Polydopamine and eumelanin molecular structures investigated with ab initio calculations

Accelerated and precise identification of antioxidants and pesticides using a smartphone-based colorimetric sensor array

The integration of smartphones with conventional analytical approaches plays a crucial role in enhancing on-site detection platforms for point-of-care testing. Here, we developed a simple, rapid, and efficient three-channel colorimetric sensor array, leveraging the peroxidase (POD)-like activity of polydopamine-decorated FeNi foam (PDFeNi foam), to identify antioxidants using both microplate readers and smartphones for signal readouts. The exceptional catalytic capacity of PDFeNi foam enabled the quick catalytic oxidation of three typical peroxidase substrates (TMB, OPD and 4-AT) within 3 min. Consequently, we constructed a colorimetric sensor array with cross-reactive responses, which was successfully applied to differentiate five antioxidants (i.e., glycine (GLY), glutathione (GSH), citric acid (CA), ascorbic acid (AA), and tannic acid (TAN)) within the concentration range of 0.1-10 μM, quantitatively analyze individual antioxidants (with AA and CA as model analytes), and assess binary mixtures of AA and GSH. The practical application was further validated by discriminating antioxidants in serum samples with a smartphone for signal readout. In addition, since pesticides could be absorbed on the surface of PDFeNi foam through π-π stacking and hydrogen bonding, the active sites were differentially masked, leading to featured modulation on POD-like activity of PDFeNi foam, thereby forming the basis for pesticides discrimination on the sensor array. The nanozyme-based sensor array provides a simple, rapid, visual and high-throughput strategy for precise identification of various analytes with a versatile platform, highlighting its potential application in point-care-of diagnostic, food safety and environmental surveillance.

Mechanism of Self-Oxidative Copolymerization and its Application with Polydopamine-pyrrole Nano-copolymers

Currently, the copolymer of dopamine (DA) and pyrrole (PY) via chemical and electrochemical oxidation usually requires additional oxidants, and lacks flexibility in regulating the size and morphology, thereby limiting the broad applications of DA-PY copolymer in biomedicine. Herein, the semiquinone radicals produced by the self-oxidation of DA is ingeniously utilized as the oxidant to initiate the following copolymerization with PY, and a series of quinone-rich polydopamine-pyrrole copolymers (PDAm-nPY) with significantly enhanced absorption in near-infrared (NIR) region without any additional oxidant assistance is obtained. Moreover, the morphology and size of PDAm-nPY can be regulated by changing the concentration of DA and PY, thereby optimizing nanoscale PDA0.05-0.15PY particles (≈ 150 nm) with excellent NIR absorption and surface modification activity are successfully synthesized. Such PDA0.05-0.15PY particles show effective photoacoustic (PA) imaging and photothermal therapy (PTT) against 4T1 tumors in vivo. Furthermore, other catechol derivatives can also copolymerize with PY under the same conditions. This work by fully utilizing the semiquinone radical active intermediates produced through the self-oxidation of DA reduces the dependence on external oxidants in the synthesis of composite materials and predigests the preparation procedure, which provides a novel, simple, and green strategy for the synthesis of other newly catechol-based functional copolymers.

Ion imprinted differential modulation system based on enhanced optic-fiber evanescent wave for sensitive and label-free detection of trace nickel ions

An optical system with low cost monitoring, high sensitivity, strong selectivity and much lower nickel ion (Ni2+) content in tap water than the World Health Organization (WHO) standard (1.19 μM) has been prepared by a simple strategy. This proposed ion-imprinted differential modulation system is based on the Bragg grating (FBG) and microfiber interferometer structure, and the interferometer sensing surface is coated with a polydopamine (PDA)/graphene oxide (GO) film to enhance its sensitivity. Combined with the ion imprinting technique, the microfiber interferometer sensor sensitivity can reach 0.32 nm/nM with the detection limit of 0.66 nM in the low concentration range (Ni2+ concentration range is 0 nM-100 nM). The experiment not only studies the principle of microfiber interferometer and FBG and their refractive index and temperature performance, but also shows that the FBG power change has a good fitting relationship with wavelength change. In addition, this system performance by the amount of power difference rather than the amount of wavelength shift, which significantly saves on the high cost weight, and size associated with the use of spectral analyzers in traditional inspection systems. This study provides a novel and easy method to develop new sensors with higher comprehensive performance.

Structure prediction from spectra amidst dynamical heterogeneity in melanin

Melanin is a biopolymer pigment that plays a central role in skin photoprotection. Its extensive chemical and dynamical heterogeneity imparts this property through a broad featureless ultraviolet/visible absorption spectrum. Conventionally, the rational design of synthetic photoprotective pigments revolves around establishing the structure-spectra correlation and developing biomimetic materials with desired optical properties. This approach fails to explain the mechanistic details of melanin's absorption spectrum because it arises from an ensemble of structures rather than a local minimum on the potential energy surface. Here, we propose an inverse design approach to elucidate the contributions of dominant chromophoric units in various wavelength domains of the melanin spectrum.

Ultrasound-activated piezo-hot carriers trigger tandem catalysis coordinating cuproptosis-like bacterial death against implant infections

Implant-associated infections due to the formation of bacterial biofilms pose a serious threat in medical healthcare, which needs effective therapeutic methods. Here, we propose a multifunctional nanoreactor by spatiotemporal ultrasound-driven tandem catalysis to amplify the efficacy of sonodynamic and chemodynamic therapy. By combining piezoelectric barium titanate with polydopamine and copper, the ultrasound-activated piezo-hot carriers transfer easily to copper by polydopamine. It boosts reactive oxygen species production by piezoelectrics, and facilitates the interconversion between Cu2+ and Cu+ to promote hydroxyl radical generation via Cu+ -catalyzed chemodynamic reactions. Finally, the elevated reactive oxygen species cause bacterial membrane structure loosening and DNA damage. Transcriptomics and metabolomics analysis reveal that intracellular copper overload restricts the tricarboxylic acid cycle, promoting bacterial cuproptosis-like death. Therefore, the polyetherketoneketone scaffold engineered with the designed nanoreactor shows excellent antibacterial performance with ultrasound stimulation and promotes angiogenesis and osteogenesis on-demand in vivo.

Recent Development and Applications of Polydopamine in Tissue Repair and Regeneration Biomaterials

The various tissue damages are a severe problem to human health. The limited human tissue regenerate ability requires suitable biomaterials to help damage tissue repair and regeneration. Therefore, many researchers devoted themselves to exploring biomaterials suitable for tissue repair and regeneration. Polydopamine (PDA) as a natural and multifunctional material which is inspired by mussel has been widely applied in different biomaterials. The excellent properties of PDA, such as strong adhesion, photothermal and high drug-loaded capacity, seem to be born for tissue repair and regeneration. Furthermore, PDA combined with different materials can exert unexpected effects. Thus, to inspire researchers, this review summarizes the recent and representative development of PDA biomaterials in tissue repair and regeneration. This article focuses on why apply PDA in these biomaterials and what PDA can do in different tissue injuries.

Surface Modification Progress for PLGA-Based Cell Scaffolds

Poly(lactic-glycolic acid) (PLGA) is a biocompatible bio-scaffold material, but its own hydrophobic and electrically neutral surface limits its application as a cell scaffold. Polymer materials, mimics ECM materials, and organic material have often been used as coating materials for PLGA cell scaffolds to improve the poor cell adhesion of PLGA and enhance tissue adaptation. These coating materials can be modified on the PLGA surface via simple physical or chemical methods, and coating multiple materials can simultaneously confer different functions to the PLGA scaffold; not only does this ensure stronger cell adhesion but it also modulates cell behavior and function. This approach to coating could facilitate the production of more PLGA-based cell scaffolds. This review focuses on the PLGA surface-modified materials, methods, and applications, and will provide guidance for PLGA surface modification.

Exploring the potential of the nano-based sunscreens and antioxidants for preventing and treating skin photoaging

Excessive exposure to sunlight, especially UV irradiation, causes skin photodamage. Sunscreens, such as TiO2 and ZnO, can potentially prevent UV via scattering, reflection, and absorption. Topical antioxidants are another means of skin photoprotection. Developing nanoparticles for sunscreens and antioxidants is recommended for photoaging prevention and treatment as it can improve uncomfortable skin appearance, stability, penetration, and safety. This study reviewed the effects of nano-sized sunscreens and antioxidants on skin photoprevention by examining published studies and articles from PubMed, Scopus, and Google Scholar, which explore the topics of skin photoaging, skin senescence, UV radiation, keratinocyte, dermal fibroblast, sunscreen, antioxidant, and nanoparticle. The researchers of this study also summarized the nano-based UV filters and therapeutics for mitigating skin photoaging. The skin photodamage mechanisms are presented, followed by the introduction of current skin photoaging treatment. The different nanoparticle types used for topical delivery were also explored in this study. This is followed by the mechanisms of how nanoparticles improve the UV filters and antioxidant performance. Lastly, recent investigations were reviewed on nanoparticulate sunscreens and antioxidants in skin photoaging management. Sunscreens and antioxidants for topical application have different concepts. Topical antioxidants are ideal for permeating into the skin to exhibit free radical scavenging activity, while UV filters are prescribed to remain on the skin surface without absorption to exert the UV-blocking effect without causing toxicity. The nanoparticle design strategy for meeting the different needs of sunscreens and antioxidants is also explored in this study. Although the benefits of using nanoparticles for alleviating photodamage are well-established, more animal-based and clinical studies are necessary.

Polydopamine-Derived Carbon Catalysts with Optimized Structure-Activity Design towards Electrochemical CO2 Reduction to CO

Electrochemical reduction of CO2 into chemical feedstocks has been regarded as an attractive way to reconstruct the carbon cycle. In this work, nitrogen-doped carbon was prepared by high temperature pyrolysis using polydopamine (PDA) microspheres as precursors. The effects of doped nitrogen units, surface hydrophilicity and pore structures of the N-Carbon catalysts on the CO2 reduction reaction (CO2 RR) activities were systematically investigated. It was demonstrated that the competition between the hydrogen evolution reaction (HER) and the CO2 RR under reduction potentials was modified by the nature of surface hydrophilicity/hydrophobicity and the doped nitrogen units. The CO2 RR activities were further optimized via the pore structures regulation. Results showed that pore structure with size below 1 nm was favorable for CO2 RR and the developed N-Carbon catalysts with optimized nitrogen units, hydrophilicity, and pore structure achieved a high CO2 to CO Faradaic efficiency of 95 % in the H-cell.

Insight into the Antioxidant Activity of 1,8-Dihydroxynaphthalene Allomelanin Nanoparticles

Melanins are stable and non-toxic pigments with great potential as chemopreventive agents against oxidative stress for medical and cosmetic applications. Allomelanin is a class of nitrogen-free melanin often found in fungi. The artificial allomelanin obtained by the polymerization of 1,8-dihydroxynaphthalene (DHN), poly-DHN (PDHN), has been recently indicated as a better radical quencher than polydopamine (PDA), a melanin model obtained by the polymerization of dopamine (DA); however, the chemical mechanisms underlying this difference are unclear. Here we investigate, by experimental and theoretical methods, the ability of PDHN nanoparticles (PDHN-NP), in comparison to PDA-NP, to trap alkylperoxyl (ROO•) and hydroperoxyl (HOO•) radicals that are involved in the propagation of peroxidation in real conditions. Our results demonstrate that PDHN-NP present a higher antioxidant efficiency with respect to PDA-NP against ROO• in water at pH 7.4 and against mixed ROO• and HOO• in acetonitrile, showing catalytic cross-termination activity. The antioxidant capacity of PDHN-NP in water is 0.8 mmol/g (ROO• radicals quenched by 1 g of PDHN-NP), with a rate constant of 3 × 105 M-1 s-1 for each reactive moiety. Quantum-mechanical calculations revealed that, thanks to the formation of a H-bond network, the quinones in PDHN-NP have a high affinity for H-atoms, thus justifying the high reactivity of PDHN-NP with HOO• observed experimentally.

Structural elucidation of polydopamine facilitated by ionic liquid solvation

Minimal understanding of the formation mechanism and structure of polydopamine (pDA) and its natural analogue, eumelanin, impedes the practical application of these versatile polymers and limits our knowledge of the origin of melanoma. The lack of conclusive structural evidence stems from the insolubility of these materials, which has spawned significantly diverse suggestions of pDA's structure in the literature. We discovered that pDA is soluble in certain ionic liquids. Using these ionic liquids (ILs) as solvents, we present an experimental methodology to solvate pDA, enabling us to identify pDA's chemical structure. The resolved pDA structure consists of self-assembled supramolecular aggregates that contribute to the increasing complexity of the polymer. The underlying molecular energetics of pDA solvation and a macroscopic picture of the disruption of the aggregates using IL solvents have been investigated, along with studies of the aggregation mechanism in water.

Fabrication and properties of multi-functional polydopamine coated Cu/F-codoped hydroxyapatite hollow microspheres as drug carriers

Due to its excellent bone conductivity and drug adsorption as well as pH-responsive drug release property, hydroxyapatite (HAp) is widely used as a drug carrier in bone repair field. Here, we report for the first time a novel multi-functional polydopamine (PDA) coated Cu/F-codoped HAp (Cu/F-HAp-PDA) hollow microspheres. Both Cu²⁺ and F^- were successfully doped into the lattice of HAp and uniformly distributed in the shell of hollow microspheres through a one-step hydrothermal synthesis. Then PDA was coated homogeneously on the outer layer of Cu/F-HAp hollow microspheres. Both Cu/F-HAp and Cu/F-HAp-PDA samples displayed high drug loading efficiency and pH responsive drug release behavior. Moreover, the obtained Cu/F-HAp-PDA hollow microspheres exhibited excellent photothermal conversion efficiency and photothermal stability. The molecular dynamics simulations showed that PDA and HAp can form mutual binding mainly through Ca-O bonding, while doxorubicin (DOX) is mainly bound to PDA molecules through hydrogen bonding and π-π stacking interaction.

Ultra-small polydopamine nanomedicine-enabled antioxidation against senescence

Senescence is a cellular response characterized by cells irreversibly stopping dividing and entering a state of permanent growth arrest. One of the underlying pathophysiological causes of senescence is the oxidative stress-induced damage, indicating that eliminating the reactive oxygen and nitrogen species (RONS) may be beneficial to prevent and/or alleviate senescence. Herein, we developed ultra-small polydopamine nanoparticles (UPDA NPs) with superoxide dismutase (SOD)/catalase (CAT) enzyme-mimic activities, featuring broad-spectrum RONS-scavenging capability for inducing cytoprotective effects against RONS-mediated damage. The engineered UPDA NPs can restore senescence-related renal function, tissue homeostasis, fur density, and motor ability in mice, potentially associated with the regulation of multiple genes involved in lipid metabolism, mitochondrial function, energy homeostasis, telomerase activity, neuroprotection, and inflammatory responses. Importantly, the dietary UPDA NPs can enhance the antioxidant capacity, improve the climbing ability, and prolong the lifespan of Drosophila. Notably, UPDA NPs possess excellent biocompatibility stemming from the ultra-small size, ensuring quick clearance out of the body. These findings reveal that UPDA NPs can delay aging through reducing oxidative stress and provide a paradigm and practical strategy for treating senescence and senescence-related diseases.

Zwitterionic coating assisted by dopamine with metal-phenolic networks loaded on titanium with improved biocompatibility and antibacterial property for artificial heart

Introduction: Titanium (Ti) and Ti-based alloy materials are commonly used to develop artificial hearts. To prevent bacterial infections and thrombus in patients with implanted artificial hearts, long-term prophylactic antibiotics and anti-thrombotic drugs are required, and this may lead to health complications. Therefore, the development of optimized antibacterial and antifouling surfaces for Ti-based substrate is especially critical when designing artificial heart implants. Methods: In this study, polydopamine and poly-(sulfobetaine methacrylate) polymers were co-deposited to form a coating on the surface of Ti substrate, a process initiated by Cu²⁺ metal ions. The mechanism for the fabrication of the coating was investigated by coating thickness measurements as well as Ultraviolet-visible and X-ray Photoelectron (XPS) spectroscopy. Characterization of the coating was observed by optical imaging, scanning electron microscope (SEM), XPS, atomic force microscope (AFM), water contact angle and film thickness. In addition, antibacterial property of the coating was tested using Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) as model strains, while the material biocompatibility was assessed by the antiplatelet adhesion test using platelet-rich plasma and in vitro cytotoxicity tests using human umbilical vein endothelial cells and red blood cells. Results and discussion: Optical imaging, SEM, XPS, AFM, water contact angle, and film thickness tests demonstrated that the coating was successfully deposited on the Ti substrate surface. The biocompatibility and antibacterial assays showed that the developed surface holds great potential for improving the antibacterial and antiplatelet adhesion properties of Ti-based heart implants.

Molecular Dynamics Simulations of Polydopamine Nanosphere's Structure Based on Experimental Evidence

In this work, we show how to obtain internal monodispersed gold nanoparticles inside polydopamine (PDA) nanospheres that are also externally decorated with gold. The number of internal nanoparticles is affected by the size of the PDA nanosphere used, and the lower limit in the number of gold nanoparticles in the center of decorated nanospheres, one single gold nanoparticle, has been reached. In addition, extensive molecular dynamics simulations of PDA nanospheres based on four different chemical motifs, in the presence of water and with different sizes, have been performed to gain insight into the arrangements capable of accommodating cavities. In particular, PDA nanospheres based on pyranoacridinotrione (PYR) units provide good agreement with the experimental attainment of internal metal nanoparticles. In these, the stacking of PYR units leads to a particular morphology, with large portions of space occupied by the solvent, that would explain the observed formation of gold nanoparticles inside the PDA nanosphere.

Structural Investigation of DHICA Eumelanin Using Density Functional Theory and Classical Molecular Dynamics Simulations

Eumelanin is an important pigment, for example, in skin, hair, eyes, and the inner ear. It is a highly heterogeneous polymer with 5,6-dihydroxyindole-2-carboxylic acid (DHICA) and 5,6-dihydroxyindole (DHI) building blocks, of which DHICA is reported as the more abundant in natural eumelanin. The DHICA-eumelanin protomolecule consists of three building blocks, indole-2-carboxylic acid-5,6-quinone (ICAQ), DHICA and pyrrole-2,3,5-tricarboxylic acid (PTCA). Here, we focus on the self-assembly of DHICA-eumelanin using multi-microsecond molecular dynamics (MD) simulations at various concentrations in aqueous solutions. The molecule was first parameterized using density functional theory (DFT) calculations. Three types of systems were studied: (1) uncharged DHICA-eumelanin, (2) charged DHICA-eumelanin corresponding to physiological pH, and (3) a binary mixture of both of the above protomolecules. In the case of uncharged DHICA-eumelanin, spontaneous aggregation occurred and water molecules were present inside the aggregates. In the systems corresponding to physiological pH, all the carboxyl groups are negatively charged and the DHICA-eumelanin model has a net charge of -4. The effect of K+ ions as counterions was investigated. The results show high probability of binding to the deprotonated oxygens of the carboxylate anions in the PTCA moiety. Furthermore, the K+ counterions increased the solubility of DHICA-eumelanin in its charged form. A possible explanation is that the charged protomolecules favor binding to the K+ ions rather than aggregating and binding to other protomolecules. The binary mixtures show aggregation of uncharged DHICA-eumelanins; unlike the charged systems with no aggregation, a few charged DHICA-eumelanins are present on the surface of the uncharged aggregation, binding to the K+ ions.

Ultrafast deposition of polydopamine for high-performance fiber-reinforced high-temperature ceramic composites

The low deposition time efficiency and small thickness limit the expansion of polydopamine (PDA) application to fiber-reinforced high-temperature ceramic composites. In this work, the electric field-assisted polymerization (EFAP) route was developed to improve the deposition time efficiency of PDA coating and overcome the thickness limitation. Carbonized polydopamine (C-PDA) coating was used as the interphase of carbon fiber-reinforced ZrB2-based composites (Cf/ZrB2-based composite) to bond rigid fibers and brittle ceramics, where C-PDA coating was prepared by the carbonization of PDA coating. Firstly, uniform and dense PDA coatings were deposited on carbon fibers (Cf) by EFAP. The thickness of PDA coating reached the micron level (over 1800 nm) for the first time. Benefiting from the EFAP route promoting the oxidation process of dopamine (DA) and accelerating the aggregation and in-situ polymerization of DA and its derivatives on the surface of Cf, the deposition rate of PDA coating reached 5589 nm/h, which was 3 orders of magnitude higher than that of the traditional self-polymerization process. By adjusting the EFAP parameters (e.g. DA-concentration, current, and deposition time), the thickness of PDA coating could be conveniently designed from nano-scale to micro-scale. Then, PDA coating was pyrolyzed to obtain C-PDA coating. C-PDA coating was well bonded on Cf without visible cross-sticking among neighboring fibers. C-PDA coating presented a layered structure and the thickness of C-PDA coating could be designed by controlling the thickness of PDA. C-PDA coating was used as the interfacial phase of the Cf/ZrB2-based composite, which ensured that the composite possessed good load-bearing capacity and thermal stability. Moreover, extraordinary damage resistance of the composite was achieved, with work of fracture up to 9936 ± 548 J/m2 at room temperature and 19,082 ± 3458 J/m2 at 1800 °C. The current work provides a high time efficiency processing route for depositing PDA coating on carbon fibers and demonstrates the attractive potential of PDA coating in fiber-reinforced high-temperature ceramic composites.

Polyester-Polydopamine Copolymers for Intravitreal Drug Delivery: Role of Polydopamine Drug-Binding Properties in Extending Drug Release

This work reports on a novel polyester copolymer containing poly(dopamine), a synthetic analogue of natural melanin, evaluated in a sustained-release drug delivery system for ocular intravitreal administration of drugs. More specifically, a graft copolymer of poly(ε-caprolactone)-graft-poly(dopamine) (PCL-g-PDA) has been synthesized and was shown to further extend the drug release benefits of state-of-the-art biodegradable intravitreal implants composed of poly(lactide) and poly(lactide-co-glycolide). The innovative biomaterial combines the documented drug-binding properties of melanin naturally present in the eye, with the established ocular tolerability and biodegradation of polyester implants. The PCL-g-PDA copolymer was obtained by a two-step modification of PCL with a final PDA content of around 2-3 wt % and was fully characterized by size exclusion chromatography, NMR, and diffusion ordered NMR spectroscopy. The thermoplastic nature of PCL-g-PDA allowed its simple processing by hot-melt compression molding to prepare small implants. The properties of unmodified PCL and PCL-g-PDA implants were studied and compared in terms of thermal properties (differential scanning calorimetry), thermal stability (thermogravimetry analysis), degradability, and in vitro cytotoxicity. PCL and PCL-g-PDA implants exhibited similar degradation properties in vitro and were both stable under physiological conditions over 110 days. Likewise, both materials were non-cytotoxic toward L929 and ARPE-19 cells. The drug loading and in vitro release properties of the new materials were investigated with dexamethasone (DEX) and ciprofloxacin hydrochloride (CIP) as representative drugs featuring low and high melanin-binding affinities, respectively. In comparison to unmodified PCL, PCL-g-PDA implants showed a significant extension of drug release, most likely because of specific drug-catechol interaction with the PDA moieties of the copolymer. The present study confirms the advantages of designing PDA-containing polyesters as a class of biodegradable and biocompatible thermoplastics that can modulate and remarkably extend the drug release kinetics thanks to their unique drug-binding properties, especially, but not limited to, for ocular applications.

Dopamine/DOPAC-assisted immobilization of bone morphogenetic protein-2 loaded Heparin/PEI nanogels onto three-dimentional printed calcium phosphate ceramics for enhanced osteoinductivity and osteogenicity

Nowadays, the three-dimensional (3D) printed calcium phosphate (CaP) ceramics have well-designed geometric structure, but suffer from relative weak osteoinductivity. Surface modification by incorporating bone morphogenetic protein-2 (BMP2) onto scaffolds is considered as an efficient approach to improve their bioactivity. However, high dose and uncontrolled burst release of BMP2 may cause undesired side effect. In the present study, porous BCP ceramics with inverse face-centred cube structure prepared by digital light processing (DLP)-based 3D printing technique were used as the substrates. BMP2 proteins were loaded in the self-assembled Heparin/PEI nanogels (NP/BMP2), and then immobilized onto BCP substrates through the intermediate mussel-derived bioactive dopamine and dihydroxyphenylacetic acid (DA/DOPAC) coating layers to construct functional BCP/layer/NP/BMP2 scaffolds. Our results showed that Heparin/PEI nanogel was a potent delivery system for BMP2, and BCP/layer/NP/BMP2 scaffolds exhibited the high loading capacity, controlled release rate, and sustained local delivery of BMP2. In vitro cell experiments with bone marrow stromal cells (BMSCs) found that BCP/layer/NP/BMP2 could promote cell proliferation, facilitate cell spreading, accelerate cell migration, up-regulate expression of osteogenic genes, and improve synthesis of osteoblast-related proteins. Moreover, the murine intramuscular implantation model suggested that BCP/layer/NP/BMP2 had a superior osteoinductive capacity, and the rat femoral condyle defect repair model showed that BCP/layer/NP/BMP2 could enhance in situ bone repair and regeneration. These findings demonstrate that the incorporation of BMP2 loaded Heparin/PEI nanogels to 3D printed scaffolds holds great promise in fabricating bone graft with a superior biological performance for orthopedic application.

Impact of Polydopamine Nanoparticle Surface Pattern and Roughness on Interactions with Poly(ethylene glycol) in Aqueous Solution: A Multiscale Modeling and Simulation Study

A significant research effort in the past few years has been devoted to engineering synthetic mimics of naturally occurring eumelanin. One such effort has involved the assembly of oligomers of 5,6-dihydroxyindole (DHI), a synthetic precursor of polydopamine (PDA), into melanin-mimicking nanoparticles for use in a variety of applications with desired optical, photonic, thermal, and electrical properties. In many of these applications, the PDA nanoparticles are mixed with other polymers or oligomers, thus motivating this specific study to understand how the surface characteristics of the assembled PDA-nanoparticles affect their interaction with poly(ethylene glycol) (PEG) chains in aqueous solution. We use molecular dynamics (MD) simulations to study the interaction of linear 20-mer PEG chains with different PDA-nanoparticles assembled using four types of oligomers of 5,6-DHI: two isomers of 5,6-DHI 2-mers with the monomers bonding either at the 2-2' position (A-type isomer) or 7-7' position (B-type isomer), denoted as A:2-mer and B:2-mer, respectively, and a 4-mer and an 8-mer of B-type chemistry denoted as B:4-mer and B:8-mer, respectively. Using explicit-solvent atomistic MD simulations, we find that PDA-nanoparticle surfaces assembled from B:8-mer exhibit smaller density fluctuations of water molecules and, as a result, are relatively more hydrophilic than the PDA-nanoparticle surfaces assembled from A:2-mer, B:2-mer, and B:4-mer. The surface composition of PDA-nanoparticles assembled from A:2-mer contains relatively fewer hydroxyl (-OH) groups compared to PDA-nanoparticles assembled from a B:2-mer, B:4-mer, or B:8-mer, yet the sample of PEG chains show more collapsed and adsorbed conformations on A:2-mer nanoparticles' surface. To explain the atomistically observed behavior of PEG chains on the nanoparticles' surfaces, we use coarse-grained (CG) MD simulations and explain the roles of the pattern formed by the attractive sites (e.g.,-OH groups) exposed on the surface and the roughness of the surface on interactions with a genric PEG-like copolymer chain. By comparing atomistic and CG MD simulation results, we confirm that the -OH groups' pattern on the surface of the PDA-nanoparticle assembled from A:2-mer is patchier than the random or string-like patterns on the PDA-nanoparticle assembled from B:2-mer, B:4-mer, or B:8-mer, and it is this -OH groups' surface pattern that dictates the PEG chain conformations and adsorption on the PDA-nanoparticle surface. Overall, these results guide the design of chemically and physically heterogeneous nanoparticle surfaces for the desired polymer interaction and conformations.

Anti-Pectin Fouling Performance of Dopamine and (3-Aminopropy) Triethoxysilane-Coated PVDF Ultrafiltration Membrane

Due to the diversity and complexity of the components in traditional Chinese medicine (TCM) extracts, serious membrane fouling has become an obstacle that limits the application of membrane technology in TCM. Pectin, a heteropolysaccharide widely existing in plant cells, is the main membrane-fouling substance in TCM extracts. In this study, a hydrophilic hybrid coating was constructed on the surface of a polyvinylidene fluoride (PVDF) ultrafiltration (UF) membrane co-deposited with polydopamine (pDA) and (3-Aminopropy) triethoxysilane (KH550) for pectin antifouling. Characterization analysis showed that hydrophilic coating containing hydrophilic groups (–NH₃, Si-OH, Si-O-Si) formed on the surface of the modified membrane. Membrane filtration experiments showed that, compared with a matched group (FRR: 28.66%, Rr: 26.87%), both the flux recovery rate (FRR) and reversible pollution rate (Rr) of the pDA and KH550 coated membrane (FRR: 48.07%, Rr: 44.46%) increased, indicating that pectin absorbed on the surface of membranes was more easily removed. Based on the extended Derjaguin–Laudau–Verwey–Overbeek (XDLVO) theory, the fouling mechanism of a PVDF UF membrane caused by pectin was analyzed. It was found that, compared with the pristine membrane (144.21 kT), there was a stronger repulsive energy barrier (3572.58 kT) to confront the mutual adsorption between the coated membrane and pectin molecule. The total interface between the modified membrane and the pectin molecule was significantly greater than the pristine membrane. Therefore, as the repulsion between them was enhanced, pectin molecules were not easily adsorbed on the surface of the coated membrane.

Dopamine Photochemical Behaviour under UV Irradiation

To understand the photochemical behaviour of the polydopamine polymer in detail, one would also need to know the behaviour of its building blocks. The electronic absorption, as well as the fluorescence emission and excitation spectra of the dopamine were experimentally and theoretically investigated considering time-resolved fluorescence spectroscopy and first-principles quantum theory methods. The shape of the experimental absorption spectra obtained for different dopamine species with standard, zwitterionic, protonated, and deprotonated geometries was interpreted by considering the advanced equation-of-motion coupled-cluster theory of DLPNO-STEOM. Dynamical properties such as fluorescence lifetimes or quantum yield were also experimentally investigated and compared with theoretically predicted transition rates based on Fermi's Golden Rule-like equation. The results show that the photochemical behaviour of dopamine is strongly dependent on the concentration of dopamine, whereas in the case of a high concentration, the zwitterionic form significantly affects the shape of the spectrum. On the other hand, the solvent pH is also a determining factor for the absorption, but especially for the fluorescence spectrum, where at lower pH (5.5), the protonated and, at higher pH (8.0), the deprotonated forms influence the shape of the spectra. Quantum yield measurements showed that, besides the radiative deactivation mechanism characterized by a relatively small QY value, non-radiative deactivation channels are very important in the relaxation process of the electronic excited states of different dopamine species.

Complexes of Alkaline and Ammonium Cations with Dopamine and Eumelanin Precursors: Dissecting the Role of Noncovalent Cation-π and Cation-Lone Pair (σ-Type) Interactions

Cation-π interactions and their possible competition with other noncovalent interactions (NCI) might play a key role in both dopamine- and eumelanin-based bioinspired materials. In this contribution, to unravel the delicate interplay between cation-π interactions and other possible competing forces, the configurational space of noncovalent complexes formed by dopamine or eumelanin precursors (o-benzoquinone, DHI and a semiquinone dimer) and three different cations (Na⁺, K⁺, and NH₄⁺) is sampled by means of accurate ab initio calculations. To this end, we resort to the mp2^mod method, recently validated by us for benzene-, phenol-, and catechol-cation complexes, whose computational convenience allows for an extensive exploration of the cation-molecule interaction energy surface, by sampling a total of more than 10⁴ arrangements. The mp2^mod interaction energy landscapes reveal that, besides the expected cation-π driven arrangements, for all considered molecule-cation pairs the most stable complexes are found when the cation lies within the plane containing the six-membered ring, thus maximizing the σ-type interaction with the oxygen's lone pairs. Due to the loss of aromaticity, the σ-type/cation-π strength ratio is remarkably large in o-benzoquinone, where cation-π complexes seem unlikely to be formed. The above features are shared among all considered cations but are significantly larger when considering the smaller Na⁺. Besides delivering a deeper insight onto the NCI network established by the considered precursors in the presence of ions, the present results can serve as a reference database to validate or refine lower level methods, as, for instance, the force fields employed in classical simulations.

Exciton interactions in helical crystals of a hydrogen-bonded eumelanin monomer

Eumelanin, a naturally occurring group of heterogeneous polymers/aggregates providing photoprotection to living organisms, consist of 5,6-dihydroxyindole (DHI) and 5,6-dihydroxyindole-2-carboxylic acid (DHICA) building blocks. Despite their prevalence in the animal world, the structure and therefore the mechanism behind the photoprotective broadband absorption and non-radiative decay of eumelanin remain largely unknown. As a small step towards solving the incessant mystery, DHI is crystallized in a non-protic solvent environment to obtain DHI crystals having a helical packing motif. The present approach reflects the solitary directional effect of hydrogen bonds between the DHI chromophores for generating the crystalline assembly and filters out any involvement of the surrounding solvent environment. The DHI single crystals having an atypical chiral packing motif (P212121 Sohncke space group) incorporate enantiomeric zig-zag helical stacks arranged in a herringbone fashion with respect to each other. Each of the zig-zag helical stacks originates from a bifurcated hydrogen bonding interaction between the hydroxyl substituents in adjacent DHI chromophores which act as the backbone structure for the helical assembly. Fragment-based excited state analysis performed on the DHI crystalline assembly demonstrates exciton delocalization along the DHI units that connect each enantiomeric helical stack while, within each stack, the excitons remain localized. Fascinatingly, over the time evolution for generation of single-crystals of the DHI-monomer, mesoscopic double-helical crystals are formed, possibly attributed to the presence of covalently connected DHI trimers in chloroform solution. The oligomeric DHI (in line with the chemical disorder model) along with the characteristic crystalline packing observed for DHI provides insights into the broadband absorption feature exhibited by the chromophore.

Revisiting the adhesion mechanism of mussel-inspired chemistry

Mussel-inspired chemistry has become an ideal platform to engineer a myriad of functional materials, but fully understanding the underlying adhesion mechanism is still missing. Particularly, one of the most pivotal questions is whether catechol still plays a dominant role in molecular-scale adhesion like that in mussel adhesive proteins. Herein, for the first time, we reveal an unexplored adhesion mechanism of mussel-inspired chemistry that is strongly dictated by 5,6-dihydroxyindole (DHI) moieties, amending the conventional viewpoint of catechol-dominated adhesion. We demonstrate that polydopamine (PDA) delivers an unprecedented adhesion of 71.62 mN m-1, which surpasses that of many mussel-inspired derivatives and is even 121-fold higher than that of polycatechol. Such a robust adhesion mainly stems from a high yield of DHI moieties through a delicate synergy of leading oxidation and subsidiary cyclization within self-polymerization, allowing for governing mussel-inspired adhesion by the substituent chemistry and self-polymerization manner. The adhesion mechanisms revealed in this work offer a useful paradigm for the exploitation of functional mussel-inspired materials.

Enhanced Photoacoustic Detection of Heparin in Whole Blood via Melanin Nanocapsules Carrying Molecular Agents

Photoacoustic (PA) imaging has proved versatile for many biomedical applications from drug delivery tracking to disease diagnostics and postoperative surveillance. It recently emerged as a tool for accurate and real-time heparin monitoring to avoid bleeding complications associated with anticoagulant therapy. However, molecular-dye-based application is limited by high concentration requirements, photostability, and a strong background hemoglobin signal. We developed polydopamine nanocapsules (PNCs) via supramolecular templates and loaded them with molecular dyes for enhanced PA-mediated heparin detection. Depending on surface charge, the dye-loaded PNCs undergo disassembly or aggregation upon heparin recognition: both experiments and simulation have revealed that the increased PA signal mainly results from dye-loaded PNC-heparin aggregation. Importantly, Nile blue (NB)-loaded PNCs generated a 10-fold higher PA signal than free NB dye, and such PNC enabled the direct detection of heparin in a clinically relevant therapeutic window (0-4 U/mL) in whole human blood (R² = 0.91). Furthermore, the PA signal of PNC@NB obtained from 17 patients linearly correlated with ACT values (R² = 0.73) and cumulative heparin (R² = 0.83). This PNC-based strategy for functional nanocapsules offers a versatile engineering platform for robust biomedical contrast agents and nanocarriers.

Combined photothermal-photodynamic therapy by indocyanine green loaded polydopamine nanoparticles enhances anti-mammary gland tumor efficacy

Various nano-targeted drug delivery systems have been developed for combined photothermal-photodynamic (PTT-PDT) treatment for tumors due to the better outcomes compared with monomodality. Here, we constructed a facile two-step method...

Nickel/Brønsted acid dual-catalyzed regioselective C–H bond allylation of phenols with 1,3-dienes

A nickel/Brønsted acid dual-catalyzed C-H bond ortho-allylation of phenols with 1,3-dienes has been developed. This methodology is readily applicable to the modification of complex pharmaceutical molecules.

Fingerprint-based deep neural networks can model thermodynamic and optical properties of eumelanin DHI dimers

Eumelanin is the biopolymer responsible for photoprotection in living beings and holds great promise as a smart biomaterial, but its detailed structure has not been characterized experimentally. Theoretical models are urgently needed to improve our knowledge of eumelanin's function and exploit its properties, but the enormous amount of possible oligomer components has made modelling not possible until now. Here we show that the stability and lowest vertical optical absorption of 5,6-dihydroxyindole (DHI) eumelanin dimer components can be modeled with deep neural networks, using fingerprint-like molecular representations as input. In spite of the modest data set size, average errors of only 6 and 9% for stability and S₁ absorption energy are obtained. Our fingerprints code the connectivity and oxidation patterns of the dimers in a straightforward, unambiguous way and can be extended to larger oligomers. This proof-of-principle work shows that machine learning can be applied to help solve the structural challenge of melanin.

Solving the challenge of melanin structure is important to realize its potential as smart biomaterial. By modeling the properties of eumelanin dimers we show that machine learning can be used to solve this problem.

Expanding the spectrum of polydopamine antioxidant activity by nitroxide conjugation

Polydopamine (PDA) materials are important due to their unique physicochemical properties and their potential as chemopreventive agents for diseases connected with oxidative stress. Although PDA has been suggested to display antioxidant activity, its efficacy is controversial and its mechanism of action is still unclear. Herein, we report that accurately purified PDA nanoparticles in water at pH 7.4 are unable to quench alkylperoxyls (ROO˙), which are the radicals responsible for the propagation of lipid peroxidation, despite PDA reacting with the model DPPH˙ and ABTS˙⁺ radicals. PDA nanoparticles prepared by copolymerization of dopamine with the dialkyl nitroxide 4-NH₂TEMPO show instead good antioxidant activity, thanks to the ROO˙ trapping ability of the nitroxide. Theoretical calculations performed on a quinone-catechol dimer, reproducing the structural motive of PDA, indicate a reactivity with ROO˙ similar to catechol. These results suggest that PDA nanoparticles have an "onion-like" structure, with a catechol-rich core, which can be reached only by DPPH˙ and ABTS˙⁺, and a surface mainly represented by quinones. The importance of assessing the antioxidant activity by inhibited autoxidation studies is also discussed.

Water-Activated Semiquinone Formation and Carboxylic Acid Dissociation in Melanin Revealed by Infrared Spectroscopy

Eumelanin is a widespread biomacromolecule pigment in the biosphere and has been widely investigated for numerous bioelectronics and energetic applications. Many of these applications depend on eumelanin's ability to conduct proton current at various levels of hydration. The origin of this behavior is connected to a comproportionation reaction between oxidized and reduced monomer moieties and water. A hydration-dependent FTIR spectroscopic study on eumelanin is presented herein, which allows for the first time tracking the comproportionation reaction via the gradual increase of the overall aromaticity of melanin monomers in the course of hydration. We identified spectral features associated with the presence of specific "one and a half" C𝌁O bonds, typical for o-semiquinones. Signatures of semiquinone monomers with internal hydrogen bonds and that carboxylic groups, in contrast to semiquinones, begin to dissociate at the very beginning of melanin hydration were indicated. As such, we suggest a modification to the common hydration-dependent conductivity mechanism and propose that the conductivity at low hydration is dominated by carboxylic acid protons, whereas higher hydration levels manifest semiquinone protons.

Injectable antimicrobial hydrogels with antimicrobial peptide and sanguinarine controlled release ability for preventing bacterial infections

The emergence of antibiotic resistant bacteria represents a significant and common clinical problem worldwide as infections are becoming increasingly common. It is urgent to broaden the sources of biomaterials that can prevent both bacterial infection and antibiotic resistance. In this work, oxidized sodium alginate/aminated hyaluronic acid (OSA/AHA) hydrogel with various proportions was developed based on Schiff base reaction. Herein, polydopamine (PDA)-Bmkn2 nanoparticle and sanguinarine were incorporated into hydrogels to enhance antibacterial properties. The prepared PDA-Bmkn2 nanoparticles, with uniform particle size and good dispersion, could serve as a delivery system for Bmkn2. The prepared hydrogels showed appropriate swelling ratio, extremely good mechanical strengths and improved biodegradability. Meanwhile, the Bmkn2 and sanguinarine were released from the hydrogels in a sustainable manner. Furthermore, OSA/AHA/sanguinarine/PDA-Bmkn2 hydrogel (less than 10 μg/mL BmKn2 and 0.2 μg/mL sanguinarine) had excellent biocompatibility. Antibacterial experiments confirmed that OSA/AHA/sanguinarine/PDA-Bmkn2 hydrogel had effective antimicrobial activity on Escherichia coli and Staphylococcus aureus. Therefore, the prepared injectable hydrogels with good biocompatibility and excellent synergistic antibacterial activity promise great potential for preventing localized bacterial infections.

Interfacial water morphology in hydrated melanin

The importance of electrically functional biomaterials is increasing as researchers explore ways to utilise them in novel sensing capacities. It has been recognised that for many of these materials the state of hydration is a key parameter that can heavily affect the conductivity, particularly those that rely upon ionic or proton transport as a key mechanism. However, thus far little attention has been paid to the nature of the water morphology in the hydrated state and the concomitant ionic conductivity. Presented here is an inelastic neutron scattering (INS) experiment on hydrated eumelanin, a model bioelectronic material, in order to investigate its 'water morphology'. We develop a rigorous new methodology for performing hydration dependent INS experiments. We also model the eumelanin dry spectra with a minimalist approach whereas for higher hydration levels we are able to obtain difference spectra to extract out the water scattering signal. A key result is that the physi-sorbed water structure within eumelanin is dominated by interfacial water with the number of water layers between 3-5, and no bulk water. We also detect for the first time, the potential signatures for proton cations, most likely the Zundel ion, within a biopolymer/water system. These new signatures may be general for soft proton ionomer systems, if the systems are comprised of only interfacial water within their structure. The nature of the water morphology opens up new questions about the potential ionic charge transport mechanisms within hydrated bioelectronics materials.

Colorful Pigments for Hair Dyeing Based on Enzymatic Oxidation of Tyrosine Derivatives

Melanin exists widely in nature and can afford a variety of colors from black to brown and red according to chemical structure differences and specific mixtures. Inspired by nature, this work reports that tyrosine derivatives with different protecting groups at its N- or C-terminal can be enzymatically oxidized into melanin-like pigments with a wide range of colors. The emergence of colorful pigments can be attributed to the incomplete enzymatic oxidation and polymerization caused by the chemical premodification of the tyrosine molecule. The pigments can be deposited on the surface of the hair to obtain a series of colorful and saturated hair dye effects. Moreover, after the pigments were coated on the hair, we can further deposit silver nanoparticles through in situ reduction, making these coatings have anti-inflammatory and antibacterial potential, thereby expanding their potential use for people with low immunity or those who work in hospitals. This work proposes a green and effective way to synthesize colorful pigments with great potential applications in the hair dying and cosmetic industries.

Stability and Optical Absorption of a Comprehensive Virtual Library of Minimal Eumelanin Oligomer Models*

Eumelanin is responsible for photoprotection in living organisms. It is made of 5,6‐dihydroxyindole (DHI) oligomers. However, lack of detailed structural knowledge limits understanding its function and exploiting its potential in material science. To uncover the relationship between structural stability and optical properties, we have studied a virtual library of 830 DHI dimers. We find a preference for oxidized, polycyclic structures which speaks in favor of graphite‐like structures for the larger oligomers, and propose an electrocyclic formation mechanism. Besides widely considered quinone oxidation patterns, also structures with interfragment double bonds and zwitterionic resonance structures are stable. Future theoretical melanine models will have to cover this diversity, and we introduce a new representative set of 49 stable dimers. Some stable oxidized dimers have absorption energies as low as 1.3 eV. They may be present as substructures in the naturally found oligomers and contribute to the absorption spectrum of the biopolymer.

A theoretical study of supramolecular aggregation of polydopamine tetramer subunits in aqueous solution

Conformational search for the most stable geometry connection of 16 sets of polydopamine (PDA) tetramer subunits has been systematically investigated using density functional theory (DFT) calculations. Our results indicated that the more planar subunits are, the more stable they are. This finding is in good agreement with recent experimental observations, which have suggested that PDA are composed of the nearly planar subunits that appear to be stacked together via the π-π interactions to form graphite-like layered aggregates associated with the balance of the intramolecular hydrogen bonds and steric effects from the indole and catechol moieties. Molecular dynamics (MD) simulations of 16 spherical clusters of the tetramer subunits of PDA in the gas and aqueous phase were performed at 298 K and confirmed the stability of supramolecular tetramer aggregates. The complex formation and binding energy of all 16 clusters are very strong although the shapes of the clusters in aqueous solution are not spherical and are very much different from those in the gas phase. The aggregations of all 16 clusters in aqueous solution were also confirmed from the profiles of the Kratky plot and the radius of gyration of all clusters. Our MD results in both gas phase and aqueous solution pointed out that there are high possibilities of aggregations of the 16 kinds of tetramer subunits although the conformations of each tetramer subunit are not flat. In summary, this work brings an insight into the controversial structure of PDA tetramer units and explains some of the important structural features found in the aqueous phase in comparison to the gas phase.

Melanin, the What, the Why and the How: An Introductory Review for Materials Scientists Interested in Flexible and Versatile Polymers

Today, western society is facing challenges to create new medical technologies to service an aging population as well as the ever-increasing e-waste of electronic devices and sensors. A key solution to these challenges will be the use of biomaterials and biomimetic systems. One material that has been receiving serious attention for its biomedical and device applications is eumelanin. Eumelanin, or commonly known as melanin, is nature's brown-black pigment and is a poly-indolequinone biopolymer, which possess unique physical and chemical properties for material applications. Presented here is a review, aimed at polymer and other materials scientists, to introduce eumelanin as a potential material for research. Covered here are the chemical and physical structures of melanin, an overview of its unique physical and chemical properties, as well as a wide array of applications, but with an emphasis on device and sensing applications. The review is then finished by introducing interested readers to novel synthetic protocols and post synthesis fabrication techniques to enable a starting point for polymer research in this intriguing and complex material.

Lithium cobalt phosphate electrode for the simultaneous determination of ascorbic acid, dopamine, and serum uric acid by differential pulse voltammetry

Lithium cobalt phosphate (LCP) was prepared and modified on the surface of glassy carbon electrode (GCE) to fabricate the electrochemical sensor (LCP/GCE) for the simultaneous determination of ascorbic acid (AA), dopamine (DA), and serum uric acid (UA). The homogenous incorporation of carbon improved the conductivity of LCP. Benefiting from the small particle size distribution, LCP/GCE has a large active surface and responds to AA, DA, and UA sensitively and rapidly. For the simultaneous detection with differential pulse voltammetry the anodic peaks of AA, DA, and UA were well-separated and appeared at ~0 V, ~0.19 V, and ~ 0.33 V (vs. Ag/AgCl), respectively. The linear responses toward AA, DA, and UA were in the range 10 μM-8.0 mM, 10 nM-10 μM, and 0.020 μM-25 μM; the detection limits were estimated to be 8.10 μM, 7.50 nM, and 22.7 nM (S/N = 3), respectively. The excellent selectivity and reproducibility of LCP/GCE enable serum UA to be detected without the interference of AA and DA. The recoveries of DA and AA in the serum sample were in the range 95 to 111%. The results indicate that LCP has the potential to be developed as the sensing devices to be applied to in vitro diagnosis. The lithium-ion battery cathodic material, LCP with the excellent adsorption and catalytic behavior, was utilized to fabricate the electrochemical sensor for the sensitive and simultaneous detection of AA, DA, and UA, which achieved the low detection limits and the wide concentration ranges. LCP/GCE can be used for the quantitative detection of serum UA without the interference of DA and AA. In addition, the recoveries of DA and AA in human serum were satisfactory, which illustrate the reliability of LCP/GCE to be applied to in vitro diagnosis.

Intervention of Polydopamine Assembly and Adhesion on Nanoscale Interfaces: State-of-the-Art Designs and Biomedical Applications

The translation of mussel-inspired wet adhesion to biomedical engineering fields have catalyzed the emergence of polydopamine (PDA)-based nanomaterials with privileged features and properties of conducting multiple interfacial interactions. Recent concerns and progress on the understanding of PDA's hierarchical structure and progressive assembly are inspiring approaches toward novel nanostructures with property and function advantages over simple nanoparticle architectures. Major breakthroughs in this field demonstrated the essential role of π-π stacking and π-cation interactions in the rational intervention of PDA self-assembly. In this review, the recently emerging concepts in the preparation and application of PDA nanomaterials, including 3D mesostructures, low-dimensional nanostructures, micelle/nanoemulsion based nanoclusters, as well as other multicomponent nanohybrids by the segregation and organization of PDA building blocks on nanoscale interfaces are outlined. The contribution of π-electron interactions on the interfacial loading/release of π electron-rich molecules (nucleic acids, drugs, photosensitizers) and the exogenous coupling of optical energy, as well as the impact of wet-adhesion interactions on the nano-bio interface interplay, are highlighted by discussing the structure-property relationships in their featured applications including fluorescent biosensing, gene therapy, drug delivery, phototherapy, combined therapy, etc. The limitations of current explorations, and future research directions are also discussed.

Polydopamine Ultrathin Film Growth on Mica via In-Situ Polymerization of Dopamine with Applications for Silver-Based Antimicrobial Coatings

The development of polydopamine (PDA) coatings with a nanometer-scale thickness on surfaces is highly desirable for exploiting the novel features arising from the specific structure on the molecular level. Exploring the mechanisms of thin-film growth is helpful for attaining desirable control over the useful properties of materials. We present a systematic study demonstrating the growth of a PDA thin film on the surface of mica in consecutive short deposition time intervals. Film growth at each deposition time was monitored through instrumental techniques such as atomic force microscopy (AFM), water contact angle (WCA) analysis, and X-ray photoelectron spectroscopy (XPS). Film growth was initiated by adsorption of the PDA molecules on mica, with subsequent island-like aggregation, and finally, a complete molecular level PDA film was formed on the surface due to further molecular adsorption. A duration of 60−300 s was sufficient for complete formation of the PDA layer within the thickness range of 0.5−1.1 nm. An outstanding feature of PDA ultrathin films is their ability to act as a molecular adhesive, providing a foundation for constructing functional surfaces. We also explored antimicrobial applications by incorporating Ag nanoparticles into a PDA film. The Ag NPs/PDA film was formed on a surgical blade and then characterized and confirmed by SEM-EDS and XPS. The modified film inhibited bacterial growth by up to 42% on the blade after cutting through a pork meat sample.

Stimuli-responsive polydopamine-based smart materials

This review provides in-depth insight into the structural engineering of PDA-based materials to enhance their responsive feature and the use of them in construction of PDA-based stimuli-responsive smart materials.

Tuning the Surface Chemistry of Melanin-Mimetic Polydopamine Nanoparticles Drastically Enhances Their Accumulation into Excised Human Skin

Melanin-mimetic polydopamine nanoparticles (PDA NPs) are emerging as promising candidates for topical and transdermal drug delivery because they mimic melanin, a naturally occurring skin pigment. However, our knowledge of their interactions with human skin remains limited. Hence, we set out to investigate the role of PDA NP surface chemistry in modulating their skin deposition. PDA NPs were synthesized by base-catalyzed oxidative self-polymerization of dopamine and functionalized with poly(ethylene glycol) (PEG) bearing different termini to obtain neutral, anionic, cationic, and hydrophobic PEGylated NPs. NPs were characterized by dynamic light scattering, transmission electron microscopy, Fourier transform-infrared spectroscopy, and X-ray photoelectron spectroscopy. The NPs were then labeled with rhodamine B, and their skin interactions were investigated both in vitro, using a Strat-M membrane, and ex vivo, using excised whole thickness human skin. In vitro diffusion studies revealed that the NPs did not permeate transdermally, rather the NPs accumulated in the Strat-M membrane after 24 h of incubation. Membrane deposition of the NPs showed a strong dependence on surface chemistry, with anionic (unmodified and carboxyl-terminated PEGylated) NPs achieving the highest accumulation, followed by neutral and cationic NPs, whereas hydrophobic NPs achieved the lowest degree of accumulation. In ex vivo permeation studies, we observed that surface modification of PDA NPs with PEG serving as an antifouling coating is essential to maintaining colloidal stability upon skin contact. Moreover, anionic PEGylated NPs were able to achieve 78% skin accumulation, which was significantly higher than neutral and cationic NPs (51 and 34% accumulation, respectively). Our findings provide important insights into the role of surface chemistry in enhancing the skin accumulation of melanin-mimetic PDA NPs as potential sunscreens and carriers for skin-targeted treatments.