Hybrid magnetic CoFe2O4@γ-Fe2O3@CTAB nanocomposites as efficient and reusable adsorbents for Remazol Brilliant Blue R dye

The main goal of the present survey was to elaborate, characterize and evaluate the efficiency of ferrite-based nanoparticles modified with cetyltrimethylammonium bromide (CTAB) as potential magnetic nanoadsorbents to remove Remazol Brilliant Blue R (RBBR) from water. It is proposed an innovative nanomaterial architecture based on highly magnetic and chemically stable core@shell nanoparticles covered by an adsorptive surface layer of CTAB (CoFe2O4@γ-Fe2O3@CTAB). Samples of two different mean sizes (7.5 and 14.6 nm) were synthesized using a hydrothermal coprecipitation followed by surface treatment and functionalization. Batch tests were performed to evaluate the influence of contact time, temperature, pH, shaking rate, presence of interferents and mean size on the performance of the proposed nanomaterials. The kinetics of the adsorption process followed the pseudo-second-order model with an equilibrium time of 20 min. The adsorption capacity was estimated by the Langmuir isotherm model and was found to be 56.3 mg/g (smaller size) and 45.6 mg/g (larger size) at pH = 3 and a shaking rate of 400 rpm. The process was spontaneous, exothermic, and showed increased randomness. Sulphate ions negatively impacted the removal of RBBR. The best performance of the nanoadsorbent based on smaller mean sizes can be correlated to its larger surface area. Regeneration and readsorption tests showed that the nanoadsorbents retain more than 80% of their original removal capacity, therefore they can be effectively recycled and reused.

Adsorption of Cr6+ ion using activated Pisum sativum peels-triethylenetetramine

The adsorption of Cr6+ ions from water-soluble solution onto activated pea peels (PPs) embellished with triethylenetetramine (TETA) was studied. The synthesized activated TETA-PP biosorbent was further characterized by SEM together with EDX, FTIR and BET to determine the morphology and elementary composition, functional groups (FGs) present and the biosorbent surface area. The confiscation of Cr6+ ions to activated TETA-PP biosorbent was observed to be pH-reliant, with optimum removal noticed at pH 1.6 (99%). Cr6+ ion adsorption to activated TETA-PP biosorbent was well defined using the Langmuir (LNR) and the pseudo-second-order (PSO) models, with a determined biosorption capacity of 312.50 mg/g. Also, it was found that the activated TETA-PP biosorbent can be restored up to six regeneration cycles for the sequestration of Cr6+ ions in this study. In comparison with other biosorbents, it was found that this biosorbent was a cost-effective and resourceful agro-waste for the Cr6+ ion confiscation. The possible mechanism of Cr6+ to the biosorbent was by electrostatic attraction following the surface protonation of the activated TETA-PP biosorbent sites.

Adsorption performance and mechanism of cationic and anionic dyes by KOH activated biochar derived from medical waste pyrolysis

The massive generation of medical waste (MW) results in a series of environmental, social, and ecological problems. Pyrolysis is one such approach that has attracted more attention because of the production of value-added products with lesser environmental risk. In this study, the activated biochar (ABC600) was obtained from MW pyrolysis and activated with KOH. The adsorption mechanism of activated biochar on cationic (methylene blue) and anionic (reactive yellow) dyes were studied. The physicochemical characterization of biochar showed that increasing pyrolysis temperature and KOH activation resulted in increased surface area, a rough surface with a clear porous structure, and sufficient functional groups. MB and RYD-145 adsorption on ABC600 was more consistent with Langmuir isotherm (R² ≥ 0.996) and pseudo-second-order kinetics (R² ≥ 0.998), indicating chemisorption with monolayer characteristics. The Langmuir model fitting demonstrated that MB and RYD-145 had maximum uptake capacities of 922.2 and 343.4 mg⋅g^-1. The thermodynamics study of both dyes showed a positive change in enthalpy (ΔH°) and entropy (ΔS°), revealing the endothermic adsorption behavior and randomness in dye molecule arrangement on activated-biochar/solution surface. The activated biochar has excellent adsorption potential for cationic and anionic dyes; hence, it can be considered an economical and efficient adsorbent.

Carbide-derived carbon as an extraordinary material for the removal of chromium from an aqueous solution

In the present work, the adsorptive removal of chromium (Cr) from water by carbide-derived carbon (CDC) was investigated. The morphology and structure of the CDC were characterized by using FTIR, SEM, TEM, XRD, and N₂ adsorption-desorption measurements. The effect of adsorption parameters including contact time, initial Cr concentration, temperature, initial solution pH, and CDC dosage was examined on the removal of Cr ions. The kinetic analysis revealed that the experimental data on the removal of Cr ions on CDC is well correlated with the pseudo-second order kinetic model (with R² > 0.999), while the equilibrium data were fitted by the Redlich-Peterson isotherm model (with R² > 0.992). The Langmuir and Sips models were also in good compliance with the equilibrium data, indicating a monolayer coverage of Cr ions onto the CDC surface with some heterogeneous active adsorption sites. The CDC revealed a notable Langmuir adsorption capacity of 159.1 mg/g for Cr ions at pH 6 and room temperature. The thermodynamic analysis illustrated that the Cr ions elimination by CDC is a feasible adsorption process and endothermic in nature. After five adsorption/desorption cycles, less than 18% reduction in the adsorption capacity was obtained indicating the stability and reusability of the CDC. Moreover, the CDC demonstrated an excellent potential in removing the Cr ions from real brackish water. According to the adsorption data, both physical and chemical adsorption processes occurred, and the adsorption was mainly controlled by electrostatic interactions with a possible reduction of hexavalent Cr to trivalent Cr at acidic conditions.

The synthesis of nanocellulose-based nanocomposites for the effective removal of hexavalent chromium ions from aqueous solution

The present study reports the synthesis of a polydopamine (PDA)/nanocellulose (NC) nanocomposite for the effective removal of chromium ions from water. PDA was used to modify NC surface producing a nanocomposite namely PDA/NC, by in situ polymerization of dopamine on the surface of NC. Thereafter, the as-synthesized nanocomposite was characterized using familiar techniques such as Fourier transform infrared, X-ray diffraction, X-ray photoelectron spectroscopy, ultraviolet-visible spectroscopy, and transmission electron microscopy. All results indicated the successful combination of PDA and NC in one nanocomposite. The PDA/NC nanocomposite was evaluated for the removal of hexavalent Cr(vi) ions from an aqueous solution. The adsorption conditions, such as pH, contact time, and initial Cr(vi) concentration, were optimized. Adsorption kinetic studies revealed that Cr(vi) removal on the surface of PDA/NC nanocomposite followed the pseudo-second-order kinetic model. Furthermore, isotherm studies revealed that Cr(vi) removal followed the Langmuir isotherm model with a maximum adsorption capacity (q m) of 210 mg/g. The adsorption mechanism study indicated that the Cr(vi) removal was reached via complexation, adsorption, and chemical reduction. The reusability of a PDA/NC nanocomposite for the removal of Cr(vi) ions was studied up to five cycles with acceptable results. The high adsorption capacity and multiple removal mechanisms validated the effective applicability of PDA/NC nanocomposite as a useful adsorbent for the removal of Cr(vi) ions from aqueous solution.

Adsorption of Tannic Acid and Macromolecular Humic/Fulvic Acid onto Polystyrene Microplastics: A Comparison Study

Dissolved organic matter (DOM) has been widely reported to influence the environmental behavior of microplastics (MPs), but little is known about the properties and mechanisms of interaction between specific DOM components and MPs. Here, we studied the adsorption of three representative DOM components (humic acid, HA; fulvic acid, FA; and tannic acid, TA) on polystyrene (PS) MPs in batch adsorption experiments. Results revealed that HA/FA adsorption was greater under acidic conditions, while higher TA adsorption on PS was found at pH 4 and 6. The divalent cation (Ca2+) exerted a more prominent role in enhancing HA, FA, and TA adsorption on PS than did monovalent ones (K+ and Na+). The adsorption process fitted well with the Freundlich isotherm model and the pseudo-second-order kinetics model. The adsorption site heterogeneity was evaluated using the site energy distribution analysis based on the Freundlich model. The greater binding ability of HA on the PS surface caused a more negatively charged surface than FA/TA, as reflected by Zeta potential values. The findings of this study not only provide valuable information about the adsorption behavior and interaction processes of various DOM components on PS MPs, but also aid our efforts to evaluate the environmental behaviors of MPs.

APTMS-BCAD modified magnetic iron oxide for magnetic solid-phase extraction of Cu(II) from aqueous solutions

Fe₃O₄@SiO₂-3-aminopropyltrimethoxysilane-1,8-bis (3-chloropropoxy) anthracene-9,10-dione was synthesized as a new, sustainable, and environmentally friendly adsorbent for magnetic solid-phase extraction of Cu(II) from aqueous solutions. The structure of the adsorbent was characterized by FTIR, XRD, SEM, EDX, and TEM analysis. Optimum conditions for Cu(II) adsorption were determined as adsorbent dose 0.04 g, pH 5.0, contact time 120 min, and beginning concentration of 30 mg/L in the adsorption process. The adsorption capacity for Cu(II) ions was 43.67 mg/g and the removal efficiency was 84.72 percent. The Langmuir isotherm and the pseudo-second-order model fit the experimental data better. Adsorption was a spontaneous and endothermic process based on the obtained thermodynamic properties such as ΔG°, ΔH°, and ΔS°. The results showed that the sorbent has good selectivity in the presence of competing ions. The method was determined to be accurate and effective using real water samples and CRM.

•

Magnetic Fe₃O₄@SiO₂-3-aminopropyl-trimethoxysilane-1,8-bis(3-chloropro-poxy) anthracene-9,10-dione was synthesized as a new, sustainable, and environmentally friendly adsorbent for magnetic solid-phase extraction of Cu(II) from aqueous solutions.

•

The results showed that the presence of competitor ions did not have a significant effect on the sorption of Cu(II) ion and the sorbent had good selectivity.

•

Using real water samples and CRM, the method was found to be accurate and effective.

Adsorption of dyes methyl violet and malachite green from aqueous solution on multi-step modified rice husk powder in single and binary systems: Characterization, adsorption behavior and physical interpretations

A novel modified rice husk (MRH) has been prepared for removing cationic dyes in both single system and binary system. SEM-EDS, FT-IR, XRD and XPS were used to characterize the physical and chemical properties of MRH. It showed that the maximum adsorption capacity of MRH for methyl violet (MV) and malachite green (MG) in single system was 154.49 and 996.97 mg g^-1, while in binary system was 530.94 and 408.58 mg g^-1, respectively. The experimental results showed that the pseudo-second-order kinetic model was better to describe the kinetic behavior of MV and MG adsorption. By using double layer adsorption model, we found that the n_D for MV adsorption were 2.52, 2.65 and 3.34 at 298, 308 and 318 K, respectively, and the n_D for MG adsorption were 4.59, 4.85 and 4.30, respectively. These results illustrated that multiple dye molecules were adsorbed on one adsorption site in non-parallel direction, indicating that the adsorption of dyes is multi-molecular mechanism. Furthermore, synergistic and antagonistic adsorption might be existed simultaneously in binary system. In summary, MRH has been shown well adsorption properties and reusability and our finding might provide a new idea for developing low-cost, efficient and reusable adsorbent to remove dyes from wastewater.

Polypyrrole-based adsorbents for Cr(VI) ions remediation from aqueous solution: a review

Anthropogenic activities are principally responsible for the manifestation of toxic and carcinogenic hexavalent chromium (Cr(VI)) triggering water pollution that threatens the environment and human health. The World Health Organisation (WHO) restricts Cr(VI) ion concentration to 0.1 and 0.05 mg/L in inland surface water and drinking water, respectively. The available technologies for Cr(VI) ion removal from water were highlighted with an emphasis on the adsorption technology. Furthermore, the characteristics of several polypyrrole-based adsorbents were scrutinized including amino-containing compounds, biosorbents, graphene/graphene oxide, clay materials and many other additives with reported effective Cr(VI) ion uptake. This efficiency in Cr(VI) ions adsorption is attributed to enhanced redox properties, increased number of functional groups as well as the synergistic behaviour of the materials making up the composites. The Langmuir isotherm best described the adsorption processes with maximum adsorption capacities ranging from 3.40-961.50 mg/g. The regeneration of Cr(VI) ion-laden adsorbents was studied. Ion exchange, electrostatic attractions, complexation, chelation reactions with protonated sites and reduction were the mechanisms of adsorption. Nevertheless, there are limited details on comprehensive adsorbent regeneration studies to prolong robustness in adsorption-desorption cycles and utilization of the Cr(VI) ion-laden adsorbent in other areas of research to limit the threat of secondary pollution.

Modelling and optimization of hexavalent chromium removal from aqueous solution by adsorption on low-cost agricultural waste biomass using response surface methodological approach

In this study, a response surface methodology (RSM) approach using central composite design (CCD) was investigated to develop a mathematical model and to optimize the effects of pH, adsorbent amount and temperature related to the hexavalent chromium removal by biosorption on peanut shells (PSh). The highest removal percentage of 30.28% was found by the predicted model under the optimum conditions (pH of 2.11, 0.73 g of PSh and 37.2 °C) for a 100 mg/L initial Cr(VI) concentration, which was very near to the experimental value (29.92%). The PSh was characterized by SEM, EDX, FTIR, BET, XRD analyses. Moreover, a Langmuir isotherm fitted well (R² = 0.992) with the experimental data, and the maximum adsorption capacity was discovered to be 2.48 and 3.49 mg/g respectively at 25 and 45 °C. Kinetic data were well foreseen by pseudo second order. Thermodynamic study depicted that biosorption of Cr(VI) onto PSh was spontaneous and endothermic. Regeneration of the PSh using NaOH showed a loss <5% in the Cr(VI) removal efficiency up to three recycle runs. In summary, the Cr(VI) removal onto economic, sensitive and selective biosorbent (PSh) was optimized using CCD to study biosorption behaviors.

Magnetic Nanoparticle Composites: Synergistic Effects and Applications

Composite materials are made from two or more constituent materials with distinct physical or chemical properties that, when combined, produce a material with characteristics which are at least to some degree different from its individual components. Nanocomposite materials are composed of different materials of which at least one has nanoscale dimensions. Common types of nanocomposites consist of a combination of two different elements, with a nanoparticle that is linked to, or surrounded by, another organic or inorganic material, for example in a core-shell or heterostructure configuration. A general family of nanoparticle composites concerns the coating of a nanoscale material by a polymer, SiO2 or carbon. Other materials, such as graphene or graphene oxide (GO), are used as supports forming composites when nanoscale materials are deposited onto them. In this Review we focus on magnetic nanocomposites, describing their synthetic methods, physical properties and applications. Several types of nanocomposites are presented, according to their composition, morphology or surface functionalization. Their applications are largely due to the synergistic effects that appear thanks to the co-existence of two different materials and to their interface, resulting in properties often better than those of their single-phase components. Applications discussed concern magnetically separable catalysts, water treatment, diagnostics-sensing and biomedicine.

Recent progress in the conversion of biomass wastes into functional materials for value-added applications

The amount of biomass wastes is rapidly increasing, which leads to numerous disposal problems and governance issues. Thus, the recycling and reuse of biomass wastes into value-added applications have attracted more and more attention. This paper reviews the research on biomass waste utilization and biomass wastes derived functional materials in last five years. The recent research interests mainly focus on the following three aspects: (1) extraction of natural polymers from biomass wastes, (2) reuse of biomass wastes, and (3) preparation of carbon-based materials as novel adsorbents, catalyst carriers, electrode materials, and functional composites. Various biomass wastes have been collected from agricultural and forestry wastes, animal wastes, industrial wastes and municipal solid wastes as raw materials with low cost; however, future studies are required to evaluate the quality and safety of biomass wastes derived products and develop highly feasible and cost-effective methods for the conversion of biomass wastes to enable the industrial scale production.

Modeling of chromium (VI) removal from aqueous solution using modified green-Graphene: RSM-CCD approach, optimization, isotherm, and kinetic studies

BACKGROUND

The aim of this study was to investigate the removal of Cr (VI) using Green-Graphene Nanosheets (GGN) synthesized from rice straw.

METHODS

Synthesis of the GGN was optimized using response surface methodology and central composite design (CCD). The effect of two independent variables including KOH-to-raw rice ash (KOH/RRA) ratio and temperature on the specific surface area of the GGN was determined. To have better removal of Cr (VI), GGN was modified using the grafting amine group method. In the Cr (VI) removal process, the effects of four independent variables including initial Cr (VI) concentration, adsorbent dosage, contact time, and initial solution pH were studied.

RESULTS

The results of this study showed that the optimum values of the KOH/RRA ratio and temperature for the preparation of GGN were 10.85 and 749.61 °C, respectively. The maximum amount of SSA obtained at optimum conditions for GGN was 551.14 ± 3.83 m 2 /g. The optimum conditions for Cr (VI) removal were 48.35 mg/L, 1.46 g/L, 44.30 min, and 6.87 for Cr (VI) concentration, adsorbent dosage, contact time, and pH, respectively. Based on variance analysis, the adsorbent dose was the most sensitive factor for Cr (VI) removal. Langmuir isotherm (R2 = 0.991) and Pseudo-second-order kinetic models (R2 = 0.999) were the best fit for the study results and the Q max was 138.89 mg/g.

CONCLUSIONS

It can be concluded that the predicted conditions from the GGN synthesis model and the optimum conditions from the Cr (VI) removal model both agreed with the experimental findings.

Pb2+ and Cd2+ recovery from water using residual tea waste and SiO2@TW nanocomposites

This work reports the fabrication of SiO₂@TW nanocomposites and their application for Pb²⁺ and Cd²⁺ ions sequestration from simulated water. Residual tea waste has also been used for metal ions sequestration to compare the potential of SiO₂@TW nanocomposites. The SEM, TEM, BET, FTIR and EDX techniques were employed for the characterization of SiO₂@TW nanocomposites and residual tea waste. Particle sizes of SiO₂@TW nanocomposites was in the range of 6.8-12 nm. The experiments were carried out in batch mode to explore the effect of various operating parameters on the sequestration of Pb²⁺ and Cd²⁺ ions from water. The experimental data was subjected to various thermodynamic, kinetic and isothermic models. According to Langmuir model, the maximum adsorption efficiency of the SiO₂@TW nanocomposites was 153 mg/g for Pb²⁺ and 222 mg/g for Cd²⁺ but maximum adsorption efficiency of residual tea waste for Pb²⁺ was 125 mg/g and for Cd²⁺ was 142.9 mg/g. This study suggested that due to the presence of active sites SiO₂@TW nanocomposites has greater potential for metal sequestration than residual tea waste.

The magnetic covalent organic framework as a platform for high-performance extraction of Cr(VI) and bisphenol a from aqueous solution

The magnetic covalent organic framework with β-ketoenamine linkage (Fe₃O₄@COF(TpPa-1)) was fabricated by the hydrothermal method. The obtained Fe₃O₄@TpPa-1 integrated four advantages, namely easy preparation, high stability, excellent adsorption performance (485.2 m²/g) and good recoverability (19.5 emu/g), which enabled it an ideal sorbent for wastewater treatment. Fe₃O₄@TpPa-1 exhibited excellent adsorption capacities for Cr (VI) (245.45 mg/g) and bisphenol A (1220.97 mg/g). The adsorption kinetics and isotherms were in alignment to the pseudo-second-order and Langmuir model, respectively. After five times cycles, the adsorption capacity of Fe₃O₄@TpPa-1 still retained at a high level. According to Materials Studio simulation and XPS analysis, the adsorption mechanism was attributed to the presence of the homogeneously distributed imine and carbonyl functional groups in the framework of TpPa-1, allowing them to serve as platforms for anchoring heavy metals and organic pollutants. Besides, the hydrophobic skeleton structures of TpPa-1 endowed them good adsorption performance towards organic pollutants via hydrogen -bonding (NH^…O^…HO) and π-π interaction. Therefore, the recyclable Fe₃O₄@TpPa-1 showed a broad application prospects in environmental remediation.

Activated biochar derived from Opuntia ficus-indica for the efficient adsorption of malachite green dye, Cu+2 and Ni+2 from water

Applicability of biochar in water treatment is gaining interest due to its sustainability and low production cost. Herein, the biochar (BC) and activated biochar (ABC) synthesized from the cladodes of Opuntia ficus-indica (OFI) cactus were evaluated as a renewable adsorbent for adsorption of organic as well as inorganic pollutants including malachite green (MG) dye, Cu⁺² and Ni⁺² heavy metals. The modification of biochar with NaOH resulted higher surface basicity regarding more oxygen containing functional groups on the surface. The maximum uptake of 1341 mg g^-1, 49 mg g^-1 and 44 mg g^-1 onto activated biochar for malachite green dye, Cu⁺² and Ni⁺² was acquired through the best fitted Langmuir isotherm model. Pseudo-second-order and Elovich models were found to provide a suitable fit indicating towards the chemisorption of all three components. Film diffusion and chemisorption are the main steps in adsorption of MG dye and heavy metals on activated biochar. The adsorption mechanisms were also hypothesized for adsorption of MG dye, Cu⁺² and Ni⁺². The remarkable adsorption capacities with higher reusability characteristics for adsorption of organic pollutants as well as inorganic heavy metals entrusts this activated biochar as a potential cost-effective adsorbent to mitigate water pollution issue.

A systematic study of hexavalent chromium adsorption and removal from aqueous environments using chemically functionalized amorphous and mesoporous silica nanoparticles

We report on the synthesis and characterization of highly monodisperse amorphous silica nanoparticles (ASNs) and mesoporous silica nanoparticles (MSNs) with particle sizes of 15-60 nm. We demonstrate adsorption of Cr(VI) ions on amino-functionalized ASNs (NH2-ASNs) and MSNs (NH2-MSNs) and their removal from aqueous environments and show the specific surface area (SSA) of NH2-MSNs is four times as larger as that of NH2-ASNs and that more than 70% of the total SSA of NH2-MSNs is due to the presence of nanopores. Analyses of Cr(VI) adsorption kinetics on NH2-ASNs and NH2-MSNs exhibited relatively rapid adsorption behavior following pseudo-second order kinetics as determined by nonlinear fitting. NH2-ASNs and NH2-MSNs exhibited significantly higher Cr(VI) adsorption capacities of 34.0 and 42.2 mg·g-1 and removal efficiencies of 61.9 and 76.8% than those of unfunctionalized ASNs and MSNs, respectively. The Langmuir model resulted in best fits to the adsorption isotherms of NH2-ASNs and NH2-MSNs. The adsorption of Cr(VI) on NH2-ASNs and NH2-MSNs was an endothermic and spontaneous process according to the thermodynamic analyses of temperature-dependent adsorption isotherms. The removal efficiencies of NH2-ASNs and NH2-MSNs exhibited a moderate reduction of less than 25% of the maximum values after five regeneration cycles. Furthermore, NH2-MSNs were also found to reduce adsorbed Cr(VI) into less harmful Cr(III).

Preparation of KOH and H3PO4 Modified Biochar and Its Application in Methylene Blue Removal from Aqueous Solution

Improperly treated or directly discharged into the environment, wastewater containing dyes can destroy the quality of water bodies and pollute the ecological environment. The removal of dye wastewater is urgent and essential. In this study, corn stalk was pyrolyzed to pristine biochar (CSBC) in a limited oxygen atmosphere and modified using KOH and H3PO4 (KOH-CSBC, H3PO4-CSBC, respectively). The biochars were characterized by surface area and pore size, X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), as well as their behavior in adsorbing methylene blue (MB). Results indicated that the pore structure of CSBC became more developed after modification by KOH. Meanwhile, H3PO4-CSBC contained more functional groups after activation treatment. The pseudo-second-order kinetic and the Langmuir adsorption isotherm represented the adsorption process well. The maximum MB adsorption capacity of CSBC, KOH-CSBC, and H3PO4-CSBC was 43.14 mg g−1, 406.43 mg g−1 and 230.39 mg g−1, respectively. Chemical modification significantly enhanced the adsorption of MB onto biochar, especially for KOH-CSBC. The adsorption mechanism between MB and biochar involved physical interaction, electrostatic interaction, hydrogen bonding and π–π interaction. Hence, modified CSBC (especially KOH-CSBC) has the potential for use as an adsorbent to remove dye from textile wastewater.

Removal of Tetracycline by Hydrous Ferric Oxide: Adsorption Kinetics, Isotherms, and Mechanism

The removal of tetracycline (TC) from solution is an important environmental issue. Here we prepared an adsorbent hydrous ferric oxide (HFO) by adjusting a FeCl₃·6H₂O solution to neutral pH. HFO was characterized by a surface area analyzer, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS), and was used to remove TC from solution. The influence of pH, solid-to-liquid ratio, ionic type, and strength on TC removal was investigated. Adsorption kinetics and isotherms were also determined. HFO after adsorption of TC was analyzed by FTIR and XPS to investigate the adsorption mechanism. The results showed that the adsorption of TC increased from 88.3% to 95% with increasing pH (3.0-7.0) and then decreased. K⁺ ions had little effect on TC adsorption by HFO. However, Ca²⁺ and Mg²⁺ reduced the adsorption of TC on HFO. When the concentrations of Ca²⁺ and Mg²⁺ were increased, the inhibitory effect was more obvious. Pseudo-second-order kinetics and the Langmuir model fitted the adsorption process well. The maximum adsorption capacity of TC on HFO reached 99.49 mg·g^-1. The adsorption process was spontaneous, endothermic, and increasingly disordered. Combination analysis with FTIR and XPS showed that the mechanism between TC and HFO involved electrostatic interactions, hydrogen interactions, and complexation. Therefore, the environmental behavior of TC could be affected by HFO.

Preparation of bio-inspired trimethoxysilyl group terminated poly(1-vinylimidazole)-modified-chitosan composite for adsorption of chromium (VI) ions

Chitosan and poly(1-vinylimidazole) are both potential adsorbents to remove Cr(VI). Here, we designed the preparation of new adsorbents by combining chitosan and poly(1-vinylimidazole) to get the synergistic effect for the removal of hexavalent chromium. Trimethoxysilyl group terminated poly(1-vinylimidazole)-modified-chitosan composite was successfully synthesized by one-step free radical polymerization based on the grafting backbone of chitosan and vinylimidazole. The resulting adsorbents were used for the removal of Cr(VI) ions from the aqueous solution. The modified chitosan composite was characterized by ATR, FTIR, BET isotherm studies, elemental analysis, TGA, DSC, FE-SEM, and EDX. ATR. FTIR results confirmed the presence of the imidazole group in modified chitosan. The adsorption results were described by the Langmuir isotherm model with a maximum adsorption capacity of 196.1 mg/g for modified chitosan, however, the chitosan yielded 151.5 mg/g. It has been observed that the adsorption of chromium fitted better with the pseudo-second-order kinetics. The modified chitosan composite exhibited greater adsorption capacity than chitosan for hexavalent chromium and has potential application for Cr(VI) removal from aqueous solution containing other common ions with regeneration ability. This novel approach of modifying chitosan with telomerized poly(1-vinyl imidazole) offers potential application in wastewater treatment of different industries releasing Cr (VI).

Enhanced adsorption-coupled reduction of hexavalent chromium by 2D poly(m-phenylenediamine)-functionalized reduction graphene oxide

To improve the mass transfer efficiency of poly(m-phenylenediamine) for the effective removal of hexavalent chromium (Cr (VI)) from aqueous solution, a facile and one-step method to prepare two-dimensional poly(m-phenylenediamine) functionalized reduction graphene oxide (rGO-PmPD) by dilution polymerization is developed. The structure and morphology of rGO-PmPD as well as rGO and PmPD were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), Brunauer-Emmett-Teller (BET), Fourier-transformed infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), Raman, and X-ray diffraction (XRD). The preparation mechanism, adsorption performance, and mechanism of rGO-PmPD were then investigated in detail. The obtained rGO-PmPD exhibited thin 2D nanosheet morphology with much improved specific surface area and pore volume (18 and 25 times higher than that of PmPD, respectively). The Cr (VI) adsorption of rGO-PmPD was fitted well with the pseudo-second-order kinetic model and Langmuir isotherm model, and the maximum adsorption capacity of rGO-PmPD reached 588.26 mg g^-1, higher than that of PmPD (400 mg g^-1) and rGO (156.25 mg g^-1). Moreover, the regeneration efficiency of the rGO-PmPD nanosheet is also promising that the adsorption performance after five times of adsorption-desorption cycles still maintains more than 530 mg g^-1. The removal mechanism involved reduction coupled with adsorption and electrostatic interaction between rGO-PmPD and Cr (VI), and ~ 65% of Cr (VI) removal was attributed to reduction and ~ 35% was ascribed to adsorption and electrostatic interaction. This study thus provides a simple and effective route to achieve high accessible surface area of adsorbent materials with enhanced mass transfer efficiency and thereafter improved adsorption performance.

Facile synthesis of acid-modified UiO-66 to enhance the removal of Cr(VI) from aqueous solutions

The adsorption behavior and mechanism of Cr(VI) on different acid-modified UiO-66s (Form-UiO-66 and Ac-UiO-66) were systematically investigated for the first time through a series of characterizations, and theoretical calculations of batch experiments. The characterization results demonstrate that acid-modified UiO-66 exhibited a larger specific surface area than did unmodified UiO-66. In addition, since the regulator (formic acid) of Form-UiO-66 was the stronger competition, the specific surface area of Form-UiO-66 (1138 m² g^-1) was larger than that of Ac-UiO-66 (915 m² g^-1). Under optimal experimental conditions, the maximum adsorption capacity of Cr(VI) was 243.9 mg g^-1 on Form-UiO-66, and 151.52 mg g^-1 on Ac-UiO-66, which was far higher than on the reported unmodified UiO-66 (36.4 mg g^-1). The results of pH testing, zeta potential, and X-ray photoelectron spectroscopy analysis indicate that Cr(VI) ions were fixed to adsorbent surfaces via electrostatic adsorption. Acid-modified UiO-66 increased the surface active site via the increase in its specific surface area to enhance adsorption capacity of Cr(VI). These results indicated that both the surface charge and specific surface area of the adsorbent primarily determined the Cr(VI) adsorption capacity. Acid modified UiO-66 exhibited enhanced adsorption capacity, stability, and regeneration, compared to traditional adsorbents, and these results provide new insights into adsorption by MOFs.

Selective Cesium Adsorptive Removal on Using Crosslinked Tea Leaves

To remove the radioactive cesium from the polluted environment, tea leaves were chosen as cheap, and abundantly available environment-friendly bio-adsorbents to investigate the alkali metals adsorption. Fresh and used tea leaves (FT and UT) were found to have high efficiency and selectivity for cesium adsorption, after the crosslinking with concentrated sulfuric acid. Calculation of the proton-exchanged amount suggested adsorption mechanism of three alkali metals on crosslinked tea leaves involve a cationic exchange with a proton from the hydroxyl groups of the crosslinked tea leaves, as well as coordination with ethereal oxygen atoms to form the chelation. Further, considering the practical application of the polluted water treatment, the competitive adsorption of Cs+ and Na+ ions was investigated by the batch-wise method and column chromatography separation. Unlike the conventional ion exchange and chelate resins with less selectivity for Cs+ coexisting cations, both crosslinked fresh tea leaves (CFT) and crosslinked used tea leaves (CUT) exhibited Cs selectivity over Na. In addition, batch adsorption studies revealed that the cesium adsorptions were driven by the Langmuir isotherm model; the capacity of both crosslinked tea leaves for cesium adsorption was determined to be around 2.5 mmol g−1. The adsorption capacities are sufficiently higher in comparison with those of synthetic polymers, inorganic ion-exchangers, and other bio-adsorbents.

Surface modification of poly(vinyl alcohol) sponge by acrylic acid to immobilize Prussian blue for selective adsorption of aqueous cesium

Prussian blue (PB) is known to be an effective cesium adsorbent, but the direct application of PB is limited by the difficulty of its recovery from solution. In this study, PB was immobilized on a porous support media, poly(vinyl alcohol) (PVA) sponge, for use as a selective material for cesium adsorption. The commercially available PVA sponge was functionalized by the addition of poly(acrylic acid) (PAA) (i.e., PAA-PVA) to enhance the PB immobilization, which increased both PB loading and binding strength. The AA functionalization changed the major functional groups from hydroxyl to carboxylic, as confirmed by Fourier-transform infrared spectroscopy. PB was further synthesized in the PAA-PVA using layer-by-layer (LBL) assembly, which contributed to more stable PB formation, and reduced detachment of PB during washing. The prepared adsorbent, PAA-L@PVA-PB, was tested for cesium adsorption capability. Cesium adsorption was equilibrated within three hours, and the maximum cesium adsorption capacity was 4.082 mg/g, which was 5.7 times higher than Pure-L@PVA-PB. The observed decrease in solution pH during cesium adsorption inhibited overall cesium uptake, however, this was minimized by buffering. The prepared PAA-L@PVA-PB was used as a column filling material and its potential use as a countermeasure for removing radioactive cesium from a contaminated water stream was demonstrated.

Fluorescent Sensors Based on Organic Polymer-Capped Gold Nanoparticles for the Detection of Cr(VI) in Water

“Turn-off” fluorescent sensors for Cr(VI) have been fabricated based on organic polymer-capped gold nanoparticles. The fluorescence intensity, as well as the response behavior of the sensors, is dependent on the pH values of buffer solution and dilution amounts of the sensors. When diluted 50 times with pH 2.0 buffer solution, the sensors show good linear responses toward Cr(VI) at concentrations between 2.8–5.9 μM and 5.9–29 μM. The calculated detection limit is 0.63 μM (S/N=3). The interference study and real sample assays exhibit satisfying selectivity and reliability results. Furthermore, the quenched intensity of fluorescence could be recovered by Fe(II) ion, which provides a potential method to detect Fe(II) ions. The quenching and recovering mechanisms have also been investigated. It is suggested that the quenching mechanism is based on the combined effects of internal electron transfer and the inner filter effect. Finally, the recovering mechanism is based on the redox reactions between the Cr(VI) and Fe(II) ions.

One-step synthesis of versatile magnetic nanoparticles for efficiently removing emulsified oil droplets and cationic and anionic heavy metal ions from the aqueous environment

Versatile polyethyleneimine (PEI)-coated Fe₃O₄ magnetic nanoparticles (MNPs) have been synthesized by a one-step solvothermal method. The morphologies, structures, and properties of MNPs prepared for different reaction times have been characterized through various techniques. The synthesized MNPs were then used to separate emulsified oil and cationic and anionic heavy metal ions from the aqueous environment; moreover, the effects of the temperature, pH, and ionic strength of aqueous media, the solvothermal reaction time, and the number of reuse cycles on the removal efficiency have been investigated in detail. The results showed that pseudo-second-order kinetics and the Langmuir isotherm well described the adsorption processes of Cu(II) and Cr(VI). The Langmuir model yielded maximum adsorption capacities of 66.6 mg g^-1 for Cu(II) and 54.5 mg g^-1 for Cr(VI) at pH 5.0 and 25 °C. The synthetic MNPs could also efficiently separate diesel oil or olive oil droplets stabilized by sodium dodecyl sulfate from aqueous media. Moreover, these MNPs could be recycled five times without showing significant loss in separation efficiency. Notably, the synthesized PEI-coated MNPs could simultaneously separate emulsified oil and cationic and anionic heavy metal ions from multicomponent wastewater. Such versatile PEI-coated MNPs displayed good affinity towards emulsified oil and cationic and anionic heavy metal ions, showing great potential for practical applications in the treatment of complicated industrial wastewater matrices. Graphical abstract Simultaneous separation of emulsified oil and cationic and anionic heavy metal ions from aqueous media by using polyethyleneimine-coated Fe₃O₄ magnetic nanoparticles.

Mechanism and modeling of hexavalent chromium interaction with a typical black soil: the importance of the relationship between adsorption and reduction

Black soils have a significant retention effect on the migration of Cr(vi) towards groundwater, and Cr(vi) adsorption and reduction are both involved in this process. However, the adsorption and reduction of Cr(vi) were always investigated separately in previous studies resulting in an unclear relationship between them. In this study, the adsorption and reduction kinetic processes of Cr(vi) by a typical black soil were separately investigated under different initial Cr(vi) concentrations (40–400 mg L⁻¹) and pH conditions (3.5–7.0) by the means of desorption treatment, and the equilibrium relationship between aqueous and adsorbed Cr(vi) was innovatively established based on the kinetic data. It was found that under pH 5.7 the adsorbed Cr(vi) content on soil particles was linearly correlated with the remaining Cr(vi) concentration in solution with time (R² = 0.98), and the reduction rate of Cr(vi) in the reaction system was linearly correlated with the adsorbed Cr(vi) content on soil particles with time (R² = 0.99). With pH decreasing from 7.0 to 3.5, the partition of Cr(vi) between solid and aqueous phases turned out to be of a non-linear nature, which can be fitted better by the Freundlich model. The retention of Cr(vi) by black soil was determined to follow the “adsorption–reduction” mechanism, where the Cr(vi) was first rapidly adsorbed onto the soil particles by a reversible adsorption reaction, and then the adsorbed Cr(vi) was gradually reduced into Cr(iii). A two-step kinetic model was developed accordingly, and the experimental data were fitted much better by the two-step adsorption–reduction kinetic model (R² = 0.89 on average) compared with the traditional first-order and second-order kinetic models (R² = 0.66 and 0.76 on average respectively). This paper highlights the novel two step kinetic model developed based on the proposed “adsorption–reduction” mechanism of Cr(vi) retention by a typical black soil.

A novel two-step kinetic model was developed based on the proposed “adsorption–reduction” mechanism of Cr(vi) retention by a typical black soil.

Removal of tetracycline from aqueous solution by biochar derived from rice straw

Antibiotic pollution has drawn considerable attention and the removal of antibiotic from water is crucial. In the present study, biochars were produced from rice straw under different pyrolytic temperatures of 300 °C, 500 °C, and 700 °C (RSBC300, RSBC500, and RSBC700, respectively). The biochars were used to remove tetracycline (TC) from aqueous solution and the influence of different experimental conditions on TC removal was investigated. The results showed that the order of adsorption was as follows: RSBC700 > RSBC500 > RSBC300. A pseudo-second-order model and Langmuir isotherm model described the adsorption process of TC on biochars. Maximum adsorption capacity could reach 50.72 mg g^-1 at 35 °C based on Langmuir fitting. Initial pH of the solution had little influence on TC removal. The inhibitory effect of Ca²⁺ on TC removal was greater than that of Na⁺. High system temperature was beneficial for TC removal. Minerals in RSBC500 affected TC removal and minerals in RSBC300 and RSBC700 had little influence on TC removal. TC removal rate decreased from 58.86 to 27.84% when the minerals were removed from RSBC500. The main mechanism involved in high-temperature biochar and TC adsorption included EDA π-π interactions and electrostatic interactions. Therefore, high-temperature biochar derived from rice straw has the potential to act as an adsorbent to remove tetracycline from aqueous solution.

Removal Behavior of Methylene Blue from Aqueous Solution by Tea Waste: Kinetics, Isotherms and Mechanism

Tea waste (biosorbent) was characterized by BET, SEM, FTIR, XPS, solid state ¹³C-NMR and applied to remove methylene blue (MB) from aqueous solution. The effect of different factors on MB removal, kinetics, isotherms and potential mechanism was investigated. The results showed that tea waste contains multiple organic functional groups. The optimum solid-to-liquid ratio for MB adsorption was 4.0 g·L⁻¹ and the initial pH of the MB solution did not need to be adjusted to a certain value. The pseudo-second-order model could well fit the adsorption kinetic process. The adsorption process could be divided into two stages: a fast adsorption stage and a slow adsorption stage. The adsorption isotherm could be well described by Langmuir and Temkin isotherm models. The maximum adsorption amount could reach 113.1461 mg·g⁻¹ based on Langmuir isotherm fitting. Desorption and reusability experiments showed that MB adsorption onto tea waste could be stable and could not cause secondary pollution. The interaction mechanism between tea waste and MB involved electrostatic attraction, hydrogen bond, ion exchange, π-π binding. The organic functional groups of tea waste played an important role during the MB removal process. Therefore, tea waste has the potential to act as an adsorbent to remove MB from aqueous solution.

Biogenic synthesis of iron oxide nanoparticles using Agrewia optiva and Prunus persica phyto species: Characterization, antibacterial and antioxidant activity

A phytoextract mediated synthesis of iron oxide nanoparticles using Agrewia optiva (Dhaman or Biul) and Prunus persica (Peach) leaf extract as capping and stabilizing agent without using hazardous toxic chemicals via biogenic route has been studied. The biogenic method of synthesis is convenient, rapid, cost effective and ecofriendly. The green synthesized nanoparticles were characterized by Ultraviolet-visible spectroscopy, Fourier transform infrared spectroscopy, Attenuated total reflectance spectroscopy, X-ray diffraction analysis, scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy and dynamic light scattering measurements. The antibacterial study was determined by agar well diffusion method to measure the efficiency of both phyto species extract and its mediated iron oxide nanoparticles against five gram positive bacterial stains such as Staphylococcus aureus (S. aureus), Streptococcus mutans (S. mutans), Streptococcus pyrogenes (S. pyrogenes), Corynebacterium diphtheriae (C. diphtheriae) and Corynebacterium xerosis (C. xerosis) and three gram negative bacterial stains such as Escherichia coli (E. coli), Klebsiella pneuomoniae (K. pneuomoniae) and Pseudomonas aeruginosa (P. aeruginosa). The antibiotic Ciprofloxacin and Gentamicin have been used as reference standard drugs for gram positive and gram negative bacterial stains, respectively. The antioxidant activity of the phyto extracts and prepared nanoparticles have been performed using 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical assay employing l-ascorbic acid as a standard.

Magnetically Modified Agricultural and Food Waste: Preparation and Application

The annual food and agricultural waste production reaches enormous numbers. Therefore, an increasing need to valorize produced wastes arises. Waste materials originating from the food and agricultural industry can be considered as functional materials with interesting properties and broad application potential. Moreover, using an appropriate magnetic modification, smart materials exhibiting a rapid response to an external magnetic field can be obtained. Such materials can be easily and selectively separated from desired environments. Magnetically responsive waste derivatives of biological origins have already been prepared and used as efficient biosorbents for the isolation and removal of both biologically active compounds and organic and inorganic pollutants and radionuclides, as biocompatible carriers for the immobilization of diverse types of (bio)molecules, cells, nano- and microparticles, or (bio)catalysts. Potential bactericidal, algicidal, or anti-biofilm properties of magnetic waste composites have also been tested. Furthermore, low cost and availability of waste biomaterials in larger amounts predetermine their utilization in large-scale processes.

Adsorption of methylene blue and tetracycline onto biomass-based material prepared by sulfuric acid reflux

The adsorptive removal of environmental pollutants is an effective method for the treatment of contaminated water. Thus, the preparation of adsorbents from low-cost, readily available, and renewable resources has garnered immense attention in recent years. In this study, a facile one-step method for the preparation of a high-capacity adsorbent is demonstrated by refluxing pine cones in concentrated sulfuric acid. With sulfuric acid reflux, the pine cones undergone carbonization as well as functionalization with sulfonic acid groups. The adsorbent demonstrated high adsorption capacity for two emerging organic pollutants, methylene blue (MB) and tetracycline (TC). Different variables such as pH, temperature, contact time, and initial concentration of the pollutants were analyzed and showed that the adsorption capacity for MB increased in a basic pH and vice versa for TC. Also, the elevated temperature favored the adsorption for both MB and TC. The maximum adsorption capacity was found to be 1666.66, and 357.14 mg g⁻¹ for MB and TC, respectively. In comparison to the pristine pine cone, the sulfuric acid treated pine cone demonstrated an extraordinary improvement in the adsorption capacity. The adsorption of MB and TC was performed from the tap water matrix and similar adsorption capacities were found. A packed glass column was also prepared to demonstrate the adsorption of MB from tap water under flow conditions.

Facile conversion of pine cones into a high-capacity adsorbent for the removal of methylene blue and tetracycline from water.

Synthesis of a core–shell magnetic Fe3O4–NH2@PmPD nanocomposite for efficient removal of Cr(vi) from aqueous media

The magnetic Fe₃O₄–NH₂@PmPD composites show outstanding Cr(vi) removal performance due to the abundant nitrogen-containing functional groups.