Pt-TiO2 catalysts for glycerol photoreforming: comparison of anatase, brookite and rutile polymorphs

We compared the H2 production from glycerol photoreforming for different TiO2 polymorphs, highlighting an increase of activity in the order Pt-rutile < Pt-P25 ≈ Pt-anatase < Pt-brookite with a different distribution of the reaction intermediates. We show that the highest ability to adsorb water and the different distribution of Pt active sites in brookite can positively influence its photoactivity.

Role of Partial Vacancy and Structural Distortion in the Stability of Nonstoichiometric Phases Ni7-δInSe2-xSx (1.26 ≥ δ ≥ 0.94; 0 ≤ x ≤ 1.33)

This study explores the structure and stability of partly disordered sulfur-substituted Ni5.74InSe2 (I4/mmm, a = 3.6766(1) Å, c = 18.8178(10) Å, Z = 2). The structure of Ni7-δInSe2-xSx (x = 0.2, 0.36, 0.66, 0.80, 0.94) compounds is isotypic to their parent Ni5.74InSe2 and can be viewed as alternating heterometallic Cu3Au-type ∞2[Ni3In] slabs and defective Cu2Sb-type ∞2[Ni4-δ(Se/S)2] slabs along the [001]-axis. Similar to the parent Se-compound, the Ni-Ch (Ch = chalcogen) fragment is non-stoichiometric and possesses a partially occupied Ni-site. It was observed that with sulfur insertion at the selenium site of Ni5.74InSe2, the interatomic distance between the partially occupied nickel and mixed (S/Se) sites decreases from ∼2.24 to ∼1.95 Å, and the occupancy of the disordered nickel site simultaneously increases. The limiting composition Ni6.06InSe0.67S1.33 (x = 1.33, δ = 0.94) is formed in the sulfur-rich region. Its average structure resembles the Ni6SnS2-type and has a similar motif to Ni5.74InSe2; the only difference is that Cu3Au-type ∞2[Ni3In] alternates with two types of Ni-Ch fragments (Cu2Sb or Li2O type units). By using first-principles electronic structure calculations, we explained the presence of partially disordered nickel sites in the Ni-Ch fragment and rationalized why the nickel site occupancy increases with sulfur insertion.

Characterisation of engineered titanium dioxide nanoparticles in selected food

Titanium dioxide (TiO2), an E171 manufacturer-made food additive, is extensively utilised as a colourant in drug and a food products. Some studies showed that most of confectionary and food items contain inexplicable particles. The aim of this article is to determine the size and structure of TiO2 nanoparticles in different food products. Ten food samples, including coffee cream, white chocolate concentrate, frosting, gum, yoghurt candy, hard candies and chewy candies, were investigated for this purpose. The crystalline structure and particle size of TiO2 were determined by Powder X-ray Diffraction (PXRD) and Transmission Electron Microscopy (TEM). TEM images revealed that a few of the extracted nanoparticles had a rod-like shape, but most were spherical. Also, the size of the TiO2 particle had a wide distribution between 12 and 450 nm. Thus, to avoid human health risk, crucial factors such as size, and shape should be considered and regulated by food authorities.

Estimation of genomic and mitochondrial DNA integrity in the renal tissue of mice administered with acrylamide and titanium dioxide nanoparticles

The Kidneys remove toxins from the blood and move waste products into the urine. However, the accumulation of toxins and fluids in the body leads to kidney failure. For example, the overuse of acrylamide and titanium dioxide nanoparticles (TiO2NPs) in many food and consumer products increases human exposure and risks; however, there are almost no studies available on the effect of TiO2NPs coadministration with acrylamide on the integrity of genomic and mitochondrial DNA. Accordingly, this study was conducted to estimate the integrity of genomic and mitochondrial DNA in the renal tissue of mice given acrylamide and TiO2NPs. To achieve this goal, mice were administrated orally TiO2NPs or/and acrylamide at the exposure dose levels (5 mg/kg b.w) and (3 mg/kg b.w), respectively, five times per week for two consecutive weeks. Concurrent oral administration of TiO2NPs with acrylamide caused remarkable elevations in the tail length, %DNA in tail and tail moment with higher fragmentation incidence of genomic DNA compared to those detected in the renal tissue of mice given TiO2NPs alone. Simultaneous coadministration of TiO2NPs with acrylamide also caused markedly high elevations in the reactive oxygen species (ROS) production and p53 expression level along with a loss of mitochondrial membrane potential and high decreases in the number of mitochondrial DNA copies and expression level of β catenin gene. Therefore, from these findings, we concluded that concurrent coadministration of acrylamide with TiO2NPs augmented TiO2NPs induced genomic DNA damage and mitochondrial dysfunction through increasing intracellular ROS generation, decreasing mitochondrial DNA Copy, loss of mitochondrial membrane potential and altered p53 and β catenin genes expression. Therefore, further studies are recommended to understand the biological and toxic effects resulting from TiO2NPs with acrylamide coadministration.

Polymorphic control in titanium dioxide particles

The hydrolysis-condensation reaction of TiO₂ was adapted to the phase inversion temperature (PIT)-nano-emulsion method as a low energy approach to gain control over the size and phase purity of the resulting metal oxide particles. Three different PIT-nano-emulsion syntheses were designed, each one intended to isolate high purity rutile, anatase, and brookite phase particles. Three different emulsion systems were prepared, with a pH of either strongly acidic (H₂O : HNO₃, pH ∼0.5), moderately acidic (H₂O : isopropanol, pH ∼4.5), or alkaline (H₂O : NaOH, pH ∼12). PIT-nano-emulsion syntheses of the amorphous TiO₂ particles were conducted under these conditions, resulting in average particle diameter distributions of ∼140 d nm (strongly acidic), ∼60 d nm (moderately acidic), and ∼460 d nm (alkaline). Different thermal treatments were performed on the amorphous particles obtained from the PIT-nano-emulsion syntheses. Raman spectroscopy and powder X-ray diffraction (PXRD) were employed to corroborate that the thermally treated particles under H₂O : HNO₃ (at 850 °C), H₂O : NaOH (at 400 °C), and H₂O : isopropanol (at 200 °C) yielded highly-pure rutile, anatase, and brookite phases, respectively. Herein, an experimental approach based on the PIT-nano-emulsion method is demonstrated to synthesize phase-controlled TiO₂ particles with high purity employing fewer toxic compounds, reducing the quantity of starting materials, and with a minimum energy input, particularly for the almost elusive brookite phase.

Paste Aging Spontaneously Tunes TiO2 Nanoparticles into Reproducible Electrosprayed Photoelectrodes

In this study, the spontaneous microstructure tuning of TiO₂ was observed by aging the ethanol/water TiO₂ paste for up to 20 days at ambient conditions. A dynamic light scattering study reveals that it formed the outstanding reproducible TiO₂ microstructure with a ∼200 nm average particle size and stabilizes in 6 to 20 days under an ambient atmosphere. Interestingly, the as-deposited day 15 sample spontaneously changed its crystallinity upon keeping the paste at ambient conditions; meanwhile the day 0 sample showed an amorphous structure. A dense, uniform, and stable TiO₂ electrode was cast on a fluorine doped-tin oxide substrate using the electrospray technique. We exploit the spontaneous evolution of the TiO₂ nanopowder to revisit the fabrication procedure of the TiO₂ photoelectrode for dye-sensitized solar cells (DSSCs). The controlled microstructure TiO₂ film was used in DSSCs, which, to the best of our knowledge, achieved the highest power conversion efficiency of 9.65% using N719 dye in sensitizing the TiO₂ photoanode.

Catalytic Activity of High-Surface-Area Amorphous MgO Obtained from Upsalite

The first aim of the research was to synthesize a pure Upsalite, which is an amorphous form of MgCO3, by modifying a procedure described in the literature, so that it would be the precursor of a high-surface, amorphous magnesium oxide. The results indicate that within the studied reaction conditions, the type of alcohol used as the reactant has the most pronounced effect on the yield of reaction. From the two alcohols that led to the highest yield of Upsalite, methanol gave a substantially larger surface area (794 vs. 191 m2 g−1). The optimized synthesis conditions of Upsalite were used to obtain MgO via thermolysis, whose activity in the transfer hydrogenation reaction (THR) from ethanol, 2-propanol and 2-pentanol to various carbonyl compounds was determined. The optimal conditions for the thermolysis were as follows: vacuum, T = 673 K as the final temperature, and a heating rate of 2 deg min−1. The high-surface, amorphous magnesia (SBET = 488 m2 g−1) was found to be a very selective catalyst to 4-t-butylcyclohexanone in THR, which led to a diastereoselectivity of over 94% to the E-isomer of 4-t-butylcyclohexanol for more than 3 h, with conversions of up to 97% with either 2-propanol or 2-pentanol as the hydrogen donor. In the case of acrolein and 2-n-propylacrolein being used as the hydrogen acceptors, the unsaturated alcohol (UOL) was the main product of the reaction, with higher UOL yields noted for ethanol than 2-propanol.

Phase Selection and Structure of Low-Defect-Density γ-Al2O3 Created by Epitaxial Crystallization of Amorphous Al2O3

A multistep phase sequence following the crystallization of amorphous Al₂O₃ via solid-phase epitaxy (SPE) points to methods to create low-defect-density thin films of the metastable cubic γ-Al₂O₃ polymorph. An amorphous Al₂O₃ thin film on a (0001) α-Al₂O₃ sapphire substrate initially transforms upon heating to form epitaxial γ-Al₂O₃, followed by a transformation to monoclinic θ-Al₂O₃, and eventually to α-Al₂O₃. Epitaxial γ-Al₂O₃ layers with low mosaic widths in X-ray rocking curves can be formed via SPE by crystallizing the γ-Al₂O₃ phase from amorphous Al₂O₃ and avoiding the microstructural inhomogeneity arising from the spatially inhomogeneous transformation to θ-Al₂O₃. A complementary molecular dynamics (MD) simulation indicates that the amorphous layer and γ-Al₂O₃ have similar Al coordination geometry, suggesting that γ-Al₂O₃ forms in part because it involves the minimum rearrangement of the initially amorphous configuration. The lattice parameters of γ-Al₂O₃ are consistent with a structure in which the majority of the Al vacancies in the spinel structure occupy sites with tetrahedral coordination, consistent with the MD results. The formation of Al vacancies at tetrahedral spinel sites in epitaxial γ-Al₂O₃ can minimize the epitaxial elastic deformation of γ-Al₂O₃ during crystallization.

Hydrothermal Synthesis of FeOOH and Fe2O3 Modified Self-Organizing Immobilized TiO2 Nanotubes for Photocatalytic Degradation of 1H-Benzotriazole

In this study, titanium dioxide nanotubes were prepared by electrochemical anodization technique and modified with an aqueous solution of FeCl3 using hydrothermal synthesis method to control the amount and distribution of iron compounds on the anatase TiO2 nanotubes. The objective was to synthesize immobilized FeOOH@TiO2 or Fe2O3@TiO2 photocatalysts designed for the flow-through reactor systems; to investigate thermal treatment effect on the photocatalytic efficiency; to determine appropriate Fe-compounds concentration for the maximum photocatalytic activity improvement, and to explain the mechanism responsible for the enhancement. The photocatalysts were tested for the degradation of 1H-benzotriazole in water under UV/solar light irradiation. Up to two times increase in the photocatalytic activity was obtained when TiO2 nanotubes were modified with 0.8 mM Fe. At higher Fe concentrations (8 mM and 80 mM), the photocatalytic activity of the given photocatalysts decreased. To confirm the formation of FeOOH or Fe2O3 species, and to clarify the mechanism of photoactivity, X-ray diffraction (XRD), Raman spectroscopy (RS), Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray spectroscopy (EDS) and UV-Vis spectroscopy were used.

Multifaceted aspects of charge transfer

Charge transfer and charge transport are by far among the most important processes for sustaining life on Earth and for making our modern ways of living possible. Involving multiple electron-transfer steps, photosynthesis and cellular respiration have been principally responsible for managing the energy flow in the biosphere of our planet since the Great Oxygen Event. It is impossible to imagine living organisms without charge transport mediated by ion channels, or electron and proton transfer mediated by redox enzymes. Concurrently, transfer and transport of electrons and holes drive the functionalities of electronic and photonic devices that are intricate for our lives. While fueling advances in engineering, charge-transfer science has established itself as an important independent field, originating from physical chemistry and chemical physics, focusing on paradigms from biology, and gaining momentum from solar-energy research. Here, we review the fundamental concepts of charge transfer, and outline its core role in a broad range of unrelated fields, such as medicine, environmental science, catalysis, electronics and photonics. The ubiquitous nature of dipoles, for example, sets demands on deepening the understanding of how localized electric fields affect charge transfer. Charge-transfer electrets, thus, prove important for advancing the field and for interfacing fundamental science with engineering. Synergy between the vastly different aspects of charge-transfer science sets the stage for the broad global impacts that the advances in this field have.

Titanium Dioxide Nanoparticles in Food and Personal Care Products-What Do We Know about Their Safety?

Titanium dioxide (TiO2) is a material of diverse applications commonly used as a food additive or cosmetic ingredient. Its prevalence in products of everyday use, especially in nanosize, raises concerns about safety. Current findings on the safety of titanium dioxide nanoparticles (TiO2 NPs) used as a food additive or a sunscreen compound are reviewed and systematized in this publication. Although some studies state that TiO2 NPs are not harmful to humans through ingestion or via dermal exposure, there is a considerable number of data that demonstrated their toxic effects in animal models. The final agreement on the safety of this nanomaterial has not yet been reached among researchers. There is also a lack of official, standardized guidelines for thorough characterization of TiO2 NPs in food and cosmetic products, provided by international authorities. Recent advances in the application of 'green-synthesized' TiO2 NPs, as well as comparative studies of the properties of 'biogenic' and 'traditional' nanoparticles, are presented. To conclude, perspectives and directions for further studies on the toxicity of TiO2 NPs are proposed.

Designing Photocatalytic Nanostructured Antibacterial Surfaces: Why Is Black Silica Better than Black Silicon?

The efficiency of photocatalytic antibacterial surfaces is limited by the absorption of light in it. Light absorption in photocatalytic surfaces can be enhanced by structuring it, leading to increased generation of reactive oxygen species (ROS) and hence improved bactericidal efficacy. A second, more passive methodology to kill bacteria involves the use of sharp nanostructures that mechanically disrupt the bacterial membrane. Recently, these two mechanisms were combined to form photoactive nanostructured surfaces with better antibacterial efficacy. However, the design rules for fabricating the optimal photoactive nanostructured surfaces have not been articulated. Here we show that for optimal performance it is very important to account for optoelectrical properties and geometry of the photoactive coating and the underlying pillar. We show that TiO₂-coated nanopillars arrays made of SiO₂, a material with a low extinction coefficient, have 73% higher bactericidal efficacies than those made of Si, a material with a high extinction coefficient. The finite element method (FEM) shows that despite the higher absorption in higher aspect ratio nanopillars, their performance is not always better. The concentration of bulk ROS saturates around 5 μm. For taller pillars, the improvement in surface ROS concentration is minimal due to the diffusion bottleneck. Simulation results corroborate with the experimentally observed methylene blue degradation and bacterial count measurements and provide an explanation of the observed phenomenon. The guidelines for designing these optically activated photocatalyst nanopillars can be extended to other photocatalytic material after adjusting for their respective properties.

Semiconductor Electrode Materials Applied in Photoelectrocatalytic Wastewater Treatment—an Overview

Industrial sources of environmental pollution generate huge amounts of industrial wastewater containing various recalcitrant organic and inorganic pollutants that are hazardous to the environment. On the other hand, industrial wastewater can be regarded as a prospective source of fresh water, energy, and valuable raw materials. Conventional sewage treatment systems are often not efficient enough for the complete degradation of pollutants and they are characterized by high energy consumption. Moreover, the chemical energy that is stored in the wastewater is wasted. A solution to these problems is an application of photoelectrocatalytic treatment methods, especially when they are coupled with energy generation. The paper presents a general overview of the semiconductor materials applied as photoelectrodes in the treatment of various pollutants. The fundamentals of photoelectrocatalytic reactions and the mechanism of pollutants treatment as well as parameters affecting the treatment process are presented. Examples of different semiconductor photoelectrodes that are applied in treatment processes are described in order to present the strengths and weaknesses of the photoelectrocatalytic treatment of industrial wastewater. This overview is an addition to the existing knowledge with a particular focus on the main experimental conditions employed in the photoelectrocatalytic degradation of various pollutants with the application of semiconductor photoelectrodes.

Improvement of Mechanical Properties and Self-Healing Efficiency by Ex-Situ Incorporation of TiO2 Nanoparticles to a Waterborne Poly(Urethane-Urea)

This research work was focused on the incorporation of TiO₂ nanoparticles into synthesized solvent-free waterborne poly(urethane-urea) (WPUU) based on hydrophilic poly(ethylene oxide) (PU0) in order to improve both the mechanical properties and self-healing effectiveness of a polymer matrix. The incorporation of TiO₂ nanoparticles resulted in a successful enhancement of the mechanical properties of nanocomposite films when compared to PU0. Simultaneously, the obtained nanocomposite films did not only maintain the self-healing ability of the PU0 film, measured by means of mechanical properties after successive cutting/recovery cycles, but they also showed a higher self-healing efficiency than the PU0 film. Moreover, the well-dispersed TiO₂ nanoparticles, visualized by atomic force microscopy (AFM), kept their conductive properties when embedded in the PU0 matrix, as was confirmed by electrostatic force microscopy (EFM). This research work described a simple and industrially appealing way to control the dispersion of commercially available TiO₂ nanoparticles in waterborne poly(urethane-urea) for the designing of inorganic/organic hybrid nanocomposites with enhanced mechanical properties and self-healing efficiency, in which TiO₂ nanoparticles preserved their conductive properties within the polymer matrix.

Electronic-reconstruction-enhanced hydrogen evolution catalysis in oxide polymorphs

Transition metal oxides exhibit strong structure-property correlations, which has been extensively investigated and utilized for achieving efficient oxygen electrocatalysts. However, high-performance oxide-based electrocatalysts for hydrogen evolution are quite limited, and the mechanism still remains elusive. Here we demonstrate the strong correlations between the electronic structure and hydrogen electrocatalytic activity within a single oxide system Ti2O3. Taking advantage of the epitaxial stabilization, the polymorphism of Ti2O3 is extended by stabilizing bulk-absent polymorphs in the film-form. Electronic reconstructions are realized in the bulk-absent Ti2O3 polymorphs, which are further correlated to their electrocatalytic activity. We identify that smaller charge-transfer energy leads to a substantial enhancement in the electrocatalytic efficiency with stronger hybridization of Ti 3d and O 2p orbitals. Our study highlights the importance of the electronic structures on the hydrogen evolution activity of oxide electrocatalysts, and also provides a strategy to achieve efficient oxide-based hydrogen electrocatalysts by epitaxial stabilization of bulk-absent polymorphs.

Electrostatic attraction of nanoobjects – a versatile strategy towards mesostructured transition metal compounds

This highlight summarizes current challenges of mesostructuring and focuses on the scope and the potential of the ELAN – (electrostatic attraction of nanoobjects) strategy in mesostructuring of transition metal compounds.

Non-classical growth of brookite nanorods

Under hydrothermal conditions, the formation of the brookite phase occurs due to the oriented attachment of anatase particles with subsequent recrystallization.