Adsorption and Kinetics Studies of Cr (VI) by Graphene Oxide and Reduced Graphene Oxide-Zinc Oxide Nanocomposite

In this work, graphene oxide (GO) and its reduced graphene oxide-zinc oxide nanocomposite (rGO-ZnO) was used for the removal of Cr (VI) from aqueous medium. By employing a variety of characterization techniques, morphological and structural properties of the adsorbents were determined. The adsorption study was done by varying concentration, temperature, pH, time, and amount of adsorbent. The results obtained confirmed that rGO-ZnO is a more economical and promising adsorbent for removing Cr (VI) as compared to GO. Kinetic study was also performed, which suggested that sorption of Cr (VI) follows the pseudo-first-order model. For equilibrium study, non-linear Langmuir was found a better fitted model than its linearized form. The maximum adsorption capacity calculated for GO and rGO-ZnO nanocomposite were 19.49 mg/g and 25.45 mg/g, respectively. Endothermic and spontaneous nature of adsorption was detected with positive values of ΔS (change in entropy), which reflects the structural changes happening at the liquid/solid interface.

Farnesol delivery via polymeric nanoparticle carriers inhibits cariogenic cross-kingdom biofilms and prevents enamel demineralization

Streptococcus mutans and Candida albicans are frequently detected together in the plaque from patients with early childhood caries (ECC) and synergistically interact to form a cariogenic cross-kingdom biofilm. However, this biofilm is difficult to control. Thus, to achieve maximal efficacy within the complex biofilm microenvironment, nanoparticle carriers have shown increased interest in treating oral biofilms in recent years. Here, we assessed the anti-biofilm efficacy of farnesol (Far), a hydrophobic antibacterial drug and repressor of Candida filamentous forms, against cross-kingdom biofilms employing drug delivery via polymeric nanoparticle carriers (NPCs). We also evaluated the effect of the strategy on teeth enamel demineralization. The farnesol-loaded NPCs (NPC+Far) resulted in a 2-log CFU/mL reduction of S. mutans and C. albicans (hydroxyapatite disc biofilm model). High-resolution confocal images further confirmed a significant reduction in exopolysaccharides, smaller microcolonies of S. mutans, and no hyphal form of C. albicans after treatment with NPC+Far on human tooth enamel (HT) slabs, altering the biofilm 3D structure. Furthermore, NPC+Far treatment was highly effective in preventing enamel demineralization on HT, reducing lesion depth (79% reduction) and mineral loss (85% reduction) versus vehicle PBS-treated HT, while NPC or Far alone had no differences with the PBS. The drug delivery via polymeric NPCs has the potential for targeting bacterial-fungal biofilms associated with a prevalent and costly pediatric oral disease, such as ECC.

Intelligent Hydrogels in Myocardial Regeneration and Engineering

Myocardial infarction (MI) causes impaired cardiac function due to the loss of cardiomyocytes following an ischemic attack. Intelligent hydrogels offer promising solutions for post-MI cardiac tissue therapy to aid in structural support, contractility, and targeted drug therapy. Hydrogels are porous hydrophilic matrices used for biological scaffolding, and upon the careful alteration of ideal functional groups, the hydrogels respond to the chemistry of the surrounding microenvironment, resulting in intelligent hydrogels. This review delves into the perspectives of various intelligent hydrogels and evidence from successful models of hydrogel-assisted treatment strategies.

RAFT Emulsion Polymerization of Styrene Using a Poly((N,N-dimethyl acrylamide)-co-(N-isopropyl acrylamide)) mCTA: Synthesis and Thermosensitivity

Thermoresponsive poly((N,N-dimethyl acrylamide)-co-(N-isopropyl acrylamide)) (P(DMA-co-NIPAM)) copolymers were synthesized via reversible addition−fragmentation chain transfer (RAFT) polymerization. The monomer reactivity ratios were determined by the Kelen–Tüdős method to be r_NIPAM = 0.83 and r_DMA = 1.10. The thermoresponsive properties of these copo-lymers with varying molecular weights were characterized by visual turbidimetry and dynamic light scattering (DLS). The copolymers showed a lower critical solution temperature (LCST) in water with a dependence on the molar fraction of DMA in the copolymer. Chaotropic and kosmotropic salt anions of the Hofmeister series, known to affect the LCST of thermoresponsive polymers, were used as additives in the aqueous copolymer solutions and their influence on the LCST was demonstrated. Further on, in order to investigate the thermoresponsive behavior of P(DMA-co-NIPAM) in a confined state, P(DMA-co-NIPAM)-b-PS diblock copolymers were prepared via polymerization induced self-assembly (PISA) through surfactant-free RAFT mediated emulsion polymerization of styrene using P(DMA-co-NIPAM) as the macromolecular chain transfer agent (mCTA) of the polymerization. As confirmed by cryogenic transmission electron microscopy (cryoTEM), this approach yielded stabilized spherical micelles in aqueous dispersions where the PS block formed the hydrophobic core and the P(DMA-co-NIPAM) block formed the hydrophilic corona of the spherical micelle. The temperature-dependent behavior of the LCST-type diblock copolymers was further studied by examining the collapse of the P(DMA-co-NIPAM) minor block of the P(DMA-co-NIPAM)-b-PS diblock copolymers as a function of temperature in aqueous solution. The nanospheres were found to be thermosensitive by changing their hydrodynamic radii almost linearly as a function of temperature between 25 °C and 45 °C. The addition of kosmotropic salt anions, as a potentially useful tuning feature of micellar assemblies, was found to increase the hydrodynamic radius of the micelles and resulted in a faster collapse of the micelle corona upon heating.

Chitosan-Based Biocompatible Copolymers for Thermoresponsive Drug Delivery Systems: On the Development of a Standardization System

Chitosan is a natural polysaccharide that is considered to be biocompatible, biodegradable and non-toxic. The polymer has been used in drug delivery applications for its positive charge, which allows for adhesion with and recognition of biological tissues via non-covalent interactions. In recent times, chitosan has been used for the preparation of graft copolymers with thermoresponsive polymers such as poly-N-vinylcaprolactam (PNVCL) and poly-N-isopropylamide (PNIPAM), allowing the combination of the biodegradability of the natural polymer with the ability to respond to changes in temperature. Due to the growing interest in the utilization of thermoresponsive polymers in the biological context, it is necessary to increase the knowledge of the key principles of thermoresponsivity in order to obtain comparable results between different studies or applications. In the present review, we provide an overview of the basic principles of thermoresponsivity, as well as a description of the main polysaccharides and thermoresponsive materials, with a special focus on chitosan and poly-N-Vinyl caprolactam (PNVCL) and their biomedical applications.

High Adsorption of α-Glucosidase on Polymer Brush-Modified Anisotropic Particles Acquired by Electrospraying-A Combined Experimental and Simulation Study

In this particular contribution, we aim to immobilize a model enzyme such as α-glucosidase onto poly(DMAEMA) [poly(2-dimethyl amino ethyl methacrylate)] brush-modified anisotropic (cup- and disc-shaped) biocompatible polymeric particles. The anisotropic particles comprising a blend of PLA [poly(lactide)] and poly(MMA-co-BEMA) [poly((methyl methacrylate)-co-(2-(2-bromopropionyloxy) ethyl methacrylate)] were acquired by electrospraying, a scalable and convenient technique. We have also demonstrated the role of a swollen polymer brush grafted on the surface of cup-/disc-shaped particles via surface-initiated atom transfer radical polymerization in immobilizing an unprecedentedly high loading of enzyme [441 mg/g (cup)-589 mg/g (disc) of particles, 15-20 times higher than that of the literature-reported system] as compared to non-brush-modified particles. Circular dichroism spectroscopy was used to predict the structural changes of the enzyme upon immobilization onto the carrier particles. An enormously high amount of enzymes with preserved activity (∼85 ± 13% for cups and ∼78 ± 15% for discs) was found to adhere onto brush-modified particles at pH 7 via electrostatic adsorption. These findings were further explored at the atomistic level using a coarse-grained dissipative particle dynamics simulation approach, which exhibited excellent correlation with experimental results. In addition, accelerated particle separation was also achieved via magnetic force-induced aggregation within 20 min (without a centrifuge) by incorporating magnetic nanoparticles into disc-shaped particles while electrojetting. This further strengthens the technical feasibility of the process, which holds immense potential to be applied for various enzymes intended for several applications.

Constrained thermoresponsive polymers - new insights into fundamentals and applications

In the last decades, numerous stimuli-responsive polymers have been developed and investigated regarding their switching properties. In particular, thermoresponsive polymers, which form a miscibility gap with the ambient solvent with a lower or upper critical demixing point depending on the temperature, have been intensively studied in solution. For the application of such polymers in novel sensors, drug delivery systems or as multifunctional coatings, they typically have to be transferred into specific arrangements, such as micelles, polymer films or grafted nanoparticles. However, it turns out that the thermodynamic concept for the phase transition of free polymer chains fails, when thermoresponsive polymers are assembled into such sterically confined architectures. Whereas many published studies focus on synthetic aspects as well as individual applications of thermoresponsive polymers, the underlying structure-property relationships governing the thermoresponse of sterically constrained assemblies, are still poorly understood. Furthermore, the clear majority of publications deals with polymers that exhibit a lower critical solution temperature (LCST) behavior, with PNIPAAM as their main representative. In contrast, for polymer arrangements with an upper critical solution temperature (UCST), there is only limited knowledge about preparation, application and precise physical understanding of the phase transition. This review article provides an overview about the current knowledge of thermoresponsive polymers with limited mobility focusing on UCST behavior and the possibilities for influencing their thermoresponsive switching characteristics. It comprises star polymers, micelles as well as polymer chains grafted to flat substrates and particulate inorganic surfaces. The elaboration of the physicochemical interplay between the architecture of the polymer assembly and the resulting thermoresponsive switching behavior will be in the foreground of this consideration.

Multiresponsive Transitions of PDMAEMA Brushes for Tunable Surface Patterning

Poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) is an attractive polymer for switchable surface coatings based on its multiresponsiveness toward environmental triggers (temperature, pH-value, ionic strength). In this in situ study, we present the complex and tunable thermoresponsiveness of PDMAEMA Guiselin brushes (9 nm, dry thickness), which were prepared via an efficient grafting-to approach. Combining in situ atomic force microscopy (AFM) visualizing the surface topography (x-y plane) and spectroscopic ellipsometry monitoring the swelling behavior of the polymer film (layer thickness, z-direction) offers for the first time a three-dimensional insight into thermoresponsive transitions on the nanoscale. While PDMAEMA films exhibit LCST behavior in the presence of monovalent counterions, it can easily be switched toward an UCST thermoresponsiveness via the addition of small quantities of multivalent ions. In both cases, the transition temperature as well as the sharpness and reversibility of the transition can be tuned via a second external trigger, the ionic strength. Whereas homogeneous surfaces were observed both below and above the LCST in monovalent salt solutions, the UCST transition was characterized by the in situ formation of a nanostructured surface of pinned PDMAEMA micelles with entrapped multivalent counterions. Moreover, it was demonstrated for the first time that the characteristic dimensions of the nanopattern (the diameter and height of the pinned micelles) could be tuned in situ by the pH- and induced UCST thermoresponsiveness of PDMAEMA. This approach therefore provides a novel bottom-up strategy to create and control polymeric nanostructures in an aqueous environment.

Sustained delivery of anti-VEGFs from thermogel depots inhibits angiogenesis without the need for multiple injections

Polyurethane thermogels show sustained delivery of bioactive anti-VEGFs therapeutics to the eye.

Chitosan-based liposomal thermogels for the controlled delivery of pingyangmycin: design, optimization and in vitro and in vivo studies

Pingyangmycin (PYM) has been applied clinically for many years to treat vascular malformations (VM) in China. The major limitation of PYM injections is quick diffusion from the injection site, which increases side effects, especially the possibility of pulmonary injury. In this paper, chitosan/glycerophosphate disodium (CS/GP) thermogels containing liposomes for sustained and localized PYM delivery were prepared and optimized by a three-level three-factorial Box–Behnken experimental design to evaluate the effects of different variables (the PYM concentration, CS amount and GP content), on the selected responses (cumulative percentage PYM released in 1 day, 9 days and the rate constant k). The results revealed that the optimized PYM liposomal thermogels had a controlled PYM release for 14 days in vitro, which confirmed the validity of optimization. In vitro morphological observation, cell cycle and apoptosis analysis showed an effective anti-proliferation action of PYM liposomal thermogels on human vascular endothelial cells (EA.hy926). In vivo pharmacokinetics research in rabbits displayed that compared with PYM liposomes and PYM thermogels, PYM liposomal thermogels had a better controlled delivery of PYM. Histological examination of rabbit ear veins showed that after local application with PYM lipsomal thermogels for 21 days, obvious vein thrombosis and inflammatory reaction could be observed. The above results indicated that PYM-loaded lipsomal CS/GP thermogels might have a good prospect for the treatment of VM.

A Recent Perspective on Noncovalently Formed Polymeric Hydrogels

Chemically crosslinked covalent hydrogels form a permanent and often strong network, and have been extensively used so far in drug delivery and tissue engineering. However, it is more difficult to induce dynamic and highly tunable changes in these hydrogels. Noncovalently formed hydrogels show promise as inherently reversible systems with an ability to change in response to dynamic environments, and have garnered strong interest recently. In this Personal Account, we elucidate a few key attractive properties of noncovalent hydrogels and describe recent developments in hydrogels crosslinked using various different noncovalent interactions. These hydrogels offer huge control for modulating material properties and could be more relevant mimics for biological systems.

Characterization of Initial Cell Adhesion on Charged Polymer Substrates in Serum-Containing and Serum-Free Media

Charged substrates are expected to promote cell adhesion via electrostatic interaction, but it remains unclear how cells adhere to these substrates. Here, initial cell adhesion (<30 min) was re-examined on charged substrates in serum-containing and serum-free media to distinguish among various cell adhesion mechanisms (i.e., electrostatic interaction, hydrophobic interaction, and biological interaction). Cationic and anionic methacrylate copolymers were coated on nonionic nontissue culture-treated polystyrene to create charged substrates. Cells adhered similarly on cationic, anionic, and nonionic substrates in serum-free medium via integrin-independent mechanisms, but their adhesion forces differed (anionic > cationic > nonionic substrates), indicating that cell adhesion is not mediated solely by the cells' negative charge. In serum-containing medium, the cells adhered minimally on anionic and nonionic substrates, but they adhered abundantly on cationic substrates via both integrin-dependent and -independent mechanisms. These results suggest that neither electrostatic force nor protein adsorption is accountable for cell adhesion. Conclusively, the observed phenomena revealed a gap in the generally accepted understanding of cell adhesion mechanisms on charged polymeric substrates. A reanalysis of their mechanisms is necessary.

Biocompatible and mechanically robust nanocomposite hydrogels for potential applications in tissue engineering

The synergistic contributions of nanofillers and polymer matrix induce remarkable properties in nanocomposite hydrogels. Present article reports the facile synthesis of biocompatible nanocomposite hydrogels using microporous multi wall carbon nanotubes (MWCNTs) dispersed chitosan (CH)-Acrylonitrile (AN), N,N'-methylenebisacrylamide (MBAAm) and linseed polyol through solution blending method. Polyol and N,N'-methylenebisacrylamide (MBAAm) was used as the crosslinking agent. The structural characterization and formation of highly crosslinked network with dendrimer morphology was confirmed by FT-IR and scanning electron microscope (SEM) analysis. In addition, transmission electron microscope (TEM) was employed to visualize the size and proper dispersion of MWCNT in the polymer matrices. The strong mechanical strength exhibited by these hydrogel films was confirmed by the tensile strength analysis. The dispersion of the conductive nanofillers, like MWCNTs has significantly enhanced the strength, which revealed unique characteristics of these hydrogel films. The high swelling capacity and sustained expansion of hydrogel films were confirmed in the buffer solutions of pH4 and 7.4. The biodegradability of these films was estimated by hydrolytic and soil burial tests. The biocompatibility test was conducted on Human Embryonic Kidney (HEK-293) cell line, which confirmed the non-toxic and biocompatible nature of these films. Incorporation of carbon nanotubes (MWCNTs) in the polymer matrix enhanced the film forming properties, high modulus and tensile strength, swelling ability, biodegradable and biocompatibility. These properties can be finely tuned through the variation of MWCNT concentrations, as a result these nanostructure hydrogel films have potential scope for their diverse applications in the field of tissue engineering.

Multi-responsive hydrogels with UCST- and LCST-induced shrinking and controlled release behaviors of rhodamine B

By using a disulfide-functionalized crosslinker, a pH- and thermo-responsive 2-(dimethylamino) ethyl methacrylate (DMAEMA) monomer and a zwitterionic sulfobetaine methacrylate (SBMA) monomer were conjugated to fabricate a multi-responsive P(DMAEMA-SS-SBMA) copolymeric hydrogel. Apparent UCST and LCST volume transitions were observed in the P(DMAEMA-SS-SBMA) hydrogels with equivalent weight fractions of monomers. Different pore size and response sensitivity of shrunken structures below UCST and above LCST were visualized by SEM images. The hydrogel exhibited a highly swollen state with a swelling ratio of 17.8 and a pore size of 106μm at 45°C, they deswelled unequally at 5°C with a compact surface with pore size of 30μm and a loose bulk with pore size of 83μm, while they deswelled uniformly at 65°C with dense shrunken structure with small pore size of 12μm. The dual-thermoresponsive hydrogel was promising in controlled drug release. The initial drug release was predominantly controlled by diffusion, and the long-term release was influenced by the swelling ratio. Below UCST, the relatively hydrophilic shrunken structure and slow diffusion had a synergistic effect on the sustained release. Above LCST, the fast diffusion and the rapid "off" effect of hydrophobic skin layer resulted in a burst release. Additionally, pH-tunable swelling and redox-sensitive degradation were also observed.

PCL-based thermo-gelling polymers for in vivo delivery of chemotherapeutics to tumors

The synthesis of a multiblock poly(ether ester urethane)s comprising poly(ε-caprolactone), poly(ethylene glycol), and poly(propylene glycol) segments is described. We found that this polymer possessed a critical thermo-gelation concentration of 4wt%. Molecular characterization of the polymer was performed in terms of molecular weight determination, chemical composition elucidation and functional group determination using GPC, NMR, and FTIR. We carried out in vitro paclitaxel and doxorubicin release studies and demonstrated that sustained therapeutic release of about 2weeks can be obtained with this system. A nude mice model of tumor was developed and intratumoral injection of therapeutic-loaded thermo-gel demonstrated that PTX-loaded thermo-gel effectively inhibited the growth of tumors.

Review of Adaptive Programmable Materials and Their Bioapplications

Adaptive programmable materials have attracted increasing attention due to their high functionality, autonomous behavior, encapsulation, and site-specific confinement capabilities in various applications. Compared to conventional materials, adaptive programmable materials possess unique single-material architecture that can maintain, respond, and change their shapes and dimensions when they are subjected to surrounding environment changes, such as alternation in temperature, pH, and ionic strength. In this review, the most-recent advances in the design strategies of adaptive programmable materials are presented with respect to different types of architectural polymers, including stimuli-responsive polymers and shape-memory polymers. The diverse functions of these sophisticated materials and their significance in therapeutic agent delivery systems are also summarized in this review. Finally, the challenges for facile fabrication of these materials and future prospective are also discussed.

Modification of Thermal and Mechanical Properties of PEG-PPG-PEG Copolymer (F127) with MA-POSS

Pluronic F127 exhibits thermogelling behaviour at 20⁻30 °C via a micelle packing mechanism. Disruption of the micelle packing increases the sol-gel temperature, but results in the decrease of modulus. Herein, we reported a method to modify F127 with polyhedral oligosilsesquioxane (POSS) to impart a higher gelling temperature without yielding the property and strength of the thermogel. The thermal degradation temperature was enhanced to 15 °C after POSS incorporation and the gelling temperature shifted 10 °C higher, without sacrificing the modulus of the gel. Rheological studies supported the claim that the gel property was reinforced after POSS incorporation. F127-POSS copolymer matrix stored more energy from POSS reinforcement, which saw larger Lissajous curve areas before the collapse of the microstructure for the same amount of stress applied. These results indicated that modification with POSS would raise the sol-gel transition temperature without sacrificing the modulus of the gel.

Four-Dimensional (4D) Printing in Consumer Applications

Modern manufacturing primarily utilizes direct assembly techniques, limiting the possibility of error correction or instant modification of a structure. There is a growing need to program physical materials to build themselves. Adaptive materials are programmable physical or biological materials which possess shape changing properties or can be made to have simple logic responses. There are computer programs that allow the design of nano-robots that self-assemble into functional structures for drug delivery applications. There is immense potential in having disorganized fragments form an ordered construct through physical interactions. However, these are only self-assembly at the smallest scale, typically at the nanoscale. The answer to customizable macrostructures is in additive manufacturing, or 3D printing. 3D printing has been around for almost 30 years now and is starting to filter into the public arena. The main challenges are that 3D printers have been too inefficient, inaccessible, and slow. Cost is also a significant factor in the adoption of this technology. 3D printing has the potential to transform and disrupt the manufacturing landscape as well as our lives. 4D printing seeks to use multi-functional materials in 3D printing so that the printed structure has multiple response capabilities and is able to self-assemble at the macroscale. In this chapter, I will analyze the early promise of this technology as well as highlight potential challenges that adopters could face.

Smart material platforms for miniaturized devices: implications in disease models and diagnostics

Smart materials are responsive to multiple stimuli like light, temperature, pH and redox reactions with specific changes in state. Various functionalities in miniaturised devices can be achieved through the application of "smart materials" that respond to changes in their surroundings. The change in state of the materials in the presence of a stimulus may be used for on demand alteration of flow patterns in devices, acting as microvalves, as scaffolds for cellular aggregation or as modalities for signal amplification. In this review, we discuss the concepts of smart trigger responsive materials and their applications in miniaturized devices both for organ-on-a-chip disease models and for point-of-care diagnostics. The emphasis is on leveraging the smartness of these materials for example, to allow on demand sample actuation, ion dependent spheroid models for cancer or light dependent contractility of muscle films for organ-on-a-chip applications. The review throws light on the current status, scope for technological enhancements, challenges for translation and future prospects of increased incorporation of smart materials as integral parts of miniaturized devices.

A Thixotropic Polyglycerol Sebacate-Based Supramolecular Hydrogel as an Injectable Drug Delivery Matrix

We have developed a "self-healing" polyglycerol sebacate-polyethylene glycol methyl ether methacrylate (PGS-PEGMEMA)/α-Cyclodextrin (αCD) hydrogel which could be sheared into a liquid during injection and has the potential to quickly "heal" itself back into gel post-injection. This hydrogel was shown to be biocompatible and biodegradable and therefore appropriate for use in vivo. Furthermore, the storage and loss moduli of the hydrogels could be tuned (by varying the concentration of αCD) between a fraction of a kPa to a few 100 kPa, a range that coincides with the moduli of cells and human soft tissues. This property would allow for this hydrogel to be used in vivo with maximal mechanical compatibility with human soft tissues. In vitro experiments showed that the hydrogel demonstrated a linear mass erosion profile and a biphasic drug (doxorubicin) release profile: Phase I was primarily driven by diffusion and Phase II was driven by hydrogel erosion. The diffusion mechanism was modeled with the First Order equation and the erosion mechanism with the Hopfenberg equation. This established fitting model could be used to predict releases with other drugs and estimate the composition of the hydrogel required to achieve a desired release rate.

Highly lipophilic pluronics-conjugated polyamidoamine dendrimer nanocarriers as potential delivery system for hydrophobic drugs

In the study, four kinds of pluronics (P123, F68, F127 and F108) with varying hydrophilic-lipophilic balance (HLB) values were modified and conjugated on 4th generation of polyamidoamine dendrimer (PAMAM). The obtained results from FT-IR, ¹H NMR and GPC showed that the pluronics effectively conjugated on the dendrimer. The molecular weight of four PAMAM G4.0-Pluronics and its morphologies are in range of 200.15-377.14kDa and around 60-180nm in diameter by TEM, respectively. Loading efficiency and release of hydrophobic fluorouracil (5-FU) anticancer drug were evaluated by HPLC; Interesting that the dendrimer nanocarrier was conjugated with the highly lipophilic pluronic P123 (G4.0-P123) exhibiting a higher drug loading efficiency (up to 76.25%) in comparison with another pluronics. Live/dead fibroblast cell staining assay mentioned that all conjugated nanocarriers are highly biocompatible. The drug-loaded nanocarriers also indicated a highly anti-proliferative activity against MCF-7 breast cancer cell. The obtained results demonstrated a great potential of the highly lipophilic pluronics-conjugated nanocarriers in hydrophobic drugs delivery for biomedical applications.

Nanodelivery systems for enhancing the immunostimulatory effect of CpG oligodeoxynucleotides

Synthetic oligodeoxynucleotides containing immunostimulatory CpG motif mimic bacterial DNA and are potent activator of innate and adaptive immune responses. Therefore, CpG ODNs have significant potentials as immunotherapeutic agent for treatment of infectious diseases, allergy and cancer. Many clinical trials involving CpG ODNs either used alone or as adjuvant have been initiated. However, delivery of CpG ODNs to target sites still remains a great challenge due to their extreme susceptibility to nuclease degradation in serum and poor cellular uptake. Chemical modification of CpG ODNs backbone can protect them against degradation by nucleases, but have raised concern regarding several severe side effects. Development of efficient CpG ODNs delivery systems to address these issues and enhance their immunostimulatory effect are highly desirable. In recent years, the emergence of nanotechnology has provided unprecedented opportunities to encapsulate CpG ODN into various nanocarriers or synthesize CpG ODNs nanostructures. This review provides an overview of the delivery systems based on nanomaterials and nanostructures newly developed for enhancing the immunostimulatory effect of CpG ODNs, together with a brief discussion on perspectives for future studies in this field.

Composite System of Graphene Oxide and Polypeptide Thermogel As an Injectable 3D Scaffold for Adipogenic Differentiation of Tonsil-Derived Mesenchymal Stem Cells

As two-dimensional (2D) nanomaterials, graphene (G) and graphene oxide (GO) have evolved into new platforms for biomedical research as biosensors, imaging agents, and drug delivery carriers. In particular, the unique surface properties of GO can be an important tool in modulating cellular behavior and various biological sequences. Here, we report that a composite system of graphene oxide/polypeptide thermogel (GO/P), prepared by temperature-sensitive sol-to-gel transition of a GO-suspended poly(ethylene glycol)-poly(L-alanine) (PEG-PA) aqueous solution significantly enhances the expression of adipogenic biomarkers, including PPAR-γ, CEBP-α, LPL, AP2, ELOVL3, and HSL, compared to both a pure hydrogel system and a composite system of G/P, graphene-incorporated hydrogel. We prove that insulin, an adipogenic differentiation factor, preferentially adhered to GO, is supplied to the incorporated stem cells in a sustained manner over the three-dimensional (3D) cell culture period. On the other hand, insulin is partially denatured in the presence of G and interferes with the adipogenic differentiation of the stem cells. The study suggests that a 2D/3D composite system is a promising platform as a 3D cell culture matrix, where the surface properties of 2D materials in modulating the fates of the stem cells are effectively transcribed in a 3D culture system.

Functional biomedical hydrogels for in vivo imaging

In vivo imaging of biomedical hydrogels enables real-time and non-invasive visualization of the status of structure and function of hydrogels.

Recent development of unimolecular micelles as functional materials and applications

Unimolecular micelles have high functionalities, encapsulation capabilities and site specific confinement abilities in various applications.