Effect of pH on chitosan hydrogel polymer network structure

Injectable Chitosan Hydrogels Doped with 2D Peptide Nanosheet-Drug Conjugates for Glutathione-Responsive Sustained Drug Delivery

The development of novel and effective drug delivery systems aimed at enhancing therapeutic profile and efficacy of therapeutic agents is a critical challenge in modern medicine. This study presents an intelligent drug delivery system based on self-assembled two-dimensional peptide nanosheets (2D PNSs). Leveraging the tunable properties of amino acid structures and sequences, we design a peptide with the sequence of Fmoc-FKKGSHC, which self-assembles into 2D PNSs with uniform structure, high biocompatibility, and excellent degradability. Covalent attachment of thiol-modified doxorubicin (DOX) drugs to 2D PNSs via disulfide bond results in the peptide-drug conjugates (PDCs), which is denoted as PNS-SS-DOX. Subsequently, the PDCs are encapsulated within the injectable, thermosensitive chitosan (CS) hydrogels for drug delivery. The designed drug delivery system demonstrates outstanding pH-responsiveness and sustained drug release capabilities, which are facilitated by the characteristics of the CS hydrogels. Meanwhile, the covalently linked disulfide bond within the PNS-SS-DOX is responsive to intracellular glutathione (GSH) within tumor cells, enabling controlled drug release and significantly inhibiting the cancer cell growth. This responsive peptide-drug conjugate based on a 2D peptide nanoplatform paves the way for the development of smart drug delivery systems and has bright prospects in the future biomedicine field.

Characterization of Chitosan Hydrogels Obtained through Phenol and Tripolyphosphate Anionic Crosslinking

Chitosan is a deacetylated polymer of chitin that is extracted mainly from the exoskeleton of crustaceans and is the second-most abundant polymer in nature. Chitosan hydrogels are preferred for a variety of applications in bio-related fields due to their functional properties, such as antimicrobial activity and wound healing effects; however, the existing hydrogelation methods require toxic reagents and exhibit slow gelation times, which limit their application in biological fields. Therefore, a mild and rapid gelation method is necessary. We previously demonstrated that the visible light-induced gelation of chitosan obtained through phenol crosslinking (ChPh) is a rapid gelation method. To further advance this method (<10 s), we propose a dual-crosslinked chitosan hydrogel obtained by crosslinking phenol groups and crosslinking sodium tripolyphosphate (TPP) and the amino groups of chitosan. The chitosan hydrogel was prepared by immersing the ChPh hydrogel in a TPP solution after phenol crosslinking via exposure to visible light. The physicochemical properties of the dual-crosslinked hydrogels, including Young's moduli and water retentions, were subsequently investigated. Young's moduli of the dual-crosslinked hydrogels were 20 times higher than those of the hydrogels without TPP ion crosslinking. The stiffness could be manipulated by varying the immersion time, and the water retention properties of the ChPh hydrogel were improved by TPP crosslinking. Ion crosslinking could be reversed using an iron chloride solution. This method facilitates chitosan hydrogel use for various applications, particularly tissue engineering and drug delivery.

Boundary Lubrication Performance of Polyelectrolyte-Surfactant Complexes on Biomimetic Surfaces

Aqueous mixtures of oppositely charged polyelectrolytes and surfactants are useful in many industrial applications, such as shampoos and hair conditioners. In this work, we investigate the friction between biomimetic hair surfaces in the presence of adsorbed complexes formed from cationic polyelectrolytes and anionic surfactants in an aqueous solution. We apply nonequilibrium molecular dynamics (NEMD) simulations using the coarse-grained MARTINI model. We first developed new MARTINI parameters for cationic guar gum (CGG), a functionalized, plant-derived polysaccharide. The complexation of CGG and the anionic surfactant sodium dodecyl sulfate (SDS) on virgin and chemically damaged biomimetic hair surfaces was studied using a sequential adsorption approach. We then carried out squeeze-out and sliding NEMD simulations to assess the boundary lubrication performance of the CGG-SDS complex compressed between two hair surfaces. At low pressure, we observe a synergistic friction behavior for the CGG-SDS complex, which gives lower shear stress than either pure CGG or SDS. Here, friction is dominated by viscous dissipation in an interfacial layer comprising SDS and water. At higher pressures, which are probably beyond those usually experienced during hair manipulation, SDS and water are squeezed out, and friction increases due to interdigitation. The outcomes of this work are expected to be beneficial to fine-tune and screen sustainable hair care formulations to provide low friction and therefore a smooth feel and reduced entanglement.

Molecular modeling of the carbohydrate corona formation on a polyvinyl chloride nanoparticle and its impact on the adhesion to lipid bilayers

The pervasive presence of nanoplastics (NPs) in the environment has gained increasing attention due to their accumulation in living organisms. These emerging contaminants inevitably interact with extracellular polymeric substances along respiratory or gastrointestinal tracts, and diverse organic coating on the surface of NPs, known as bio- or eco-corona, is formed. Although its impact on altering the NP properties and potential cell internalization has been extensively examined, studies on its role in NP partitioning in the cell membrane are elusive yet. In this work, molecular dynamics is used to investigate the formation of chitosan (CT) corona centered on a polyvinyl chloride (PVC) nanoparticle and the uptake of the resulting complex onto lipid membranes. Coarse-grained models compatible with the newly developed Martini 3.0 force field are implemented for the two polymers employing the atomistic properties as targets in the parameterization. The reliability of the coarse-grained polymer models is demonstrated by reproducing the structural properties of the PVC melt and of solvated CT strands, as well as by determining the conformation adopted by the latter at the NP surface. Results show that the spontaneous binding of CT chains of high and intermediate protonation degrees led to the formation of soft and hard corona that modulates the interaction of PVC core with model membranes. The structural changes of the corona adsorbed at the lipid-water interface enable a subsequent transfer of the NP to the center of the saturated lipid membranes and a complete or partial transition to a snorkel conformation depending on the hydrophilic/hydrophobic balance in the CT-PVC complex. Overall, the computational investigation of the coarse-grained model system provides implications for understanding how the eco-corona development influences the uptake and implicit toxicology of NPs.

Agar and Chitosan Hydrogels' Design for Metal-Uptaking Treatments

In the field of cultural heritage, the use of natural gels is rising for the application of active agents. Here, two natural polymers are assessed: agar, a pioneer hydrogel for conservation treatments, and chitosan, a rather novel and metal-binding gel. For chitosan, a state-of-the-art based formulation (CS-ItA-LCys) is evaluated as it was reported for silver-complexing properties. It is evaluated whether these polymers can withstand the addition of the chelating compound deferoxamine, which is a bacterial siderophore. This allows for the obtainment of completely bio-sourced gel systems. A Fourier-transformed (FT) infrared spectroscopy characterization is performed, completed with rheological measurements and Cryo-Scanning Electron Microscopy (cryo-SEM) to investigate the physico-chemical properties of the gels, as well as their interaction with deferoxamine. Both polymers are also tested for their inherent complexing ability on silver ions using FT-Raman spectroscopy. A multi-analytical comparison shows different microstructures, in particular, the presence of a thick membrane for chitosan and different mechanical behaviors, with agar being more brittle. Neither hydrogel seems affected by the addition of deferoxamine; this is shown by similar rheological behavior and molecular structures in the presence or absence of the chelator. The intrinsic abilities of the chitosan formulation to make silver complex are demonstrated with the observation of two peaks characteristic of Ag-S and Ag-O bonds. Agar and chitosan are both proven to be reliable gels to act as carriers for bio-based active agents. This paper confirms the potential asset of the chitosan formulation CS-ItA-LCys as a promising gel for the complexation of soluble silver.

Chitosan-Grafted-Poly(N-vinylcaprolactam)-Decorated Fe3O4@SiO2 Core-Shell Nanoformulation as an Efficient Drug Delivery System for Poorly Soluble Drugs

Hydrocortisone, a commonly used anti-inflammatory drug, has limited aqueous solubility and several side effects. To address this challenge, as a proof-of-concept, this article demonstrates the development of a controlled-release drug delivery system (DDS) for hydrocortisone using chitosan-grafted poly(N-vinylcaprolactam) (CS-g-PNVCL)-coated core-shell Fe3O4@SiO2 nanoformulations (NFs). Reported magnetic nanoparticles (NPs) were synthesized and modified with silica, PNVCL, and CS precursors to enhance the biocompatibility of DDS and drug-loading efficiency. The release rate of hydrocortisone from Fe3O4@SiO2@CS-g-PNVCL NFs was observed to be higher at lower pH values, and the smart polymer coating demonstrated temperature responsiveness, facilitating drug release at higher temperatures. Fe3O4@SiO2@CS-g-PNVCL NFs exhibited a cell viability of around 97.2 to 87.3% (5-100 μg/mL) after 24-48 h, while the hydrocortisone-NFs had a cell viability of around 93.2 to 82.3%. Our findings suggest that CS-g-PNVCL-coated Fe3O4@SiO2 NPs effectively enhance the solubility, loading capacity, and targeted delivery of poorly soluble drugs, thereby improving their therapeutic efficacy and bioavailability.

Morphology and Transport Study of Acid-Base Blend Proton Exchange Membranes by Molecular Simulations: Case of Chitosan/Nafion

Blending a basic polymer (e.g., chitosan) with Nafion can modify some membrane properties in direct methanol fuel cell applications, e.g., controlling methanol crossover, by regulating the morphology of hydrophilic channels. Unraveling the mechanisms by which the channel morphology is modified is essential to formulate design strategies for acid-base blend membrane development. Thus, we use molecular simulations to analyze the morphological features of a blend membrane (at 75/25 chitosan/Nafion wt %), i.e., (i) water/polymer phase organizations, (ii) number and size of water clusters, and (iii) quantitative morphological measures of hydrophilic channels, and compare them to the pure Nafion in a wide range of water contents. It is found that the affinity of water to different hydrophilic groups in the blend membrane can result in more distorted and dispersed hydrophilic phase and fewer bulk water-like features compared to pure Nafion. Also, the width of the hydrophilic network bottleneck, i.e., pore limiting diameter (PLD), is found to be almost five times smaller for the blend membrane compared to Nafion at their maximum water contents. Moreover, by changing the chitosan/Nafion weight ratio from 75/25 to 0/100, we show that as Nafion content increases, all channel morphological characteristics alter monotonically except PLD. This is mainly due to the strong acid-base interactions between Nafion and chitosan, which hinder the monotonic growth of PLD. Interestingly, water and methanol diffusion coefficients are strongly correlated with PLD, suggesting that PLD can be used as a single parameter for tailoring the blending ratio for achieving the desired diffusion properties of acid-base membranes.

Recent advances in chitosan-based materials; The synthesis, modifications and biomedical applications

The attention to polymer-based biomaterials, for instance, chitosan and its derivatives, as well as the techniques for using them in numerous scientific domains, is continuously rising. Chitosan is a decomposable naturally occurring polymeric material that is mostly obtained from seafood waste. Because of its special ecofriendly, biocompatible, non- toxic nature as well as antimicrobial properties, chitosan-based materials have received a lot of interest in the field of biomedical applications. The reactivity of chitosan is mainly because of the amino and hydroxyl groups in its composition, which makes it further fascinating for various uses, including biosensing, textile finishing, antimicrobial wound dressing, tissue engineering, bioimaging, gene, DNA and drug delivery and as a coating material for medical implants. This study is an overview of the different types of chitosan-based materials which now a days have been fabricated by applying different techniques and modifications that include etherification, esterification, crosslinking, graft copolymerization and o-acetylation etc. for hydroxyl groups' processes and acetylation, quaternization, Schiff's base reaction, and grafting for amino groups' reactions. Furthermore, this overview summarizes the literature from recent years related to the important applications of chitosan-based materials (i.e., thin films, nanocomposites or nanoparticles, sponges and hydrogels) in different biomedical applications.

A study across scales to unveil microstructural regimes in the multivalent metal driven self-assembly of cellulose nanocrystals

Understanding the behaviour of self-assembled systems, from nanoscale building blocks to bulk materials, is a central theme for the rational design of high-performance materials. Herein, we revealed, at different length scales, how the self-assembly of TEMPO-oxidised cellulose nanocrystals (TOCNCs) into rod fractal gels is directed by the complexation of Fe3+ ions on the surface of colloidal particles. Different specificities in Fe3+ binding on the TOCNC surface and conformational changes of the nanocellulose chain were unveiled by paramagnetic NMR spectroscopy. The macroscopic properties of systems presenting different concentrations of TOCNCs and Fe3+ ions were investigated by rheology and microscopy, demonstrating the tunability of the self-assembly of cellulose nanorods driven by Fe3+ complexation. Near-atomistic coarse-grained molecular dynamics simulations were developed to gain microscopic insight into the behaviour of this colloidal system. We found that the formation of different self-assembled architectures is driven by metal-nanocellulose complexation combined with the attenuation of electrostatic repulsion and water structuration around cellulose, leading to different microstructural regimes, from isolated nanorods to disconnected rod fractal clusters and rod fractal gels. These findings lay the foundation to unlock the full potential of cellulose nanocrystals as sustainable building blocks to develop self-assembled materials with defined structural control for a range of advanced applications.

Injectable hydrogels for cartilage and bone tissue regeneration: A review

Annually, millions of patients suffer from irreversible injury owing to the loss or failure of an organ or tissue caused by accident, aging, or disease. The combination of injectable hydrogels and the science of stem cells have emerged to address this persistent issue in society by generating minimally invasive treatments to augment tissue function. Hydrogels are composed of a cross-linked network of polymers that exhibit a high-water retention capacity, thereby mimicking the wet environment of native cells. Due to their inherent mechanical softness, hydrogels can be used as needle-injectable stem cell carrier materials to mend tissue defects. Hydrogels are made of different natural or synthetic polymers, displaying a broad portfolio of eligible properties, which include biocompatibility, low cytotoxicity, shear-thinning properties as well as tunable biological and physicochemical properties. Presently, novel ongoing developments and native-like hydrogels are increasingly being used broadly to improve the quality of life of those with disabling tissue-related diseases. The present review outlines various future and in-vitro applications of injectable hydrogel-based biomaterials, focusing on the newest ongoing developments of in-situ forming injectable hydrogels for bone and cartilage tissue engineering purposes.

Synthesis, Characterization, Properties, and Biomedical Application of Chitosan-Based Hydrogels

The prospective applications of chitosan-based hydrogels (CBHs), a category of biocompatible and biodegradable materials, in biomedical disciplines such as tissue engineering, wound healing, drug delivery, and biosensing have garnered great interest. The synthesis and characterization processes used to create CBHs play a significant role in determining their characteristics and effectiveness. The qualities of CBHs might be greatly influenced by tailoring the manufacturing method to get certain traits, including porosity, swelling, mechanical strength, and bioactivity. Additionally, characterization methods aid in gaining access to the microstructures and properties of CBHs. Herein, this review provides a comprehensive assessment of the state-of-the-art with a focus on the affiliation between particular properties and domains in biomedicine. Moreover, this review highlights the beneficial properties and wide application of stimuli-responsive CBHs. The main obstacles and prospects for the future of CBH development for biomedical applications are also covered in this review.

Molecular dynamics study of low molecular weight gel forming salt-triggered dipeptide

Molecular dynamics simulation method was used to study the aggregation of Na and Ca salts in different concentrations of Naphthalene-dipeptide (2NapFF) solutions. The results show that high-valence Ca2+ triggers the formation of a gel at a certain dipeptide concentration, and the low-valence Na+ system follows the aggregation law of general surfactants. The results also show that hydrophobic and electrostatic forces are the main driving forces for the formation of dipeptide aggregates, and that hydrogen bonds do not play a major role in the formation of dipeptide solution aggregates. Hydrophobic and electrostatic effects are the main driving forces for the formation of gels in dipeptide solutions triggered by Ca2+. Electrostatic attraction drives Ca2+ to form a weak coordination with four oxygen atoms on two carboxyl groups, which causes the dipeptide molecules to form a gel with a branched network structure.

Synthesis of chitosan succinate-g-amine functionalized mesoporous silica: Inorganic-organic nanohybrid for antibacterial assessment, antioxidant activity and pH-controlled drug delivery

An innovative and proficient inorganic-organic nanohybrid was synthesized by using amine modified MCM-41 as an inorganic precursor combined with organic moiety, a derivative of chitosan i.e. chitosan succinate through amide bond. These nanohybrids can be used in diverse applications due to potential combination of desired properties of inorganic and organic components. The nanohybrid was characterized by FTIR, TGA, small angle powder XRD, zeta potential, particle size distribution, BET, proton NMR and ¹³C NMR techniques to confirm its formation. The synthesized hybrid was loaded with curcumin drug to check its potential application for controlled drug release, showing 80 % drug release in acidic medium (i.e. pH -5.0), while physiological pH -7.4 shows only 25 % release. The encapsulation efficiency of nanohybrid is 87.24 %. The results of antibacterial performances are demonstrated in terms of ZOI (zone of inhibition) which depicts that hybrid material shows better ZOI in gram negative (E. coli) than for gram positive (B. subtilis) bacteria. Nanohybrid was also tested for the antioxidant activity by using two different methods (DPPH and ABTS) radical scavenging methods. The ability of nano-hybrid to scavenge DPPH radicals was found 65 %, and ability to scavenge ABTS radicals was 62.47 %.

Acid-induced Poria cocos alkali-soluble polysaccharide hydrogel: Gelation behaviour, characteristics, and potential application in drug delivery

Poria cocos alkali-soluble polysaccharide (PCAP), a water-insoluble β-glucan, is the main component of the total dried sclerotia of Poria cocos. However, its gelation behaviour and properties have yet to be comprehensively studied. In this study, an acid-induced physical hydrogel based on natural PCAP is fabricated. The acid-induced gelation in PCAP is explored with respect to the pH and polysaccharide concentration. PCAP hydrogels are formed in the pH range of 0.3-10.5, and the lowest gelation concentration is 0.4 wt%. Furthermore, dynamic rheological, fluorescence, and cyclic voltammetry measurements are performed to elucidate the gelation mechanism. The results reveal that hydrogen bonds and hydrophobic interactions play a dominant role in gel formation. Subsequently, the properties of the PCAP hydrogels are investigated using rheological measurements, scanning electron microscopy, gravimetric analysis, free radical scavenging, MTT assays, and enzyme-linked immunosorbent assays. The PCAP hydrogels exhibit a porous network structure and cytocompatibility, in addition to good viscoelastic, thixotropic, water-holding, swelling, antioxidant, and anti-inflammatory activities. Furthermore, using rhein as a model drug for encapsulation, it is demonstrated that its cumulative release behaviour from the PCAP hydrogel is pH dependent. These results indicate the potential of PCAP hydrogels for application in biological medicine and drug delivery.

β-Alanine enhancing the crosslink of chitosan/poly-(γ-glutamic acid) hydrogel for a potential alkaline-adapted wound dressing

Tiny crosslink in chitosan (CS)/poly-(γ-glutamic acid) (γ-PGA) hydrogel leads to some disadvantages including low mechanical strength and high swelling. To enhance the crosslink of CS/γ-PGA hydrogel, amino acid (AA) was introduced to remove the drawbacks. The results indicated that AA can dramatically increase the crosslink and mechanical properties of CS/γ-PGA hydrogel, and AA chain length and concentration have a drastic effect on them. Particularly, 0.5 % β-Alanine (β-Ala) decreased the hydrogel by 70 % in porosity, 52 % in water solubility, and 30 % in swelling, but increased by 2.2-fold in elastic modulus, 2.08-fold in stress, and 1.53-fold in water retention. The porosity of the hydrogel correlates positively with the elastic modulus but negatively with the crosslinking degree. The effect of pH on CS/β-Ala/γ-PGA hydrogel was investigated in the load and release of benzalkonium chlorides (BAC). β-Ala strengthened pH response of the hydrogel in BAC load and release. The loading capacity increased with pH value, and 0.5 % β-Ala increased the hydrogel by 1.25-fold in the release capacity in alkaline environment, suggesting a good buffering effect of β-Ala on pH variation to accelerate the transportation of BAC. CS/β-Ala/γ-PGA hydrogel will be competently applied as a potential material for wound dressing in alkaline environment.

Full factorial design of experiment-based and response surface methodology approach for evaluating variation in uniaxial compressive mechanical properties, and biocompatibility of photocurable PEGDMA-based scaffolds

The goal of this study is to fabricate biocompatible and minimally invasive bone tissue engineering scaffolds that allowin situphotocuring and further investigate the effect on the mechanical properties of the scaffold due to the prevailing conditions around defect sites, such as the shift in pH from the physiological environment and swelling due to accumulation of fluids during inflammation. A novel approach of incorporating a general full factorial design of experiment (DOE) model to study the effect of the local environment of the tissue defect on the mechanical properties of these injectable and photocurable scaffolds has been formulated. Moreover, the cross-interaction between factors, such as pH and immersion time, was studied as an effect on the response variable. This study encompasses the fabrication and uniaxial mechanical testing of polyethylene glycol dimethacrylate (PEGDMA) scaffolds for injectable tissue engineering applications, along with the loss in weight of the scaffolds over 72 h in a varying pH environment that mimicsin vivoconditions around a defect. The DOE model was constructed with three factors: the combination of PEGDMA and nano-hydroxyapatite referred to as biopolymer blend, the pH of the buffer solution used for immersing the scaffolds, and the immersion time of the scaffolds in the buffer solution. The response variables recorded were compressive modulus, compressive strength, and the weight loss of the scaffolds over 72 h of immersion in phosphate-buffered saline at respective pH. The statistical model analysis provided adequate information in explaining a strong interaction of the factors on the response variables. Further, it revealed a significant cross-interaction between the factors. The factors such as the biopolymer blend and pH of the buffer solution significantly affected the response variables, compressive modulus and strength. At the same time, the immersion time had a strong effect on the loss in weight from the scaffolds over 72 h of soaking in the buffer solution. The biocompatibility study done using a set of fluorescent dyes for these tissue scaffolds highlighted an enhancement in the pre-osteoblasts (OB-6) cell attachment over time up to day 14. The representative fluorescent images revealed an increase in cell attachment activity over time. This study has opened a new horizon in optimizing the factors represented in the DOE model for tunable PEGDMA-based injectable scaffold systems with enhanced bioactivity.

Martini 3 Coarse-Grained Force Field for Carbohydrates

The Martini 3 force field is a full reparametrization of the Martini coarse-grained model for biomolecular simulations. Due to the improved interaction balance, it allows for a more accurate description of condensed phase systems. In the present work, we develop a consistent strategy to parametrize carbohydrate molecules accurately within the framework of Martini 3. In particular, we develop a canonical mapping scheme which decomposes arbitrarily large carbohydrates into a limited number of fragments. Bead types for these fragments have been assigned by matching physicochemical properties of mono- and disaccharides. In addition, guidelines for assigning bonds, angles, and dihedrals were developed. These guidelines enable a more accurate description of carbohydrate conformations than in the Martini 2 force field. We show that models obtained with this approach are able to accurately reproduce osmotic pressures of carbohydrate water solutions. Furthermore, we provide evidence that the model differentiates correctly the solubility of the polyglucoses dextran (water-soluble) and cellulose (water insoluble but soluble in ionic liquids). Finally, we demonstrate that the new building blocks can be applied to glycolipids. We show they are able to reproduce membrane properties and induce binding of peripheral membrane proteins. These test cases demonstrate the validity and transferability of our approach.

Multifunctional chitosan ferrogels for targeted cancer therapy by on-demand magnetically triggered drug delivery and hyperthermia

A facile method for the synthesis of chitosan ferrogels for magnetically triggered drug release and hyperthermia treatment is presented. The glyoxal crosslinked, dried ferrogels (magnetic bioaerogels) have been characterized by FTIR, XRD, TGA and VSM analyses and they possess unique characteristics such as high porosity, ultra-low density and superparamagnetism (M_s up to 56 emu g^-1). In addition, they present high drug (Doxorubicin, DOX) loading efficiency (~40 %), tumor-specific pH-responsive swelling, excellent biodegradation, remotely switchable drug release and high magnetic hyperthermia potential (42 °C within 4 min). Almost complete degradation of the ferrogels occurs in 3 months under physiological conditions (pH = 7.4), while the tumor-specific microenvironment (pH = 5.6) accelerates the degradation rate, where it occurs in ~8 weeks. Furthermore, an enhancement in drug release (by 30 %) was observed in 60 min, when subjected to a magnetic field of 50 mT. Excellent biocompatibility and promising cell-material interactions have been exhibited by the ferrogels, substantiated by MTT assay, cytoskeleton staining and confocal imaging. The viability has been drastically reduced for DOX-loaded samples due to the action of the released drug; validating the efficacy of DOX loaded ferrogels. The system presented, therefore, holds multi-functionalities enabling smart cancer treatment.

Dendrobium officinale Enzyme Changing the Structure and Behaviors of Chitosan/γ-poly(glutamic acid) Hydrogel for Potential Skin Care

Hydrogels have been widespreadly used in various fields. But weak toughness has limited their further applications. In this study, Dendrobium officinale enzyme (DOE) was explored to improve chitosan/γ-poly(glutamic acid) (CS/γ-PGA) hydrogel in the structure and properties. The results indicated that DOE with various sizes of ingredients can make multiple noncovalent crosslinks with the skeleton network of CS/γ-PGA, significantly changing the self-assembly of CS/γ-PGA/DOE hydrogel to form regular protuberance nanostructures, which exhibits stronger toughness and better behaviors for skin care. Particularly, 4% DOE enhanced the toughness of CS/γ-PGA/DOE hydrogel, increasing it by 116%. Meanwhile, water absorption, antioxygenation, antibacterial behavior and air permeability were increased by 39%, 97%, 27% and 52%.

Effects of Formulation on the Palatability and Efficacy of In-Feed Praziquantel Medications for Marine Finfish Aquaculture

Praziquantel (PZQ) provides an effective treatment against monogenean parasitic infestations in finfish. However, its use as an in-feed treatment is challenging due to palatability issues. In this study, five formulations of PZQ beads (1−4 mm) were developed using marine-based polymers, with allicin added as a flavouring agent. All formulations attained PZQ loading rates ≥74% w/w, and the beads were successfully incorporated into fish feed pellets at an active dietary inclusion level of 10 g/kg. When tested for palatability and digestibility in small yellowtail kingfish, the PZQ-loaded beads produced with alginate-chitosan, alginate-Cremophor® RH40, and agar as carriers resulted in high consumption rates of 99−100% with no digesta or evidence of beads in the gastrointestinal tract (GIT) of fish fed with diets containing either formulation. Two formulations produced using chitosan-based carriers resulted in lower consumption rates of 68−75%, with undigested and partly digested beads found in the fish GIT 3 h post feeding. The PZQ-loaded alginate-chitosan and agar beads also showed good palatability in large (≥2 kg) yellowtail kingfish infected with gill parasites and were efficacious in removing the parasites from the fish, achieving >90% reduction in mean abundance relative to control fish (p < 0.001). The two effective formulations were stable upon storage at ambient temperature for up to 18 months, showing residual drug content >90% compared with baseline levels. Overall, the palatability, efficacy and stability data collected from this study suggest that these two PZQ particulate formulations have potential applications as in-feed anti-parasitic medications for the yellowtail kingfish farming industry.

Hydrogels as Corneal Stroma Substitutes for In Vitro Evaluation of Drug Ocular Permeation

Hydrogels are complex hydrophilic structures, consisting of crosslinked homopolymers or copolymers insoluble in water. Due to their controllable bio-physicochemical properties mimicking the morphology of the native extracellular matrix, they are a key part of a lot of research fields, including medicine, pharmaceutics, and tissue engineering. This paper was focused on the preparation and characterization of hydrogels from different blends of polyvinyl alcohol (PVA) with microcrystalline cellulose (MCC) and gelatin (GEL) at various ratios, and from gelatin and chitosan alone to understand their feasibility of utilizing as corneal stroma substitutes in permeability tests for drug candidate molecules in early stages of their development. The characterization was carried out by differential scanning calorimetry, electron microscopy (SEM), water content, mass loss, water permeability, wettability, and tensile stress–strain tests. After the physicochemical characterization, PVA/MCC blend and chitosan proved to be the most promising constructs, showing negligible mass loss after immersion in aqueous medium for two weeks and low hydrodynamic permeability. They were then employed in drug molecules permeation studies and these data were compared to that obtained through excised tissues. The results obtained showed that PVA/MCC hydrogels have similar mechanical and permeability properties to corneal stroma.

Reversible Crosslinking of Polymer/Metal-Ion Complexes for a Microfluidic Switch

The importance of chitosan has been strongly emphasized in literature because this natural polymer could not only remove heavy metal ions in water but also have the potential for recyclability. However, reversible phase transition and its dynamics, which are highlighting areas of a recycle process, have not been studied sufficiently. Here, we present dynamic studies of the dissolution as well as the gelation of a physically crosslinked chitosan hydrogel. Specifically, a one-dimensional gel growth system and an acetate buffer solution were prepared for the precise analysis of the dominant factors affecting a phase transition. The dissolution rate was found to be regulated by three major factors of the pH level, Cu2+, and NO2 -, while the gelation rate was strongly governed by the concentration of OH-. Apart from the gelation rate, the use of Cu2+ led to the rapid realization of gel characteristics. The results here provide strategies for process engineering, ultimately to determine the phase-transition rates. In addition, a microfluidic switch was successfully operated based on a better understanding of the reversible crosslinking of the chitosan hydrogel. Rapid gelation was required to close the channel, and a quick switchover was achieved by a dissolution enhancement strategy. As a result, factors that regulated the rates of gelation or dissolution were found to be useful to operate the fluidic switch.

Preparation of pH-sensitive carboxymethyl cellulose/chitosan/alginate hydrogel beads with reticulated shell structure to deliver Bacillus subtilis natto

pH-sensitive hydrogels have been applied in delivering probiotics and drugs. However, pH sensitivity has been found to be contradictory with structural stability in hydrogel preparation. In this work, a novel strategy based on two systems of sodium carboxymethyl cellulose (CMC)/chitosan (CS) and sodium alginate (SA)/calcium chloride was designed to construct a reticulated shell structure stable for 3 h in simulated gastric fluid (pH 1.2) but began to break up at 2 h in simulated intestinal fluid (pH 6.8), exhibiting obvious pH sensitivity. The embedding rate of Bacillus subtilis natto reached to 67.3%, and the sustained release lasted for more than 10 h. It is implicated that the reticulated shell structure has harmoniously balanced the two incompatible properties of pH sensitivity and sustained release of CMC/CS/SA beads.

A chitosan hydrogel sealant with self-contractile characteristic: From rapid and long-term hemorrhage control to wound closure and repair

Emergent and long-term hemorrhage control is requisite and beneficial for reducing global mortality and postoperative complications (e.g., second bleeding and adverse tissue adhesion). Despite recent advance in injectable hydrogels for hemostasis, achieving rapid gelation, strong tissue-adhesive property and stable mechanical strength under fluid physiological environment is still challenging. Herein, we developed a novel chitosan hydrogel (CCS@gel) via dynamic Schiff base reaction and mussel-inspired catechol chemistry. The hydrogel possessed high gelation rate (<10 s), strong wet adhesiveness, excellent self-healing performance and biocompatibility. More importantly, the CCS@gel exhibited saline-induced contractile performance and mechanical enhancement, promoting its mechanical property in moist internal conditions. In vivo studies demonstrated its superior hemostatic efficacy for diverse anticoagulated visceral and carotid bleeding scenarios, compared to commercialized fibrin glue. The hydrogel-treated rats survived for 8 weeks with minimal inflammation and postoperative adhesion. These results revealed that the promising CCS@gel would be a facile, efficient and safe sealant for clinical hemorrhage control.

Polymorphism of chitosan-based networks stabilized by phytate investigated by molecular dynamics simulations

Chitosan can associate in the presence of polyphosphates into insoluble hydrogels capable of drug encapsulation and safe and efficient release. On the one hand, chitosan hydrogels were synthesized using the phytate anion as a crosslinking agent and were characterized by employing dynamic light scattering (DLS) and Fourier transform infrared spectroscopy (FTIR). On the other hand, an effective chitosan-phytate model with atomistic details was created to examine the underlying physical crosslinking pattern, and the structure and dynamics of the chitosan-phytate complex were systematically investigated by using molecular dynamics (MD) simulations. To harbor the crosslinker potential for obtaining chitosan-based hydrogels, the impact of the phytate concentration and the functional groups of the chitosan on the reticulation process was addressed. The phytate association was determined by the phosphates' capacity for H-bonding to the amine and hydroxyl groups belonging to two consecutive glucosidic units. The physical crosslinking pattern was determined by the number of chitosan chains bound by one phytate anion and the phytate orientation relative to the glucopyranose neighbors. Cross-linking of two up to six chitosan chains mediated by a phytate anion represented favorable states, and the number distribution of cross-linked chains depended on the phytate concentration. The circular distribution of the cross-linkable phosphates regulated the nearly isotropic orientation of the chitosan chains and phytate at the junction, and the variety of topological crosslinking demonstrated the phytate ion's potential for developing chitosan-based hydrogels with improved structural attributes.

A Smart Patch with On-Demand Detachable Adhesion for Bioelectronics

A smart ionic skin patch with on-demand detachable adhesion has been developed as human-machine interface for physiological signal monitoring. In spite of the multifunctions demonstrated by existing ionic skin, it is still difficult to distinguish different signals simultaneously. Moreover, the secondary damages to the tissues are often overlooked when the adhesive materials are removing from the wound. Herein, a multifunctional biomimetic hydrogel with temperature, mechanical, electrical, and pH response is developed. This hydrogel is designed by in situ polymerizing of hydrophilic anion monomers in a natural cationic polysaccharide to construct multifunctional biomimetic ionic channel. Due to the reversible physical cross-linked network and thermosensitivity, the mechanical properties, adhesion, and visual effect of the hydrogel can be tuned by changing hydrogen bonding density via phase transition, thus making it an excellent biosafe material for wearable device. The hydrogel is utilized as skin patch intended for monitoring physiological signals stimulated by physical and chemical changes involving pressure, temperature, pH value, and electrocardiograph. Especially, this ionic skin patch can recognize temperature change signals precisely either in broad or extremely narrow temperature range. This smart skin patch can even recognize the pressure and temperature signals in real time and differentiate the signals simultaneously.

Self-Assembling Polypeptide Hydrogels as a Platform to Recapitulate the Tumor Microenvironment

Simple Summary

The tumor microenvironment is characterized by increased tissue stiffness, low (acidic) pH, and elevated temperature, all of which contribute to the development of cancer. Improving our in vitro models of cancer, therefore, requires the development of cell culture platforms that can mimic these microenvironmental properties. Here, we study a new biomaterial composed of short amino acid chains that self-assemble into a fibrous hydrogel network. This material enables simultaneous and independent tuning of substrate rigidity, extracellular pH, and temperature, allowing us to mimic both healthy tissues and the tumor microenvironment. We used this platform to study the effect of these conditions on pancreatic cancer cells and found that high substrate rigidity and low pH promote proliferation and survival of cancer cells and activate important signaling pathways associated with cancer progression.

Abstract

The tumor microenvironment plays a critical role in modulating cancer cell migration, metabolism, and malignancy, thus, highlighting the need to develop in vitro culture systems that can recapitulate its abnormal properties. While a variety of stiffness-tunable biomaterials, reviewed here, have been developed to mimic the rigidity of the tumor extracellular matrix, culture systems that can recapitulate the broader extracellular context of the tumor microenvironment (including pH and temperature) remain comparably unexplored, partially due to the difficulty in independently tuning these parameters. Here, we investigate a self-assembled polypeptide network hydrogel as a cell culture platform and demonstrate that the culture parameters, including the substrate stiffness, extracellular pH and temperature, can be independently controlled. We then use this biomaterial as a cell culture substrate to assess the effect of stiffness, pH and temperature on Suit2 cells, a pancreatic cancer cell line, and demonstrate that these microenvironmental factors can regulate two critical transcription factors in cancer: yes-associated protein 1 (YAP) and hypoxia inducible factor (HIF-1A).

Recent advancements in enzyme-mediated crosslinkable hydrogels: In vivo-mimicking strategies

Enzymes play a central role in fundamental biological processes and have been traditionally used to trigger various processes. In recent years, enzymes have been used to tune biomaterial responses and modify the chemical structures at desired sites. These chemical modifications have allowed the fabrication of various hydrogels for tissue engineering and therapeutic applications. This review provides a comprehensive overview of recent advancements in the use of enzymes for hydrogel fabrication. Strategies to enhance the enzyme function and improve biocompatibility are described. In addition, we describe future opportunities and challenges for the production of enzyme-mediated crosslinkable hydrogels.

The Martini Model in Materials Science

The Martini model, a coarse-grained force field initially developed with biomolecular simulations in mind, has found an increasing number of applications in the field of soft materials science. The model's underlying building block principle does not pose restrictions on its application beyond biomolecular systems. Here, the main applications to date of the Martini model in materials science are highlighted, and a perspective for the future developments in this field is given, particularly in light of recent developments such as the new version of the model, Martini 3.

Chitosan-covered liposomes as a promising drug transporter: nanoscale investigations

Liposomes are small artificial vesicles spherical shaped of 50-1000 nm in diameter. They are created from natural non-toxic phospholipids membranes. Externally, they are decorated with biocompatible polymers. Chitosan, a natural polymer, demonstrates exceptional advantages in drug delivery, in particular, as liposome cover. In this paper, Molecular Dynamics simulations (MD) are performed in the coupled NPT-NPH and NVT-NVE statistical ensembles to study the static and dynamic properties of DPPC membrane-bilayer with grafted cationic chitosan chains, with added Cl- anions to neutralize the environment, using the Martini coarse-grained force-field. From the NPT-NPH MD simulations we found a chitosan layer L DM ranging from 3.2 to 6.6 nm for graft chains of a degree of polymerization n p = 45 and different grafting molar fractions X p = 0.005, X p = 0.014 and X p = 0.1. Also, the chitosan chains showed three essential grafting regimes: mushroom, critic, and brush depending on X p. The DPPC bilayer thickness D B and the area per lipid A l increased proportionally to X p. From the NVT-NVE MD simulations, the analysis of the radial distribution function showed that the increase of X p gives a more close-packed and rigid liposome. The analysis of the mean square displacement revealed that the diffusion of lipids is anomalous. In contrast, the diffusion of chitosan chains showed a normal diffusion, just after 100 ps. The diffusion regime of ions is found to be normal and independent of time. For the three identified regimes, the chitosan showed a tendency to adhere to the membrane surface and therefore affect the properties of the liposomal membrane.

Potentiometric extractive sensing of lead ions over a nickel oxide intercalated chitosan-grafted-polyaniline composite

The present research paper reports the extractive potentiometric sensing of lead ions over a chemically functionalized ternary nanocomposite of nickel oxide intercalated chitosan grafted polyaniline (NiO-in-CHIT-g-PANI) prepared by the in situ chemical polymerization and composite formation technique under optimized conditions. The structural, morphological, and physical properties of the composite material were investigated by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and other suitable ASTM methods. The obtained analytical result suggests the formation of a porous hybrid composite matrix with better electrical conductivity ∼ 5.25 × 10^-3 S cm^-1, free interactive carbonyl sites, and evolved aligned crystallinity. Furthermore, a film of the synthesized composite was cast on ITO coated glass by the spin coating technique for potentiometric sensing and the recovery of adsorbed Pb²⁺ ions from natural and artificial water solutions. Under optimum conditions of ∼pH = 7.0 and a temperature of 25 °C, the electrode exhibited potential responses for Pb²⁺ ions in concentrations ranging from 1.0 × 10^-6 M to 1 × 10^-3 M along with a sensitivity of 0.2379 mV μM^-1 cm^-2, response time of 40 s, recovery time of 10 s, and stability for 64 days. The adsorbed Pb²⁺ ions were recovered at a rate of 84% after applying an optimized reverse voltage on the above-used electrodes. The adsorption and desorption mechanism has been explained based on the induced potential due to the electrochemical surface interaction between Pb²⁺ and the NiO-in-CHIT-g-PANI based electrode. The analytical application of the fabricated electrode in the real sample was also explored for the sensing and recovery of the respective metal ions in wastewater samples along with the possibility of optimization of the required metal concentrations.

Recent Advances of Chitosan-Based Injectable Hydrogels for Bone and Dental Tissue Regeneration

Traditional strategies of bone repair include autografts, allografts and surgical reconstructions, but they may bring about potential hazard of donor site morbidity, rejection, risk of disease transmission and repetitive surgery. Bone tissue engineering (BTE) is a multidisciplinary field that offers promising substitutes in biopharmaceutical applications, and chitosan (CS)-based bone reconstructions can be a potential candidate in regenerative tissue fields owing to its low immunogenicity, biodegradability, bioresorbable features, low-cost and economic nature. Formulations of CS-based injectable hydrogels with thermo/pH-response are advantageous in terms of their high-water imbibing capability, minimal invasiveness, porous networks, and ability to mold perfectly into an irregular defect. Additionally, CS combined with other naturally-derived or synthetic polymers and bioactive agents has proven to be an effective alternative to autologous bone and dental grafts. In this review, we will highlight the current progress in the development of preparation methods, physicochemical properties and applications of CS-based injectable hydrogels and their perspectives in bone and dental regeneration. We believe this review is intended as starting point and inspiration for future research effort to develop the next generation of tissue-engineering scaffold materials.

Tissue-engineered parathyroid gland and its regulatory secretion of parathyroid hormone

Parathyroid glands (PTGs) are important endocrine organs being mainly responsible for the secretion of parathyroid hormone (PTH) to regulate the balance of calcium (Ca) /phosphorus (P) ions in the body. Once PTGs get injured or removed, their resulting defect or loss of PTH secretion should disturb the level of Ca/P in blood, thus damaging other related organs (bone, kidney, etc.) and even causing death. Recently, tissue-engineered PTGs (TE-PTGs) have attracted lots of attention as a potential treatment for the related diseases of PTGs caused by hypoparathyroidism and hyperparathyroidism, including tetany, muscle cramp, nephrolithiasis, nephrocalcinosis, and osteoporosis. Although great progress has been made in the establishment of TE-PTGs with an effective strategy to integrate the key factors of cells and biomaterials, its regulatory secretion of PTH to mimic its natural rhythms in the body remains a huge challenge. This review comprehensively describes an overview of PTGs from physiology and pathology to cytobiology and tissue engineering. The state of the arts in TE-PTGs and the feasible strategies to regulate PTH secretion behaviors are highlighted to provide an important foundation for further investigation.

pH mediated rheological modulation of chitosan hydrogels

Chitosan (CS) hydrogels are used widely for multifarious applications in diverse fields due to the property of pH responsiveness. This study aims to explain the sensitivity of CS hydrogels to alteration in pH due to change in the concentration of acetic acid, which is a solvent for CS. Studies on changes in rheological properties in this regard are still scarce. The present study evaluated the change in rheological properties of the CS hydrogels by studying the flow behaviour, creep recovery and thixotropic property. The obtained data were used to fit mathematical models, like power law model and Herschel-Bulkley model to gain a vivid understanding of the rheological properties of CS hydrogel. Overall analyses revealed that the CS hydrogels, irrespective of the pH, were highly elastic in nature and exhibited significant creep recovery. However, the steady flow behaviour and thixotropy varied substantially with variation in pH.

pH-dependent RNA isolation from cells encapsulated in chitosan-based biomaterials

Chitosan has emerged as a useful biomaterial employed in tissue engineering and drug delivery applications due to its tunable and interesting properties. However, chitosan is protonated at biological pH and thus carries positive charges, which renders chitosan incompatible with conventional methods of RNA extraction. RNA extraction is an important step in investigating cell responses and behavior through studying their gene expression transcriptional profiles. While some researchers have tried different techniques to improve the yield and purity of RNA extracted from cells encapsulated in chitosan-based biomaterials, no single study has investigated the effects of manipulating pH of the homogenate during RNA extraction on the yield and quality of total RNA. This study confirms the release and binding of RNA from chitosan to be pH dependent while analyzing the impact of pH changes during the tissue disruption and homogenization step of extraction on the resulting yield and quality of isolated RNA. This concept was applied to three commonly used methods of RNA extraction, using adult neural stem/progenitor cells (aNSPCs) encapsulated within methacrylamide chitosan (MAC) as a model chitosan-based bioscaffold. High pH conditions resulted in high yields with good quality using both TRIzol and CTAB. pH of the homogenate did not affect RNeasy spin columns, which worked best in neutral conditions with good quality, however, the overall yield was low. Results in total show that pH affected RNA interaction with a chitosan-based bioscaffold, and thus altered the concentration, purity, and integrity of isolated RNA, dependent on the method used.

Dendritic Hydrogel Bioink for 3D Printing of Bacterial Microhabitat

A glucose-modified dendritic hydrogel is used as a bioink for bacterial encapsulation. This biocompatible hydrogel is a potentially suitable alternative to conventional alginate hydrogel for bacterial encapsulation, as it readily forms gel in the presence of Na+ or K+ ions without any additional stimuli such as pH, temperature, sonication, or the presence of divalent metal ions. We created a bacterial microhabitat by adding the gelator to phosphate-buffered saline containing live bacteria at physiological pH and using an additive three-dimensional (3D) printing technique. The bacteria remained viable and metabolically active within the 3D printed bacterial microhabitat, as shown with confocal laser scanning microscopy (CLSM) and scanning electrochemical microscopy (SECM).

Chitosan-coated different particles in spouted bed and their use in dye continuous adsorption system

In this work, three polymer suspensions were used for coating glass beads (GB), porcelain beads (PB), and polyethylene pellets (PP) in spouted bed. Subsequently, the continuous adsorption assays of the food dye Brilliant Blue FCF in a fixed bed column were performed, which was packed with the covered particles. Also, the static adsorption assays were carried out. The adsorption equilibrium isotherms were fitted by Freundlich, Langmuir, and Temkin models, being that the Temkin model was the most suitable to represent the equilibrium data. The particle coating in the spouted bed showed promising results due to the high efficiency of the process. The PB, GB, and PP obtained coating efficiency values in the range to 92-96% when using the suspension of chitosan and hydroxyethyl cellulose. However, only the polyethylene particles coated with the chitosan suspension maintained its coating efficiency (95%). The maximum adsorption capacities at equilibrium of the coated particles of PP and GB were achieved with the chitosan suspension, being the values of around 800 mg g^-1. Thus, the chitosan-coated polyethylene particles showed to be a promising adsorbent for fixed bed column. Graphical abstract.