment. Moreover, the formulation of systems to protect these compounds is also focusing on the use of ingredients of natural origin. This article reviews novel, natural alternative sources of bioactive compounds with a positive impact on sustainability. In addition, it also contains information on the most recent studies based on the use of natural (especially from plants) emulsifiers in the design of emulsion-based delivery systems to protect bioactive compounds. The properties of these natural-based emulsion-delivery systems, as well as their functionality, including in vitro and in vivo studies, are also discussed. This review provides relevant information on the latest advances in the development of emulsion delivery systems based on ingredients from sustainable natural sources.

Supersaturating lipid-based solid dispersion of atazanavir provides enhanced solubilization and supersaturation in the digestive aqueous phase

Understanding and controlling the drug solubilization in digestive environment is of great importance in the design of lipid based solid dispersion (LBSD) for oral delivery of poorly aqueous soluble drugs. In the current study we determined the extent of drug solubilization and supersaturation of supersaturating lipid based solid dispersion which is governed by formulation variables like drug payload, lipid composition, solid carrier properties and lipid to solid carrier ratio. Initially, the impact of lipid chain length and drug payload on drug solubilization in lipid preconcentrate and dispersibility were evaluated to design liquid LbF of the model antiretroviral drug, atazanavir. The temperature induced supersaturation method enhanced the drug payload in medium chain triglyceride formulation at 60 °C. Further, the selected liquid supersaturated LbF was transformed into solid state LbF by employing different solid carriers including silica (Neusilin® US2 and Aerosil® 200), clay (Montmorillonite and Bentonite) and polymer (HPMC-AS and Kollidon® CL-M). The fabricated LBSDs were evaluated for solid state characterization to identify the physical nature of drug. In vitro digestion studies were conducted using pH-stat lipolysis method to assess the supersaturation propensity in aqueous digestive phase. Results revealed that LBSDs with silica and polymer carriers showed maximum drug solubilization throughout experiment compared to liquid LbF. The ionic interaction between drug-clay particles significantly reduced the ATZ partitioning from clay based LBSDs. LBSDs with dual purpose solid carrier like HPMC-AS and Neusilin® US2 offers the potential to improve drug solubilization of ATZ for physiologically relevant time. Lastly, we conclude that evaluation of formulation variables is crucial to achieve optimal performance of supersaturating LBSD.

Effects of dietary fat type and emulsification on carotenoid absorption: a randomized crossover trial

BACKGROUND

Although emerging evidence has suggested that the type and emulsification of dietary fat may be important to carotenoids absorption, these effects have not yet been validated in a human trial.

OBJECTIVE

This study aimed to examine the effects of dietary fat type and emulsification on the bioaccessibility and bioavailability of carotenoids from a carotenoids-rich salad.

METHODS

An identical salad was used for the in vitro and the human trial. This was paired with 28 g of one of the following four different fats: i) non-emulsified olive oil; ii) emulsified olive oil; (iv) non-emulsified coconut oil; v) emulsified coconut oil. The bioaccessibility of total carotenoids (TC) was assessed by a simulated in vitro digestion model. Sixteen subjects consumed salad with four test fats in random order, and plasma triglyceride and carotenoid (lutein, zeaxanthin, α-carotene, β-carotene, and lycopene) concentrations were determined hourly for 10 hours following the consumption. The absorption of TC and individual carotenoids were evaluated by the positive incremental area under the curve (iAUC) of plasma carotenoid concentrations.

RESULTS

The bioaccessibility of TC was greater with olive oil (24.0%) than with coconut oil (14.9%), and with the oil being emulsified (23.5%) rather than non-emulsified (15.4%). Likewise, the positive iAUC_1-10h of TC, α-carotene and lycopene were 55.2%, 110.8% and 45.8%, respectively, higher with olive oil than with coconut oil. Emulsified fat induced 40.0% greater positive iAUC_1-10h of TC than non-emulsified fat.

CONCLUSIONS

The type and emulsification of dietary fat are both essential to the carotenoid absorption. Findings from this study may provide scientific support for designing excipient emulsions as potential dietary strategies to optimize the absorption of fat-soluble compounds.

CLINICAL TRIAL REGISTRY

The present trial was registered at clinicaltrials.gov (NCT04323826), link: https://clinicaltrials.gov/ct2/show/NCT04323826.

Decrypting the Potential of Nanotechnology-Based Approaches as Cutting-Edge for Management of Hyperpigmentation Disorder

The abundant synthesis and accretion of melanin inside skin can be caused by activation of melanogenic enzymes or increase in number of melanocytes. Melasma is defined as hyperpigmented bright or dark brown spots which are symmetrically distributed and have serrated and irregular borders. The three general categories of pigmentation pattern include centro facial pattern, malar pattern, and mandibular pattern. Exposure to UV rays, heat, use of cosmetics and photosensitizing drugs, female sex hormonal therapies, aberrant production of melanocyte stimulating hormone, and increasing aesthetic demands are factors which cause the development of melasma disease. This review gives a brief overview regarding the Fitzpatrick skin phototype classification system, life cycle of melanin, mechanism of action of anti-hyperpigmenting drugs, and existing pharmacotherapy strategies for the treatment of melasma. The objectives of this review are focused on role of cutting-edge nanotechnology-based strategies, such as lipid-based nanocarriers, i.e., lipid nanoparticles, microemulsions, nanoemulsions, liposomes, ethosomes, niosomes, transfersomes, aspasomes, invasomes penetration-enhancing vesicles; inorganic nanocarriers, i.e., gold nanoparticles and fullerenes; and polymer-based nanocarriers i.e., polymeric nanoparticles, polymerosomes, and polymeric micelles for the management of hyperpigmentation.

Current Research on the Extraction, Functional Properties, Interaction with Polyphenols, and Application Evaluation in Delivery Systems of Aquatic-Based Proteins

Globally, aquatic processing industries pay great attention to the production of aquatic proteins for the fulfillment of the nutritive requirements of human beings. Aquatic protein can replace terrestrial animal protein due to its high protein content, complete amino acids, unique flavor, high quality and nutritional value, and requirements of religious preferences. Due to the superior functional properties, an aquatic protein based delivery system has been proposed as a novel candidate for improving the absorption and bioavailability of bioactive substances, which might have potential applications in the food industry. This review outlines the extraction techniques for and functional properties of aquatic proteins, summarizes the potential modification technologies for interaction with polyphenols, and focuses on the application of aquatic-derived protein in delivery systems as well as their interaction with the gastrointestinal tract (GIT). The extraction techniques for aquatic proteins include water, salt, alkali/acid, enzyme, organic solvent, and ultrasound-assisted extraction. The quality and functionality of the aquatic proteins could be improved after modification with polyphenols via covalent or noncovalent interactions. Furthermore, some aquatic protein based delivery systems, such as emulsions, gels, films, and microcapsules, have been reported to enhance the absorption and bioavailability of bioactive substances by in vitro GIT, cell, and in vivo animal models. By promoting comprehensive understanding, this review is expected to provide a real-time reference for developing functional foods and potential food delivery systems based on aquatic-derived proteins.

Docosahexaenoic Acid Delivery Systems, Bioavailability, Functionality, and Applications: A Review

Docosahexaenoic acid (DHA), mainly found in microalgae and fish oil, is crucial for the growth and development of visual, neurological, and brain. In addition, DHA has been found to improve metabolic disorders associated with obesity and has anti-inflammatory, anti-obesity, and anti-adipogenesis effects. However, DHA applications in food are often limited due to its low water solubility, instability, and poor bioavailability. Therefore, delivery systems have been developed to enhance the remainder of DHA activity and increase DHA homeostasis and bioavailability. This review focused on the different DHA delivery systems and the in vitro and in vivo digestive characteristics. The research progress on cardiovascular diseases, diabetes, visual, neurological/brain, anti-obesity, anti-inflammatory, food applications, future trends, and the development potential of DHA delivery systems were also reviewed. DHA delivery systems could overcome the instability of DHA in gastrointestinal digestion, improve the bioavailability of DHA, and better play the role of its functionality.

Effect of Gum Acacia on the Intestinal Bioavailability of n-3 Polyunsaturated Fatty Acids in Rats

Lipid emulsification is a technique that is being explored for improving the bioavailability of omega 3 (n-3) long chain (LC) fatty acid (FA). The nature of the emulsifiers can differently impact the lipid bioavailability via a modification of the lipolysis step. Among natural emulsifiers, gum acacia (GA), an indigestible polysaccharide, provides protective encapsulation of n-3 by forming a specifically crown-like shape around lipid drops, which could also impact the digestion step. Despite the interest in lipolysis rate, the impact of GA on lipid bioavailability has never been explored in a complete physiological context. Thus, we followed in a kinetics study the n-3 bioavailability in rat lymph, orally administered DHA-rich oil, formulated based on GA compared to the bulk phase form of the oil. The AUC values were significantly improved by +121% for total TG and by 321% for n-3 PUFA, specifically for EPA (+244%) and for DHA (+345%). Benefits of GA have also been related to the transport of FA in lymph, which was 2 h earlier (Tmax = 4 h), compared to the Tmax (6 h) obtained with the bulk phase oil. All the data showed that GA is one of the most favorable candidates of natural emulsifiers to improve n-3 bioavailability and their rate of absorption for health targets.

Nano-enabled plant-based colloidal delivery systems for bioactive agents in foods: Design, formulation, and application

Consumers are becoming increasingly aware of the impact of their dietary choices on the environment, animal welfare, and health, which is causing many of them to adopt more plant-based diets. For this reason, many sectors of the food industry are reformulating their products to contain more plant-based ingredients. This article describes recent research on the formation and application of nano-enabled colloidal delivery systems formulated from plant-based ingredients, such as polysaccharides, proteins, lipids, and phospholipids. These delivery systems include nanoemulsions, solid lipid nanoparticles, nanoliposomes, nanophytosomes, and biopolymer nanoparticles. The composition, size, structure, and charge of the particles in these delivery systems can be manipulated to create novel or improved functionalities, such as improved robustness, higher optical clarity, controlled release, and increased bioavailability. There have been major advances in the design, assembly, and application of plant-based edible nanoparticles within the food industry over the past decade or so. As a result, there are now a wide range of different options available for creating delivery systems for specific applications. In the future, it will be important to establish whether these formulations can be produced using economically viable methods and provide the desired functionality in real-life applications.

Saponins as Natural Emulsifiers for Nanoemulsions

The awareness of sustainability approaches has focused attention on replacing synthetic emulsifiers with natural alternatives when formulating nanoemulsions. In this context, a comprehensive review of the different types of saponins being successfully used to form and stabilize nanoemulsions is presented, highlighting the most common natural sources and biosynthetic routes. Processes for their extraction and purification are also reviewed altogether with the recent advances for their characterization. Concerning the preparation of the nanoemulsions containing saponins, the focus has been initially given to screening methods, lipid phase used, and production procedures, but their characterization and delivery systems explored are also discussed. Most experimental outcomes showed that the saponins present high performance, but the challenges associated with the saponins' broader application, mainly the standardization for industrial use, are identified. Future perspectives report, among others, the emerging biotechnological processes and the use of byproducts in a circular economy context.

Black pepper and vegetable oil-based emulsion synergistically enhance carotenoid bioavailability of raw vegetables in humans

This study demonstrated the combination of black pepper and a canola oil-based emulsion synergistically enhanced carotenoid bioavailability of raw vegetables in humans. In a randomized crossover design, healthy young adults consumed (1) vegetable salad (control), (2) salad with canola oil emulsion (COE), (3) salad with black pepper (BP), and (4) salad with canola oil emulsion and black pepper (COE + BP). COE + BP led to a higher AUC_0-10h of total plasma carotenoids (p < 0.0005) than the control (6.1-fold), BP (2.1-fold), and COE (3.0-fold). COE + BP increased AUC_0-10h of plasma lutein, α-carotene, β-carotene, and lycopene by 4.8, 9.7, 7.6, and 5.5-fold than the control, respectively (p < 0.0001). COE + BP produced a significant synergy in increasing both C_max and AUC_0-10h of total carotenoids, α-carotene, β-carotene, and lycopene. Moreover, COE + BP produced a stronger enhancement on AUC_0-10h of total carotenoids, α-carotene, β-carotene, and lycopene in females than in males.

Natural self-emulsifying reversible hybrid-hydrogel delivery (N'SERH) of tocopherol enhances bioavailability and modulates alcohol-induced reproductive toxicity in rats

Alpha-tocopherol (α-Toc), an antioxidant vitamin, has been widely prescribing in the treatment of infertility, in spite of its limited oral bioavailability. The present study describes the enhanced bioavailability and efficacy of a novel 'natural self-emulsifying reversible hydrogel' (N'SERH)-based oral delivery form of α-Toc-rich sunflower oil (Tα-fen) using fenugreek galactomannan hydrogel scaffold (hybrid-FENUMATTM ). Tα-fen was characterised by FTIR, SEM, TEM and DLS as a hybrid-hydrogel powder. The bioavailability study on thirty (n = 30) male Sprague Dawley rats randomised into two groups indicated 4.84-fold increase in the oral bioavailability when the formulation was provided at 15 mg/kg b. wt. of α-Toc by oral gavage. The efficacy study on 24 animals randomised into four groups as control, ethanol treated (4 mg/kg b. wt.), ethanol+unformulated, UTα (15 mg/kg b. wt.) and ethanol+formulation, Tα-fen (15 mg/kg b. wt.) revealed significant improvement (*p < 0.05) and reversal of alcohol-induced reproductive toxicity as evident from the enhanced sperm count, motility and viability parameters, testosterone levels, fructose content, and SDH activity and plasma antioxidant status among Tα-fen-treated rats, compared with unformulated, UTα-treated group. Histopathology further confirmed the reversal of the alterations in the testes morphology of Tα-fen-treated animals, indicating its promising potential in the treatment of reproductive health issues.

Edible coatings as osmotic dehydration pretreatment in nutrient-enhanced fruit or vegetable snacks development: A review

Edible coatings (ECs) are thin layers applied on food to protect it and improve quality. They are made from bio-based materials such as polysaccharides, proteins, lipids, or their composites. The incorporation of functional agents, such as bioactive compounds, vitamins, or antimicrobials into the EC, has been investigated to control the shelf life of many food products from horticulture ones to processed food. Osmotic dehydration (OD) as a mild technology may also positively impact the availability of innovative fruit snacks and consequently influence consumer health. Combination of the EC with the OD aims to remove water through the semipermeable membrane while limiting the transfer of solutes from the dehydrated tissue and in the opposite direction from the osmotic solution to the food. The development trend of the snack market is expanding, especially with health-promoting properties. Consumers pay increasing attention to quality of food and its beneficial effects on health. This review attempts to provide the advancement of recent studies on the application of the EC before the OD of different fresh or fresh-cut fruit and vegetables. A fundamental theory related to the methodology of creating the EC, their composition, and the influence on the physicochemical properties of products that are osmo-dehydrated to a medium water content or additionally dried to a low water content have been described. Efforts have been exerted to introduce hydrocolloids used in the production of the EC, including new sources of biopolymers such as agricultural waste and by-products. The perspectives of using ECs in the technology of producing pro-healthy snacks are emphasized.

Lipid-Based Nanocarrier System for the Effective Delivery of Nutraceuticals

Nutraceuticals possess several health benefits and functions; however, most nutraceuticals are prone to degradation in the gastrointestinal environment and have poor bioavailability. Application of a novel carrier system is of increasing importance to overcome obstacles and provide efficient applicability. Lipid-based nanocarriers provide a large surface-to-mass ratio, enhanced intestinal absorption by solubilization in the intestinal milieu, intestinal lymphatic transport, and altering enterocyte-based transport. A critical overview of the current limitation, preparation, and application of lipid-based nanocarriers (liposomes and niosomes) and lipid nanoparticles (SLNs and NLCs) is discussed. Physical and gastrointestinal stability and bioavailability of nanoencapsulated nutraceuticals are considered as well.

Structured edible lipid-based particle systems for oral drug-delivery

Oral administration is the most popular and patient-compliant route for drug delivery, though it raises great challenges due to the involvement of the gastro-intestine (GI) system and the drug bioavailability. Drug bioavailability is directly related to its ability to dissolve, transport and/or absorb through the physiological environment. A great number of drugs are characterized with low water solubility due to their hydrophobic nature, thus limiting their oral bioavailability and clinical use. Therefore, new strategies aiming to provide a protective shell through the GI system and improve drug solubility and permeability in the intestine were developed to overcome this limitation. Lipid-based systems have been proposed as good candidates for such a task owing to their hydrophobic nature which allows high drug loading, drug micellization ability during intestinal digestion due to the lipid content, and the vehicle physical protective environment. The use of edible lipids with high biocompatibility paves the bench-to-bedside translation. Four main types of structured lipid-based drug delivery systems differing in the physical state of the lipid phase have been described in the literature, namely emulsions, solid lipid nanoparticles, nanostructured lipid carriers, and oleogel-based particles. The current review provides a comprehensive overview of the different structured edible lipid-based oral delivery systems investigated up to date and emphasizes the contribution of each system component to the delivery performance, and the oral delivery path of lipids.

The impact of emulsion droplet size on in vitro lipolysis rate and in vivo plasma uptake kinetics of triglycerides and vitamin D3 in rats

Emulsions play an important role in the process of triglyceride (TG) digestion (lipolysis). Through emulsification, the oil-water interface is increased by orders of magnitude. This often leads to faster and more efficient lipolysis, which is potentially beneficial for the intestinal uptake of oils and lipophilic compounds. In this paper, we first examined the effect of emulsion droplet size on the in vitro lipolysis rate. Then an in vivo experiment was performed, to examine the plasma uptake kinetics of TGs and vitamin D₃ (vitD₃) over a 24 hours period after oral administration of the emulsions in rats. Basic corn oil emulsions loaded with vitD₃ were prepared using polysorbate 80 as the emulsifier, with three different droplet sizes (D[3,2]): ∼3 μm (large), ∼1 μm (medium) and ∼0.3 μm (small). In vitro lipolysis experiments showed, as expected, that smaller droplets were lipolyzed more rapidly. However, the medium emulsion had by far the highest rate of lipolysis per surface area. This was attributed to bile salt limitation, polysorbate 80 lipolysis inhibition and TG digestion product accumulation. In vivo, the two smallest emulsions showed the highest uptake (C_max and AUC) of vitD₃ and TG, while the largest emulsion and bulk oil control showed lower values. However, only the (incremental) TG plasma values and kinetics displayed some statistically significant differences. These findings may have relevance for the formulation of functional foods/beverages or delivery units containing oils or lipophilic bioactives.

Formulation and characterization of catechin-loaded proniosomes for food fortification

BACKGROUND

To overcome the problems associated with niosomes, proniosomes - a dry powder - was prepared to nanoencapsulate catechins using Span 60 as surfactant, cholesterol as stabilizer and maltodextrin, lactose monohydrate and pullulan as wall materials. The proniosomes were made by the thin-film hydration technique, and were characterized for fortification in milk beverages. Scanning and atomic force microscopic images showed the varying morphology and ultrastructure of the proniosomes. The mean hydrodynamic diameter of 193.57-262.52 nm, polydispersity index of 0.24-0.25 and zeta potential of -15.8 to -24.73 were suggestive of the size, homogeneity and stability of the catechin-loaded proniosomes. X-ray powder diffractograms and Fourier transform infrared (FTIR) spectra provided insight about the interaction between catechins and wall materials. Entrapment efficiency and in vitro release were calculated to determine the extent of nanoencapsulation of catechins and their bioavailability, respectively. The nanoencapsulates were fortified in milk and yogurt to find their organoleptic acceptability.

RESULTS

Moisture content was found to be 20-30 g kg^-1 , indicating longer stability of the proniosomes. Scanning electron microscopic and atomic force microscopic images revealed the ultrastructure and spherical-shaped morphology of proniosomes. Entrapment efficiency of catechins using pullulan as wall material was as high as 83.43%. In vitro release studies revealed the sustained release of catechins from the proniosomes. FTIR and X-ray diffraction spectra revealed the absence of chemical interactions between catechins and encapsulants.

CONCLUSION

Food-grade proniosomes are a good vehicle for fortification of milk and yogurt without noticeable adverse changes in their organoleptic and physicochemical properties, thus increasing the potential for bioavailability of catechins in the gastrointestinal tract. © 2020 Society of Chemical Industry.

Advances in edible nanoemulsions: Digestion, bioavailability, and potential toxicity

The design, fabrication, and application of edible nanoemulsions for the encapsulation and delivery of bioactive agents has been a highly active research field over the past decade or so. In particular, they have been widely used for the encapsulation and delivery of hydrophobic bioactive substances, such as hydrophobic drugs, lipids, vitamins, and phytochemicals. A great deal of progress has been made in creating stable edible nanoemulsions that can increase the stability and efficacy of these bioactive agents. This article highlights some of the most important recent advances within this area, including increasing the water-dispersibility of bioactives, protecting bioactives from chemical degradation during storage, increasing the bioavailability of bioactives after ingestion, and targeting the release of bioactives within the gastrointestinal tract. Moreover, it highlights progress that is being made in creating plant-based edible nanoemulsions. Finally, the potential toxicity of edible nanoemulsions is considered.

Pharmacology and Pharmacokinetics of Vitamin E: Nanoformulations to Enhance Bioavailability

Vitamin E belongs to the family of lipid-soluble vitamins and can be divided into two groups, tocopherols and tocotrienols, with four isomers (alpha, beta, gamma and delta). Although vitamin E is widely known as a potent antioxidant, studies have also revealed that vitamin E possesses anti-inflammatory properties. These crucial properties of vitamin E are beneficial in various aspects of health, especially in neuroprotection and cardiovascular, skin and bone health. However, the poor bioavailability of vitamin E, especially tocotrienols, remains a great limitation for clinical applications. Recently, nanoformulations that include nanovesicles, solid-lipid nanoparticles, nanostructured lipid carriers, nanoemulsions, and polymeric nanoparticles have shown promising outcomes in improving the efficacy and bioavailability of vitamin E. This review focuses on the pharmacological properties and pharmacokinetics of vitamin E and current advances in vitamin E nanoformulations for future clinical applications. The limitations and future recommendations are also discussed in this review.

Impact of bile salts and a medium chain fatty acid on the physical properties of self-emulsifying drug delivery systems

The aim of this study was the evaluation of the influence of bile salts and fatty acids, important components of intestinal fluids, on physical characteristics of self-emulsifying drug delivery systems (SEDDS) such as size, polydispersity (PDI), zeta potential (Zp), turbidity (T%), cloud point temperature (CPT) and drug release. At this purpose, nonionic (ni-SEDDS) and cationic (c-SEDDS) were emulsified in aqueous media containing increasing concentrations of bile salts (BS) and decanoate (Dec). Zp of ni-SEDDS and c-SEDDS became highly negative at 15 mM BS and Dec. Size of ni-SEDDS decreased of 112 nm and of 76 nm at 15 mM BS and Dec, respectively. Size of c-SEDDS decreased of 53 nm at 15 mM BS, but it was not affected by 15 mM Dec. PDI and T% of ni- and c-SEDDS were lowered as well. CPT of ni-SEDDS increased from 70 °C to 97 °C and 84 °C at 15 mM BS and Dec. CPT of c-SEDDS decreased from above 100 °C to 80 °C and to 85 °C at 1.5 mM BS and at 5 mM Dec, respectively. Generally, BS had a more pronounced effect on SEDDS Zp, size, PDI, T %, and CPT than Dec. The release of the model drug quinine was accelerated by BS and Dec. As BS and fatty acids affect the physical characteristics and drug release behavior of SEDDS, their impact should be addressed during the development process.

Potential of Nanonutraceuticals in Increasing Immunity

Nutraceuticals are defined as foods or their extracts that have a demonstrably positive effect on human health. According to the decision of the European Food Safety Authority, this positive effect, the so-called health claim, must be clearly demonstrated best by performed tests. Nutraceuticals include dietary supplements and functional foods. These special foods thus affect human health and can positively affect the immune system and strengthen it even in these turbulent times, when the human population is exposed to the COVID-19 pandemic. Many of these special foods are supplemented with nanoparticles of active substances or processed into nanoformulations. The benefits of nanoparticles in this case include enhanced bioavailability, controlled release, and increased stability. Lipid-based delivery systems and the encapsulation of nutraceuticals are mainly used for the enrichment of food products with these health-promoting compounds. This contribution summarizes the current state of the research and development of effective nanonutraceuticals influencing the body's immune responses, such as vitamins (C, D, E, B12, folic acid), minerals (Zn, Fe, Se), antioxidants (carotenoids, coenzyme Q10, polyphenols, curcumin), omega-3 fatty acids, and probiotics.

Nanoemulsion composed of 10-(4,5-dihydrothiazol-2-yl)thio)decan-1-ol), a synthetic analog of 3-alkylpiridine marine alkaloid: development, characterization, and antimalarial activity

Malaria treatment is based on a reduced number of antimalarial drugs, and drug resistance has emerged, leading to the search for new antimalarial drugs incorporated into pharmaceutical formulations. In this study, 10-(4,5-dihydrothiazol-2-yl)thio)decan-1-ol) (thiazoline), a synthetic analog of 3-alkylpiridine marine alkaloid, and a potent antimalarial substance, was incorporated into O/W nanoemulsion. This formulation was prepared by a 2³ factorial design. It was characterized by globule diameter, polydispersity index, zeta potential, encapsulation efficiency, in vitro thiazoline release at pH 2 and 6.86, and accelerated stability. In vitro and in vivo antimalarial activity was determined against P. falciparum and P. berghei, respectively. Thiazoline nanoemulsion showed 248.8 nm of globule diameter, 0.236 of polydispersity index, -38.5 mV of zeta potential, 96.92% encapsulation efficiency, and it was stable for 6 months. Thiazoline release profiles differed in acidic and neutral media, but in both cases, the nanoemulsion controlled and prolonged the thiazoline delivery. Thiazoline nanoemulsion exerted in vitro antimalarial activity against the parasite (IC₅₀ = 1.32 µM), and it significantly reduced the in vivo parasitemia for 8 days without increasing the survival time of animals. Therefore, the thiazoline nanoemulsion represents a strategy to treat malaria combining an antimalarial candidate and a new nanocarrier.

Nano Encapsulated Curcumin: And Its Potential for Biomedical Applications

Curcumin, a yellow-colored polyphenol extracted from the rhizome of turmeric root, is commonly used as a spice and nutritional supplement. It exhibits many pharmacological activities such as anti-inflammatory, anti-bacterial, anti-cancer, anti-Alzheimer, and anti-fungal. However, the therapeutic application of curcumin is limited by its extremely low solubility in aqueous buffer, instability in body fluids, and rapid metabolism. Nano delivery system has shown excellent potential to improve the solubility, biocompatibility and therapeutic effect of curcumin. In this review, we focus on the recent development of nano encapsulated curcumin and its potential for biomedical applications.

Preparation, Physicochemical Characterisation and DoE Optimisation of a Spray-Dried Dry Emulsion Platform for Delivery of a Poorly Soluble Drug, Simvastatin

In the presented study, insight into the development and optimisation of the dry emulsion formulation and spray drying process is provided. The aim was to facilitate the dissolution of the poorly soluble, highly lipophilic drug, simvastatin, by forming spray-dried dry emulsion particles having adequate powder flow properties, while assuring sufficient drug content. Simvastatin and a mixture of caprylic, capric triglyceride and 1-oleoyl-rac-glycerol were employed as a model drug and solubilising oils, respectively. A matrix of the dry emulsions was composed at a fixed ratio mixture of mannitol and HPMC. Tween 20 was used in low amounts as the primary emulsion stabiliser. To facilitate process optimisation, a DoE surface response design was used to study the influence of formulation and process parameters on the particle size distribution, powder bulk properties, emulsion reconstitution ability, drug stability and process yield of spray-dried products. Two-fluid nozzle geometry was identified, studied and confirmed to be important for most product critical quality attributes. Models obtained after the study showed acceptable coefficients of determination and provided good insight in the relationship governing the process and product characteristics. Five model optimised products showed adequate process yield, suitable particle size distribution, good reconstitution ability and improved dissolution profile, when compared to a non-lipid-based tablet and the pure drug. However, the obtained dry emulsion powders exhibited poor flow character according to the Carr index. The optimised product was further analysed with NMR during lipolysis to gain insight into the species formed during digestion and the kinetics of their formation.

Phytosomes with Persimmon (Diospyros kaki L.) Extract: Preparation and Preliminary Demonstration of In Vivo Tolerability

Persimmon (Diospyros kaki L.), a fruit rich in phenolic compounds (PCs), has been considered effective in mitigating oxidative damage induced by an excess of reactive oxygen species. Due to large molecular weight and intrinsic instability in some physiological fluids, PCs’ passage through biological membranes is very limited. Carriers like phytosomes are promising systems to optimize oral absorption of encapsulated extracts. This work prepared and fully characterized phytosomes containing bioactive phenolic extracts from persimmon in terms of size, surface charge, encapsulation efficiency and stability over six months. These phytosomes were orally dosed to Wistar rats during a 15-day period. Afterwards, haematological and biochemical analyses were performed. Monodisperse phytosomes were successfully prepared, with size less than 300nm (PI < 0.3) and high encapsulation efficiency (97.4%) of PCs. In contrast to free extract, extract-loaded phytosomes had higher antioxidant activity after 6 months storage. Oral administration of extract-loaded phytosomes and free extract did not lead to lipidic profile changes and were within referenced normal ranges, as well as glycaemia levels and urine parameters. The results highlighted the potential of persimmon PCs as food supplements or pharmacological tools, suggesting a promising and safe phytosomal formulation containing bioactive agents of persimmon that could lead to health benefits.

Fabrication of plant-based vitamin D3-fortified nanoemulsions: influence of carrier oil type on vitamin bioaccessibility

The influence of carrier oil type (corn, fish, or flaxseed oil) on the production, stability, and simulated gastrointestinal behavior of vitamin-fortified nanoemulsions was studied. The nanoemulsions were formulated using pea protein as an emulsifier since there is increasing interest in substituting artificial and animal-based food ingredients with natural plant-based alternatives. Lipid digestion and vitamin D3 bioaccessibility were measured when the nanoemulsions were subjected to a three-stage in vitro gastrointestinal tract: oral, gastric, and small intestinal. The majority of all three lipids were digested within the first few minutes in the simulated small intestine, with the corn oil nanoemulsions being digested faster than the fish or flaxseed oils. Moreover, a greater fraction of triglycerides were digested by the end of the small intestine for the corn oil than for the fish and flaxseed oils. For the different carrier oils, vitamin bioaccessibility was ranked: corn oil > flaxseed oil ≈ fish oil. These results suggest that monounsaturated-rich oils (such as corn oil) are better for encapsulating and delivering vitamin D3 than polyunsaturated-rich ones (such as flaxseed or fish oil). The insights gained here may aid in the formulation of more efficacious vitamin-fortified foods and beverages from plant-derived ingredients.

Potential of Nanomaterial Applications in Dietary Supplements and Foods for Special Medical Purposes

Dietary supplements and foods for special medical purposes are special medical products classified according to the legal basis. They are regulated, for example, by the European Food Safety Authority and the U.S. Food and Drug Administration, as well as by various national regulations issued most frequently by the Ministry of Health and/or the Ministry of Agriculture of particular countries around the world. They constitute a concentrated source of vitamins, minerals, polyunsaturated fatty acids and antioxidants or other compounds with a nutritional or physiological effect contained in the food/feed, alone or in combination, intended for direct consumption in small measured amounts. As nanotechnology provides "a new dimension" accompanied with new or modified properties conferred to many current materials, it is widely used for the production of a new generation of drug formulations, and it is also used in the food industry and even in various types of nutritional supplements. These nanoformulations of supplements are being prepared especially with the purpose to improve bioavailability, protect active ingredients against degradation, or reduce side effects. This contribution comprehensively summarizes the current state of the research focused on nanoformulated human and veterinary dietary supplements, nutraceuticals, and functional foods for special medical purposes, their particular applications in various food products and drinks as well as the most important related guidelines, regulations and directives.

Vitamin E Encapsulation within Oil-in-Water Emulsions: Impact of Emulsifier Type on Physicochemical Stability and Bioaccessibility

The influence of plant-based (gum arabic and quillaja saponin) and animal-based (whey protein isolate, WPI) emulsifiers on the production and stability of vitamin E-fortified emulsions was investigated. Their impact on lipid digestibility and vitamin bioaccessibility was also studied utilizing an in vitro gastrointestinal tract. WPI and saponin produced smaller emulsions than gum arabic. All emulsions had good storage stability at room temperature (4 weeks, pH 7). Saponin- and gum arabic-emulsions were resistant to droplet aggregation from pH 2 to 8 because these emulsifiers generated strong electrosteric repulsion. WPI-coated droplets flocculated around pH 5 due to a reduction in charge near their isoelectric point. Lipid digestion was slower in saponin-emulsions, presumably because the high surface activity of saponins inhibited their removal by bile acids and lipase. Vitamin bioaccessibility was higher in WPI- than in saponin- or gum arabic-emulsions. This information may facilitate the design of more efficacious vitamin-fortified delivery systems.

Use of Lipid Nanocarriers to Improve Oral Delivery of Vitamins

The chemical environment and enzymes in the gastrointestinal (GI) membrane limit the oral absorption of some vitamins. The GI epithelium also contributes to the poor permeability of numerous antioxidant agents. Thus, lipophilic vitamins do not readily dissolve in the GI tract, and therefore they have low bioavailability. Nanomedicine has the potential to improve the delivery efficiency of oral vitamins. In particular, the use of lipid nanocarriers for certain vitamins that are administered orally can provide improved solubility, chemical stability, epithelium permeability and bioavailability, half-life, nidus targeting, and fewer adverse effects. These lipid nanocarriers include self-emulsifying drug delivery systems (SEDDSs), nanoemulsions, microemulsions, solid lipid nanoparticles (SLNs), and nanostructured lipid carriers (NLCs). The use of nontoxic excipients and sophisticated material engineering of lipid nanosystems allows for control of the physicochemical properties of the nanoparticles and improved GI permeation via mucosal or lymphatic transport. In this review, we highlight recent progress in the development of lipid nanocarriers for vitamin delivery. In addition, the same lipid nanocarriers used for vitamins may also be effective as carriers of vitamin derivatives, and therefore enhance their oral bioavailability. One example is the incorporation of d-α-tocopheryl polyethylene glycol succinate (TPGS) as the emulsifier in lipid nanocarriers to increase the solubility and inhibit P-glycoprotein (P-gp) efflux. We also survey the concepts and discuss the mechanisms of nanomedical techniques that are used to develop vitamin-loaded nanocarriers.