Fiber enhanced Raman spectroscopic analysis as a novel method for diagnosis and monitoring of diseases related to hyperbilirubinemia and hyperbiliverdinemia

Comprehensive multi-gas study by means of fiber-enhanced Raman spectroscopy for the investigation of nitrogen cycle processes

The extensive use of synthetic fertilizers has led to a considerable increase in reactive nitrogen input into agricultural and natural systems, resulting in negative effects in multiple ecosystems, the so-called nitrogen cascade. Since the global population relies on fertilization for food production, synthetic fertilizer use needs to be optimized by balancing crop yield and reactive nitrogen losses. Fiber-enhanced Raman spectroscopy (FERS) is introduced as a unique method for the simultaneous quantification of multiple gases to the study processes related to the nitrogen cycle. By monitoring changes in the headspace gas concentrations, processes such as denitrification, nitrification, respiration, and nitrogen fixation, as well as fertilizer addition were studied. The differences in concentration between the ambient and prepared process samples were evident in the Raman spectra, allowing for differentiation of process-specific spectra. Gas mixture concentrations were quantified within a range of low ppm to 100% for the gases N2, O2, CO2, N2O, and NH3. Compositional changes were attributed to processes of the nitrogen cycle. With help of multivariate curve resolution, it was possible to quantify N2O and CO2 simultaneously. The impact of fertilizers on N-cycle processes in soil was simulated and analyzed for identifying active processes. Thus, FERS was proven to be a suitable technique to optimize fertilizer composition and to quantify N2O and NH3 emissions, all with a single device and without further sample preparation.

Antiresonant fiber-enhanced Raman spectroscopy gas sensing with 1 ppm sensitivity

Antiresonant hollow-core fiber (AR-HCF) exhibits unprecedented optical performance in low transmission attenuation, broad transmission bandwidth, and single spatial mode quality. However, due to its lower numerical aperture, when utilizing the Fiber-Enhanced Raman Spectroscopy (FERS) principle for gas detection, the efficiency of AR-HCF in collecting Raman signals per unit length is significantly lower than that of hollow-core photonic crystal fiber. Nonetheless, AR-HCF effectively suppresses higher-order modes and offers bandwidth in hundreds of nanometers. By increasing the length of AR-HCF, its advantages can be effectively harnessed, leading to a considerable enhancement in the system's ability for low-concentration gas detection. We combine the nodeless antiresonant hollow-core fiber and Raman spectroscopy for enhanced Raman gas sensing in a forward scattering measurement configuration to investigate the attenuation behavior of the silica background signals. The silica background attenuation behavior enables the low baseline of the gas Raman spectroscopy and extends the integration time of the system. In addition, a convenient spatial filtering method is investigated. A multimode fiber with a suitable core diameter was employed to transmit the signal so that the fiber end face plays the role of pinhole, thus filtering the silica signal and reducing the baseline. The natural isotopes 12C16O2, 13C16O2, and 12C18O16O in ambient air can be observed using a 5-meter-long AR-HCF at 1 bar with a laser output power of 1.8 W and an integration time of 300 seconds. Limits of detection have been determined to be 0.5 ppm for 13C16O2 and 1.2 ppm for 12C16O2, which shows that the FERS with AR-HCF has remarkable potential for isotopes and multigas sensing.

Spectral analysis with highly collimated mini-LEDs as light sources for quantitative detection of direct bilirubin

Because the human eye cannot visually detect the results of direct bilirubin test papers accurately and quantitatively, this study proposes four different highly collimated mini light-emitting diodes (HC mini-LEDs) as light sources for detection. First, different concentrations of bilirubin were oxidized to biliverdin by FeCl3 on the test paper, and pictures were obtained with a smartphone. Next, the red, green, and blue (RGB) channels of the pictures were separated to average grayscale values, and their linear relationship with the direct bilirubin concentration was analyzed to detect bilirubin on the test paper noninvasively and quantitatively. The experimental results showed that when green HC mini-LEDs were used as the light sources and image analysis was performed using the G channel, for a direct bilirubin concentration range of 0.1-2 mg/dL, the G channel determination coefficient (R2) reached 0.9523 and limit of detection was 0.459 mg/dL. The detection method proposed herein has advantages such as rapid analysis, noninvasive detection, and digitization according to RGB grayscale changes in the images of the detection test paper.

Online Coupling of Size Exclusion Chromatography to Capillary Enhanced Raman Spectroscopy for the Analysis of Proteins and Biopharmaceutical Drug Products

The online coupling of size exclusion chromatography (SEC) to capillary enhanced Raman spectroscopy (CERS) based on a liquid core waveguide (LCW) flow cell was applied for the first time to assess the higher-order structure of different proteins. This setup allows recording of Raman spectra of the monomeric protein within complex mixtures, since SEC enables the separation of the monomeric protein from matrix components such as excipients of a biopharmaceutical product and higher molecular weight species (e.g., aggregates). The acquired Raman spectra were used for structural elucidation of well characterized proteins such as bovine serum albumin, hen egg white lysozyme, and β-lactoglobulin and of the monoclonal antibody rituximab in a medicinal product. Additionally, the CERS detection of the disaccharide sucrose, which is used as a stabilizing excipient, was quantified to achieve a limit of detection (LOD) of 120 μg and a limit of quantification (LOQ) of 363 μg injected on the column.

Molecular Interactions Identified by Two-Dimensional Analysis-Detailed Insight into the Molecular Interactions of the Antimalarial Artesunate with the Target Structure β-Hematin by Means of 2D Raman Correlation Spectroscopy

A thorough understanding of the interaction of endoperoxide antimalarial agents with their biological target structures is of utmost importance for the tailored design of future efficient antimalarials. Detailed insights into molecular interactions between artesunate and β-hematin were derived with a combination of resonance Raman spectroscopy, two-dimensional correlation analysis, and density functional theory calculations. Resonance Raman spectroscopy with three distinct laser wavelengths enabled the specific excitation of different chromophore parts of β-hematin. The resonance Raman spectra of the artesunate-β-hematin complexes were thoroughly analyzed with the help of high-resolution and highly sensitive two-dimensional correlation spectroscopy. Spectral changes in the peak properties were found with increasing artesunate concentration. Changes in the low-frequency, morphology-sensitive Raman bands indicated a loss in crystallinity of the drug-target complexes. Differences in the high-wavenumber region were assigned to increased distortions of the planarity of the structure of the target molecule due to the appearance of various coexisting alkylation species. Evidence for the appearance of high-valent ferryl-oxo species could be observed with the help of differences in the peak properties of oxidation-state sensitive Raman modes. To support those findings, the relaxed ground-state structures of ten possible covalent mono- and di-meso(Cm)-alkylated hematin-dihydroartemisinyl complexes were calculated using density functional theory. A very good agreement with the experimental peak properties was achieved, and the out-of-plane displacements along the lowest-frequency normal coordinates were investigated by normal coordinate structural decomposition analysis. The strongest changes in all data were observed in vibrations with a high participation of Cm-parts of β-hematin.

Noninvasive direct bilirubin detection by spectral analysis of color images using a Mini-LED light source

Urine test paper is a standard, noninvasive detection method for direct bilirubin, but this method can only achieve qualitative analysis and cannot achieve quantitative analysis. This study used Mini-LEDs as the light source, and direct bilirubin was oxidized to biliverdin by an enzymatic method with ferric chloride (FeCl₃) for labeling. Images were captured with a smartphone and evaluated for red (R), green (G), and blue (B) colors to analyze the linear relationship between the spectral change of the test paper image and the direct bilirubin concentration. This method achieved noninvasive detection of bilirubin. The experimental results demonstrated that Mini-LEDs can be used as the light source to analyze the grayscale value of the image RGB. For the direct bilirubin concentration range of 0.1-2 mg/dL, the green channel had the highest coefficient of determination coefficient (R²) of 0.9313 and a limit of detection of 0.56 mg/dL. With this method, direct bilirubin concentrations higher than 1.86 mg/dL can be quantitatively analyzed with the advantage of rapid and noninvasive detection.

Current and emerging technologies for the timely screening and diagnosis of neonatal jaundice

Neonatal jaundice is one of the most common clinical conditions affecting newborns. For most newborns, jaundice is harmless, however, a proportion of newborns develops severe neonatal jaundice requiring therapeutic interventions, accentuating the need to have reliable and accurate screening tools for timely recognition across different health settings. The gold standard method in diagnosing jaundice involves a blood test and requires specialized hospital-based laboratory instruments. Despite technological advancements in point-of-care laboratory medicine, there is limited accessibility of the specialized devices and sample stability in geographically remote areas. Lack of suitable testing options leads to delays in timely diagnosis and treatment of clinically significant jaundice in developed and developing countries alike. There has been an ever-increasing need for a low-cost, simple to use screening technology to improve timely diagnosis and management of neonatal jaundice. Consequently, several point-of-care (POC) devices have been developed to address this concern. This paper aims to review the literature, focusing on emerging technologies in the screening and diagnosing of neonatal jaundice. We report on the challenges associated with the existing screening tools, followed by an overview of emerging sensors currently in pre-clinical development and the emerging POC devices in clinical trials to advance the screening of neonatal jaundice. The benefits offered by emerging POC devices include their ease of use, low cost, and the accessibility of rapid response test results. However, further clinical trials are required to overcome the current limitations of the emerging POC's before their implementation in clinical settings. Hence, the need for a simple to use, low-cost POC jaundice detection technology for newborns remains an unsolved challenge globally.

Hydrogen and C2-C6 Alkane Sensing in Complex Fuel Gas Mixtures with Fiber-Enhanced Raman Spectroscopy

Power-to-gas is a heavily discussed option to store surplus electricity from renewable sources. Part of the generated hydrogen could be fed into the gas grid and lead to fluctuations in the composition of the fuel gas. Consequently, both operators of transmission networks and end users would need to frequently monitor the gas to ensure safety as well as optimal and stable operation. Currently, gas chromatography-based analysis methods are the state of the art. However, these methods have several downsides for time-resolved and distributed application and Raman gas spectroscopy is favorable for future point-of-use monitoring. Here, we demonstrate that fiber-enhanced Raman gas spectroscopy (FERS) enables the simultaneous detection of all relevant gases, from major (methane, CH₄; hydrogen, H₂) to minor (C2-C6 alkanes) fuel gas components. The characteristic peaks of H₂ (585 cm^-1), CH₄ (2917 cm^-1), isopentane (765 cm^-1), i-butane (798 cm^-1), n-butane (830 cm^-1), n-pentane (840 cm^-1), propane (869 cm^-1), ethane (993 cm^-1), and n-hexane (1038 cm^-1) are well resolved in the broadband spectra acquired with a compact spectrometer. The fiber enhancement achieved in a hollow-core antiresonant fiber enables highly sensitive measurements with limits of detection between 90 and 180 ppm for different hydrocarbons. Both methane and hydrogen were quantified with high accuracy with average relative errors of 1.1% for CH₄ and 1.5% for H₂ over a wide concentration range. These results show that FERS is ideally suited for comprehensive fuel gas analysis in a future, where regenerative sources lead to fluctuations in the composition of gas.

Activity and electron donor preference of two denitrifying bacterial strains identified by Raman gas spectroscopy

Human activities have greatly increased the input of reactive nitrogen species into the environment and disturbed the balance of the global N cycle. This imbalance may be offset by bacterial denitrification, an important process in maintaining the ecological balance of nitrogen. However, our understanding of the activity of mixotrophic denitrifying bacteria is not complete, as most research has focused on heterotrophic denitrification. The aim of this study was to investigate substrate preferences for two mixotrophic denitrifying bacterial strains, Acidovorax delafieldii and Hydrogenophaga taeniospiralis, under heterotrophic, autotrophic or mixotrophic conditions. This complex analysis was achieved by simultaneous identification and quantification of H₂, O₂, CO₂, ¹⁴N₂, ¹⁵N₂ and ¹⁵N₂O in course of the denitrification process with help of cavity-enhanced Raman spectroscopic (CERS) multi-gas analysis. To disentangle electron donor preferences for both bacterial strains, microcosm-based incubation experiments under varying substrate conditions were conducted. We found that Acidovorax delafieldii preferentially performed heterotrophic denitrification in the mixotrophic sub-experiments, while Hydrogenophaga taeniospiralis preferred autotrophic denitrification in the mixotrophic incubation. These observations were supported by stoichiometric calculations. The results demonstrate the prowess of advanced Raman multi-gas analysis to study substrate use and electron donor preferences in denitrification, based on the comprehensive quantification of complex microbial gas exchange processes.

An ultra-red fluorescent biosensor for highly sensitive and rapid detection of biliverdin

The important role of BV in clinical diagnostics of liver-related diseases has been established in veterinary medicine. However, the sensitivity and selectivity of the current BV assays remain relatively low compromising its wider application in clinical diagnosis. Herein, we developed a rapid and sensitive BV-detecting biosensor based on a novel far-red fluorescent protein smURFP, which produced fluorescence only through specific interaction with its cofactor BV. In our study, the binding of BV to smURFP was then systematically optimized based on the structures of the smURFP + BV complex to increase the sensitivity of our biosensor. A wide linear range from 0 μM to 25 μM was obtained in both chicken and human serum. The limit of detection (LOD) and limit of quantification (LOQ) for BV was as low as 0.4 nM and 1.5 nM in human serum, and 0.4 nM and 1.2 nM in chicken serum. To our knowledge, this is the lowest LOD that has ever been reported for a BV biosensor. Our study sheds light on the biological and clinical analysis of BV.

Physicochemical Understanding of Protein-Bound Quantum Dot-Based Sensitive Probing of Bilirubin: Validation with Real Samples and Implications of Protein Conformation in Sensing

Precise and rapid determination of free bilirubin (BR), a key biomarker of pathological conditions of the liver, is important clinical issue. The present study demonstrates that the combination of the strong specific affinic properties of protein, bovine serum albumin (BSA), toward bilirubin and luminescence of well-characterized semiconductor quantum dots (QDs) can offer a simple, fast, and sensitive technique for the determination of free bilirubin through quenching analysis. Here, BSA molecule not only stabilizes the quantum dots in an aqueous environment but also helps bring BR closer to QDs during the interactions of CdSe-BSA QDs with BR. Further, it is revealed through photophysical investigation that the conformation of protein molecule may play an important role in biomolecular sensing considering bilirubin as a model target molecule. The luminescence of CdSe-BSA QDs was highly responsive toward bilirubin, where nearly 90% of emission intensity was quenched on adding only 40 μM bilirubin, suggesting strong interactions involved between synthesized QDs and bilirubin. Solvent polarity dependence on luminescence changes confirms strong electrostatic interaction between the QDs and BR. The applicability of the synthesized quantum dots in sensing bilirubin has been checked in the presence of different possible interfering agents and also with plasma isolated from real blood samples of both normal and hepatitis patients. It was observed that bilirubin as control sample as well as in human serum sample can be optimally measured at pH 7.5, 25 °C. Thus, the proposed strategy being able to measure free BR even at least two orders of magnitude lower than bilirubin level in normal blood may provide a reasonable protocol to determine BR in the pathophysiology of many critical human diseases, like hepatitis and Gilbert's syndrome in the near future.

Fiber-Enhanced Raman Gas Spectroscopy for the Study of Microbial Methanogenesis

Microbial methanogenesis is a key biogeochemical process in the carbon cycle that is responsible for 70% of global emissions of the potent greenhouse gas methane (CH₄). Further knowledge about microbial methanogenesis is crucial to mitigate emissions, increase climate model accuracy, or advance methanogenic biogas production. The current understanding of the substrate use of methanogenic microbes is limited, especially regarding the methylotrophic pathway. Here, we present fiber-enhanced Raman spectroscopy (FERS) of headspace gases as an alternate tool to study methanogenesis and substrate use in particular. The optical technique is nondestructive and sensitive to CH₄, hydrogen (H₂), and carbon dioxide with a large dynamic range from trace levels (demonstrated LoDs: CH₄, 3 ppm; H₂, 49 ppm) to pure gases. In addition, the portable FERS system can provide quantitative information about methanol concentration in the liquid phase of microbial cultures through headspace gas sampling (LoD 25 ppm). We demonstrate how FERS gas sensing could enable us to track substrate and product levels of microbial methanogenesis with just one instrument. The versatility of Raman gas spectroscopy could moreover help us to elucidate links between nitrogen and carbon cycle in microbial communities in the near future.

Hollow core photonic crystal fiber-assisted Raman spectroscopy as a tool for the detection of Alzheimer's disease biomarkers

SIGNIFICANCE

Alzheimer's disease (AD) is an irreversible and progressive disorder that damages brain cells and impairs the cognitive abilities of the affected. Developing a sensitive and cost-effective method to detect Alzheimer's biomarkers appears vital in both a diagnostic and therapeutic perspective.

AIM

Our goal is to develop a sensitive and reliable tool for detection of amyloid β (1-42) peptide (Aβ42), a major AD biomarker, using fiber-enhanced Raman spectroscopy (FERS).

APPROACH

A hollow core photonic crystal fiber (HCPCF) was integrated with a conventional Raman spectroscopic setup to perform FERS measurements. FERS was then coupled with surface-enhanced Raman spectroscopy (SERS) to further amplify the Raman signal thanks to a combined FERS-SERS assay.

RESULTS

A minimum 20-fold enhancement of the Raman signal of Aβ42 as compared to a conventional Raman spectroscopy scheme was observed using the HCPCF-based light delivery system. The signal was further boosted by decorating the fiber core with gold bipyramids generating an additional SERS effect, resulting in an overall 200 times amplification.

CONCLUSIONS

The results demonstrate that the use of an HCPCF-based platform can provide sharp and intense Raman signals of Aβ42, in turn paving the way toward the development of a sensitive label-free detection tool for early diagnosis of AD.

Integrated photonics multi-waveguide devices for optical trapping and Raman spectroscopy: design, fabrication and performance demonstration

We realized integrated photonics multi-waveguide devices for optical trapping and Raman spectroscopy of particles in a fluid. In these devices, multiple beams directed towards the device center lead to a local field enhancement around this center and thus counteract the effect of light concentration near the facets, which is a disadvantage of dual-waveguide traps. Thus, a trapping region is created around the center, where a single particle of a size in a wide range can be trapped and studied spectroscopically, free from the influence of surfaces. We report the design (including simulations), fabrication and performance demonstration for multi-waveguide devices, using our Si₃N₄ waveguiding platform as the basis. The designed ridge waveguides, optimized for trapping and Raman spectroscopy, emit narrow beams. Multiple waveguides arranged around the central microbath result from fanning out of a single input waveguide using Y-splitters. A second waveguiding layer is implemented for detection of light scattered by the trapped particle. For reliable filling of the device with sample fluid, microfluidic considerations lead to side channels of the microbath, to exploit capillary forces. The interference of the multiple beams produces an array of hot spots around the bath center, each forming a local trap. This property is clearly confirmed in the experiments and is registered in videos. We demonstrate the performance of a 2-waveguide and a 16-waveguide device, using 1 and 3 μm polystyrene beads. Study of the confined Brownian motion of the trapped beads yields experimental values of the normalized trap stiffness for the in-plane directions. The stiffness values for the 16-waveguide device are comparable to those of tightly focused Gaussian beam traps and are confirmed by our own simulations. The Raman spectra of the beads (in this work measured via an objective) show clear peaks that are characteristic of polystyrene. In the low-wavenumber range, the spectra have a background that most likely originates from the Si₃N₄ waveguides.

Rapid Raman Spectroscopic Analysis of Stress Induced Degradation of the Pharmaceutical Drug Tetracycline

Stress factors caused by inadequate storage can induce the unwanted degradation of active compounds in pharmaceutical formulations. Resonance Raman spectroscopy is presented as an analytical tool for rapid monitoring of small concentration changes of tetracycline and the metabolite 4˗epianhydrotetracycline. These degradation processes were experimentally induced by changes in temperature, humidity, and irradiation with visible light over a time period of up to 23 days. The excitation wavelength λ_exc = 413 nm was proven to provide short acquisition times for the simultaneous Raman spectroscopic detection of the degradation of tetracycline and production of its impurity in small sample volumes. Small concentration changes could be detected (down to 1.4% for tetracycline and 0.3% for 4-epianhydrotetracycline), which shows the potential of resonance Raman spectroscopy for analyzing the decomposition of pharmaceutical products.

A Simple and Cost Effective Turn off Fluorescence Sensor for Biliverdin and Bilirubin Based on L-Cysteine Modulated Copper Nanoclusters

The present article reports the efficiency of L-cysteine modulated copper nanoclusters (L-cys-CuNCs) as a fluorescent probe for the selective determination of naturally occurring bile pigments biliverdin (BVD) and bilirubin (BLR). These pigments were found to quench the fluorescence of L-cys-CuNCs through static processes. Under optimized conditions, the proposed strategy permitted the quantification of BVD and BLR in the range 4.00 × 10^-5 to 5.00 × 10^-7M and 1.00×10^-5 to 1.00×10^-6 M respectively with limits of detection 2.33 × 10^-7M and 2.29 × 10^-7 M. The practical utility of the developed sensor have been investigated in spiked blood and urine samples.

Highly Sensitive Detection of the Antibiotic Ciprofloxacin by Means of Fiber Enhanced Raman Spectroscopy

Sepsis and septic shock exhibit a rapid course and a high fatality rate. Antibiotic treatment is time-critical and precise knowledge of the antibiotic concentration during the patients’ treatment would allow individual dose adaption. Over- and underdosing will increase the antimicrobial efficacy and reduce toxicity. We demonstrated that fiber enhanced Raman spectroscopy (FERS) can be used to detect very low concentrations of ciprofloxacin in clinically relevant doses, down to 1.5 µM. Fiber enhancement was achieved in bandgap shifted photonic crystal fibers. The high linearity between the Raman signals and the drug concentrations allows a robust calibration for drug quantification. The needed sample volume was very low (0.58 µL) and an acquisition time of 30 s allowed the rapid monitoring of ciprofloxacin levels in a less invasive way than conventional techniques. These results demonstrate that FERS has a high potential for clinical in-situ monitoring of ciprofloxacin levels.

Fiber-Array-Based Raman Hyperspectral Imaging for Simultaneous, Chemically-Selective Monitoring of Particle Size and Shape of Active Ingredients in Analgesic Tablets

The particle shape, size and distribution of active pharmaceutical ingredients (API) are relevant quality indicators of pharmaceutical tablets due to their high impact on the manufacturing process. Furthermore, the bioavailability of the APIs from the dosage form depends largely on these characteristics. Routinely, particle size and shape are only analyzed in the powder form, without regard to the effect of the formulation procedure on the particle characteristics. The monitoring of these parameters improves the understanding of the process; therefore, higher quality and better control over the biopharmaceutical profile can be ensured. A new fiber-array-based Raman hyperspectral imaging technique is presented for direct simultaneous in-situ monitoring of three different active pharmaceutical ingredients- acetylsalicylic acid, acetaminophen and caffeine- in analgesic tablets. This novel method enables a chemically selective, noninvasive assessment of the distribution of the active ingredients down to 1 µm spatial resolution. The occurrence of spherical and needle-like particles, as well as agglomerations and the respective particle size ranges, were rapidly determined for two commercially available analgesic tablet types. Subtle differences were observed in comparison between these two tablets. Higher amounts of acetaminophen were visible, more needle-shaped and bigger acetylsalicylic acid particles, and a higher incidence of bigger agglomerations were found in one of the analgesic tablets.

Diagnosing sickle cell disease and iron deficiency anemia in human blood by Raman spectroscopy

This work proposed the diagnosis of iron deficiency anemia (IDA) and sickle cell disease (SCD) in human blood caused by iron deficiency and hemoglobin S (HbS), which are among the most common anemias, by means of Raman spectroscopy. Whole blood samples from patients diagnosed with IDA and HbS, as well as from normal subjects (HbA), were obtained and submitted to Raman spectroscopy (830 nm, 150 mW, 400-1800 cm^-1 spectral range, 4 cm^-1 resolution). Difference spectra of IDA-HbA showed spectral features of hemoglobin with less intensity in the IDA, whereas the difference spectra of SCD-HbA showed spectral features of deoxyhemoglobin increased and of oxyhemoglobin decreased in SCD. An exploratory analysis by principal components analysis (PCA) showed that the peaks referred to oxy- and deoxyhemoglobin markedly differentiated SCD and HbA, as well as the increased amount of hemoglobin features in the SCD group, suggesting increased erythropoiesis. The IDA group showed hemoglobin features with lower intensities as well as peaks referred to the iron bonding to the porphyrin ring with reduced intensities when compared to the HbA. Discriminant analysis based on partial least squares (PLS-DA) and PCA (PCA-DA) showed that the IDA and SCD anemias could be discriminated from the HbA spectra with 95.0% and 93.8% of accuracy, for the PLS and PCA respectively, with sensitivity/specificity of 93.8%/95.7% for the PLS-DA model. The iron depletion and the sickling of erythrocytes could be identified by Raman spectroscopy and a spectral model based on PLS accurately discriminated these IDA and SCD samples from the normal HbA.

The complexity of porphyrin-like pigments in a marine annelid sheds new light on haem metabolism in aquatic invertebrates

True green pigments in the animal kingdom are scarce and are almost invariably porphyrinoids. Endogenous porphyrins resulting from the breakdown of haem are usually known as “bile pigments”. The pigmentation of intertidal Polychaeta has long gained attention due to its variety and vivid patterning that often seems incompatible with camouflage, as it occurs with Eulalia viridis, one of the few truly green Polychaeta. The present study combined UV and bright-field microscopy with HPLC to address the presence and distribution of pigments in several organs. The results showed two major types of porphyrin-like pigments, yellowish and greenish in colour, that are chiefly stored as intraplasmatic granules. Whereas the proboscis holds yellow pigments, the skin harbours both types in highly specialised cells. In their turn, oocytes and intestine have mostly green pigments. Despite some inter-individual variation, the pigments tend to be stable after prolonged storage at −20 °C, which has important implications for future studies. The results show that, in a foraging predator of the intertidal where melanins are circumscribed to lining the nervous system, porphyrinoid pigments have a key role in protection against UV light, in sensing and even as chemical defence against foulants and predators, which represents a remarkable adaptive feature.

Counterfeit and Substandard Test of the Antimalarial Tablet Riamet® by Means of Raman Hyperspectral Multicomponent Analysis

The fight against counterfeit pharmaceuticals is a global issue of utmost importance, as failed medication results in millions of deaths every year. Particularly affected are antimalarial tablets. A very important issue is the identification of substandard tablets that do not contain the nominal amounts of the active pharmaceutical ingredient (API), and the differentiation between genuine products and products without any active ingredient or with a false active ingredient. This work presents a novel approach based on fiber-array based Raman hyperspectral imaging to qualify and quantify the antimalarial APIs lumefantrine and artemether directly and non-invasively in a tablet in a time-efficient way. The investigations were carried out with the antimalarial tablet Riamet^® and self-made model tablets, which were used as examples of counterfeits and substandard. Partial least-squares regression modeling and density functional theory calculations were carried out for quantification of lumefantrine and artemether and for spectral band assignment. The most prominent differentiating vibrational signatures of the APIs were presented.

Water-soluble MoS2 quantum dots as effective fluorescence probe for the determination of bilirubin in human fluids

Bilirubin is an important biomarker in the diagnosis and prognosis of patients with liver disorders. Herein, we report a simple, rapid, sensitive and selective quantitative determination of bilirubin using molybdenum disulfide quantum dots (MoS₂ QDs) as a probe. The MoS₂ QDs were synthesized through a hydrothermal route by using sodium molybdate and cysteine as the starting materials. The obtained MoS₂ QDs exhibits strong luminescence property and excellent stability. The HR-TEM image shows that the size of the prepared MoS₂ QDs was 2.4 nm with a spherical morphology. The MoS₂ QDs emit intense blue photoluminescence (with excitation/emission peaks at 310/392 nm) under UV light and the fluorescence of MoS₂ QDs was drastically quenched by the addition of bilirubin. The Förster resonance energy transfer (FRET) and inner filter effect (IFE) between MoS₂ QDs and bilirubin resulted in the fluorescence quenching of MoS₂ QDs. The present method demonstrated high sensitivity towards bilirubin with the limit of detection (LOD) of 2.1 nM (S/N = 3). The MoS₂ QDs probe showed remarkable selectivity to bilirubin over other possible interferences. Moreover, the present fluorophore was successfully utilized for the detection of bilirubin in human serum and urine samples. QDs based fluorescence probe for the recognition of bilirubin is reported for the first time.

Fiber-Enhanced Raman Gas Spectroscopy for 18O-13C-Labeling Experiments

Stable isotopes are used in ecology to track and disentangle different processes and pathways. Especially for studies focused on the gas exchange of plants, sensing techniques that offer oxygen (O₂) and carbon dioxide (CO₂) sensitivity with isotopic discrimination are highly sought after. Addressing this challenge, fiber-enhanced Raman gas spectroscopy is introduced as a fast optical technique directly combining ¹³CO₂ and ¹²CO₂ as well as ¹⁸O₂ and ¹⁶O₂ measurements in one instrument. We demonstrate how a new type of optical hollow-core fiber, the so-called revolver fiber, is utilized for enhanced Raman gas sensing. Carbon dioxide and oxygen isotopologues were measured at concentrations expected when using ¹³C- and ¹⁸O-labeled gases in plant experiments. Limits of detection have been determined to be 25 ppm for CO₂ and 150 ppm for O₂. The combination of measurements with different integration times allows the creation of highly resolved broadband spectra. With the help of calculations based on density functional theory, the line at 1512 cm^-1 occurring in the oxygen spectrum is assigned to ¹⁸O¹⁶O. The relative abundances of the isotopologues ¹⁸O¹⁶O and nitrogen ¹⁵N¹⁴N were in good agreement with typical values. For CO₂, fiber-enhanced Raman spectra show the Fermi diad and hotbands of ¹²C¹⁶O₂, ¹³C¹⁶O₂, and ¹²C¹⁸O¹⁶O. Several weak lines were observed, and the line at 1426 cm^-1 was identified as originating from the (0 4 0 2) → (0 2 0 2) transition of ¹²C¹⁶O₂. With the demonstrated sensitivity and discriminatory power, fiber-enhanced Raman spectroscopy is a possible alternative means to investigate plant metabolism, directly combining ¹³CO₂ and ¹²CO₂ measurements with ¹⁸O₂ and ¹⁶O₂ measurements in one instrument. The presented method thus has large potential for basic analytical investigations as well as for applications in the environmental sciences.

Fiber-Enhanced Raman Sensing of Cefuroxime in Human Urine

Fiber-enhanced Raman spectroscopy was developed for the chemically selective and sensitive quantification of the important antibiotic cefuroxime in human urine. A novel optical sensor fiber was drawn and precisely prepared. In this fiber structure, light is strongly confined in the selectively filled liquid core, and the Raman scattered signal is collected with unprecedented efficiency over an extended interaction length. The filling, emptying, and robustness are highly improved due to the large core size (>30 μm). Broadband step-index guidance allows the free choice of the most suitable excitation wavelength in complex body fluids. The limit of detection of cefuroxime in human urine was improved by 2 orders of magnitude (to μM level). The quantification of cefuroxime was achieved in urine after oral administration. This method has great potential for the point-of-care monitoring of antibiotics concentrations and is an important step forward to enable clinicians to rapidly adjust doses.

Onsite cavity enhanced Raman spectrometry for the investigation of gas exchange processes in the Earth's critical zone

Raman gas spectrometry is introduced as a robust, versatile method for onsite, battery-powered field measurements of gases in the unsaturated and saturated critical zone. In this study, depth-profiles of the concentrations of oxygen and carbon dioxide were simultaneously monitored down to ∼70 meters depth in the subsurface via a transect of drilling holes located in the Hainich Critical Zone Exploratory in central Germany. A special multichannel monitoring system was designed to access and analyze these gases non-consumptively onsite in a closed loop measurement cycle. During the timeframe of six months, seasonal changes in groundwater levels and microbial activity were related to changes observed in gas concentrations. High oxygen concentrations were found in the depths surrounding a karstified aquifer complex, while low oxygen concentrations were found in a fractured aquifer complex. Raman gas depth-profiles complement standard dissolved oxygen measurements as they also deliver oxygen concentrations in the unsaturated zone. The measured depth-profiles of the gas concentrations indicated that regions of anoxia can exist between the aquifer complexes. Lateral transport of O₂ in the deeper aquifer complex provides a local source of O₂ that can influence metabolism. Correlations were found between the observed CO₂ concentrations and pH-values, indicating strong control of carbonate equilibria. The concentrations of O₂ and CO₂ were largely decoupled, thus simultaneous measurements of O₂ soil effluxes give additional insights into biotic and abiotic processes in the Hainich CZE. These results illustrate the versatility of robust onsite Raman multigas measurements of the soil atmosphere and how they can contribute to the analysis of complex processes in previous uncharacterized environments in the critical zone.

Microstructured Waveguides with Polyelectrolyte-Stabilized Gold Nanostars for SERS Sensing of Dissolved Analytes

A sensor based on microstructured waveguides (MWGs) with a hollow core inner surface covered with polyelectrolyte-layer-stabilized gold nanostars was developed for the SERS sensing of dissolved analytes. A polyelectrolyte-layer coating over the inner surface of glass cladding served as a spacer, reducing nonlinear optical effects in the glass near plasmonic hotspots of nanoparticles, as a stabilizing agent for thermodynamically unstable gold nanostars and as an optical coating for the fine-tuning of MWG bandgaps. This approach can be used to construct different kinds of SERS sensors for dissolved analytes, providing conservation, the prevention of coagulation, and the drying of a liquid sample for the time required to record the signal.

Photonic monitoring of treatment during infection and sepsis: development of new detection strategies and potential clinical applications

Despite the strong decline in the infection-associated mortality since the development of the first antibiotics, infectious diseases are still a major cause of death in the world. With the rising number of antibiotic-resistant pathogens, the incidence of deaths caused by infections may increase strongly in the future. Survival rates in sepsis, which occurs when body response to infections becomes uncontrolled, are still very poor if an adequate therapy is not initiated immediately. Therefore, approaches to monitor the treatment efficacy are crucially needed to adapt therapeutic strategies according to the patient's response. An increasing number of photonic technologies are being considered for diagnostic purpose and monitoring of therapeutic response; however many of these strategies have not been introduced into clinical routine, yet. Here, we review photonic strategies to monitor response to treatment in patients with infectious disease, sepsis, and septic shock. We also include some selected approaches for the development of new drugs in animal models as well as new monitoring strategies which might be applicable to evaluate treatment response in humans in the future. Figure Label-free probing of blood properties using photonics.

A Critical Review on Ultrasensitive, Spectroscopic-based Methods for High-throughput Monitoring of Bacteria during Infection Treatment

The world is in the midst of a pre-emptive public health emergency, one that is just as dramatic as the global aggressive viruses-related crises (Ebola, Zika, or SARS), but not as visible. The "superbugs" and their antimicrobial resistance do not cause much public alarm or awareness, but provoke financial losses of $100 trillion annually (WHO, http://www.who.int/mediacentre/commentaries/superbugs-action-now/en/ ). This status quo review offers an overview of ultrasensitive methods for high-throughput monitoring of bacteria during infection treatment, the effects of antibiotics on bacteria at single-cell level and the challenges we will face in their detection due to the extraordinary capability of these "superbugs" to gain and constantly improve multiresistance to antibiotics. A special emphasis is put on the ultrasensitive spectroscopic-based analysis techniques, using nanotechnology or not necessarily, that are more and more promising alternatives to conventional culture-based ones. The particular case of Mycobacteria detection is discussed based on recent reported work.

Ultrasensitive Detection of Antiseptic Antibiotics in Aqueous Media and Human Urine Using Deep UV Resonance Raman Spectroscopy

Deep UV resonance Raman spectroscopy is introduced as an analytical tool for ultrasensitive analysis of antibiotics used for empirical treatment of patients with sepsis and septic shock, that is, moxifloxacin, meropenem, and piperacillin in aqueous solution and human urine. By employing the resonant excitation wavelengths λ_exc = 244 nm and λ_exc = 257 nm, only a small sample volume and short acquisition times are needed. For a better characterization of the matrix urine, the main ingredients were investigated. The capability of detecting the antibiotics in clinically relevant concentrations in aqueous media (LODs: 13.0 ± 1.4 μM for moxifloxacin, 43.6 ± 10.7 μM for meropenem, and 7.1 ± 0.6 μM for piperacillin) and in urine (LODs: 36.6 ± 11.0 μM for moxifloxacin, and 114.8 ± 3.1 μM for piperacillin) points toward the potential of UV Raman spectroscopy as point-of-care method for therapeutic drug monitoring (TDM). This procedure enables physicians to achieve fast adequate dosing of antibiotics to improve the outcome of patients with sepsis.

Vibrational spectroscopic characterization of arylisoquinolines by means of Raman spectroscopy and density functional theory calculations

Seven new AIQ antimalarial agents were investigated using FT-NIR and deep-UV resonance Raman spectroscopy.