Downsizing and soft X-ray tomography for cellular uptake of interpenetrated metal-organic frameworks

Metal-organic frameworks (MOFs) are porous materials with potential in biomedical applications such as sensing, drug delivery, and radiosensitization. However, how to tune the properties of the MOFs for such applications remains challenging. Herein, we synthesized two MOFs, Zr-PEB and Hf-PEB. Zr-PEB can be classified as porous interpenetrated zirconium frameworks (PIZOFs) and Hf-PEB is its analogue. We controlled their sizes while maintaining their crystal structure by employing a coordination modulation strategy. They were designed to serve as sensitizer for X-ray therapy and as potential drug carriers. Comprehensive characterizations of the MOFs' properties have been conducted, and the in vitro biological impacts have been studied. Since viability assay showed that Hf-PEB was more biocompatible compared to Zr-PEB, the cellular uptake of Hf-PEB by cells was evaluated using both fluorescence microscopy and soft X-ray tomography (SXT), and the three-dimensional structure of Hf-PEB in cells was observed. The results revealed the potential of Zr-PEB and Hf-PEB as nanomaterials for biomedical applications and demonstrated that SXT is an effective tool to assist the development of such materials.

Nanomaterials-modified reverse osmosis membranes: a comprehensive review

Because of its great efficiency and widespread application, reverse osmosis (RO) is a popular tool for water desalination and purification. However, traditional RO membranes have a short lifespan due to membrane fouling, deterioration, decreased salt rejection rate, and the low water flux with aging. As a result, membrane modification has received a lot of attention recently, with nanomaterials being extensively researched to improve membrane efficacy and lifespan. Herein, we present an in-depth analysis of recent advances of RO membranes modification utilizing nanomaterials. An overview of the various nanomaterials used for membrane modification, including metal oxides, zeolites, and carbon nanomaterials, is provided. The synthesis techniques and methods of integrating these nanomaterials into RO membranes are also discussed. The impacts of nanomaterial change on the performance of RO membranes are addressed. The underlying mechanisms responsible for RO membrane enhancements by nanomaterials, such as improved surface hydrophilicity, reduced membrane fouling via surface repulsion and anti-adhesion properties, and enhanced structural stability, are discussed. Furthermore, the review provides a critical analysis of the challenges and limitations associated with the use of nanomaterials to modify RO membranes. Overall, this review provides valuable insights into the modification of RO membranes with nanomaterials, providing a full grasp of the benefits, challenges, and future prospects of this challenging topic.

Zn-Based Metal-Organic Frameworks Using Triptycene Hexacarboxylate Ligands: Synthesis, Structure, and Gas-Sorption Properties

A series of metal-organic frameworks (MOFs) based on zinc ions and two triptycene ligands of different size have been synthesized under solvothermal conditions. Structural analyses revealed that they are isostructural 3D-network MOFs. The high porosity and thermal stability of these MOFs can be attributed to the highly rigid triptycene-based ligands. Their BET specific surface areas depend on the size of the triptycene ligands. In contrast to these surface-area data, the H2 and CO2 adsorption of these MOFs is larger for MOFs with small pores. Consequently, we introduced functional groups to the bridge-head position of the triptycene ligands and investigated their effect on the gas-sorption properties. The results unveiled the role of the functional groups in the specific CO2 binding via an induced interaction between adsorbates and the functional groups. Excellent H2 and CO2 properties in these MOFs were achieved in the absence of open metal sites.

Reticular Chemistry for Optical Sensing of Anions

In the last few decades, reticular chemistry has grown significantly as a field of porous crystalline molecular materials. Scientists have attempted to create the ideal platform for analyzing distinct anions based on optical sensing techniques (chromogenic and fluorogenic) by assembling different metal-containing units with suitable organic linking molecules and different organic molecules to produce crystalline porous materials. This study presents novel platforms for anion recognition based on reticular chemistry with high selectivity, sensitivity, electronic tunability, structural recognition, strong emission, and thermal and chemical stability. The key materials for reticular chemistry, Metal-Organic Frameworks (MOFs), Zeolitic Imidazolate Frameworks (ZIFs), and Covalent-Organic Frameworks (COFs), and the pre- and post-synthetic modification of the linkers and the metal oxide clusters for the selective detection of the anions, have been discussed. The mechanisms involved in sensing are also discussed.

Copper-Based Metal–Organic Frameworks (MOFs) as an Emerging Catalytic Framework for Click Chemistry

In the extensive terrain of catalytic procedures for the synthesis of organic molecules, metal–organic frameworks (MOFs) as heterogenous catalysts have been investigated in a variety of chemical processes, including Friedel–Crafts reactions, condensation reactions, oxidations, and coupling reactions, and utilized owing to their specific properties such as high porosity, tuneability, extraordinary catalytic activity, and recyclability. The eminent copper-tailored MOF materials can be exceptionally dynamic and regioselective catalysts for click reactions (1,3-dipolar cycloaddition reaction). Considering the fact that Cu(I)-catalyzed alkyne–azide cycloaddition (CuAAC) reactions can be catalyzed by several other copper catalysts such as Cu (II)-β-cyclodextrin, Cu(OAc)2, Fe3O4@SiO2, picolinimidoamide–Cu(II) complex, and Cu(II) porphyrin graphene, the properties of sorption and reusability, as well as the high density of copper-MOFs, open an efficient and robust pathway for regimented catalysis of this reaction. This review provides a comprehensive description and analysis of the relevant literature on the utilization of Cu-MOFs as catalysts for CuAAC ‘click’ reactions published in the past decade.

Highly Active La(III)-Based Metal-Organic Framework as a Heterogeneous Lewis Acid Catalyst for Friedel-Crafts Alkylation

In this study, a novel La(III)-based two-dimensional (2D) metal-organic framework, [La_2/3 (qptca)_1/2 ] (referred to as SLX-2), from LaCl₃ and 1,1' : 4',1'' : 4'',1''' : 4''',1''''-quinquephenyl]-2,2'',2'''',5''-tetracarboxylic acid (H₄ qptca) was synthesized by conventional solvothermal method and thoroughly characterized by using X-ray single-crystal diffraction, powder X-ray diffraction, and thermogravimetric analyses. The 2D SLX-2 features a unique lanthanum center exposed to the skeleton and was used as an efficient Lewis acid catalyst for the Friedel-Crafts alkylation of indole and pyrrole with β-nitrostyrene along with a wide substrate scope, giving the desired products in good-to-high yields under the optimal reaction conditions. Furthermore, the catalyst was used for twenty cycles, with nearly no effect on its activity, and the reaction was heterogeneous in nature. Moreover, compared to the previous hydrogen-bond-donating MOF catalysts for such alkylation reactions, SLX-2 showed an excellent stability toward harsh acidic and basic environment, and gave comparable catalytic activities.

The pioneering role of metal-organic framework-5 in ever-growing contemporary applications - a review

MOF-5 with a Zn(ii) cluster and terephthalic acid is a distinctive porous material among the metal–organic frameworks (MOFs), with unique physical, chemical and mechanical properties. MOF-5 based composites possess ample applications in modern chemistry. Huge surface area, suitable pore dimensions and scope of tunability make MOF-5 noteworthy in advanced materials. The extensive features of MOF-5 provided an opportunity for researchers to explore atomic/molecular scale materials. Various MOF-5 based composites have been designed with revamped properties appropriate to the application by altering and fabricating MOF-5 in situ or using a post-synthetic approach. Surface modification via the dispersion and impregnation of active substances into the pores of MOF-5 enhances its applicability. The boundless topologies and morphologies of MOF-5 combined with other chemical entities has provided opportunities in various fields, including catalysis, gas storage and sensors. The present review illuminates the leading role of MOF-5 and its composites in contemporary applications based on the current literature in heterogeneous catalysis, H₂ and CO₂ storage and sensors.

MOF-5 with a Zn(ii) cluster and terephthalic acid is a distinctive porous material among the metal–organic frameworks (MOFs), with unique physical, chemical and mechanical properties.

Reticular Nanoscience: Bottom-Up Assembly Nanotechnology

The chemistry of metal-organic and covalent organic frameworks (MOFs and COFs) is perhaps the most diverse and inclusive among the chemical sciences, and yet it can be radically expanded by blending it with nanotechnology. The result is reticular nanoscience, an area of reticular chemistry that has an immense potential in virtually any technological field. In this perspective, we explore the extension of such an interdisciplinary reach by surveying the explored and unexplored possibilities that framework nanoparticles can offer. We localize these unique nanosized reticular materials at the juncture between the molecular and the macroscopic worlds, and describe the resulting synthetic and analytical chemistry, which is fundamentally different from conventional frameworks. Such differences are mirrored in the properties that reticular nanoparticles exhibit, which we described while referring to the present state-of-the-art and future promising applications in medicine, catalysis, energy-related applications, and sensors. Finally, the bottom-up approach of reticular nanoscience, inspired by nature, is brought to its full extension by introducing the concept of augmented reticular chemistry. Its approach departs from a single-particle scale to reach higher mesoscopic and even macroscopic dimensions, where framework nanoparticles become building units themselves and the resulting supermaterials approach new levels of sophistication of structures and properties.

Hydrogen-Bonding 2D Coordination Polymer for Enzyme-Free Electrochemical Glucose Sensing

Regular detection of blood glucose levels is a critical indicator for effective diabetes management. Owing to the intrinsic highly sensitive nature of enzymes, the performance of enzymatic glucose sensors is...

Toward Optimal Photocatalytic Hydrogen Generation from Water Using Pyrene-Based Metal-Organic Frameworks

Metal-organic frameworks (MOFs) are promising materials for the photocatalytic H2 evolution reaction (HER) from water. To find the optimal MOF for a photocatalytic HER, one has to consider many different factors. For example, studies have emphasized the importance of light absorption capability, optical band gap, and band alignment. However, most of these studies have been carried out on very different materials. In this work, we present a combined experimental and computation study of the photocatalytic HER performance of a set of isostructural pyrene-based MOFs (M-TBAPy, where M = Sc, Al, Ti, and In). We systematically studied the effects of changing the metal in the node on the different factors that contribute to the HER rate (e.g., optical properties, the band structure, and water adsorption). In addition, for Sc-TBAPy, we also studied the effect of changes in the crystal morphology on the photocatalytic HER rate. We used this understanding to improve the photocatalytic HER efficiency of Sc-TBAPy, to exceed the one reported for Ti-TBAPy, in the presence of a co-catalyst.

Tailoring Heterogeneous Catalysts at the Atomic Level: In Memoriam, Prof. Chia-Kuang (Frank) Tsung

Professor Chia-Kuang (Frank) Tsung made his scientific impact primarily through the atomic-level design of nanoscale materials for application in heterogeneous catalysis. He approached this challenge from two directions: above and below the material surface. Below the surface, Prof. Tsung synthesized finely controlled nanoparticles, primarily of noble metals and metal oxides, tailoring their composition and surface structure for efficient catalysis. Above the surface, he was among the first to leverage the tunability and stability of metal-organic frameworks (MOFs) to improve heterogeneous, molecular, and biocatalysts. This article, written by his former students, seeks first to commemorate Prof. Tsung's scientific accomplishments in three parts: (1) rationally designing nanocrystal surfaces to promote catalytic activity; (2) encapsulating nanocrystals in MOFs to improve catalyst selectivity; and (3) tuning the host-guest interaction between MOFs and guest molecules to inhibit catalyst degradation. The subsequent discussion focuses on building on the foundation laid by Prof. Tsung and on his considerable influence on his former group members and collaborators, both inside and outside of the lab.

Surviving Under Pressure: The Role of Solvent, Crystal Size, and Morphology During Pelletization of Metal-Organic Frameworks

As metal-organic frameworks (MOFs) gain traction for applications, such as hydrogen storage, it is essential to form the as-synthesized powder materials into shaped bodies with high packing densities to maximize their volumetric performance. Mechanical compaction, which involves compressing the materials at high pressure, has been reported to yield high monolith density but often results in a significant loss in accessible porosity. Herein, we sought to systematically control (1) crystal size, (2) solvation, and (3) compacting pressure in the pelletization process to achieve high packing density without compromising the porosity that makes MOFs functional. It was determined that solvation is the most critical factor among the three factors examined. Solvation that exceeds the pore volume prevents the framework from collapsing, allowing for porosity to be maintained through pelletization. Higher pelletization pressure results in higher packing density, with extensive loss of porosity being observed at a higher pressure if the solvation is below the pore volume. Lastly, we observed that the morphology and size of the MOF particles result in variation in the highest achievable packing efficiency, but these numbers (75%) are still greater than many existing techniques used to form MOFs. We concluded that the application of pressure through pelletization is a suitable and widely applicable technique for forming high-density MOF-monoliths.

Template-Mediated Control over Polymorphism in the Vapor-Assisted Formation of Zeolitic Imidazolate Framework Powders and Films

The landscape of possible polymorphs for some metal-organic frameworks (MOFs) can pose a challenge for controlling the outcome of their syntheses. Demonstrated here is the use of a template to control in the vapor-assisted formation of zeolitic imidazolate framework (ZIF) powders and thin films. Introducing a small amount of either ethanol or dimethylformamide vapor during the reaction between ZnO and 4,5-dichloroimidazole vapor results in the formation of the porous ZIF-71 phase, whereas other conditions lead to the formation of the dense ZIF-72 phase or amorphous materials. Time-resolved in situ small-angle X-ray scattering reveals that the porous phase is metastable and can be transformed into its dense polymorph. This transformation is avoided through the introduction of template vapor. The porosity of the resulting ZIF powders and films was studied by N₂ and Kr physisorption, as well as positron annihilation lifetime spectroscopy. The templating principle was demonstrated for other members of the ZIF family as well, including the ZIF-7 series, ZIF-8_Cl, and ZIF-8_Br.

Fabrication of heterostructured Ag/AgCl@g-C3N4@UIO-66(NH2) nanocomposite for efficient photocatalytic inactivation of Microcystis aeruginosa under visible light

In this work, a novel Ag/AgCl@g-C₃N₄@UIO-66(NH₂) heterojunction was constructed for photocatalytic inactivation of Microcystis aeruginosa (M. aeruginosa) under visible light. The photocatalyst was synthesized by a facile method and characterized by XRD, SEM, TEM, BET, XPS, FT-IR, UV-vis DRS, PL and EIS. The nanocomposite can not only provide lots of active sites, but also improve capacities to utilize visible-light energy and effectively transfer charge carriers, thus enhancing removal efficiencies of cyanobacteria (99.9% chlorophyll a was degraded within 180 min). Various factors in photodegradation of chlorophyll a were studied. Besides, changes on cellular morphologies, membrane permeability, physiological activities of M. aeruginosa during photocatalysis were investigated. Moreover, the cycle test indicated that Ag/AgCl@g-C₃N₄@UIO-66(NH₂) exhibits excellent reusability and photocatalytic stability. Finally, a possible mechanism of M. aeruginosa inactivation was proposed. In a word, Ag/AgCl@g-C₃N₄@UIO-66(NH₂) can efficiently inactivate cyanobacteria under visible light, thus providing useful references for further removal of harmful algae in real water bodies.

Atomistic Mechanisms of Thermal Transformation in a Zr-Metal Organic Framework, MIL-140C

To understand the mechanisms responsible for thermal decomposition of a Zr-MOF (MIL-140C), we perform atomistic-scale molecular dynamics (MD) simulations and discuss the simulation data in comparison with the TEM images obtained for the decomposed Zr-MOF. First, we introduce the ReaxFF parameters suitable for the Zr/C/H/O chemistry and then apply them to investigate the thermal stability and morphological changes in the MIL-140C during heating. Based on the performed simulations we propose an atomic mechanism for the collapse of the MIL-140C and the molecular pathways for carbon monoxide formation, the main product of the MIL-140C thermal degradation. We also determine that the oxidation state of the ZrO_x clusters, evolved due to the thermal degradation, approximates the tetragonal phase of ZrO₂. Both simulations and experiments show a distribution of very small ZrO_x clusters embedded in the disrupted organic sheet that could contribute to the unusual high catalytic activity of the decomposed MIL-140C.

Effect of pyridyl donors from organic ligands versus metalloligands on material design

This review illustrates designs and structures of various coordination frameworks constructed using assorted organic ligands and metalloligands offering pyridyl donors to evaluate the impact of flexibility versus rigidity on material design.

A thioridazine hydrochloride electrochemical sensor based on zeolitic imidazolate framework-67-functionalized bio-mobile crystalline material-41 carbon quantum dots

In this research, we introduce an innovative nanocomposite based on ZIF-67/Bio-MCM-41/CQDs in order to fabricate a novel electrochemical sensor at the glassy carbon electrode and for the first time applied for the electrodetermination of the thioridazine hydrochloride.

Rapid spatially-resolved post-synthetic patterning of metal-organic framework films

Reactive inkjet printing was used for fast and facile spatially-controlled post-synthetic patterning of metal-organic framework films. Here, we report use of the reactive inkjet printing technique to rapidly produce patterned electroactive MOF films by covalent attachment of redox-responsive ferrocenyl groups to UiO-66-NH2 on FTO glass. This study paves the way for the wide applicability of reactive printing to MOF film modification.

Postsynthetic Metalated MOFs as Atomically Dispersed Catalysts for Hydroformylation Reactions

A manganese-based metal-organic framework with dipyrazole ligands has been metalated with atomically dispersed Rh and Co species and used as a catalyst for the hydroformylation of styrene. The Rh-based materials exhibited excellent conversion at 80 °C with complete chemoselectivity, high selectivity for the branched aldehyde, high recyclability, and negligible metal leaching.

Recent Advancement of Ullmann Condensation Coupling Reaction in the Formation of Aryl-Oxygen (C-O) Bonding by Copper-Mediated Catalyst

Transition metal-catalyzed chemical transformation of organic electrophiles and organometallic reagents belong to the most important cross coupling reaction in organic synthesis. The biaryl ether division is not only popular in natural products and synthetic pharmaceuticals but also widely found in many pesticides, polymers, and ligands. Copper catalyst has received great attention owing to the low toxicity and low cost. However, traditional Ullmann-type couplings suffer from limited substrate scopes and harsh reaction conditions. The introduction of homogeneous copper catalyst with presence of bidentate ligands over the past two decades has totally changed this situation as these ligands enable the reaction promoted in mild condition. The reaction scope has also been greatly expanded, rendering this copper-based cross-coupling attractive for both academia and industry. In this review, we will highlight the latest progress in the development of useful homogeneous copper catalyst with presence of ligand and heterogeneous copper catalyst in Ullmann type C-O cross-coupling reaction. Additionally, the application of Ullmann type C-O cross coupling reaction will be discussed.

Structural analysis of interpenetrated methyl-modified MOF-5 and its gas-adsorption properties

The first example of an interpenetrated methyl-modified MOF-5 with the formula Zn₄O(DMBDC)₃(DMF)₂, where DMBDC^2- is 2,5-dimethylbenzene-1,4-dicarboxylate and DMF is N,N-dimethylformamide (henceforth denoted as Me₂MOF-5-int), namely, poly[tris(μ₄-2,5-dimethylbenzene-1,4-dicarboxylato)bis(N,N-dimethylformamide)-μ₄-oxido-tetrazinc(II)], [Zn₄(C₁₀H₈O₄)₃O(C₃H₇NO)₂]_n, has been obtained from a solvothermal synthesis of 2,5-dimethylbenzene-1,4-dicarboxylic acid and Zn(NO₃)₂·6H₂O in DMF. A systematic study revealed that the choice of solvent is of critical importance for the synthesis of phase-pure Me₂MOF-5-int, which was thoroughly characterized by single-crystal and powder X-ray diffraction (PXRD), as well as by gas-adsorption analyses. The Brunauer-Emmett-Teller surface area of Me₂MOF-5-int (660 m² g^-1), determined by N₂ adsorption, is much lower than that of nonpenetrated Me₂MOF-5 (2420 m² g^-1). However, Me₂MOF-5-int displays an H₂ uptake capacity of 1.26 wt% at 77 K and 1.0 bar, which is comparable to that of non-interpenetrated Me₂MOF-5 (1.51 wt%).

Fe/Ni Bimetallic Organic Framework Deposited on TiO2 Nanotube Array for Enhancing Higher and Stable Photoelectrochemical Activity of Oxygen Evaluation Reaction

Photoelectrochemical (PEC) water splitting is a promising strategy to improve the efficiency of oxygen evolution reactions (OERs). However, the efficient adsorption of visible light as well as long-term stability of light-harvesting electrocatalysis is the crucial issue in PEC cells. Metal–organic framework (MOF)-derived bimetallic electrocatalysis with its superior performance has wide application prospects in OER and PEC applications. Herein, we have fabricated a nickel and iron bimetallic organic framework (FeNi-MOF) deposited on top of anodized TiO₂ nanotube arrays (TNTA) for PEC and OER applications. The FeNi-MOF/TNTA was incorporated through the electrochemical deposition of Ni²⁺ and Fe³⁺ onto the surface of TNTA and then connected with organic ligands by the hydrothermal transformation. Therefore, FeNi-MOF/TNTA demonstrates abundant photoelectrocatalytic active sites that can enhance the photocurrent up to 1.91 mA/cm² under 100 mW/cm² and a negligible loss in activity after 180 min of photoreaction. The FeNi-MOF-doped photoanode shows predominant photoelectrochemical performance due to the boosted excellent light-harvesting ability, rapid photoresponse, and stimulated interfacial energy of charge separation under the UV-visible light irradiation conditions. The results of this study give deep insight into MOF-derived bimetallic nanomaterial synthesis for photoelectrochemical OER and provide guidance on future electrocatalysis design.

Structural analysis of and selective CO2 adsorption in mixed-ligand hydroxamate-based metal-organic frameworks

Two mixed-ligand metal-organic frameworks, [Zn₂(BDHA)_0.5(INA)₃] (MOF-1: H₂BDHA = benzene-1,4-dihydroxamic acid; HINA = isonicotinic acid) and [Co₂(BDHA)_0.5(INA)₃(DMF)] (MOF-2), were solvothermally synthesized and fully characterized by single-crystal X-ray crystallography as well as N₂, H₂, and CO₂ gas-sorption measurements. The results constitute the first detailed analysis of the bonding environment around the hydroxamates in such MOFs, which are simultaneously decorated with Lewis-basic sites from the hydroxamate moieties and metal sites predisposed for coordinative unsaturation. MOF-2 shows a desirably selective adsorption of CO₂ relative to N₂.

Electronic Structure Modeling of Metal-Organic Frameworks

Owing to their molecular building blocks, yet highly crystalline nature, metal-organic frameworks (MOFs) sit at the interface between molecule and material. Their diverse structures and compositions enable them to be useful materials as catalysts in heterogeneous reactions, electrical conductors in energy storage and transfer applications, chromophores in photoenabled chemical transformations, and beyond. In all cases, density functional theory (DFT) and higher-level methods for electronic structure determination provide valuable quantitative information about the electronic properties that underpin the functions of these frameworks. However, there are only two general modeling approaches in conventional electronic structure software packages: those that treat materials as extended, periodic solids, and those that treat materials as discrete molecules. Each approach has features and benefits; both have been widely employed to understand the emergent chemistry that arises from the formation of the metal-organic interface. This Review canvases these approaches to date, with emphasis placed on the application of electronic structure theory to explore reactivity and electron transfer using periodic, molecular, and embedded models. This includes (i) computational chemistry considerations such as how functional, k-grid, and other model variables are selected to enable insights into MOF properties, (ii) extended solid models that treat MOFs as materials rather than molecules, (iii) the mechanics of cluster extraction and subsequent chemistry enabled by these molecular models, (iv) catalytic studies using both solids and clusters thereof, and (v) embedded, mixed-method approaches, which simulate a fraction of the material using one level of theory and the remainder of the material using another dissimilar theoretical implementation.

Metal-Organic Framework Membranes and Membrane Reactors: Versatile Separations and Intensified Processes

Metal-organic frameworks are an emerging and fascinating category of porous solids that can be self-assembled with metal-based cations linked by organic molecules. The unique features of MOFs in porosity (or surface areas), together with their diversity for chemical components and architectures, make MOFs attractive candidates in many applications. MOF membranes represent a long-term endeavor to convert MOF crystals in the lab to potentially industry-available commodities, which, as a promising alternative to distillation, provide a bright future for energy-efficient separation technologies closely related with chemicals, the environment, and energy. The membrane reactor shows a typical intensified process strategy by combining the catalytic reaction with the membrane separation in one unit. This review highlights the recent process of MOF-based membranes and the importance of MOF-based membrane reactors in relative intensified chemical processes.

Metal-Organic Framework Nanoparticles Induce Pyroptosis in Cells Controlled by the Extracellular pH

Ion homeostasis is essential for cellular survival, and elevated concentrations of specific ions are used to start distinct forms of programmed cell death. However, investigating the influence of certain ions on cells in a controlled way has been hampered due to the tight regulation of ion import by cells. Here, it is shown that lipid-coated iron-based metal-organic framework nanoparticles are able to deliver and release high amounts of iron ions into cells. While high concentrations of iron often trigger ferroptosis, here, the released iron induces pyroptosis, a form of cell death involving the immune system. The iron release occurs only in slightly acidic extracellular environments restricting cell death to cells in acidic microenvironments and allowing for external control. The release mechanism is based on endocytosis facilitated by the lipid-coating followed by degradation of the nanoparticle in the lysosome via cysteine-mediated reduction, which is enhanced in slightly acidic extracellular environment. Thus, a new functionality of hybrid nanoparticles is demonstrated, which uses their nanoarchitecture to facilitate controlled ion delivery into cells. Based on the selectivity for acidic microenvironments, the described nanoparticles may also be used for immunotherapy: the nanoparticles may directly affect the primary tumor and the induced pyroptosis activates the immune system.

Non-Isothermal Kinetics of Kr Adsorption by Nanoporous γ-Mg(BH4)2 from in Situ Synchrotron Powder Diffraction

Crystalline materials with pore dimensions comparable to the kinetic diameters of the guest molecules are attractive for their potential use in adsorption and separation applications. The nanoporous γ-Mg(BH₄)₂ features one-dimensional channels matching this criterion for Kr uptake, which has been probed using synchrotron powder diffraction at various pressures and temperatures. It results in two coexisting crystalline phases with the limiting composition Mg(BH₄)₂·0.66Kr expecting the highest Kr content (50.7 wt % in the crystalline phase) reported for porous materials. Quasi-equilibrium isobars built from Rietveld refinements of Kr site occupancies were rationalized with a noncooperative lattice gas model, yielding the values of the thermodynamic parameters. The latter were independently confirmed from Kr fluorescence. We have also parameterized the pronounced kinetic hysteresis with a modified mean-field model adopted for the Arrhenius kinetics.

Spectroscopy, microscopy, diffraction and scattering of archetypal MOFs: formation, metal sites in catalysis and thin films

A comprehensive overview of characterization tools for the analysis of well-known metal–organic frameworks and physico-chemical phenomena associated to their applications.

A comparative study between Cu(INA)2-MOF and [Cu(INA)2(H2O)4] complex for a click reaction and the Biginelli reaction under solvent-free conditions

The catalytic activity of metal–organic framework Cu(INA)₂ (INA = isonicotinate ion) and the complex [Cu(INA)₂(H₂O)₄] were studied in the Copper-catalyzed Azide–Alkyne Cycloaddition (CuAAC) and Biginelli reaction under solvent-free reaction conditions. The robust, efficient and eco-friendly new method allowed the preparation of a variety of 1,2,3-triazole compounds in good to excellent yields and high selectivity for the 1,4-disubstituted triazole. Moreover, for the Biginelli reaction between aldehydes, ethyl acetoacetate and urea, the corresponding dihydropyrimidinones (DHPMs) were also obtained in satisfactory yields under mild reaction conditions for both catalysts. The comparative study between Cu(INA)₂-MOF and [Cu(INA)₂(H₂O)₄] complex demonstrated better results for the Cu-MOF, for both the yields and the regioselectivity of the products. Furthermore, no change in the heterogeneous catalyst structure was observed after the reaction, allowing them to be recovered and reused without any loss of activity.

The catalytic application of Cu(INA)₂-MOF in click and Biginelli reactions was investigated and a comparative study with the [Cu(INA)₂(H₂O)₄] complex was performed.

The force of MOFs: the potential of switchable metal–organic frameworks as solvent stimulated actuators

The force exerted by flexible metal–organic framework through expansion was experimentally evaluated for MIL-53(Al).

Oriented assembly of copper metal–organic framework membranes as tandem catalysts to enhance C–H hydroxyalkynylation reactions with regiocontrol

The continuous and uniform MOF-based membrane (1a) as a highly efficient heterogeneous catalyst was fabricated on porous Cu foam to significantly outperform bulk crystals 1 to execute C–H hydroxyalkynylation reactions with regiocontrol.

Synthesis of a novel 2D zinc(ii) metal-organic framework for photocatalytic degradation of organic dyes in water

A novel 2D zinc(ii) metal-organic framework, formulated as [Zn(L)(H2O)]·H2O (1) (H2L = 4-(pyridine-4-yl) phthalic acid), has been successfully obtained under solvothermal conditions. This metal-organic framework (MOF) material exhibits efficient photocatalytic activity towards the degradation of organic dyes in the absence of any photosensitizer or cocatalyst. Its catalytic performance for rhodamine B (RhB) and methyl orange (MO) degradation was superior to most reported MOFs with a degradation efficiency of 98.5% for RhB and 83.8% for MO within 120 min in the absence of H2O2, which could be attributed to its high efficiency in generating ·O2- (an effective oxidant for the degradation of dyes). The possible mechanism of the reaction was discussed in detail. In addition, 1 shows stable catalytic efficiency after five reaction cycles, which indicates that 1 exhibits efficient catalytic activity and good reusability toward the degradation of organic dyes, enabling it to be a potential candidate for environmental governance.

Simple Transformation of Hierarchical Hollow Structures by Reduction of Metal-Organic Frameworks and Their Catalytic Activity in the Oxidation of Benzyl Alcohol

Metal-organic framework (MOF)-based derivatives have been found to be promising heterogeneous catalysts for organic transformations. Herein, hollow-structure Cu-MOFs derived by reduction of Cu₃ (BTC)₂ (BTC=1,3,5-benzenetricarboxylate; denoted as RCB) were prepared by using hydrazine hydrate as a reducing agent under various conditions. The influence of hydrazine hydrate induced the structure of Cu₃ (BTC)₂ and led to dynamic variation in the interior and exterior as well as oxidation states of the Cu ion. The synthesized materials were characterized by SEM, TEM, N₂ sorption isotherms, XRD, and XPS. The product of the catalytic reaction was observed by GC-MS. In addition, the prepared RCBs were found to have excellent catalytic activity and selectivity for benzyl alcohol oxidation when assisted by 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO).