Novel magnetic g-C3N4/α-Fe2O3/Fe3O4 composite for the very effective visible-light-Fenton degradation of Orange II

Constructing α-Fe2O3/g-C3N4/SiO2 S-scheme-based heterostructure for photo-Fenton like degradation of rhodamine B dye in aqueous solution

This work successfully fabricated graphitic carbon nitride and magnetically recoverable α-Fe2O3/g-C3N4/SiO2 photo-Fenton catalysts using thermal polycondensation and in situ-simple precursor drying-calcination process, respectively, was examined for model synthetic rhodamine B (RhB) dye in the presence of H2O2 and acidic pH under simulated visible light irradiation. An aqueous suspension of the reaction mixture of dye-containing wastewater was fully degraded and reached 97% of photo-Fenton degradation efficiency within 120 min followed by the production of hydroxyl radical (•OH). The dominant hydroxyl radical position generated surface charge, electrostatic potential distribution, and average local ionization potential, which contributed to the complete mineralization of RhB dye, according to the density functional theory (DFT) calculations. HPLC and GCMS experiments were performed to examine the degradation fragments of RhB and draw a plausible mechanistic pathway which showed that RhB degradation generated a series of N-deethylated products, followed by a one-time ring-opening, which indicated that photosensitization induced a photocatalysis reaction mechanism.

Effects of iron oxide contents on photocatalytic performance of nanocomposites based on g-C3N4

α-Fe₂O₃/Fe₃O₄/g-C₃N₄ nanocomposites were prepared in-situ by solution combustion as magnetically separable photocatalysts using ferric nitrate as oxidant, glycine as organic fuel, and g-C₃N₄. The effects of various amounts of iron oxides, on the magnetic, optical, and photocatalytic properties were explored by different characterization methods. The magnetite (Fe₃O₄) phase as ferrimagnetic material disappeared with the increase in ferric nitrate contents, leading to the decrease of magnetic properties. The bandgap energy decreased from 2.8 to 1.6 eV with the increase of the hematite (α-Fe₂O₃) phase.The photocatalytic results showed that the type and amount of iron oxides had a significant effect on the decolorization of methylene blue, rhodamine B and methyl orange dyes under visible-light irradiation. The activity of the nanocomposite sample containing 37 wt. % iron oxides was more effective than that of the pristine g-C₃N₄ sample to photodegrade the methylene blue, rhodamine B and methyl orange, respectively. Moreover, the nanocomposites exhibited a higher photocurrent density than that of the pristine g-C₃N₄, mainly due to their lower charge recombination rate.

Iron oxide/hydroxide-nitrogen doped graphene-like visible-light active photocatalytic layers for antibiotics removal from wastewater

Hybrid layers consisting of Fe oxide, Fe hydroxide, and nitrogen doped graphene-like platelets have been synthesized by an eco-friendly laser-based method for photocatalytic applications. The complex composite layers show high photodecomposition efficiency towards degradation of antibiotic molecules under visible light irradiation. The photodecomposition efficiency was investigated as a function of relative concentrations of base materials, Fe oxide nanoparticles and graphene oxide platelets used for the preparation of target dispersions submitted to laser irradiation. Although reference pure Fe oxide/Fe hydroxide layers have high absorption in the visible spectral region, their photodecomposition efficiency is negligible under the same irradiation conditions. The high photocatalytic decomposition efficiency of the nanohybrid layer, up to 80% of the initial antibiotic molecules was assigned to synergistic effects between the constituent materials, efficient separation of the electron-hole pairs generated by visible light irradiation on the surface of Fe oxide and Fe hydroxide nanoparticles, in the presence of conducting graphene-like platelets. Nitrogen doped graphene-like platelets contribute also to the generation of electron-hole pairs under visible light irradiation, as demonstrated by the photocatalytic activity of pure, reference nitrogen doped graphene-like layers. The results also showed that adsorption processes do not contribute significantly to the removal of antibiotic molecules from the test solutions. The decrease of the antibiotic concentration under visible light irradiation was assigned primarily to photocatalytic decomposition mechanisms.

Chitosan functionalized bismuth oxychloride/zinc oxide nanocomposite for enhanced photocatalytic degradation of Congo red

The industrial discharge of dye pollutant contaminated wastewater is the major cause of water and soil pollution. Photocatalysis is a promising and green remediation technology, which has received widespread attention in the remediation of hazardous dyes from aqueous environment and convert them into harmless compounds. Herein, we report the synthesis of chitosan (CS) functionalized bismuth oxychloride/zinc oxide (BiOCl/ZnO) nanocomposite by a modified hydrothermal route. The physiochemical characterization revealed that the synthesized nanocomposite have crystalline, agglomerated spherical along with rod shaped morphology and size range from 35 to 160 nm. FTIR peaks at 825, 727, 662 and 622 cm^-1 specified the presence of BiO and ZnO bonds, whereas peak at 1635 cm^-1 revealed the existence of amine groups which confirms the presence of CS in the synthesized CS-BiOCl/ZnO nanocomposite. Catalytic property of synthesized nanocomposite was evaluated by the degradation of Congo red (CR) under UV-light irradiation. CR dye degradation percentage was found to be 93 % within a short period of 40 min by utilizing UV-light. Furthermore, reusability of CS-BiOCl/ZnO photocatalyst was also investigated, and it remained significant photocatalytic activity after three consecutive cycles. Hence, the results obtained in this study revealed that CS-BiOCl/ZnO nanocomposite can be used as a potential photocatalyst to remediate organic pollutants in various industries.

A comprehensive review on reactive oxygen species (ROS) in advanced oxidation processes (AOPs)

In this account, the reactive oxygen species (ROS) were comprehensively reviewed, which were based on electro-Fenton and photo-Fenton processes and correlative membrane filtration technology. Specifically, this review focuses on the fundamental principles and applications of advanced oxidation processes (AOPs) based on a series of nanomaterials, and we compare the pros and cons of each method and point out the perspective. Further, the emerging reviews regarding AOPs rarely emphasize the involved ROS and consider the convenience of radical classification and transformation mechanism, such a review is of paramount importance to be needed. Owing to the strong oxidation ability of radical (e.g., •OH, O₂^•-, and SO₄^•-) and non-radical (e.g., ¹O₂ and H₂O₂), these ROS would attack the organic contaminants of emerging concern, thus achieving the goal of environmental remediation. Hopefully, this review can offer detailed theoretical guidance for the researchers, and we believe it able to offer the frontier knowledge of AOPs for wastewater treatment plants (WWTPs).

Photoreduction of CO2 to CH4 over Efficient Z-Scheme γ-Fe2O3/g-C3N4 Composites

A series of composite γ-Fe₂O₃/g-C₃N₄ (denoted as xFeCN with x equal 5, 10, 15, and 20 of γ-Fe₂O₃ percentage in weight) was prepared by calcination and precipitation-impregnation methods. X-ray diffraction (XRD), Fourier transform infrared (FTIR), and X-ray photoelectron spectrometry (XPS) characterizations indicated the successful synthesis of Z-scheme FeCN composites. A red shift of the light absorption region was revealed by UV-vis diffuse reflectance spectroscopy (UV-DRS). In addition, photoluminescence spectroscopy (PL) spectra showed an interface interaction of two phases Fe₂O₃ and g-C₃N₄ in the synthesized composites that improved the charge transfer capacity. The photocatalytic activity of these materials was studied in the photoreduction of CO₂ with H₂O as the reductant in the gaseous phase. The composites exhibited excellent photoactivity compared to undoped g-C₃N₄. The CH₄ production rate over 10FeCN and 15FeCN composites (2.8 × 10^-2 and 2.9 × 10^-2 μmol h^-1 g^-1, respectively) was ca. 7 times higher than that over pristine g-C₃N₄ (0.4 × 10^-2 μmol h^-1 g^-1). This outstanding photocatalytic property of these composites was explained by the light absorption expansion and the prevention of photogenerated electron-hole pairs recombination due to its Z-scheme structure.

Recent advancements of g-C3N4-based magnetic photocatalysts towards the degradation of organic pollutants: a review

Heterogeneous photocatalysis premised on advanced oxidation processes has witnessed a broad application perspective, including water purification and environmental remediation. In particular, the graphitic carbon nitride (g-C₃N₄), an earth-abundant metal-free conjugated polymer, has acquired extensive application scope and interdisciplinary consideration owing to its outstanding structural and physicochemical properties. However, several issues such as the high recombination rate of the photo-generated electron-hole pairs, smaller specific surface area, and lower electrical conductivity curtail the catalytic efficacy of bulk g-C₃N₄. Another challenging task is separating the catalyst from the reaction medium, limiting their reusability and practical applications. Therefore, several methodologies are adopted strategically to tackle these issues. Attention is being paid, especially to the magnetic nanocomposites (NCs) based catalysts to enhance efficiency and proficient reusability property. This review summarizes the latest progress related to the design and development of magnetic g-C₃N₄-based NCs and their utilization in photocatalytic systems. The usefulness of the semiconductor heterojunctions on the catalytic activity, working mechanism, and degradation of pollutants are discussed in detail. The major challenges and prospects of using magnetic g-C₃N₄-based NCs for photocatalytic applications are highlighted in this report.

Acclimatization studies for degradation of Acid Red 3BN dye and its treatment in moving bed biofilm reactor

In this study, acclimatization of microorganisms for the degradation of Acid Red 3BN dye bearing water (AR3BNDW) using activated sludge was performed in a cylindrical aerobic reactor. The initial value of chemical oxygen demand (COD), dye, and mixed liquor suspended solids (MLSS) of activated sludge were evaluated as 870.5, 80.6 and 1200 mg/L The experiments were performed at ambient temperature (25–35 °C) and the stabilization was achieved at 15 d. Maximum reduction of chemical oxygen demand (COD) and color were observed to be 94.2%, and 91% after 15 d of acclimatization. After completion of acclimatization process, degradation of dye was studied in moving bed biofilm reactor (MBBR). In the process, 38, 50, 68 and 76% color reduction were achieved with polymer carrier fill ratio (FR) of 40, 50, 60 and 70%, respectively in 24 h. For effluent flow rate of 180, 240, 300 and 360 mL/h, respectively, the dye reductions of 76, 60, 48 and 36% and COD reductions of 72, 58, 46 and 34% were achieved in 24 h

Controllable One-Step Synthesis of Mixed-Phase TiO2 Nanocrystals with Equivalent Anatase/Rutile Ratio for Enhanced Photocatalytic Performance

In this study, the novel mixed-phase TiO2 nanocrystals (s-TiO2) with nearly equivalent anatase/rutile ratio were fabricated in the reagent of sec-butanol at the relatively low temperature of 80 °C by using a facile one-step condensing reflux method. The photocatalytic water splitting hydrogen production performance of s-TiO2 nanocrystals is close to that of commercial TiO2 (P25), and its photocatalytic degradation performance is about four times that of P25. The energy-level staggered interfaces and surface bridged hydroxyl groups significantly increased due to the anatase/rutile mixed-phase crystal structure and high specific surface area, which might generate the synergistic effect for the improvement of photocatalytic degradation.

Fe3O4@C Nanoparticles Synthesized by In Situ Solid-Phase Method for Removal of Methylene Blue

Fe3O4@C nanoparticles were prepared by an in situ, solid-phase reaction, without any precursor, using FeSO4, FeS2, and PVP K30 as raw materials. The nanoparticles were utilized to decolorize high concentrations methylene blue (MB). The results indicated that the maximum adsorption capacity of the Fe3O4@C nanoparticles was 18.52 mg/g, and that the adsorption process was exothermic. Additionally, by employing H2O2 as the initiator of a Fenton-like reaction, the removal efficiency of 100 mg/L MB reached ~99% with Fe3O4@C nanoparticles, while that of MB was only ~34% using pure Fe3O4 nanoparticles. The mechanism of H2O2 activated on the Fe3O4@C nanoparticles and the possible degradation pathways of MB are discussed. The Fe3O4@C nanoparticles retained high catalytic activity after five usage cycles. This work describes a facile method for producing Fe3O4@C nanoparticles with excellent catalytic reactivity, and therefore, represents a promising approach for the industrial production of Fe3O4@C nanoparticles for the treatment of high concentrations of dyes in wastewater.

Fabrication, application, optimization and working mechanism of Fe2O3 and its composites for contaminants elimination from wastewater

Fe₂O₃ and its composites have been extensively investigated and employed for the remediation of contaminated water with the characteristics of low cost, outstanding chemical stability, high efficiency of visible light utilization, excellent magnetic ability and abundant active sites for adsorption and degradation. In this review, the potentials of Fe₂O₃ in water remediation were discussed and summarized in detail. Firstly, various synthesis methods of Fe₂O₃ and its composites were reviewed and compared. Based on the structures and characteristics of the obtained materials, their applications and related mechanisms in pollutants removal were surveyed and discussed. Furthermore, several strategies for optimizing the remediation processes, including dispersion, immobilization, nano/micromotor construction and simultaneous decontamination, were also highlighted and discussed. Finally, recommendations for further work in the development of novel Fe₂O₃-related materials and its practical applications were proposed.

A low-cost solvent-free method to synthesize α-Fe2O3 nanoparticles with applications to degrade methyl orange in photo-fenton system

Hematite nanoparticles (α-Fe₂O₃ NPs) were successfully synthesized by a low-cost solvent-free reaction using Ferrous sulfate waste (FeSO₄·7H₂O) and pyrite (FeS₂) as raw materials and employed for the decolorization of Methyl Orange by the photo-Fenton system. The properties of α-Fe₂O₃ NPs before and after photo-Fenton reaction were characterized by X-ray powder diffraction (XRD), Field emission scanning electron microscopy (FESEM), Fourier transform infrared (FT-IR) spectrum and X-ray photoelectron spectroscopy (XPS), and the optical properties of α-Fe₂O₃ NPs were analyzed by UV-vis diffuse reflectance spectra (UV-vis DRS) and Photoluminescence (PL) spectra. The analytic results showed that the as-formed samples having an average diameter of ~50 nm exhibit pure phase hematite with sphere structure. Besides, little differences were found by comparing the characterization data of the particles before and after the photo-Fenton reaction, indicating that the photo-Fenton reaction was carried out in solution rather than on the surface of α-Fe₂O₃ NPs. A 2⁴ central composite design (CCD) coupled with response surface methodology (RSM) was applied to evaluate and optimize the important variables. A significant quadratic model (P-value<0.0001, R² = 0.9664) was derived using an analysis of variance (ANOVA), which was adequate to perform the process variables optimization. The optimal process conditions were performed to be 395 nm of the light wavelength, pH 3.0, 5 mmol/L H₂O₂ and 1 g/L α-Fe₂O₃, and the decolorization efficiency of methyl orange was 99.55% at 4 min.

Bifunctional iron-modified graphitic carbon nitride (g-C3N4) for simultaneous oxidation and adsorption of arsenic

Iron-modified graphitic carbon nitride (FG materials) was prepared through a simple and cost-effective method using iron oxide and melamine to achieve simultaneous oxidation and adsorption of arsenic. We hypothesized that graphitic carbon nitride oxidizes As(III) to As(V) under light irradiation, and the converted As(V) is adsorbed by the amorphous iron phase on FG materials. FG materials were characterized by X-ray diffraction, Fourier transform infrared spectra, field-emission scanning electron microscopy, specific surface area, ultraviolet-visible light spectroscopy, photoluminescence, and X-ray photoelectron spectroscopy. As(III) was efficiently transformed to As(V) due to the photocatalytic-oxidation ability of graphic carbon nitride under visible and UV light irradiation, the oxidized As(V) was adsorbed by the amorphous iron phases, and As species were removed from the system. The removal efficiency of As(III) decreased from 50%, 41%, and 33% under UV light, visible light and dark, respectively. FG materials exhibited the photocatalytic-oxidation ability and adsorption capacity, and a synergistic effect was observed between graphitic carbon nitride and iron oxide. Removal of As can be achieved even under visible light, confirming the field applicability of low-cost FG materials.