Preparation and characterization of cellulose fluorescent material: Experiment and simulation

The extensive use of fossil based materials has caused serious pollution problems, the full utilization of biomass resources to prepare high value-added new materials is of great significance for the environmental protection and sustainable social development. For this purpose, this study explored the preparation process and molecular dynamics simulation of cellulose fluorescent materials. Firstly, bacterial cellulose was dissolved in a solution of NaOH and urea at low temperature, followed by a solution blending and hot pressing with hyperbranched polyamide. It was found that the addition of hyperbranched polyamide could effectively filled in the internal pores of cellulose hydrogel, thereby enhancing the fluorescence effects and tensile properties, especially the elongation at break of cellulose materials. The optimal amount of hyperbranched polyamide added was 5 wt%. Molecular dynamics simulation showed that the hydrogen bonds and interaction with cellulose increased as the concentration of hyperbranched polyamide increased.

pH-Sensitive Polyacrylic Acid-Gated Mesoporous Silica Nanocarrier Incorporated with Calcium Ions for Controlled Drug Release

In this work, polyacrylic acid-functionalized MCM-41 was synthesized, which was made to interact with calcium ions, in order to realize enhanced pH-responsive nanocarriers for sustained drug release. First, mesoporous silica nanoparticles (MSNs) were prepared by the sol-gel method. Afterward, a (3-trimethoxysilyl)propyl methacrylate (TMSPM) modified surface was prepared by using the post-grafting method, and then the polymerization of the acrylic acid was performed. After adding a calcium chloride solution, polyacrylic acid-functionalized MSNs with calcium-carboxyl ionic bonds in the polymeric layer, which can prevent the cargo from leaking out of the mesopore, were prepared. The structure and morphology of the modified nanoparticles (PAA-MSNs) were characterized by X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), and N₂ adsorption-desorption analysis, etc. The controlled release of guest molecules was studied by using 5-fluorouracil (5-FU). The drug molecule-incorporated nanoparticles showed different releasing rates under different pH conditions. It is considered that our current materials have the potential as pH-responsive nanocarriers in the field of medical treatment.

Enhancement of Epoxy Thermosets with Hyperbranched and Multiarm Star Polymers: A Review

Hyperbranched polymers and multiarm star polymers are a type of dendritic polymers which have attracted substantial interest during the last 30 years because of their unique properties. They can be used to modify epoxy thermosets to increase their toughness and flexibility but without adversely affecting other properties such as reactivity or thermal properties. In addition, the final properties of materials can be tailored by modifying the structure, molecular weight, or type of functional end-groups of the hyperbranched and multiarm star polymers. In this review, we focus on the modification of epoxy-based thermosets with hyperbranched and multiarm star polymers in terms of the effect on the curing process of epoxy formulations, thermal, mechanical, and rheological properties, and their advantages in fire retardancy on the final thermosets.

Effective SARS-CoV-2 antiviral activity of hyperbranched polylysine nanopolymers

The coronavirus pandemic (COVID-19) had spread rapidly since December 2019, when it was first identified in Wuhan, China. As of April 2021, more than 130 million cases have been confirmed, with more than 3 million deaths, making it one of the deadliest pandemics in history. Different approaches must be put in place to confront a new pandemic: community-based behaviours (i.e., isolation and social distancing), antiviral treatments, and vaccines. Although behaviour-based actions have produced significant benefits and several efficacious vaccines are now available, there is still an urgent need for treatment options. Remdesivir represents the first antiviral drug approved by the Food and Drug Administration for COVID-19 but has several limitations in terms of safety and treatment benefits. There is still a strong request for other effective, safe, and broad-spectrum antiviral systems in light of future emergent coronaviruses. Here, we describe a polymeric nanomaterial derived from L-lysine, with an antiviral activity against SARS-CoV-2 associated with a good safety profile in vitro. Nanoparticles of hyperbranched polylysine, synthesized by L-lysine's thermal polymerization catalyzed by boric acid, effectively inhibit the SARS-CoV-2 replication. The virucidal activity is associated with the charge and dimension of the nanomaterial, favouring the electrostatic interaction with the viral surface being only slightly larger than the virions' dimensions. Low-cost production and easiness of synthesis strongly support the further development of such innovative nanomaterials as a tool for potential treatments of COVID-19 and, in general, as broad-spectrum antivirals.

Synthesis, Enzymatic Degradation, and Polymer-Miscibility Evaluation of Nonionic Antimicrobial Hyperbranched Polyesters with Indole or Isatin Functionalities

Most macromolecular antimicrobials are ionic and thus lack miscibility/compatibility with nonionic substrate materials. In this context, nonionic hyperbranched polyesters (HBPs) with indole or isatin functionality were rationally designed, synthesized, and characterized. Antimicrobial disk diffusion assay indicated that these HBPs showed significant antibacterial activity against 8 human pathogenic bacteria compared to small molecules with indole or isatin groups. According to DSC measurements, up to 20% indole-based HBP is miscible with biodegradable polyesters (polyhydroxybutyrate or polycaprolactone), which can be attributed to the favorable hydrogen bonding between the N–H moiety of indole and the C=O of polyesters. HBPs with isatin or methylindole were completely immiscible with the same matrices. None of the HBPs leaked out from plastic matrix after being immersed in water for 5 days. The incorporation of indole into HBPs as well as small molecules facilitated their enzymatic degradation with PETase from Ideonella sakaiensis, while isatin had a complex impact. Molecular docking simulations of monomeric molecules with PETase revealed different orientations of the molecules at the active site due to the presence of indole or isatin groups, which could be related to the observed different enzymatic degradation behavior. Finally, biocompatibility analysis with a mammalian cell line showed the negligible cytotoxic effect of the fabricated HBPs.

Recent advances in peptide-targeted micelleplexes: Current developments and future perspectives

The decoding of the human genome revolutionized the understanding of how genetics influence the interplay between health and disease, in a multidisciplinary perspective. Thus, the development of exogenous nucleic acids-based therapies has increased to overcome hereditary or acquired genetic-associated diseases. Gene drug delivery using non-viral systems, for instance micelleplexes, have been recognized as promising options for gene-target therapies. Micelleplexes are core-shell structures, at a nanometric scale, designed using amphiphilic block copolymers. These can self-assemble in an aqueous medium, leading to the formation of a hydrophilic and positively charged corona - that can transport nucleic acids, - and a hydrophobic core - which can transport poor water-soluble drugs. However, the performance of these types of carriers usually is hindered by several in vivo barriers. Fortunately, due to a significant amount of research, strategies to overcome these shortcomings emerged. With a wide range of structural features, good stability against proteolytic degradation, affordable characteristic, easy synthesis, low immunogenicity, among other advantages, peptides have increasingly gained popularity as target ligands for non-viral carriers. Hence, this review addresses the use of peptides with micelleplexes illustrating, through the analysis of in vitro and in vivo studies, the potential and future perspectives of this combination.

Superbranched polyglycerol nanostructures as drug delivery and theranostics tools for cancer treatment

Hyperbranched polymers (HBPs), such as hyperbranched polyglycerols (HPGs) with a dendritic configuration, have been recognized for their excellent biocompatibility and multifunctionalization. HPGs have been studied for use in the delivery diagnostic, imaging and therapeutic molecules in the area of nanobiomedicine. They show superior characteristics to linear polymers and dendrimers, such as compact structure, a simple manufacturing process with easy functionalization ability, low viscosity, and high stability. Owing to these advantages, HPGs are now considered promising carriers for drug delivery, diagnostics, imaging, and theranostics applications for cancer treatment. In this review, we also discuss safety aspects of HPG-based nanoformulations in various animal models and the clinical translation status of such polymers for real-time applications.

Advances in amphiphilic hyperbranched copolymers with an aliphatic hyperbranched 2,2-bis(methylol)propionic acid-based polyester core

Amphiphilic hyperbranched copolymers with an aliphatic hyperbranched 2,2-bis(methylol)propionic acid-based polyester core were highlighted.

Fluorescence resonance energy transfer-based drug delivery systems for enhanced photodynamic therapy

In this Review, recent advances in fluorescence resonance energy transfer-based drug delivery systems for enhanced photodynamic therapy are described, and the current challenges and perspectives in this emerging field are also discussed.

Synthesis of Lignin-based Phenol Terminated Hyperbranched Polymer

In this work, we proved the efficient synthesis of a bio-based hyper-branched polyphenol from a modified lignin degradation fragment. Protocatechuic acid was readily obtained from vanillin, a lignin degradation product, via alkaline conditions, and further polymerised to yield high molecular weight hyperbranched phenol terminated polyesters. Vanillic acid was also subjected to similar polymerisation conditions in order to compare polymerisation kinetics and differences between linear and hyperbranched polymers. Overall, protocatechuic acid was faster to polymerise and more thermostable with a degradation temperature well above linear vanillic acid polyester. Both polymers exhibited important radical scavenging activity (RSA) compared to commercial antioxidant and present tremendous potential for antioxidant applications.

A glimpse of biodegradable polymers and their biomedical applications

Over the past two decades, biodegradable polymers (BPs) have been widely used in biomedical applications such as drug carrier, gene delivery, tissue engineering, diagnosis, medical devices, and antibacterial/antifouling biomaterials. This can be attributed to numerous factors such as chemical, mechanical and physiochemical properties of BPs, their improved processibility, functionality and sensitivity towards stimuli. The present review intended to highlight main results of research on advances and improvements in terms of synthesis, physical properties, stimuli response, and/or applicability of biodegradable plastics (BPs) during last two decades, and its biomedical applications. Recent literature relevant to this study has been cited and their developing trends and challenges of BPs have also been discussed.

Synthesis of Novel pH-Tunable Thermoresponsive Hydroxyl-Terminated Hyperbranched Polyether

In this study, a new pH-tunable thermoresponsive hydroxyl-terminated hyperbranched polyether (HTHP 2) was successfully prepared via a one-pot cationic polymerization technique and postmodification. In the first step, hydroxyl-terminated hyperbranched polyether containing double bonds (HTHP 1) were synthesized. Then, through thiol-ene "click" reaction, pH-responsive carboxyl groups were introduced to the target polymer of HTHP 2. The products were characterized via Fourier-transform infrared spectra (FTIR), nuclear magnetic resonance (NMR), and size-exclusion chromatography-multiangle laser light scattering (SEC-MALLS). Moreover, dynamic light scattering (DLS) and UV-Vis spectroscopy was employed to study the pH- and thermoresponsiveness in detail. Results showed that HTHP 2 possessed typical pH-controllable thermoresponsive behavior. By regulating the solution pH value range 3.0-5.4, LCST of HTHP 2 could be changed from 12.8 to 68.0 °C. Meanwhile, the cell viabilities of A549 cells were more than 80% for in vitro cytotoxicity tests of HTHP 2, suggested that HTHP 2 polymers are of good biocompatibility for up to 24 h.

Stimuli-Responsive Phosphorus-Based Polymers

This microreview details recent developments in stimuli-responsive polymers with phosphorus in the main-chain, in particular polyphosphazenes and polyphosphoesters. The presence of phosphorus in the polymers endows unique properties onto the macromolecules, which can be utilized for the preparation of materials capable of physically responding to specific stimuli. Achieving the desired responsiveness has been much facilitated by recent developments in synthetic polymer chemistry, in particular controlled synthesis and backbone functionalization phosphorus-based polymers, in order to achieve the required properties and hence responsiveness of the materials. The development of phosphorus-based polymers which respond to the most important stimuli are discussed, namely, pH, oxidation, reduction, temperature and biological triggers. The polymers are placed in the context not just of each other but also with reference to state-of-the-art organic polymers.

A NIR-triggered gatekeeper of supramolecular conjugated unimicelles with two-photon absorption for controlled drug release

Near-infrared-sensitive supramolecular hyperbranched conjugated unimicelles were constructed for controlled drug release via two-photon excited fluorescence resonance energy transfer.

Nanocomposites containing polyvinyl alcohol and reinforced carbon-based nanofiller: A super effective biologically active material

A new class of biologically active polymer nanocomposites based on polyvinyl alcohol and reinforced mixed graphene/carbon nanotube as carbon-based nanofillers with a general abbreviation (polyvinyl alcohol/mixed graphene-carbon nanotubes) has been successfully synthesized by an efficient solution mixing method with the help of ultrasonic radiation. Mixed graphene and carbon nanotubes ratio has been prepared (50%:50%) wt by wt. Different loading of mixed graphene-carbon nanotubes (2, 5, 10, 15, and 20 wt%) were added to the host polyvinyl alcohol polymer. In this study, polyvinyl alcohol/mixed graphene-carbon nanotubes_a-e nanocomposites were characterized and analyzed by X-ray diffraction, Fourier transform infrared, scanning electron microscopy, transmission electron microscopy, and the thermal stability was measured by thermogravimetric analysis and derivative thermal gravimetric. Fourier transform infrared and X-ray diffraction spectra proved the addition of mixed graphene-carbon nanotubes into polyvinyl alcohol matrix. X-ray diffraction patterns for these nanocomposites showed 2θ = 19.35° and 40° due to the crystal nature of polyvinyl alcohol in addition to 2θ = 26.5° which attributed to the graphite plane of carbon-based nanofillers. Thermal stability of polyvinyl alcohol/mixed graphene-carbon nanotubes nanocomposites was enhanced comparing with pure polyvinyl alcohol. The main degradation step ranged between 360° and 450°C. Moreover, maximum composite degradation temperature has appeared at range from 285°C to 267°C and final composite degradation temperature (FCDT) displayed at a temperature range of 469-491°C. Antibacterial property of polyvinyl alcohol/mixed graphene-carbon nanotubes_a-e nanocomposites were tested against Escherichia coli bacteria using the colony forming units technique. Results showed an improvement of antibacterial property. The rate percentages of polyvinyl alcohol/mixed graphene-carbon nanotubes_b, polyvinyl alcohol/mixed graphene-carbon nanotubes_c, and polyvinyl alcohol/mixed graphene-carbon nanotubes_d nanocomposites after 24 h are 6%, 5%, and 7% respectively. However, polyvinyl alcohol/mixed graphene-carbon nanotubes_e nanocomposite showed hyperactivity, where its reduction percentage remarkably raised up to 100% which is the highest inhibition rate percentage. In addition, polyvinyl alcohol and polyvinyl alcohol/graphene-carbon nanotubes_a-d showed colony forming units values/ml 70 × 10⁶ and 65 ± 2 × 10⁶ after 12 h. After 24 h, the colony forming units values/ml were in the range of 86 × 10⁶-95 × 10⁶.

Noninvasive photothermal cancer therapy nanoplatforms via integrating nanomaterials and functional polymers

In the cutting-edge field of cancer therapy, noninvasive photothermal therapy (PTT) has received great attention because it is considered to overcome the drawbacks of conventional surgery, radiotherapy and chemotherapy of severe body injuries and side effects on the immune system. The construction of PTT therapeutic and theranostic nanoplatforms is the key issue in achieving tumor targeting, imaging and therapy in a synergetic manner. In this review, we focus on the recent advances in constructing PTT therapeutic and theranostic nanoplatforms by integrating nanomaterials and functional polymers. The noninvasive photothermal cancer therapy mechanism and achievement strategies of PTT therapeutic and theranostic nanoplatforms are presented as well as the innovative construction strategies and perspectives for the future. Owing to their high tumor ablation efficiency, biological availability and low- or non-toxicity, PTT therapeutic and theranostic nanoplatforms are promising and emerging in medicine and clinical applications.

Effect of aliphatic chain length on the chemical structures of low molecular weight hyperbranched polyesters

Low molecular weight hyperbranched (HB) polyesters were synthesized via melt polymerization from trimethylolpropane and three aliphatic dicarboxylic acids, namely, succinic acid (SA), adipic acid (AA) and dodecanedioic acid (DA). The degrees of branching (DBs) ranged between 30% and 75% depending on the monomer ratio. Their DB, cyclic index and terminal index were all determined, indicating that the shorter chain HB polyesters PE-SA and PE-AA showed a greater degree of intramolecular cyclization, compared to the longer aliphatic chains within PE-DA. The HB polyesters form stable colloidal suspensions in buffered aqueous media and were found to be pH responsive. The stability of the colloidal suspensions is enhanced by two factors: (1) increasing the aliphatic chain length and (2) increasing the pH of the solution for the same HB polyester.

Degradable, Dendritic Polyols on a Branched Polyphosphazene Backbone

Herein, we present the design, synthesis, and characterization of fully degradable, hybrid, star-branched dendritic polyols. First multiarmed polyphosphazenes were prepared as a star-branched scaffold which upon functionalization produced globular branched hydroxyl-functionalized polymers with over 1700 peripheral functional end groups. These polyols with unique branched architectures could be prepared with controlled molecular weights and relatively narrow dispersities. Furthermore, the polymers are shown to undergo hydrolytic degradation to low molecular weight degradation products, the rate of which could be controlled through postpolymerization functionalization of the phosphazene backbone.

Quantitative SPECT imaging and biodistribution point to molecular weight independent tumor uptake for some long-circulating polymer nanocarriers

Polymeric nanocarriers are promising entities for cancer diagnosis and therapy. The aim of such nanocarriers is to selectively accumulate in cancerous tissue that is difficult to visualize or treat. The passive accumulation of a nanocarrier in a tumor through extravasation is often attributed to the enhanced permeation and retention (EPR) effect and the size and shape of the nanocarrier. However, the tumor microenvironment is very heterogeneous and the intratumoral pressure is usually high, leading to different opinions about how the EPR of nanocarriers through the irregular vasculature of a tumor leads to accumulation. In order to investigate this topic, we studied methods for the determination of pharmacokinetic parameters, biodistribution and the tumor uptake of nanocarriers. More specifically, we used non-invasive quantitative Single-Photon Emission Computed Tomography/Computed Tomography (qSPECT/CT) imaging of hyperbranched polyglycerols (HPGs) to explore the specific biodistribution and tumor uptake of six model nanocarriers in Rag2m mice. We were interested to see if a distinct molecular weight (MW) of nanocarriers (HPG 25, 50, 100, 200, 300, 500 kDa) is favoured by the tumor. To trace the model nanocarriers, HPGs were covalently linked to the strong chelator desferrioxamine (DFO), and radiolabeled with the gamma emitter 67Ga (EC = 100%, E γ = 185 keV (21.4%), 300 keV (16.6%), half-life = 3.26 d). Without the need for blood collection, but instead using qSPECT/CT imaging inside the heart, the blood circulation half-lives of the 67Ga labeled HPGs were determined and increased from 9.9 ± 2.9 to 47.8 ± 7.9 hours with increasing polymer MW. Total tumor accumulation correlated positively with the circulation time of the HPGs. Comparing the tumor-to-blood ratio dynamically revealed how blood and tumor concentrations of the nanocarrier change over time and when equilibrium is reached. The time of equilibrium is size-dependent and increases with molecular weight. Furthermore, the data indicate that for larger MWs, nanocarrier uptake and retention by the tumor is size independent. Further studies are necessary to advance our understanding of the interplay between MW and nanoparticle accumulation in tumors.

A hyperbranched amphiphilic acetal polymer for pH-sensitive drug delivery

In this study, a novel hyperbranched amphiphilic block copolymer was synthesized using deactivation-enhanced atom transfer radical polymerization (DE-ATRP) for smart drug delivery.

Preparation, Characterization and Application of UV-Curable Flexible Hyperbranched Polyurethane Acrylate

A novel UV-curable hyperbranched polyurethane acrylate (FHBPUA) with excellent flexibility is successfully synthesized based on a reaction of hydroxyl terminated hyperbranched polyurethane (regarded as core) with flexible semiadduct urethane monoacrylate (regarded as arms). The structure and property of FHBPUA is firstly analyzed and then utilized as functional additives to ameliorate the UV-curing and mechanical properties of epoxy acrylate resin. The degree of branching of FHBPUA turns out to be 0.82. Its thermal decomposition process consists of three different stages, and the glass transition temperature is around 65 °C. The freestanding FHBPUA film (~30 μm thickness) can be UV-cured within 3 s, and its flexibility is up to 1 mm. With the increase of FHBPUA content to 10 wt %, the UV-curing time of UV1000 film decreases from 6 to 3 s, flexibility strikingly increases from 10 to 1 mm, and adhesive force also improves from 5 to 3 grades, meanwhile its glossiness is not influenced by FHBPUA. In addition, a certain amount of FHBPUA can improve the tensile strength and elongation at break of UV1000 film. This novel FHBPUA can be used not only to develop flexible UV-curable freestanding films but also as functional additives to perfect other UV-curable compositions like coatings, inks and 3D printed parts.

Simulation Studies on the Lipid Interaction and Conformation of Novel Drug-Delivery Pseudopeptidic Polymers

Pseudopeptides based on poly(l-lysine isophthalamide) backbone have emerged as promising drug delivery candidates due to their pH-activated membrane disruption ability. To gain molecular understanding on these novel polymeric species, we have constructed force-field parameters and simulated the behaviors of polymers with and without phenylalanine grafted as side chains under conditions compatible with different pHs. The free energy changes upon polymer permeation through membrane were calculated using the umbrella sampling technique. We show that both polymers with and without grafts interact better with the membrane under conditions compatible with lower pH. The conformational states of the polymers were investigated in water and at a water-membrane interface. On the basis of Markov state modeling results, we propose a possible advantage of the grafted polymer over the ungrafted polymer for membrane rupture because of its quicker conformational rearrangement kinetics.

Highly Stretchable and Highly Resilient Polymer-Clay Nanocomposite Hydrogels with Low Hysteresis

Highly stretchable and highly resilient polymer-clay nanocomposite hydrogels were synthesized by in situ polymerization of acrylamide in the presence of pristine montmorillonite (MMT) or chitosan-treated MMT nanoplatelets at an elevated temperature. Both nanocomposite hydrogels can be stretched to a strain of no less than 1290%. The treatment of clay with chitosan improves the tensile strength, elongation at break, and energy at break of the nanocomposite hydrogel by 237%, 102%, and 389%, respectively, due to the strong chitosan-MMT electrostatic interaction and the grafting of polyacrylamide onto chitosan chains. Both hydrogels display excellent resilience with low hysteresis; with a maximum tensile strain of 50%, ultralow hysteresis is found, while, with a maximum strain of 500%, both hydrogels fully recover their original state in just 1 min. The superb resilience of the nanocomposite hydrogels is attributed to the strong interactions within the hydrogels brought by chain branching, multiple hydrogen bonding, covalent bonding, and/or electrostatic force. The hydrogels can be fabricated into different shapes and forms, including microfibers spun using pressurized gyration, which may find a variety of potential applications in particular in healthcare.

Synthesis of a Degradable High-Performance Epoxy-Ended Hyperbranched Polyester

Degradation and recycling of cured thermosetting epoxy resins are major challenges to the industry. Here, a low-viscosity, degradable epoxy-ended hyperbranched polyester (DEHP) is synthesized by a reaction between epichlorohydrin and a carboxyl-ended hyperbranched polyester (DCHP) obtained from an esterification between citric acid and maleic anhydride. The chemical structures of DCHP and DEHP were characterized by Fourier transform infrared and ¹H NMR. DEHP has a positive effect on reinforcing and toughening of the diglycidyl ether of bisphenol-A (DGEBA). With an increase in the content and molecular weight of DEHP, the mechanical performances of the cured DEHP/DGEBA composites, including the tensile, flexural, and impact strengths, increase first and then decrease. The improvements on the tensile, flexural, and impact strengths were 34.2-43.4%, 35.6-48.1%, and 117.9-137.8%, respectively. Moreover, the DEHP also promotes degradation of the cured DEHP/DGEBA composites. The degree of degradation of the cured DEHP/DGEBA composites increases with an increase of the DEHP content and molecular weight. The composites containing 12 wt % DEHP can be degraded completely in only about 2 h at about 90 °C, compared with the degradation degree (35%) of cured DGEBA, indicating good degradation and recycling properties of the DEHP.

Covalent nano delivery systems for selective imaging and treatment of brain tumors

Nanomedicine is a rapidly evolving form of therapy that holds a great promise for superior drug delivery efficiency and therapeutic efficacy than conventional cancer treatment. In this review, we attempt to cover the benefits and the limitations of current nanomedicines with special attention to covalent nano conjugates for imaging and drug delivery in the brain. The improvement in brain tumor treatment remains dismal despite decades of efforts in drug development and patient care. One of the major obstacles in brain cancer treatment is the poor drug delivery efficiency owing to the unique blood-brain barrier (BBB) in the CNS. Although various anti-cancer agents are available to treat tumors outside of the CNS, the majority fails to cross the BBB. In this regard, nanomedicines have increasingly drawn attention due to their multi-functionality and versatility. Nano drugs can penetrate BBB and other biological barriers, and selectively accumulate in tumor cells, while concurrently decreasing systemic toxicity.

Amphiphilic hyperbranched polyglycerols in a new role as highly efficient multifunctional surface active stabilizers for poly(lactic/glycolic acid) nanoparticles

Amphiphilic hyperbranched polyglycerols synthesized with alkyl alcohol initiators are efficient surfactants and stabilizers for poly(lactic/glycolic acid) nanoparticles, which offer various new possibilities for surface functionalized nanosystems.

Cell-penetrating poly(disulfide)-based star polymers for simultaneous intracellular delivery of miRNAs and small molecule drugs

A cell-penetrating poly(disulfide)-based star-like system with high transfection efficacy for synergistic delivery of miRNAs and chemotherapeutic drugs has been reported.

An in vitro and in vivo study of peptide-functionalized nanoparticles for brain targeting: The importance of selective blood-brain barrier uptake

Targeted delivery of drugs across endothelial barriers remains a formidable challenge, especially in the case of the brain, where the blood-brain barrier severely limits entry of drugs into the central nervous system. Nanoparticle-mediated transport of peptide/protein-based drugs across endothelial barriers shows great potential as a therapeutic strategy in a wide variety of diseases. Functionalizing nanoparticles with peptides allows for more efficient targeting to specific organs. We have evaluated the hemocompatibilty, cytotoxicity, endothelial uptake, efficacy of delivery and safety of liposome, hyperbranched polyester, poly(glycidol) and acrylamide-based nanoparticles functionalized with peptides targeting brain endothelial receptors, in vitro and in vivo. We used an ELISA-based method for the detection of nanoparticles in biological fluids, investigating the blood clearance rate and in vivo biodistribution of labeled nanoparticles in the brain after intravenous injection in Wistar rats. Herein, we provide a detailed report of in vitro and in vivo observations.

GSH-responsive polymeric micelles based on the thio–ene reaction for controlled drug release

A glutathione (GSH) responsive drug carrier is prepared that relies on the thio–ene reaction of olefinic bonds and GSH.

Amphiphilic hyperbranched polymers with a biodegradable hyperbranched poly(ε-caprolactone) core prepared from homologous AB2 macromonomer

Amphiphilic hyperbranched polymers with biodegradable hyperbranched poly(ε-caprolactone) core were prepared from homologous AB₂ macromonomer.

BODIPY based hyperbranched conjugated polymers for detecting organic vapors

BODIPY-based hyperbranched polymer showed improved selectivity and sensitivity for toluene as originated from the strong π–π interaction and high porosity within polymer matrix.