Rapid chemical reduction synthesis of copper nanoclusters with blue fluorescence for highly sensitive detection of furazolidone

Tannic acid (TA), as a stabilizing agent, was successfully utilized to establish blue-emitting copper nanoclusters (TA-Cu NCs) on the basis of a facile chemical reduction preparation method. Characterization results proved successful synthesis of TA-Cu NCs with uniform size and excellent stability. TA-Cu NCs exhibited a blue emission wavelength at 431 nm when excited at 364 nm. Interestingly, the as-prepared TA-Cu NCs were selectively quenched by furazolidone based on static quenching. In addition, this analysis platform for furazolidone detection had an excellent linear range from 0.5 to 120 μM with a detection limit of 0.074 μM (S/N = 3). Furthermore, the accuracy of this sensing method was successfully confirmed by detecting furazolidone in bovine serum samples, indicating that TA-Cu NCs had bright application prospects.

Biomass fly ash as nanofiller to improve the dielectric properties of low-density polyethylene for possible high-voltage applications

Flexible capacitive energy storage applications require polymer nanocomposites with high dielectric properties, which can be accomplished by addition of inorganic nanofillers to the polymer matrix. Low-density polyethylene (LDPE), known for its good dielectric characteristics and wide use in electrical insulation have been investigated for the desired applications. However, the improvement of its breakdown strength still continues with the use of various nanomaterials employed as nanofillers. In this study, a waste-derived material known as biomass fly ash (BFA) as a nanofiller to improve the dielectric properties of LDPE has been explored. BFA exhibits versatility in its composition with various metal oxides, making it an attractive choice as a nanofiller. The BFA-LDPE sheets were prepared using a conventional solvent mixing and subsequent hot-pressing process, incorporating BFA loadings ranging from 1 % to 4 wt%. The effects of different BFA loadings were carefully examined, and the synthesized nanocomposites were extensively characterized using various characterization methods, such as XRD, SEM, FTIR, TGA and dielectric constant measurements, to investigate the crystallographic properties, morphology, chemical composition, and thermal stability. Among all the nanocomposites, 4 wt%BFA-LDPE exhibited the highest dielectric constant, with a value of 11.58, compared to simple LDPE that had a dielectric constant of 8.33. This improvement is ascribed to the synergistic effects of different inorganic metal oxides (SiO2, MgO, and Fe2O3) present in BFA. The results showed a significant enhancement in dielectric properties, indicating that the waste-derived BFA can be purposefully applied as an effective nanofiller in the LDPE-based composites with even less than 4% loading for electrical insulating applications in future studies.

Recent Advances in Polyurethane/POSS Hybrids for Biomedical Applications

Advanced organic-inorganic materials-composites, nanocomposites, and hybrids with various compositions offer unique properties required for biomedical applications. One of the most promising inorganic (nano)additives are polyhedral oligomeric silsesquioxanes (POSS); their biocompatibility, non-toxicity, and phase separation ability that modifies the material porosity are fundamental properties required in modern biomedical applications. When incorporated, chemically or physically, into polyurethane matrices, they substantially change polymer properties, including mechanical properties, surface characteristics, and bioactivity. Hence, this review is dedicated to POSS-PU composites that have recently been developed for applications in the biomedical field. First, different modes of POSS incorporation into PU structure have been presented, then recent developments of PU/POSS hybrids as bio-active composites for scaffolds, cardiovascular stents, valves, and membranes, as well as in bio-imaging and cancer treatment, have been described. Finally, characterization and methods of modification routes of polyurethane-based materials with silsesquioxanes were presented.

Rearranged Copolyurea Networks for Selective Carbon Dioxide Adsorption at Room Temperature

Copolyurea networks (co-UNs) were synthesized via crosslinking polymerization of a mixture of tetrakis(4-aminophenyl)methane (TAPM) and melamine with hexamethylene diisocyanate (HDI) using the organic sol-gel polymerization method. The subsequent thermal treatment of between 200 and 400 °C induced the sintering of the powdery polyurea networks to form porous frameworks via urea bond rearrangement and the removal of volatile hexamethylene moieties. Incorporating melamine into the networks resulted in a higher nitrogen content and micropore ratio, whereas the overall porosity decreased with the melamine composition. The rearranged network composed of the tetraamine/melamine units in an 80:20 ratio showed the highest carbon dioxide adsorption quantity at room temperature. The results show that optimizing the chemical structure and porosity of polyurea-based networks can lead to carbon dioxide adsorbents working at elevated temperatures.

Polypropylene/Lignin/POSS Nanocomposites: Thermal and Wettability Properties, Application in Water Remediation

Compositing is an interesting strategy that has always been employed to introduce or enhance desired functionalities in material systems. In this paper, sponges containing polypropylene, lignin, and octavinyl-polyhedral oligomeric silsesquioxane (OV-POSS) were successfully prepared via an easy and elegant strategy called thermally induced phase separation (TIPS). To fully explore the behaviour of different components of prepared sponges, properties were characterized by a thermogravimetric analyser (TGA), differential scanning calorimetry (DSC), Fourier transform infrared measurement (FTIR), and scanning electron microscopy (SEM). Furthermore, wettability properties toward an organic liquid and oil were investigated. The FTIR analysis confirmed the chemical modification of the components. TGA and DSC measurements revealed thermal stability was much better with an increase in OV-POSS content. OV-POSS modified sponges exhibited ultra-hydrophobicity and high oleophilicity with water contact angles of more than 125°. The SEM revealed that POSS molecules acted as a support for reduced surface roughness. Moreover, OV-POSS-based blend sponges showed higher sorption capacities compared with other blend sponges without OV-POSS. The new blend sponges demonstrated a potential for use as sorbent engineering materials in water remediation.

Assembly of discrete and oligomeric structures of organotin double-decker silsesquioxanes: inherent stability studies

Discrete and oligomeric organotin DDSQs have been synthesized and characterized, both experimentally and through computational study. The stability of these compounds remains intrigued with the organization of their structure in the crystal lattice.

Study on the Structure and Dielectric Properties of Zeolite/LDPE Nanocomposite under Thermal Aging

Nanodoping is an effective way to improve the dielectric properties and the aging resistance of polyethylene. Nano-zeolite has a nano-level porous structure and larger specific surface area than ordinary nano-inorganic oxide, which can be used to improve dielectric properties of low-density polyethylene (LDPE) nanocomposite. The zeolite/LDPE nanocomposites were prepared and subjected to thermal aging treatment to obtain samples with different aging time. Using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and the differential scanning calorimetry (DSC) test to study the microscopic and structure characteristics, it was found that nano-zeolite doping can effectively reduce the thermal aging damage to the internal structure of the nanocomposite; carbonyl and hydroxyl decreased significantly during the thermal aging time, and the crystallinity effectively improved. Nano-zeolite doping significantly improved the morphology and strengthened the aging resistance of the nanocomposite. In the dielectric strength test, it was found that nanodoping can effectively improve the direct current (DC) and alternating current (AC) breakdown field strength and the stability after the thermal aging. The dielectric constant of nanocomposite can be reduced, and the dielectric loss had no obvious change during the aging process. Moreover, the zeolite/LDPE nanocomposite with the doping concentration of 1 wt % had the best performance, for the nano-zeolite was better dispersed.

The Effect of Bioactive Glass-Enhanced Orthodontic Bonding Resins on Prevention of Demineralization: A Systematic Review

At present, bioactive glasses (BAGs) are demonstrating promising results in the remineralization of hard tissues. Their bioactive properties can potentially overcome the demineralization effect accompanying orthodontic treatment. This review aimed to evaluate the effectiveness of bioactive glass enhanced orthodontic bonding resins on enamel remineralization, in addition to their antibacterial, ion release and acid neutralization effect. Four databases (PubMed, MEDLINE, Web of Science and Scopus) were searched. Two hundred and fifty-one full-text articles were screened independently, out of which seven studies satisfied the inclusion criteria. Quality appraisal was performed by two independent reviewers. Methodologies used to assess the anti-demineralization effect included Micro-Computed Tomography, Polarized Light Microscopy and Hardness Testing (Knoop and Berkovich). All seven articles confirmed the superior remineralization effect of BAG orthodontic bonding resins compared to their non-BAG counterparts. A proportional relationship was proved between BAG concentrations and increased anti-demineralization effect. The addition of antibacterial agents to BAG does not necessarily improve its anti-demineralization effect. Although studies have confirmed the effectiveness of BAG orthodontic bonding resins on enamel remineralization, there was a degree of heterogeneity across studies due to the lack of an in vitro studies standardized protocol.

Bi-Layered Porous/Cork-Containing Waste-Based Inorganic Polymer Composites: Innovative Material towards Green Buildings

Reduction of the energy consumption and CO2 emissions by the building sector might be a huge driver to mitigate climate change. One promising approach to mitigate energy consumption is the use of lightweight and low thermal-conductivity materials that could reduce the energy losses inside buildings and at the same time the use of heating and cooling devices that generate associated CO2 emissions. In this study, different strategies to produce lightweight and low thermal conductivity inorganic polymers were evaluated and compared, including the first ever production of bi-layered porous/cork-containing waste-based inorganic polymer composites. The bi-layered composites showed the lowest density (461 kg/m3) and thermal conductivity (94.9 mW/m K) values and reasonable compressive strength (0.93 MPa) demonstrating their interesting potential for enhancing the energy efficiency of buildings. Moreover, these composites were produced at room temperature, using an industrial waste (biomass fly ash) as precursor and a highly sustainable and renewable resource as light aggregate (cork), preventing the depletion of natural resources and the use of fossil-fuel derivates, respectively.

Fabrication, multi-scale characterization and in-vitro evaluation of porous hybrid bioactive glass polymer-coated scaffolds for bone tissue engineering

Bioactive glass-based scaffolds are commonly used in bone tissue engineering due to their biocompatibility, mechanical strength and adequate porous structure. However, their hydrophobicity and brittleness limits their practical application. In this study, to improve nanomechanical properties of such scaffolds, pure bioactive hybrid glass and two bioactive hybrid glass-polymer coated composites were fabricated. A complementary micro and nanoscale characterization techniques (SEM, AFM, μCT, FTIR, compressive test, goniometer) were implemented for detailed description of architecture and physicochemical properties of hybrid bioactive glass-based scaffolds with emphasis on nano-mechanics. The final step was in-vitro evaluation of three dimensional macroporous structures. Our findings show that after polymer addition, architecture, topography and surface properties of the scaffolds were changed and promoted favoured behaviour of the cells.

Modification of Polyhedral Oligomeric Silsesquioxanes (POSS) Molecules by Ruthenium Catalyzed Cross Metathesis

The scope of ruthenium (Ru)-catalyzed cross metathesis (CM) of allyl-decorated polyhedral oligomeric silsesquioxanes (POSS) was explored. A variety of different commercial and non-commercial ruthenium complexes were tested to determine that the nitro-activated Ru catalyst is optimal for this transformation. The reported transformation was used to prepare selected hybrid steroid-POSS compounds.

Selected developments and medical applications of organic-inorganic hybrid biomaterials based on functionalized spherosilicates

Well-defined and tailor-made spherosilicates and POSS-based (POSS = Polyhedral Oligomeric Silsesquioxanes) (nano)composites with interesting chemical and mechanical properties have applications in the widely-regarded field of innovative biomaterials. They can serve as delivery systems, three-dimensional scaffolds for specific tissue engineering, biomaterials for orthopedic, cardiovascular, and reconstructive surgery, etc. Such organic-inorganic hybrids are much more effective biomaterials than pure polymers, bioglasses, metals, alloys, and ceramics currently used in medical applications and are considered as next-generation systems in innovative medical approaches. This range of applications creates a strong impetus for novel, cheap, and easy-to-scale-up methods for their synthesis. In this review (highlights since 2006), selected biomaterials consisting of various polymeric derivatives such as polymethacrylates, polylactides, polycaprolactones, polyurethanes, etc., which serve as organic side-arms of POSS and can create polymer platforms for precisely localized spherosilicates among organic matrices, are discussed as a new generation of silicon-based biosystems using spherosilicates, promising biomaterials with a particular use in soft- and hard-tissue engineering.