An oxygen vacancy-rich BiO2-x/COF heterojunction for photocatalytic degradation of diclofenac

A BiO2-x/COF composite was successfully synthesized by simple mechanical ball milling. Compared to pure BiO2-x and COFs, the BiO2-x/COF composite (1 : 9) showed superior photocatalytic capability. Under visible light irradiation for 90 min, the photocatalytic degradation rate of DCF reached 97%. In addition, the characterization results showed that the formation of heterojunctions and the increase in oxygen vacancy concentration were the reasons for the enhancement of the photocatalytic activity. It is confirmed by free radical capture experiments that ˙O2- and h+ are the main reactive substances in the photocatalytic process. The photocatalytic degradation mechanism of the composite and the photocatalytic degradation pathway of diclofenac were deduced.

Enhanced antibiotic degradation via photo-assisted peroxymonosulfate over graphitic carbon nitride nanosheets/CuBi2O4: Highly efficiency of oxygen activation and interfacial charge transfer

Improving the activation capacity of peroxymonosulfate (PMS) to increase radical and non-radical production is critical for antibiotic degradation. However, how to boost reactive oxygen species (ROS) and speed interfacial charge transfer remains an essential challenge. We report a coupling system of 10 %CNNS/CuBi2O4 photocatalyst and sulfate radical-based advanced oxidation processes (SO4--AOPs) to enhance the activation of PMS and improve antibiotic degradation. Owing to highly efficient oxygen activation and interfacial charge transfer, the degradation efficiency of the photo-assisted PMS system was as high as 51.6 times and 2.8 times that of photocatalyst and SO4--AOPs alone, respectively. Importantly, the highly efficient oxygen activation resulted in the production of O2-, which in turn could utilize the excess electrons generated through efficient interfacial charge transfer to convert into non-radical 1O2. The total organic carbon (TOC) elimination effectiveness of the photo-assisted PMS system reached 82 % via the synergy of radicals and non-radicals (O2-, OH, 1O2, SO4-, h+). This system also had excellent potential for reducing the generation and toxicity of disinfection by-products (DBPs), as evidenced through significant reductions in concentrations of trichloromethane (TCM), dichloroacetic acid (DCAA), and trichloronitromethane (TCNM) by 76 %, 64 %, and 35 %, respectively, providing an effective and eco-friendly strategy for antibiotic treatment.

Water-stable perovskite CsPb2Br5/CdSe quantum dot-based photoelectrochemical sensors for the sensitive determination of dopamine

A heterojunction of CdSe quantum dots in situ grown on the perovskite CsPb2Br5 (CsPb2Br5/CdSe) for water-stable photoelectrochemical (PEC) sensing was simply synthesized using the hot-injection method. Due to the inherent built-in electric field and the matching band structure between CsPb2Br5 and CdSe, the CsPb2Br5/CdSe p-n heterojunction demonstrates enhanced photoelectrochemical properties. Accelerated interfacial charge transfer and increased electron-hole pair separation enable hydrolysis-resistant CsPb2Br5/CdSe sensors to exhibit heightened sensitivity with an ultra-low detection limit (0.0124 μM) and a wide linear range (0.4-303.9 μM) in subsequent dopamine detection. Moreover, the CsPb2Br5/CdSe sensors show excellent anti-interference ability, as well as remarkable stability and reproducibility in water solvent. It is noteworthy that this work is conducted in an aqueous environment, which provides an inspiring and convenient way for photoelectric and photoelectrocatalysis applications based on water-resistant perovskites.

Prism-like integrated Bi2WO6 with Ag-CuBi2O4 on carbon nanotubes (CNTs) as an efficient and robust S-scheme interfacial charge transfer photocatalyst for the removal of organic pollutants from wastewater

Photocatalytic hybrid carbon nanotubes (CNTs)-mediated Ag-CuBi2O4/Bi2WO6 photocatalyst was fabricated using a hydrothermal technique to effectively eliminate organic pollutants from wastewater. The as-prepared samples were characterized via Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction patterns (XRD), high-resolution transmission electron microscope (HR-TEM), UV-vis Diffuse Reflectance spectrum (UV-Vis DRS), and photoluminescence (PL) studies. The photocatalytic performance of fabricated pristine and hybrid composites was examined by photo-degradation of toxic dye viz. Rhodamine B (RhB) under visible light. Photo-degradation results revealed that the fabricated Ag-CuBi2O4/CNTs/Bi2WO6 semiconductor photocatalyst followed pseudo-first-order kinetics and displayed a higher photocatalytic rate, which was found to be approximately 3.33 and 2.35 times higher than the pristine CuBi2O4 and Bi2WO6 semiconductor photocatalyst, respectively. Re-cyclic results demonstrated that the formed composite owns excellent stability, even after five consecutive cycles. As per the matched Fermi level of CNTs in between Ag-CuBi2O4 and Bi2WO6, carbon nanotubes severed as electron transfer-bridge, Ag doping on CuBi2O4 surface successfully increased photon absorption all across CuBi2O4 surface. Also, it hindered the assimilation of photoinduced electron-hole pairs. The increased photocatalytic efficiency is contributed to the uniform dispersion of photo-generated electron-hole pairs via the construction of an S-scheme system. ROS trapping and ESR experiments suggested that (∙OH) and (O2-∙) were the main radical species for enhanced photo-degradation of RhB dye. The current investigation, from our perspective, highlights the new insights for the fabrication of practical CNTs-mediated S-scheme-based semiconductor photocatalyst for the resolution of environmental issues based on practical considerations.

Smartphone-based photoelectrochemical immunoassay for carcinoembryonic antigen based on BiOCl/CuBi2O4 heterojunction

Photoelectrochemical (PEC) immunoassay has been widely developed for biomarker detection, but most include heavy and expensive instruments that are not suited for portable and on-site detection. In this work, the PEC immunoassay platform for mobile phones was reported for flexible, rapid, low-cost detection of carcinoembryonic antigen (CEA). The PEC detection platform was successfully composed of disposable screen-printed carbon electrodes, a micro-electrochemical workstation, a flashlight (the excitation light source), and a smartphone with a companion software with a micro-electrochemical workstation for rapid and on-site detection of target biomarkers. In this portable smartphone-based PEC system, the S-scheme heterojunction BiOCl/CuBi2O4 was effectively excited due to the efficient electron transfer rate and excellent photocurrent response under visible light. Specifically, the sandwich-type immunoreaction for capturing target biomarkers introduced alkaline phosphatase (ALP) labeled gold nanoparticles (Au NPs). The addition of CEA increased the ascorbic acid (AA) content and enhanced the photocurrent. The proposed immunoassay presented a good linear with the logarithm of CEA concentrations range within 0.01-40 ng mL-1, and the detection limit of 3.5 pg mL-1 (S/N = 3). Therefore, the portable detection platform offered an implementable approach to the development of miniaturized and portable photoelectrochemical detectors and on-site detection technology.

Recent advances in spinel ferrite-based magnetic photocatalysts for efficient degradation of organic pollutants

Although spinel ferrite (MFe₂O₄, M = Zn, Ni, Mn, etc.) has been reported as a promising catalyst, its low photocatalytic activity under visible light greatly restricts its practical application. Spinel ferrite-based photocatalytic composites have exhibited improved efficiency for pollutant degradation, due to interface charge carrier mobility and structural modification. Meanwhile, due to its magnetism and stability, spinel ferrite composite can be easily recycled for long-term utilization, showing its high application potential. In this review, the recent advances in the construction and photocatalytic degradation of spinel ferrite composites are discussed, with an emphasis on the relationship between structural property and photocatalytic activity. In addition, to improve their photocatalytic application, the challenges, gaps and future research prospects are proposed.

Removal of tetracycline from wastewater using g-C3N4 based photocatalysts: A review

Tetracycline is currently one of the most consumed antibiotics for human therapy, veterinary purpose, and agricultural activities. Tetracycline worldwide consumption is expected to rise by about more than 30% by 2030. The persistence of tetracycline has necessitated implementing and adopting strategies to protect aquatic systems and the environment from noxious pollutants. Here, graphitic carbon nitride-based photocatalytic technology is considered because of higher visible light photocatalytic activity, low cost, and non-toxicity. Thus, this review highlights the recent progress in the photocatalytic degradation of tetracycline using g-C₃N₄-based photocatalysts. Additionally, properties, worldwide consumption, occurrence, and environmental impacts of tetracycline are comprehensively addressed. Studies proved the occurrence of tetracycline in all water matrices across the world with a maximum concentration of 54 μg/L. Among different g-C₃N₄-based materials, heterojunctions exhibited the maximum photocatalytic degradation of 100% with the reusability of 5 cycles. The photocatalytic membranes are found to be feasible due to easiness in recovery and better reusability. Limitations of g-C₃N₄-based wastewater treatment technology and efficient solutions are also emphasized in detail.

A novel CuBi2O4/polyaniline composite as an efficient photocatalyst for ammonia degradation

A novel polyaniline (PANI) coupled CuBi₂O₄ photocatalyst was successfully synthesized via in situ polymerization of aniline with pre-synthesized CuBi₂O₄ composites. The structure and morphology of the synthesized CuBi₂O₄/PANI composite photocatalyst were characterized by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) and the photocatalytic performance were evaluated through degradation process of ammonia in water under visible light irradiation. The resultant CuBi₂O₄/PANI composite showed exceptional stability as its structure and morphology persisted even after being immersed in water for 2 days. The composite photocatalyst exhibited improved charge transport properties due to the electrical conductivity of the PANI protective layer, leading to enhanced photoelectrochemical activity in water and removal of ammonia. PANI with CuBi₂O₄ (10% wt) heterostructure was applied for photodegradation of ammonia and exhibited a 96% ammonia removal efficiency (30 mg/l with 0.1 g photocatalyst and 180 min), as compared to PANI (78%) and CuBi₂O₄ (70%). The degradation was attributed to the efficient charge transfer (e^- and h⁺) and formation of reactive oxygen species upon simulated sunlight exposure. The present work suggests that the CuBi₂O₄/PANI photocatalyst can be synthesized in a simple process and provides an excellent adsorption capacity, high photocatalytic activity, long term stability, and reusability making it a promising alternative for ammonia removal from wastewater.

Novel sphere-like copper bismuth oxide fabricated via ethylene glycol-introduced solvothermal method with improved adsorptive and photocatalytic performance in sulfamethazine removal

In this research, ethylene glycol-introduced solvothermal method was employed to fabricate a novel sphere-like CuBi₂O₄ material to improve the adsorptive and photocatalytic performance of conventional CuBi₂O₄. A series of characterization has been applied to investigate properties of the obtained CuBi₂O₄ (CBO-EG3). Compared with conventional rod-like CuBi₂O₄ (CBO), the synthesized sphere-like CBO-EG3 exhibited rough surface, larger specific surface area, and more effective separation of photo-generated carriers, which overcome main shortcomings of CuBi₂O₄. The removal efficiency of typical antibiotic sulfamethazine (SMZ) reached almost 100% under the optimal experimental conditions. About 70% of SMZ could be adsorbed in 180-min dark reaction, with residual being photodegraded in 30 min. CBO-EG3 showed much higher photocatalytic efficiency than pure CBO, attributing to its highly effective photo-induced electron and hole separation. Meanwhile, substantial adsorption of pollutant on CBO-EG3 contributed vastly to removal of SMZ, photo-generated electrons and holes inclined to react with adsorbed SMZ directly, and photocatalytic process was mainly led by non-radical reaction. Elimination of SMZ in actual water samples and recycling experiment were also performed to evaluate CBO-EG3's practical application potential. This study delivered a method to promote CuBi₂O₄'s adsorptive and photocatalytic ability, which could expand the application of CuBi₂O₄ in wastewater treatment.

Recent development on core-shell photo(electro)catalysts for elimination of organic compounds from pharmaceutical wastewater

Pharmaceutical organics are a vital milestone in contemporary human research since they treat various diseases and improve the quality of human life. However, these organic compounds are considered one of the major environmental hazards after the conception, along with the massive rise in antimicrobial resistance (AMR) in an ecosystem. There are various biological and catalytic technologies existed to eliminate these organics in aqueous system with their limitation. Advanced Oxidation processes (AOPs) are used to decompose these pharmaceutical organic compounds in the wastewater by generating reactive species with high oxidation potential. This review focused various photocatalysts, and photocatalytic oxidation processes, especially core-shell materials for photo (electro)catalytic application in pharmaceutical wastewater decomposition. Moreover, we discussed in details about the design and recent developments of core shell catalysts and comparison for photocatalytic, electrocatalytic and photo electrocatalytic applications in pharmaceutical wastewater treatment. In addition, the mixture of inorganic and organic core-shell materials, and metal-organic framework-based core-shell catalysts discussed in detail for antibiotic degradation.

Construction of high-performance g-C3N4-based photo-Fenton catalysts by ferrate-induced defect engineering

A highly-efficient Fe–g-C3N4 photo-Fenton catalyst was prepared using ferrate as a critical iron source and defect control additive. The complementary synergistic effects of Fe species and defect sites promote photoelectron transfer.

One-pot hydrothermal synthesis of CuBi2O4/BiOCl p–n heterojunction with enhanced photocatalytic performance for the degradation of tetracycline hydrochloride under visible light irradiation

The formation of a CuBi2O4/BiOCl p–n heterojunction enhances visible light absorption and promotes the separation of photogenerated electron–hole pairs.

In situ construction of a C3N5 nanosheet/Bi2WO6 nanodot S-scheme heterojunction with enhanced structural defects for the efficient photocatalytic removal of tetracycline and Cr(vi)

A novel 2D/0D C3N5/Bi2WO6 S-scheme heterojunction with enhanced structural defects has been designed for the efficient elimination of pharmaceutical antibiotics and Cr(vi).

Uplifting the charge carrier separation and migration in Co-doped CuBi2O4/TiO2 p-n heterojunction photocathode for enhanced photoelectrocatalytic water splitting

Here, cobalt-doped copper bismuth oxide (Co-CuBi₂O₄) was synthesized via a facile hydrothermal method for photoelectrocatalytic (PEC) hydrogen production. The results disclosed that the 5% Co-doped CuBi₂O₄ has better PEC activity which is ∼3 fold higher than pristine CuBi₂O₄. The doping of cobalt in CuBi₂O₄ improves the interfacial charge transfer at an electrode/electrolyte interface and reduces the recombination rate of photogenerated electron-hole pairs. This higher performed 5% Co-doped CuBi₂O₄ photocathode further modified with TiO₂-P25 to form a Co-CuBi₂O₄/TiO₂ p-n heterojunction. This Co-CuBi₂O₄/TiO₂ photocathode displayed a photocurrent density of 330 μA cm^-2 at +0.5 V vs. RHE which was ∼2 fold higher than Co-CuBi₂O₄. Because this p-n junction affords inner electric field in the space charge region that helps for further minimization of electron-hole recombination, which facilitate efficient charge separation and transport thereby enhance the PEC water reduction.

Rational tailoring of the electronic structure for the SrxNaTayO3 semiconductor: Insights into its enhanced photoactivity and optical property

NaTaO₃ (NTO), as a popular photocatalyst with the prominent redox ability, largely straddles across the conduction band minimum (CBM) and valence band maximum (VBM) edge over Fermi level. Pristine NTO exhibits the poor light-harvesting ability and the rapid recombination of electron-hole pairs. We proposed an effective method to improve the photocatalytic property of NTO (ABO₃-type) by substituting B site with Sr. The Sr_xNaTa_yO₃ (SNTO) exhibited the boosted photocatalytic activity toward tetracycline oxidation under solar light irradiation. The rate constant for S_0.5NTO (molar ratio of Sr: Ta = 1 : 2) was 5.1 times higher than the pure NTO. DFT results indicated that the Sr 3d orbital combining the O 2p and Ta 5d hybrid orbitals, widened the VB of SNTO. The band gap was narrowed from 3.86 to 2.82 eV after Sr substitution, which enhanced its light-harvesting ability. The VBM moved upward for 1.42 V and the CBM moved upward for 0.38 V. The shifts of the CBM and VBM, together with the more stretched Ta-O-Ta configuration, highly facilitated the electron-hole pair separation in SNTO. These electronic structure changes accounted for the significant photocatalytic performance enhancement of NaTaO₃ via Sr substitution for B-site-Ta.

Boosting of photocatalytic hydrogen evolution via chlorine doping of polymeric carbon nitride

Chlorine is found to be a suitable element for the modification of polymeric carbon nitride properties towards an efficient visible-light photocatalytic activity. In this study, chlorine-doped polymeric carbon nitride (Cl-PCN) has been examined as a photocatalyst in the hydrogen evolution reaction. The following aspects were found to enhance the photocatalytic efficiency of Cl-PCN: (i) unique location of Cl atoms at the interlayers of PCN instead of on its π-conjugated planes, (ii) slight bandgap narrowing, (iii) lower recombination rate of the electron-hole pairs, (iv) improved photogenerated charge transport and separation, and (v) higher reducing ability of the photogenerated electrons. The above factors affected the 4.4-fold enhancement of the photocatalytic efficiency in hydrogen evolution in comparison to the pristine catalyst.

Simulating the performance of a highly efficient CuBi2O4-based thin-film solar cell

In this study, copper bismuth oxide (CuBi2O4) absorber-based thin film heterojunction solar cell structure consisting of Al/FTO/CdS/CuBi2O4/Ni has been proposed. The proposed solar cell device structure has been modeled and analyzed by using the solar cell capacitance simulator in one dimension (SCAPS-1D) software program. The performance of the proposed photovoltaic device is evaluated numerically by varying thickness, doping concentrations, defect density, operating temperature, back metal contact work function, series and shunt resistances. The current density–voltage behaviors at dark and under illumination are investigated. To realize the high efficiency CuBi2O4-based solar cell, the thickness, acceptor and donor densities, defect densities of different layers have been optimized. The present work reveals that the power conversion efficiency can be enhanced by increasing the absorber layer thickness. The efficiency of 26.0% with open-circuit voltage of 0.97 V, short-circuit current density of 31.61 mA/cm2, and fill-factor of 84.58% is achieved for the proposed solar cell at the optimum 2.0-μm-thick CuBi2O4 absorber layer. It is suggested that the p-type CuBi2O4 material proposed in the present study can be employed as a promising absorber layer for applications in the low cost and high efficiency thin-film solar cells.

One Step Synthesis of Tetragonal-CuBi2O4/Amorphous-BiFeO3 Heterojunction with Improved Charge Separation and Enhanced Photocatalytic Properties

Tetragonal CuBi₂O₄/amorphous BiFeO₃ (T-CBO/A-BFO) composites are prepared via a one-step solvothermal method at mild conditions. The T-CBO/A-BFO composites show expanded visible light absorption, suppressed charge recombination, and consequently improved photocatalytic activity than T-CBO or A-BFO alone. The T-CBO/A-BFO with an optimal T-CBO to A-BFO ratio of 1:1 demonstrates the lowest photoluminescence signal and highest photocatalytic activity. It shows a removal rate of 78.3% for the photodegradation of methylene orange under visible light irradiation for 1 h. XPS test after the cycle test revealed the reduction of Bi³⁺ during the photocatalytic reaction. Moreover, the as prepared T-CBO/A-BFO show fundamentally higher photocatalytic activity than their calcinated counterparts. The one-step synthesis is completed within 30 min and does not require post annealing process, which may be easily applied for the fast and cost-effective preparation of photoactive metal oxide heterojunctions.

Hierarchical N-doped TiO2@Bi2WxMo1-xO6 core-shell nanofibers for boosting visible-light-driven photocatalytic and photoelectrochemical activities

Heterogeneous photocatalysis has been proven to be a promising approach to overcome the great challenges encountered with conventional technologies for environmental remediation. Herein, for the first time, a novel hierarchical architecture of nitrogen-doped TiO₂@Bi₂W_xMo_1-xO₆ (N-T@BWMO-x, x = 0-1.0) was rationally designed and fabricated through an electrospinning route followed by a solvothermal process. The photocatalytic activity of the as-prepared samples was evaluated based on the degradation of tetracycline hydrochloride (TC) under visible-light irradiation. The results indicated that the molar fraction of W/Mo has a strong impact on the photocatalytic efficiency and photoelectrochemical performance of the N-T@BWMO composites. Compared to N-TiO₂ and the binary composites, N-T@BWMO-0.25 exhibited outstanding photocatalytic activity and significant cycling stability. The enhanced photocatalytic activity can be synergistically linked to the excellent native adsorption, extended light-harvesting region, hierarchical structure, and strong interfacial interaction between N-TiO₂ and BWMO, which can effectively prolong the lifetime of charge-carriers. Moreover, active species-trapping and electron paramagnetic resonance results confirmed that holes and superoxide radicals were the dominant active species responsible for TC removal. A possible photocatalytic mechanism underlying the degradation of TC by N-T@BWMO-0.25 is also proposed. We expect that our findings will provide new insights into the use of highly efficient core-shell heterostructure photocatalysts, with potential applications in environmental decontamination.

Novel P-n Li2SnO3/g-C3N4 Heterojunction With Enhanced Visible Light Photocatalytic Efficiency Toward Rhodamine B Degradation

The design of highly efficient and stable photocatalysts to utilize solar energy is a significant challenge in photocatalysis. In this work, a series of novel p-n heterojunction photocatalysts, Li₂SnO₃/g-C₃N₄, was successfully prepared via a facile calcining method, and exhibited superior photocatalytic activity toward the photodegradation of Rhodamine B solution under visible light irradiation as compared with pure Li₂SnO₃ and g-C₃N₄. The maximum kinetic rate constant of photocatalytic degradation of Rhodamine B within 60 min was 0.0302 min⁻¹, and the composites still retained excellent performance after four successive recycles. Chemical reactive species trapping experiments and electron paramagnetic resonance demonstrated that hydroxyl radicals (·OH) and superoxide ions (·O2-) were the dominant active species in the photocatalytic oxidation of Rhodamine B solution, while holes (h⁺) only played a minor role. We demonstrated that the enhancement of the photocatalytic activity could be assigned to the formation of a p-n junction photocatalytic system, which benefitted the efficient separation of photogenerated carriers. This study provides a visible light-responsive heterojunction photocatalyst with potential applications in environmental remediation.

Carbon dot-based composites for catalytic applications

We summarize the construction methods and influencing factors of CDs-based composites and discuss their catalytic applications, including photocatalysis, chemical catalysis, peroxidase-like catalysis, Fenton-like catalysis and electrocatalysis.

Interfaces of graphitic carbon nitride-based composite photocatalysts

This review concentrates on the interface issues of g-C₃N₄-based photocatalysts, including methods for constructing interfaces, techniques for identifying interfaces, and the types and roles of the as-developed interfaces.

Short-Time Hydrothermal Synthesis of CuBi2O4 Nanocolumn Arrays for Efficient Visible-Light Photocatalysis

In this article, a short-time hydrothermal method is developed to prepare CuBi₂O₄ nanocolumn arrays. By using Bi(NO₃)₃·5H₂O in acetic acid and Cu(NO₃)₂·3H₂O in ethanol as precursor solutions, tetragonal CuBi₂O₄ with good visible light absorption can be fabricated within 0.5 h at 120 °C. Tetragonal structured CuBi₂O₄ can be formed after 15 min hydrothermal treatment, however it possesses poor visible light absorption and low photocatalytic activity. Extending the hydrothermal treatment duration to 0.5 h results in a significant improvement invisible light absorption of the tetragonal CuBi₂O₄. The CuBi₂O₄ obtained through 0.5 h hydrothermal synthesis shows a band gap of 1.75 eV and exhibits the highest photocatalytic performance among the CuBi₂O₄ prepared with various hydrothermal time. The removal rate of methylene blue by the 0.5 h CuBi₂O₄ reaches 91% under visible light irradiation for 0.5 h. This study proposes a novel strategy to prepare photoactive CuBi₂O₄ nanocolumn arrays within 0.5 h at a moderate temperature of 120 °C. The hydrothermal method provides a facile strategy for the fast synthesis of metal-oxide-based photocatalysts at mild reaction conditions.

Construction of a 0D/1D composite based on Au nanoparticles/CuBi2O4 microrods for efficient visible-light-driven photocatalytic activity

Photocatalysis is considered to be a promising technique for the degradation of organic pollutants. Herein, a 0D/1D composite photocatalyst consisting of Au nanoparticles (NPs) and CuBi₂O₄ microrods (Au/CBO) was designed and prepared by a simple thermal reduction-precipitation approach. It shows excellent photocatalytic performance in the degradation of tetracycline (TC). The maximum photocatalytic degradation rate constant for Au/CBO composites with 2.5 wt % Au NPs was 4.76 times as high as that of bare CBO microrods. Additionally, the 0D/1D Au/CBO composite also exhibited ideal stability. The significant improvement of the photocatalytic performance could be attributed to the improved light harvesting and increased specific surface area, enhancing photoresponse and providing more active sites. Our work shows a possible design of efficient photocatalysts for environmental remediation.

Study on highly enhanced photocatalytic tetracycline degradation of type Ⅱ AgI/CuBi2O4 and Z-scheme AgBr/CuBi2O4 heterojunction photocatalysts

Removal of antibiotics from aqueous solutions by photocatalysis is an advanced technology for environmental remediation. Herein, we have fabricated a series of AgX (X = I, Br)/CuBi₂O₄ composites through an in-situ precipitation method. The photocatalytic activity of the obtained photocatalysts was measured by the degradation of tetracycline (TC) under visible light irradiation (λ > 420 nm). All the AgX (X = I, Br)/CuBi₂O₄ composites exhibit much higher photocatalytic activity than that of pure CuBi₂O₄. The enhanced photocatalytic activity is mainly attributed to the efficient interfacial charge separation and migration in the AgX (X = I, Br)/CuBi₂O₄ heterojunctions. Meanwhile, AgX (X = I, Br)/CuBi₂O₄ heterojunctions display excellent photocatalytic stability, and the photocatalytic degradation rates were not obvious decreased even after five successive cycles. Based on the energy band structure, the radicals trapping and electronic spin resonance (ESR) experiments, the Z-scheme mechanism of AgBr/CuBi₂O₄ and type II mechanism of AgI/CuBi₂O₄ heterojunction photocatalysts were tentatively discussed, respectively.

A novel 3D/2D CdIn2S4 nano-octahedron/ZnO nanosheet heterostructure: facile synthesis, synergistic effect and enhanced tetracycline hydrochloride photodegradation mechanism

The synergistic effect and the unique 3D/2D hybrid structure of CIS/ZO-x heterojunctions are primarily responsible for the enhanced photocatalytic activity.

Protonated carbon nitride nanosheet supported IrO2 quantum dots for pure water splitting without sacrificial reagents

A novel photocatalyst with IrO₂ quantum dots anchored on g-C₃N₄ exhibits enhanced visible-light-driven overall water splitting.

Cu-enhanced photoelectronic and ethanol sensing properties of Cu2O/Cu nanocrystals prepared by one-step controllable synthesis

Cu₂O/Cu hetero-nanostructures with obviously improved photoelectric and ethanol sensing properties compared to Cu₂O are obtained by a one-step solution method.

Preparation of magnetically separable and recyclable carbon dots/NiCo2O4 composites with enhanced photocatalytic activity for the degradation of tetracycline under visible light

CDs/NiCo₂O₄ magnetic composite photocatalysts with enhanced photocatalytic activity were fabricated through a one-step calcination method.

Design of visible-light-response core–shell Fe2O3/CuBi2O4 heterojunctions with enhanced photocatalytic activity towards the degradation of tetracycline: Z-scheme photocatalytic mechanism insight

Core–shell Fe₂O₃/CuBi₂O₄ heterojunction photocatalysts with enhanced photocatalytic activity were fabricated through one-step hydrothermal method.