Enhanced delivery of lipophilic bioactives using emulsions: a review of major factors affecting vitamin, nutraceutical, and lipid bioaccessibility

Beta-carotene-loaded Oleogels: Morphological analysis, cytotoxicity assessment, in vitro digestion and intestinal permeability

Composition and structure of oleogels significantly influence their digestive behaviour, impacting triacylglycerol breakdown and the bioavailability of incorporated compounds. Texture profile analysis showed that sterol-based oleogels (STOs) exhibited 20 times higher hardness than beeswax-based oleogels (BWOs), which showed stronger cohesion due to elasticity sustained by adhesive forces. Tribological assessments revealed similar initial coefficients of friction (COF) for both oleogels. However, fluctuations were observed in BWOs and a gradual decrease in STOs over time, enhancing lubrication, while BWOs recorded higher adhesion. These findings provide insights into their distinct digestive behaviour, with both oleogels undergoing structural disintegration and STOs displaying a higher lipolysis degree. Non-cytotoxicity was confirmed under Caco-2 cells. β-carotene bioaccessibility was influenced by the oleogels' structural modification and values of 4.0 ± 0.7 % for STOs and 2.6 ± 1.1 % for BWOs were recorded. Results highlight the need to optimize formulations to improve bioactive's bioavailability, emphasizing the role of structured gels in modulating digestion dynamics.

Rapeseed oleosomes facilitate intestinal lymphatic delivery and oral bioavailability of cannabidiol

Due to high lipophilicity and extensive first-pass metabolic loss, cannabidiol (CBD) has low oral bioavailability. Co-administration of CBD and long-chain lipids facilitates the intestinal lymphatic delivery, resulting in higher systemic bioavailability, as well as high levels of the drug within the intestinal lymphatic system. However, despite previous attempts with various lipid-based formulations, the oral bioavailability of CBD is still limited. In this work, we have developed a novel formulation of CBD based on natural rapeseed oleosomes. In vivo studies in rats demonstrated that oral administration of CBD-loaded rapeseed oleosomes leads to substantially higher oral bioavailability and intestinal lymphatic targeting of CBD in comparison with rapeseed oil or artificial emulsion made of rapeseed oil and lecithin. In vitro mechanistic assessments, including in vitro lipolysis and peroxide value determination suggest that the lower oxidative state of the oil in oleosomes in comparison to crude oil or artificial emulsion is likely to be the main factor responsible for the superior performance of the CBD-loaded rapeseed oleosomes in vivo. Although further investigation will be needed, the data suggest that natural seeds-derived oleosomes can be used as a promising lipid-based drug delivery platform promoting the bioavailability and lymphatic delivery of lipophilic drugs.

Nanocellulose-based Pickering emulsion of sesamolin manifested increased anticancer activity and necrosis in human colon cancer (HCT116) cells

Sesamolin possesses limited aqueous solubility, a drawback for biological activity study in cancer cell models. This study aimed to enhance sesamolin's ability to fight cancer, as it is a bioactive compound with low water solubility found in sesame. We developed different Pickering emulsion delivery systems and tested their anticancer effects on various cancer cell types. Sesamolin was incorporated into either sesame or olive oil and subsequently formulated as oil in water (o/w) Pickering emulsions stabilized by the carboxylated cellulose nanocrystal (cCNC). The anticancer activity was determined based on cell viability and the induction of cell death mechanisms. The results demonstrated a synergistic effect of the components in the emulsion, including sesamolin, sesame oil, and olive oil, and a decrease in HCT116 viability in a concentration-dependent manner and selectively on cancer cells compared to non-cancerous Vero cells. The primary mode of cell death was predominantly ROS-induced necrosis, with no change in caspase 3/7 activity, indicating the absence of apoptosis. This study first presents the necrotic cell death mechanism induced by sesamolin. The findings reveal that the cCNC emulsion delivery system is safe and appropriate for transporting lipophilic chemicals and can overcome solubility limitations.

The Effect of Multilayer Nanoemulsion on the In Vitro Digestion and Antioxidant Activity of β-Carotene

The objectives of this study were to design multilayer oil-in-water nanoemulsions using a layer-by-layer technique to enhance the stability of β-carotene and evaluate its effect on in vitro release and antioxidant activity. To prepare β-carotene-loaded multilayer nanoemulsions (NEs), a primary NE (PRI-NE) using Tween 20 was coated with chitosan (CS) for the secondary NE (SEC-CS), and with dextran sulfate (DS) and sodium alginate (SA) for the two types of tertiary NEs (TER-DS, TER-SA). The multilayer NEs ranged in particle size from 92 to 110 nm and exhibited high entrapment efficiency (92-99%). After incubation in a simulated gastrointestinal tract model, the release rate of free fatty acids decreased slightly after coating with CS, DS, and SA. The bioaccessibility of β-carotene was 7.02% for the PRI-NE, 7.96% for the SEC-CS, 10.88% for the TER-DS, and 10.25% for the TER-SA. The 2,2-diphenyl-1-picrylhydrazyl radical scavenging abilities increased by 1.2 times for the multilayer NEs compared to the PRI-NE. In addition, the cellular antioxidant abilities improved by 1.8 times for the TER-DS (87.24%) compared to the PRI-NE (48.36%). Therefore, multilayer nanoemulsions are potentially valuable techniques to improve the stability, in vitro digestion, and antioxidant activity of β-carotene.

Enhanced bioaccessibility of interfacial delivered oleanolic acid through self-constructed Pickering emulsion: Effects of oil types

Pentacyclic triterpenes have attracted much attention because of their many bioactivities, but their bioaccessibility is low. Oleanolic acid (OA) was used in this study as a typical edible pentacyclic triterpene. In this work, we proposed an OA interfacial delivery model based on W/O Pickering emulsion, and investigated the effects of different oil types on the emulsion properties and OA bioaccessibility of the OA W/O Pickering emulsion interfacial delivery system (EIDS). Medium chain triglyceride (MCT), long chain triglycerides (LCT) and MCT/LCT (1:1, w/w) were selected as carrier oils for the preparation of emulsions, respectively. The results showed that the emulsions formed from LCT had smaller particle sizes, which increased the deformation resistance of the emulsions and exhibited good stability during the simulated in vitro digestion. The extent of free fatty acid (FFA) release during oil digestion was MCT (103.32 ± 3.74 %) > M/L (97.89 ± 2.89 %) > LCT (71.41 ± 6.64 %). Of interest, the bioaccessibility of OA was influenced by the carrier oil: LCT (59.34 ± 2.55 %) > M/L (47.35 ± 6.25 %) > MCT (13.11 ± 1.40 %) ＞ PBS (7.11 ± 1.74 %), and such a difference was mainly attributed to the greater solubilisation of OA in mixed micelles consisting of long-chain fatty acids. In summary, the size of hydrophobic domains in the mixed micelles produced a greater effect than the effect of FFA release on OA bioaccessibility. This study provides a theoretical basis for the interfacial delivery of OA and the enhancement of OA bioaccessibility based on W/O Pickering emulsions with different oil types.

Hyaluronic acid-poly(glyceryl)10-stearate nanoemulsion for co-delivery of fish oil and resveratrol: Enhancing bioaccessibility and antioxidant potency

Hyaluronic acid (HA), an endogenous polysaccharide comprising alternating D-glucuronic acid and N-acetylglucosamine units, is renowned for its high hydrophilicity, biocompatibility, and biodegradability. These attributes have rendered HA invaluable across medical and drug delivery fields. HA can be altered through physical, chemical, or enzymatic methods to improve the properties of the modified substances. In this work, we synthesized a derivative via the esterification of HA with poly(glyceryl)10-stearate (PG10-C18), designated as HA-PG10-C18. This novel derivative was employed to fabricate a nano co-delivery system (HA-PG10-C18@Res-NE) for fish oil and resveratrol (Res), aiming to enhance their stability and bioaccessibility. An exhaustive investigation of HA-PG10-C18@Res-NE revealed that the HA-modified system displayed superior physicochemical stability, notably in withstanding oxidation and neutralizing free radicals. Moreover, in vitro simulated digestion underscored the system's enhanced bioaccessibility of Res and more efficient release of free fatty acids. These outcomes underscore the strategic advantage of HA in modifying PG10-C18 for nanoemulsion formulation. Consequently, HA-PG10-C18 stands as a promising emulsifier for encapsulating lipophilic bioactives in functional foods, nutraceuticals, and pharmaceuticals.

Nutraceutical delivery systems to improve the bioaccessibility and bioavailability of lycopene: A review

Lycopene is a promising biological functional component with various biological activities and excellent pharmacological activities. However, its low water solubility and stability lead to low oral bioavailability, which limits its edible and medicinal research. Then, it is necessary to explore effective methods to protect lycopene from destruction and further exploit its potential benefits. The absorption of lycopene in vivo is affected by solubility, stability, isomer type, emulsifying ability, difficulty in forming micelles in vivo, and interaction with food components. Emulsions, pickering emulsions, micelles, liposomes, bigels, beasds, solid dispersions, microcapsules, nanoparticles, electrospinning and other drug delivery systems can be used as good strategies to improve the stability and bioavailability of lycopene. In this paper, the absorption process of lycopene in vivo and the factors affecting its bioavailability were discussed, and the preparation strategies for improving the stability, bioavailability, and health benefits of lycopene were reviewed, to provide some clues and references for the full utilization of lycopene in the field of health. However, there are still various unresolved mysteries regarding the metabolism of lycopene. The safety and in vivo studies of various preparations should be further explored, and the above technologies also face the challenge of industrial production.

Stability and gastrointestinal behavior of curcumin-loaded emulsion stabilized by multi-conformation soy proteins: Influence of oil volume fraction

The aim of this work was to assess the potential of nanoemulsions stabilized by mixed soy protein with multi-conformation as curcumin carrier, and the influence of oil volume fraction on stability and gastrointestinal behavior of curcumin-loaded emulsion was investigated. Loading efficiency showed a slight increase with higher oil content, though the difference was not statistically significant. With the increase of oil, the viscosity (Pa‧s), thixotropy (area of hysteresis loop) and particle size of the emulsion increased, which facilitated the physical and chemical stability of curcumin-loaded emulsion. However, the free fatty acid release rate and bioaccessibility of curcumin was negatively correlated with the oil volume fraction and the particle size of emulsion after gastric digestion. Notably, the digestion in stomach did not affect the structure of interfacial protein, demonstrating that protein-based nanoemulsions exhibited resistance to gastric digestion. This study provides theoretical guidance for the application of protein-based emulsion in curcumin delivery.

Novel animal product substitutes: A new category of plant-based alternatives to meat, seafood, egg, and dairy products

Many consumers are adopting plant-centric diets to address the adverse effects of livestock production on the environment, health, and animal welfare. Processed plant-based foods, including animal product analogs (such as meat, seafood, egg, or dairy analogs) and traditional animal product substitutes (such as tofu, seitan, or tempeh), may not be desirable to a broad spectrum of consumers. This article introduces a new category of plant-based foods specifically designed to overcome the limitations of current animal product analogs and substitutes: novel animal product substitutes (NAPS). NAPS are designed to contain high levels of nutrients to be encouraged (such as proteins, omega-3 fatty acids, dietary fibers, vitamins, and minerals) and low levels of nutrients to be discouraged (such as salt, sugar, and saturated fat). Moreover, they may be designed to have a wide range of appearances, textures, mouthfeels, and flavors. For instance, they could be red, orange, green, yellow, blue, or beige; they could be spheres, ovals, cubes, or pyramids; they could be hard/soft or brittle/pliable; and they could be lemon, thyme, curry, or chili flavored. Consequently, there is great flexibility in creating NAPS that could be eaten in situations where animal products are normally consumed, for example, with pasta, rice, potatoes, bread, soups, or salads. This article reviews the science behind the formulation of NAPS, highlights factors impacting their appearance, texture, flavor, and nutritional profile, and discusses methods that can be used to formulate, produce, and characterize them. Finally, it stresses the need for further studies on this new category of foods, especially on their sensory and consumer aspects.

Over 100 years of vitamin E: An overview from synthesis and formulation to application in animal nutrition

The groundbreaking discovery of vitamin E by Evans and Bishop in 1922 was an important milestone in vitamin research, inspiring further investigation into its crucial role in both human and animal nutrition. Supplementing vitamin E has been proved to enhance multiple key physiological systems such as the reproductive, circulatory, nervous and muscular systems. As the main antioxidant in the blood and on a cellular level, vitamin E maintains the integrity of both cellular and vascular membranes and thus modulates the immune system. This overview showcases important and innovative routes for synthesizing vitamin E on a commercial scale, provides cutting-edge insights into formulation concepts for successful product form development and emphasizes the importance and future of vitamin E in healthy and sustainable animal nutrition.

Natural product nobiletin-loaded Pickering emulsion stabilized by bovine serum albumin/carboxymethyl inulin complexes: preparation and digestive characteristics

To expand the application of nobiletin (NOB) in semi-solid functional foods, bovine serum albumin (BSA)/carboxymethyl inulin (CMI) complexes-stabilized Pickering emulsion (BCPE) (φoil = 60%, v/v) was fabricated, and the swallowing index and bioavailability of the NOB-loaded Pickering emulsion was evaluated. Confocal laser scanning microscope (CLSM) and cryo-scanning electron microscopy (cryo-SEM) images revealed that BSA/CMI complexes attached to the oil-water interface. NOB-loaded BCPE exhibited a viscoelastic and shear-thinning behavior. Fork drip test results suggested that the textural value of unloaded and NOB-loaded emulsions was International Dysphagia Diet Standardisation Initiative Level 4, which could be swallowed directly without chewing. The in vitro lipolysis model suggested that NOB had a faster digestive profile and a higher bioaccessibility in the BCPE than in the oil suspension. The in vivo rat model revealed that the oral bioavailability of NOB was increased by 2.07 folds in BCPE compared to its bioavailability in unformulated oil. Moreover, BCPE led to a higher plasma concentration of the major demethylated metabolite of NOB (4'-demethylnobiletin) than the unformulated oil. Accordingly, BCPE enhanced the oral bioavailability of NOB by improving bioaccessibility, absorption, and biotransformation.

Fabrication and characterization of chitosan-pectin emulsion-filled hydrogel prepared by cold-set gelation to improve bioaccessibility of lipophilic bioactive compounds

Chitosan-pectin emulsion-filled hydrogel (EFH) was developed to enhance the bioaccessibility of lipophilic bioactive compounds through intestinal delivery. The EFH, incorporating a sodium caseinate-stabilized emulsion, was prepared using cold-set gelation under acidic conditions without crosslinking agents. Increasing the pectin concentration (0.75-1.50%, w/v) improved the mechanical strength and compactness of the EFH. The pH-responsive EFH retained the emulsion at pH 2.0 and released it at pH 7.4. In vitro digestion demonstrated that the EFH remained intact during oral and gastric stages, while the emulsion alone became destabilized. During intestinal digestion, the release of free fatty acids from the EFH decreased from 58.67% to 43.76% as the pectin concentration increased from 0.75% to 1.50%. EFH with 0.75% and 1.00% pectin significantly improved curcumin bioaccessibility compared to the emulsion alone. These findings demonstrate the potential of chitosan-pectin EFH as a novel carrier system for enhancing the bioaccessibility of lipophilic bioactive compounds.

High internal phase emulsions stabilized by whey protein covalently modified with carboxymethyl cellulose: Enhanced environmental stability, storage stability and bioaccessibility

In this work, the effects of whey protein-carboxymethyl cellulose (WP-CMC) conjugates on the environmental stability, in vitro digestion stability, storage stability and bioaccessibility of high internal phase emulsions (HIPEs) were investigated. Compared to the HIPEs stabilized by the mixture of WP and CMC, the HIPEs stabilized by WP-CMC were less sensitive to environmental changes by particle size and zeta-potential, and showed better stability and bioavailability of pine nut oil as well as β-carotene during simulated gastrointestinal digestion. In addition, the inclusion function and pine nut oil oxidative stability of the HIPEs stabilized by WP-CMC were better during 16 days of storage than those of the pine nut oil and HIPEs stabilized by the mixture of WP and CMC, and also expressed higher storage stability of β-carotene. These results suggested that the conjugate-stabilized emulsions developed in this study have potential applications as protectors and carriers of liposoluble active ingredients.

In Vitro and In Vivo Performance of Pickering Emulsion-Based Powders of Omega-3 Polyunsaturated Fatty Acids

Omega-3 polyunsaturated fatty acids (n-3 PUFA) are essential nutrients for human health and have been linked to a variety of health benefits, including reducing the risk of cardiovascular diseases. In this paper, a spray-dried powder formulation based on Pickering emulsions stabilized with cellulose nanocrystals (CNC) and hydroxypropyl methylcellulose (HPMC) has been developed. The formulation was compared in vitro and in vivo to reference emulsions (conventional Self-Emulsifying Drug Delivery System, SEDDS) to formulate n-3 PUFA pharmaceutical products, specifically in free fatty acid form. The results of in vivo studies performed in fasted dogs showed that Pickering emulsions reconstituted from powders are freely available (fast absorption) with a similar level of bioavailability as reference emulsions. In the studies performed with dogs in the fed state, the higher bioavailability combined with slower absorption observed for the Pickering emulsion, compared to the reference, was proposed to be the result of the protection of the n-3 PUFAs (in free fatty acid form) against oxidation in the stomach by the solid particles stabilizing the emulsion. This observation was supported by promising results from short-term studies of chemical stability of powders with n-3 PUFA loads as high as 0.8 g oil/g powder that easily regain the original emulsion drop sizes upon reconstitution. The present work has shown that Pickering emulsions may offer a promising strategy for improving the bioavailability and stability as well as providing an opportunity to produce environmentally friendly (surfactant free) and patient-acceptable solid oral dosage forms of n-3 PUFA in the free fatty acid form.

Study on the Effect of Polymer-Modified Magnetic Nanoparticles on Viscosity Reduction of Heavy Oil Emulsion

To overcome the problems of large dosage, fast sedimentation, and the unsatisfactory emulsification effect of traditional magnetic nanoparticles, polymer-modified magnetic nanoparticle Co3O4@HPAM was synthesized as an emulsifier for heavy oil O/W emulsion by modifying the surface of Co3O4. The composition of Co3O4@HPAM was characterized by Fourier transform infrared spectroscopy, X-ray diffraction analysis, thermogravimetric analysis, and scanning electron microscopy. Then, the effects of the mass fraction of magnetic nanoparticles before and after modification on the stability and rheology of the emulsion were compared and analyzed. The experiments show that the degree of reduction of the water-separation rate under the action of Co3O4@HPAM was 13 times higher than that under the action of Co3O4 at the same mass fraction. By using Co3O4@HPAM, the water separation of the emulsion was only 6.74% at 4 h, while the viscosity reduction was greater than 97% at a mass fraction of 0.04%. Finally, combined with the test results of zeta potential, interfacial tension, contact angle, and oil droplet distribution, the effect mechanism of Co3O4@HPAM on the viscosity reduction of heavy oil emulsification was investigated. It is found that the polymer-modified magnetic nanoparticles have stronger negative electricity, a larger contact angle, and smaller interfacial tension, while the oil droplets under their action have a smaller radius and a more homogeneous distribution. The research in this paper provides a theoretical basis for the application of magnetic nanoparticles in heavy oil emulsification and viscosity reduction technology.

An Updated Review on Nanoemulsion: Factory for Food and Drug Delivery

BACKGROUND

A nanoemulsion is a colloidal system of small droplets dispersed in another liquid. It has attracted considerable attention due to its unique properties and various applications. Throughout this review, we provide an overview of nanoemulsions and how they can be applied to various applications such as drug delivery, food applications, and pesticide formulations.

OBJECTIVE

This updated review aims to comprehensively overview nanoemulsions and their applications as a versatile platform for drug delivery, food applications, and pesticide formulations.

METHODS

Research relevant scientific literature across various databases, including PubMed, Scopus, and Web of Science. Suitable keywords for this purpose include "nanoemulsion," "drug delivery," and "food applications." Ensure the search criteria include recent publications to ensure current knowledge is included.

RESULTS

Several benefits have been demonstrated in the delivery of drugs using nanoemulsions, including improved solubility, increased bioavailability, and controlled delivery. Nanoemulsions have improved some bioactive compounds in food applications, including vitamins and antioxidants. At the same time, pesticide formulations based on nanoemulsions have also improved solubility, shelf life, and effectiveness.

CONCLUSION

The versatility of nanoemulsions makes them ideal for drug delivery, food, and pesticide formulation applications. These products are highly soluble, bioavailable, and targeted, providing significant advantages. More research and development are required to implement nanoemulsion-based products on a commercial scale.

Influence of the Oil Structuring System on Lipid Hydrolysis and Bioaccessibility of Healthy Fatty Acids and Curcumin

Oleogels (OG) and gelled emulsions (GE) were elaborated with a mixture of olive and chia oils (80:20 ratio) without and with the incorporation of the health-related compound curcumin. These were studied to evaluate the influence of the oil structuring system on the lipid hydrolysis and bioaccessibility of three healthy fatty acids (FA) (palmitic, oleic, and α-linolenic acids) and of curcumin, compared to the oil mixture (bulk oil, BO). The oil structuring system influenced the firmness and texture, and the presence of curcumin significantly altered the color parameters. GE showed higher lipid digestibility, with a greater proportion of absorbable fraction (higher content of free FA and monoacylglycerides) than OG, which behaved similarly to BO. The presence of curcumin affected the degree of lipolysis, reducing lipid digestibility in OG and increasing it in GE. As for FA bioaccessibility, although GE presented higher percentages overall, curcumin significantly increased and decreased FA bioaccessibility in OG and GE, respectively. The oil structuring system also influenced the bioaccessibility of curcumin, which was higher in GE. Therefore, when selecting an oil structuring system, their physicochemical properties, the degree of lipid hydrolysis, and the bioaccessibility of both curcumin and the FA studied should all be considered.

Retrograded octenylsuccinylated maize starch-based emulgels for a promising oral delivery system of curcumin

Emulgels are a type of soft solid delivery system that exploit the merits of both emulsions and gels, namely, bioactive encapsulability and structural stability, respectively. We utilized retrograded/octenylsuccinylated maize starch (ROMS) to fabricate the curcumin-loaded emulgel. Emulgels (oil volume fraction, 0.20) prepared with 1-4 % w/w ROMS exhibited fluid-like behaviors while emulgels with 5-8 % w/w ROMS exhibited a gel-like consistency. Compared to a fluidic emulsion stabilized with 3 % w/w octenylsuccinylated maize starch, the emulgels showed more sustained lipolysis and controlled curcumin release patterns. These results were attributed to rigid ROMS structures at the outer layer of oil droplets, hindering the lipase approach onto the oil/water interface and curcumin diffusion from the interface. Additionally, the bioaccessibility of curcumin in ROMS-stabilized emulgels was enhanced >9.6-fold compared to that of a curcumin solution. Furthermore, emulgels prepared with 8 % w/w ROMS exhibited a high yield stress (376.4 Pa) and maintained appearance and droplet size for 60 days of storage at 4 °C. Consequently, this emulgel has potential as a lipophilic bioactive-containing soft gel with sustained digestion and controlled release properties. Our findings may provide insights into rational delivery system designs.

Application of small angle X-ray scattering in exploring the effect of edible oils with different unsaturation FAs on bioaccessibility of stigmasterol oleate

BACKGROUND

Phytosterol can improve its lipid solubility, lipophilic/hydrophilic balance and bioaccessibility by esterification with fatty acids, which increases its practical application range in the food industry. In the present study, small angle X-ray scattering combined with the pH-stat in vitro digestion model was applied to continuously monitor the molecular structure evolution of mixed micelles during digestion and investigate the effect of three edible oils (olive oil with 72.41 ± 0.57% oleic, sunflower seed oil with 63.45 ± 0.78% linoleic, refined linseed oil with 51.74 ± 0.34% linolenic) on bioaccessibility of stigmasterol oleate in vitro.

RESULTS

The release degree and rate of fatty acids in the three edible oil systems (kOO+ST-OA  = 0.0501, kSO+ ST-OA  = 0.0357, kLO+ST-OA  = 0.0323) was compared. The three different edible oils had similar impact on the formation of dietary mixed micelles during the simulatedin vitro digestion of stigmasterol oleate, although there were significant differences in molecular morphology and composition of mixed micelles. The results showed that the vesicles formed by linoleic oil (SO system) or linolenic oil (LO system) were easy to dissociate. The largest average number and diameter of vesicles (5.55 × 1016  cm-3 and 2230.75 Å), the most stable vesicle structure and the fastest fatty acid release rate were observed in the OO system.

CONCLUSION

Compared to linoleic (SO system) or linolenic (LO system), the oleic (OO system) could facilitate the transformation of micelles to vesicles and maintain the stability of its membrane, significantly promotin the dissolution of stigmasterol and improving bioaccessibility. © 2023 Society of Chemical Industry.

Solid-liquid equilibria of triacylglycerols and vitamin E mixtures

Oils and fats are important ingredients for food and pharmaceutical industries. Their main compounds, such as triacylglycerols (TAG), are responsible for determining their physical properties during food storage and consumption. Lipid-rich foods are also sources of minority compounds, which is the case of vitamin E, mainly represented by (±)-α-tocopherol. These compounds can interact with the main lipid molecules in food formulation leading to modification on lipids' physicochemical properties during processes, storage, as well as during digestion, possibly altering their nutritional functionalities, which is the case of vitamin E antioxidant abilities, but also their solubility in the systems. In this case, the study of the phase-behavior between (±)-α-tocopherol and lipid compounds can elucidate these physicochemical changings. Therefore, this work was aimed at determining the solid-liquid equilibrium (SLE) of binary mixtures of TAG (tripalmitin, triolein and tristearin) and (±)-α-tocopherol including the complete description of their phase diagrams. Melting data were evaluated by Differential Scanning Calorimetry, Microscopy, X-Ray Diffraction, and thermodynamic modeling by using Margules, UNIFAC, and COSMO-SAC models. Experimental results showed that systems presented a monotectic-like behavior, with a significant decreasing in TAG melting temperature by the addition of (±)-α-tocopherol. This high affinity and attractive strengths between these molecules were also observed by thermodynamic modeling, whose absolute deviations were below 2 %. Micrographs and X-ray diffraction evidenced the possible formation of solid solutions. Both behaviors are interesting by avoiding phase separation on food in solid and liquid phases, possibly improving the antioxidant role the (±)-α-tocopherol in lipid-base systems.

Contribution of Different Food Types to Vitamin A Intake in the Chinese Diet

Vitamin A is a fat-soluble micronutrient that is essential for human health. In this study, the daily vitamin A intake of Chinese residents was evaluated by investigating the vitamin A content of various foods. The results show that the dietary intake of vitamin A in common foods was 460.56 ugRAE/day, which is significantly lower than the recommended dietary reference intake of vitamin A (800 ugRAE/day for adult men and 700 ugRAE/day for adult women). Vegetables contributed the most to daily vitamin A dietary intake, accounting for 54.94% of vitamin A intake (253.03 ugRAE/day), followed by eggs, milk, aquatic products, meat, fruit, legumes, coarse cereals, and potatoes. Therefore, an increase in the vitamin A content of vegetables and the fortification of vegetable oils with vitamin A are effective ways to increase vitamin A intake to meet the recommended dietary guidelines in China. The assessment results support the design of fortified foods.

Ultraprocessed plant-based foods: Designing the next generation of healthy and sustainable alternatives to animal-based foods

Numerous examples of next-generation plant-based foods, such as meat, seafood, egg, and dairy analogs, are commercially available. These products are usually designed to have physicochemical properties, sensory attributes, and functional behaviors that match those of the animal-sourced products they are designed to replace. However, there has been concern about the potential negative impacts of these foods on human nutrition and health. In particular, many of these products have been criticized for being ultraprocessed foods that contain numerous ingredients and are manufactured using harsh processing operations. In this article, the concept of ultraprocessed foods is introduced and its relevance to describe the properties of next-generation plant-based foods is discussed. Most commercial plant-based meat, seafood, egg, and dairy analogs currently available do fall into this category, and so can be classified as ultraprocessed plant-based (UPB) foods. The nutrient content, digestibility, bioavailability, and gut microbiome effects of UPB foods are compared to those of animal-based foods, and the potential consequences of any differences on human health are discussed. Some commercial UPB foods would not be considered healthy based on their nutrient profiles, especially those plant-based cheeses that contain low levels of protein and high levels of fat, starch, and salt. However, it is argued that UPB foods can be designed to have good nutritional profiles and beneficial health effects. Finally, areas where further research are still needed to create a more healthy and sustainable food supply are discussed.

Multicompartment colloid systems with lipid and polymer membranes for biomedical applications

Multicompartment structures have the potential for biomedical applications because they can act as multifunctional systems and provide simultaneous delivery of drugs and diagnostics agents of different types. Moreover, some of them mimic biological cells to some extent with organelles as separate sub-compartments. This article analyses multicompartment colloidal structures with smaller sub-units covered with lipid or polymer membranes that provide additional protection for the encapsulated substances. Vesosomes with small vesicles encapsulated in the inner pools of larger liposomes are the most studied systems to date. Dendrimer molecules are enclosed by a lipid bilayer shell in dendrosomes. Capsosomes, polymersomes-in-polymer capsules, and cubosomes-in-polymer capsules are composed of sub-compartments encapsulated within closed multilayer polymer membranes. Janus or Cerberus emulsions contain droplets composed of two or three phases: immiscible oils in O/W emulsions and aqueous polymer or salt solutions that are separated into two or three phases and form connected droplets in W/O emulsions. In more cases, the external surface of engulfed droplets in Janus or Cerberus emulsions is covered with a lipid or polymer monolayer. eLiposomes with emulsion droplets encapsulated into a bilayer shell have been given little attention so far, but they have very great prospects. In addition to nanoemulsion droplets, solid lipid nanoparticles, nanostructured lipid carriers and inorganic nanoparticles can be loaded into eLiposomes. Molecular engineering of the external membrane allows the creation of ligand-targeted and stimuli-responsive multifunctional systems. As a result, the efficacy of drug delivery can be significantly enhanced.

Bioaccessibility and bioactive potential of different phytochemical classes from nutraceuticals and functional foods

Nutraceuticals and functional foods are composed of especially complex matrices, with polyphenols, carotenoids, minerals, and vitamins, among others, being the main classes of phytochemicals involved in their bioactivities. Despite their wide use, further investigations are needed to certify the proper release of these phytochemicals into the gastrointestinal medium, where the bioaccessibility assay is one of the most frequently used method. The aim of this review was to gather and describe different methods that can be used to assess the bioaccessibility of nutraceuticals and functional foods, along with the most important factors that can impact this process. The link between simulated digestion testing of phytochemicals and their in vitro bioactivity is also discussed, with a special focus on the potential of developing nutraceuticals and functional foods from simple plant materials. The bioactive potential of certain classes of phytochemicals from nutraceuticals and functional foods is susceptible to different variations during the bioaccessibility assessment, with different factors contributing to this variability, namely the chemical composition and the nature of the matrix. Regardless of the high number of studies, the current methodology fails to assume correlations between bioaccessibility and bioactivity, and the findings of this review indicate a necessity for updated and standardized protocols.

Polysaccharide-addition order regulates sonicated egg white peptide stabilized nanoemulsions and β-carotene digestion in vitro

In this paper, the effects of the polysaccharide-addition order (before and after homogenisation) on the stability of nanoemulsion stabilised by sonicated egg white peptides and the in vitro digestive behaviour of loaded β-carotene were investigated. The pyrene fluorescence results showed that the concentration of micelles formed by flaxseed gum (FG) in complex with peptides was significantly higher than that of peach gum (PG). The order of polysaccharide-addition affected the emulsion properties and stability; adding polysaccharides before homogenisation led to protein bridging flocculation, low polysaccharide coverage and a higher interfacial adsorbed protein content of the emulsion. PG enhanced potential spatial resistance and electrostatic repulsion, effectively prevented emulsion flocculation and improved electrostatic stability. After homogenisation, FG was added to emulsions to improve environmental stability, including ionic, temperature and storage stability. Due to the viscosity of polysaccharides and the formed polysaccharide-protein-lipid aggregates, the increasing degree of bridging flocculation promoted the prominent of apparent viscosity, and the G' and G'' exhibited a frequency-dependent increase. The polysaccharide type and mode changed the surface loading charge and droplet interface thickness, delayed the destruction of the droplet structure by protease, and slowed the release of β-carotene to form micelles. In this study, a stable emulsion system and an efficient emulsion transport system for bioactive substances were obtained by regulating polysaccharides adding order, which is significant for constructing an efficient food emulsion delivery system.

Bioaccessibility of Tocols in Commercial Maize Hybrids Determined by an In Vitro Digestion Model for Poultry

Despite the high proportion of maize grain in animal diets, the contribution made by maize phytochemicals is neglected. Tocols and their contribution to the vitamin E content of animal diets are one example, exacerbated by sparse information on the tocol bioaccessibility of commercial hybrids. In this study, the contents of individual and total tocols and their bioaccessibility were determined in the grain samples of 103 commercial hybrids using a standardized INFOGEST digestion procedure. In the studied hybrids, total tocol content ranged from 19.24 to 54.44 µg/g of dry matter. The contents of micellar α-, γ-, δ-tocopherols, γ-tocotrienol, and total tocols correlated positively with the corresponding contents in the grain samples of the studied hybrids. In contrast, a negative correlation was observed between the bioaccessibility of γ- tocopherol, α- and γ-tocotrienol, and total tocols, along with the corresponding contents in the grain of studied hybrids. The highest bioaccessibility was exhibited by γ-tocotrienol (532.77 g/kg), followed by δ-tocopherol (529.88 g/kg), γ-tocopherol (461.76 g/kg), α-tocopherol (406.49 g/kg), and α-tocotrienol (359.07 g/kg). Overall, there are significant differences in the content and bioaccessibility of total and individual tocols among commercial maize hybrids, allowing the selection of hybrids for animal production based not only on crude chemical composition but also on the content of phytochemicals.

Use of excipient emulsions for improving the bioaccessibility of antioxidants in tomato sauce

In this study, tomato sauces were prepared by adding different levels of emulsified oil (0, 5, 10, or 20 wt%) to tomato pomace. The effects of adding these excipient emulsions on the concentration, bioaccessibility, and bioactivity of the carotenoids and phenolics in the tomato sauces were then determined. The carotenoid and phenolic profiles were analyzed by HPLC and LC-MS/MS, respectively. The bioaccessibility values of the lycopene, lutein, and β-carotene were around 36-82%, 73-112%, and 67-94% for tomato sauces with excipient emulsions, respectively. In contrast, they were considerably lower for tomato sauces without excipient emulsions, being around 24-31%, 69-71%, and 45-62%, respectively. The TPC and TAC values of the tomato sauces with the excipient emulsions were significantly higher than those without. Considerably higher concentrations of carotenoids and phenolic compounds were detected in the tomato sauce samples containing the excipient emulsions. These results suggest that the presence of the oil droplets increased the extractability, stability, and bioaccessibility of the nutraceuticals in the tomato sauce.

Emulsifying properties, in vitro digestive characteristics, and β-carotene bioaccessibility of mandarin peel pectin emulsions prepared with different carrier oil phases

Mandarin peel pectin (MPP) emulsions were prepared with different oil phase loadings with or without β-carotene, and their emulsifying characteristics, digestive properties and β-carotene bioaccessibility were investigated. Results revealed that all MPP emulsions exhibited good loading efficiency for β-carotene, while their apparent viscosity and interfacial pressure (π) of MPP emulsions increased significantly after the addition of β-carotene. Emulsification of MPP emulsions as well as digestibility were significantly dependent on the kind of oil. MPP emulsions prepared with long-chain triglycerides (LCT) oil (soybean, corn, and olive oil) exhibited higher volume average particle size (D_4,3), apparent viscosity, π values, and bioaccessibility of carotene compared to those prepared with medium-chain oils (MCT). MPP emulsions with LCT rich in monosaturated fatty acids (olive oil) had the highest β-carotene encapsulation efficiency, bioaccessibility, etc. than from other oils. This study provides a theoretical basis for the efficient encapsulation and high bioaccessibility of carotenoids with pectin emulsions.

In vitro digestion models for the design of safe and nutritious foods

Responsible development of future foods requires in depth understanding of food digestion in the human body based on robust research models, ranging from in vitro models to randomized controlled human trials. This chapter overviews fundamental aspects of food digestion, namely bioaccessibility and bioavailability, and models mirroring gastric, intestinal, and colonic conditions. Second, the chapter demonstrates the potential of in vitro digestion models to help screen adverse effects of food additives, such as Titanium dioxide or carrageenan, or underpin the determinants of macro- and micronutrient digestion in different strata of the population, for example digestion of emulsions. Such efforts support rationalized design of functional foods, such as infant formulae, cheese, cereals and biscuits which are validated in vivo or in randomized controlled trials.

Effect of Curcumin Consumption on Inflammation and Oxidative Stress in Patients on Hemodialysis: A Literature Review

Advanced chronic kidney disease (CKD) stages lead to exacerbated inflammation and oxidative stress. Patients with CKD in stage 5 need renal hemodialysis (HD) to remove toxins and waste products. However, this renal replacement therapy is inefficient in controlling inflammation. Regular curcumin consumption has been shown to reduce inflammation and oxidative stress in subjects with chronic pathologies, suggesting that the daily intake of curcumin may alleviate these conditions in HD patients. This review analyzes the available scientific evidence regarding the effect of curcumin intake on oxidative stress and inflammation in HD patients, focusing on the mechanisms and consequences of HD and curcumin consumption. The inclusion of curcumin as a dietary therapeutic supplement in HD patients has shown to control the inflammation status. However, the optimal dose and oral vehicle for curcumin administration are yet to be determined. It is important to consider studies on curcumin bioaccessibility to design effective oral administration vehicles. This information will contribute to the achievement of future nutritional interventions that validate the efficacy of curcumin supplementation as part of diet therapy in HD.

Pre-duodenal lipid digestion of emulsions: Relevance, colloidal aspects and mechanistic insight

The digestion of lipids in the human body has several health and nutritional implications. Lipid digestion is an interfacial phenomenon meaning that water-soluble lipases need to first adsorb to the oil-water interface before enzymatic conversions can start. The digestion of lipids mainly occurs on colloidal structures dispersed in water, such as oil-in-water (o/w) emulsions, which can be designed during food formulation/processing or structured during digestion. From a food design perspective, different in vitro studies have demonstrated that the kinetics of lipid digestion can be influenced by emulsion properties. However, most of these studies have been performed with pancreatic enzymes to simulate lipolysis in the small intestine. Only few studies have dealt with lipid digestion in the gastric phase and its subsequent impact on intestinal lipolysis. In this aspect, this review compiles information on the physiological aspects of gastric lipid digestion. In addition, it deals with colloidal and interfacial aspects starting from emulsion design factors and how they evolve during in vitro digestion. Finally, molecular mechanisms describing gastric lipolysis are discussed.

A comprehensive review of protein-based carriers with simple structures for the co-encapsulation of bioactive agents

The rational design and fabrication of edible codelivery carriers are important to develop functional foods fortified with a plurality of bioactive agents, which may produce synergistic effects in increasing bioactivity and functionality to target specific health benefits. Food proteins possess considerable functional attributes that make them suitable for the delivery of a single bioactive agent in a wide range of platforms. Among the different types of protein-based carriers, protein-ligand nanocomplexes, micro/nanoparticles, and oil-in-water (O/W) emulsions have increasingly attracted attention in the codelivery of multiple bioactive agents, due to the simple and convenient preparation procedure, high stability, matrix compatibility, and dosage flexibility. However, the successful codelivery of bioactive agents with diverse physicochemical properties by using these simple-structure carriers is a daunting task. In this review, some effective strategies such as combined functional properties of proteins, self-assembly, composite, layer-by-layer, and interfacial engineering are introduced to redesign the carrier structure and explore the encapsulation of multiple bioactive agents. It then highlights success stories and challenges in the co-encapsulation of multiple bioactive agents within protein-based carriers with a simple structure. The partition, protection, and release of bioactive agents in these protein-based codelivery carriers are considered and discussed. Finally, safety and application as well as challenges of co-encapsulated bioactive agents in the food industry are also discussed. This work provides a state-of-the-art overview of protein-based particles and O/W emulsions in co-encapsulating bioactive agents, which is essential for the design and development of novel functional foods containing multiple bioactive agents.

Effects of dietary fat type and emulsification on carotenoid absorption: a randomized crossover trial

BACKGROUND

Although emerging evidence has suggested that the type and emulsification of dietary fat may be important to carotenoids absorption, these effects have not yet been validated in a human trial.

OBJECTIVE

This study aimed to examine the effects of dietary fat type and emulsification on the bioaccessibility and bioavailability of carotenoids from a carotenoids-rich salad.

METHODS

An identical salad was used for the in vitro and the human trial. This was paired with 28 g of one of the following four different fats: i) non-emulsified olive oil; ii) emulsified olive oil; (iv) non-emulsified coconut oil; v) emulsified coconut oil. The bioaccessibility of total carotenoids (TC) was assessed by a simulated in vitro digestion model. Sixteen subjects consumed salad with four test fats in random order, and plasma triglyceride and carotenoid (lutein, zeaxanthin, α-carotene, β-carotene, and lycopene) concentrations were determined hourly for 10 hours following the consumption. The absorption of TC and individual carotenoids were evaluated by the positive incremental area under the curve (iAUC) of plasma carotenoid concentrations.

RESULTS

The bioaccessibility of TC was greater with olive oil (24.0%) than with coconut oil (14.9%), and with the oil being emulsified (23.5%) rather than non-emulsified (15.4%). Likewise, the positive iAUC_1-10h of TC, α-carotene and lycopene were 55.2%, 110.8% and 45.8%, respectively, higher with olive oil than with coconut oil. Emulsified fat induced 40.0% greater positive iAUC_1-10h of TC than non-emulsified fat.

CONCLUSIONS

The type and emulsification of dietary fat are both essential to the carotenoid absorption. Findings from this study may provide scientific support for designing excipient emulsions as potential dietary strategies to optimize the absorption of fat-soluble compounds.

CLINICAL TRIAL REGISTRY

The present trial was registered at clinicaltrials.gov (NCT04323826), link: https://clinicaltrials.gov/ct2/show/NCT04323826.

Enhancing in vivo retinol bioavailability by incorporating β-carotene from alga Dunaliella salina into nanoemulsions containing natural-based emulsifiers

The use of microalgae as a source of bioactive compounds has gained interest since they present advantages vs higher plants. Among them, Dunaliella salina is one of the best sources of natural β-carotene, which is the precursor of vitamin A. However, β-carotene shows reduced oral bioavailability due to its chemical degradation and poor absorption. The work aimed to evaluate the influence of the emulsifier and oil concentration on the digestive stability of Dunaliella Salina-based nanoemulsions and study their influence on the digestibility and the β-carotene bioaccessibility. In addition, the effect of the emulsifier nature on the absorption of β-carotene and its conversion to retinol in vivo was also investigated. Results showed that the coalescence observed in soybean lecithin nanoemulsion during the gastrointestinal digestion reduced the digestibility and β-carotene bioaccessibility. In contrast, whey protein nanoemulsion that showed aggregation in the gastric phase could be redispersed in the intestinal phase facilitating the digestibility and bioaccessibility of the compound. In vivo results confirmed that whey protein nanoemulsion increased the bioavailability of retinol to a higher extent (C_max 685 ng/mL) than soybean lecithin nanoemulsion (C_max 394 ng/mL), because of an enhanced β-carotene absorption.

Fortification by design: A rational approach to designing vitamin D delivery systems for foods and beverages

Over the past few decades, vitamin D deficiency has been recognized as a serious global public health challenge. The World Health Organization has recommended fortification of foods with vitamin D, but this is often challenging because of its low water solubility, poor chemical stability, and low bioavailability. Studies have shown that these challenges can be overcome by encapsulating vitamin D within well-designed delivery systems containing nanoscale or microscale particles. The characteristics of these particles, such as their composition, size, structure, interfacial properties, and charge, can be controlled to attain desired functionality for specific applications. Recently, there has been great interest in the design, production, and application of vitamin-D loaded delivery systems. Many of the delivery systems reported in the literature are unsuitable for widespread application due to the complexity and high costs of the processing operations required to fabricate them, or because they are incompatible with food matrices. In this article, the concept of "fortification by design" is introduced, which involves a systematic approach to the design, production, and testing of colloidal delivery systems for the encapsulation and fortification of oil-soluble vitamins, using vitamin D as a model. Initially, the challenges associated with the incorporation of vitamin D into foods and beverages are reviewed. The fortification by design concept is then described, which involves several steps: (i) selection of appropriate vitamin D form; (ii) selection of appropriate food matrix; (iii) identification of appropriate delivery system; (iv) identification of appropriate production method; (vii) establishment of appropriate testing procedures; and (viii) system optimization.

Research advances of in vivo biological fate of food bioactives delivered by colloidal systems

Food bioactives exhibit various health-promoting effects and are widely used in functional foods to maintain human health. After oral intake, bioactives undergo complex biological processes before reaching the target organs to exert their biological effects. However, several factors may reduce their bioavailability. Colloidal systems have attracted special attention due to their great potential to improve bioavailability and bioefficiency. Herein, we focus on the importance of in vivo studies of the biological fates of bioactives delivered by colloidal systems. Increasing evidence demonstrates that the construction, composition, and physicochemical properties of the delivery systems significantly influence the in vivo biological fates of bioactives. These results demonstrate the great potential to control the in vivo behavior of food bioactives by designing specific delivery systems. We also compare in vivo and in vitro models used for biological studies of the fate of food bioactives delivered by colloidal systems. Meanwhile, the significance of the gut microbiota, targeted delivery, and personalized nutrition should be carefully considered. This review provides new insight for further studies of food bioactives delivered by colloidal systems, as well as scientific guidance for the reasonable design of personalized nutrition.

Evaluating Cannabis sativa L.'s neuroprotection potential: From bench to bedside

BACKGROUND

Neurodegenerative diseases and dementia pose a global health challenge in an aging population, exemplified by the increasing incidence and prevalence of its most common form, Alzheimer's disease. Although several approved treatments exist for Alzheimer's disease, they only afford transient symptomatic improvements and are not considered disease-modifying. The psychoactive properties of Cannabis sativa L. have been recognized for thousands of years and now with burgeoning access to medicinal formulations globally, research has turned to re-evaluate cannabis and its myriad phytochemicals as a potential treatment and adjunctive agent for neurodegenerative diseases.

PURPOSE

This review evaluated the neuroprotective potential of C. sativa's active constituents for potential therapeutic use in dementia and Alzheimer's disease, based on published studies demonstrating efficacy in experimental preclinical settings associated with neurodegeneration.

STUDY DESIGN

Relevant information on the neuroprotective potential of the C. sativa's phytoconstituents in preclinical studies (in vitro, in vivo) were included. The collated information on C. sativa's component bioactivity was organized for therapeutic applications against neurodegenerative diseases.

METHODS

The therapeutic use of C. sativa related to Alzheimer's disease relative to known phytocannabinoids and other phytochemical constituents were derived from online databases, including PubMed, Elsevier, The Plant List (TPL, www.theplantlist.org), Science Direct, as well as relevant information on the known pharmacological actions of the listed phytochemicals.

RESULTS

Numerous C. sativa -prevalent phytochemicals were evidenced in the body of literature as having efficacy in the treatment of neurodegenerative conditions exemplified by Alzheimer's disease. Several phytocannabinoids, terpenes and select flavonoids demonstrated neuroprotection through a myriad of cellular and molecular pathways, including cannabinoid receptor-mediated, antioxidant and direct anti-aggregatory actions against the pathological toxic hallmark protein in Alzheimer's disease, amyloid β.

CONCLUSIONS

These findings provide strong evidence for a role of cannabis constituents, individually or in combination, as potential neuroprotectants timely to the emergent use of medicinal cannabis as a novel treatment for neurodegenerative diseases. Future randomized and controlled clinical studies are required to substantiate the bioactivities of phytocannabinoids and terpenes and their likely synergies.

Influence of emulsifier type and encapsulating agent on the in vitro digestion of fish oil-loaded microcapsules produced by spray-drying

The influence of the emulsifier type and the encapsulating agent on the bioaccessibility of microencapsulated fish oil was investigated. Fish oil-loaded microcapsules were produced by spray-drying using carbohydrate-based encapsulating agents (glucose syrup or maltodextrin). Whey protein concentrate hydrolysate (WPCH) or Tween 20 (TW20) were used as the emulsifiers. The microcapsules were subjected to a three-phase in vitro digestion (oral, gastric, and intestinal phase) and the changes in the physicochemical properties of the samples were monitored throughout the simulated gastrointestinal tract (oil droplet size, ζ-potential, and microstructure). The lipolysis rate and extent were evaluated at the intestinal digestion phase. Contrary to the encapsulating agent, the emulsifier used in the infeed emulsion formulation significantly influenced lipid digestion. WPCH-based interfacial layer prevented oil droplets coalescence during and after processing more efficiently than TW20, which resulted in an increased specific surface area for lipases to adsorb and thus a higher bioaccessibility of the microencapsulated oil.

A fungal cellulose nanocrystals-based approach to improve the stability of triterpenes loaded Pickering emulsion

Depolysaccharide residues of edible fungus Pleurotus eryngii (dePSR-Pe), a mushroom industry waste, have abundant cellulose. In this study, the cellulose nanocrystals of P. eryngii (PeCNs) were extracted by hydrochloric acid. Results showed that the length of PeCNs is 469 ± 76.41 nm with a high aspect ratio of 40-100 and needle morphology. The structural characterization revealed that PeCNs had good thermal stability (approach 300 °C) and high crystallinity (84.2 %). An O/W Pickering emulsion stabilized with PeCNs was prepared to inhibit lipid oxidation and improve the loading capacity of triterpenes of P. coco. Unimodal size distribution of emulsion droplets was obtained under an optimized aqueous-phase condition to form a metastable emulsion, regardless of varying oil-water volume ratio <50/50. In vitro digestion study suggested that triterpenes-loaded Pickering emulsion had 1-3 times higher drug stability than bulk oil. These metastable Pickering emulsions call for fewer nanoparticles and provide a new strategy for the industry application of cellulose nanocrystals at less cost.

A review of recent progress in improving the bioavailability of nutraceutical-loaded emulsions after oral intake

Increasing awareness of the health benefits of specific constituents in fruits, vegetables, cereals, and other whole foods has sparked a broader interest in the potential health benefits of nutraceuticals. Many nutraceuticals are hydrophobic substances, which means they must be encapsulated in colloidal delivery systems. Oil-in-water emulsions are one of the most widely used delivery systems for improving the bioavailability and bioactivity of these nutraceuticals. The composition and structure of emulsions can be designed to improve the water dispersibility, physicochemical stability, and bioavailability of the encapsulated nutraceuticals. The nature of the emulsion used influences the interfacial area and properties of the nutraceutical-loaded oil droplets in the gastrointestinal tract, which influences their digestion, as well as the bioaccessibility, metabolism, and absorption of the nutraceuticals. In this article, we review recent in vitro and in vivo studies on the utilization of emulsions to improve the bioavailability of nutraceuticals. The findings from this review should facilitate the design of more efficacious nutraceutical-loaded emulsions with increased bioactivity.

3D printed MCT oleogel as a co-delivery carrier for curcumin and resveratrol

Designing a suitable matrix to protect sensitive bioactive compounds is an important stage in nutraceutical development. In this study, emulsion templated medium-chain triglycerides (MCT) oleogel was developed as co-delivery carriers for synergistic nutraceuticals, curcumin, and resveratrol and to 3D print in customized shapes for personalized nutrition. To obtain the stable emulsion, gelatin and gellan gum were added such that their protein-polysaccharide interaction helps in the structuring of the oil phase. Increasing the amount of gellan gum had a positive effect on stabilizing the emulsion but became the critical parameter during 3D printing. Hence, gellan gum of 1.5% (w/v) and gelatin at 10% (w/v) of water were considered optimum to produce a stable 30% O/W emulsion for 3D printing. Upon analyzing the in-vitro digestion behavior of the oleogel, it was observed that the bioactives were protected under oral and gastric conditions and allowed intestinal targeted delivery. The total bioaccessible fraction increased up to 1.13-fold and 1.2-fold for curcumin and resveratrol respectively compared to control (MCT oil). The FFAs release profile also indicated that gelators play an important role in lipase activity. Also, the ex-vivo everted gut sac analysis showed enhanced permeation of about 1.83 times and 1.13 times for curcumin and resveratrol respectively. Thus, this study provides useful insights into the 3D printing of emulsion templated oleogel as personalized nutraceutical carriers.

Tannic Acid-Aminated Sugar Beet Pectin Nanoparticles as a Stabilizer of High-Internal-Phase Pickering Emulsions

Pickering stabilizers with additional antioxidant, photostabilizing, and metal-chelating properties are suitable for structuring multifunctional Pickering emulsion systems. Tannic acid (TA) is a potential material which when adsorbed onto the interface may impart antioxidant, UV-light-shielding, and chelating properties to Pickering stabilizers. Herein, we report a type of TA polyelectrolyte nanoparticles (NPs) fabricated following a complexation between TA and aminated sugar beet pectin (SBP-NH₂). This study is geared toward investigating the performance of TA/SBP-NH₂ NPs in stabilizing Pickering emulsions and protecting β-carotene from degradation. TA/SBP-NH₂ NPs formed under optimum conditions had a mean diameter of 82 nm with a sphere-like shape. Because of their favorable surface wettability (91.2°), TA/SBP-NH₂ NPs promoted formation of the low-, medium-, and high-internal-phase Pickering emulsions (HIPEs) in an oil volume fraction (φ)-dependent manner; the TA/SBP-NH₂ NP-stabilized HIPE demonstrated viscoelastic properties increasing with the increasing concentration (c) of nanoparticles. Due to the excellent storage stability and UV light-absorbing capacity, the photostability of β-carotene was significantly improved by a TA/SBP-NH₂ NP-stabilized HIPE (φ = 0.75; c = 3 mg/mL). Altogether, this study highlights that TA/SBP-NH₂ NPs have potential applications in structuring Pickering emulsions with improved protective effects on loaded lipophilic compounds.