Nanostructured rhodamine B/aluminosilicate extracted sugarcane bagasse modified with tobacco-derived carbon quantum dot as ratiometric fluorescence probe for determination of tetracycline

Tetracycline (TC), as a widely used antibiotic, is very useful in treating bacterial infections. However, its residues in animal foodstuffs can enter the human body through the food cycle and causes severe and chronic diseases. On the other hand, due to its weak non-biodegradability, it is considered a threat to the environment. In this regard, the development of sensing methods to detect and measure TC is need of the hour. Herein, a dual-emission fluorescence sensor based on porous aluminosilicate structure (ASS) with rough surface hexagonal shape morphology and pore diameter less than 2 nm was prepared. The porous AAS was modified by post-modification method with blue carbon dots (CDT) and rhodamine B (RB) as two fluorophores to develop the ratiometric fluorescence (RF) sensor (CDT-AAS/RB). Nanostructured CDT-AAS/RB emitted two resolved peaks at 445 and 585 nm , which were dramatically quenched in the presence of TC. The RF sensor, with excellent sensitivity, was able to measure TC over the linear range of 0.001-150 μM with a limit of detection of 5.4 nM in the aqueous phosphate buffer. Moreover, the AAS component granted high selectivity and anti-interference ability to the sensor. In addition, the stability of the sensor was greatly improved due to the non-accumulation of CDT nanoparticles and RB molecules in the presence of the AAS. The proposed method was able to determine TC in complex real samples with satisfactory recovery, and the obtained results were validated with standard high-performance liquid chromatography technique.

Synthesis of graphitic carbon nitride-based nanocomposites and their mechanical properties in epoxy compositions

Thermoset epoxy resins are widely used in research and commercial applications. Zeolite imidazole framework-8 (ZIF-8), graphitic carbon nitride (GCN, g-C3N4), and S-doped graphitic carbon nitride (SCN, S-g-C3N4) composites were synthesized as accelerators and their effects on the physical properties of epoxies were examined. An ultrasound-assisted method was used to prepare ZIF-8/GCN and ZIF-8/SCN nanocomposites while g-C3N4 and S-g-C3N4 were prepared from the calcination of melamine and thiourea, respectively. The surface morphology, and particle size were characterized by scanning electron microscopy, and X-ray diffraction. The properties of synthesized nanocomposites were measured using Fourier-transform infrared spectroscopy. After the accelerator was added to the epoxy composites, their activation energies were calculated using differential scanning calorimetry. The tensile strength and flexural strength were measured using a universal testing machine and impact strength was measured by using an Izod impact strength tester. The impact strength of ZIF-8/SCN nanocomposites was enhanced by 45.2%. The storage stability of the epoxy compositions with different catalysts was evaluated by measuring the variation of viscosity with time at a constant temperature.

Preparation of ZIF-67/C3N4 composite material and adsorption of tetracycline hydrochloride

In recent years, wastewater treatment to remove tetracycline hydrochloride (TCH) has received much attention in water treatment problems. ZIF-67/C3N4 composite adsorbent, a nanosheet structured material stacked with MOFs, was prepared by in situ growth method, which has high adsorption activity for tetracycline hydrochloride in wastewater. Comparing the effect of monomeric and composite adsorbents, Z6C2 had the best adsorption effect (206 mg·g-1), which was 77.6% higher than that of ZIF-67 (116 mg·g-1) and 10.8 times higher than that of C3N4 (19 mg·g-1). The structure of ZIF-67 stacked on C3N4 nanosheets has an excellent specific surface area and number of active sites, as well as π-π interactions, electrostatic interactions, and hydrogen bonding interactions between the adsorbent and TCH, which combine to enhance the adsorption performance. The adsorption process is accompanied by a combination of chemisorption, mass transport, and internal diffusion rate-limiting. It was shown that the adsorption process is favorable for monolayer adsorption as well as a heat absorption reaction that proceeds spontaneously. The adsorbent exhibits good stability and adsorption capacity, which may be suitable for efficient and low-cost water purification.

Insights into the Degradation Mechanisms of TCH by Magnetic Fe3S4/Cu2O Composite

Unique Fe₃S₄/Cu₂O composites were constructed with high Fenton-like photocatalytic activity through the impregnation coprecipitation method. The structure, morphology, optical, magnetic, and photocatalytic properties of the as-prepared composites were explored in detail. The findings suggest that small Cu₂O particles were grown on the surface of Fe₃S₄. The removal efficiency of TCH by Fe₃S₄/Cu₂O was 65.7, 4.75, and 3.67 times higher than that of pure Fe₃S₄, Cu₂O, and the Fe₃S₄ + Cu₂O mixture, respectively, when the mass ratio of Fe₃S₄ and Cu₂O was 1:1 at pH 7.2. The synergistic effect between Cu₂O and Fe₃S₄ was the main factor for TCH degradation. The Cu⁺ species from Cu₂O increased the Fe³⁺/Fe²⁺ cycle during the Fenton reaction. ^•O₂^- and h⁺ were the main active radicals; however, ^•OH and e^- played the second role in the photocatalytic degradation reaction. Moreover, the Fe₃S₄/Cu₂O composite retained good recyclability and versatility, and could be conveniently separated by a magnet.

Calf thymus ds-DNA intercalation with pendimethalin herbicide at the surface of ZIF-8/Co/rGO/C3N4/ds-DNA/SPCE; A bio-sensing approach for pendimethalin quantification confirmed by molecular docking study

Pendimethalin (PND) is a herbicide that is regarded to be possibly carcinogenic to humans and toxic to the environment. Herein, we fabricated a highly sensitive DNA biosensor based on ZIF-8/Co/rGO/C₃N₄ nanohybrid modification of a screen-printed carbon electrode (SPCE) to monitor PND in real samples. The layer-by-layer fabrication pathway was conducted to construct ZIF-8/Co/rGO/C₃N₄/ds-DNA/SPCE biosensor. The physicochemical characterization techniques confirmed the successful synthesis of ZIF-8/Co/rGO/C₃N₄ hybrid nanocomposite, as well as the appropriate modification of the SPCE surface. The utilization of ZIF-8/Co/rGO/C₃N₄ nanohybrid as a modifier was analyzed using. The electrochemical impedance spectroscopy results showed that the modified SPCE exhibited significantly lowered charge transfer resistance due to the enhancement of its electrical conductivity and facilitation of the transfer of charged particles. The proposed biosensor successfully quantified PND in a wide concentration range of 0.01-35 μM, with a limit of detection (LOD) value of 8.0 nM. The PND monitoring capability of the fabricated biosensor in real samples including rice, wheat, tap, and river water samples was verified with a recovery range of 98.2-105.6%. Moreover, to predict the interaction sites of PND herbicide with DNA, the molecular docking study was performed between the PND molecule and two sequence DNA fragments and confirmed the experimental findings. This research sets the stage for developing highly sensitive DNA biosensors that will be used to monitor and quantify toxic herbicides in real samples by fusing the advantages of nanohybrid structures with crucial knowledge from a molecular docking investigation.

Highly efficient degradation of reactive black KN-B dye by ultraviolet light responsive ZIF-8 photocatalysts with different morphologies

Zeolitic imidazolate framework ZIF-8, a type of metal-organic framework, has diverse applications in multiple catalytic fields due to its outstanding properties. Herein, ZIF-8 photocatalysts with three different morphologies (dodecahedral, pitaya-like, and leaf-like) are successfully synthesized under ambient conditions from zinc salts by altering the volume ratio of methanol and water used as a solvent. The as-synthesized ZIFs have high crystallinity with distinct BET surface areas. The experiments indicate that the ZIFs have high photocatalytic efficiency, in which the leaf-like structure (ZIF-8-F3) is the most efficient in the degradation of reactive black KN-B dye (RB5) under 365 nm UV irradiation. This is due to the efficient inhibition of electron-hole recombination or the higher migration of charge carriers in ZIF-8-F3, thus producing more reactive oxygen species, resulting in greater photocatalytic efficiency. At pH = 11, more than 95% of RB5 is degraded within 2 hours when using 1.0 g L^-1 of ZIF-8-F3. Besides, the photocatalytic and kinetic performances of ZIF-8-F3 are also investigated by optimizing the pH, initial RB5 concentration, and dosage of the used catalyst. These ZIF-8-F3 plates have been shown to be a promising material with high photostability and effective reusability, beneficial to various potential applications in environmental remediation issues.

MoSe2-modified ZIF-8 novel nanocomposite for photocatalytic remediation of textile dye and antibiotic-contaminated wastewater

COVID-19-led antibiotic waste generated from hospitals and health centres may cause serious health issues and significantly impact the environment. In the coming decades, antibiotic resistance will be one of the most significant threats to global human health. Photocatalytic water remediation is an effective and promising environmental solution that can be utilized to address this issue, to convert antibiotic waste into non-toxic products by utilizing renewable and abundant solar energy. In the present study, a novel nanocomposite of zeolitic imidazolate frameworks (ZIF-8) and molybdenum diselenide (MoSe₂) was efficiently synthesized by the solvothermal method for the complete degradation of the antibiotics and textile waste from water. The morphology, crystallinity and band gap of the samples were characterized by field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD) and UV-visible spectroscopy. Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) provide the binding information of the sample. The photocatalytic activity was tested for degradation of the antibiotics (tetracycline hydrochloride (TC) and metronidazole (MNZ)) used in COVID-19 treatment and textile dye (malachite green). Time-resolved photoluminescence spectroscopy confirmed the enhanced charge separation in the MoSe₂@ZIF-8 nanocomposite with an average lifetime of 4.72 ns as compared to pristine samples. The nanocomposite showed ~ 100% removal efficiency with rate constants of 63 × 10^-3, 49 × 10^-3 and 42 × 10^-3 min^-1 for TC, MNZ and malachite green, respectively. The photocatalytic degradation of TC was carried out under different pH conditions (4, 7 and 9), and the degradation mechanism was explained on the basis of zeta potential measurements and active species trapping experiment. The by-products of the photocatalytic treatment of TC antibiotics were tested using liquid chromatography-mass spectroscopy (LC-MS), and they were found to be non-toxic for aquatic and human life. The regeneration property of the nanocomposite was confirmed by FESEM with regeneration efficiency of 88.7% in the 4th cycle. Thus, MoSe₂@ZIF-8-based photocatalysts have potential application in water remediation, especially in making the antibiotic waste less toxic.

Highly Efficient Bi4Ti3O12/g-C3N4/BiOBr Dual Z-Scheme Heterojunction Photocatalysts with Enhanced Visible Light-Responsive Activity for the Degradation of Antibiotics

A novel Bi₄Ti₃O₁₂/g-C₃N₄/BiOBr(BTO/CN/BOB) composite was synthesized by a solvothermal-mechanical mixed thermal method. The composition, structure, and micromorphology of the samples were analyzed. The BTO/CN/BOB composite photocatalyst shows better photocatalytic performance for tetracycline hydrochloride (TC) degradation compared to Bi₄Ti₃O₁₂ and binary composite photocatalysts. The highest degradation rate of TC can reach 89.84% using the BTO/CN/BOB photocatalyst under the optimal conditions, and BTO/CN/BOB still exhibits good photocatalytic properties after recycling. Moreover, it also shows good photodegradation activity for different kinds of antibiotics, implying its wide application prospect. The photocatalytic performance and reuse stability of BTO/CN/BOB were significantly improved, which may be because of the enhanced spectral absorption range and efficient electron transfer capability by the synergistic effect and interaction among Bi₄Ti₃O₁₂, BiOBr, and g-C₃N₄. Finally, the possible degradation pathway and electron transfer mechanism of the dual Z-scheme heterojunction are proposed.

Novel 3D cross-shaped Zn/Co bimetallic zeolite imidazolate frameworks for simultaneous removal Cr(VI) and Congo Red

The photocatalytic properties of Zn/Co zeolite imidazolate frameworks (ZIF-ZnCo) prepared by various Zn/Co ratio are of significantly diversity due to the morphology structure of the ZIF-ZnCo. Thereinto, the prepared ZIF-ZnCO-8:1 is excellent capability by virtue of its 3D cross-shaped structure. Spectral test results show that as-prepared novel 3D cross-shaped ZIF-ZnCo has a lower recombination rate of electron and hole pairs than the lamellar and dodecahedral, thus improving the photocatalytic ability. The photocatalytic ability of 3D cross-shaped ZIF-ZnCo was carefully investigated for removing mixed solution of Congo Red (CR) and Cr(VI). The photocatalytic reduction ability of 3D cross-shaped ZIF-ZnCo was 22% higher than ZIF-8 for Cr(VI). Meanwhile, CR was altogether removed at dark processing and Cr(VI) was removed 70% after dark processing 120 min and photocatalytic 240 min. Therefore, the high adsorption and photocatalytic capacity denote the potential application of 3D cross-shaped ZIF-ZnCo.

Filling Polyoxoanions into MIL-101(Fe) for Adsorption of Organic Pollutants with Facile and Complete Visible Light Photocatalytic Decomposition

Transition metal-substituted polyoxometalates (POMs) were filled into a metal–organic framework (MOF) to construct a series of POM@MOF composites (PMo₁₂O₄₀@MIL-101, PMo₁₁VO₄₀@MIL-101, PMo₁₀V₂O₄₀@MIL-101). The composite materials possess ultra-high adsorption ability, especially for PMo₁₀V₂O₄₀@MIL-101, with an adsorption capacity of 912.5 mg·g⁻¹ for cationic antibiotic tetracycline in wastewater, much higher than that of isolated MIL-101(Fe) and the commonly used adsorption materials, such as activated carbon and graphene oxide. In particular, they can be used as efficient photocatalysts for the photodegradation of antibiotics under visible light irradiation. The complete photodegradation of the adsorbed species can induce the facile reusability of these composites for multiple cycles. This work opens an avenue to introduce POMs into an MOF matrix for the simultaneous adsorption and photodegradation of antibiotics.

Determination of D&C Red 33 and Patent Blue V Azo dyes using an impressive electrochemical sensor based on carbon paste electrode modified with ZIF-8/g-C3N4/Co and ionic liquid in mouthwash and toothpaste as real samples

Synthetic azo dyes are widely used in a variety of industries, but many of them pose a risk to human health, particularly when consumed in large quantities. As a result, their existence in products should be closely monitored. D&C red 33 and Patent Blue V are mostly used in cosmetics, especially in toothpaste and mouthwashes. A novel carbon paste electrode modified with ZIF-8/g-C3N4/Co nanocomposite and 1-methyl-3-butylimidazolium bromide as an ionic liquid was employed as a highly sensitive reproducible electrochemical sensor for the simultaneous determination of these common dyes. ZIF structure has unique properties such as high surface area, suitable conductivity, and excellent porosity. The electrochemical behavior of the suggested electrode was investigated by cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). To characterize the synthesized nanocomposites, scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) were applied to investigate the structure of nanocomposites. Under the optimized conditions, the modified sensor offered a wide linear concentration range 0.08-10 μM (R2 = 0.9906) and 10-900 μM (R2 = 0.9932) with a low limit of detection of 0.034 μM. The value of diffusion coefficient (D), and the electron transfer coefficient (α) was calculated to be 310 × 10-5, and 0.9 respectively. This technique offered a successful performance for the determination of target analyte in the real samples with acceptable results between 96% and 107%.

Interfacial band bending induced charge-transfer regulation over Ag@ZIF-8@g-C3N4 to boost photocatalytic CO2 reduction into syngas

The use of the AZC-10 heterostructure enables excellent syngas production rates of 4076.4 μmol gcatalyst−1 h−1 and 3326.55 μmol gcatalyst−1 h−1 for CO and H2, respectively, much higher than other reported photocatalysts.

Engineering of g-C3N4-based photocatalysts to enhance hydrogen evolution

The technology of photocatalytic hydrogen production that converts abundant yet intermittent solar energy into an environmentally friendly alternative energy source is an attractive strategy to mitigate the energy crisis and environmental pollution. Graphitic carbon nitride (g-C₃N₄), as a promising photocatalyst, has gradually received focus in the field of artificial photosynthesis due to its appealing optical property, high chemical stability and easy synthesis. However, the limited light absorption and massive recombination of photoinduced carriers have hindered the photocatalytic activity of bare g-C₃N₄. Therefore, from the perspective of theoretical calculations and experiments, many valid approaches have been applied to rationally design the photocatalyst and ameliorate the hydrogen production performance, such as element doping, defect engineering, morphology tuning, and semiconductor coupling. This review summarized the latest progress of g-C₃N₄-based photocatalysts from two perspectives, modification of pristine g-C₃N₄ and interfacial engineering design. It is expected to offer feasible suggestions for the fabrication of low-cost and high-efficiency photocatalysts and the photocatalytic mechanism analyses assisted by calculation in the near future. Finally, the prospects and challenges of this exciting research field are discussed.

Degradation of diclofenac in water under LED irradiation using combined g-C3N4/NH2-MIL-125 photocatalysts

This study reports the photocatalytic degradation of diclofenac by hybrid materials prepared by combination of graphitic carbon nitride (g-C₃N₄) and titanium-metal organic framework (NH₂-MIL-125), in different mass proportions (MOF:C₃N₄ of 25:75, 50:50 and 75:25). The hybrid materials were fully characterized, and their properties compared to those of the individual components, whose presence was confirmed by XRD. The porous structure was the result of the highly microporous character of the MOF and the non-porous one of g-C₃N₄. The band gap values were very close to that of MOF component. Photoluminescence measurements suggested an increase on the recombination rate associated to the presence of g-C₃N₄. Photodegradation tests of diclofenac (10 mg·L^-1) were performed under UV LED irradiation at 384 nm. The hybrid materials showed higher photocatalytic activity than the individual components, suggesting the occurrence of some synergistic effect. The photocatalyst with a MOF:g-C₃N₄ ratio of 50:50 yielded the highest conversion rate, allowing complete disappearance of diclofenac in 2 h. Experiments with scavengers showed that superoxide radicals and holes played a major role in the photocatalytic process photodegradation, being that of hydroxyl radicals less significant. From the identification of by-products species, a degradation pathway was proposed for the degradation of diclofenac under the experimental operating conditions.

Ruthenium(II) complexes coordinated to graphitic carbon nitride: Oxygen self-sufficient photosensitizers which produce multiple ROS for photodynamic therapy in hypoxia

The photodynamic therapy (PDT) of cancer is limited by tumor hypoxia as PDT efficiency depends on O₂ concentration. A novel oxygen self-sufficient photosensitizer (Ru-g-C₃N₄) was therefore designed and synthesized via a facile one-pot method in order to overcome tumor hypoxia-induced PDT resistance. The photosensitizer is based on [Ru(bpy)₂]²⁺ coordinated to g-C₃N₄ nanosheets by Ru-N bonding. Compared to pure g-C₃N₄, the resulting nanosheets exhibit increased water solubility, stronger visible light absorption, and enhanced biocompatibility. Once Ru-g-C₃N₄ is taken up by hypoxic tumor cells and exposed to visible light, the nanosheets not only catalyze the decomposition of H₂O₂ and H₂O to generate O₂, but also catalyze H₂O₂ and O₂ concurrently to produce multiple ROS (^•OH, ^•O₂^-, and ¹O₂). In addition, Ru-g-C₃N₄ affords luminescence imaging, while continuously generating O₂ to alleviate hypoxia greatly improving PDT efficacy. To the best of our knowledge, this oxygen self-sufficient photosensitizer produced via grafting a metal complex onto g-C₃N₄ is the first of its type to be reported.

State-of-the-art developments in carbon-based metal nanocomposites as a catalyst: photocatalysis

The rapid progress of state-of-the-art carbon-based metals as a catalyst is playing a central role in the research area of chemical and materials engineering for effective visible-light-induced catalytic applications. Numerous admirable catalysts have been fabricated, but significant challenges persist to lower the cost and increase the action of catalysts. The development of carbon-based nanostructured materials (i.e., activated carbon, carbon nitride, graphite, fullerenes, carbon nanotubes, diamond, graphene, etc.) represents an admirable substitute to out-of-date catalysts. Significant efforts have been made by researchers toward the improvement of various carbon-based metal nanostructures as catalysts. Moreover, incredible development has been achieved in several fields of catalysis, such as visible-light-induced catalysis, electrochemical performance, energy storage, and conversion, etc. This review gives an overview of the up-to-date developments in the strategy of design and fabrication of carbon-based metal nanostructures as photo-catalysts by means of several methods within the green approach, including chemical synthesis, in situ growth, solution mixing, and hydrothermal approaches. Moreover, the photocatalytic effects of the resulting carbon-based nanostructure classifications are similarly deliberated relative to their eco-friendly applications, such as photocatalytic degradation of organic dye pollutants.

Emerging Hybrid Nanocomposite Photocatalysts for the Degradation of Antibiotics: Insights into Their Designs and Mechanisms

The raising occurrence of antibiotics in the global water bodies has received the emerging concern due to their potential threats of generating the antibiotic-resistive and genotoxic effects into humans and aquatic species. In this direction, the solar energy assisted photocatalytic technique offers a promising solution to address such emerging concern and paves ways for the complete degradation of antibiotics with the generation of less or non-toxic by-products. Particularly, the designing of hybrid photocatalyticcomposite materials has been found to show higher antibiotics degradation efficiencies. As the hybrid photocatalysts are found as the systems with ideal characteristic properties such as superior structural, surface and interfacial properties, they offer enhanced photoabsorbance, charge-separation, -transfer, redox properties, photostability and easy recovery. In this context, this review study presents an overview on the recent developments in the designing of various hybrid photocatalytic systems and their efficiency towards the degradation of various emerging antibiotic pharmaceutical contaminants in water environments.

Conventional and emerging technologies for removal of antibiotics from wastewater

Antibiotics and pharmaceuticals related products are used to enhance public health and quality of life. The wastewater that is produced from pharmaceutical industries still contains noticeable amount of antibiotics, and this has remained one of the major environmental problems facing public health. The conventional wastewater remediation approach employed by the pharmaceutical industries for the antibiotics wastewater removal is unable to remove the antibiotics completely. Besides, municipal and livestock wastewater also contain unmetabolized antibiotics released by human and animal, respectively. The antibiotic found in wastewater leads to antibiotic resistance challenges, also emergence of superbugs. Currently, numerous technological approaches have been developed to remove antibiotics from the wastewater. Therefore, it was imperative to critically review the weakness and strength of these current advanced technological approaches in use. Besides, the conventional methods for removal of antibiotics such as Klavaroti et al., Homem and Santos also discussed. Although, membrane treatment is discovered as the ultimate choice of approach, to completely remove the antibiotics, while the filtered antibiotics are still retained on the membrane. This study found, hybrid processes to be the best solution antibiotics removal from wastewater. Nevertheless, real-time monitoring system is also recommended to ascertain that, wastewater is cleared of antibiotics.

Hybridized 2D Nanomaterials Toward Highly Efficient Photocatalysis for Degrading Pollutants: Current Status and Future Perspectives

Organic pollutants including industrial dyes and chemicals and agricultural waste have become a major environmental issue in recent years. As an alternative to simple adsorption, photocatalytic decontamination is an efficient and energy-saving technology to eliminate these pollutants from water environment, utilizing the energy of external light, and unique function of photocatalysts. Having a large specific surface area, numerous active sites, and varied band structures, 2D nanosheets have exhibited promising applications as an efficient photocatalyst for degrading organic pollutants, particularly hybridization with other functional components. The novel hybridization of 2D nanomaterials with various functional species is summarized systematically with emphasis on their enhanced photocatalytic activities and outstanding performances in environmental remediation. First, the mechanism of photocatalytic degradation is given for discussing the advantages/shortcomings of regular 2D materials and identifying the importance of constructing hybrid 2D photocatalysts. An overview of several types of intensively investigated 2D nanomaterials (i.e., graphene, g-C₃ N₄ , MoS₂ , WO₃ , Bi₂ O₃ , and BiOX) is then given to indicate their hybridized methodologies, synergistic effect, and improved applications in decontamination of organic dyes and other pollutants. Finally, future research directions are rationally suggested based on the current challenges.

A "half" core-shell magnetic nanohybrid composed of zeolitic imidazolate framework and graphitic carbon nitride for magnetic solid-phase extraction of sulfonylurea herbicides from water samples followed by LC-MS/MS detection

A "half" core-shell g-C₃N₄/Fe₃O₄@ZIF-8 nanohybrid, in which Fe₃O₄ and zeolite imidazolate framework-8 (ZIF-8) constructed the core-shell structure, was successfully fabricated via a versatile in situ growth strategy. This nanohybrid was employed for simultaneous magnetic solid-phase extraction (MSPE) of trace levels of fifteen target sulfonylurea herbicides (SUHs) in environmental water samples followed by LC-MS/MS detection. C₃N₄ nanosheets were first prepared by liquid exfoliation of bulk g-C₃N₄, after which Fe₃O₄ nanoparticles were uniformly deposited onto the surface of C₃N₄ nanosheets, and ZIF-8 nanoparticles were grown on the surface of g-C₃N₄/Fe₃O₄ by anchoring Zn²⁺ on g-C₃N₄/Fe₃O₄. Owing to the synergistic effect, the hybridization of C₃N₄ and ZIF-8 endowed the nanohybrid with higher multi-target adsorption ability for SUHs compared to pure C₃N₄ or ZIF-8. The separation as well as the enrichment processes were facilitated using Fe₃O₄ as a magnetic core. The influence of various parameters on MSPE efficiency, including adsorbent dosage, extraction time, solution pH, and desorption solvent and its volume, was investigated in detail. Under optimal conditions, the MSPE coupled with LC-MS/MS exhibited good linearity ranging from 0.5 to 100 μg L^-1 with correlation coefficients (R²) ≥ 0.9919, high sensitivity with low limits of detection (LODs) of 0.005-0.141 μg L^-1 and satisfactory recoveries of 67.4-105.5% with relative standard deviations (RSDs) < 9.8%. These results indicate that this method is reliable for the determination of SUHs in different matrices and the in situ growth strategy is a promising approach for constructing effective adsorbents. Graphical abstract Schematic representation of a "half" core-shell magnetic nanohybrid composed of zeolitic imidazolate framework (ZIF-8) and graphitic carbon nitride (g-C₃N₄) for magnetic solid-phase extraction (MSPE) of trace level determination of fifteen sulfonylurea herbicides (SUHs) in environmental water samples using LC-MS/MS detection.

Polyaniline modified MIL-100(Fe) for enhanced photocatalytic Cr(VI) reduction and tetracycline degradation under white light

The Z-scheme MIL-100(Fe)/PANI composite photocatalysts were facilely prepared from MIL-100(Fe) and polyaniline (PANI) by ball-milling, and were characterized by powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), transmission electron microscopy (TEM), UV-visible diffuse-reflectance spectrometry (UV-vis DRS), X-ray photoelectron spectroscopy (XPS) and photoluminescence emission spectrometry (PL). The photocatalytic activities of MIL-100(Fe)/PANI composites were investigated via tetracycline degradation and hexavalent chromium reduction in aqueous solution under the irradiation of white light. The results revealed that the MIL-100(Fe)/PANI composite photocatalysts exhibited outstanding photocatalytic activities toward Cr(VI) reduction and tetracycline decomposition. The effects of pH and coexisting ions on the photocatalytic Cr(VI) reduction were investigated. As well, the primary active species were identified via electron spin resonance (ESR) determination. A possible Z-scheme photocatalyst mechanism was proposed and verified. Finally, MIL-100(Fe)/PANI composites demonstrated good reusability and stability in water solution, implying potentially practical applications for real wastewater treatment.

ZIF-mediated N-doped hollow porous carbon as a high performance adsorbent for tetracycline removal from water with wide pH range

The N-doped porous carbon (NPC) and N-doped hollow porous carbons (NHPC-1 and NHPC-2) were fabricated using ZIF-8 and its composites (resorcinol and formaldehyde coated ZIF-8, ZIF-8@RF and tannic acid coated ZIF-8, ZIF-8@TA) as precursors via high-temperature pyrolysis and their applications for removing tetracycline (TC) from water were investigated. The various technologies, including SEM, TEM, FT-IR, Raman, N₂ adsorption-desorption, XRD and XPS were used to characterize the morphology, textual property, phase and microstructure of three porous carbon materials. The adsorption isotherms and kinetics of TC on three porous carbon materials were fitted well with Langmuir model and pseudo-2nd order model, respectively. In terms of the Langmuir model, the maximum TC adsorption capacities on the NPC, NHPC-1 and NHPC-2 were 180.2, 284.9 and 518.1 mg g^-1 at 25 °C, respectively. The excellent performance of NHPC-2 for TC removal is mainly attributed to the suitable pore size distribution and pore volume, high nitrogen contents and large amounts of defects. High TC adsorption was achieved in 3-10 pH range and hardly affected by humic acid. TC adsorption on NHPC-2 is spontaneous and endothermic process. The NHPC-2 kept excellent TC adsorption capacity even after eight cycles, showing its good repeatability. Our result indicates that the MOF-mediated N-doped hollow porous carbon is promising for the TC removal from aqueous media.

Recent advances in MOF-based photocatalysis: environmental remediation under visible light

Highly photoactive MOFs can be engineered via various strategies for the purpose of extended visible light absorption, more efficient generation, separation and transfer of charge carriers, as well as good recyclability.

Tailoring aromatic ring-terminated edges of g-C3N4 nanosheets for efficient photocatalytic hydrogen evolution with simultaneous antibiotic removal

A promising “one stone three birds” route to enhance photocatalytic H₂ production with simultaneous organic pollutant removal activity.

g-C3N4/Uio-66-NH2 nanocomposites with enhanced visible light photocatalytic activity for hydrogen evolution and oxidation of amines to imines

g-C₃N₄/Uio-66-NH₂ (CNUIO) nanocomposites were prepared by growing an NH₂-mediated zirconium-based metal–organic framework (Uio-66-NH₂) in the presence of g-C₃N₄ nanotubes.

Mpg-C3N4-ZIF-8 composites for the degradation of tetracycline hydrochloride using visible light

It was found that mesoporous graphite carbon nitride (mpg-C₃N₄) prepared using melamine as the precursor and ammonium chloride as the bubble template, has good photocatalytic activity under visible light irradiation. In order to improve the photocatalytic performance of mpg-C₃N₄, it was combined with metal-organic framework ZIF-8. Taking tetracycline hydrochloride (TC) solution as a model pollutant, the photocatalytic activity of composites was studied to select the optimal composite ratio and pH value. The initial concentration of hydrogen peroxide and active oxidation species were also investigated. The results showed that when the loading of ZIF-8 was 40 wt%, the removal efficiency was the best and 74.8% of TC could be removed. The degradation efficiency of TC was negatively affected under extreme pH conditions, but the composite photocatalyst mpg-C₃N₄-ZIF-8 had a relatively higher degradation efficiency on TC at mild pH values (4-8). The removal efficiency was the best at pH 8, and 75.1% of TC could be removed; the adsorption capacity was 430.7 mg·g^-1 and the photodegradation capacity was 548.6 mg·g^-1. The order of active species affecting the photocatalytic degradation of TC by mpg-C₃N₄-ZIF-8 was hole > superoxide radical > hydroxyl radical.

Affinity-Based Detection of Biomolecules Using Photo-Electrochemical Readout

Detection and quantification of biologically-relevant analytes using handheld platforms are important for point-of-care diagnostics, real-time health monitoring, and treatment monitoring. Among the various signal transduction methods used in portable biosensors, photoelectrochemcial (PEC) readout has emerged as a promising approach due to its low limit-of-detection and high sensitivity. For this readout method to be applicable to analyzing native samples, performance requirements beyond sensitivity such as specificity, stability, and ease of operation are critical. These performance requirements are governed by the properties of the photoactive materials and signal transduction mechanisms that are used in PEC biosensing. In this review, we categorize PEC biosensors into five areas based on their signal transduction strategy: (a) introduction of photoactive species, (b) generation of electron/hole donors, (c) use of steric hinderance, (d) in situ induction of light, and (e) resonance energy transfer. We discuss the combination of strengths and weaknesses that these signal transduction systems and their material building blocks offer by reviewing the recent progress in this area. Developing the appropriate PEC biosensor starts with defining the application case followed by choosing the materials and signal transduction strategies that meet the application-based specifications.

ZIF-67-Derived 3D Hollow Mesoporous Crystalline Co3 O4 Wrapped by 2D g-C3 N4 Nanosheets for Photocatalytic Removal of Nitric Oxide

ZIF-67-derived 3D hollow mesoporous crystalline Co₃ O₄ wrapped by 2D graphitic carbon nitride (g-C₃ N₄ ) nanosheets are prepared by low temperature annealing, and are used for the photocatalytic oxidation of nitric oxide (NO) at a concentration of 600 ppb. The p-n heterojunction between Co₃ O₄ and g-C₃ N₄ forms a spatial conductive network frame and results in a broad visible light response range. The hollow mesoporous structure of Co₃ O₄ contributes to the circulation and adsorption of NO, and the large specific surface area exposes abundant active sites for the reaction of active species. A maximum NO degradation efficiency of 57% is achieved by adjusting the mass of the Co₃ O₄ precursor. Cycling tests and X-ray diffraction indicate the high stability and recyclability of the composite, making it promising in environmental purification applications.

Mechanistic Insight into Photocatalytic Pathways of MIL-100(Fe)/TiO2 Composites

The integration of metal-organic frameworks (MOFs) with semiconductors has attracted mounting attention for photocatalytic applications. However, more efforts are needed to unravel the interface structure in MOF/semiconductor composites and its role in charge transfer. Herein, a MIL-100(Fe)/TiO₂ composite was synthesized as a prototypical photocatalyst and studied systematically to explore the interface structure and unravel the charge transfer pathways during the photocatalytic processes. The composite was fabricated by growing MIL-100(Fe) crystals on TiO₂ using surface-coated FeOOH as the precursor. The as-prepared MIL-100(Fe)/TiO₂ exhibited significantly improved photocatalytic performance over pristine TiO₂, which was mainly because of the enhanced charge separation as confirmed by transient absorption spectroscopy analysis. This enhancement partially arose from the special chemical structure at the interface, where the Fe-O-Ti bond was formed. As verified by the density functional theory calculation, this distinct structure would create defect energy levels adjacent to the valence band maximum of TiO₂. During the photocatalytic processes, the defect energy levels serve as sinks to capture excited charge carriers and retard the recombination, which subsequently leads to the increased charge density and promoted photocatalytic efficiency. Meanwhile, the intimate interactions between MIL-100(Fe) and TiO₂ would also help to improve the charge separation by transferring photo-induced holes through the ligands to Fe-O clusters. These findings would advance the fundamental understanding of the interface structure and the charge transfer pathways in MOF/semiconductor composite photocatalysts.

Cobalt oxide loaded graphitic carbon nitride as adsorptive photocatalyst for tetracycline removal from aqueous solution

The treatment of antibiotic-containing wastewater is of great importance due to the potential threats of antibiotics to human and the ecosystem. We reported the preparation of cobalt oxide loaded graphitic carbon nitride (CoO/g-C₃N₄) by an impregnation-calcination method for tetracycline (TC) removal from aqueous solution. The developed CoO/g-C₃N₄ exhibited high adsorption capacity and fast adsorption kinetic for TC due to the complexation of TC with surface loaded CoO. In particular, 7%CoO/gC₃N₄3 sample presented a maximum TC adsorption capacity of 391.4 mg g^-1. It was found that Langmuir and pseudo-second order kinetic models fitted TC adsorption process well. Further photocatalytic studies showed that CoO loaded g-C₃N₄ was active for TC photodegradation, although the photocatalytic reaction rate constant was lower than that of native g-C₃N₄. CoO nanoparticles loading on g-C₃N₄ played the major role of adsorption sites rather than cocatalyst for photocatalysis. We believe that the developed CoO/g-C₃N₄ could be a potential adsorptive photocatalyst for antibiotic pollutants removal from wastewater.

A Review on the Synthesis and Characterization of Metal Organic Frameworks for Photocatalytic Water Purification

This review analyzes the preparation and characterization of metal organic frameworks (MOFs) and their application as photocatalysts for water purification. The study begins by highlighting the problem of water scarcity and the different solutions for purification, including photocatalysis with semiconductors, such as MOFs. It also describes the different methodologies that can be used for the synthesis of MOFs, paying attention to the purification and activation steps. The characterization of MOFs and the different approaches that can be followed to learn the photocatalytic processes are also detailed. Finally, the work reviews literature focused on the degradation of contaminants from water using MOF-based photocatalysts under light irradiation.

Nanomaterials for treating emerging contaminants in water by adsorption and photocatalysis: Systematic review and bibliometric analysis

Emerging contaminants in the aquatic environment have become a worldwide problem. Conventional wastewater treatment processes are ineffective for eliminating the emerging contaminants at trace concentrations. Nanomaterials possessing novel size-dependent properties, however, have shown great potential for removing these contaminants. Herein we reviewed nanomaterials reported for removing emerging contaminants by adsorption and/or photocatalysis, and their removal capacity, mechanism, and influencing factors are discussed. Meanwhile, a large-scale bibliometric analysis is conducted on the trends of the emerging contaminants, nanoadsorbents, nanophotocatalysts, and related research topics from the literature during 1998-2017.