Ex situ generation of stoichiometric HCN and its application in the Pd-catalysed cyanation of aryl bromides: evidence for a transmetallation step between two oxidative addition Pd-complexes

Nickel-Catalyzed Cyanation of Allylic Alcohols: High Degree of Chiral Inversion in Aqueous Reaction Media

Nickel-catalyzed aqueous cyanation of allylic alcohols is herein described. This catalytic protocol provided environmentally friendly and operationally simple access to a variety of allylic nitriles in good yields. For chiral allylic alcohols, the reaction gave chiral allylic nitriles with a high degree of chiral inversion. The accelerated release of cyanide in H2O was crucial for the success of this reaction.

Lignocellulose Conversion via Catalytic Transformations Yields Methoxyterephthalic Acid Directly from Sawdust

Poly(ethylene terephthalate) polyester represents the most common class of thermoplastic polymers widely used in the textile, bottling, and packaging industries. Terephthalic acid and ethylene glycol, both of petrochemical origin, are polymerized to yield the polyester. However, an earlier report suggests that polymerization of methoxyterephthalic acid with ethylene glycol provides a methoxy-polyester with similar properties. Currently, there are no established biobased synthetic routes toward the methoxyterephthalic acid monomer. Here, we show a viable route to the dicarboxylic acid from various tree species involving three catalytic steps. We demonstrate that sawdust can be converted to valuable aryl nitrile intermediates through hydrogenolysis, followed by an efficient fluorosulfation-catalytic cyanation sequence (>90%) and then converted to methoxyterephthalic acid by hydrolysis and oxidation. A preliminary polymerization result indicates a methoxy-polyester with acceptable thermal properties.

Elucidating the reaction mechanism of a palladium-palladium dual catalytic process through kinetic studies of proposed elementary steps

In the synergistic dual catalytic process, the kinetics of the catalytic cycles must be balanced for the successful outcome of the reaction. Therefore, the analysis of the kinetics of the independent catalytic cycles is essential for such reactions, as it enables their relational optimization as well as their design. Here we describe an analysis of the mechanism of a catalytic synergistic bimetallic reaction through the experimental study of a palladium-catalysed cross-coupling of aryl halides with terminal alkynes, an example of a monometallic dual catalytic process. The proposed mechanism of the investigated reaction was disassembled into two palladium catalytic cycles and further into elementary reactions, and each step was studied independently. The described mechanistic analysis allowed us to identify the rate-determining step of the catalytic process by comparing the rates of the elementary reactions under similar reaction conditions, balanced kinetics of the palladium catalytic cycles, and also in which step which reagent enters the catalytic cycle and how.

Mechanistic Investigation of the Nickel-Catalyzed Metathesis between Aryl Thioethers and Aryl Nitriles

Functional group metathesis is an emerging field in organic chemistry with promising synthetic applications. However, no complete mechanistic studies of these reactions have been reported to date, particularly regarding the nature of the key functional group transfer mechanism. Unraveling the mechanism of these transformations would not only allow for their further improvement but would also lead to the design of novel reactions. Herein, we describe our detailed mechanistic studies of the nickel-catalyzed functional group metathesis reaction between aryl methyl sulfides and aryl nitriles, combining experimental and computational results. These studies did not support a mechanism proceeding through reversible migratory insertion of the nitrile into a Ni-Ar bond and provided strong support for an alternative mechanism involving a key transmetalation step between two independently generated oxidative addition complexes. Extensive kinetic analysis, including rate law determination and Eyring analysis, indicated the oxidative addition complex of aryl nitrile as the resting state of the catalytic reaction. Depending on the concentration of aryl methyl sulfide, either the reductive elimination of aryl nitrile or the oxidative addition into the C(sp²)-S bond of aryl methyl sulfide is the turnover-limiting step of the reaction. NMR studies, including an unusual ³¹P-²H HMBC experiment using deuterium-labeled complexes, unambiguously demonstrated that the sulfide and cyanide groups exchange during the transmetalation step, rather than the two aryl moieties. In addition, Eyring and Hammett analyses of the transmetalation between two Ni(II) complexes revealed that this central step proceeds via an associative mechanism. Organometallic studies involving the synthesis, isolation, and characterization of all putative intermediates and possible deactivation complexes have further shed light on the reaction mechanism, including the identification of a key deactivation pathway, which has led to an improved catalytic protocol.

Pd-Catalyzed Cross-Couplings: On the Importance of the Catalyst Quantity Descriptors, mol % and ppm

This Review examines parts per million (ppm) palladium concentrations in catalytic cross-coupling reactions and their relationship with mole percentage (mol %). Most studies in catalytic cross-coupling chemistry have historically focused on the concentration ratio between (pre)catalyst and the limiting reagent (substrate), expressed as mol %. Several recent papers have outlined the use of “ppm level” palladium as an alternative means of describing catalytic cross-coupling reaction systems. This led us to delve deeper into the literature to assess whether “ppm level” palladium is a practically useful descriptor of catalyst quantities in palladium-catalyzed cross-coupling reactions. Indeed, we conjectured that many reactions could, unknowingly, have employed low “ppm levels” of palladium (pre)catalyst, and generally, what would the spread of ppm palladium look like across a selection of studies reported across the vast array of the cross-coupling chemistry literature. In a few selected examples, we have examined other metal catalyst systems for comparison with palladium.

Pd-Catalyzed Difluoromethylations of Aryl Boronic Acids, Halides, and Pseudohalides with ICF2 H Generated ex Situ

An expedient ex-situ generation of difluoroiodomethane (DFIM) and its immediate use in a Pd-catalyzed difluoromethylation of aryl boronic acids and ester derivatives in a two-chamber reactor is reported. Heating a solution of bromodifluoroacetic acid with sodium iodide in sulfolane proved to be effective for the generation of near stoichiometric amounts of DFIM for the ensuing catalytic coupling step. A two-step difluoromethylation of aryl (pseudo)halides with tetrahydroxydiboron as a low-cost reducing agent, both promoted by Pd catalysis, proved effective to install this fluorine-containing C1 group onto several pharmaceutically relevant molecules. Finally, the method proved adaptable to deuterium incorporation by simply adding D2 O to the DFIM-generating chamber.

Transfer hydrogenation of nitroarenes using cellulose filter paper-supported Pd/C by filtration as well as sealed methods

A reductive filter paper for selective nitro reduction has been prepared by modification of a pristine cellulose filter paper by Pd/C nanoparticles, as a portable catalyst. The reaction was performed in two different set-ups including (i) filtration and (ii) sealed systems, in the presence of ammonium formate and ex situ generated hydrogen gas reducing agents, respectively. In the sealed system in the presence of H2 gas, the halogenated nitroarenes were completely reduced, while in the filtration system, different derivatives of the nitroarenes were selectively reduced to aryl amines. In both systems, the reduction of nitroarenes to aryl amines was performed with high efficiency and selectivity, comparable to a heterogeneous system. Reaction parameters were comprehensively designed using Design Expert software and then studied. The properties of the catalytic filter paper were studied in detail from the points of view of swellability, shrinkage, reusability, and stability against acidic, alkaline, and oxidative reagents.

Thermal Mapping of Self-Promoted Calcium Carbide Reactions for Performing Energy-Economic Processes

The syntheses of various chemical compounds require heating. The intrinsic release of heat in exothermic processes is a valuable heat source that is not effectively used in many reactions. In this work, we assessed the released heat during the hydrolysis of an energy-rich compound, calcium carbide, and explored the possibility of its usage. Temperature profiles of carbide hydrolysis were recorded, and it was found that the heat release depended on the cosolvent and water/solvent ratio. Thus, the release of heat can be controlled and adjusted. To monitor the released heat, a special tube-in-tube reactor was assembled using joining part 3D-printed with nylon. The thermal effect of the reaction was estimated using a thermoimaging IR monitor. It was found that the kinetics of heat release are different when using mixtures of water with different solvents, and the maximum achievable temperature depends on the type of solvent and the amount of water and carbide. The possibility of using the heat released during carbide hydrolysis to initiate a chemical reaction was tested using a hydrothiolation reaction—the nucleophilic addition of thiols to acetylene. In a model experiment, the yield of the desired product with the use of heat from carbide hydrolysis was 89%, compared to 30% in this intrinsic heating, which was neglected.

Regio- and Stereoselective Hydroiodination of Internal Alkynes with Ex Situ-Generated HI

Herein, we report an efficient and practical hydroiodination of internal alkynes using HI generated ex situ from the readily available triethylsilane and I₂. This system offers high regio- and stereoselectivity to afford (E)-vinyl iodides in good yields under mild conditions. Furthermore, the hydroiodination reaction shows high functional group tolerance toward alkyl, methoxy, halogen, trifluoromethyl, cyano, ester, halomethyl, acid-sensitive silyl ether, and acetal moieties.

Mechanistic study of the cooperative palladium/Lewis acid-catalyzed transfer hydrocyanation reaction: the origin of the regioselectivity

Density functional theory (DFT) calculations have been performed to gain insights into the catalytic mechanism of the palladium/Lewis acid-catalyzed transfer hydrocyanation of terminal alkenes to reach the linear alkyl nitrile with excellent anti-Markovnikov selectivity. The study reveals that the whole catalysis can be characterized via three stages: (i) oxidative addition generates the π-allyl complex IM2, followed by β-hydride elimination leading to the intermediate IM4, (ii) ligand exchange followed by Pd-H migratory alkene insertion gives the anti-Markovnikov intermediate IM6 and (iii) IM6 undergoes a reductive elimination step to form the linear terminal nitrile 3a and regenerates the active species for the next catalytic cycle. Each stage is kinetically and thermodynamically feasible. The oxidative addition step, with a barrier of 30.9 kcal mol-1, should be the rate-determining step (RDS) in the whole catalysis, which agrees with the experimental high temperature of 110 °C. Furthermore, the origin of the high regioselectivity of the product with excellent anti-Markovnikov selectivity is discussed.

Cyanation: a photochemical approach and applications in organic synthesis

This review summarises the photocatalytic cyanation strategies to construct C(sp²)–CN, C(sp³)–CN and X–CN (X = N, S) bonds.

Rapid Organocatalytic Formation of Carbon Monoxide: Application towards Carbonylative Cross Couplings

Herein, the first organocatalytic method for the transformation of non‐derivatized formic acid into carbon monoxide (CO) is introduced. Formylpyrrolidine (FPyr) and trichlorotriazine (TCT), which is a cost‐efficient commodity chemical, enable this decarbonylation. Utilization of dimethylformamide (DMF) as solvent and catalyst even allows for a rapid CO generation at room temperature. Application towards four different carbonylative cross coupling protocols demonstrates the high synthetic utility and versatility of the new approach. Remarkably, this also comprehends a carbonylative Sonogashira reaction at room temperature employing intrinsically difficult electron‐deficient aryl iodides. Commercial ¹³C‐enriched formic acid facilitates the production of radiolabeled compounds as exemplified by the pharmaceutical Moclobemide. Finally, comparative experiments verified that the present method is highly superior to other protocols for the activation of carboxylic acids.

Controlled Release of Reactive Gases: A Tale of Taming Carbon Monoxide

This Personal Account describes the development of air-stable and solid precursors for on-demand release of carbon monoxide. In combination with the development of a two-chamber reactor, COware®, CO liberation can be achieved under safe working conditions, as well as allowing transition metal-mediated carbonylations with stoichiometric carbon monoxide. Particularly appealing is the adaptability of this chemical technology for the preparation of carbon isotope labeled bioactive compounds.

Overcoming Selectivity Issues in Reversible Catalysis: A Transfer Hydrocyanation Exhibiting High Kinetic Control

Reversible catalytic reactions operate under thermodynamic control, and thus, establishing a selective catalytic system poses a considerable challenge. Herein, we report a reversible transfer hydrocyanation protocol that exhibits high selectivity for the thermodynamically less favorable branched isomer. Selectivity is achieved by exploiting the lower barrier for C-CN oxidative addition and reductive elimination at benzylic positions in the absence of a cocatalytic Lewis acid. Through the design of a novel type of HCN donor, a practical, branched-selective, HCN-free transfer hydrocyanation was realized. The synthetically useful resolution of a mixture of branched and linear nitrile isomers was also demonstrated to underline the value of reversible and selective transfer reactions. In a broader context, this work demonstrates that high kinetic selectivity can be achieved in reversible transfer reactions, thus opening new horizons for their synthetic applications.

Ex situ gas generation for lab scale organic synthesis

This review discusses recent examples of ex situ generated gaseous reagents, and their use in organic synthesis.

HCN on Tap: On-Demand Continuous Production of Anhydrous HCN for Organic Synthesis

A continuous process for the on-demand generation, separation, and reaction of hydrogen cyanide (HCN) using membrane separation technology was developed. The inner tube of the reactor is manufactured from a gas-permeable, hydrophobic fluoropolymer (Teflon AF-2400) membrane. HCN is formed from aqueous reagents within the inner tube and then diffuses through the membrane into an outer tubing containing organic solvent. This technique enabled the safe handling of HCN for three different organic transformations without the need for distillation.

Cooperative Palladium/Lewis Acid-Catalyzed Transfer Hydrocyanation of Alkenes and Alkynes Using 1-Methylcyclohexa-2,5-diene-1-carbonitrile

Catalytic transfer hydrocyanation represents a clean and safe alternative to hydrocyanation processes using toxic HCN gas. Such reactions provide access to pharmaceutically important nitrile derivatives starting with alkenes and alkynes. Herein, an efficient and practical cooperative palladium/Lewis acid-catalyzed transfer hydrocyanation of alkenes and alkynes is presented using 1-methylcyclohexa-2,5-diene-1-carbonitrile as a benign and readily available HCN source. A large set of nitrile derivatives (>50 examples) are prepared from both aliphatic and aromatic alkenes with good to excellent anti-Markovnikov selectivity. A range of aliphatic alkenes engage in selective hydrocyanation to provide the corresponding nitriles. The introduced method is useful for chain walking hydrocyanation of internal alkenes to afford terminal nitriles in good regioselectivities. This protocol is also applicable to late-stage modification of bioactive molecules.

New trends and applications in cyanation isotope chemistry

In this review, newly developed cyanation methods are evaluated in regards to their usefulness in synthetic isotope chemistry. In combination with already established protocols in ^13/14 C- or ¹¹ C-isotope chemistry, this manuscript should help isotope scientists to choose the best possible method for their scientific cyanation problem, but with the main focus on ¹⁴ C-applications. Perhaps, most promising of the described novel cyanation reaction is the decarboxylation-cyanation-hydrolysis approach which makes a 1-step late-stage functionalization procedure possible.

Mechanochemical Activation of Iron Cyano Complexes: A Prebiotic Impact Scenario for the Synthesis of α-Amino Acid Derivatives

Mechanochemical activation of iron cyano complexes by ball milling results in the formation of HCN, which can be trapped and incorporated into α-aminonitriles. This prebiotic impact scenario can be extended by mechanochemically transforming the resulting α-aminonitriles into α-amino amides using a chemical route related to early Earth conditions.