Photocatalytic reduction of CO2 over Ag/TiO2 nanocomposites prepared with a simple and rapid silver mirror method

NIR-II-Responsive Versatile Nanozyme Based on H2O2 Cycling and Disrupting Cellular Redox Homeostasis for Enhanced Synergistic Cancer Therapy

Disturbing cellular redox homeostasis within malignant cells, particularly improving reactive oxygen species (ROS), is one of the effective strategies for cancer therapy. The ROS generation based on nanozymes presents a promising strategy for cancer treatment. However, the therapeutic efficacy is limited due to the insufficient catalytic activity of nanozymes or their high dependence on hydrogen peroxide (H2O2) or oxygen. Herein, we reported a nanozyme (CSA) based on well-defined CuSe hollow nanocubes (CS) uniformly covered with Ag nanoparticles (AgNPs) to disturb cellular redox homeostasis and catalyze a cascade of intracellular biochemical reactions to produce ROS for the synergistic therapy of breast cancer. In this system, CSA could interact with the thioredoxin reductase (TrxR) and deplete the tumor microenvironment-activated glutathione (GSH), disrupting the cellular antioxidant defense system and augmenting ROS generation. Besides, CSA possessed high peroxidase-mimicking activity toward H2O2, leading to the generation of various ROS including hydroxyl radical (•OH), superoxide radicals (•O2-), and singlet oxygen (1O2), facilitated by the Cu(II)/Cu(I) redox and H2O2 cycling, and plentiful catalytically active metal sites. Additionally, due to the absorption and charge separation performance of AgNPs, the CSA exhibited excellent photothermal performance in the second near-infrared (NIR-II, 1064 nm) region and enhanced the photocatalytic ROS level in cancer cells. Owing to the inhibition of TrxR activity, GSH depletion, high peroxidase-mimicking activity of CSA, and abundant ROS generation, CSA displays remarkable and specific inhibition of tumor growth.

Enhancing photocatalytic CO2 reduction with TiO2-based materials: Strategies, mechanisms, challenges, and perspectives

The concentration of atmospheric CO2 has exceeded 400 ppm, surpassing its natural variability and raising concerns about uncontrollable shifts in the carbon cycle, leading to significant climate and environmental impacts. A promising method to balance carbon levels and mitigate atmospheric CO2 rise is through photocatalytic CO2 reduction. Titanium dioxide (TiO2), renowned for its affordability, stability, availability, and eco-friendliness, stands out as an exemplary catalyst in photocatalytic CO2 reduction. Various strategies have been proposed to modify TiO2 for photocatalytic CO2 reduction and improve catalytic activity and product selectivity. However, few studies have systematically summarized these strategies and analyzed their advantages, disadvantages, and current progress. Here, we comprehensively review recent advancements in TiO2 engineering, focusing on crystal engineering, interface design, and reactive site construction to enhance photocatalytic efficiency and product selectivity. We discuss how modifications in TiO2's optical characteristics, carrier migration, and active site design have led to varied and selective CO2 reduction products. These enhancements are thoroughly analyzed through experimental data and theoretical calculations. Additionally, we identify current challenges and suggest future research directions, emphasizing the role of TiO2-based materials in understanding photocatalytic CO2 reduction mechanisms and in designing effective catalysts. This review is expected to contribute to the global pursuit of carbon neutrality by providing foundational insights into the mechanisms of photocatalytic CO2 reduction with TiO2-based materials and guiding the development of efficient photocatalysts.

Size Effect of Cu Nanoparticles in Cu/g-C3N4 Composites on Properties for Highly Efficient Photocatalytic Reduction of CO2 to Methanol

The main goal of this work is to develop cheap photocatalysts for the efficient photocatalytic reduction of CO2 to methanol with water. A series of composites of Cu/g-C3N4 were prepared via a solvothermal method. Copper nanoparticle (Cu NP) size in Cu/g-C3N4 can be easily controlled by adjusting the synthesis temperature. The Cu/g-C3N4 material with the proper size of Cu NP (CuCN-100) had the best photocatalytic property (675 μmol·g-1·h-1) in reducing the amount of CO2 to methanol at room temperature under normal pressure. The particle size of Cu NPs is the key factor to improve the catalytic activity and stability because of the improved transfer and separation of photogenerated charges with the small Cu NPs. Although the sample with large Cu NPs (CuCN-200) initially gave a better activity than that of CuCN-100 due to the formation of double heterojunction, its activity was thoroughly lost after two runs resulting from the continuous photocorrosion. This work provides a valuable insight for preparing efficient semiconductor-metal photocatalysts.

Recent Trends in Plasmon-Assisted Photocatalytic CO2 Reduction

Direct photocatalytic reduction of CO₂ has become an highly active field of research. It is thus of utmost importance to maintain an overview of the various materials used to sustain this process, find common trends, and, in this way, eventually improve the current conversions and selectivities. In particular, CO₂ photoreduction using plasmonic photocatalysts under solar light has gained tremendous attention, and a wide variety of materials has been developed to reduce CO₂ towards more practical gases or liquid fuels (CH₄ , CO, CH₃ OH/CH₃ CH₂ OH) in this manner. This Review therefore aims at providing insights in current developments of photocatalysts consisting of only plasmonic nanoparticles and semiconductor materials. By classifying recent studies based on product selectivity, this Review aims to unravel common trends that can provide effective information on ways to improve the photoreduction yield or possible means to shift the selectivity towards desired products, thus generating new ideas for the way forward.

Strategies for improving the photocatalytic performance of metal-organic frameworks for CO2 reduction: A review

Photocatalytic CO₂ reduction is an appealing strategy for mitigating the environmental effects of greenhouse gases while simultaneously producing valuable carbon-neutral fuels. Numerous attempts have been made to produce effective and efficient photocatalysts for CO₂ reduction. In contrast, the selection of competitive catalysts continues to be a substantial hindrance and a considerable difficulty in the development of photocatalytic CO₂ reduction. It is vital to emphasize different techniques for building effective photocatalysts to improve CO₂ reduction performance in order to achieve a long-term sustainability. Metal-organic frameworks (MOFs) are recently emerging as a new type of photocatalysts for CO₂ reduction due to their excellent CO₂ adsorption capability and unique structural characteristics. This review examines the most recent breakthroughs in various techniques for modifying MOFs in order to improve their efficiency of photocatalytic CO₂ reduction. The advantages of MOFs using as photocatalysts are summarized, followed by different methods for enhancing their effectiveness for photocatalytic CO₂ reduction via partial ion exchange of metal clusters, design of bimetal clusters, the modification of organic linkers, and the embedding of metal complexes. For integrating MOFs with semiconductors, metallic nanoparticles (NPs), and other materials, a number of different approaches have been also reviewed. The final section of this review discusses the existing challenges and future prospects of MOFs as photocatalysts for CO₂ reduction. Hopefully, this review can stimulate intensive research on the rational design and development of more effective MOF-based photocatalysts for visible-light driven CO₂ conversion.

Effective CO2 Capture and Selective Photocatalytic Conversion into CH3OH by Hierarchical Nanostructured GO-TiO2-Ag2O and GO-TiO2-Ag2O-Arg

The attenuation of greenhouse gases, especially CO₂, as one of the main causes of global warming and their conversion into valuable materials are among the challenges that must be met in the 21st century. For this purpose, hierarchical ternary and quaternary hybrid photocatalysts based on graphene oxide, TiO₂, Ag₂O, and arginine have been developed for combined CO₂ capture and photocatalytic reductive conversion to methanol under visible and UV light irradiation. The material's band gap energy was estimated from the diffuse reflectance spectroscopy (DRS) Tauc analysis algorithm. Structural and morphological properties of the synthesized photocatalysts were studied using various analytical techniques such as Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The calculated band gaps for GO-TiO₂-Ag₂O and GO-TiO₂-Ag₂O-Arg were 3.18 and 2.62 eV, respectively. This reduction in the band gap showed that GO-TiO₂-Ag₂O-Arg has a significant visible light photocatalytic ability. The investigation of CO₂ capture for the designed catalyst showed that GO-TiO₂-Ag₂O-Arg and GO-TiO₂-Ag₂O have high CO₂ absorption capacities (1250 and 1185 mmol g^-1, respectively, at 10 bar and 273 K under visible light irradiation). The amounts of methanol produced by GO-TiO₂-Ag₂O and GO-TiO₂-Ag₂O-Arg were 8.154 and 5.1 μmol·gcat¹·h^-1 respectively. The main advantages of this study are the high efficiencies and selectivity of catalysts toward methanol formation. The reaction mechanism to understand the role of hybrid photocatalysts for CO₂ conversion is deliberated. In addition, these catalysts remain stable during the photocatalytic process and can be used repeatedly, proving to be enlightening for environmental research.

Research status, challenges and future prospects of renewable synthetic fuel catalysts for CO2 photocatalytic reduction conversion

In recent years, with global climate change, the utilization of carbon dioxide as a resource has become an important goal of human society to achieve carbon peaking and carbon neutrality. Among them, the catalytic conversion of carbon dioxide to generate renewable fuels has received great attention. As one of these methods, photocatalysis has its unique properties and mechanism, which can only rely on sunlight without inputting other energy. It is an emerging discipline with great development prospects. The core of photocatalysis lies in the development of photocatalysts with high activity, high selectivity, low cost, and high durability. This review first introduces the background and mechanism of photocatalysis, then introduces various types of photocatalysts based on different substrates, and analyzes the methods and mechanisms to improve the activity and selectivity of photocatalysts. Finally, combining the plasmon effect with photocatalysis, the review analyzes the promoting effect of the plasmon effect on the photocatalytic carbon dioxide synthesis of renewable fuels, which provides a new idea for it.

Nanomaterials as Photocatalysts-Synthesis and Their Potential Applications

Increasing demand for energy and environmental degradation are the most serious problems facing the man. An interesting issue that can contribute to solving these problems is the use of photocatalysis. According to literature, solar energy in the presence of a photocatalyst can effectively (i) be converted into electricity/fuel, (ii) break down chemical and microbial pollutants, and (iii) help water purification. Therefore, the search for new, efficient, and stable photocatalysts with high application potential is a point of great interest. The photocatalysts must be characterized by the ability to absorb radiation from a wide spectral range of light, the appropriate position of the semiconductor energy bands in relation to the redox reaction potentials, and the long diffusion path of charge carriers, besides the thermodynamic, electrochemical, and photoelectrochemical stabilities. Meeting these requirements by semiconductors is very difficult. Therefore, efforts are being made to increase the efficiency of photo processes by changing the electron structure, surface morphology, and crystal structure of semiconductors. This paper reviews the recent literature covering the synthesis and application of nanomaterials in photocatalysis.

TiO2/AgO composites by one step photo reduction technique as electron transport layers (ETL) for dye-sensitized solar cells

Dye-sensitized solar cell's electron transport layer is responsible for transporting photo-generated electrons to the outer circuit. Utilizing localized surface plasmon resonance (SPR), light absorption could be enhanced to a greater degree, which can drive dye molecules to excited state more effectively than far-field light. In this work, TiO₂ nanoparticles were prepared by solvothermal method, and Ag nanoparticles were decorated over TiO₂ surface through photodeposition method. XRD data of the TiO₂ sample exhibits anatase phase and in the Ag nanoparticle decorated TiO₂ sample, peaks corresponding to (111) planes of Ag was observed. UV-Vis absorption analysis of the TiO₂ and Ag decorated TiO₂ samples showed absorption in the UV region for the TiO_2, and the SPR effect was detected for the Ag deposited TiO₂ samples. Ag nanoparticles decorated over TiO₂ was observed to be spherical in shape through the images from transmission electron microscope. Presence of both Ag and AgO in the prepared sample was revealed through the data from X-ray photoelectron spectroscopy. The prepared material was used as photoanodes in the construction of the DSSCs, and their performance was evaluated.

CdS/WO3 S-scheme heterojunction with improved photocatalytic CO2 reduction activity

The anthropogenic emission of CO₂ in the environment affected our atmosphere, which caused a rapid change in the climate. It needs to reduce the excess CO₂ from the environment to maintain sustainability and keep it green. In this work, we have fabricated a CdS decorated WO₃ nanocomposite, improving the reduction ability of CO₂ into CO and CH₄ selectively in visible light. The construction of the heterojunction improved the stability of CdS with WO₃. It synergistically resulted in ~7.7 times the higher yield of CO and 2.3 times the higher yield of CH₄ than CdS using 20 wt% CdS decorated WO₃ nanocomposite in a mixture of N,N-dimethylformamide, triethylamine, and water in a 3:1:1 ratio. The 20 wt% CdS on WO₃ nanocomposite has proven an effective and selective photocatalyst with the relative yield of methanol up to four cycles. The nanocomposite photocatalysts were analyzed using instrumental techniques, such as XRD, XPS, HR-TEM, FTIR, TGA-DTA, UV-vis, PL spectroscopy, and PEC analysis.

Selective Photocatalytic Reduction of CO2 to Syngas Over Tunable Metal-Perovskite Interface

The extensive emission of CO₂ results in critical environmental issues, such as global warming. Photocatalytic CO₂ conversion is a meaningful route to convert CO₂ into useful chemicals. However, the highly selective reduction of CO₂ with the avoidance of hydrogen evolution is still challenging. Herein, the photocatalytic reduction CO₂ to synthesis gas (syngas) was achieved on a metal Ag socketed perovskite LaFeO₃ (LFO) catalytic interface prepared by an in-situ exsolution method. The conduction band of Ag-exsolved LFO is more negative than LFO, benefiting efficient CO₂ reduction. By tuning the dopant Ag cation in the lattice to nanoparticles pinned on the surface, the CO formation rate was improved around five-fold from 0.51 to 2.41 μmol g^-1  h^-1 . Meanwhile, the H₂ /CO molar ratio also showed strong dependence on the modality of Ag at the metal-perovskite interface. The design offers a promising pathway for transforming CO₂ to valuable chemicals based on efficient photocatalysts design.

Grafting Hypercrosslinked Polymers on TiO2 Surface for Anchoring Ultrafine Pd Nanoparticles: Dramatically Enhanced Efficiency and Selectivity toward Photocatalytic Reduction of CO2 to CH4

Metal deposition with photocatalyst is a promising way to surmount the restriction of fast e^- /h⁺ recombination to improve the photocatalytic performance. However, the improvement remains limited by the existing strategies adopted for depositing metal particles due to the serious aggregation and large unconnected area on photocatalyst surface. Here, a strategy is proposed by directly grafting hypercrosslinked polymers (HCPs) on TiO₂ surface to construct Pd-HCPs-TiO₂ composite with uniform dispersion of ultrafine Pd nanoparticles on HCPs surface. This composite with surface area of 373 m² g^-1 exhibits improved photocatalytic CO₂ conversion efficiency to CH₄ with an evolution rate of 237.4 µmol g^-1 h^-1 and selectivity of more than 99.9%. The enhancement can be ascribed to the grafted porous HCPs with high surface area and N heteroatom on TiO₂ surface for the stabilization of Pd nanoparticles, favoring the electron transfer and CO₂ adsorption for selective CH₄ production. This strategy may hold the promise for design and construction of porous organic polymer with semiconductor for efficient photocatalytic conversion.

Recent Advances in Plasmonic Photocatalysis Based on TiO2 and Noble Metal Nanoparticles for Energy Conversion, Environmental Remediation, and Organic Synthesis

Plasmonic photocatalysis has emerged as a prominent and growing field. It enables the efficient use of sunlight as an abundant and renewable energy source to drive a myriad of chemical reactions. For instance, plasmonic photocatalysis in materials comprising TiO₂ and plasmonic nanoparticles (NPs) enables effective charge carrier separation and the tuning of optical response to longer wavelength regions (visible and near infrared). In fact, TiO₂ -based materials and plasmonic effects are at the forefront of heterogeneous photocatalysis, having applications in energy conversion, production of liquid fuels, wastewater treatment, nitrogen fixation, and organic synthesis. This review aims to comprehensively summarize the fundamentals and to provide the guidelines for future work in the field of TiO₂ -based plasmonic photocatalysis comprising the above-mentioned applications. The concepts and state-of-the-art description of important parameters including the formation of Schottky junctions, hot electron generation and transfer, near field electromagnetic enhancement, plasmon resonance energy transfer, scattering, and photothermal heating effects have been covered in this review. Synthetic approaches and the effect of various physicochemical parameters in plasmon-mediated TiO₂ -based materials on performances are discussed. It is envisioned that this review may inspire and provide insights into the rational development of the next generation of TiO₂ -based plasmonic photocatalysts with target performances and enhanced selectivities.

Janus silver/ternary silver halide nanostructures as plasmonic photocatalysts boost the conversion of CO2 to acetaldehyde

Photocatalytic conversion of carbon dioxide (CO₂) to liquid product acetaldehyde (CH₃CHO) remains a great challenge due to the involvement of a complex 10-electron reduction process and a sluggish C-C coupling reaction. Herein, we report the synthesis of Janus silver/ternary silver halide (Ag/AgClBr) nanostructures through precisely manipulating the growth kinetics and its function as a plasmonic photocatalyst to boost the conversion of CO₂ to CH₃CHO. The obtained Janus nanostructures featuring both spatially separated architecture and broad light-harvesting capability facilitate the photocatalytic reduction of CO₂ under solar illumination. The photocatalytic CO₂ reduction with the characteristics of high activity and good selectivity can generate a 10-electron reduction product CH₃CHO with a generation rate of 209.3 ± 9.5 μmol h^-1 g^-1 and a selectivity of 96.9%, which are rarely achieved in previously reported photocatalytic CO₂ reduction systems. The excellent photocatalytic performance can be ascribed to the plasmonic effect of Ag nanocrystals and the favorable active sites on the catalyst surface. This research demonstrates for the first time the utilization of the Janus Ag/AgClBr nanostructures to generate the value-added C₂ liquid product through photocatalytic CO₂ reduction, paving the way for the design and construction of novel plasmonic photocatalysts.

High-efficient photocatalytic degradation of commercial drugs for pharmaceutical wastewater treatment prospects: A case study of Ag/g-C3N4/ZnO nanocomposite materials

Pharmaceutical drugs' removal from wastewater by photocatalytic oxidation process is considered as an attractive approach and environmentally friendly solution. This report aims to appraise the practical application potential of Ag/g-C₃N₄/ZnO nanorods toward the wastewater treatment of the pharmaceutical industry. The catalysts are synthesized by straightforward and environmentally-friendly strategies. Specifically, g-C₃N₄/ZnO nanorods heterostructure is constructed by a simple self-assembly method, and then Ag nanoparticles are decorated on g-C₃N₄/ZnO nanorods by a photoreduction route. The results show that three commercial drugs (paracetamol, amoxicillin, and cefalexin) with high concentration (40 mg L^-1) are significantly degraded in the existence of a small dosage of Ag/g-C₃N₄/ZnO nanorods (0.08 g L^-1). The Ag/g-C₃N₄/ZnO nanorods photocatalyst exhibits degradation performance of paracetamol higher 3.8, 1.8, 1.3 times than pristine g-C₃N₄, ZnO nanorods, and g-C₃N₄/ZnO nanorods. Furthermore, Ag/g-C₃N₄/ZnO nanorods have an excellent reusability and a chemical stability that achieved paracetamol degradation efficiency of 78% and remained chemical structure of the photocatalyst after five cycles. In addition, the photocatalytic mechanism explanation and comparison of photocatalytic drugs' degradation ability have also been discussed in this study.

Silver nanomaterials: synthesis and (electro/photo) catalytic applications

In view of their unique characteristics and properties, silver nanomaterials (Ag NMs) have been used not only in the field of nanomedicine but also for diverse advanced catalytic technologies. In this comprehensive review, light is shed on general synthetic approaches encompassing chemical reduction, sonochemical, microwave, and thermal treatment among the preparative methods for the syntheses of Ag-based NMs and their catalytic applications. Additionally, some of the latest innovative approaches such as continuous flow integrated with MW and other benign approaches have been emphasized that ultimately pave the way for sustainability. Moreover, the potential applications of emerging Ag NMs, including sub nanomaterials and single atoms, in the field of liquid-phase catalysis, photocatalysis, and electrocatalysis as well as a positive role of Ag NMs in catalytic reactions are meticulously summarized. The scientific interest in the synthesis and applications of Ag NMs lies in the integrated benefits of their catalytic activity, selectivity, stability, and recovery. Therefore, the rise and journey of Ag NM-based catalysts will inspire a new generation of chemists to tailor and design robust catalysts that can effectively tackle major environmental challenges and help to replace noble metals in advanced catalytic applications. This overview concludes by providing future perspectives on the research into Ag NMs in the arena of electrocatalysis and photocatalysis.

One-pot synthesis of Ag-Cu-Cu2O/C nanocomposites derived from a metal-organic framework as a photocatalyst for borylation of aryl halide

Mixed metal-metal oxide/C (Ag-Cu-Cu2O/C) nanocomposites were synthesized by the heat treatment of a metal-organic framework under a N2 flow using the one-pot synthesis method. The as-prepared nanocomposites were characterized using a range of techniques, such as TEM, elemental mapping, XRD, N2 sorption, UV-Vis DRS, and XPS. The nanoparticles were successfully formed with high dispersion in porous carbon materials and high crystallinity based on the analysis results. The Ag-Cu-Cu2O/C nanocomposites (35 nm) showed high photocatalytic activity and good recyclability toward the borylation of aryl halides under a xenon arc lamp. This result can enhance the interest in photocatalysis for various applications, particularly in organic reactions, using a simple and efficient synthesis method.

Applications of electron spin resonance spectroscopy in photoinduced nanomaterial charge separation and reactive oxygen species generation

Nano-metals, nano-metal oxides, and carbon-based nanomaterials exhibit superior solar-to-chemical/photo-electron transfer properties and are potential candidates for environmental remediations and energy transfer. Recent research effort focuses on enhancing the efficiency of photoinduced electron-hole separation to improve energy transfer in catalytic reactions. Electron spin resonance (ESR) spectroscopy has been used to monitor the generation of electron/hole and reactive oxygen species (ROS) during nanomaterial-mediated photocatalysis. Using ESR coupled with spin trapping and spin labeling techniques, the underlying photocatalytic mechanism involved in the nanomaterial-mediated photocatalysis was investigated. In this review, we briefly introduced ESR principle and summarized recent advancements using ESR spectroscopy to characterize electron-hole separation and ROS production by different types of nanomaterials.

Visible-Light-Driven Ag-Modified TiO2 Thin Films Anchored on Bamboo Material with Antifungal Memory Activity against Aspergillus niger

A round-the-clock photocatalyst with energy-storage ability has piqued the interest of researchers for removing microbial contaminants from indoor environments. This work presents a moderate round-the-clock method for inhibiting the growth of fungus spores on bamboo materials using Ag-modified TiO₂ thin films. Photoactivated antifungal coating with catalytic memory activity was assembled on a hydrophilic bamboo by first anchoring anatase TiO₂ thin films (TB) via hydrogen bonding and then decorating them with Ag nanoparticles (ATB) via electrostatic interactions. Antifungal test results show that the Ag/TiO₂ composite films grown on the bamboo surface produced a synergistic antifungal mechanism under both light and dark conditions. Interestingly, post-illumination catalytic memory was observed for ATB, as demonstrated by the inhibition of Aspergillus niger (A. niger) spores, in the dark after visible light was removed, which could be attributed to the transfer of photoexcited electrons from TiO₂ to Ag, their trapping on Ag under visible-light illumination, and their release in the dark after visible light was removed. The mechanism study revealed that the immobilized Ag nanoparticles served the role of “killing two birds with one stone”: increasing visible-light absorption through surface plasmon resonance, preventing photogenerated electron–hole recombination by trapping electrons, and contributing to the generation of ●O₂⁻and ●OH. This discovery creates a pathway for the continuous removal of indoor air pollutants such as volatile organic compounds, bacteria, and fungus in the day and night time.

Synthesis of TiO2/RGO with plasmonic Ag nanoparticles for highly efficient photoelectrocatalytic reduction of CO2 to methanol toward the removal of an organic pollutant from the atmosphere

The synergistic photoelectrochemical (PEC) technology is a robust process for the conversion of CO₂ into fuels. However, designing a highly efficient UV-visible driven photoelectrocatalyst is still challenging. Herein, a plasmonic Ag NPs modified TiO₂/RGO photoelectrocatalyst (Ag-TiO₂/RGO) has been designed for the PEC CO₂ reduction into selective production of CH₃OH. HR-TEM analysis revealed that Ag and TiO₂ NPs with average sizes of 4 and 7 nm, respectively, were densely grown on the few-micron-sized 2D RGO nanosheets. The physicochemical analysis was used to determine the optical and textural properties of the Ag-TiO₂/RGO nanohybrids. Under VU-Vis light illumination, Ag-TiO₂/RGO photocathode possessed a current density of 23.5 mA cm^-2 and a lower electrode resistance value of 125 Ω in CO₂-saturated 1.0 M KOH-aqueous electrolyte solution. Catalytic studies showed that the Ag-TiO₂/RGO photocathode possessed a remarkable PEC CO₂ reduction activity and selective production of CH₃OH with a yield of 85 μmol L^-1 cm^-2, the quantum efficiency of 20% and Faradic efficiency of 60.5% at onset potential of -0.7 V. A plausible PEC CO₂ reduction mechanism over Ag-TiO₂/RGO photocathode is schematically demonstrated. The present work gives a new avenue to develop high-performance and stable photoelectrocatalyst for PEC CO₂ reduction towards sustainable liquid fuels production.

The CO2 photoconversion over reduced graphene oxide based on Ag/TiO2 photocatalyst in an advanced meso-scale continuous-flow photochemical reactor

This study aims at examining the use of an advanced meso-scale continuous-flow photochemical reactor for the photocatalytic conversion of CO₂ with water into fuel over TiO₂ (P25), Ag/TiO₂, and Ag/TiO₂/RGO catalysts. The silver loaded photocatalysts were prepared by one-step process via hydrothermal method. The prepared photocatalysts were characterized by various characterization techniques in order to identify the morphological, chemical, physical, and optical properties. The photocatalytic activity of the as-prepared catalysts was firstly examined by the photoelectrochemical (PEC) measurements and secondly by the photocatalytic reduction of CO₂ in the proposed setup. Liquid products were analyzed using gas chromatography-mass spectrometry (GC-MS) and total organic carbon (TOC) techniques. It was found that the ternary composite revealed an outstanding performance towards CO₂ photocatalytic reduction, where its selectivity was directed towards methanol production. The incorporation of graphene nanosheets enhanced the photocatalytic reduction of CO₂ by 3.3 and 9.4 times compared with Ag/TiO₂ and bare TiO₂, respectively, using the proposed photochemical reactor in a continuous mode. This study sheds the light on a novel type of a photocatalytic reactor where CO₂ conversion over Ag/TiO₂/RGO ternary composite was evaluated. A meso-scale continuous-flow photochemical reactor.

Highlights and challenges in the selective reduction of carbon dioxide to methanol

Carbon dioxide (CO₂) is the iconic greenhouse gas and the major factor driving present global climate change, incentivizing its capture and recycling into valuable products and fuels. The 6H⁺/6e^- reduction of CO₂ affords CH₃OH, a key compound that is a fuel and a platform molecule. In this Review, we compare different routes for CO₂ reduction to CH₃OH, namely, heterogeneous and homogeneous catalytic hydrogenation, as well as enzymatic catalysis, photocatalysis and electrocatalysis. We describe the leading catalysts and the conditions under which they operate, and then consider their advantages and drawbacks in terms of selectivity, productivity, stability, operating conditions, cost and technical readiness. At present, heterogeneous hydrogenation catalysis and electrocatalysis have the greatest promise for large-scale CO₂ reduction to CH₃OH. The availability and price of sustainable electricity appear to be essential prerequisites for efficient CH₃OH synthesis.

Silver nanoparticle-decorated titanium dioxide nanowire systems via bioinspired poly(L-DOPA) thin film as a surface-enhanced Raman spectroscopy (SERS) platform, and photocatalyst

Silver nanostructure decorated-titanium dioxide (TiO2) nanocomposite systems with their unique characteristics provide extraordinary performance in various applications including surface-enhanced Raman spectroscopy (SERS), and photocatalysis. Despite the recent progress, novel, simple, effective, low-cost, reducing and stabilizing agent-free, and easy-to-tune approaches are heavily demanded for the preparation of these nanocomposites. In this context, we propose the fabrication of silver nanostructure decorated TiO2 nanowires (TiO2 NWs) through a thin interphase layer of the polymer of 3,4-dihydroxyphenyl-l-alanine (PLDOPA). In the first step, TiO2 NWs were synthesized through the hydrothermal method and then a conformal thin film of PLDOPA was deposited onto the TiO2 NWs (TiO2@PLDOPA) by oxidative polymerization of l-DOPA. Having various functional groups including catechol and amine, the PLDOPA thin-film reduced the silver ions onto the TiO2 NWs and stabilized the resultant nanocomposites without the employment of any surfactant, reducing agent, and seed material. By simply tuning the amount of silver ions, we could manipulate the size, morphology, and interparticle distance of silver nanostructures decorated onto the TiO2@PLDOPA colloidal composite system (TiO2@PLDOPA@Ag NP). The TiO2@PLDOPA@Ag nanocomposite systems provided unique properties as an ideal SERS platform and photocatalyst. The optimized TiO2@PLDOPA@Ag nanosystem demonstrated a high SERS activity, reproducibility, and self-cleaning property with an enhancement factor of 5.1 × 105. As a photocatalyst, the TiO2@PLDOPA@Ag NP systems provided remarkable performance under visible light irradiation in the catalytic degradation of methylene blue.

Recent Advances in TiO2-Based Heterojunctions for Photocatalytic CO2 Reduction With Water Oxidation: A Review

Photocatalytic conversion of CO₂ into solar fuels has gained increasing attention due to its great potential for alleviating the energy and environmental crisis at the same time. The low-cost TiO₂ with suitable band structure and high resistibility to light corrosion has proven to be very promising for photoreduction of CO₂ using water as the source of electrons and protons. However, the narrow spectral response range (ultraviolet region only) as well as the rapid recombination of photo-induced electron-hole pairs within pristine TiO₂ results in the low utilization of solar energy and limited photocatalytic efficiency. Besides, its low selectivity toward photoreduction products of CO₂ should also be improved. Combination of TiO₂ with other photoelectric active materials, such as metal oxide/sulfide semiconductors, metal nanoparticles and carbon-based nanostructures, for the construction of well-defined heterostructures can enhance the quantum efficiency significantly by promoting visible light adsorption, facilitating charge transfer and suppressing the recombination of charge carriers, resulting in the enhanced photocatalytic performance of the composite photocatalytic system. In addition, the adsorption and activation of CO₂ on these heterojunctions are also promoted, therefore enhancing the turnover frequency (TOF) of CO₂ molecules, so as to the improved selectivity of photoreduction products. This review focus on the recent advances of photocatalytic CO₂ reduction via TiO₂-based heterojunctions with water oxidation. The rational design, fabrication, photocatalytic performance and CO₂ photoreduction mechanisms of typical TiO₂-based heterojunctions, including semiconductor-semiconductor (S-S), semiconductor-metal (S-M), semiconductor-carbon group (S-C) and multicomponent heterojunction are reviewed and discussed. Moreover, the TiO₂-based phase heterojunction and facet heterojunction are also summarized and analyzed. In the end, the current challenges and future prospects of the TiO₂-based heterostructures for photoreduction of CO₂ with high efficiency, even for practical application are discussed.

Efficient photocatalytic degradation of dyes using photo-deposited Ag nanoparticles on ZnO structures: simple morphological control of ZnO

In this work, morphology-controlled ZnO structures were prepared via a hydrothermal method by simple adjustments in the NaOH concentration. The NaOH concentration variation from 0.2 to 1.2 M resulted in the formation of ZnO structures in shapes such as walnut, spherical flower, flower, rod, and urchin-like. The extent of OH- ions is the main factor influencing the growth of ZnO structures. Well-defined morphologies, good crystallinity, and optical properties were obtained for all ZnO structures. Among these ZnO structures, ZnOsf (spherical flower-like) structure showed a greater percentage of photodegradation of methyl orange and rhodamine B dyes. Surface plasmon resonance was achieved by modifying the surface of ZnO with Ag nanoparticles. ZnOsf was loaded with Ag nanoparticles by a facile photo-deposition method. Ag-ZnOsf showed superior photoactivity and recyclability for the degradation of methyl orange and rhodamine B. Therefore, modification of different ZnO structures can help realize potential catalysts for future environmental applications.

Selectivity control of organic chemical synthesis over plasmonic metal-based photocatalysts

The factors, issues, and design of plasmonic metal-based photocatalysts for selective photosynthesis of organic chemicals have been discussed.

Highly Selective, Defect-Induced Photocatalytic CO2 Reduction to Acetaldehyde by the Nb-Doped TiO2 Nanotube Array under Simulated Solar Illumination

The adsorption and activation of CO₂ molecules on the surface of photocatalysts are critical steps to realize efficient solar energy-induced CO₂ conversion to valuable chemicals. In this work, a defect engineering approach of a high-valence cation Nb-doping into TiO₂ was developed, which effectively enhanced the adsorption and activation of CO₂ molecules on the Nb-doped TiO₂ surface. A highly ordered Nb-doped TiO₂ nanotube array was prepared by anodization of the Ti-Nb alloy foil and subsequent annealing at 550 °C in air for 2 h for its crystallization. Our sample showed a superior photocatalytic CO₂ reduction performance under simulated solar illumination. The main CO₂ reduction product was a higher-energy compound of acetaldehyde, which could be easily transported and stored and used to produce various key chemicals as intermediates. The acetaldehyde production rate was over ∼500 μmol·g^-1·h^-1 with good stability for repeated long-time uses, and it also demonstrated a superior product selectivity to acetaldehyde of over 99%. Our work reveals that the Nb-doped TiO₂ nanotube array could be a promising candidate with high efficiency and good product selectivity for the photocatalytic CO₂ reduction with solar energy.

The Photocatalytic and Antibacterial Performance of Nitrogen-Doped TiO2: Surface-Structure Dependence and Silver-Deposition Effect

Catalysts for visible-light-driven oxidative cleaning processes and antibacterial applications (also in the dark) were developed. In order to extend the photoactivity of titanium dioxide into the visible region, nitrogen-doped TiO₂ catalysts with hollow and non-hollow structures were synthesized by co-precipitation (NT-A) and sol–gel (NT-U) methods, respectively. To increase their photocatalytic and antibacterial efficiencies, various amounts of silver were successfully loaded on the surfaces of these catalysts by using a facile photo-deposition technique. Their physical and chemical properties were evaluated by using scanning electron microscopy (SEM), transmission electron microscopy–energy dispersive X-ray spectroscopy (TEM–EDS), Brunauer–Emmett–Teller (BET) surface area, X-ray diffraction (XRD), and diffuse reflectance spectra (DRS). The photocatalytic performances of the synthesized catalysts were examined in coumarin and 1,4-hydroquinone solutions. The results showed that the hollow structure of NT-A played an important role in obtaining high specific surface area and appreciable photoactivity. In addition, Ag-loading on the surface of non-hollow structured NT-U could double the photocatalytic performance with an optimum Ag concentration of 10⁻⁶ mol g⁻¹, while a slight but monotonous decrease was caused in this respect for the hollow surface of NTA upon increasing Ag concentration. Comparing the catalysts with different structures regarding the photocatalytic performance, silverized non-hollow NT-U proved competitive with the hollow NT-A catalyst without Ag-loading for efficient visible-light-driven photocatalytic oxidative degradations. The former one, due to the silver nanoparticles on the catalyst surface, displayed an appreciable antibacterial activity, which was comparable to that of a reference material practically applied for disinfection in polymer coatings.

Localized surface plasmon resonance enhanced visible-light-driven CO2 photoreduction in Cu nanoparticle loaded ZnInS solid solutions

Visible-light-driven photocatalysts have shown tremendous prospects in solving the energy crisis and environmental problems, thanks to their wide spectral response and high quantum efficiency. Several strategies including the expansion of visible light response and the improvement of solar energy utilization and photocatalytic quantum efficiency via more effective separation of photogenerated carriers are the current focuses of research that direct the design and fabrication of viable photocatalysts. Herein, a series of composite photocatalysts assembled from plasmonic Cu nanoparticles (NPs) and Zn3In2S6 (ZIS) solid solutions were synthesized by means of a simple solvothermal method. In comparison with the pristine ZIS semiconductor, Cu NP loaded ZIS solid solutions showed greatly enhanced photocatalytic activity, selectivity and stability towards CO2 reduction under visible irradiation. Of note was that the optimized ZIS-Cu2 exhibited an enhanced CH4 production rate of ca. 292 μL g-1 h-1 and a selectivity of ca. 71.1%, which were among the highest numbers reported hitherto. The localized surface plasmon resonance (LSPR) effect, shown by surface Cu NPs, was believed to play a critical role in the enhanced CO2 photoreduction efficiency. More importantly, the introduction of plasmonic Cu NPs could restrain the recombination of photogenerated electron-hole pairs and promote the migration of photogenerated electrons to better participate in the photocatalytic CO2 reduction in the presence of water vapor. This work thus provides a facile means to design robust and flexible composite photocatalysts for visible-light-driven CO2 photoreduction with high efficiency.

Electrochemical CYFRA21-1 DNA sensor with PCR-like sensitivity based on AgNPs and cascade polymerization

In this work, a new method of CYFRA21-1 DNA (tDNA) detection based on electrochemically mediated atom transfer radical polymerization (e-ATRP) and surface-initiated reversible addition-fragmentation chain transfer polymerization (SI-RAFT) cascade polymerization and AgNP deposition is proposed. Firstly, the peptide nucleic acid (PNA) probe is captured on a gold electrode by Au-S bonds for specific recognition of tDNA. After hybridization, PNA/DNA strands provide high-density phosphate groups for the subsequent ATRP initiator by the identified carboxylate-Zr⁴⁺-phosphate chemistry. Then, a large number of monomers are successfully grafted from the DNA through the e-ATRP reaction. After that, the chain transfer agent of SI-RAFT and methacrylic acid (MAA) are connected by recognized carboxylate-Zr⁴⁺-carboxylate chemistry. Subsequently, through SI-RAFT, the resulting polymer introduces numerous aldehyde groups, which could deposit many AgNPs on tDNA through silver mirror reaction, causing significant amplification of the electrochemical signal. Under optimal conditions, this designed method exhibits a low detection limit of 0.487 aM. Moreover, the method enables us to detect DNA at the level of PCR-like and shows high selectivity and strong anti-interference ability in the presence of serum. It suggests that this new sensing signal amplification technology exhibits excellent potential of application in the early diagnosis of non-small cell lung cancer (NSCLC). Graphical abstract Electrochemical detection principle for CYFRA21-1 DNA based on e-ATRP and SI-RAFT signal amplification technology.

Bimetal composites for photocatalytic reduction of CO2 to CO in the near-infrared region by the SPR effect

A major challenge in the field of photocatalytic carbon dioxide (CO₂) reduction is to design catalyst systems featuring high selectivity for CO production, long-term stability and a composition of Earth-abundant elements.

Ultra-small subnano TiOx clusters as excellent cocatalysts for the photocatalytic degradation of tetracycline on plasmonic Ag/AgCl

Subnano TiO_x clusters as cocatalysts on Ag/AgCl exhibit an unparalleled TC photodegradation reaction rate under simulated sunlight irradiation.

Enhanced photocatalysis and anticancer activity of green hydrothermal synthesized Ag@TiO2 nanoparticles

Titanium dioxide (TiO₂) nanoparticles (NPs) have been doped with varying amounts (0.005, 0.010 and 0.015 M) of silver nanoparticles (Ag NPs) using hydrothermal method. Further, in this work, a green approach was followed for the formation of Ag@TiO₂ NPs using Aloe vera gel as a capping and reducing agent. The structural property confirmed the presence of anatase phase TiO₂. Increased peak intensity was observed while increasing the Ag concentration. Further, the morphological and optical properties have been studied, which confirmed the effective photocatalytic behavior of the prepared Ag@TiO₂ NPs. The photocatalytic performance of Ag@TiO₂ has been considered for the degradation of picric acid in the visible light region. The concentration at 0.010 M of the prepared Ag@TiO₂ has achieved higher photocatalytic performance within 50 min, which could be attributed to its morphological behavior. Similarly, anticancer activity against lung cancer cell lines (A549) was also determined. The Ag@TiO₂ NPs generated a large quantity of reactive oxygen species (ROS), resulting in complete cancer cell growth suppression after their systemic in vitro administration. Ag@TiO₂ NPs was adsorbed visible light that leads to an enhanced anticancer sensitivity by killing and inhibiting cancer cell reproduction through cell viability assay test. It was clear that 0.015 M of Ag@TiO₂ NPs were highly effective against human lung cancer cell lines and showed increased production of ROS in cancer cell lines due to the medicinal behavior of the Aloe vera gel.

In Situ Formation of Ag Nanoparticles in Mesoporous TiO2 Films Decorated on Bamboo via Self-Sacrificing Reduction to Synthesize Nanocomposites with Efficient Antifungal Activity

We developed a novel green approach for the in situ fabrication of Ag NPs in mesoporous TiO2 films via the bamboo self-sacrificing reduction of Ag(NH3)2+ ions, which can inhibit fungal growth on the bamboo surface. Mesoporous anatase TiO2 (MT) films were first synthesized on bamboo via a hydrothermal method. Then, Ag NPs with a 5.3 nm mean diameter were incorporated into the pore channels of optimal MT/bamboo (MTB) samples at room temperature without the addition of reducing agents, such that the Ag NPs were almost entirely embedded into the MT films. Our analysis indicated that the solubilized lignin from bamboo, which is rich in oxygen-containing functional groups, serves as a green reductant for reducing the Ag(NH3)2+ ions to Ag NPs. Antifungal experiments with Trichoderma viride under dark conditions highlighted that the antifungal activity of the Ag/MT/bamboo samples were greater than those of naked bamboo, MTB, and Ag/bamboo, suggesting that these hybrid nanomaterials produce a synergistic antifungal effect that is unrelated to photoactivity. The inhibition of Penicillium citrinum effectively followed a similar trend. This newly developed bamboo protection method may provide a sustainable, eco-friendly, and efficient method for enhancing the antifungal characteristics of traditional bamboo, having the potential to prolong the service life of bamboo materials, particularly under dark conditions.

The Development of Cocatalysts for Photoelectrochemical CO2 Reduction

The ever-increasing anthropogenic consumption of fossil fuels and the resulting large emission of CO₂ have led to a severe energy crisis and climate change. Photocatalytic reduction of CO₂ into fuels using solar energy is considered as a promising way to address these two problems. In particular, photoelectrochemical (PEC) reduction of CO₂ can integrate and optimize the advantages of both photocatalysis and electrocatalysis for improved conversion efficiency and selectivity. In addition to the charge generation and separation, the efficient reduction of CO₂ on the surface of a semiconductor-based photoelectrode remains a scientifically critical challenge, which can be greatly enhanced by the surface modification of cocatalysts. Herein, the recent developments of cocatalysts in PEC CO₂ reduction over semiconductor-based photoelectrodes are described, and the basic principles of PEC CO₂ reduction and the function of the cocatalyst in photoelectrocatalysis are discussed. The structure optimization between the photoelectrodes and the cocatalysts is also summarized since the loading of cocatalyst may shield the incident light and hinder charge transfer between them. Furthermore, the challenges and perspectives for PEC reduction of CO₂ are also presented.

Ag-Based nanocomposites: synthesis and applications in catalysis

Ag-Based nanocomposites, including supported Ag nanocomposites and bimetallic Ag nanocomposites, have been intensively investigated as highly efficient catalysts because of their high activity and stability, easy preparation, low cost, and low toxicity. Herein, we systematically summarize and comprehensively evaluate versatile synthetic strategies for the preparation of Ag-based nanocomposites, and outline their recent advances in catalytic oxidation, catalytic reduction, photocatalysis and electrocatalysis. In addition, the challenges and prospects related to Ag-based nanocomposites for various catalytic applications are also discussed. In light of the most recent advances in Ag-based nanocomposites for catalysis applications, this review provides a comprehensive assessment on the material selection, synthesis and catalytic characteristics of these catalysts, which offers a strategic guide to build a close connection between Ag nanocomposites and catalysis applications.