Recent advances in the use of quantum dots for photoelectrochemical bioanalysis

Ternary Heterojunction Graphitic Carbon Nitride/Cupric Sulfide/Titanium Dioxide Photoelectrochemical Sensor for Sesamol Quantification and Antioxidant Synergism

Sesamol (SM) is a potent natural antioxidant that can quench free radicals and modulate the cholinergic system in the brain, thereby ameliorating memory and cognitive impairment in Alzheimer's disease patients. Moreover, the total antioxidant capacity can be amplified by synergistic interactions between different antioxidants. Here, we constructed a ternary heterojunction graphitic carbon nitride/cupric sulfide/titanium dioxide (g-C3N4/CuS/TiO2) photoelectrochemical (PEC) sensor for the quantification of SM and its synergistic interactions with other antioxidants. Crucially, the Schottky barrier in ternary semiconductors considerably enhances electron transfer. The PEC sensor showed a wide linear range for SM detection, ranging from 2 to 1277 μmol L-1, and had a limit of detection of 1.8 μmol L-1. Remarkably, this sensing platform could evaluate the synergism between SM and five typical lipid-soluble antioxidants: tert-butyl hydroquinone, vitamin E, butyl hydroxyanisole, propyl gallate, and butylated hydroxytoluene. Owing to its low redox potential, SM could reduce antioxidant radicals and promote their regeneration, which increased the overall antioxidant performance. The g-C3N4/CuS/TiO2 PEC sensor exhibited high sensitivity, satisfactory selectivity, and stability, and was successfully applied for SM determination in both soybean and peanut oils. The findings of this study provide guidance for the development of nutritional foods, nutrition analysis, and the treatment of diseases caused by free radicals.

Photoelectrochemical sensors based on paper and their emerging applications in point-of-care testing

Point-of-care testing (POCT) technology is urgently required owing to the prevalence of the Internet of Things and portable electronics. In light of the attractive properties of low background and high sensitivity caused by the complete separation of excitation source and detection signal, the paper-based photoelectrochemical (PEC) sensors, featured with fast in analysis, disposable and environmental-friendly have become one of the most promising strategies in POCT. Therefore, in this review, the latest advances and principal issues in the design and fabrication of portable paper-based PEC sensors for POCT are systematically discussed. Primarily, the flexible electronic devices that can be constructed by paper and the reasons why they can be used in PEC sensors are expounded. Afterwards, the photosensitive materials involved in paper-based PEC sensor and the signal amplification strategies are emphatically introduced. Subsequently, the application of paper-based PEC sensors in medical diagnosis, environmental monitoring and food safety are further discussed. Finally, the main opportunities and challenges of paper-based PEC sensing platforms for POCT are briefly summarized. It provides a distinct perspective for researchers to construct paper-based PEC sensors with portable and cost-effective, hoping to enlighten the fast development of POCT soon after, as well as benefit human society.

Semiconductor quantum dots in photoelectrochemical sensors from fabrication to biosensing applications

Semiconductor quantum dots (QDs) are a promising class of nanomaterials for developing new photoelectrodes and photoelectrochemistry systems for energy storage, transfer, and biosensing applications. These materials have unique electronic and photophysical properties and can be used as optical nanoprobes in displays, biosensors, imaging, optoelectronics, energy storage and energy harvesting. Researchers have recently been exploring the use of QDs in photoelectrochemical (PEC) sensors, which involve exciting a QD-interfaced photoactive material with a flashlight source and generating a photoelectrical current as an output signal. The simple surface properties of QDs also make them suitable for addressing issues related to sensitivity, miniaturization, and cost-effectiveness. This technology has the potential to replace current laboratory practices and equipment, such as spectrophotometers, used for testing sample absorption and emission. Semiconductor QD-based PEC sensors offer simple, fast, and easily miniaturized sensors for analyzing a variety of analytes. This review summarizes the various strategies for interfacing QD nanoarchitectures for PEC sensing, as well as their signal amplification. PEC sensing devices, particularly those used for the detection of disease biomarkers, biomolecules (glucose, dopamine), drugs, and various pathogens, have the potential to revolutionize the biomedical field. This review discusses the advantages of semiconductor QD-based PEC biosensors and their fabrication methods, with a focus on disease diagnostics and the detection of various biomolecules. Finally, the review provides prospects and considerations for QD-based photoelectrochemical sensor systems in terms of their sensitivity, speed, and portability for biomedical applications.

The role of molecular fluorophores in the photoluminescence of carbon dots derived from citric acid: current state-of-the-art and future perspectives

Carbon dots (CDs), an emerging class of nanomaterials, have attracted considerable attention due to their intriguing photophysical properties. Despite their indisputable potential of utilization in many fascinating areas of research and life, some fundamental aspects concerning their structure and the origin of their photoluminescence (PL) properties still await clarification. The mechanism of PL emission of CDs is associated with their structure, which is dependent on the carbonization process. At the initial stages of CD synthesis via a bottom-up approach, molecular fluorophores are considered to dominate the optical characteristics of the resulting nanomaterials. In this review, the recent progress in the use of molecular state theory for explanation of the structure-property relationship in CDs is summarized. This review focuses exclusively on the molecular fluorophores existing in nanomaterials prepared from citric acid (CA) as one of the most frequent carbon sources reported for the bottom-up synthesis of CDs. Consequently, the most relevant transformations of CA and the history of molecular fluorophores derived from it are described, followed by an in-depth discussion on their relevance in understanding the specific photophysical properties of blue-, green-, and red-emitting CDs. Finally, the challenging issues and future perspectives of molecular state PL mechanism exploration in CDs are highlighted.

Recent Advances of Nanostructured Materials for Photoelectrochemical Bioanalysis

Nowadays, the emerging photoelectrochemical (PEC) bioanalysis has drawn intensive interest due to its numerous merits. As one of its core elements, functional nanostructured materials play a crucial role during the construction of PEC biosensors, which can not only be employed as transducers but also act as signal probes. Although both chemical composition and morphology control of nanostructured materials contribute to the excellent analytical performance of PEC bioassay, surveys addressing nanostructures with different dimensionality have rarely been reported. In this review, according to classification based on dimensionality, zero-dimensional, one-dimensional, two-dimensional, and three-dimensional nanostructures used in PEC bioanalysis are evaluated, with an emphasis on the effect of morphology on the detection performances. Furthermore, using the illustration of recent works, related novel PEC biosensing patterns with promising applications are also discussed. Finally, the current challenges and some future perspectives in this field are addressed based on our opinions.

Perspectives and advancements in the design of nanomaterials for targeted cancer theranostics

Cancer continues to be one of the most challenging diseases to be treated and is one of the leading causes of deaths around the globe. Cancers account for 13% of all deaths each year, with cancer-related mortality expected to rise to 13.1 million by the year 2030. Although, we now have a large library of chemotherapeutic agents, the problem of non-selectivity remains the biggest drawback, as these substances are toxic not only to cancerous cells, but also to other healthy cells in the body. The limitations with chemotherapy and radiation have led to the discovery and development of novel strategies for safe and effective treatment strategies to manage the menace of cancer. Researchers have long justified and have shed light on the emergence of nanotechnology as a potential area for cancer therapy and diagnostics, whereby, nanomaterials are used primarily as nanocarriers or as delivery agents for anticancer drugs due to their tumor targeting properties. Furthermore, nanocarriers loaded with chemotherapeutic agents also overcome biological barriers such as renal and hepatic clearances, thus improving therapeutic efficacy with lowered morbidity. Theranostics, which is the combination of rationally designed nanomaterials with cancer-targeting moieties, along with protective polymers and imaging agents has become one of the core keywords in cancer research. In this review, we have highlighted the potential of various nanomaterials for their application in cancer therapy and imaging, including their current state and clinical prospects. Theranostics has successfully paved a path to a new era of drug design and development, in which nanomaterials and imaging contribute to a large variety of cancer therapies and provide a promising future in the effective management of various cancers. However, in order to meet the therapeutic needs, theranostic nanomaterials must be designed in such a way, that take into account the pharmacokinetic and pharmacodynamics properties of the drug for the development of effective carcinogenic therapy.

Self-powered cathodic photoelectrochemical aptasensor based on in situ-synthesized CuO-Cu2O nanowire array for detecting prostate-specific antigen

A facile and sensitive self-powered cathodic photoelectrochemical (PEC) aptasensor is reported for the detection of prostate-specific antigen (PSA) based on CuO-Cu₂O nanowire array grown on Cu mesh (CuO-Cu₂O NWA/CM) as electrode. The mixed narrow band gaps of the CuO-Cu₂O heterostructure ensured its wide absorption band, effective electron/hole separation, and high photocatalytic activity in the visible region. In addition, nanowires directly grown on the substrate provided high specific surface area and exposed abundant active sites, thus guaranteeing its high photocatalytic efficiency. Therefore, the self-powered sensor exhibited favorable analytical performance with fast response, wide linear ranges of 0.01 to 5 ng/mL and 5 to 100 ng/mL, an acceptable detection limit of 3 pg/mL, and reasonable selectivity and stability. The proposed CuO-Cu₂O NWA/CM can be considered a promising visible light-responsive photoactive material for fabrication of PEC aptasensor with high performance. Graphical abstract a Schematic illustration of construction process of PEC sensing platform based on the CuO-Cu₂O composite for PSA detection. b Schematic mechanism of the operating PEC system.

Plasmonic Enhanced Gold Nanoclusters-Based Photoelectrochemical Biosensor for Sensitive Alkaline Phosphatase Activity Analysis

Low-toxicity gold nanoclusters-decorated Ag@SiO₂ (Au NCs-Ag@SiO₂) nanocomposites modified plasmonic photoelectrodes were first fabricated to improve the photoelectric properties of Au NCs and practical application in biological detection. Through adjusting distance between Au NCs and plasmonic silver nanoparticles (Ag NPs), the photocurrent intensity of Au NCs enhanced by 3.8 times attributed to strong competition between enhancement functions of hot electron transfer, local electric field, light scattering effects, and quenching functions of nonradiative energy transfer. Further comparison between experimental results and theoretical simulations were conducted to gain a deeper understanding toward the photoelectric enhancement mechanism. Moreover, Au NCs-Ag@SiO₂ nanocomposites was successfully applied to the construction of photoelectrochemical (PEC) biosensors for sensitively detecting alkaline phosphatase activity. This proposed PEC biosensor showed a wide linear range from 0.04 to 400 U·L^-1, and a low detection limit of 0.022 U·L^-1.

CdS Quantum Dots Modified Photoelectrochemical Biosensor for TATA-Binding Protein Probing

The photoelectrochemical (PEC) biosensor, in which light is utilized to excite the photoactive species and current is employed as the detection signal, is a newly appeared yet dynamically developing technique for biological analysis. Based on the assay of DNA binding proteins upon visible light irradiation, a PEC biosensor is constructed for successfully probing a DNA-protein interaction.

Electrochemical immunosensors for the detection of cytokine tumor necrosis factor alpha: A review

In this review, we focus on recent developments in nonlabeled@label-free and labeled@sandwich assay concepts of tumor necrosis factor-alpha (TNF-α) using numerous electrochemical approaches. The fundamental role of such nanostructured materials for the improvement of the analytical response and thus the analytical figures of merit of various TNF-α sensing operations were revealed. Also, this examination focused on recent developments in immuno-electrochemical cytokine TNF-α sensors based on nanostructured materials from 2006 to 2019.

Promoting hole transfer for photoelectrochemical water oxidation through a manganese cluster catalyst bioinspired by natural photosystem II

A Mn₄O₄–cubane molecule bioinspired by the natural photosystem II was used as a co-catalyst in photoelectrochemical water oxidation.

Nanotechnology and nanomaterial-based no-wash electrochemical biosensors: from design to application

Nanotechnology and nanomaterial based electrochemical biosensors (ECBs) have achieved great development in many fields, such as clinical diagnosis, food analysis, and environmental monitoring. Nowadays, the single-handed pursuit of sensitivity and accuracy cannot meet the demands of detection in many in situ and point-of-care (POC) circumstances. More and more attention has been focused on simplifying the operation procedure and reducing detection time, and thus no-wash assay has become one of the most effective ways for the continuous development of ECBs. However, there are many challenges to realize no-wash detection in the real analysis, such as redox interferences, multiple impurities, non-conducting protein macromolecules, etc. Furthermore, the complex detection circumstance in different application fields makes the realization of no-wash ECBs more complicated and difficult. Thanks to the updated nanotechnology and nanomaterials, in-depth analysis of the obstacles in the detection process and various methods for fabricating no-wash ECBs, most issues have been largely resolved. In this review, we have systematically analyzed the nanomaterial based design strategy of the state-of-the-art no-wash ECBs in the past few years. Following that, we summarized the challenges in the detection process of no-wash ECBs and their applications in different fields. Finally, based on the summary and analysis in this review, we also evaluated and discussed future prospects from the design to the application of ECBs.

A Cu2+-doped two-dimensional material-based heterojunction photoelectrode: application for highly sensitive photoelectrochemical detection of hydrogen sulfide

In this work, on the basis of a Cu2+-doped two-dimensional material-based heterojunction photoelectrode, a novel anodic photoelectrochemical (PEC) sensing platform was constructed for highly sensitive detection of endogenous H2S. Briefly, with g-C3N4 and TiO2 as representative materials, the sensor was fabricated by modifying g-C3N4/TiO2 nanorod arrays (NAs) onto the surface of fluorine-doped tin oxide (FTO) and then doping Cu2+ as a Cu x S (x = 1, 2) precursor. After the binding of S2- with surface-attached Cu2+, the signal was quenched owing to the in situ generation of Cu x S which offers trapping sites to hinder generation of photocurrent signals. Since the photocurrent inhibition was intimately associated with the concentration of S2-, a highly sensitive PEC biosensor was fabricated for H2S detection. More importantly, the proposed sensing platform showed the enormous potential of g-C3N4/TiO2 NAs for further development of PEC bioanalysis, which may serve as a common basis for other semiconductor applications and stimulates the exploration of numerous high-performance nanocomposites.

Advances in biosensors for the detection of ochratoxin A: Bio-receptors, nanomaterials, and their applications

Ochratoxin A (OTA) is a class of mycotoxin mainly produced by the genera Aspergillus and Penicillium. OTA can cause various forms of kidney, liver and brain diseases in both humans and animals although trace amount of OTA is normally present in food. Therefore, development of fast and sensitive detection technique is essential for accurate diagnosis of OTA. Currently, the most commonly used detection methods are enzyme-linked immune sorbent assays (ELISA) and chromatographic techniques. These techniques are sensitive but time consuming, and require expensive equipment, highly trained operators, as well as extensive preparation steps. These drawbacks limit their wide application in OTA detection. On the contrary, biosensors hold a great potential for OTA detection at for both research and industry because they are less expensive, rapid, sensitive, specific, simple and portable. This paper aims to provide an extensive overview on biosensors for OTA detection by highlighting the main biosensing recognition elements for OTA, the most commonly used nanomaterials for fabricating the sensing interface, and their applications in different read-out types of biosensors. Current challenges and future perspectives are discussed as well.

A 3D printing-based portable photoelectrochemical sensing device using a digital multimeter

An enzyme-free photoelectrochemical sensing method based on a 3D-printing device was developed for CEA detection coupling glucose-encapsulated liposomes with digital multimeter readout.

A highly sensitive photoelectrochemical VEGF165 biosensor with a dual signal amplification strategy by using AgVO3 as a photoactive material

We developed a novel “signal-on” photoelectrochemical (PEC) aptasensor with a near-zero background signal by using AgVO₃ as a single photoactive material for the sensitive detection of vascular endothelial growth factor (VEGF₁₆₅).

Tremella-like ZnIn2S4/graphene composite based photoelectrochemical sensor for sensitive detection of dopamine

Tremella-like ZnIn₂S₄ (ZISt) and flower-like microsphere ZnIn₂S₄ (ZISm) were synthesized via a straightforward hydrothermal method. It was found that the ZISt was superior to ZISm for photoelectrochemical (PEC) sensing because of its large surface area and high photocatalytic activity. A composite of ZISt and graphene (GR) was prepared and used for the PEC sensing of dopamine (DA). Here DA acted as an electron donor to scavenge the hole and inhibit the charge recombination. The GR enhanced visible light absorption and accelerated electron transfer, amplifying the photocurrent signal. The strong chelating coordination interaction between DA and Zn(II) in ZISt guaranteed the selective adsorption of target analyte. Thus the resulting ZISt/GR photoelectrode showed sensitive and selective PEC response to DA. Under the optimized conditions, the linear response range was from 0.01 to 20 μM, and the detection limit was down to 0.001 μM. Additionally, the sensor had good stability and reproducibility, and it could be used for the detection of DA in real samples.

Bismuth Oxyiodide Couples with Glucose Oxidase: A Special Synergized Dual-Catalysis Mechanism for Photoelectrochemical Enzymatic Bioanalysis

On the basis of a special synergized dual-catalysis mechanism, this work reports the preparation of a BiOI-based heterojunction and its use for cathodic photoelectrochemical (PEC) oxidase biosensing, which, unexpectedly, revealed that hydrogen peroxide (H₂O₂) had a greater impact than dioxygen (O₂). Specifically, the BiOI layer was in situ formed on the substrate through an impregnating hydroxylation method for the following coupling with the model enzyme of glucose oxidases (GOx). The constructed cathodic PEC enzyme sensor exhibited a good analytical performance of rapid response, high stability, and good selectivity. Especially, glucose-induced H₂O₂-controlled enhancement of the photocurrent was recorded rather than the commonly observed O₂-dependent suppression of the signal. This interesting phenomenon was attributed to a special synergized dual-catalysis mechanism. Briefly, this study is expected to provide a new BiOI-based photocathode for general PEC bioanalysis development and to inspire more interest in the design and construction of a novel heterojunction for advanced photocathodic bioanalysis. More importantly, the mechanism revealed here would offer a totally different perspective for the use of a biomimetic catalyst in the design of future PEC enzymatic sensing and the understanding of relevant signaling routes as well as the implementation of innovative PEC devices.

Near-Infrared-to-Ultraviolet Light-Mediated Photoelectrochemical Aptasensing Platform for Cancer Biomarker Based on Core-Shell NaYF4:Yb,Tm@TiO2 Upconversion Microrods

Titanium dioxide (TiO₂; as a potential photosensitizer) has good photocurrent performance and chemical stability but often exhibits low utilization efficiency under ultraviolet (UV) region excitation. Herein, we devised a near-infrared light-to-UV light-mediated photoelectrochemical (PEC) aptasensing platform for the sensitive detection of carcinoembryonic antigen (CEA) based on core-shell NaYF₄:Yb,Tm@TiO₂ upconversion microrods by coupling with target-triggered rolling circle amplification (RCA). The upconversion microrods synthesized through the hydrothermal reaction could act as a photosensing platform to convert the near-infrared (near-IR) excitation into UV emission for generation of photoinduced electrons. The target analyte was determined on a functional magnetic bead by using the corresponding aptamers with a sandwich-type assay format. Upon target CEA introduction, a complex was first formed between capture aptamer-1-conjugated magnetic bead (Apt1-MB) and aptamer-2-primer DNA (Apt2-pDNA). Thereafter, the carried primer DNA by the aptamer-2 paired with linear padlock DNA to trigger the RCA reaction. The guanine (G)-rich product by RCA reaction was cleaved by exonuclease I and exonuclease III (Exos I/III), thereby resulting in the formation of numerous individual guanine bases to enhance the photocurrent of core-shell NaYF₄:Yb,Tm@TiO₂ upconversion microrods under near-IR illumination (980 nm). Under optimal conditions, the near-IR light-mediated PEC aptasensing system could exhibit good photoelectrochemical response toward target CEA and allowed for the detection of target CEA as low as 3.6 pg mL^-1. High reproducibility and good accuracy were achieved for analysis of human serum specimens. Importantly, the near-IR-activated PEC aptasensing scheme provides a promising platform for ultrasensitive detection of other biomolecules.

Specific bioanalytical optical and photoelectrochemical assays for detection of methanol in alcoholic beverages

Methanol is a poison which is frequently discovered in alcoholic beverages. Innovative methods to detect methanol in alcoholic beverages are being constantly developed. We report for the first time a new strategy for the detection of methanol using fluorescence spectroscopy and photoelectrochemical (PEC) analysis. The analytical system is based on the oxidation of cysteine (CSH) with hydrogen peroxide (H₂O₂) enzymatically generated by alcohol oxidase (AOx). H₂O₂ oxidizes capping agent CSH, modulating the growth of CSH-stabilized cadmium sulphide quantum dots (CdS QDs). Disposable screen-printed carbon electrodes (SPCEs) modified with a conductive osmium polymer (Os-PVP) complex were employed to quantify resulting CdS QDs. This polymer facilitates the "wiring" of in situ enzymatically generated CdS QDs, which photocatalyze oxidation of 1-thioglycerol (TG), generating photocurrent as the readout signal. Likewise, we proved that our systems did not suffer from interference by ethanol. The PEC assays showed better sensitivity than conventional methods, covering a wide range of potential applications for methanol quantification.

Design of a Dual Channel Self-Reference Photoelectrochemical Biosensor

Photoelectrochemical (PEC) biosensors are usually based on the single photocurrent change caused by biorecognition events between analytes and probes. However, the photocurrent may be influenced by other factors besides target analytes and bring a false result. To improve the accuracy and reliability of PEC detection, here we proposed the design of a dual channel self-reference PEC biosensors. CdTe and CdTe-graphene oxide (GO) were chosen as the two PEC active material and modified onto two adjacent areas on the ITO electrode. Then they were functionalized with Aflatoxin B1 (AFB1) aptamer through covalent binding or physical adsorption, respectively. The cathodic current from CdTe-GO and anodic current from CdTe can be well distinguished by adjusting the bias voltage. With the simultaneous application of "signal on" and "signal off" model, dual concentration information may be obtained in one detection and serve as a reference for each other. By comparing these two results, this sensor can clearly distinguish whether the signal change was caused by AFB1 or other interference factors. Compared to traditional PEC biosensors, this design can provide a better accuracy and reliability, which is promising in the future development of PEC detection.

Quantum-dots-based photoelectrochemical bioanalysis highlighted with recent examples

Photoelectrochemical (PEC) bioanalysis is a newly developed methodology that provides an exquisite route for innovative biomolecular detection. Quantum dots (QDs) are semiconductor nanocrystals with unique photophysical properties that have attracted tremendous attentions among the analytical community. QDs-based PEC bioanalysis comprises an important research hotspot in the field of PEC bioanalysis due to its combined advantages and potentials. Currently, it has ignited increasing interests as demonstrated by increased research papers. This review aims to cover the most recent advances in this field. With the discussion of recent examples of QDs-PEC bioanalysis from the literatures, special emphasis will be placed on work reporting on fundamental advances in the signaling strategies of QDs-based PEC bioanalysis from 2013 to now. Future prospects in this field are also discussed.

Connecting quantum dots with enzymes: mediator-based approaches for the light-directed read-out of glucose and fructose oxidation

The combination of the biocatalytic features of enzymes with the unique physical properties of nanoparticles in a biohybrid system provides a promising approach for the development of advanced bioelectrocatalytic devices. This study describes the construction of photoelectrochemical signal chains based on CdSe/ZnS quantum dot (QD) modified gold electrodes as light switchable elements, and low molecular weight redox molecules for the combination with different biocatalysts. Photoelectrochemical and photoluminescence experiments verify that electron transfer can be achieved between the redox molecules hexacyanoferrate and ferrocene, and the QDs under illumination. Since for both redox mediators a concentration dependent photocurrent change has been found, light switchable enzymatic signal chains are built up with fructose dehydrogenase (FDH) and pyrroloquinoline quinone-dependent glucose dehydrogenase ((PQQ)GDH) for the detection of sugars. After immobilization of the enzymes at the QD electrode the biocatalytic oxidation of the substrates can be followed by conversion of the redox mediator in solution and subsequent detection at the QD electrode. Furthermore, (PQQ)GDH has been assembled together with ferrocenecarboxylic acid on top of the QD electrode for the construction of a funtional biohybrid architecture, showing that electron transfer can be realized from the enzyme over the redox mediator to the QDs and subsequently to the electrode in a completely immobilized fashion. The results obtained here do not only provide the basis for light-switchable biosensing and bioelectrocatalytic applications, but may also open the way for self-driven point-of-care systems by combination with solar cell approaches (power generation at the QD electrode by enzymatic substrate consumption).

A one-pot hydrothermal synthesis of graphene/CdS:Mn photocatalyst for photoelectrochemical sensing of glutathione

The GR/CdS:Mn composite was fabricated by a simple hydrothermal synthesis which illustrates excellent performance for the photoelectrochemical detection of glutathione.