Methanol as a co-substrate with CO2 enhances butyrate production in microbial electrosynthesis

Methanol is a promising feedstock for the bio-based economy as it can be derived from organic waste streams or produced electrochemically from CO2. Acetate production from CO2 in microbial electrosynthesis (MES) has been widely studied, while more valuable compounds such as butyrate are currently attracting attention. In this study, methanol was used as a co-substrate with CO2 to enhance butyrate production in MES. Feeding with CO2 and methanol resulted in the highest butyrate production rates and titres of 0.36 ± 0.01 g L-1 d-1 and 8.6 ± 0.2 g L-1, respectively, outperforming reactors with only CO2 feeding (0.20 ± 0.03 g L-1 d-1 and 5.2 ± 0.1 g L-1, respectively). Methanol acted as electron donor and as carbon source, both of which contributed ca. 50% of the carbon in the products. Eubacterium was the dominant genus with 52.6 ± 2.5% relative abundance. Thus, we demonstrate attractive route for the use of the C1 substrates, CO2 and methanol, to produce mainly butyrate. KEY POINTS: • Butyrate was the main product from methanol and CO2 in MES • Methanol acted as both carbon and electron source in MES • Eubacterium dominating microbial culture was enriched in MES.

Enhancing microbial CO2 electrocatalysis for multicarbon reduction in a wet amine-based catholyte

Microbial CO2 electroreduction (mCO2ER) offers a promising approach for producing high-value multicarbon reductants from CO2 by combining CO2 fixing microorganisms with conducting materials (i. e., cathodes). However, the solubility and availability of CO2 in an aqueous electrolyte pose significant limitations in this system. This study demonstrates the efficient production of long-chain multicarbon reductants, specifically carotenoids (~C40), within a wet amine-based catholyte medium during mCO2ER. Optimizing the concentration of the biocompatible CO2 absorbent, monoethanolamine (MEA), led to enhanced CO2 fixation in the electroautotroph bacteria. Molecular biological analyses revealed that MEA in the catholyte medium redirected the carbon flux towards carotenoid biosynthesis during mCO2ER. The faradaic efficiency of mCO2ER with MEA for carotenoid production was 4.5-fold higher than that of the control condition. These results suggest the mass transport bottleneck in bioelectrochemical systems could be effectively addressed by MEA-assissted mCO2ER, enabling highly efficient production of valuable products from CO2.

A novel electrolytic gas lift reactor for efficient microbial electrosynthesis of acetate from carbon dioxide

The low current density impedes the practical application of microbial electrosynthesis for CO2 fixation. Engineering the reactor design is an effective way to increase the current density, especially for H2-mediated microbial electrosynthesis reactors. The electrolytic bubble column microbial electrosynthesis reactor has shown great potential for scaling up, but the mixing and gas mass transfer still need to be enhanced to further increase the current density. Here, we introduced an inner draft tube to the bubble column to tackle the problem. The addition of draft tube resulted in a 76.6% increase in the volumetric mass transfer coefficient (kLa) of H2, a 40% increase in the maximum current density (337 A/m2) and a 72% increase in average acetate production rate (3.1 g/L/d). The computational fluid dynamics simulations showed that the addition of draft tube enhanced mixing efficiency by enabling a more ordered cyclic flow pattern and a more uniform gas/liquid distribution. These results indicate that the electro-bubble column reactor with draft tube holds great potential for industrial implementation.

Copper foam supported g-C3N4-metal-organic framework bacteria biohybrid cathode catalyst for CO2 reduction in microbial electrosynthesis

Microbial electrosynthesis (MES) presents a versatile approach for efficiently converting carbon dioxide (CO2) into valuable products. However, poor electron uptake by the microorganisms from the cathode severely limits the performance of MES. In this study, a graphitic carbon nitride (g-C3N4)-metal-organic framework (MOF) i.e. HKUST-1 composite was newly designed and synthesized as the cathode catalyst for MES operations. The physiochemical analysis such as X-ray diffraction, scanning electron microscopy (SEM), and X-ray fluorescence spectroscopy showed the successful synthesis of g-C3N4-HKUST-1, whereas electrochemical assessments revealed its enhanced kinetics for redox reactions. The g-C3N4-HKUST-1 composite displayed excellent biocompatibility to develop electroactive biohybrid catalyst for CO2 reduction. The MES with g-C3N4-HKUST-1 biohybrid demonstrated an excellent current uptake of 1.7 mA/cm2, which was noted higher as compared to the MES using g-C3N4 biohybrid (1.1 mA/cm2). Both the MESs could convert CO2 into acetic and isobutyric acid with a significantly higher yield of 0.46 g/L.d and 0.14 g/L.d respectively in MES with g-C3N4-HKUST-1 biohybrid and 0.27 g/L.d and 0.06 g/L.d, respectively in MES with g-C3N4 biohybrid. The findings of this study suggest that g-C3N4-HKUST-1 is a highly efficient catalytic material for biocathodes in MESs to significantly enhance the CO2 conversion.

Carbon dioxide reduction to high-value chemicals in microbial electrosynthesis system: Biological conversion and regulation strategies

Large emissions of atmospheric carbon dioxide (CO2) are causing climatic and environmental problems. It is crucial to capture and utilize the excess CO2 through diverse methods, among which the microbial electrosynthesis (MES) system has become an attractive and promising technology to mitigate greenhouse effects while reducing CO2 to high-value chemicals. However, the biological conversion and metabolic pathways through microbial catalysis have not been clearly elucidated. This review first introduces the main acetogenic bacteria for CO2 reduction and extracellular electron transfer mechanisms in MES. It then intensively analyzes the CO2 bioconversion pathways and carbon chain elongation processes in MES, together with energy supply and utilization. The factors affecting MES performance, including physical, chemical, and biological aspects, are summarized, and the strategies to promote and regulate bioconversion in MES are explored. Finally, challenges and perspectives concerning microbial electrochemical carbon sequestration are proposed, and suggestions for future research are also provided. This review provides theoretical foundation and technical support for further development and industrial application of MES for CO2 reduction.

Perspectives for Using CO2 as a Feedstock for Biomanufacturing of Fuels and Chemicals

Microbial cell factories offer an eco-friendly alternative for transforming raw materials into commercially valuable products because of their reduced carbon impact compared to conventional industrial procedures. These systems often depend on lignocellulosic feedstocks, mainly pentose and hexose sugars. One major hurdle when utilizing these sugars, especially glucose, is balancing carbon allocation to satisfy energy, cofactor, and other essential component needs for cellular proliferation while maintaining a robust yield. Nearly half or more of this carbon is inevitably lost as CO2 during the biosynthesis of regular metabolic necessities. This loss lowers the production yield and compromises the benefit of reducing greenhouse gas emissions-a fundamental advantage of biomanufacturing. This review paper posits the perspectives of using CO2 from the atmosphere, industrial wastes, or the exhausted gases generated in microbial fermentation as a feedstock for biomanufacturing. Achieving the carbon-neutral or -negative goals is addressed under two main strategies. The one-step strategy uses novel metabolic pathway design and engineering approaches to directly fix the CO2 toward the synthesis of the desired products. Due to the limitation of the yield and efficiency in one-step fixation, the two-step strategy aims to integrate firstly the electrochemical conversion of the exhausted CO2 into C1/C2 products such as formate, methanol, acetate, and ethanol, and a second fermentation process to utilize the CO2-derived C1/C2 chemicals or co-utilize C5/C6 sugars and C1/C2 chemicals for product formation. The potential and challenges of using CO2 as a feedstock for future biomanufacturing of fuels and chemicals are also discussed.

Role of microbial electrosynthesis system in CO2 capture and conversion: a recent advancement toward cathode development

Microbial electrosynthesis (MES) is an emerging electrochemical technology currently being researched as a CO₂ sequestration method to address climate change. MES can convert CO₂ from pollution or waste materials into various carbon compounds with low energy requirements using electrogenic microbes as biocatalysts. However, the critical component in this technology, the cathode, still needs to perform more effectively than other conventional CO₂ reduction methods because of poor selectivity, complex metabolism pathways of microbes, and high material cost. These characteristics lead to the weak interactions of microbes and cathode electrocatalytic activities. These approaches range from cathode modification using conventional engineering approaches to new fabrication methods. Aside from cathode development, the operating procedure also plays a critical function and strategy to optimize electrosynthesis production in reducing operating costs, such as hybridization and integration of MES. If this technology could be realized, it would offer a new way to utilize excess CO₂ from industries and generate profitable commodities in the future to replace fossil fuel-derived products. In recent years, several potential approaches have been tested and studied to boost the capabilities of CO₂-reducing bio-cathodes regarding surface morphology, current density, and biocompatibility, which would be further elaborated. This compilation aims to showcase that the achievements of MES have significantly improved and the future direction this is going with some recommendations. Highlights - MES approach in carbon sequestration using the biotic component.- The role of microbes as biocatalysts in MES and their metabolic pathways are discussed.- Methods and materials used to modify biocathode for enhancing CO₂ reduction are presented.

Bioelectrochemical systems (BESs) for agro-food waste and wastewater treatment, and sustainable bioenergy-A review

Producing food by farming and subsequent food manufacturing are central to the world's food supply, accounting for more than half of all production. Production is, however, closely related to the creation of large amounts of organic wastes or byproducts (agro-food waste or wastewater) that negatively impact the environment and the climate. Global climate change mitigation is an urgent need that necessitates sustainable development. For that purpose, proper agro-food waste and wastewater management are essential, not only for waste reduction but also for resource optimization. To achieve sustainability in food production, biotechnology is considered as key factor since its continuous development and broad implementation will potentially benefit ecosystems by turning polluting waste into biodegradable materials; this will become more feasible and common as environmentally friendly industrial processes improve. Bioelectrochemical systems are a revitalized, promising biotechnology integrating microorganisms (or enzymes) with multifaceted applications. The technology can efficiently reduce waste and wastewater while recovering energy and chemicals, taking advantage of their biological elements' specific redox processes. In this review, a consolidated description of agro-food waste and wastewater and its remediation possibilities, using different bioelectrochemical-based systems is presented and discussed together with a critical view of the current and future potential applications.

Metatranscriptomic insights into the microbial electrosynthesis of acetate by Fe2+/Ni2+ addition

As important components of enzymes and coenzymes involved in energy transfer and Wood-Ljungdahl (WL) pathways, Fe²⁺ and Ni²⁺ supplementation may promote the acetate synthesis through CO₂ reduction by the microbial electrosynthesis (MES). However, the effect of Fe²⁺ and Ni²⁺ addition on acetate production in MES and corresponding microbial mechanisms have not been fully studied. Therefore, this study investigated the effect of Fe²⁺ and Ni²⁺ addition on acetate production in MES, and explored the underlying microbial mechanism from the metatranscriptomic perspective. Both Fe²⁺ and Ni²⁺ addition enhanced acetate production of the MES, which was 76.9% and 110.9% higher than that of control, respectively. Little effect on phylum level and small changes in genus-level microbial composition was caused by Fe²⁺ and Ni²⁺ addition. Gene expression of 'Energy metabolism', especially in 'Carbon fixation pathways in prokaryotes' was up-regulated by Fe²⁺ and Ni²⁺ addition. Hydrogenase was found as an important energy transfer mediator for CO₂ reduction and acetate synthesis. Fe²⁺ addition and Ni²⁺ addition respectively enhanced the expression of methyl branch and carboxyl branch of the WL pathway, and thus promoted acetate production. The study provided a metatranscriptomic insight into the effect of Fe²⁺ and Ni²⁺ on acetate production by CO₂ reduction in MES.

Bioelectrocatalysis for CO2 reduction: recent advances and challenges to develop a sustainable system for CO2 utilization

Activation and turning CO₂ into value added products is a promising orientation to address environmental issues caused by CO₂ emission. Currently, electrocatalysis has a potent well-established role for CO₂ reduction with fast electron transfer rate; but it is challenged by the poor selectivity and low faradic efficiency. On the other side, biocatalysis, including enzymes and microbes, has been also employed for CO₂ conversion to target C_n products with remarkably high selectivity; however, low solubility of CO₂ in the liquid reaction phase seriously affects the catalytic efficiency. Therefore, a new synergistic role in bioelectrocatalysis for CO₂ reduction is emerging thanks to its outstanding selectivity, high faradic efficiency, and desirable valuable C_n products under mild condition that are surveyed in this review. Herein, we comprehensively discuss the results already obtained for the integration craft of enzymatic-electrocatalysis and microbial-electrocatalysis technologies. In addition, the intrinsic nature of the combination is highly dependent on the electron transfer. Thus, both direct electron transfer and mediated electron transfer routes are modeled and concluded. We also explore the biocompatibility and synergistic effects of electrode materials, which emerge in combination with tuned enzymes and microbes to improve catalytic performance. The system by integrating solar energy driven photo-electrochemical technics with bio-catalysis is further discussed. We finally highlight the significant findings and perspectives that have provided strong foundations for the remarkable development of green and sustainable bioelectrocatalysis for CO₂ reduction, and that offer a blueprint for C_n valuable products originate from CO₂ under efficient and mild conditions.

Enhancement of acetate production in hydrogen-mediated microbial electrosynthesis reactors by addition of silica nanoparticles

Microbial electrosynthesis (MES) is a promising technology for CO2 fixation and electrical energy storage. Currently, the low current density of MES limits its practical application. The H2-mediated and non-biofilm-driven MES could work under higher current density, but it is difficult to achieve high coulombic efficiency (CE) due to low H2 solubility and poor mass transfer. Here, we proposed to enhance the hydrogen mass transfer by adding silica nanoparticles to the reactor. At pH 7, 35 ℃ and 39 A·m- 2 current density, with the addition of 0.3wt% silica nanoparticles, the volumetric mass transfer coefficient (kLa) of H2 in the reactor increased by 32.4% (from 0.37 h- 1 to 0.49 h- 1), thereby increasing the acetate production rate and CE of the reactor by 69.8% and 69.2%, respectively. The titer of acetate in the reactor with silica nanoparticles (18.5 g·L- 1) was 56.9% higher than that of the reactor without silica nanoparticles (11.8 g·L- 1). Moreover, the average acetate production rate of the reactor with silica nanoparticles was up to 2.14 g·L- 1·d- 1 in the stable increment phase, which was much higher than the other reported reactors. These results demonstrated that the addition of silica nanoparticles is an effective approach to enhancing the performance of H2-mediated MES reactors.

Product spectrum analysis and microbial insights of medium-chain fatty acids production from waste biomass during liquor fermentation process: Effects of substrate concentrations and fermentation modes

Substrate toxicity would limit the upgrading of waste biomass to medium-chain fatty acids (MCFAs). In this work, two fermentation modes of electro-fermentation (EF) and traditional fermentation (TF) with different concentration of liquor fermentation waste (20%, 40%, 60%) were used for MCFAs production as well as mechanism investigation. The highest caproate (4.04 g/L) and butyrate (13.96 g/L) concentrations were obtained by EF at 40% substrate concentration. TF experiments showed that the substrate concentration above 40% severely inhibited ethanol oxidation and products formation. Compared with TF mode, the total substrates consumption and product yields under EF mode were significantly increased by 2.6%-43.5% and 54.0%-83.0%, respectively. Microbial analysis indicated that EF effectively alleviated substrate toxicity and enriched chain elongation bacteria, particularly Clostridium_sensu_stricto 12, thereby promoting ethanol oxidation and products formation. Caproiciproducens tolerated high-concentration substrates to ensure normal lactate metabolism. This study provides a new way to produce MCFAs from high concentration wastewater.

Renewable Power and Heat for the Decarbonisation of Energy-Intensive Industries

The present review provides a catalogue of relevant renewable energy (RE) technologies currently available (regarding the 2030 scope) and to be available in the transition towards 2050 for the decarbonisation of Energy Intensive Industries (EIIs). RE solutions have been classified into technologies based on the use of renewable electricity and those used to produce heat for multiple industrial processes. Electrification will be key thanks to the gradual decrease in renewable power prices and the conversion of natural-gas-dependent processes. Industrial processes that are not eligible for electrification will still need a form of renewable heat. Among them, the following have been identified: concentrating solar power, heat pumps, and geothermal energy. These can supply a broad range of needed temperatures. Biomass will be a key element not only in the decarbonisation of conventional combustion systems but also as a biofuel feedstock. Biomethane and green hydrogen are considered essential. Biomethane can allow a straightforward transition from fossil-based natural gas to renewable gas. Green hydrogen production technologies will be required to increase their maturity and availability in Europe (EU). EIIs’ decarbonisation will occur through the progressive use of an energy mix that allows EU industrial sectors to remain competitive on a global scale. Each industrial sector will require specific renewable energy solutions, especially the top greenhouse gas-emitting industries. This analysis has also been conceived as a starting point for discussions with potential decision makers to facilitate a more rapid transition of EIIs to full decarbonisation.

Enhancing the selective synthesis of butyrate in microbial electrosynthesis system by gas diffusion membrane composite biocathode

The reduction of carbon dioxide (CO₂) to high value-added multi-carbon compounds at the cathode is an emerging application of microbial electrosynthesis system (MES). In this study, a composite cathode consisting of hollow fiber membrane (HFM) and the carbon felt is designed to enhance the CO₂ mass transfer of the cathode. The result shows that the main products are acetate and butyrate without other substances. The electrochemical performance of the electrode is significantly improved after biofilm becomes matures. The composite cathode significantly reduces the "threshold" for the synthesis of butyrate. Moreover, CO₂ is dissolved and protons are consumed by synthesizing volatile fatty acids (VFAs) to maintain a stable pH inside the composite electrode. The synthesis mechanism of butyrate is that CO₂ is converted sequentially into acetate and butyrate. The microenvironment of the composite electrode enriches Firmicute. This composite electrode provides a novel strategy for regulating the microenvironment.

Enhanced CO2 electroconversion of Rhodobacter sphaeroides by cobalt-phosphate complex assisted water oxidation

CO₂ can be a next generation feedstock for electricity-driven bioproduction due to its abundance and availability. Microbial electrosynthesis (MES), a promising technique for CO₂ electroconversion, provides an attractive route for the production of valuable products from CO₂, but issues surrounding efficiency and reasonable productivity should be resolved. Improving the anode performance for water oxidation under neutral pH is one of the most important aspects to advance current MES. Here, we introduce cobalt-phosphate (Co-Pi) assisted water oxidation at the counter electrode (i.e., anode) to upgrade the MES performance at pH 7.0. We show that CO₂ can be converted by photochemoautotrophic bacterium, Rhodobacter sphaeroides into organic acids and carotenoids in the MES reactor. Planktonic cells of R. sphareroides in the Co-Pi anode equipped MES reactor was ca. 1.5-fold higher than in the control condition (w/o Co-Pi). The faradaic efficiency of the Co-Pi anode equipped MES reactor was remarkably higher (58.3%) than that of the bare anode (27.8%). While the system can improve the CO₂ electroconversion nonetheless there are some further optimizations are necessary.

Regulation and augmentation of anaerobic digestion processes via the use of bioelectrochemical systems

Anaerobic digestion (AD) is a biological process that can be used to treat a wide range of carbon-rich wastes and producerenewable, green energy. To maximize energy recovery from various resources while controlling inhibitory chemicals, notwithstanding AD's efficiency, many limitations must be addressed. As a result, bioelectrochemical systems (BESs) have emerged as a hybrid technology, extensively studied to remediate AD inhibitory chemicals, increase AD operating efficacy, and make the process economically viable via integration approaches. Biogas and residual intermediatory metabolites such as volatile fatty acids are upgraded to value-added chemicals and fuels with the help of the BES as a pre-treatment step, within AD or after the AD process. It may also be used directly to generate power. To overcome the constraints of AD in lab-scale applications, this article summarizes BES technology and operations and endorses ways to scale up BES-AD systems in the future.

Application of bioelectrochemical systems to regulate and accelerate the anaerobic digestion processes

Anaerobic digestion (AD) serves as a potential bioconversion process to treat various organic wastes/wastewaters, including sewage sludge, and generate renewable green energy. Despite its efficiency, AD has several limitations that need to be overcome to achieve maximum energy recovery from organic materials while regulating inhibitory substances. Hence, bioelectrochemical systems (BESs) have been widely investigated to treat inhibitory compounds including ammonia in AD processes and improve the AD operational efficiency, stability, and economic viability with various integrations. The BES operations as a pretreatment process, inside AD or after the AD process aids in the upgradation of biogas (CO₂ to methane) and residual volatile fatty acids (VFAs) to valuable chemicals and fuels (alcohols) and even directly to electricity generation. This review presents a comprehensive summary of BES technologies and operations for overcoming the limitations of AD in lab-scale applications and suggests upscaling and future opportunities for BES-AD systems.

Valorisation of CO2 into Value-Added Products via Microbial Electrosynthesis (MES) and Electro-Fermentation Technology

Microbial electrocatalysis reckons on microbes as catalysts for reactions occurring at electrodes. Microbial fuel cells and microbial electrolysis cells are well-known in this context; both prefer the oxidation of organic and inorganic matter for producing electricity. Notably, the synthesis of high energy-density chemicals (fuels) or their precursors by microorganisms using bio-cathode to yield electrical energy is called Microbial Electrosynthesis (MES), giving an exceptionally appealing novel way for producing beneficial products from electricity and wastewater. This review accentuates the concept, importance and opportunities of MES, as an emerging discipline at the nexus of microbiology and electrochemistry. Production of organic compounds from MES is considered as an effective technique for the generation of various beneficial reduced end-products (like acetate and butyrate) as well as in reducing the load of CO2 from the atmosphere to mitigate the harmful effect of greenhouse gases in global warming. Although MES is still an emerging technology, this method is not thoroughly known. The authors have focused on MES, as it is the next transformative, viable alternative technology to decrease the repercussions of surplus carbon dioxide in the environment along with conserving energy.

Mixed-culture biocathodes for acetate production from CO2 reduction in the microbial electrosynthesis: Impact of temperature

The temperature effect on bioelectrochemical reduction of CO₂ to acetate with a mixed-culture biocathode in the microbial electrosynthesis was explored. The results showed that maximum acetate amount of 525.84 ± 1.55 mg L^-1 and fastest acetate formation of 49.21 ± 0.49 mg L^-1 d^-1 were obtained under mesophilic conditions. Electron recovery efficiency for CO₂ reduction to acetate ranged from 14.50 ± 2.20% to 64.86 ± 2.20%, due to propionate, butyrate and H₂ generation. Mesophilic conditions were demonstrated to be more favorable for biofilm formation on the cathode, resulting in a stable and dense biofilm. At phylum level, the relative abundance of Bacteroidetes phylum in the biofilm remarkably increased under mesophilic conditions, compared with that at psychrophilic and thermophilic conditions. At genus level, the Clostridium, Treponema, Acidithiobacillus, Acetobacterium and Acetoanaerobium were found to be dominated genera in the biofilm under mesophilic conditions, while genera diversity decreased under psychrophilic and thermophilic conditions.

Enhanced product selectivity in the microbial electrosynthesis of butyrate using a nickel ferrite-coated biocathode

Microbial electrosynthesis (MES) is a potential sustainable biotechnology for the efficient conversion of carbon dioxide/bicarbonate into useful chemical commodities. To date, acetate has been the main MES product; selective electrosynthesis to produce other multi-carbon molecules, which have a higher commercial value, remains a major challenge. In this study, the conventional carbon felt (CF) was modified with inexpensive nickel ferrite (NiFe₂O₄@CF) to realize enhanced butyrate production owing to the advantages of improved electrical conductivity, charge transfer efficiency, and microbial-electrode interactions with the selective microbial enrichment. Experimental results show that the modified electrode yielded 1.2 times the butyrate production and 2.7 times the cathodic current production of the CF cathode; product selectivity was greatly improved (from 37% to 95%) in comparison with CF. Microbial community analyses suggest that selective microbial enrichment was promoted as Proteobacteria and Thermotogae (butyrate-producing phyla) were dominant in the NiFe₂O₄@CF biofilm (~78%). These results demonstrate that electrode modification with NiFe₂O₄ can help realize greater selective carboxylate production with improved MES performance. Hence, this technology is expected to be greatly useful in future reactor designs for scaled-up technologies.

An external magnetic field moderating Cr(VI) stress for simultaneous enhanced acetate production and Cr(VI) removal in microbial electrosynthesis system

A stressful heavy metal circumstance disfavors production of acetate from bicarbonate reduction in the biocathode of microbial electrosynthesis system (MES) with simultaneous function of heavy metal removal/recovery. It is of great interest to explore effective approaches to moderate the heavy metal stress with achievement of simultaneous enhanced acetate production and heavy metal removal in MES. Herein, a magnetic field strength of 100 mT was successfully employed to moderate Cr(VI) stress, achieving simultaneous production of acetate at a rate of 1.48 ± 0.01 mg/L/h and Cr(VI) removal at a rate of 1.67-2.42 mg/L/h in the Serratia marcescens Q1 catalyzed cathode of MES under periodical addition of bicarbonate and Cr(VI), 1.35-fold (acetate production) and 1.34-1.46 times (Cr(VI) removal) of those in the controls in the absence of magnetic field. This simultaneous efficient acetate production and Cr(VI) removal was regulated by the magnetic field and the stressful Cr(VI), which induced the S. marcescens to physiologically release additive amounts of extracellular polymeric substances with a compositional diversity and containing the electrochemically active c-type cytochromes to facilitate extracellular electron transfer. This study confirmed the importance of magnetic field in developing the S. marcescens catalytic activity for moderating Cr(VI) stress, and thus provided a feasible approach for simultaneous efficient acetate production and Cr(VI) removal/recovery in MES, from waters contaminated with Cr(VI).

Review on the production of medium and small chain fatty acids through waste valorization and CO2 fixation

The developing approaches in the recovery of resources from biowastes for the production of renewable value-added products and fuels, using microbial cultures as bio-catalyst have now became promising aspect. In the path of anaerobic digestion, the microorganisms are assisting transformation of a complex organic feedstock/waste to biomass and biogas. This potentiality consequently leads to the production of intermediate precursors of renewable value-added products. Particularly, a set of anaerobic pathways in the fermentation process, yields small-chain fatty acids (SCFA), and medium-chain fatty acids (MCFA) via chain elongation pathways from waste valorization and CO₂ fixation. This review focuses on the production of SCFA and MCFA from CO₂, synthetic substrates and waste materials. Moreover, the review introduces the metabolic engineering of Escherichia coli and Saccharomyces cerevisiae for SCFAs/MCFAs production. Furtherly, it concludes that future critical research might target progress of this promising approach as a valorization of complex organic wastes.

Perovskite-Based Multifunctional Cathode with Simultaneous Supplementation of Substrates and Electrons for Enhanced Microbial Electrosynthesis of Organics

Microbial electrosynthesis (MES) is an electricity-driven technology for the microbial reduction of CO₂ to organic commodities. However, the limited solubility of CO₂ in a solution and the inefficient electron transfer make it impossible for microorganisms to obtain an efficient surface for catalytic interaction, thus resulting in the low efficiency of MES. To address this, we introduce a multifunctional perovskite-based cathode material Pr_0.5(Ba_0.5Sr_0.5)_0.5Co_0.8Fe_0.2O_3-δ-carbon felt (Pr_0.5BSCF-CF), which provides a simultaneously significant increase in CO₂ absorption and hydrogen production. As a result, the volumetric acetate production rate of MES obtained by Pr_0.5BSCF-CF is 0.24 ± 0.01 g L^-1 day^-1, and it achieves a maximum acetate titer of 13.74 ± 0.20 g L^-1 within 70 days. An adequate supply of CO₂ and H₂ also provides a sufficient amount of substrates and energy for the self-replication of the biocatalysts in the MES reactor. This effect not only increases the amount of biocatalysts but also optimizes the functions of the biocatalysts; the above benefits further improve the production efficiency of the MES system. This strategy demonstrates that the development of perovskite-based multifunctional cathodes with a simultaneous supplementation of substrates and electrons is a promising approach toward improving the MES efficiency.

Microbial electrosynthesis feasibility evaluation at high bicarbonate concentrations with enriched homoacetogenic biocathode

An enrichment methodology was developed for a homoacetogenic biocathode that is able to function at high concentrations of bicarbonates for the microbial electrosynthesis (MES) of acetate from carbon dioxide. The study was performed in two stages; enrichment of consortia in serum bottles and the development of a biocathode in MES. A homoacetogenic consortium was sequentially grown under increasing concentrations of bicarbonate, in serum bottles, at room temperature. The acetate production rate was found to increase with the increase in the bicarbonate concentration and evidenced a maximum production rate of 260 mg/L d^-1 (15 g HCO₃^-/L). On the contrary, carbon conversion efficiency decreased with the increase in the bicarbonate concentration, which evidenced a maximum at 2.5 g HCO₃^-/L (90.16%). Following a further increase in the bicarbonate concentration up to 20 g HCO₃^-/L, a visible inhibition was registered with respect to the acetate production rate and the carbon conversion efficiency. Well adapted biomass from 15 g HCO₃^-/L was used to develop biocathodic catalyst for MES. An effective biocathode was developed after 4 cycles of operation, during which acetate production was improved gradually, evidencing a maximum production rate of 24.53 mg acetate L^-1 d^-1 (carbon conversion efficiency, 47.72%). Compared to the enrichment stage, the carbon conversion efficiency and the rate of acetate production in MES were found to be low. The production of acetate induced a change in the catholyte pH, from neutral conditions towards acidic conditions.

Electrosynthesis of acetate from inorganic carbon (HCO3-) with simultaneous hydrogen production and Cd(II) removal in multifunctional microbial electrosynthesis systems (MES)

The simultaneous production of acetate from bicarbonate (from CO₂ sequestration) and hydrogen gas, with concomitant removal of Cd(II) heavy metal in water is demonstrated in multifunctional metallurgical microbial electrosynthesis systems (MES) incorporating Cd(II) tolerant electrochemically active bacteria (EAB) (Ochrobactrum sp. X1, Pseudomonas sp. X3, Pseudomonas delhiensis X5, and Ochrobactrum anthropi X7). Strain X5 favored the production of acetate, while X7 preferred the production of hydrogen. The rate of Cd(II) removal by all EAB (1.20-1.32 mg/L/h), and the rates of acetate production by X5 (29.4 mg/L/d) and hydrogen evolution by X7 (0.0187 m³/m³/d) increased in the presence of a circuital current. The production of acetate and hydrogen was regulated by the release of extracellular polymeric substances (EPS), which also exhibited invariable catalytic activity toward the reduction of Cd(II) to Cd(0). The intracellular activities of glutathione (GSH), catalase (CAT), superoxide dismutase (SOD) and dehydrogenase were altered by the circuital current and Cd(II) concentration, and these regulated the products distribution. Such understanding enables the targeted manipulation of the MES operational conditions that favor the production of acetate from CO₂ sequestration with simultaneous hydrogen production and removal/recovery of Cd(II) from metal-contaminated and organics-barren waters.

Reduction of Cu(II) and simultaneous production of acetate from inorganic carbon by Serratia Marcescens biofilms and plankton cells in microbial electrosynthesis systems

Simultaneous Cu(II) reduction (6.42 ± 0.02 mg/L/h), acetate production (1.13 ± 0.02 mg/L/h) from inorganic carbon (i.e., CO₂ sequestration), and hydrogen evolution (0.0315 ± 0.0005 m³/m³/d) were achieved in a Serratia marcescens Q1 catalyzed microbial electrosynthesis system (MES). The biofilms released increasing amounts of extracellular polymeric substances (EPS) with a higher compositional diversity and stronger Cu(II) complexation, compared to the plankton cells, at higher Cu(II) concentrations (up to 80 mg/L) and circuital currents (cathodic potential of -900 mV vs. standard hydrogen electrode (SHE)). Moreover, the biofilms reduced Cu(II) to Cu(0) more effectively than the plankton cells. At Cu(II) concentrations below 80 mg/L, the dehydrogenase activity in the biofilms was higher than in the plankton cells, and increased with circuital current, which was converse to the lower activities of catalase (CAT), superoxide dismutase (SOD) and antioxidative glutathione (GSH) in the biofilms than the plankton cells, although all these physiological activities were positively correlated with the concentration of Cu(II). This is the first study that evaluates the EPS constituents and the physiological activities of the biofilms and the plankton cells in the MESs, that favors the production of acetate from CO₂ sequestration and the simultaneous reduction of Cu(II) from organics-barren waters contaminated with heavy metals.

Mo2C-induced hydrogen production enhances microbial electrosynthesis of acetate from CO2 reduction

BACKGROUND

Microbial electrosynthesis (MES) is a biocathode-driven process, in which electroautotrophic microorganisms can directly uptake electrons or indirectly via H₂ from the cathode as energy sources and CO₂ as only carbon source to produce chemicals.

RESULTS

This study demonstrates that a hydrogen evolution reaction (HER) catalyst can enhance MES performance. An active HER electrocatalyst molybdenum carbide (Mo₂C)-modified electrode was constructed for MES. The volumetric acetate production rate of MES with 12 mg cm^-2 Mo₂C was 0.19 ± 0.02 g L^-1 day^-1, which was 2.1 times higher than that of the control. The final acetate concentration reached 5.72 ± 0.6 g L^-1 within 30 days, and coulombic efficiencies of 64 ± 0.7% were yielded. Furthermore, electrochemical study, scanning electron microscopy, and microbial community analyses suggested that Mo₂C can accelerate the release of hydrogen, promote the formation of biofilms and regulate the mixed microbial flora.

CONCLUSION

Coupling a HER catalyst to a cathode of MES system is a promising strategy for improving MES efficiency.

Understanding the interdependence of operating parameters in microbial electrosynthesis: a numerical investigation

A mathematical model to predict the influence of system parameters such as substrate concentrations and operation cycle time on MES performance.

Photosensitization of electro-active microbes for solar assisted carbon dioxide transformation

Tandem bio-inorganic platform by combining efficient light harvesting properties of nano-inorganic semiconductor cadmium sulfide (CdS) with biocatalytic ability of electro-active bacteria (EAB) towards carbon dioxide (CO₂) conversion is reported. Sulfur was obtained from either cysteine (EAB-Cys-CdS) or hydrogen sulfide (EAB-H₂S-CdS) and experiments were carried out under similar conditions. Anchoring of the nano CdS cluster on the microbe surface was confirmed using electronic microscope. Bio-inorganic hybrid system was able to produce single and multi-carbon compounds from CO₂ in visible spectrum (λ > 400 nm). Though, acetic acid was dominant (EAB-Cys-CdS, 1.46 g/l and EAB-H₂S-CdS, 1.55 g/l) in both the microbe-CdS hybrids, its concentration as well as product slate varied significantly. EAB-H₂S-CdS produced hexanoic acid and less methanol fraction, while the EAB-Cys-CdS produced no hexanoic acid along with almost double the concentration of methanol. Due to easy harvesting process, this bio-inorganic hybrid represents unique sustainable approach for solar-to-chemical production via CO₂ transformation.

Enhanced reactive CO2 species formation via V2O5-promoted Ni/KCC-1 for low temperature activation of CO2 methanation

Incorporation of V₂O₅ on Ni/KCC-1 catalysts enhanced CO₂ adsorption and activation through additional basic sites and more exposed Ni sites.

Applications of Emerging Bioelectrochemical Technologies in Agricultural Systems: A Current Review

Background: Bioelectrochemical systems (BESs) are emerging energy-effective and environment-friendly technologies. Different applications of BESs are able to effectively minimize wastes and treat wastewater while simultaneously recovering electricity, biohydrogen and other value-added chemicals via specific redox reactions. Although there are many studies that have greatly advanced the performance of BESs over the last decade, research and reviews on agriculture-relevant applications of BESs are very limited. Considering the increasing demand for food, energy and water due to human population expansion, novel technologies are urgently needed to promote productivity and sustainability in agriculture. Methodology: This review study is based on an extensive literature search regarding agriculture-related BES studies mainly in the last decades (i.e., 2009–2018). The databases used in this review study include Scopus, Google Scholar and Web of Science. The current and future applications of bioelectrochemical technologies in agriculture have been discussed. Findings/Conclusions: BESs have the potential to recover considerable amounts of electric power and energy chemicals from agricultural wastes and wastewater. The recovered energy can be used to reduce the energy input into agricultural systems. Other resources and value-added chemicals such as biofuels, plant nutrients and irrigation water can also be produced in BESs. In addition, BESs may replace unsustainable batteries to power remote sensors or be designed as biosensors for agricultural monitoring. The possible applications to produce food without sunlight and remediate contaminated soils using BESs have also been discussed. At the same time, agricultural wastes can also be processed into construction materials or biochar electrodes/electrocatalysts for reducing the high costs of current BESs. Future studies should evaluate the long-term performance and stability of on-farm BES applications.