Scalable graphene production: perspectives and challenges of plasma applications

Fabrication of Large-Area Metal-on-Carbon Catalytic Condensers for Programmable Catalysis

Catalytic condensers stabilize charge on either side of a high-k dielectric film to modulate the electronic states of a catalytic layer for the electronic control of surface reactions. Here, carbon sputtering provided for fast, large-scale fabrication of metal-carbon catalytic condensers required for industrial application. Carbon films were sputtered on HfO2 dielectric/p-type Si with different thicknesses (1, 3, 6, and 10 nm), and the enhancement of conductance and capacitance of carbon films was observed upon increasing the carbon thickness following thermal treatment at 400 °C. After Pt deposition on the carbon films, the Pt catalytic condenser exhibited a high capacitance of ∼210 nF/cm2 that was maintained at a frequency ∼1000 Hz, satisfying the requirement for a dynamic catalyst to implement catalytic resonance. Temperature-programmed desorption of carbon monoxide yielded CO desorption peaks that shifted in temperature with the varying potential applied to the condenser (-6 or +6 V), indicating a shift in the binding energy of carbon monoxide on the Pt condenser surface. A substantial increase in capacitance (∼2000 nF/cm2) of the Pt-on-carbon devices was observed at elevated temperatures of 400 °C that can modulate ∼10% of charge per metal atom when 10 V potential was applied. A large catalytic condenser of 42 cm2 area Pt/C/HfO2/Si exhibited a high capacitance of 9393 nF with a low leakage current/capacitive current ratio (<0.1), demonstrating the practicality and versatility of the facile, large-scale fabrication method for metal-carbon catalytic condensers.

CF4 Plasma-Generated LiF-Li2 C2 Artificial Layers for Dendrite-Free Lithium-Metal Anodes

Lithium metal anodes have long been considered as "holy grail" in the field of energy storage batteries, but dendrite growth and large volume changes hinder their practical applications. Herein, a facile and eco-friendly CF₄ plasma treatment is employed for the surface modification of Li anodes, and an artificial layer consisting of LiF and Li₂ C₂ is fabricated for the first time. Experimental results and theoretical calculations reveal that the high adsorption energy of LiF and low Li⁺ diffusion barriers in Li₂ C₂ induce uniform nucleation and planar growth of Li, guaranteeing a stable and dendrite-free Li structure during the repeated plating/stripping process of cycling. Symmetric cells using CF₄ plasma-treated Li operate stably for more than 6500 h (at 2 mA cm^-2 and 1 mAh cm^-2 ) or 950 h (at 1 mA cm^-2 and 10 mAh cm^-2 ). When paired with a LiFePO₄ cathode, full batteries deliver a high reversible capacity of 136 mAh g^-1 (at 1 C) with considerable cycling stability (97.2% capacity retention over 200 cycles) and rate performance (116 mAh g^-1 up to 5 C). This powerful application of plasma technology toward novel LiF-Li₂ C₂ artificial layers provide new routes for constructing environment-friendly and high-performance energy storage devices.

Towards Repeatable, Scalable Graphene Integrated Micro-Nano Electromechanical Systems (MEMS/NEMS)

The demand for graphene-based devices is rapidly growing but there are significant challenges for developing scalable and repeatable processes for the manufacturing of graphene devices. Basic research on understanding and controlling growth mechanisms have recently enabled various mass production approaches over the past decade. However, the integration of graphene with Micro-Nano Electromechanical Systems (MEMS/NEMS) has been especially challenging due to performance sensitivities of these systems to the production process. Therefore, ability to produce graphene-based devices on a large scale with high repeatability is still a major barrier to the commercialization of graphene. In this review article, we discuss the merits of integrating graphene into Micro-Nano Electromechanical Systems, current approaches for the mass production of graphene integrated devices, and propose solutions to overcome current manufacturing limits for the scalable and repeatable production of integrated graphene-based devices.

Plasma Assisted Reduction of Graphene Oxide Films

The past decade has seen enormous efforts in the investigation and development of reduced graphene oxide (GO) and its applications. Reduced graphene oxide (rGO) derived from GO is known to have relatively inferior electronic characteristics when compared to pristine graphene. Yet, it has its significance attributed to high-yield production from inexpensive graphite, ease of fabrication with solution processing, and thus a high potential for large-scale applications and commercialization. Amongst several available approaches for GO reduction, the mature use of plasma technologies is noteworthy. Plasma technologies credited with unique merits are well established in the field of nanotechnology and find applications across several fields. The use of plasma techniques for GO development could speed up the pathway to commercialization. In this report, we review the state-of-the-art status of plasma techniques used for the reduction of GO-films. The strength of various techniques is highlighted with a summary of the main findings in the literature. An analysis is included through the prism of chemistry and plasma physics.

Graphene Flakes for Electronic Applications: DC Plasma Jet-Assisted Synthesis

The possibility of graphene synthesis (the bottom-up approach) in plasma and the effective control of the morphology and electrical properties of graphene-based layers were demonstrated. Graphene flakes were grown in a plasma jet generated by a direct current plasma torch with helium and argon as the plasma-forming gases. In the case of argon plasma, the synthesized graphene flakes were relatively thick (2-6 nm) and non-conductive. In helium plasma, for the first time, graphene with a predominance of monolayer flakes and high conductivity was grown in a significant amount using an industrial plasma torch. One-dimensional (1D) flow modeling shows that the helium plasma is a less charged environment providing the formation of thinner graphene flakes with low defect density. These flakes might be used for a water-based suspension of the graphene with PEDOT:PSS (poly(3,4-ethylenedioxythiophene): polystyrene sulfonate) composite to create the structures employing the 2D printing technologies. Good structural quality, low layer resistance, and good mechanical strength combined with the ability to obtain a large amount of the graphene powder, and to control the parameters of the synthesized particles make this material promising for various applications and, above all, for sensors and other devices for flexible electronics and the Internet of things ecosystem.

State of the art: synthesis and characterization of functionalized graphene nanomaterials

Nanomaterials play nowadays a preponderant role in the field of materials science due to the wide range of applications and synergy with other fields of knowledge. Recently, carbonaceous nanomaterials, most notably bi-dimensional graphene (2D graphene), have been highlighted by their application in several areas: electronics, chemistry, medicine, energy and the environment. The search for new materials has led many researchers to develop new routes of synthesis and the expansion of the current means of production, by the anchoring of other nanomaterials on graphene surface, or by modifications of its hexagon sp2 structure, through the doping of heteroatoms. By adding functional groups to the graphene surface, it is possible to increase its affinity with other materials, such as polymers, magnetic nanoparticles and clays, leading to the formation of new nanocomposites. Several covalent and non-covalent functionalization processes, their advantages and disadvantages with respect to their interactions with other chemical species, are discussed in this review. The characterization of these materials is a sensitive topic, since the insertion of functional groups over the graphene basal plane causes changes in its morphology and the so-called chemistry of surface. In this sense, beyond the classical techniques, such as x-ray Diffraction (XRD), Infrared Spectroscopy (FTIR), Raman Spectroscopy and Transmission Electron Microscopy (TEM), modern characterization techniques of graphene-based nanomaterials are discussed, focusing on those more indicated according to the proposed modifications. A significant attention was driven to environmental applications of functionalized graphenes, specifically in the removal of pollutants from wastewaters.

Oriented Carbon Nanostructures from Plasma Reformed Resorcinol-Formaldehyde Polymer Gels for Gas Sensor Applications

Oriented carbon nanostructures (OCNs) with dominant graphitic characteristics have attracted research interest for various applications due to the excellent electrical and optical properties owing to their vertical orientation, interconnected structures, electronic properties, and large surface area. Plasma enhanced chemical vapor deposition (PECVD) is considered as a promising method for the large-scale synthesis of OCNs. Alternatively, structural reformation of natural carbon precursor or phenol-based polymers using plasma-assisted surface treatment is also considered for the fabrication of OCNs. In this work, we have demonstrated a fast technique for the synthesis of OCNs by plasma-assisted structure reformation of resorcinol-formaldehyde (RF) polymer gels using radio-frequency inductively coupled plasma (rf-ICP). A thin layer of RF polymer gel cast on a glass substrate was used as the carbon source and treated with rf plasma under different plasma discharge conditions. Argon and hydrogen gases were used in surface treatment, and the growth of carbon nanostructures at different discharge parameters was systematically examined. This study explored the influence of the gas flow rate, the plasma power, and the treatment time on the structural reformation of polymer gel to produce OCNs. Moreover, the gas-sensing properties of as-prepared OCNs towards ethanol at atmospheric conditions were also investigated.

Doping free transfer of graphene using aqueous ammonia flow

Doping-free transfer of graphene produced by catalytic chemical vapor deposition (CVD) on copper foil, is still a technical challenge since unintentional doping of the transferred graphene layer yields an uncontrolled shift of Dirac point in graphene-based field-effect transistors (FETs). Typically, CVD graphene is released from the growth template by etching of the template, i.e. copper. During the etching process, ions adhere to the graphene layer resulting in unintentional doping. We demonstrate that washing a CVD graphene layer in an aqueous ammonia flow bath after etching copper, removes the majority of the unintentional dopants. FETs fabricated from graphene after washing in DI-water display a large scattering in Dirac bias with lowered mobility. In contrast, FETs from graphene that is washed in ammonia furnish better performance with high geometrically normalized mobility exceeding 2.4 × 104 cm2 V-1 s-1, balanced transport and a Dirac voltage near zero. We attribute the improved FET behavior to effective removal of the ions with a typical density of 4 × 1012 cm-2 from the graphene layer.

Non-Dendritic Zn Electrodeposition Enabled by Zincophilic Graphene Substrates

Rechargeable zinc (Zn) batteries suffer from poor cycling performance that can be attributed to dendrite growth and surface-originated side reactions. Herein, we report that cycling performance of Zn metal anode can be improved significantly by utilizing monolayer graphene (Gr) as the electrodeposition substrate. Utilizing microscopy and X-ray diffraction techniques, we demonstrate that electrodeposited Zn on Gr substrate has a compact, uniform, and nondendritic character. The Gr layer, due to its high lattice compatibility with Zn, provides low nucleation overpotential sites for Zn electrodeposition. Atomistic calculations indicate that Gr has strong affinity to Zn (binding energy of 4.41 eV for Gr with four defect sites), leading to uniform distribution of Zinc adatoms all over the Gr surface. This synergistic compatibility between Gr and Zn promotes subsequent homogeneous and planar Zn deposits with low interfacial energy (0.212 J/m²) conformal with the current collector surface.

A Strategy to Synthesize Multilayer Graphene in Arc-Discharge Plasma in a Semi-Opened Environment

Graphene, as the earliest discovered two-dimensional (2D) material, possesses excellently physical and chemical properties. Vast synthetic strategies, including chemical vapor deposition, mechanical exfoliation, and chemical reduction, are proposed. In this paper, a method to synthesize multilayer graphene in a semi-opened environment is presented by introducing arc-discharge plasma technology. Compared with previous technologies, the toxic gases and hazardous chemical components are not generated in the whole process. The synthesized carbon materials were characterized by transmission electron microscopy, atomic force microscopy, X-ray diffraction, and Raman spectra technologies. The paper offers an idea to synthesize multilayer graphene in a semi-opened environment, which is a development to produce graphene with arc-discharge plasma.

Low-Temperature Graphene Growth by Forced Convection of Plasma-Excited Radicals

We developed the forced convection (FC)-PECVD method for the synthesis of graphene, in which a specially designed blowing plasma source is used at moderate gas pressure (1-10 Torr) and the distribution of reactive radicals reaching the substrate surface can be controlled by forced convection. Self-limiting growth of graphene occurs on copper foil, and monolayer graphene growth with a few defects is achieved even at low temperatures (<400 °C). We also demonstrated the enlargement of the growth area using the scalable blowing plasma source. We expect that the FC-PECVD method overcomes the limitations of conventional low-temperature PECVD and provides a breakthrough for the achievement of industrial applications based on graphene.

Properties of Nitrogen/Silicon Doped Vertically Oriented Graphene Produced by ICP CVD Roll-to-Roll Technology

Simultaneous mass production of high quality vertically oriented graphene nanostructures and doping them by using an inductively coupled plasma chemical vapor deposition (ICP CVD) is a technological problem because little is understood about their growth mechanism over enlarged surfaces. We introduce a new method that combines the ICP CVD with roll-to-roll technology to enable the in-situ preparation of vertically oriented graphene by using propane as a precursor gas and nitrogen or silicon as dopants. This new technology enables preparation of vertically oriented graphene with distinct morphology and composition on a moving copper foil substrate at a lower cost. The technological parameters such as deposition time (1–30 min), gas partial pressure, composition of the gas mixture (propane, argon, nitrogen or silane), heating treatment (1–60 min) and temperature (350–500 °C) were varied to reveal the nanostructure growth, the evolution of its morphology and heteroatom’s intercalation by nitrogen or silicon. Unique nanostructures were examined by FE-SEM microscopy, Raman spectroscopy and energy dispersive X-Ray scattering techniques. The undoped and nitrogen- or silicon-doped nanostructures can be prepared with the full area coverage of the copper substrate on industrially manufactured surface defects. Longer deposition time (30 min, 450 °C) causes carbon amorphization and an increased fraction of sp3-hybridized carbon, leading to enlargement of vertically oriented carbonaceous nanostructures and growth of pillars.

Oxygen plasmas: a sharp chisel and handy trowel for nanofabrication

Although extremely chemically reactive, oxygen plasmas feature certain properties that make them attractive not only for material removal via etching and sputtering, but also for driving and sustaining nucleation and growth of various nanostructures in plasma bulk and on plasma-exposed surfaces. In this minireview, a number of representative examples is used to demonstrate key mechanisms and unique capabilities of oxygen plasmas and how these can be used in present-day nano-fabrication. In addition to modification and functionalisation processes typical for oxygen plasmas, their ability to catalyse the growth of complex nanoarchitectures is emphasized. Two types of technologies based on oxygen plasmas, namely surface treatment without a change in the size and shape of surface features, as well as direct growth of oxide structures, are used to better illustrate the capabilities of oxygen plasmas as a powerful process environment. Future applications and possible challenges for the use of oxygen plasmas in nanofabrication are discussed.

Atmospheric Dry Hydrogen Plasma Reduction of Inkjet-Printed Flexible Graphene Oxide Electrodes

This study concerns a low-temperature method for dry hydrogen plasma reduction of inkjet-printed flexible graphene oxide (GO) electrodes, an approach compatible with processes envisaged for the manufacture of flexible electronics. The processing of GO to reduced graphene oxide (rGO) was performed in 1-64 s, and sp² /sp² +sp³ carbon concentration increased from approximately 20 % to 90 %. Since the plasma reduction was associated with an etching effect, the optimal reduction time occurred between 8 and 16 s. The surface showed good mechanical stability when deposited on polyethylene terephthalate flexible foils and significantly lower sheet resistance after plasma reduction. This method for dry plasma reduction could be important for large-area hydrogenation and reduction of GO flexible surfaces, with present and potential applications in a wide variety of emerging technologies.

Recent progress and perspectives of space electric propulsion systems based on smart nanomaterials

Drastic miniaturization of electronics and ingression of next-generation nanomaterials into space technology have provoked a renaissance in interplanetary flights and near-Earth space exploration using small unmanned satellites and systems. As the next stage, the NASA's 2015 Nanotechnology Roadmap initiative called for new design paradigms that integrate nanotechnology and conceptually new materials to build advanced, deep-space-capable, adaptive spacecraft. This review examines the cutting edge and discusses the opportunities for integration of nanomaterials into the most advanced types of electric propulsion devices that take advantage of their unique features and boost their efficiency and service life. Finally, we propose a concept of an adaptive thruster.

Toxicity of Pristine and Chemically Functionalized Fullerenes to White Rot Fungus Phanerochaete chrysosporium

Fullerenes are widely produced and applied carbon nanomaterials that require a thorough investigation into their environmental hazards and risks. In this study, we compared the toxicity of pristine fullerene (C60) and carboxylated fullerene (C60-COOH) to white rot fungus Phanerochaete chrysosporium. The influence of fullerene on the weight increase, fibrous structure, ultrastructure, enzyme activity, and decomposition capability of P. chrysosporium was investigated to reflect the potential toxicity of fullerene. C60 did not change the fresh and dry weights of P. chrysosporium but C60-COOH inhibited the weight gain at high concentrations. Both C60 and C60-COOH destroyed the fibrous structure of the mycelia. The ultrastructure of P. chrysosporium was changed by C60-COOH. Pristine C60 did not affect the enzyme activity of the P. chrysosporium culture system while C60-COOH completely blocked the enzyme activity. Consequently, in the liquid culture, P. chrysosporium lost the decomposition activity at high C60-COOH concentrations. The decreased capability in degrading wood was observed for P. chrysosporium exposed to C60-COOH. Our results collectively indicate that chemical functionalization enhanced the toxicity of fullerene to white rot fungi and induced the loss of decomposition activity. The environmental risks of fullerene and its disturbance to the carbon cycle are discussed.

Process-specific mechanisms of vertically oriented graphene growth in plasmas

Applications of plasma-produced vertically oriented graphene nanosheets (VGNs) rely on their unique structure and morphology, which can be tuned by the process parameters to understand the growth mechanism. Here, we report on the effect of the key process parameters such as deposition temperature, discharge power and distance from plasma source to substrate on the catalyst-free growth of VGNs in microwave plasmas. A direct evidence for the initiation of vertical growth through nanoscale graphitic islands is obtained from the temperature-dependent growth rates where the activation energy is found to be as low as 0.57 eV. It is shown that the growth rate and the structural quality of the films could be enhanced by (a) increasing the substrate temperature, (b) decreasing the distance between the microwave plasma source and the substrate, and (c) increasing the discharge power. The correlation between the wetting characteristics, morphology and structural quality is established. It is also demonstrated that morphology, crystallinity, wettability and sheet resistance of the VGNs can be varied while maintaining the same sp³ content in the film. The effects of the substrate temperature and the electric field in vertical alignment of the graphene sheets are reported. These findings help to develop and optimize the process conditions to produce VGNs tailored for applications including sensing, field emission, catalysis and energy storage.

Metallic Biomaterials: Current Challenges and Opportunities

Metallic biomaterials are engineered systems designed to provide internal support to biological tissues and they are being used largely in joint replacements, dental implants, orthopaedic fixations and stents. Higher biomaterial usage is associated with an increased incidence of implant-related complications due to poor implant integration, inflammation, mechanical instability, necrosis and infections, and associated prolonged patient care, pain and loss of function. In this review, we will briefly explore major representatives of metallic biomaterials along with the key existing and emerging strategies for surface and bulk modification used to improve biointegration, mechanical strength and flexibility of biometals, and discuss their compatibility with the concept of 3D printing.

Effect of Precursor on Antifouling Efficacy of Vertically-Oriented Graphene Nanosheets

Antifouling efficacy of graphene nanowalls, i.e., substrate-bound vertically-oriented graphene nanosheets, has been demonstrated against biofilm-forming Gram-positive and Gram-negative bacteria. Where graphene nanowalls are typically prepared using costly high-temperature synthesis from high-purity carbon precursors, large-scale applications demand efficient, low-cost processes. The advancement of plasma enabled synthesis techniques in the production of nanomaterials has opened a novel and effective method for converting low-cost natural waste resources to produce nanomaterials with a wide range of applications. Through this work, we report the rapid reforming of sugarcane bagasse, a low-value by-product from sugarcane industry, into high-quality vertically-oriented graphene nanosheets at a relatively low temperature of 400 °C. Electron microscopy showed that graphene nanowalls fabricated from methane were significantly more effective at preventing surface attachment of Gram-negative rod-shaped Escherichia coli compared to bagasse-derived graphene, with both surfaces showing antifouling efficacy comparable to copper. Attachment of Gram-positive coccal Staphylococcus aureus was lower on the surfaces of both types of graphene compared to that on copper, with bagasse-derived graphene being particularly effective. Toxicity to planktonic bacteria estimated as a reduction in colony-forming units as a result of sample exposure showed that both graphenes effectively retarded cell replication.

p-Doping of graphene in hybrid materials with 3,10-diazapicenium dications

N,N'-Didodecyl-substituted 3,10-diazapicenium salts featuring bromide and hexafluorophosphate counterions have been designed as novel dopants to realize individualized graphene sheets in a series of cutting edge experiments and to intrinsically stabilize them via p-doping. Importantly, electrochemical studies revealed two consecutive irreversible one-electron reductions of the N,N'-didodecyl-substituted 3,10-diazapicenium salts to yield the corresponding radical cation and neutral quinoidal species. Formation of both species was accompanied by characteristic changes in the absorption spectra. The 3,10-diazapicenium bromide was found to be a potent dopant to produce hybrid materials with exfoliated graphene. Microscopy based on AFM and TEM imaging and spectroscopy based on Raman probing corroborated that, upon drying, the hybrid material consists of few layer (5-8 layers) turbostratic graphene sheets that are p-doped. Our findings identify the newly synthesized N,N'-dialkylated 3,10-diazapicenium salts as highly promising candidates for the fabrication of functional graphene materials with tailored properties.

Fast low-temperature plasma reduction of monolayer graphene oxide at atmospheric pressure

We report on an ultrafast plasma-based graphene oxide reduction method superior to conventional vacuum thermal annealing and/or chemical reduction. The method is based on the effect of non-equilibrium atmospheric-pressure plasma generated by the diffuse coplanar surface barrier discharge in proximity of the graphene oxide layer. As the reduction time is in the order of seconds, the presented method is applicable to the large-scale production of reduced graphene oxide layers. The short reduction times are achieved by the high-volume power density of plasma, which is of the order of 100 W cm^-3. Monolayers of graphene oxide on silicon substrate were prepared by a modified Langmuir-Schaefer method and the efficient and rapid reduction by methane and/or hydrogen plasma was demonstrated. The best results were obtained for the graphene oxide reduction in hydrogen plasma, as verified by x-ray photoelectron spectroscopy and Raman spectroscopy.

Microwave reduction of graphene oxide rationalized by reactive molecular dynamics

Obtaining graphene (GRA) in industrial quantities is among the most urgent goals in today's nanotechnology. Elegant methods involve the oxidation of graphite with its subsequent solvent-assisted exfoliation. The reduction of graphene oxide (GO) is challenging leading to a highly-disordered oxygen-rich material. A particularly successful microwave-induced reduction of GO was reported recently (Science, 2016, 353, 1413-1416). We mimic the experiment by reactive molecular dynamics and establish the molecular mechanisms of reduction and their time scales as functions of temperature. We show that the rapid removal of oxygen groups achieved by microwave heating leaves GRA sheets intact. The epoxy groups are most stable within GO. They can rearrange into the carbonyl groups upon quick heating. It is important to avoid creating holes upon graphite oxidation. They cannot be healed easily and undermine GRA thermal stability and electronic properties. The edge oxygen groups cannot be removed by irradiation, but their effect is marginal on the properties of μm GRA sheets. We demonstrate that different oxygen groups are removed from GO at drastically different temperatures. Therefore, it is possible to obtain separate fractions, e.g. carbonyl-, hydroxyl- and carboxyl-free partially reduced GO. Our results guide the improvement of the GO reduction methods and can be tested directly by experiment.

Laser-patterned functionalized CVD-graphene as highly transparent conductive electrodes for polymer solar cells

A five-layer (5L) graphene on a glass substrate has been demonstrated as a transparent conductive electrode to replace indium tin oxide (ITO) in organic photovoltaic devices. The required low sheet resistance, while maintaining high transparency, and the need of a wettable surface are the main issues. To overcome these, two strategies have been applied: (i) the p-doping of the multilayer graphene, thus reaching 25 Ω□^-1 or (ii) the O₂-plasma oxidation of the last layer of the 5L graphene that results in a contact angle of 58° and a sheet resistance of 134 Ω□^-1. A Nd:YVO₄ laser patterning has been implemented to realize the desired layout of graphene through an easy and scalable way. Inverted Polymer Solar Cells (PSCs) have been fabricated onto the patterned and modified graphene. The use of PEDOT:PSS has facilitated the deposition of the electron transport layer and a non-chlorinated solvent (ortho-xylene) has been used in the processing of the active layer. It has been found that the two distinct functionalization strategies of graphene have beneficial effects on the overall performance of the devices, leading to an efficiency of 4.2%. Notably, this performance has been achieved with an active area of 10 mm², the largest area reported in the literature for graphene-based inverted PSCs.

Plasma-deposited hydrogenated amorphous silicon films: multiscale modelling reveals key processes

Physical and chemical mechanisms and role of plasma in the synthesis of hydrogenated amorphous silicon were studied numerically to reveal the key growth processes and, hence, to ensure a higher level of control over the film structure and properties.

Highly efficient visible-light-driven plasmonic photocatalysts based on graphene oxide mediated hybridization of graphite and Ag/AgBr

Graphite (Gr) has been facilely hybridized with Ag/AgBr under the assistance of graphene oxide (GO). The as-produced Gr/GO/Ag/AgBr displays substantially boosted photocatalytic performances compared to Ag/AgBr, GO/Ag/AgBr, and Gr/Ag/AgBr.