Silk fibroin/chitosan thiourea hydrogel scaffold with vancomycin and quercetin-loaded PLGA nanoparticles for treating chronic MRSA osteomyelitis in rats

Chronic osteomyelitis presents significant treatment challenges, necessitating an efficient system for infection elimination and bone repair. This study developed a natural hydrogel scaffold using silk fibroin (SF) and chitosan thiourea (CST), incorporating vancomycin (VC) and quercetin (QC) loaded PLGA nanoparticles (NPs) for dual-purpose treatment. SF/CST hydrogel scaffolds exhibited homogeneous porosity and smaller interconnected pore size than pure SF and pure CST hydrogel scaffolds. Optimal PLGA/QC NPs measured 206 nm in size, displayed spherical morphology, had uniform distribution, and achieved 87 % QC loading. The release study showed sustained long-term release of VC and QC from the hydrogel scaffolds for over 20 days. Biocompatibility tests indicated that hydrogel scaffolds promoted osteoblast adhesion without cytotoxicity, with QC-containing scaffolds enhancing osteoblast growth. Antibacterial tests confirmed retained VC activity against methicillin-resistant Staphylococcus aureus (MRSA) in SF/CST. An experimental study assessed the efficacy of the hydrogel scaffolds in a MRSA-infected rat osteomyelitis model. Radiographic scores demonstrated a significant reduction for SF/CST-VC-PLGA/QC NPs compared to control, indicating reduced osteomyelitis effects. Macroscopic evaluations showed notable reductions in gross pathological effects for VC-containing groups. Histopathological assessments revealed significantly lower osteomyelitis scores and higher healing scores in the SF/CST-VC-PLGA/QC NPs, with reduced inflammatory cell infiltration and more organized connective tissue formation. In conclusion, SF/CST-VC-PLGA/QC NPs is an effective dual drug delivery system for osteomyelitis treatment, demonstrating significant antibacterial activity, enhanced bone regeneration, and reduced infection rate.

Laponite nanoclays for the sustained delivery of therapeutic proteins

Protein therapeutics hold immense promise for treating a wide array of diseases. However, their efficacy is often compromised by rapid degradation and clearance. The synthetic smectite clay Laponite emerges as a promising candidate for their sustained delivery. Despite its unique properties allow to load and release proteins mitigating burst release and extending their effects, precise control over Laponite-protein interactions remains challenging since it depends on a complex interplay of factors whose implication is not fully understood yet. The aim of this review article is to shed light on this issue, providing a comprehensive discussion of the factors influencing protein loading and release, including the physicochemical properties of the nanoclay and proteins, pH, dispersion buffer, clay/protein concentration and Laponite degradation. Furthermore, we thoroughly revise the array of bioactive proteins that have been delivered from formulations containing the nanoclay, highlighting Laponite-polymer nanocomposite hydrogels, a promising avenue currently under extensive investigation.

Nanoclay-Composite Hydrogels for Bone Tissue Engineering

Nanoclay-composite hydrogels represent a promising avenue for advancing bone tissue engineering. Traditional hydrogels face challenges in providing mechanical strength, biocompatibility, and bioactivity necessary for successful bone regeneration. The incorporation of nanoclay into hydrogel matrices offers a potential unique solution to these challenges. This review provides a comprehensive overview of the fabrication, physico-chemical/biological performance, and applications of nanoclay-composite hydrogels in bone tissue engineering. Various fabrication techniques, including in situ polymerization, physical blending, and 3D printing, are discussed. In vitro and in vivo studies evaluating biocompatibility and bioactivity have demonstrated the potential of these hydrogels for promoting cell adhesion, proliferation, and differentiation. Their applications in bone defect repair, osteochondral tissue engineering and drug delivery are also explored. Despite their potential in bone tissue engineering, nanoclay-composite hydrogels face challenges such as optimal dispersion, scalability, biocompatibility, long-term stability, regulatory approval, and integration with emerging technologies to achieve clinical application. Future research directions need to focus on refining fabrication techniques, enhancing understanding of biological interactions, and advancing towards clinical translation and commercialization. Overall, nanoclay-composite hydrogels offer exciting opportunities for improving bone regeneration strategies.

Clay-polymer nanocomposites for effective water treatment: opportunities, challenges, and future prospects

The metal intoxication and its associated adverse effects to humans have led to the research for development of water treatment technologies from pollution hazards. Therefore, development of cheaper water remediation technologies is more urgent than ever. Clays and clay minerals are naturally occurring, inexpensive, non-toxic materials possessing interesting chemical and physical properties. As a result of interesting surface properties, these have been developed as efficient absorbent in water remediation. Recently, clay-polymer nanocomposites have provided a cost-effective technological platform for removing contaminants from water. Covering research advancements from past 25 years, this review highlights the developments in clay-polymer nanocomposites and their advanced technical applications are evaluated with respect to the background and issues in remediation of toxic metals and organic compounds from water. The extensive analysis of literature survey of more than two decades suggests that future work need to highlight on advancement of green and cost-effective technologies. The development of understanding of the interaction and exchange between toxin and clay-polymer composites would provide new assembly methods of nanocomposites with functional molecules or nanomaterials need to be extended to increase the detection and extraction limit to parts per trillion.

Synthesis of Silane Functionalized LDH-Modified Nanopowders to Improve Compatibility and Enhance Corrosion Protection for Epoxy Coatings

Novel modified Zn-Al LDH/epoxy coatings are synthesized and applied to steel substrates, providing active corrosion protection and improved barrier properties. This protective coating is made by combining Epon 828 as a polymer matrix with modified layered-double-hydroxy (LDH) nanoparticles acting as corrosion inhibitor containers. To synthesize the coatings, nitrate was intercalated into Zn-Al-LDH layers through an aqueous co-precipitation method to obtain Zn-Al LDH-NO3, and decavanadate replaced nitrate within the LDH layers through an anion exchange process to obtain Zn-Al LDH-(V10O28)6-. The intercalated LDH was functionalized by silanization with (3-aminopropyl)triethoxysilane (APTES) to increase the compatibility of the LDH inhibitor nanocontainers with epoxy resin and produce a protective coating. To protect the mild steel substrate, functionalized LDH nanopowders were dispersed into the epoxy resin, mixed with a polyamide hardener (Epikure 3571), and applied and cured to the metal surface. Surface morphology, structure, and chemical composition were determined for the modified LDH nanopowders using scanning electron microscopy, energy-dispersive X-ray analysis, X-ray diffraction, infrared spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis. Corrosion protection of the coating system was studied using long-term immersion testing and potentiodynamic polarization studies in a 3.5 wt.% NaCl solution.

Engineered Clay-Polymer Composite for Biomedical Drug Delivery and Future Challenges: A Survey

Clay materials are widely used in drug delivery systems due to their unique characteristics. Montmorillonite is a major component of bentonite and it has a large surface area, better swelling capacity, and high adsorption capacity. The modification of natural bentonite could improve its sorption ability for new emerging applications. Recent advancements in the polymer-silicate composite have novel biomedical applications in drug delivery, tissue regeneration, wound healing, cancer therapy, enzyme immobilization, diagnostic and therapeutic devices, etc. Perspective view of the montmorillonite- polymer composite as a pharmaceutical carrier in drug delivery systems has been discussed in this review. Different types of modification of montmorillonite for the development of pharmaceutical formulations have also been documented. Many challenges in clay nanocomposite systems of polymer of natural/synthetic origin are yet to be explored in improving antimicrobial properties, mechanical strength, stimuli responsiveness, resistance to hydrolysis, etc. Drug interaction and binding capability, swelling of clay may be carried out for finding possible applications in monitoring delivery systems. Pharmaceutical properties of active drugs in the formulation could also be improved along with dissolution rate, solubility, and adsorption. The clay-incorporated polymeric drug delivery systems may be examined for a possible increase in swelling capacity and residence time after mucosal administration.

Effect of clay-zwitterionic interactions in controlling the viscoelastic properties in organomodified clays

Investigating the rheology of 2D materials such as clays is of growing interest in various applications as it dictates their flowability and structural stability. Clay minerals present unique rheological properties, especially when in suspension. This study explores the effect of functionalizing bentonite clay with betaines of variable carbon chain lengths on the rheological properties of clay slurries to analyze their interactions in suspension. The results show that these zwitterion-functionalized clays exhibit higher viscosity, storage moduli, and flow stresses due to the formation of three-dimensional networks and increased aggregation caused by intercalation. The structural properties of the clay slurries are also found to be pH-sensitive. Additionally, XRD and SEM analyses support the proposed intercalation of the clays. The findings suggest the potential application of small-chain betaine functionalized clays in engineering and energy applications. Overall, this study provides insight into predicting the stability and strength of functionalized clay suspensions.

Bubble Printing of Layered Silicates: Surface Chemistry Effects and Picomolar Förster Resonance Energy Transfer Sensing

The assembly of nanoparticles on surfaces in defined patterns has long been achieved via template-assisted methods that involve long deposition and drying steps and the need for molds or masks to obtain the desired patterns. Control over deposition of materials on surfaces via laser-directed microbubbles is a nascent technique that holds promise for rapid fabrication of devices down to the micrometer scale. However, the influence of surface chemistry on the resulting assembly using such approaches has so far not been studied. Herein, the printing of layered silicate nanoclays using a laser-directed microbubble was established. Significant differences in the macroscale structure of the printed patterns were observed for hydrophilic, pristine layered silicates compared to hydrophobic, modified layered silicates, which provided the first example of how the surface chemistry of such nanoscale objects results in changes in assembly with this approach. Furthermore, the ability of layered silicates to adsorb molecules at the interface was retained, which allowed the fabrication of proof-of-concept sensors based on Förster resonance energy transfer (FRET) from quantum dots embedded in the assemblies to bound dye molecules. The detection limit for Rhodamine 800 sensing via FRET was found to be on the order of 10-12 M, suggesting signal enhancement due to favorable interactions between the dye and nanoclay. This work sets the stage for future advances in the control of hierarchical assembly of nanoparticles by modification of surface chemistry while also demonstrating a quick and versatile approach to achieve ultrasensitive molecular sensors.

Tracking cellular uptake, intracellular trafficking and fate of nanoclay particles in human bone marrow stromal cells

Clay nanoparticles, in particular synthetic smectites, have generated interest in the field of tissue engineering and regenerative medicine due to their utility as cross-linkers for polymers in biomaterial design and as protein release modifiers for growth factor delivery. In addition, recent studies have suggested a direct influence on the osteogenic differentiation of responsive stem and progenitor cell populations. Relatively little is known however about the mechanisms underlying nanoclay bioactivity and in particular the cellular processes involved in nanoclay-stem cell interactions. In this study we employed confocal microscopy, inductively coupled plasma mass spectrometry and transmission electron microscopy to track the interactions between clay nanoparticles and human bone marrow stromal cells (hBMSCs). In particular we studied nanoparticle cellular uptake mechanisms and uptake kinetics, intracellular trafficking pathways and the fate of endocytosed nanoclay. We found that nanoclay particles present on the cell surface as μm-sized aggregates, enter hBMSCs through clathrin-mediated endocytosis, and their uptake kinetics follow a linear increase with time during the first week of nanoclay addition. The endocytosed particles were observed within the endosomal/lysosomal compartments and we found evidence for both intracellular degradation of nanoclay and exocytosis as well as an increase in autophagosomal activity. Inhibitor studies indicated that endocytosis was required for nanoclay upregulation of alkaline phosphatase activity but a similar dependency was not observed for autophagy. This study into the nature of nanoclay-stem cell interactions, in particular the intracellular processing of nanosilicate, may provide insights into the mechanisms underlying nanoclay bioactivity and inform the successful utilisation of clay nanoparticles in biomaterial design.

Advances in Structure Pharmaceutics from Discovery to Evaluation and Design

Drug delivery systems (DDSs) play an important role in delivering active pharmaceutical ingredients (APIs) to targeted sites with a predesigned release pattern. The chemical and biological properties of APIs and excipients have been extensively studied for their contribution to DDS quality and effectiveness; however, the structural characteristics of DDSs have not been adequately explored. Structure pharmaceutics involves the study of the structure of DDSs, especially the three-dimensional (3D) structures, and its interaction with the physiological and pathological structure of organisms, possibly influencing their release kinetics and targeting abilities. A systematic overview of the structures of a variety of dosage forms, such as tablets, granules, pellets, microspheres, powders, and nanoparticles, is presented. Moreover, the influence of structures on the release and targeting capability of DDSs has also been discussed, especially the in vitro and in vivo release correlation and the structure-based organ- and tumor-targeting capabilities of particles with different structures. Additionally, an in-depth discussion is provided regarding the application of structural strategies in the DDSs design and evaluation. Furthermore, some of the most frequently used characterization techniques in structure pharmaceutics are briefly described along with their potential future applications.

Clay nanosheets simultaneously intercalated and stabilized by PEGylated chitosan as drug delivery vehicles for cancer chemotherapy

Montmorillonite (MMT) has been frequently utilized as drug vehicles due to its high specific surface area, excellent cation exchange capacity and biocompatibility. However, the significant flocculation of MMT under physiological condition restricted its application to drug delivery. To conquer this problem, the graft-type PEGylated chitosan (PEG-CS) adducts were synthesized as intercalator to stabilize MMT dispersion. Through electrostatic attraction between the chitosan and MMT, the PEG-CS adducts were adsorbed on MMT surfaces and intercalated into MMT. The resulting PEG-CS/MMT nanosheets possessed PEG-rich surfaces, thus showing outstanding dispersion in serum-containing environment. Moreover, the physicochemical characterization revealed that the increased mass ratio of PEG-CS to MMT led to the microstructure transition of PEG-CS/MMT nanosheets from multilayered to exfoliated structure. Interestingly, the PEG-CS/MMT nanosheets with mass ratio of 8.0 in freeze-dried state exhibited a hierarchical lamellar structure organized by the intercalated MMT bundles and unintercalated PEG-CS domains. Notably, the multilayered PEG-CS/MMT nanosheets showed the capability of loading doxorubicin (DOX) superior to the exfoliated counterparts. Importantly, the DOX@PEG-CS/MMT nanosheets endocytosed by TRAMP-C1 cells liberated the drug progressively within acidic organelles, thereby eliciting cell apoptosis. This work provides a new strategy of achieving the controllable dispersion stability of MMT nanoclays towards application potentials in drug delivery.

Influence of halloysite nanotubes on the efficiency of Asparaginase against mice Ehrlich solid carcinoma

Herein, the impact of the halloysite nanotubes to suppress the side effects of Asparaginase (ANase) cellular proliferation was investigated. Methods: A total of 100 adult male mice was employed. These mice were divided into four equal groups; Group 1 (control), Group 2 (ESC group) of a single dose of 0.15 ml Ehrlich cells (2 × 106) intraperitoneal infusion(IP), Group 3 (ESC + ANase group) received six doses equal treatments of Intratumoral (IT) 0.07 ml Aspragnase (7 mg/kg) over two weeks. For two weeks, Group 4 (ESC + ASNase + HNTs) received an IT administration of 0.07 ml Asparaginase stocked on Halloysite nanotubes (HNTs) (30 mg/kg) three times per week. A blood specimen was collected, and the liver was removed to be investigated histologically. Results: TEM measurements for the Halloysite nanoclay showed their tubular cylindrical shape with a mean diameter of 50 nm and an average length of 1 μm, whereas The X-ray diffraction pattern of the Halloysite nanoclay showed their characteristic peaks. ESC increases the serum levels of aspartate aminotransferase, alanine aminotransferase, alkaline phosphatase, and bilirubin than control and other groups, even as albumin and total protein were decreasing. After using Halloysite Nanotube, the rates of these variables were enhanced up to 75%. The hepatocytes histological studies showed protection against Ehrlich Solid carcinoma-induced degenerative, necrotic, and inflammatory changes up to 70%. In conclusion, halloysite nanotubes have demonstrated effective removal of Ehrlich solid carcinoma in mice using an ASNase delivery system. It promoted the ASNase to inhibit the adverse effect of ANase's on the liver and remove the tumour cells.

Cyclodextrin mediated controlled release of edaravone from pH-responsive sodium alginate and chitosan based nanocomposites

The objective of the study is to enhance the aqueous solubility and stability of edaravone, a free radical scavenger drug. Inclusion complexes of edaravone with β-cyclodextrin were prepared by microwave irradiation and physical mixture method and confirmation of inclusion complexes were investigated by different analytical techniques such as FT-IR, ROESY, DSC, and ¹H NMR. pH-sensitive nanocomposites based on chitosan (CH), sodium alginate (ALG), and bentonite (BN) were synthesized. To get the maximum percentage swelling different reaction parameters that are responsible for the synthesis of the nanocomposite were optimized and characterized by various techniques such as FESEM, EDS, XRD, and FT-IR. To regulate the drug delivery, inclusion complexes were directly loaded into the CH/ALG hydrogel, and CH/ALG/BN nanocomposite and release studies were evaluated at different pH environments. The solubility of edaravone was investigated by phase solubility and the graph results in a typical A_L type behavior, suggesting the formation of a 1:1 stoichiometry inclusion complex. The comparative evaluation of drug release was explored by kinetic models. Controlled release of drug was achieved from CH/ALG/BN nanocomposite in comparison to CH/ALG hydrogel. The exploratory kinetic investigation revealed that β-CD plays a critical role in the drug release process by influencing polymer relaxation, resulting in slow release.

Exfoliated bentonite/alginate nanocomposite hydrogel enhances intestinal delivery of probiotics by resistance to gastric pH and on-demand disintegration

In this study, we developed Lactobacillus rhamnosus GG (LGG)-encapsulating exfoliated bentonite/alginate nanocomposite hydrogels for protecting probiotics by delaying gastric fluid penetration into the nanocomposite and their on-demand release in the intestine. The pore size of the bentonite/alginate nanocomposite hydrogels (BA15) was two-fold smaller than that of alginate hydrogel (BA00). Following gastric pH challenge, the survival of LGG in BA15 decreased by only 1.43 log CFU/g as compared to the 6.25 log CFU/g decrease in alginate (BA00). Further, the internal pH of BA15 decreased more gradually than that of BA00. After oral administration in mice, BA15 maintained shape integrity during gastric passage, followed by appropriate disintegration within the target intestinal area. Additionally, a fecal recovery experiment in mice showed that the viable counts of LGG in BA15 were six-fold higher than those in BA00. The findings suggest the exfoliated bentonite/alginate nanocomposite hydrogel as a promising platform for intestinal delivery of probiotics.

3D Printing of Alginate-Natural Clay Hydrogel-Based Nanocomposites

Biocompatibility, biodegradability, shear tinning behavior, quick gelation and an easy crosslinking process makes alginate one of the most studied polysaccharides in the field of regenerative medicine. The main purpose of this study was to obtain tissue-like materials suitable for use in bone regeneration. In this respect, alginate and several types of clay were investigated as components of 3D-printing, nanocomposite inks. Using the extrusion-based nozzle, the nanocomposites inks were printed to obtain 3D multilayered scaffolds. To observe the behavior induced by each type of clay on alginate-based inks, rheology studies were performed on composite inks. The structure of the nanocomposites samples was examined using Fourier Transform Infrared Spectrometry and X-ray Diffraction (XRD), while the morphology of the 3D-printed scaffolds was evaluated using Electron Microscopy (SEM, TEM) and Micro-Computed Tomography (Micro-CT). The swelling and dissolvability of each composite scaffold in phosfate buffer solution were followed as function of time. Biological studies indicated that the cells grew in the presence of the alginate sample containing unmodified clay, and were able to proliferate and generate calcium deposits in MG-63 cells in the absence of specific signaling molecules. This study provides novel information on potential manufacturing methods for obtaining nanocomposite hydrogels suitable for 3D printing processes, as well as valuable information on the clay type selection for enabling accurate 3D-printed constructs. Moreover, this study constitutes the first comprehensive report related to the screening of several natural clays for the additive manufacturing of 3D constructs designed for bone reconstruction therapy.

Introducing a flexible drug delivery system based on poly(glycerol sebacate)-urethane and its nanocomposite: potential application in the prevention and treatment of oral diseases

In this study, a novel biopolymer based on poly(glycerol sebacic)-urethane (PGS-U) and its nanocomposites containing Cloisite@30B were synthesized by facile approach in which the crosslinking was created by aliphatic hexamethylene diisocyanate (HDI) at room temperature and 80 °C. Moreover, metronidazole and tetracycline drugs were selected as target drugs and loaded into PGSU based nanocomposites. A uniform and continuous microstructure with smooth surface is observed in the case of pristine PGS-U sample. The continuity of microstructure is observed in the case of all bionanocomposites. XRD result confirmed an intercalated morphology for PGSU containing 5 wt% of clay nanoparticles with a d-spacing 3.4 nm. The increment of nanoclay content up to 5%, the ultimate tensile stress and elastic modulus were obtained nearly 0.32 and 0.83 MPa, which the latter was more than eight-fold than that of pristine PGS-U. A sustained release for both dugs was observed by 200 h. The slowest and controlled drug release rate was determined in the case of PGSU containing 5 wt% clay and cured at 80 °C. A non-Fickian diffusion can be concluded in the case of tetracycline release via PGS-U/nanoclay bionanocomposites, while a Fickian process was detected in the case of metronidazole release by PGS-U/nanoclay bionanocomposites. As a result, the designed scaffold showed high flexibility, which makes it an appropriate option for utilization in the treatment of periodontal disease.

Montmorillonite colloid plates with adsorbed cytochrome c: in vitro cytotoxic effect on colon cancer cell culture

Background

The apoptosis (a cascade of biochemical reactions leading to suicide of damaged biological cells) is blocked in the cancer cells because of impossibility of cytochrome c (cytC) go out from the mitochondria. However, the apoptosis can be started by introducing of exogenous cytC into cytoplasm using colloid particles as a protein carrier due to ability of the cancer cells to phagocytize extracellular particles with submicron size.

Results

The clay mineral montmorillonite (MM) were used to prepare aqueous suspension of protein/mineral composite particles by electrostatic adsorption of the positively charged cytC globules on the negatively charged MM colloid plates, and then added to colon cancel culture. The results shows out that separately cytC and MM have no effect but the composite cytC-MM particles kill 95% of the cancer cells after 96 h treatment using equine cytC which is 97% structurally identical with the human cytC. To reach this high cytotoxicity we have formulated requirements to: (a) bare colloid particles (electric charge, form and size), (b) conditions for protein adsorption (concentrations, pH, ionic strength), and (c) suspension with the composite particles (positive total charge and optimal concentration). Due to satisfying these requirements we have reached cytotoxicity which is 1/3 higher than the reached by other authors using different artificial particles. The cytotoxicity rapidly increases with concentration of the cytC-MM particles but further it shows tendency to saturation.

Methods

The optimal pH 6.5 and the 10:3 mg/mg cytC/MM concentration ratio at adsorption were found out by employing computer (protein electrostatics) and physicochemical methods (microelectrophoresis and colloid electrooptics) to prepare cytC-MM suspension. The anticancer capability of cytC-MM nanoplates were investigated using cell culture of metastasizing colon cancer.

Conclusion

The in vitro experiments with colon cancer cell culture disclose that cytC-MM composite particles have potential for application in anticancer therapy of superficial neoplasms of the skin and the alimentary system (mouth cavity, esophagus, stomach, jejunum and colon).

Graphic abstract

Swelling layered minerals applications: A solid state NMR overview

Swelling layered clay minerals form an important sub-group of the phyllosilicate family. They are characterized by their ability to expand or contract in the presence or absence of water. This property makes them useful for a variety of applications, ranging from environmental technologies to heterogeneous catalysis, and including pharmaceutical and industrial applications. Solid State Nuclear Magnetic Resonance (SS-NMR) has been extensively applied in the characterization of these materials, providing useful information on their dynamics and structure that is inaccessible using other characterization methods such as X-ray diffraction. In this review, we present the key contributions of SS-NMR to the understanding of the mechanisms that govern some of the main applications associated to swelling clay minerals. The article is divided in two parts. The first part presents SS-NMR conventional applications to layered clay minerals, while the second part comprises an in-depth review of the information that SS-NMR can provide about the different properties of swelling layered clay minerals.

Recent advances in the design of inorganic and nano-clay particles for the treatment of brain disorders

Inorganic materials, in particular nanoclays and silica nanoparticles, have attracted enormous attention due to their versatile and tuneable properties, making them ideal candidates for a wide range of biomedical applications, such as drug delivery. This review aims at overviewing recent developments of inorganic nanoparticles (like porous or mesoporous silica particles) and different nano-clay materials (like montmorillonite, laponites or halloysite nanotubes) employed for overcoming the blood brain barrier (BBB) in the treatment and therapy of major brain diseases such as Alzheimer's, Parkinson's, glioma or amyotrophic lateral sclerosis. Recent strategies of crossing the BBB through invasive and not invasive administration routes by using different types of nanoparticles compared to nano-clays and inorganic particles are overviewed.

Assessment of Naturally Sourced Mineral Clays for the 3D Printing of Biopolymer-Based Nanocomposite Inks

The present study investigated the possibility of obtaining 3D printed composite constructs using biomaterial-based nanocomposite inks. The biopolymeric matrix consisted of methacrylated gelatin (GelMA). Several types of nanoclay were added as the inorganic component. Our aim was to investigate the influence of clay type on the rheological behavior of ink formulations and to determine the morphological and structural properties of the resulting crosslinked hydrogel-based nanomaterials. Moreover, through the inclusion of nanoclays, our goal was to improve the printability and shape fidelity of nanocomposite scaffolds. The viscosity of all ink formulations was greater in the presence of inorganic nanoparticles as shear thinning occurred with increased shear rate. Hydrogel nanocomposites presented predominantly elastic rather than viscous behavior as the materials were crosslinked which led to improved mechanical properties. The inclusion of nanoclays in the biopolymeric matrix limited hydrogel swelling due the physical barrier effect but also because of the supplementary crosslinks induced by the clay layers. The distribution of inorganic filler within the GelMA-based hydrogels led to higher porosities as a consequence of their interaction with the biopolymeric ink. The present study could be useful for the development of soft nanomaterials foreseen for the additive manufacturing of customized implants for tissue engineering.

A New Long-Term Composite Drug Delivery System Based on Thermo-Responsive Hydrogel and Nanoclay

Several problems and limitations faced in the treatment of many diseases can be overcome by using controlled drug delivery systems (DDS), where the active compound is transported to the target site, minimizing undesirable side effects. In situ-forming hydrogels that can be injected as viscous liquids and jellify under physiological conditions and biocompatible clay nanoparticles have been used in DDS development. In this work, polymer-clay composites based on Pluronics (F127 and F68) and nanoclays were developed, aiming at a biocompatible and injectable system for long-term controlled delivery of methylene blue (MB) as a model drug. MB release from the systems produced was carried out at 37 °C in a pH 7.4 medium. The Pluronic formulation selected (F127/F68 18/2 wt.%) displayed a sol/gel transition at approx. 30 °C, needing a 2.5 N force to be injected at 25 °C. The addition of 2 wt.% of Na116 clay decreased the sol/gel transition to 28 °C and significantly enhanced its viscoelastic modulus. The most suitable DDS for long-term application was the Na116-MB hybrid from which, after 15 days, only 3% of the encapsulated MB was released. The system developed in this work proved to be injectable, with a long-term drug delivery profile up to 45 days.

Nanocontainers for drug delivery systems: A review of Halloysite nanotubes and their properties

Halloysite nanotubes (HNTs) are known as inexpensive and available nanomaterials that are rich in functionality, environmentally benign, and also safe and easy to process. As well, good particle size (i.e. nanoscale) and perfect tubular microstructures of these materials make them to be used extensively as drug carriers. Also, the unique physical and chemical properties of their internal and external surfaces are the greatest priority for the drug encapsulation controlling and releasing. In this review, is tried to emphasis on the main properties of HNTs to manage and develop effective drug delivery tools in the biomedical and pharmaceutical fields.

Effect of LDHs and Other Clays on Polymer Composite in Adsorptive Removal of Contaminants: A Review

Recently, the development of a unique class of layered silicate nanomaterials has attracted considerable interest for treatment of wastewater. Clean water is an essential commodity for healthier life, agriculture and a safe environment at large. Layered double hydroxides (LDHs) and other clay hybrids are emerging as potential nanostructured adsorbents for water purification. These LDH hybrids are referred to as hydrotalcite-based materials or anionic clays and promising multifunctional two-dimensional (2D) nanomaterials. They are used in many applications including photocatalysis, energy storage, nanocomposites, adsorption, diffusion and water purification. The adsorption and diffusion capacities of various toxic contaminants heavy metal ions and dyes on different unmodified and modified LDH-samples are discussed comparatively with other types of nanoclays acting as adsorbents. This review focuses on the preparation methods, comparison of adsorption and diffusion capacities of LDH-hybrids and other nanoclay materials for the treatment of various contaminants such as heavy metal ions and dyes.

Natural Inorganic Ingredients in Wound Healing

Background:

One of the major clinical challenges is to achieve a rapid and efficient treatment of complex chronic wounds. Nowadays, most wound dressings currently available are unable to find a solution the challenges of resistance to bacterial infection, protein adsorption and increased levels of exudates. Natural inorganic ingredients (clay minerals, metal cations, zeolites, etc) could be the key to solve the problem satisfactorily. Some of these materials have shown biocompatibility and ability to enhance cell adhesion, proliferation and cellular differentiation and uptake. Besides, some natural inorganic ingredients effectively retain drugs, allowing the design of drug delivery matrices.

Objective:

possibilities of natural inorganic ingredients in wound healing treatments have been reviewed, the following sections have been included: 1. Introduction 2. Functions of Inorganic Ingredients in wound healing 2.1. Antimicrobial effects 2.2. Hemostatic effects 3. Clay minerals for wound healing 3.1. Clay minerals 3.2. Clay mineral semisolid formulations 3.3. Clay/polymer composites and nanocomposites 3.4. Clay minerals in wound dressings 4. Other inorganic materials for wound healing 4.1. Zeolites 4.2. Silica and other silicates 4.3. Other minerals 4.4. Transition metals 5. Conclusion

Conclusion:

inorganic ingredients possess useful features in the development of chronic wounds advanced treatments. They improve physical (mechanical resistance and water vapor transmission), chemical (release of drugs, hemostasis and/or adsorption of exudates and moisture) and biological (antimicrobial effects and improvement of healing) properties of wound dressings. In summary, inorganic ingredients have proved to be a promising and easily accessible products in the treatment of wounds and, more importantly, chronic wounds.

Ciprofloxacin-intercalated layered double hydroxide-in-hybrid films as composite dressings for controlled antimicrobial topical delivery

Films based on biopolymers and loaded with antimicrobial agents are convenient pharmaceutical dosage forms for topical application. Inorganic carriers loaded with these agents lead to composite materials, which combined with polymers produce further functionality. Here, hybrid composite films based on layered double hydroxide (LDH) and hyaluronan (HS) as ciprofloxacin (Cip) delivery systems were studied as an alternative for prophylaxis and treatment of opportunistic infections in wounds. Cip-intercalated Zn-Al LDH (LDH-Cip), with high drug loading and crystallinity, were obtained by a precipitation at variable pH method, and then included in a HS dispersion for obtaining the hybrid composite films by solvent casting. Physicochemical characterization of films showed that a composite material where the HS acted as matrix and LDH-Cip aggregates acted as filler were obtained. LDH-Cip were uniformly dispersed along the (LDH-Cip)/HS films, which exhibited roughness in their surface, increasing their swelling capacity in PBS pH = 5.8. Controlled releases of Cip toward PBS at pH = 5.8 and 7.4 were obtained, and the best fits for the release profiles were found with Higuchi and Korsmeyer-Peppas models, respectively. (LDH-Cip)/HS films exhibited antimicrobial activity against S. aureus. These films would then provide sustained release of Cip after topical administration, maintaining a suitable level of antibacterial activity, combined with the wound healing properties of the HS. The interesting properties shown by the (LDH-Cip)/HS films make them a promising alternative for application in skin wounds.

Bisphosphonate nanoclay edge-site interactions facilitate hydrogel self-assembly and sustained growth factor localization

Nanoclays have generated interest in biomaterial design for their ability to enhance the mechanics of polymeric materials and impart biological function. As well as their utility as physical cross-linkers, clays have been explored for sustained localization of biomolecules to promote in vivo tissue regeneration. To date, both biomolecule-clay and polymer-clay nanocomposite strategies have utilised the negatively charged clay particle surface. As such, biomolecule-clay and polymer-clay interactions are set in competition, potentially limiting the functional enhancements achieved. Here, we apply specific bisphosphonate interactions with the positively charged clay particle edge to develop self-assembling hydrogels and functionalized clay nanoparticles with preserved surface exchange capacity. Low concentrations of nanoclay are applied to cross-link hyaluronic acid polymers derivatised with a pendant bisphosphonate to generate hydrogels with enhanced mechanical properties and preserved protein binding able to sustain, for over six weeks in vivo, the localized activity of the clinically licensed growth factor BMP-2.

Nanoclays have been used in composites and for drug delivery but have suffered from a trade-off in properties when used for both. Here the authors report on the use of bisphosphonate interactions with nanoclay edges to made drug loaded composites without compromising materials properties or drug loading.

Recent developments in the use of organic-inorganic nanohybrids for drug delivery

Organic-inorganic nanohybrid (OINH) structures providing a versatile platform for drug delivery with improved characteristics are an area which has gained recent attention. Much effort has been taken to develop these structures to provide a viable treatment options for much alarming diseases such as cancer, bone destruction, neurological disorders, and so on. This review focuses on current work carried out in producing different types of hybrid drug carriers identifying their properties, fabrication techniques, and areas where they have been applied. A brief introduction on understating the requirement for blending organic-inorganic components into a nanohybrid drug carrier is followed with an elaboration given about the different types of OINHs developed currently highlighting their properties and applications. Then, different fabrication techniques are discussed given attention to surface functionalization, one-pot synthesis, wrapping, and electrospinning methods. Finally, it is concluded by briefing the challenges that are remaining to be addressed to obtain multipurpose nanohybrid drug carriers with wider applicability. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies.

Two-dimensional nanomaterials: fascinating materials in biomedical field

Due to their high anisotropy and chemical functions, two-dimensional (2D) nanomaterials have attracted increasing interest and attention from various scientific fields, including functional electronics, catalysis, supercapacitors, batteries and energy materials. In the biomedical field, 2D nanomaterials have made significant contributions to the field of nanomedicine, especially in drug/gene delivery systems, multimodal imaging, biosensing, antimicrobial agents and tissue engineering. 2D nanomaterials such as graphene/graphene oxide (GO)/reduced graphene oxide (rGO), silicate clays, layered double hydroxides (LDHs), transition metal dichalcogenides (TMDs), transition metal oxides (TMOs), black phosphorus (BP), graphitic carbon nitride (g-C₃N₄), hexagonal boron nitride (h-BN), antimonene (AM), boron nanosheets (B NSs) and tin telluride nanosheets (SnTe NSs) possess excellent physical, chemical, optical and biological properties due to their uniform shapes, high surface-to-volume ratios and surface charge. In this review, we first introduce the properties, structures and synthetic strategies of different configurations of 2D nanomaterials. Recent advances and paradigms of 2D nanomaterials in a variety of biomedical applications, ranging from drug delivery, cancer treatment, bioimaging and tissue engineering to biosensing are discussed afterwards. In the final part, we foresee the development prospects and challenges of 2D nanomaterials after summarizing the research status of ultrathin 2D nanomaterials.

Synthesis of promising nanocomposites from an antitumer and biologically active heterocyclic compound uploaded by clay and chitosan polymers

The innovative nanocomposites (NCs) of antibacterial and antitumor 2-amino-5-S-benzyl-1, 3, 4-thiadiazole (ABMT): binary (NC₁): ABMT-clay as well as the ternary (NC₂): ABMT-clay-chitosan have been prepared following the top-down approach method. The ABMT molecules have been efficiently uploaded on the inorganic polymer potassium montmorlinite clay polymer (MMT). The NC is homogenously dispersed in the aqueous solutions without crystallization of ABMT. However, the dispersity of the small particle size and the crystallinity of NC₁ is greatly enhanced in the presence of the biopolymer chitosan. The nanocomposites showed good non linear optical activity with suitable band gaps indicated the electron confinement in the NC. The loading and entrapment efficiency of ABMT onto MMT reached 89.3% in NC₁ during 6 h of contact time with the aqueous solution of pH 6.8. The enhanced redox characteristics of NC₁ relative to that of MMT suggested the better biological (antibacterial and antitumor) activity of NC₁. Chitosan enhanced the redox and the optical properties of NC₁ and its ability to undergo intercharge transfer to any acceptor sites. Hence, chitosan may added synergestic electron donation and, hence antitumor activity to the binary NC₁.

Development of pH-responsive organic-inorganic hybrid nanocomposites as an effective oral delivery system of protein drugs

This research aimed to develop a pH-responsive organic-inorganic hybrid nanocomposite as an effective oral delivery system for protein drugs. Three different nanocomposites were prepared by using bovine serum albumin (BSA) as a model protein. A nanocomplex of BSA with 3-aminopropyl functionalized magnesium phyllosilicate (AC-BSA) was obtained via the spontaneous co-assembly and then sequentially coated with glycol-chitosan (GAC-BSA) and the pH sensitive polymer, Eudragit®L100-55 (EGAC-BSA). These organic-inorganic hybrid nanocomposites exhibited high entrapment efficiency (86-99%) and their structural characteristics were confirmed by using energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, and circular dichroism analysis, indicating that the secondary structure of BSA was well retained in the nanocomposites. At pH 1.2, AC-BSA achieved rapid drug release of about 80% within 2 h, while GAC-BSA and EGAC-BSA exhibited slow drug release of 30% and 15%, respectively, indicating that the surface-coated nanocomposites were more stable in the gastric condition. Furthermore, the conformational stability of BSA entrapped in EGAC-BSA was well retained in the presence of proteolytic enzymes, suggesting that EGAC-BSA should be effective in protecting the protein against gastrointestinal harsh environment. Compared to free BSA, all of tested nanocomposites demonstrated 2.1-3.8-fold higher cellular uptake in Caco-2 cells. Furthermore, energy-dependent endocytosis and paracellular pathway contributed to the cellular transport of nanoparticles. After oral administration in rats, EGAC-BSA significantly enhanced the intestinal permeation of BSA compared to free BSA. In conclusion, EGAC-BSA appears to be promising as an effective oral delivery system for proteins with enhanced intestinal absorption.

Curcumin ameliorates the targeted delivery of methotrexate intercalated montmorillonite clay to cancer cells

Montmorillonite Clay (MMT) is aimed to develop as an orally administrable drug delivery vehicle with enhanced efficacy. Aiming to enhance the therapeutic index of methotrexate, curcumin is concomitantly used with methotrexate in the present study. Being folate antagonist in nature, methotrexate is internalized into cells by folate receptor (FR); which is over-expressed in certain human cancer cells such as cervical carcinoma cells (HeLa). Firstly, montmorillonite Clay (MMT) is organically modified (OMMT) with cetyl trimethyl ammonium bromide (CTAB) and used to intercalate curcumin and methotrexate separately, designated as OMMT-Cur and OMMT-MTX, respectively. XRD pattern demonstrated successful intercalation of therapeutics and an increase in clay interlayer distance facilitated by CTAB. The dissolution kinetics of methotrexate follows Higuchi model for both Simulated Gastric Fluid (SGF) and Simulated Intestinal Fluid (SIF), while the release kinetics for curcumin fitted into Higuchi model for SGF and Hixson-Crowell model for SIF, respectively. OMMT-MTX are able to discriminate FR-positive HeLa cells from FR-negative breast cancer cells (MCF7); irrespective of alike cellular phenotypes. Further, the pre-treatment of HeLa cells with curcumin improves its sensitivity towards methotrexate causing a greater killing of the Hela cells. Together, the results propose the concomitant use of curcumin and methotrexate for successfully targeting highly invasive FR-positive carcinomas by means of folate receptor using MMTs.

Modified montmorillonite nanolayers for nano-encapsulation of biomolecules

Vitamin B6 was nano-encapsulated in between modified montmorillonite nanolayers. Results indicated that electrostatic interaction forces dominate the adsorption onto different sites of the nanolayers. The successful nano-encapsulation was achieved when the interlayers spaces of the nanolayer were saturated with cations of Na+ or Ca2+ resulted in adsorption of vitamin B6 in between nanosheets. At these conditions, controlled pH-responsive desorption properties were detected and vitamin B6 was released mostly from the interlayer spaces. The presented modified montmorillonite could be used for nanoencapsulation of drugs and biomolecules with high protection of carrying materials during storage and even through the digestion process.

Nanocomposite Hydrogels: Advances in Nanofillers Used for Nanomedicine

The ongoing progress in the development of hydrogel technology has led to the emergence of materials with unique features and applications in medicine. The innovations behind the invention of nanocomposite hydrogels include new approaches towards synthesizing and modifying the hydrogels using diverse nanofillers synergistically with conventional polymeric hydrogel matrices. The present review focuses on the unique features of various important nanofillers used to develop nanocomposite hydrogels and the ongoing development of newly hydrogel systems designed using these nanofillers. This article gives an insight in the advancement of nanocomposite hydrogels for nanomedicine.

Nanocomposite thin films for triggerable drug delivery

INTRODUCTION

Traditional drug release systems normally rely on a passive delivery of therapeutic compounds, which can be partially programmed, prior to injection or implantation, through variations in the material composition. With this strategy, the drug release kinetics cannot be remotely modified and thus adapted to changing therapeutic needs. To overcome this issue, drug delivery systems able to respond to external stimuli are highly desirable, as they allow a high level of temporal and spatial control over drug release kinetics, in an operator-dependent fashion.

AREAS COVERED

On-demand drug delivery systems actually represent a frontier in this field and are attracting an increasing interest at both research and industrial level. Stimuli-responsive thin films, enabled by nanofillers, hold a tremendous potential in the field of triggerable drug delivery systems. The inclusion of responsive elements in homogeneous or heterogeneous thin film-shaped polymeric matrices strengthens and/or adds intriguing properties to conventional (bare) materials in film shape.

EXPERT OPINION

This Expert Opinion review aims to discuss the approaches currently pursued to achieve an effective on-demand drug delivery, through nanocomposite thin films. Different triggering mechanisms allowing a fine control on drug delivery are described, together with current challenges and possible future applications in therapy and surgery.

Intercalation of metformin into montmorillonite

Metformin hydrochloride is spontaneously intercalated into layered silicates like montmorillonite by an ion-exchange mechanism, producing a promising controlled release system.

Structural and morphological aspects of (fluoro)quinolone delivery by layered double hydroxide nanoparticles

Synthesis conditions affect the composition and morphology of LDH-based delivery systems loaded with nalidixic acid and, consequently, their biopharmaceutical behavior.

Microparticles to enhance delivery of drugs and growth factors into wound sites

Microparticles with controlled size and morphology are of significant interest in the field of drug delivery. Although advanced nanoparticles have been the object of a substantial number of reviews, fewer have focused on microparticles, especially for the delivery of drugs and growth factors to the wound site. Microparticles show distinct advantages, including ease of production and characterization, extended release properties, high drug loading and little concern about the toxicity as compared with the nanosized systems. This review presents an introduction to the pathophysiology of wound healing and provides an overview of some of the recent advances in microparticle-based drugs and growth factors delivery to wound sites.

Interaction of curcumin in a drug delivery system including a composite with poly(lactic-co-glycolic acid) and montmorillonite: a density functional theory and molecular dynamics study

Curcumin as an anticancer agent can be delivered with a composite including poly(lactic-co-glycolic acid) and montmorillonite.

Polyglycolide–montmorillonite as a novel nanocomposite platform for biosensing applications

In catalytic biosensors, the immobilization of biomolecules in a suitable matrix is one of the vital parameters for obtaining improved systems.