Photoelectrochemical detection of metal ions

Molecularly imprinted Photoelectrochemical sensor for Escherichia coli based on Cu:ZIF-8/KZ3TTz heterojunction

Herein, a signal stable molecularly imprinted photoelectrochemical (MIP-PEC) sensing platform was designed to sensitively detect Escherichia coli by incorporating polythiophene film with Cu: ZIF-8/KZ3TTz heterojunction. Attributed to the formation of a staggered type II heterostructure between KZ3TTz and Cu: ZIF-8 semiconductors, the Cu: ZIF-8/KZ3TTz heterojunction exhibited stable and significant cathode PEC response. Impressively, selective MIP film was grown on the surface of Cu: ZIF-8/KZ3TTz/GCE by electro-polymerization of 2,2-Dimethyl-5-(3-thienyl)-1,3-dioxane-4,6-dione (DTDD) in the presence of E. coli. After removing E. coli, more electrons were transferred to the electrolyte solution through the imprinting cavity on the MIP film, which was eliminated by O2 in the electrolyte, causing further enhancement of the cathode PEC response. On the contrary, when the imprinted cavity was filled with E. coli, the cathodic PEC response gradually decreased due to steric hindrance effect. The sensor showed excellent linearity in the range of 101 to 108 CFU/mL with a detection limit of 4.09 CFU/mL (S/N = 3). This strategy offered a novel approach for pathogenic bacteria detection in food safety and environmental monitoring.

Recent advances in photoelectrochemical platforms based on porous materials for environmental pollutant detection

Human health and ecology are seriously threatened by harmful environmental contaminants. It is essential to develop efficient and simple methods for their detection. Environmental pollutants can be detected using photoelectrochemical (PEC) detection technologies. The key ingredient in the PEC sensing system is the photoactive material. Due to the unique characteristics, such as a large surface area, enhanced exposure of active sites, and effective mass capture and diffusion, porous materials have been regarded as ideal sensing materials for the construction of PEC sensors. Extensive efforts have been devoted to the development and modification of PEC sensors based on porous materials. However, a review of the relationship between detection performance and the structure of porous materials is still lacking. In this work, we present an overview of PEC sensors based on porous materials. A number of typical porous materials are introduced separately, and their applications in PEC detection of different types of environmental pollutants are also discussed. More importantly, special attention has been paid to how the porous material's structure affects aspects like sensitivity, selectivity, and detection limits of the associated PEC sensor. In addition, future research perspectives in the area of PEC sensors based on porous materials are presented.

A responsive organic probe based photoelectrochemical sensor for hydrazine detection

This study developed a new photoelectrochemical (PEC) sensor for the detection of the hydrazine (N2H4, HZ) based on a donor-π-bridge-acceptor (D-π-A) configuration organic photoactive dye (Dye-HZ). The dye was covalently immobilized on an FTO/TiO2 (FTO: fluorine-doped tin oxide) substrate, resulting in a photoanode FTO/TiO2/Dye-HZ that exhibits a specific PEC response to N2H4. Hydrazine reacts with the acetyl group in the Dye-HZ molecule, leading to its removal and the formation of a hydroxy group. The hydroxy group dissociates a hydrogen ion, forming a phenoxide anion with strong electron-donating characteristics. As a result, the dye molecule exhibits a strong intramolecular charge transfer effect, significantly enhancing absorbance and photoelectric response under visible light irradiation, leading to a remarkable increase in photocurrent and enabling highly sensitive detection of hydrazine. Furthermore, the PEC sensor demonstrates excellent selectivity and can be applied for the detection of hydrazine in real water samples. This study presents an innovative PEC sensing approach for hydrazine based on responsive photoactive molecules, providing new insights for PEC detection of other environmental pollutants.

Fabrication of 1,8-naphthalimide modified cellulose derivative composite fluorescent hydrogel probes and their application in the detection of Cr(VI)

The design and development of a rapid and quantitative method for the detection of heavy metal ions is of great importance for environmental protection. We have prepared a 1,8-Naphthalimide modified cellulose composite fluorescent hydrogel (CENAEA/PAA) with a stereo double network structure. Characterized by excellent hydrogel functional structure and fluorescence detection performance, it can efficiently and selectively identify and detect Cr(VI) with linear quenching in the range of 0-400 μmol/L and detection limit of 0.58 μmol/L for Cr(VI). The results show that the CENAEA/PAA can effectively adsorb Cr(VI) with a maximum adsorption capacity of 189.04 mg/g. Finally, the morphological characteristics, chemical structure, fluorescence properties and adsorption behavior of CENAEA/PAA were analyzed and fitted well with the pseudo-second-order model and Freundlich model. Thus, the present work provides a green and sustainable approach for the synthesis of a functional material that can be used for the detection and adsorption of heavy metal ions.

Fabrication of near infrared light responsive photoelectrochemical immunosensor for in vivo detection of melanoma cells

Effective and convenient detection of melanoma cells with high sensitivity is essential to identify malignant melanoma in its early stage. However, the existing detection methods, such as immunohistochemical analysis, are too complicated and time-consuming to realize the convenient in vivo and in situ detection. Herein, a near infrared responsive photoelectrochemical (PEC) immunosensor is proposed with plasmonic Au nanoparticles-photonic TiO2 nanocaves (Au/TiO2 NCs) as photon harvest and conversion transducer and antibody as cell recognition unit. The micro-antibody/Au/TiO2 NCs photoelectrode can easily in vivo distinguish melanoma cells and can realize sensitive detection of melanoma cells in short time of 1 min with a lowest limit of detection of 2 cell mL-1. The PEC immunosensor strategy not only allows us to pioneeringly implement sensitive in vivo bio-detection, but also opens up a new avenue for rational design of cell recognition units and micro-electrode for universal and reliable bio-detections.

A multifunctional electrochemiluminescence and photoelectrochemical biosensor based on a quantum dot ion-exchange reaction for two-channel detection of thrombin

Herein, a multifunctional electrochemiluminescence (ECL) and photoelectrochemical (PEC) biosensor based on exchange of Ag+ with CdTe QDs was developed for dual-mode detection of thrombin. First, CdTe QDs assembled on an electrode displayed superior ECL and PEC signals. At the same time, C-rich hairpin (HP) DNA linked to silicon spheres loaded a large amount of Ag+, and the specific binding of thrombin to an aptamer led to the release of DNA P; then, DNA P interacted with HP DNA to produce numerous Ag+ ions by an enzyme-digestion amplification reaction. Ag+ underwent ion exchange with CdTe QDs to generate AgTe/CdTe QDs, resulting in much reversed PEC and changed ECL signals for dual-mode detection of thrombin. This work takes advantage of outstanding multi-signals of QDs coupled with convenient ion exchange to achieve multi-mode detection of the target, avoiding false positive or false negative signals generated in the traditional detection process, and thus can be used for the rapid detection of various biomolecules in actual samples.

Unbiased and Signal-Weakening Photoelectrochemical Hexavalent Chromium Sensing via a CuO Film Photocathode

Photoelectrochemical (PEC) sensors show great potential for the detection of heavy metal ions because of their low background noise, high sensitivity, and ease of integration. However, the detection limit is relatively high for hexavalent chromium (Cr(VI)) monitoring in addition to the requirement of an external bias. Herein, a CuO film is readily synthesized as the photoactive material via reactive sputtering and thermal annealing in the construction of a PEC sensing photocathode for Cr(VI) monitoring. A different mechanism (i.e., Signal-Weakening PEC sensing) is confirmed by examining the electrochemical impedance and photocurrent response of different CuO film photoelectrodes prepared with the same conditions in contact with various solutions containing concentration-varying Cr(VI) for different durations. The detection of Cr(VI) is successfully achieved with the Signal-Weakening PEC response; a drop of photocathode signal with an increasing Cr(VI) concentration from the steric hindrance effect of the in situ formed Cr(OH)₃ precipitates. The photocurrent of the optimized CuO film photocathode linearly declines as the concentration of Cr(VI) increases from 0.08 to 20 µM, with a detection limit down to 2.8 nM (Signal/Noise = 3) and a fitted sensitivity of 4.22 µA·μM^-1. Moreover, this proposed sensing route shows operation simplicity, satisfactory selectivity, and reproducibility.

Green multifunctional PVA composite hydrogel-membrane for the efficient purification of emulsified oil wastewater containing Pb2+ ions

To date, most existing engineering materials have difficulty simultaneously separating oil/water and removing heavy metals from complex oily wastewater. In response to this challenge, a novel multifunctional composite hydrogel membrane (named PVA-CS-LDHs) was fabricated by incorporating chitosan (CS) and nanohydrotalcite (LDHs) into a polyvinyl alcohol (PVA) hydrogel. This material was developed using an easy yet versatile strategy of freezing and salting-out, which can enable the formation of a PVA-CS-LDH hydrogel membrane in one step and endow the PVA-CS-LDHs with high strength, excellent stretchability, favourable shape recoverability, and an ideal 3D microstructure. The PVA-CS-LDH membrane can purify emulsified oil and metal ions simultaneously with a separation efficiency of 99.89 % for emulsified oil and a removal efficiency of 97.44 % for Pb2+ ions. Additionally, the high-efficiency, multifunctional, high-antifouling and eco-friendly properties of the PVA-CS-LDH membrane make it a promising hydrogel material for both emulsified oil separation and heavy metal ion removal. Thus, this material provides critical application potential that can address scientific and technological challenges in complex oily wastewater purification.

A sandwiched photoelectrochemical biosensing platform for detecting Cytokeratin-19 fragments based on Ag2S-sensitized BiOI/Bi2S3 heterostructure amplified by sulfur and nitrogen co-doped carbon quantum dots

A sandwiched photoelectrochemical (PEC) immunosensor based on BiOI/Bi₂S₃/Ag₂S was designed for the quantitative detection of cytokeratin-19 fragments (CYFRA21-1) in serum. In this work, due to the intervention of the narrow band gap Bi₂S₃, the absorption of the light source by the BiOI/Bi₂S₃ heterostructure has been significantly enhanced. Meanwhile, the matched band structure of BiOI, Bi₂S₃ and Ag₂S promoted the rapid transfer of electrons between the conduction bands and effectively inhibited the recombination of electron-hole pairs, thus enhanced the photoelectric signals. Sulfur and nitrogen co-doped carbon quantum dots (S,N-CQDs) with up-conversion luminescence properties provided more light energy for the base materials. On the other hand, S,N-CQDs were combined with Ab₂ through polydopamine (PDA), as secondary antibody labels, further enhanced the sensitivity of the sensor. Herein, the linear range of the sensor was from 0.001 to 100 ng mL^-1 and the detection limit was 1.72 pg mL^-1. In addition, the sensor provides a feasible way for the detection of tumor markers due to its excellent selectivity, repeatability and good stability.

A novel AIE-active camphor-based fluorescent probe for simultaneous detection of Al3+ and Zn2+ at dual channels in living cells and zebrafish

A novel dual-functional probe N'-(2-hydroxy-5-((4,7,7-trimethyl-3-oxobicyclo[2.2.1] heptan-2-ylidene)methyl) benzylidene)picolinohydrazide (PSH) was constructed from natural camphor. This probe showed strong yellow-green fluorescence at 535 nm due to its aggregation-induced emission (AIE) feature. Interestingly, the probe PSH displayed a significant turn-on fluorescence response towards Al³⁺ (green fluorescence at 500 nm) and Zn²⁺ (orange fluorescence at 555 nm) at two different emissive channels. The detection limits of PSH towards Al³⁺ and Zn²⁺ were found to be 12.1 nM and 14.2 nM, respectively. PSH exhibited excellent selectivity and anti-interference performance and could distinguish between Al³⁺/Zn²⁺ and identify whether Zn²⁺ exists in the PSH-Al³⁺ complex by adding ATP. The binding mechanisms between PSH and Al³⁺/Zn²⁺ ions were supported by ¹H NMR, HRMS analysis, and density functional theory (DFT) calculations. Based on its outstanding sensing properties, the probe PSH was used to establish molecular logic function gates. Moreover, the probe PSH could be applied to detect Al³⁺ and Zn²⁺ in real environmental water, and fluorescence detection was well demonstrated by test strips. Furthermore, the probe PSH was employed for imaging Al³⁺ and Zn²⁺ in HeLa cells and zebrafish.

Nanostructured Shell-Layer Artificial Antibody with Fluorescence-Tagged Recognition Sites for the Trace Detection of Heavy Metal Ions by Self-Reporting Microsensor Arrays

Herein, a strategy for a metal ion-imprinted artificial antibody with recognition sites tagged by fluorescein was carried out to construct the selective sites with a sensitive optical response signal to the specific metal ion. The synthesized silica nanoparticles were modified by the derivative residue group of 3-aminopropyltriethoxysilane conjugated with a 4-chloro-7-nitro-1,2,3-benzoxadiazole (NBD-Cl) molecule through the hydrolysis and condensation reactions. The as-prepared silica nanoparticles were encapsulated by metal ion (Cu²⁺, Cd²⁺, Hg²⁺, and Pb²⁺)-imprinted polymers with nanostructured layers through the copolymerization of ethyl glycol dimethyl methacrylate (EGDMA) as a cross-linker, AIBN as an initiator, metal ions as template molecules, AA as a functional monomer, and acetonitrile as a solvent. The layers of molecular imprinted polymers (MIPs) with a core-shell structure removed template molecules by EDTA-2Na to retain the cavities and spatial sizes to match the imprinted metal ions. The microsensor arrays were achieved by the self-assembly technique of SiO₂@MIP nanoparticles on the etched silicon wafer with regular dot arrays. The nanostructured-shell layers with fluorescence-tagged recognition sites rebound metal ions by the driving force of concentration difference demonstrates the high selective recognition and sensitive detection to heavy metal ions through the decline of fluorescence intensity. The LOD concentration for four metal ions is down to 10^-9 mol·L^-1. The method will provide biomimetic synthesis, analyte screen, and detection of highly dangerous materials in the environment for theoretical foundation and technological support.

Molecularly imprinted photoelectrochemical sensor for detecting tetrabromobisphenol A in indoor dust and water

The gradual emissions of tetrabromobisphenol A (TBBPA) from the primitive recycling of E-waste create human health threats, which urgently require to develop an efficient, rapid yet simple detection method. The present study conducts a highly sensitive molecularly imprinted photoelectrochemical sensor (MIPES) containing molecularly imprinted (MI)-TiO₂, Au, and reduced graphene oxide for the trace detection of TBBPA in indoor dust and surface water from an E-waste recycling area. The photocurrent response is used to evaluate the sensing performance of the MIPES toward TBBPA detection. The working potential for amperometry is 0.48 V. The wavelength range for photoelectrochemical detection is 320-780 nm. The sensor shows a detection range of 1.68 to 100 nM with a low limit of detection of 0.51 nM (LOD = 3 s_b/S) and a limit of quantification of 1.68 nM (LOQ = 3.3 LOD). In addition, the MIPES sensor exhibits rapid, excellent reproducibility, selectivity, and long-term stability toward TBBPA detection. The relative standard deviation of three measurements for real samples is less than 7.0%, and the recovery range is 90.0-115%. The surface of molecular imprinting contributes to the high charge separation and sensing photocurrent response of TBBPA, which is confirmed by single-particle photoluminescence spectroscopy. The present study provides a new facile sensor with highly sensitive yet rapid response to detect environmental pollutants in E-waste by using the MIPES.

Bicolour fluorescent molecular sensors for cations: design and experimental validation

Molecular entities whose fluorescence spectra are different when they bind metal cations are termed bicolour fluorescent molecular sensors. The basic design criteria of this kind of compound are presented and the different fluorescent responses are discussed in terms of their chemical behaviour and electronic features. These latter elements include intramolecular charge transfer (ICT), formation of intramolecular and intermolecular excimer/exciplex complexes and Förster resonance energy transfer (FRET). Changes in the electronic properties of the fluorophore based on the decoupling between its constitutive units upon metal binding are also discussed. The possibility of generating fluorescent bicolour indicators that can capture metal cations in the gas phase and at solid-gas interfaces is also discussed.

Enzymatic photoelectrochemical bioassay based on hierarchical CdS/NiO heterojunction for glucose determination

The design and development of a 3D hierarchical CdS/NiO heterojunction and its application in a self-powered cathodic photoelectrochemical (PEC) bioanalysis is introduced. Specifically, NiO nanoflakes (NFs) were in situ formed on carbon fibers via a facile liquid-phase deposition method followed by an annealing step and subsequent integration with CdS quantum dots (QDs). The glucose oxidase (GOx) was then coated on the photocathode to allow the determination of glucose. Under 5 W 410 nm LED light and at a working voltage of 0.0 V (vs. Ag/AgCl), this method can assay glucose concentrations down to 1.77×10^-9 M. The linear range was 5×10^-7 M to 1×10^-3 M, and the relative standard deviation (RSD) was below 5%. The photocathodic biosensor achieved target detection with high sensitivity and selectivity. This work is expected to stimulate more passion in the development of innovative hierarchical heterostructures for advanced self-powered photocathodic bioanalysis. Design of 3D hierarchical CdS/NiO heterojunction and its application in a self-powered cathodic photoelectrochemical (PEC) bioanalysis.

ZnCuInSe/Au/TiO2 sandwich nanowires-based photoelectrochemical biosensor for ultrasensitive detection of kanamycin

A highly selective and sensitive photoelectrochemical (PEC) sensing platform was developed for kanamycin assay based on the aptamer modified sandwich-structured ZnCuInSe/Au/TiO₂ nanowires. Sandwiched between the TiO₂ nanowires and the ZnCuInSe quantum dot (QDs) layer, the Au nanoparticles (Au NPs) serves as a plasmonic photosensitizer and an electron relay, which expand the light absorption range and facilitates the charge transfer. Also, ZnCuInSe QDs, a broad spectrum photosensitizer can capture visible light, which enhance the photocurrent density response. Through the Au-S bond and Cu-S bond, the HS-aptamer were immobilized on the ZnCuInSe/Au/TiO₂ nanowires as a recognition unit for kanamycin. The proposed sensing platform showed excellent assay performance for kanamycin with a linear response range from 0.2 to 250 nM, and high selectivity. By changing the recognizers, the proposed sensing platform could be easily extended to detect other biomolecules, and may have a promising application in bioanalysis.

Detection of pollutants in water bodies: electrochemical detection or photo-electrochemical detection?

The massive discharge of pollutants including endocrine-disrupting chemicals (EDCs), heavy metals, pharmaceuticals and personal care products (PPCPs) into water bodies is endangering the ecological environment and human health, and needs to be accurately detected. Both electrochemical and photo-electrochemical detection methods have been widely used for the detection of these pollutants, however, which one is better for the detection of different environmental pollutants? In this feature article, different electrochemical and photo-electrochemical detection methods are summarized, including the principles, classification, common catalysts, and applications. By summarizing the advantages and disadvantages of different detection methods, this review provides a guide for other researchers to detect pollutants in water bodies by using electrochemical and photo-electrochemical analysis.

ZnO-reduced graphene oxide composite based photoelectrochemical aptasensor for sensitive Cd(II) detection with methylene blue as sensitizer

In this paper a photoelectrochemical (PEC) aptasensor based on specific recognition with conformational changed after the target Cd(II) identification was fabricated. A ZnO and reduced graphene oxide (ZnO-rGO) nanocomposite with enhanced PEC activity was designed as photoactive material. After the further incorporation of gold nanoparticles (AuNPs) with ZnO-rGO nanocomposite, the enhanced photocurrent signal could be detected owing to the localized surface plasmon resonance and good conductivity of AuNPs. In addition, AuNPs were used as anchors for immobilization of -SH modified aptamer S1. After that aptamer S2 was paired with S1 sequence to form complementary double stranded DNA (dsDNA) on the electrode surface. Methylene blue (MB) was acted as sensitizer and assembled in dsDNA structure to amplify photocurrent response. When Cd(II) was bound to the aptamer presented on the sensing interface, S2 specifically recognized and captured Cd(II), which resulted in the unwinding of dsDNA structure and the separation of MB molecules from the electrode surface with photocurrent response decreased. The photocurrent was detected by a double-working-electrode system, which used the modified electrode as the first working electrode and glassy carbon electrode (GCE) as the second working electrode. Dopamine (DA) was added to the electrolyte and acted as the electron donor, which could be oxidized on the modified electrode and reduced on the GCE to form a cyclic reaction, leading to the enhanced photocurrent response with improved photocurrent stability. This MB sensitized PEC aptasensor exhibited a high sensitivity with a detection limit of 1.8 × 10^-12 mol/L (3σ). Thus, a highly sensitive aptasensor with double-working-electrode detection method for Cd(II) determination were established and further applied to the water samples analysis.

Cu(ii) vitamin C tunes photocatalytic activity of TiO2 nanoparticles for visible light-driven aerobic oxidation of benzylic alcohols

The incorporation of Cu(OAc)₂ into ascorbic acid coated TiO₂ nanoparticles easily provided a new heterogeneous visible-light active titania-based photocatalyst (TiO₂-AA-Cu(ii)) which was characterized by different techniques such as FT-IR, XPS, ICP-AES, TGA and TEM. A red-shift of the band-edge and a reduction of the band-gap (2.8 eV vs. 3.08 for TiO₂) were demonstrated by UV-DRS and Tauc plots. The combination of the as-prepared TiO₂-AA-Cu(ii) nanoparticles with TEMPO and molecular oxygen (air) afforded an active catalytic system for the selective oxidation of diverse set of benzylic alcohols under solvent-free conditions. A photoassisted pathway was confirmed for oxidation reactions evidenced by good correlation between apparent quantum yield (AQY) and diffuse reflectance spectra (DRS) of the as-prepared nanohybrid. The spectral data and recycling experiments demonstrated the structural stability of the title copper photocatalyst during oxidation reactions.

Light-Addressable Electrodes for Dynamic and Flexible Addressing of Biological Systems and Electrochemical Reactions

In this review article, we are going to present an overview on possible applications of light-addressable electrodes (LAE) as actuator/manipulation devices besides classical electrode structures. For LAEs, the electrode material consists of a semiconductor. Illumination with a light source with the appropiate wavelength leads to the generation of electron-hole pairs which can be utilized for further photoelectrochemical reaction. Due to recent progress in light-projection technologies, highly dynamic and flexible illumination patterns can be generated, opening new possibilities for light-addressable electrodes. A short introduction on semiconductor–electrolyte interfaces with light stimulation is given together with electrode-design approaches. Towards applications, the stimulation of cells with different electrode materials and fabrication designs is explained, followed by analyte-manipulation strategies and spatially resolved photoelectrochemical deposition of different material types.

Recent progress of heterostructure-based photoelectrodes in photoelectrochemical biosensing: a mini review

The heterostructure photoelectrodes have witted the rapid development to improve the performance of PEC biosensors recently.

Photoelectrochemical Determination of Cu2+ Using a WO3/CdS Heterojunction Photoanode

Copper ions are not only physiologically essential for life but also hazardous materials causing a series of neurodegenerative diseases. Photoelectrochemical (PEC) detection has attracted a large amount of focus as a potential strategy to develop Cu²⁺ ion sensors. However, relatively low photocurrent signals with poor antidisturbance ability and the limited concentration range have prevented its practical applications. Here, we designed a WO₃/CdS heterojunction photoanode for the PEC determination of Cu²⁺ in aqueous solution through a simple two-step chemical bath deposition method. The obtained WO₃/CdS photoanode had a nanoplate morphology and showed an enhanced photoresponsivity with a photocurrent density of 1.5 mA/cm² at 1.23 V versus RHE under illumination. Naturally, it exhibited a low detection limit (0.06 μM) and wider range (0.5 μM to 1 mM) for Cu²⁺ PEC detection first, suggesting that the WO₃/CdS heterojunction photoanode is a promising tool to monitor copper pollution in natural environments.

A Cu2+-doped two-dimensional material-based heterojunction photoelectrode: application for highly sensitive photoelectrochemical detection of hydrogen sulfide

In this work, on the basis of a Cu2+-doped two-dimensional material-based heterojunction photoelectrode, a novel anodic photoelectrochemical (PEC) sensing platform was constructed for highly sensitive detection of endogenous H2S. Briefly, with g-C3N4 and TiO2 as representative materials, the sensor was fabricated by modifying g-C3N4/TiO2 nanorod arrays (NAs) onto the surface of fluorine-doped tin oxide (FTO) and then doping Cu2+ as a Cu x S (x = 1, 2) precursor. After the binding of S2- with surface-attached Cu2+, the signal was quenched owing to the in situ generation of Cu x S which offers trapping sites to hinder generation of photocurrent signals. Since the photocurrent inhibition was intimately associated with the concentration of S2-, a highly sensitive PEC biosensor was fabricated for H2S detection. More importantly, the proposed sensing platform showed the enormous potential of g-C3N4/TiO2 NAs for further development of PEC bioanalysis, which may serve as a common basis for other semiconductor applications and stimulates the exploration of numerous high-performance nanocomposites.

Bismuth Oxyiodide Couples with Glucose Oxidase: A Special Synergized Dual-Catalysis Mechanism for Photoelectrochemical Enzymatic Bioanalysis

On the basis of a special synergized dual-catalysis mechanism, this work reports the preparation of a BiOI-based heterojunction and its use for cathodic photoelectrochemical (PEC) oxidase biosensing, which, unexpectedly, revealed that hydrogen peroxide (H₂O₂) had a greater impact than dioxygen (O₂). Specifically, the BiOI layer was in situ formed on the substrate through an impregnating hydroxylation method for the following coupling with the model enzyme of glucose oxidases (GOx). The constructed cathodic PEC enzyme sensor exhibited a good analytical performance of rapid response, high stability, and good selectivity. Especially, glucose-induced H₂O₂-controlled enhancement of the photocurrent was recorded rather than the commonly observed O₂-dependent suppression of the signal. This interesting phenomenon was attributed to a special synergized dual-catalysis mechanism. Briefly, this study is expected to provide a new BiOI-based photocathode for general PEC bioanalysis development and to inspire more interest in the design and construction of a novel heterojunction for advanced photocathodic bioanalysis. More importantly, the mechanism revealed here would offer a totally different perspective for the use of a biomimetic catalyst in the design of future PEC enzymatic sensing and the understanding of relevant signaling routes as well as the implementation of innovative PEC devices.

Label-free photoelectrochemical aptasensor for tetracycline detection based on cerium doped CdS sensitized BiYWO6

A novel photoelectrochemical (PEC) aptasensor based on cerium (Ce) doped CdS modified graphene (G)/BiYWO₆ was designed, which exhibits enhanced PEC intensity compared with pure BiYWO₆, G/BiYWO₃ and BiYWO₆/Ce:CdS. In this scenario, ascorbic acid (AA) was exploited as an efficient and non-poisonous electron donor for scavenging photogenerated holes. The doping of Ce in CdS promoted its visible light absorption range and facilitated the charge transfer rate as well as hindered the h⁺/e^- recombination. Moreover, the combination of G further promoted the electron carrier separation and transfer process due to its excellent electron collection and shuttling characteristic. Thus, the G/BiYWO₆/Ce:CdS heterostructure was successfully served as a matrix for the PEC detection of tetracycline (Tc) at 0 V (vs Hg/Hg₂Cl₂). Under optimal conditions, the PEC aptasensor could offer a sensitive and specific detection limit (3 S/N) of Tc down to 0.01 ng/mL, as well as acceptable reproducibility, selectivity and storage stability, which opened up a promising pathway for the development of PEC biosensors.

A smartphone-based double-channel fluorescence setup for immunoassay of a carcinoembryonic antigen using CuS nanoparticles for signal amplification

Sensitive detection of cancer biomarkers is valuable for clinical diagnosis and treatment assessment of cancers.

A ratiometric photoelectrochemical immunosensor based on g-C3N4@TiO2 NTs amplified by signal antibodies–Co3O4 nanoparticle conjugates

Herein, we report a ratiometric photoelectrochemical (PEC) immunosensor coupled with secondary antibodies–Co₃O₄ nanoparticle conjugates (Ab₂–Co₃O₄ NPs) for signal amplification.