Nanocoating for biomolecule delivery using layer-by-layer self-assembly

Light-responsive functional nanomaterials as pioneering therapeutics: a paradigm shift to combat age-related disorders

Aging, marked by dysregulated cellular systems, gives rise to a spectrum of age-related disorders, including neurodegeneration, atherosclerosis, immunosenescence, and musculoskeletal issues. These conditions contribute significantly to the global disease burden, posing challenges to health span and economic resources. Current therapeutic approaches, although diverse in mechanism, often fall short in targeting the underlying cellular pathologies. They fail to address the issues compounded by altered pharmacokinetics in the elderly. Nanotechnology emerges as a transformative solution, offering tissue-specific targeted therapies through nanoparticles. Functional nanomaterials (FNMs) respond to internal or external stimuli, with light-responsive nanomaterials gaining prominence. Harnessing the benefits of deep tissue penetration and ease of manipulation particularly in the near-infrared spectrum, light-responsive FNMs present innovative strategies for age-related comorbidities. This review comprehensively summarizes the potential of light-responsive FNM-based approaches for targeting cellular environments in age-related disorders, and also emphasizes the advantages over traditional treatment modalities. Specifically, it focuses on the development of various classes of light-responsive functional nanomaterials including plasmonic nanomaterials, nanomaterials as carriers, upconversion nanomaterials, 2D nanomaterials, transition metal oxide and dichalcogenide nanomaterials and carbon-based nanomaterials against age related diseases. We foresee that such advanced developments in the field of nanotechnology could provide a new hope for clinical diagnosis and treatment of age-related disorders.

Chitosan/bovine serum albumin layer-by-layer assembled particles for non-invasive inhaled drug delivery to the lungs

Layer-by-Layer (LbL) assembly of polyelectrolytes on a solid core particle is a well-established technique used to deliver drugs, proteins, regenerative medicines, combinatorial therapy, etc. It is a multifunctional delivery system which can be engineered using various core template particles and coating polymers. This study reports the development and in-vitro evaluation of LbL assembled particles for non-invasive inhaled delivery to the lungs. The LbL assembled particles were prepared by successively coating polyelectrolyte macromolecules, glycol chitosan and bovine serum albumin on 0.5- and 4.5-μm polystyrene particles. The LbL assembly of polyelectrolytes was confirmed by reversible change in zeta potential and sequential increase in the particle size after accumulation of the layer. The prepared LbL particles were further assessed for aerodynamic properties using two distinct nebulizers, and toxicity assessment in normal lung cells. The in-vitro aerosolization study performed using next generation impactor coupled with Pari LC Plus and Aeroeclipse nebulizer showed that both the LbL assembled 0.5 and 4.5-μm particles had MMAD <5 μm confirming suitable aerodynamic properties for non-invasive lung delivery. The in-vitro cytotoxicity, and TEER integrity following treatment with the LbL assembled particles in normal lung epithelial and fibroblasts showed no significant cytotoxicity rendering the LbL assembled particles safe. This study extends the efficiency of LbL assembled particles for novel applications towards delivery of small and large molecules into the lungs.

Toward chronopharmaceutical drug delivery patches and biomaterial coatings for the facilitation of wound healing

Implantation of a biomaterial entails a form of injury where the integration of the implant into the host tissue greatly depends on the proper healing of the wound. Wound healing, itself, consists of a number of physiological processes, each occurring within a characteristic time window. A composite, multilayered polymeric drug delivery carrier for adhesion to the wound site and its supply with molecules released at precise time windows at which the stages in the healing process that they target occur is conceptualized here. We also present a simplified version of one such multilayered composite fabricated by a combination of solvent casting and dip coating, comprising the base poly(ε-caprolactone) layer reinforced with hydroxyapatite nanoparticles, poly(glutamic acid) mesolayer and poly-l-lysine surface layer, each loaded with specific small molecules and released at moderately distinct timescales, partially matching the chronology of wound healing. To that end, the base layer proved suitable for the delivery of an anti-inflammatory molecule or an angiogenic agent, the mesolayer appeared appropriate for the delivery of an epithelialization promoter or a granulation factor, and the adhesive surface layer interfacing directly with the site of injury showed promise as a carrier of a vasodilator. The drug release mechanisms were diffusion-driven, suggesting that the drug/carrier interaction is a key determinant of the release kinetics, as important as the nature of the polymer and its hydrolytic degradation rate in the aqueous medium. Morphological and phase composition analyses were performed, along with the cell compatibility ones, demonstrating solid adhesion and proliferation of both transformed and primary fibroblasts on both surfaces of the composite films. The design of the multilayered composite drug delivery carriers presented here is prospective, but requires further upgrades to achieve the ideal of a perfect timing of the sequential drug release kinetics and a perfect resonance with the physiological processes defining the chronology of wound healing.

Multifunctional Layer-by-Layer Coating Based on a New Amphiphilic Block Copolymer via RAFT-Mediated Polymerization-Induced Self-Assembly Process

In this hi-tech world, the "smart coatings" have sparked significant attention among materials scientists because of their versatile applications. Various strategies have been developed to generate smart coatings in the past 2 decades. The layer-by-layer (LbL) technique is the most commonly employed strategy to produce a smart coating for suitable applications. Here, we present a smart coating with healing, antifogging, and fluorescence properties fabricated by the LbL assembly of an anionic amphiphilic block copolymer latex and cationic inorganic POSS (polyhedral-oligomeric-silsesquioxane) nanoparticles. In this case, a new anionic block copolymer (BCP), {poly(sodium styrene sulfonate)-block-poly[2-(acetoacetoxy)ethyl methacrylate]}, (PSS-b-PAAEMA) was synthesized via surfactant-free RAFT-mediated emulsion polymerization using the PISA technique. The PSS-b-PAAEMA was characterized by ¹H NMR, dynamic light scattering, scanning electron microscopy, and transmission electron microscopy analyses as well as by UV-vis and photoluminescence spectroscopy. For LbL coating fabrication, an amine-modified glass was successively dipped in the anionic latex and cationic POSS solution. The transparent coating exhibited good fluorescence properties under UV light (blue color). The antifogging performance of the coating was also investigated using both cold-warm and hot-vapor techniques. Additionally, the coating surface showed a significant healing activity with a healing efficiency of >75% through ionic interaction. Thus, this finding provides a simple low volatile organic compound (VOC) water-based LbL coating with multifunctional properties that can be a potential material for versatile applications.

Organoids of the male reproductive system: Challenges, opportunities, and their potential use in fertility research

Organoids are units of function of a given organ able to reproduce, in culture, a biological structure similar in architecture and function to its counterpart in vivo. Today, it is possible to develop an organoid from a fragment of tissue, a stem cell located in an adult organ, an embryonic stem cell, or an induced pluripotent stem cell. In the past decade, many organoids have been developed which mimic stomach, pancreas, liver and brain tissues, optic cups, among many others. Additionally, different male reproductive system organs have already been developed as organoids, including the prostate and testis. These 3D cultures may be of great importance for urological cancer research and have the potential to be used in fertility research for the study of spermatozoa production and maturation, germ cells-somatic cells interactions, and mechanisms of disease. They also provide an accurate preclinical pipeline for drug testing and discovery, as well as for the study of drug resistance. In this work, we revise the current knowledge on organoid technology and its use in healthcare and research, describe the male reproductive system organoids and other biomaterials already developed, and discuss their current application. Finally, we highlight the research gaps, challenges, and opportunities in the field and propose strategies to improve the use of organoids for the study of male infertility situations. This article is categorized under: Reproductive System Diseases > Stem Cells and Development Reproductive System Diseases > Biomedical Engineering.

Strategies To Modify the Surface and Bulk Properties of 3D-Printed Solid Scaffolds for Tissue Engineering Applications

3D printing is one of the effective scaffold fabrication techniques that emerged in the 21st century that has the potential to revolutionize the field of tissue engineering. The solid scaffolds developed by 3D printing are still one of the most sought-after approaches for developing hard-tissue regeneration and repair. However, applications of these solid scaffolds get limited due to their poor surface and bulk properties, which play a significant role in tissue integration, loadbearing, antimicrobial/antifouling properties, and others. As a result, several efforts have been directed to modify the surface and bulk of these solid scaffolds. These modifications have significantly improved the adoption of 3D-printed solid scaffolds and devices in the healthcare industry. Nevertheless, the in vivo implant applications of these 3D-printed solid scaffolds/devices are still under development. They require attention in terms of their surface/bulk properties, which dictate their functionality. Therefore, in the current review, we have discussed different 3D-printing parameters that facilitate the fabrication of solid scaffolds/devices with different properties. Further, changes in the bulk properties through material and microstructure modification are also being discussed. After that, we deliberated on the techniques that modify the surfaces through chemical and material modifications. The computational approaches for the bulk modification of these 3D-printed materials are also mentioned, focusing on tissue engineering. We have also briefly discussed the application of these solid scaffolds/devices in tissue engineering. Eventually, the review is concluded with an analysis of the choice of surface/bulk modification based on the intended application in tissue engineering.

Bioactivity, Molecular Mechanism, and Targeted Delivery of Flavonoids for Bone Loss

Skeletal disabilities are a prominent burden on the present population with an increasing life span. Advances in osteopathy have provided various medical support for bone-related diseases, including pharmacological and prosthesis interventions. However, therapeutics and post-surgery complications are often reported due to side effects associated with modern-day therapies. Thus, therapies utilizing natural means with fewer toxic or other side effects are the key to acceptable interventions. Flavonoids constitute a class of bioactive compounds found in dietary supplements, and their pharmacological attributes have been well appreciated. Recently, flavonoids' role is gaining renowned interest for its effect on bone remodeling. A wide range of flavonoids has been found to play a pivotal role in the major bone signaling pathways, such as wingless-related integration site (Wnt)/β-catenin, bone morphogenetic protein (BMP)/transforming growth factor (TGF)-β, mitogen-activated protein kinase (MAPK), etc. However, the reduced bioavailability and the absorption of flavonoids are the major limitations inhibiting their use against bone-related complications. Recent utilization of nanotechnological approaches and other delivery methods (biomaterial scaffolds, micelles) to target and control release can enhance the absorption and bioavailability of flavonoids. Thus, we have tried to recapitulate the understanding of the role of flavonoids in regulating signaling mechanisms affecting bone remodeling and various delivery methods utilized to enhance their therapeutical potential in treating bone loss.

Chemical Sensor Nanotechnology in Pharmaceutical Drug Research

The increase in demand for pharmaceutical treatments due to pandemic-related illnesses has created a need for improved quality control in drug manufacturing. Understanding the physical, biological, and chemical properties of APIs is an important area of health-related research. As such, research into enhanced chemical sensing and analysis of pharmaceutical ingredients (APIs) for drug development, delivery and monitoring has become immensely popular in the nanotechnology space. Nanomaterial-based chemical sensors have been used to detect and analyze APIs related to the treatment of various illnesses pre and post administration. Furthermore, electrical and optical techniques are often coupled with nano-chemical sensors to produce data for various applications which relate to the efficiencies of the APIs. In this review, we focus on the latest nanotechnology applied to probing the chemical and biochemical properties of pharmaceutical drugs, placing specific interest on several types of nanomaterial-based chemical sensors, their characteristics, detection methods, and applications. This study offers insight into the progress in drug development and monitoring research for designing improved quality control methods for pharmaceutical and health-related research.

Biocides and techniques for their encapsulation: a review

Biocides are compounds that are broadly used to protect products and equipment against microbiological damage. Encapsulation can effectively increase physicochemical stability and allow for controlled release of encapsulated biocides. We categorized microencapsulation into coacervation, sol-gel, and self-assembly methods. The former comprises internal phase separation, interfacial polymerization, and multiple emulsions, and the latter include polymersomes and layer-by-layer techniques. The focus of this review is the description of these categories based on their microencapsulation methods and mechanisms. We discuss the key features and potential applications of each method according to the characteristics of the biocide to be encapsulated, relating the solubility of biocides to the capsule-forming materials, the reactivity between them and the desired release rate. The role of encapsulation in the safety and toxicity of biocide applications is also discussed. Furthermore, future perspectives for biocide applications and encapsulation techniques are presented.

Glycopolymer based LbL Multilayer Thin Films with Embedded Liposomes

Layer-by-layer (LbL) self-assembly emerged as an efficient technique for fabricating coating systems for, e.g., drug delivery systems with great versatility and control. In this work, we describe protecting group free and aqueous-based syntheses of bioinspired glycopolymer electrolytes. Thin films of the glycopolymers are fabricated by LbL self-assembly and function as scaffolds for liposomes, which potentially can encapsulate active substances. We investigate the adsorbed mass, pH stability and integrity of glycopolymer coatings as well as the embedded liposomes via whispering gallery mode (WGM) technology and quartz crystal microbalance with dissipation (QCM-D) monitoring, which enable label-free characterization. Glycopolymer thin films, with and without liposomes, are stable in the physiological pH range. QCM-D measurements verify the integrity of lipid vesicles. Thus, we present the fabrication of glycopolymer-based surface coatings with embedded and intact liposomes. This article is protected by copyright. All rights reserved.

Recent progress in Tannic Acid-driven antimicrobial/antifouling surface coating strategies

Medical devices and surgical implants are a necessary part of tissue engineering and regenerative medicines. However, the biofouling and microbial colonization on the implant surface continues to be a major...

Resveratrol-β-Lactoglobulin Composite Nanocoating by Layer-by-Layer Assembly with Fe(III)-Tannic Acid Complex

Resveratrol (3,4',5-trihydroxystilbene) is beneficial to human health due to its diverse biological activities including its anti-inflammatory and anti-oxidative effects as confirmed by pharmacokinetic tests. Despite these clinical merits, resveratrol's limited hydrosolubility and chemical vulnerability remain challenging with regard to developing a controlled delivery system with enhanced bioavailability. In this work, we report a resveratrol-β-lactoglobulin (R-BLG) composite nanocoating through a layer-by-layer assembly with Fe(III)-tannic acid nanofilms. The R-BLG composite nanocoating can be formed in planar and particulate substrates, showing excellent film stability under a broad range of pH values and against enzymatic digestion during a weeklong incubation. We envision that the proteinaceous nanocoating herein could be combined with existing pharmaceutical carrier materials (e. g., microcapsules and nanoparticles) to realize advanced drug delivery systems with an expanded repertoire of hydrophobic drugs.

Fabrication of pure-drug microneedles for delivery of montelukast sodium

Dissolving microneedle (MN) patches are usually formulated with a blend of drug and excipients added for mechanical strength and drug stabilization. In this study, we developed MNs made of pure drug to maximize drug loading capacity. MN patches were fabricated for transdermal delivery of montelukast sodium (MS) which is used to treat asthma and allergic rhinitis. We developed three different fabrication methods - solvent casting, melt casting, and solvent washing - and determined that filling molds with MS powder followed by a solvent washing method enabled MS to be loaded selectively to the MNs. Drug localization was confirmed with Raman imaging. MNs were able to penetrate in vitro and ex vivo skin models, and maintained strong mechanical properties during 6 months' storage at 22 °C. MS was also stable and compatible with the formulation used for the patch backing layer after 3 months' storage at 40 °C. MS delivery efficiency into skin was 55%, which enabled delivery of 3.2 mg MS into porcine skin ex vivo, which is in the range of MS doses in human clinical use. We conclude that the solvent washing method can be used to prepare MNs containing pure drug, such as MS at milligram doses in a ~ 1 cm² MN patch.

Antibacterial and Osteoinductive Implant Surface Using Layer-by-Layer Assembly

Osseointegration of dental, craniofacial, and orthopedic implants is critical for their long-term success. Multifunctional surface treatment of implants was found to significantly improve cell adhesion and induce osteogenic differentiation of dental-derived stem cells in vitro. Moreover, local and sustained release of antibiotics via nanolayers from the surface of implants can present unparalleled therapeutic benefits in implant dentistry. Here, we present a layer-by-layer surface treatment of titanium implants capable of incorporating BMP-2-mimicking short peptides and gentamicin to improve their osseointegration and antibacterial features. Additionally, instead of conventional surface treatments, we employed polydopamine coating before layer-by-layer assembly to initiate the formation of the nanolayers on rough titanium surfaces. Cytocompatibility analysis demonstrated that modifying the titanium implant surface with layer-by-layer assembly did not have adverse effects on cellular viability. The implemented nanoscale coating provided sustained release of osteoinductive peptides with an antibacterial drug. The surface-functionalized implants showed successful osteogenic differentiation of periodontal ligament stem cells and antimicrobial activity in vitro and increased osseointegration in a rodent animal model 4 wk postsurgery as compared with untreated implants. Altogether, our in vitro and in vivo studies suggest that this approach can be extended to other dental and orthopedic implants since this surface functionalization showed improved osseointegration and an enhanced success rate.

Anti-biofouling assembly strategies for protein & cell repellent surfaces: a mini-review

The protein/cell interactions with the surface at the blood-biomaterial interface generally control the efficiency of biomedical devices. A wide range of active processes and slow kinetics occur simultaneously with many biomaterials in healthcare applications, leading to multiple biological reactions and reduced clinical functions. In this work, we present a brief review of studies as the interface between proteins and biomaterials. These include mechanisms of resistance to proteins, protein-rejecting polyelectrolyte multilayers, and coatings of hydrophilic, polysaccharide and phospholipid nature. The mechanisms required to attain surfaces that resist adhesion include steric exclusion, water-related effects, and volume effects. Also, approaches in the use of hydrophilic, highly hydrated, and electrically neutral coatings have demonstrated a good ability to decrease cell adhesion. Moreover, amongst the available methods, the approach of layer-by-layer deposition has been known as an interesting process to manipulate protein and cell adhesion behavior.

Biologics and their delivery systems: Trends in myocardial infarction

Cardiovascular disease is the leading cause of death around the world, in which myocardial infarction (MI) is a precipitating event. However, current therapies do not adequately address the multiple dysregulated systems following MI. Consequently, recent studies have developed novel biologic delivery systems to more effectively address these maladies. This review utilizes a scientometric summary of the recent literature to identify trends among biologic delivery systems designed to treat MI. Emphasis is placed on sustained or targeted release of biologics (e.g. growth factors, nucleic acids, stem cells, chemokines) from common delivery systems (e.g. microparticles, nanocarriers, injectable hydrogels, implantable patches). We also evaluate biologic delivery system trends in the entire regenerative medicine field to identify emerging approaches that may translate to the treatment of MI. Future developments include immune system targeting through soluble factor or chemokine delivery, and the development of advanced delivery systems that facilitate the synergistic delivery of biologics.

Construction and Application of EGCG-Loaded Lysozyme/Pectin Nanoparticles for Enhancing the Resistance of Nematodes to Heat and Oxidation Stresses

Novel nanoparticles (NPs) were constructed with lysozyme (LY) and pectin (Ps) through self-assembly, which were used as a carrier to encapsulate epigallocatechin-3-gallate (EGCG). The binding of EGCG and LY is a static quenching process. Hydrogen bonds might play a major role in the formation of NPs, which has also been verified by a lower binding constant of EGCG with LY/Ps NPs. Meanwhile, EGCG could lead to conformational and microenvironmental changes of LY, resulting in more folding of LY secondary structures. In addition, attaching Ps to LY might inhibit LY aggregation induced by addition of free EGCG. At the LY/Ps mass ratio of 1:1, the constructed LY/Ps NPs had a high EGCG-loading capacity without a significant change in mean particle size, thus, our NPs could be used as an effective nanocarrier for loading EGCG. In vivo, compared with free EGCG, EGCG loaded onto LY/Ps NPs significantly increased Caenorhabditis elegans’ (C. elegans) resistance to heat stress and oxidative injury and prolonged their lifespan. This study provides theoretical basis and reference for constructing nanoactive substance carriers so as to improve the resistance of organisms to heat stress and oxidative damage and to increase their survival rate and extend their lifespan under environment stresses.

Polyelectrolyte Multilayers on Soft Colloidal Nanosurfaces: A New Life for the Layer-By-Layer Method

The Layer-by-Layer (LbL) method is a well-established method for the assembly of nanomaterials with controlled structure and functionality through the alternate deposition onto a template of two mutual interacting molecules, e.g., polyelectrolytes bearing opposite charge. The current development of this methodology has allowed the fabrication of a broad range of systems by assembling different types of molecules onto substrates with different chemical nature, size, or shape, resulting in numerous applications for LbL systems. In particular, the use of soft colloidal nanosurfaces, including nanogels, vesicles, liposomes, micelles, and emulsion droplets as a template for the assembly of LbL materials has undergone a significant growth in recent years due to their potential impact on the design of platforms for the encapsulation and controlled release of active molecules. This review proposes an analysis of some of the current trends on the fabrication of LbL materials using soft colloidal nanosurfaces, including liposomes, emulsion droplets, or even cells, as templates. Furthermore, some fundamental aspects related to deposition methodologies commonly used for fabricating LbL materials on colloidal templates together with the most fundamental physicochemical aspects involved in the assembly of LbL materials will also be discussed.

Biopolymer surface modification of PLGA fibers enhances interfacial shear strength and supports immobilization of rhGDF-5 in fiber-reinforced brushite cement

Incorporation of biodegradable poly(lactic-co-glycolic acid; PLGA) fibers into calcium phosphate cements (CPCs) has proven beneficial for their mechanical properties and the targeted delivery of bone morphogenetic proteins (BMPs). However, the deficiency of functional groups on the PLGA surface results in poor fiber-matrix interfacial strength (ISS), limiting the mechanical improvement, and insufficient surface charge to immobilize therapeutic amounts of BMPs. The present study therefore focused on the: i) functionalization of PLGA fibers using polyelectrolyte multilayers (PEMs) of biopolymers; ii) analysis of their impact on the mechanical properties of the CPC in multifilament fiber pull-out tests; and iii) testing of their applicability as carriers for BMPs using chemical-free adsorption of biotinylated recombinant human growth factor (rhGDF-5) and colorimetric assays. The PEMs were created from chitosan (Chi), hyaluronic acid (HA), and gelatin (Gel) via layer-by-layer (LbL) deposition. Four PEM nanocoatings consisting of alternating Chi/Gel and Chi/HA bilayers with a terminating layer of Chi, Gel or HA were tested. Nanocoating of the PLGA fibers with PEMs significantly enhanced the ISS with the CPC matrix to max. 3.55 ± 1.05 MPa (2.2-fold). The increase in ISS, ascribed to enhanced electrostatic interactions between PLGA and calcium phosphate, was reflected in significant improvement of the composites' flexural strength compared to CPC containing untreated fibers. However, only minor effects on the composites' work of fracture were observed. The adsorption of rhGDF-5 on the PLGA surface was supported by PEMs terminating with either positive or negative charges, without significant differences among the nanocoatings. This proof-of-principle rhGDF-5 immobilization study, together with the augmented ISS of the composites, demonstrates that surface modification of PLGA fibers with biopolymers is a promising approach for targeted delivery of BMPs and improved mechanical properties of the fiber-reinforced CPC.

Organic Thin-Film Transistors as Gas Sensors: A Review

Organic thin-film transistors (OTFTs) are miniaturized devices based upon the electronic responses of organic semiconductors. In comparison to their conventional inorganic counterparts, organic semiconductors are cheaper, can undergo reversible doping processes and may have electronic properties chiefly modulated by molecular engineering approaches. More recently, OTFTs have been designed as gas sensor devices, displaying remarkable performance for the detection of important target analytes, such as ammonia, nitrogen dioxide, hydrogen sulfide and volatile organic compounds (VOCs). The present manuscript provides a comprehensive review on the working principle of OTFTs for gas sensing, with concise descriptions of devices’ architectures and parameter extraction based upon a constant charge carrier mobility model. Then, it moves on with methods of device fabrication and physicochemical descriptions of the main organic semiconductors recently applied to gas sensors (i.e., since 2015 but emphasizing even more recent results). Finally, it describes the achievements of OTFTs in the detection of important gas pollutants alongside an outlook toward the future of this exciting technology.

Off the beaten path: Novel mRNA-nanoformulations for therapeutic vaccination against HIV

Over the last few years, immunotherapy for HIV in general and therapeutic vaccination in particular, has received a tremendous boost, both in preclinical research and in clinical applications. This interest is based on the evidence that the immune system plays a crucial role in controlling HIV infection, as shown for long-term non-progressors and elite controllers, and that immune responses can be manipulated towards targeting conserved epitopes. So far, the most successful approach has been vaccination with autologous dendritic cells (DCs) loaded ex vivo with antigens and activation signals. Although this approach offers much promise, it also comes with significant drawbacks such as the requirement of a specialized infrastructure and expertise, as well as major challenges for logistics and storage, making it extremely time consuming and costly. Therefore, methods are being developed to avoid the use of ex vivo generated, autologous DCs. One of these methods is based on mRNA for therapeutic vaccination. mRNA has proven to be a very promising vaccine platform, as the coding information for any desired protein, including antigens and activation signals, can be generated in a very short period of time, showing promise both as an off-the-shelf therapy and as a personalized approach. However, an important drawback of this approach is the short half-life of native mRNA, due to the presence of ambient RNases. In addition, proper immunization requires that the antigens are expressed, processed and presented at the right immunological site (e.g. the lymphoid tissues). An ambivalent aspect of mRNA as a vaccine is its capacity to induce type I interferons, which can have beneficial adjuvant effects, but also deleterious effects on mRNA stability and translation. Thus, proper formulation of the mRNA is crucially important. Many approaches for RNA formulation have already been tested, with mixed success. In this review we discuss the state-of-the-art and future trends for mRNA-nanoparticle formulations for HIV vaccination, both in the prophylactic and in the therapeutic setting.

A closer physico-chemical look to the Layer-by-Layer electrostatic self-assembly of polyelectrolyte multilayers

The fabrication of polyelectrolyte multilayer films (PEMs) using the Layer-by-Layer (LbL) method is one of the most versatile approaches for manufacturing functional surfaces. This is the result of the possibility to control the assembly process of the LbL films almost at will, by changing the nature of the assembled materials (building blocks), the assembly conditions (pH, ionic strength, temperature, etc.) or even by changing some other operational parameters which may impact in the structure and physico-chemical properties of the obtained multi-layered films. Therefore, the understanding of the impact of the above mentioned parameters on the assembly process of LbL materials plays a critical role in the potential use of the LbL method for the fabrication of new functional materials with technological interest. This review tries to provide a broad physico-chemical perspective to the study of the fabrication process of PEMs by the LbL method, which allows one to take advantage of the many possibilities offered for this approach on the fabrication of new functional nanomaterials.

Layer-by-layer self-assembly polyelectrolytes loaded with cyclic adenosine monophosphate enhances the osteo/odontogenic differentiation of stem cells from apical papilla

Cyclic adenosine monophosphate (cAMP) is a second messenger involved in the dental regeneration. However, efficient long-lasting delivery of cAMP that is sufficient to mimic the in vivo microenvironment remains a major challenge. Here, cAMP was loaded in stem cells from apical papilla (SCAPs) using layer-by-layer self-assembly with gelatin and alginate polyelectrolytes (LBL-cAMP-SCAPs). LBL-cAMP-SCAPs expressed cAMP and increased the phosphorylation level of cAMP-response element-binding protein (CREB) which were evaluated by immunofluorescence and western blotting (WB). Enzyme-linked immunosorbent assay (ELISA) demonstrated that a sustained release of cAMP and vascular endothelial growth factor (VEGF) were present up to 14 days. Scanning electron microscopy (SEM) found LBL-coated SCAPs exhibited a spheroid-like morphology. CCK8 and live/dead staining showed that LBL treatment had no significant effect on cell proliferation and viability. LBL-cAMP-SCAPs enhanced mineralized nodule formation and up-regulated the mRNA levels of the osteogenesis-related genes, as well as related transcription factor-2 protein level which were revealed by Alizarin red staining, RT-PCR and WB, respectively. In conclusion, LBL self-assembly loaded with cAMP promoted the osteo/odontogenic differentiation of SCAPs, thereby providing a potential strategy for bioactive molecular delivery in dental regeneration.

Viral nanoparticles for drug delivery, imaging, immunotherapy, and theranostic applications

Viral nanoparticles (VNPs) encompass a diverse array of naturally occurring nanomaterials derived from plant viruses, bacteriophages, and mammalian viruses. The application and development of VNPs and their genome-free versions, the virus-like particles (VLPs), for nanomedicine is a rapidly growing. VLPs can encapsulate a wide range of active ingredients as well as be genetically or chemically conjugated to targeting ligands to achieve tissue specificity. VLPs are manufactured through scalable fermentation or molecular farming, and the materials are biocompatible and biodegradable. These properties have led to a wide range of applications, including cancer therapies, immunotherapies, vaccines, antimicrobial therapies, cardiovascular therapies, gene therapies, as well as imaging and theranostics. The use of VLPs as drug delivery agents is evolving, and sufficient research must continuously be undertaken to translate these therapies to the clinic. This review highlights some of the novel research efforts currently underway in the VNP drug delivery field in achieving this greater goal.

Development and characterization of layer-by-layer coated liposomes with poly(L-lysine) and poly(L-glutamic acid) to increase their resistance in biological media

Multilayered coated liposomes were prepared using the layer-by-layer (LbL) technique in an effort to improve their stability in biological media. The formulation strategy was based on the alternate deposition of two biocompatible and biodegradable polyelectrolytes - poly(L-lysine) (PLL) and poly(L-glutamic acid) (PGA) - on negatively charged small unilamellar vesicles (SUVs). Some parameters of the formulation process were optimized such as the polyelectrolyte concentration and the purification procedure. This optimized procedure has allowed the development of very homogeneous formulations of liposomes coated with up to 6 layers of polymers (so-called layersomes). The coating was characterized by dynamic light scattering (DLS), zeta potential measurements and Förster resonance energy transfer (FRET) between two fluorescently labeled polyelectrolytes. Studies on the stability of the formulations at 4 °C in a buffered solution have shown that most structures are stable over 1 month without impacting their encapsulation capacity. In addition, fluorophore release experiments have demonstrated a better resistance of the layersomes in the presence of a non-ionic detergent (Triton™ X-100) as well as in the presence of phospholipase A₂ and human plasma. In conclusion, new multilayered liposomes have been developed to increase the stability of conventional liposomes in biological environments.

Protein-based polyelectrolyte multilayers

The immobilization of proteins to impart specific functions to surfaces is topical for chemical engineering, healthcare and diagnosis. Layer-by-Layer (LbL) self-assembly is one of the most used method to immobilize macromolecules on surfaces. It consists in the alternate adsorption of oppositely charged species, resulting in the formation of a multilayer. This method in principle allows any charged object to be immobilized on any surface, from aqueous solutions. However, when it comes to proteins, the promises of versatility, simplicity and universality that the LbL approach holds are unmet due to the heterogeneity of protein properties. In this review, the literature is analyzed to make a generic approach emerge, with a view to facilitate the LbL assembly of proteins with polyelectrolytes (PEs). In particular, this review aims at guiding the choice of the PE and the building conditions that lead to the successful growth of protein-based multilayered self-assemblies.

Polyelectrolytic BSA nanoparticles containing silicon dihydroxide phthalocyanine as a promising candidate for drug delivery systems for anticancer photodynamic therapy

Recently several scientific-technological advances in the health area have developed. Among them, we can highlight research addressing nanoscience and nanotechnology focusing on the development of formulations for the cancer treatment. This work describes the synthesis and characterization of bovine serum albumin (BSA) polyelectrolytic nanoparticles for controlled release using silicon dihydroxide phthalocyanine [SiPc (OH)₂] as a photosensitizer model for application in Photodynamic Therapy (PDT). BSA nanoparticles were prepared by the one-step desolvation process and the nanoparticulate system was coated with polyelectrolytes using poly-(4-styrene sulfonate - PSS) as a strong polyanion and polyallylamine hydrochloride (PAH) as a weak polycation by the technique self-assembling layer-by-layer (LbL). The formulation was characterized and available in cellular culture. The profile of drug release was investigated and compared to that of free [SiPc (OH)₂]. The nanoparticles have a mean diameter of 226.9 nm, a narrow size distribution with polydispersive index of 0.153, smooth surface and spherical shape. [SiPc(OH)₂] loaded nanoparticles maintain its photophysical behaviour after encapsulation. The polyelectrolytic nanoparticles improved efficiency in release and photocytotoxicity assay when compared to pure drug. The results demonstrate that photosensitizer adsorption on BSA nanoparticles together with biopolymer layer-by-layer assembly provides a way to manufacture biocompatible nanostructured materials that are intended for use as biomaterials for Photodynamic Therapy applications.

Artificial small-diameter blood vessels: materials, fabrication, surface modification, mechanical properties, and bioactive functionalities

Cardiovascular diseases, especially ones involving narrowed or blocked blood vessels with diameters smaller than 6 millimeters, are the leading cause of death globally. Vascular grafts have been used in bypass surgery to replace damaged native blood vessels for treating severe cardio- and peripheral vascular diseases. However, autologous replacement grafts are not often available due to prior harvesting or the patient's health. Furthermore, autologous harvesting causes secondary injury to the patient at the harvest site. Therefore, artificial blood vessels have been widely investigated in the last several decades. In this review, the progress and potential outlook of small-diameter blood vessels (SDBVs) engineered in vitro are highlighted and summarized, including material selection and development, fabrication techniques, surface modification, mechanical properties, and bioactive functionalities. Several kinds of natural and synthetic polymers for artificial SDBVs are presented here. Commonly used fabrication techniques, such as extrusion and expansion, electrospinning, thermally induced phase separation (TIPS), braiding, 3D printing, hydrogel tubing, gas foaming, and a combination of these methods, are analyzed and compared. Different surface modification methods, such as physical immobilization, surface adsorption, plasma treatment, and chemical immobilization, are investigated and are compared here as well. Mechanical requirements of SDBVs are also reviewed for long-term service. In vitro biological functions of artificial blood vessels, including oxygen consumption, nitric oxide (NO) production, shear stress response, leukocyte adhesion, and anticoagulation, are also discussed. Finally, we draw conclusions regarding current challenges and attempts to identify future directions for the optimal combination of materials, fabrication methods, surface modifications, and biofunctionalities. We hope that this review can assist with the design, fabrication, and application of SDBVs engineered in vitro and promote future advancements in this emerging research field.

Micro-/Nanostructured Interface for Liquid Manipulation and Its Applications

Understanding the relationship between liquid manipulation and micro-/nanostructured interfaces has gained much attention due to the wide potential applications in many fields, such as chemical and biomedical assays, environmental protection, industry, and even daily life. Much work has been done to construct various materials with interfacial liquid manipulation abilities, leading to a range of interesting applications. Herein, different fabrication methods from the top-down approach to the bottom-up approach and subsequent surface modifications of micro-/nanostructured interfaces are first introduced. Then, interactions between the surface and liquid, including liquid wetting, liquid transportation, and a number of corresponding models, together with the definition of hydrophilic/hydrophobic, oleophilic/olephobic, the definition and mechanism of superwetting, including superhydrophobicity, superhydrophilicity, and superoleophobicity, are presented. The micro-/nanostructured interface, with major applications in self-cleaning, antifogging, anti-icing, anticorrosion, drag-reduction, oil-water separation, water collection, droplet (micro)array, and surface-directed liquid transport, is summarized, and the mechanisms underlying each application are discussed. Finally, the remaining challenges and future perspectives in this area are included.

Tryptophan Trimers and Tetramers Inhibit Dengue and Zika Virus Replication by Interfering with Viral Attachment Processes

Here, we report a class of tryptophan trimers and tetramers that inhibit (at low micromolar range) dengue and Zika virus infection in vitro These compounds (AL family) have three or four peripheral tryptophan moieties directly linked to a central scaffold through their amino groups; thus, their carboxylic acid groups are free and exposed to the periphery. Structure-activity relationship (SAR) studies demonstrated that the presence of extra phenyl rings with substituents other than COOH at the N1 or C2 position of the indole side chain is a requisite for the antiviral activity against both viruses. The molecules showed potent antiviral activity, with low cytotoxicity, when evaluated on different cell lines. Moreover, they were active against laboratory and clinical strains of all four serotypes of dengue virus as well as a selected group of Zika virus strains. Additional mechanistic studies performed with the two most potent compounds (AL439 and AL440) demonstrated an interaction with the viral envelope glycoprotein (domain III) of dengue 2 virus, preventing virus attachment to the host cell membrane. Since no antiviral agent is approved at the moment against these two flaviviruses, further pharmacokinetic studies with these molecules are needed for their development as future therapeutic/prophylactic drugs.

Self-Reorganizing Multilayer to Release Free Proteins from Self-Assemblies

The deconstruction of self-assemblies based on proteins and polyelectrolytes (PEs) and the subsequent release of intact proteins require either a switch from attractive to repulsive mode or particular PE properties (degradability, responsiveness, or differential affinity). Here, an interfacial self-assembly made of three charged species, i.e., a strong polyacid complexed with a protein and a weak polybase, is shown to self-reorganize upon a shift in pH. When the pH takes a value that is one pH unit lower than the pK_a of the weak polybase, the two PEs associate, thereby releasing the protein. The disassembly thus relies on associative forces rather than on the alteration of the protein-PE coupling strength. Hence, it allows the release of a protein using two simple PEs. The method is illustrated for lysozyme, which recovered up to half of its initial bioactivity after release. In contrast, a control self-assembled film that could not reorganize maintained only about 21% of the protein bioactivity after disassembly. This versatile approach is valuable for drug delivery devices and biomaterials as it allows the release of large numbers of active protein molecules.

Combining Top-Down and Bottom-Up with Photodegradable Layer-by-Layer Films

Layer-by-layer (LbL) self-assembly of polymer coatings is a bottom-up fabrication technique with broad applicability across a wide range of materials and applications that require control over interfacial properties. While most LbL coatings are chemically uniform in directions both tangent and perpendicular to their substrate, control over the properties of surface coatings as a function of space can enhance their function. To contribute to this rapidly advancing field, our group has focused on the top-down spatiotemporal control possible with photochemically reactive LbL coatings, harnessed through charge-shifting polyelectrolytes enabled by photocleavable ester pendants. The photolysis of the photocleavable esters degrades LbL films containing these polyelectrolytes. The chemical structures of the photocleavable groups dictate the wavelengths responsible for disrupting these coatings, ranging from ultraviolet to near-infrared in our work. In addition, spatially segregating reactive groups into "compartments" within LbL films has enabled us to fabricate reactive free-standing polymer films and multiheight photopatterned coatings. Overall, by combining bottom-up and top-down approaches, photoreactive LbL films enable precise control over the interfacial properties of polymer and composite coatings.

Surface Micro- and Nanoengineering: Applications of Layer-by-Layer Technology as a Versatile Tool to Control Cellular Behavior

Extracellular matrix (ECM) cues have been widely investigated for their impact on cellular behavior. Among mechanics, physics, chemistry, and topography, different ECM properties have been discovered as important parameters to modulate cell functions, activating mechanotransduction pathways that can influence gene expression, proliferation or even differentiation. Particularly, ECM topography has been gaining more and more interest based on the evidence that these physical cues can tailor cell behavior. Here, an overview of bottom-up and top-down approaches reported to produce materials capable of mimicking the ECM topography and being applied for biomedical purposes is provided. Moreover, the increasing motivation of using the layer-by-layer (LbL) technique to reproduce these topographical cues is highlighted. LbL assembly is a versatile methodology used to coat materials with a nanoscale fidelity to the geometry of the template or to produce multilayer thin films composed of polymers, proteins, colloids, or even cells. Different geometries, sizes, or shapes on surface topography can imply different behaviors: effects on the cell adhesion, proliferation, morphology, alignment, migration, gene expression, and even differentiation are considered. Finally, the importance of LbL assembly to produce defined topographical cues on materials is discussed, highlighting the potential of micro- and nanoengineered materials to modulate cell function and fate.

Multilayer nanoscale functionalization to treat disorders and enhance regeneration of bone tissue

The coatings application onto medical devices has experienced a continuous growth in the last few years. Medical device coating market is expected to grow at a CAGR of 5.16% to reach USD 10 million by 2023 due to the increasing geriatric population and the growing demand for continuous innovation. Layer-by-Layer (LbL) assembly represents a versatile method to modify the surface properties, in order to control cell interaction and thus enhance biological functions. Furthermore, LbL is environmentally friendly, able to coat all types of surfaces with the creation of homogenous film and to include and control the release of biomolecules/drugs. This feature review provides a critical overview on recent progresses in functionalizing materials by LbL assembly for bone regeneration and disorder treatment. An overview of emerging and visionary opportunities on LbL technologies and further combination with other existing methods used in biomedical field, is also discussed to evidence the new challenges and potential developments in bone regenerative medicine.

Construction of multilayer films with bactericidal and long-term antitumor drug release properties as a non-vascular stent coating for therapy in obstruction

An antibacterial and antitumor coating for non-vascular stent was constructed via the layer-by-layer electrostatic self-assembly method.

Novel cationic tannin/glycosaminoglycan-based polyelectrolyte multilayers promote stem cells adhesion and proliferation

Condensed tannin is a biologically derived polycation that can be combined with glycosaminoglycans (chondroitin sulfate and heparin) to prepare polyelectrolyte multilayers that promote stem cell adhesion and proliferation.

Capsule-Integrated Polypeptide Multilayer Films for Effective pH-Responsive Multiple Drug Co-Delivery

Many applications using drug-carrying biomedical materials require on-demand, localized delivery of multiple therapeutic agents in precisely controlled and patient-specific time sequences, especially after assembly of the delivery vehicles; however, creating such materials has proven extremely challenging. Here, we report a novel strategy to create polypeptide multilayer films integrated with capsules as vehicles for co-delivery of multiple drugs using layer-by-layer self-assembly technology. Our approach allows the multilayered polypeptide nanofilms and preimpregnated capsules to assemble into innovative biomedical materials with high and controllable loading of multiple drugs at any time postpreparation and to achieve pH-responsive and sustained release. The resulting capsule-integrated polypeptide multilayer films effectively co-deliver various drugs with very different properties, including proteins (e.g., growth factors) and nanoparticles, achieving bovine serum albumin loading of 80 μg cm-2 and release of 2 weeks, and histone loading of 100 μg cm-2 and release of 6 weeks; which also enable Staphylococcus aureus killing efficacy of 83% while maintaining osteoblast viability of >85% with silver nanoparticle delivery; and >5-fold cell adhesion and proliferation capability with live cell percentage of >90% via human recombinant bone morphogenetic protein 2 delivery. The successful development of such fascinating materials can not only function as advanced nanocoatings to reduce two major complications of orthopedic bone injuries (i.e., infection and delayed bone regeneration) but also provide new insights into the design and development of multifunctional materials for various other biomedical applications.