Mechanochemistry of the mechanical bond

Mechanical scission of a knotted polymer

Molecular knots and entanglements form randomly and spontaneously in both biological and synthetic polymer chains. It is known that macroscopic materials, such as ropes, are substantially weakened by the presence of knots, but until now it has been unclear whether similar behaviour occurs on a molecular level. Here we show that the presence of a well-defined overhand knot in a polymer chain substantially increases the rate of scission of the polymer under tension (≥2.6× faster) in solution, because deformation of the polymer backbone induced by the tightening knot activates otherwise unreactive covalent bonds. The fragments formed upon severing of the knotted chain differ from those that arise from cleavage of a similar, but unknotted, polymer. Our solution studies provide experimental evidence that knotting can contribute to higher mechanical scission rates of polymers. It also demonstrates that entanglement design can be used to generate mechanophores that are among the most reactive described to date, providing opportunities to increase the reactivity of otherwise inert functional groups.

A Stretchable and Tough Graphene Film Enabled by Mechanical Bond

The pursuit of fabricating high-performance graphene films has aroused considerable attention due to their potential for practical applications. However, developing both stretchable and tough graphene films remains a formidable challenge. To address this issue, we herein introduce mechanical bond to comprehensively improve the mechanical properties of graphene films, utilizing [2]rotaxane as the bridging unit. Under external force, the [2]rotaxane cross-link undergoes intramolecular motion, releasing hidden chain and increasing the interlayer slip distance between graphene nanosheets. Compared with graphene films without [2]rotaxane cross-linking, the presence of mechanical bond not only boosted the strength of graphene films (247.3 vs 74.8 MPa) but also markedly promoted the tensile strain (23.6 vs 10.2 %) and toughness (23.9 vs 4.0 MJ/m3). Notably, the achieved tensile strain sets a record high and the toughness surpasses most reported results, rendering the graphene films suitable for applications as flexible electrodes. Even when the films were stretched within a 20 % strain and repeatedly bent vertically, the light-emitting diodes maintained an on-state with little changes in brightness. Additionally, the film electrodes effectively actuated mechanical joints, enabling uninterrupted grasping movements. Therefore, the study holds promise for expanding the application of graphene films and simultaneously inspiring the development of other high-performance two-dimensional films.

Pushing vs Pulling: The Unique Geometry of Mechanophore Activation in a Rotaxane Force Actuator

Mechanophores (mechanosensitive molecules) are usually activated by pulling them with covalently attached polymers. A rotaxane actuator offers a new geometry of activation as the macrocycle pushes against a stoppering mechanophore. Here we compare both pulling and pushing activations and show that pushing is more efficient and selective than pulling. We found that the pulling activation of a bulky furan/maleimide adduct occurs via two competing dissociation pathways: retrocycloaddition and heterolytic cleavage (generating a trityl cation in the process), while the same adduct only cleaves by retrocycloaddition during pushing activation. These results further demonstrate the efficacy and versatility of rotaxane actuators.

Synthesis of 'Impossible' Rotaxanes

'Impossible' rotaxanes, which are constituted by interlocked components without obvious binding motifs, have attracted the interest of the mechanically interlocked molecules (MIMs) community. Within the synthetic efforts reported in the last decades towards the preparation of MIMs, some innovative protocols for accessing 'impossible' rotaxanes have been developed. This short review highlights different selected synthetic examples of 'impossible' rotaxanes, as well as suggests some future directions of this research area.

Force-controlled release of small molecules with a rotaxane actuator

Force-controlled release of small molecules offers great promise for the delivery of drugs and the release of healing or reporting agents in a medical or materials context1-3. In polymer mechanochemistry, polymers are used as actuators to stretch mechanosensitive molecules (mechanophores)4. This technique has enabled the release of molecular cargo by rearrangement, as a direct5,6 or indirect7-10 consequence of bond scission in a mechanophore, or by dissociation of cage11, supramolecular12 or metal complexes13,14, and even by 'flex activation'15,16. However, the systems described so far are limited in the diversity and/or quantity of the molecules released per stretching event1,2. This is due to the difficulty in iteratively activating scissile mechanophores, as the actuating polymers will dissociate after the first activation. Physical encapsulation strategies can be used to deliver a larger cargo load, but these are often subject to non-specific (that is, non-mechanical) release3. Here we show that a rotaxane (an interlocked molecule in which a macrocycle is trapped on a stoppered axle) acts as an efficient actuator to trigger the release of cargo molecules appended to its axle. The release of up to five cargo molecules per rotaxane actuator was demonstrated in solution, by ultrasonication, and in bulk, by compression, achieving a release efficiency of up to 71% and 30%, respectively, which places this rotaxane device among the most efficient release systems achieved so far1. We also demonstrate the release of three representative functional molecules (a drug, a fluorescent tag and an organocatalyst), and we anticipate that a large variety of cargo molecules could be released with this device. This rotaxane actuator provides a versatile platform for various force-controlled release applications.

Photoresponsive Supramolecular Cages and Macrocycles

The utilisation of light to achieve precise manipulation and control over the structure and function of supramolecular assemblies has emerged as a highly promising approach in the development of complex, configurable, or multifunctional systems and nanoscopic machine-like entities. In this minireview, we highlight recent examples of self-assembled and covalently bound cages and macrocycles with a focus on the external and internal functionalisation of a structure with a photoswitchable unit or the embedment of a photoswitch into the framework of a structure. Functionalising the interior or exterior of a supramolecular cage or macrocycle with a photoresponsive group enables control over different properties, such as guest binding or assembly in the solid-state, while the overall shape of the assembly often undergoes no significant change. By directly integrating a photoswitchable unit into the framework of a supramolecular structure, the isomerisation can either induce a geometry change, the disassembly, or the disassembly and reassembly of the structure. Historical and recent examples covered in this review are based on azobenzene, diarylethene, stilbene photoswitches, or alkene motors that were incorporated into macrocycles and cages constructed by metal-organic, dynamic covalent, or covalent bonds.

Sacrificial Mechanical Bond is as Effective as a Sacrificial Covalent Bond in Increasing Cross-Linked Polymer Toughness

Sacrificial chemical bonds have been used effectively to increase the toughness of elastomers because such bonds dissociate at forces significantly below the fracture limit of the primary load-bearing bonds, thereby dissipating local stress. This approach owes much of its success to the ability to adjust the threshold force at which the sacrificial bonds fail at the desired rate, for example, by selecting either covalent or noncovalent sacrificial bonds. Here, we report experimental and computational evidence that a mechanical bond, responsible for the structural integrity of a rotaxane or a catenane, increases the elastomer's fracture strain, stress, and energy as much as a covalent bond of comparable mechanochemical dissociation kinetics. We synthesized and studied 6 polyacrylates cross-linked by either difluorenylsuccinonitrile (DFSN), which is an established sacrificial mechanochromic moiety; a [2]rotaxane, whose stopper allows its wheel to dethread on the same subsecond time scale as DFSN dissociates when either is under tensile force of 1.5-2 nN; a structurally homologous [2]rotaxane with a much bulkier stopper that is stable at force >5.5 nN; similarly stoppered [3]rotaxanes containing DFSN in their axles; and a control polymer with aliphatic nonsacrificial cross-links. Our data suggest that mechanochemical dethreading of a rotaxane without failure of any covalent bonds may be an important, hitherto unrecognized, contributor to the toughness of some rotaxane-cross-linked polymers and that sacrificial mechanical bonds provide a mechanism to control material fracture behavior independently of the mechanochemical response of the covalent networks, due to their distinct relationships between structure and mechanochemical reactivity.

Catenane and Rotaxane Synthesis from Cucurbit[6]uril-Mediated Azide-Alkyne Cycloaddition

The chemistry of mechanically interlocked molecules (MIMs) such as catenane and rotaxane is full of new opportunities for the presence of a mechanical bond, and the efficient synthesis of these molecules is therefore of fundamental importance in realizing their unique properties and functions. While many different types of preorganizing interactions and covalent bond formation strategies have been exploited in MIMs synthesis, the use of cucurbit[6]uril (CB[6]) in simultaneously templating macrocycle interlocking and catalyzing the covalent formation of the interlocked components is particularly advantageous in accessing high-order catenanes and rotaxanes. In this review, catenane and rotaxane obtained from CB[6]-catalyzed azide-alkyne cycloaddition will be discussed, with special emphasis on the synthetic strategies employed for obtaining complex [n]rotaxanes and [n]catenanes, as well as their properties and functions.

Mechanochemical asymmetric three-component Mannich reaction involving unreactive arylamines

We report here a mechanochemical protocol for an asymmetric three-component Mannich reaction involving unreactive arylamines with simple cyclic ketones and arylaldehydes catalyzed by (S)-proline with a chiral diol. In this mechanochemical protocol, ball milling enables reaction acceleration and enantioselectivity control. The reported asymmetric three-component Mannich reactions usually involve reactive arylamines such as p-anisidine and phenylamine, while the catalytic asymmetric Mannich reactions involving unreactive arylamines in solution did not proceed smoothly or gave low yields and enantioselectivities. However, the use of ball-milling techniques overcomes the deficiency of the batch systems in solution and avoids the use of toxic organic solvents. The desired products were obtained in moderate-to-good yields (49%-80%) with good-to-high enantioselectivities (up to 99% ee). This is the first example of a mechanochemically activated catalytic asymmetric three-component Mannich reaction involving unreactive arylamines.

Advances in single-molecule junctions as tools for chemical and biochemical analysis

The development of miniaturized electronics has led to the design and construction of powerful experimental platforms capable of measuring electronic properties to the level of single molecules, along with new theoretical concepts to aid in the interpretation of the data. A new area of activity is now emerging concerned with repurposing the tools of molecular electronics for applications in chemical and biological analysis. Single-molecule junction techniques, such as the scanning tunnelling microscope break junction and related single-molecule circuit approaches have a remarkable capacity to transduce chemical information from individual molecules, sampled in real time, to electrical signals. In this Review, we discuss single-molecule junction approaches as emerging analytical tools for the chemical and biological sciences. We demonstrate how these analytical techniques are being extended to systems capable of probing chemical reaction mechanisms. We also examine how molecular junctions enable the detection of RNA, DNA, and traces of proteins in solution with limits of detection at the zeptomole level.

Topologically Controlled Syntheses of Unimolecular Oligo[n]catenanes

Catenanes are a well-known class of mechanically interlocked molecules that possess chain-like architectures and have been investigated for decades as molecular machines and switches. However, the synthesis of higher-order catenanes with multiple, linearly interlocked molecular rings has been greatly impeded by the generation of unwanted oligomeric byproducts and figure-of-eight topologies that compete with productive ring closings. Here, we report two general strategies for the synthesis of oligo[n]catenanes that rely on a molecular "zip-tie" strategy, where the "zip-tie" is a central core macrocycle precursor bearing two phenanthroline (phen) ligands to make odd-numbered oligo[n]catenanes, or a preformed asymmetric iron(II) complex consisting of two macrocycle precursors bearing phen and terpyridine ligands to make even-numbered oligo[n]catenanes. In either case, preformed macrocycles or [2]catenanes are threaded onto the central "zip-tie" core using metal templation prior to ring-closing metathesis (RCM) reactions that generate several mechanical bonds in one pot. Using these synthetic strategies, a family of well-defined linear oligo[n]catenanes were synthesized, where n = 2, 3, 4, 5, or 6 interlocked molecular rings, and n = 6 represents the highest number of linearly interlocked rings reported to date for any isolated unimolecular oligo[n]catenane.

Mechanical Activation of Forbidden Photoreactivity in Oxa-di-π-methane Rearrangement

In this work, we demonstrate that the forbidden oxirane-type photoproduct (the cyclopropyl ketone photoproduct is the allowed one) of the oxa-di-π-methane photorearrangement can be obtained by mechanochemical control of the photoreactions. This control is achieved by the application of simple force pairs rationally chosen. By analyzing in detail the effect of the applied forces on this photoreaction, it comes to light that the mechanical action affects the diverse properties of the oxa-di-π-methane rearrangement, modifying all the steps of the reaction: (i) the initial ground-state conformers' distribution becomes affected; (ii) the new conformational population makes the triplet excitation process to be changed, responding to the magnitude of the applied force; (iii) the stability of the different intermediates along the triplet pathway also becomes affected, changing the dynamical behavior of the system and the reaction kinetics; and (iv) the intersystem crossing also becomes strongly affected, making the forbidden oxirane-type photoproduct to decay more efficiently to the ground state. All these changes provide a complex scenario where a detailed study of the effect of applied forces is necessary in order to predict its overall effect on the photoreactivity.

Revealing Localised Mechanochemistry of Biomaterials Using In Situ Multiscale Chemical Analysis

The study of mechanical and chemical phenomena arising within a material that is being subjected to external stress is termed mechanochemistry (MC). Recent advances in MC have revealed the prospect not only to enable a greener route to chemical transformations but also to offer previously unobtainable opportunities in the production and screening of biomaterials. To date, the field of MC has been constrained by the inability of current characterisation techniques to provide essential localised multiscale chemically mapping information. A potential method to overcome this is secondary electron hyperspectral imaging (SEHI). SEHI is a multiscale material characterisation technique applied within a scanning electron microscope (SEM). Based on the collection of secondary electron (SE) emission spectra at low primary beam energies, SEHI is applicable to the chemical assessment of uncoated polymer surfaces. Here, we demonstrate that SEHI can provide in situ MC information using poly(glycerol sebacate)-methacrylate (PGS-M) as an example biomaterial of interest. This study brings the use of a bespoke in situ SEM holder together with the application of SEHI to provide, for the first time, enhanced biomaterial mechanochemical characterisation.

Allosteric Binding-Induced Intramolecular Mechanical-Strain Engineering

Recently, polymer mechanochemistry has attracted much scientific interest due to its potential to develop degradable polymers. When the two ends of a polymer chain experience a linear pulling stress, molecular strain builds up, at sufficiently strong force, a bond scission of the weakest covalent bond results. In contrast, bond-breaking events triggered by conformational stress are much less explored. Here, we discovered that a Zn salen complex would undergo conformational switching upon allosteric complexation with alkanediammonium guests. By controlling the guest chain length, the torsional strain experienced by Zn complex can be modulated to induce bond cleavage with chemical stimulus, and reactivity trend is predicted by conformational analysis derived by DFT calculation. Such strain-release reactivity by a Zn(salen) complex initiated by guest binding is reminiscent of conformation-induced reactivity of enzymes to enable chemical events that are otherwise inhibited.

Release of Molecular Cargo from Polymer Systems by Mechanochemistry

The design and manipulation of (multi)functional materials at the nanoscale holds the promise of fuelling tomorrow's major technological advances. In the realm of macromolecular nanosystems, the incorporation of force-responsive groups, so called mechanophores, has resulted in unprecedented access to responsive behaviours and enabled sophisticated functions of the resulting structures and advanced materials. Among the diverse force-activated motifs, the on-demand release or activation of compounds, such as catalysts, drugs, or monomers for self-healing, are sought-after since they enable triggering pristine small molecule function from macromolecular frameworks. Here, we highlight examples of molecular cargo release systems from polymer-based architectures in solution by means of sonochemical activation by ultrasound (ultrasound-induced mechanochemistry). Important design concepts of these advanced materials are discussed, as well as their syntheses and applications.

Action of Mechanical Forces on Polymerization and Polymers

In this review, we summarize recent developments in the field of the mechanochemistry of polymers. The aim of the review is to consider the consequences of mechanical forces and actions on polymers and polymer synthesis. First, we review classical works on chemical reactions and polymerization processes under strong shear deformations. Then, we analyze two emerging directions of research in mechanochemistry-the role of mechanophores and, for the first time, new physical phenomena, accompanying external impulse mechanical actions on polymers. Mechanophores have been recently proposed as sensors of fatigue and cracks in polymers and composites. The effects of the high-pressure pulsed loading of polymers and composites include the Dzyaloshinskii-Moriya effect, emission of superradiation and the formation of metal nanoparticles. These effects provide deeper insight into the mechanism of chemical reactions under shear deformations and pave the way for further research in the interests of modern technologies.

Mechanochemical Organocatalysis: Do High Enantioselectivities Contradict What We Might Expect?

Ball mills input energy to samples by pulverising the contents of the jar. Each impact on the sample or wall of the jar results in an instantaneous transmission of energy in the form of a temperature and pressure increase (volume reduction). Conversely, enantioselective organocatalytic reactions proceed through perceived delicate and well-organised transition states. Does there exist a dichotomy in the idea of enantioselective mechanochemical organocatalysis? This Review provides a survey of the literature reporting the combination of organocatalytic reactions with mechanochemical ball milling conditions. Where possible, direct comparisons of stirred in solution, stirred neat and ball milled processes are drawn with a particular focus on control of stereoselectivity.

Bridging pico-to-nanonewtons with a ratiometric force probe for monitoring nanoscale polymer physics before damage

Understanding the transmission of nanoscale forces in the pico-to-nanonewton range is important in polymer physics. While physical approaches have limitations in analyzing the local force distribution in condensed environments, chemical analysis using force probes is promising. However, there are stringent requirements for probing the local forces generated before structural damage. The magnitude of those forces corresponds to the range below covalent bond scission (from 200 pN to several nN) and above thermal fluctuation (several pN). Here, we report a conformationally flexible dual-fluorescence force probe with a theoretically estimated threshold of approximately 100 pN. This probe enables ratiometric analysis of the distribution of local forces in a stretched polymer chain network. Without changing the intrinsic properties of the polymer, the force distribution was reversibly monitored in real time. Chemical control of the probe location demonstrated that the local stress concentration is twice as biased at crosslinkers than at main chains, particularly in a strain-hardening region. Due to the high sensitivity, the percentage of the stressed force probes was estimated to be more than 1000 times higher than the activation rate of a conventional mechanophore.

Weinreb Amide, Ketone and Amine as Potential and Competitive Secondary Molecular Stations for Dibenzo-[24]Crown-8 in [2]Rotaxane Molecular Shuttles

This paper reports the synthesis and study of new pH-sensitive DB24C8-based [2]rotaxane molecular shuttles that contain within their axle four potential sites of interaction for the DB24C8: ammonium, amine, Weinreb amide, and ketone. In the protonated state, the DB24C8 lay around the best ammonium site. After either deprotonation or deprotonation-then-carbamoylation of the ammonium, different localizations of the DB24C8 were seen, depending on both the number and nature of the secondary stations and steric restriction. Unexpectedly, the results indicated that the Weinreb amide was not a proper secondary molecular station for the DB24C8. Nevertheless, through its methoxy side chain, it slowed down the shuttling of the macrocycle along the threaded axle, thereby partitioning the [2]rotaxane into two translational isomers on the NMR timescale. The ketone was successfully used as a secondary molecular station, and its weak affinity for the DB24C8 was similar to that of a secondary amine.

Ultrasound-controlled drug release and drug activation for cancer therapy

Traditional chemotherapy suffers from severe toxicity and side effects that limit its maximum application in cancer therapy. To overcome this challenge, an ideal treatment strategy would be to selectively control the release or regulate the activity of drugs to minimize the undesirable toxicity. Recently, ultrasound (US)-responsive drug delivery systems (DDSs) have attracted significant attention due to the non-invasiveness, high tissue penetration depth, and spatiotemporal controllability of US. Moreover, the US-induced mechanical force has been proven to be a robust method to site-selectively rearrange or cleave bonds in mechanochemistry. This review describes the US-activated DDSs from the fundamental basics and aims to present a comprehensive summary of the current understanding of US-responsive DDSs for controlled drug release and drug activation. First, we summarize the typical mechanisms for US-responsive drug release and drug activation. Second, the main factors affecting the ultrasonic responsiveness of drug carriers are outlined. Furthermore, representative examples of US-controlled drug release and drug activation are discussed, emphasizing their novelty and design principles. Finally, the challenges and an outlook on this promising therapeutic strategy are discussed.

Force-Induced Near-Infrared Chromism of Mechanophore-Linked Polymers

A near-infrared (NIR) mechanophore was developed and incorporated into a poly(methyl acrylate) chain to showcase the first force-induced NIR chromism in polymeric materials. This mechanophore, based on benzo[1,3]oxazine (OX) fused with a heptamethine cyanine moiety, exhibited NIR mechanochromism in solution, thin-film, and bulk states. The mechanochemical activity was validated using UV-vis-NIR absorption/fluorescence spectroscopies, gel permeation chromatography (GPC), NMR, and DFT simulations. Our work demonstrates that NIR mechanochromic polymers have considerable potential in mechanical force sensing, damage detection, bioimaging, and biomechanics.

Rotaxane-Based Dual Function Mechanophores Exhibiting Reversible and Irreversible Responses

Mechanochromic mechanophores permit the design of polymers that indicate mechanical events through optical signals. Here we report rotaxane-based supramolecular mechanophores that display both reversible and irreversible fluorescence changes. These responses are triggered by different forces and are achieved by exploiting the molecular shuttling function and force-induced dethreading of rotaxanes. The new rotaxane mechanophores are composed of a ring featuring a luminophore, which is threaded onto an axle with a matching quencher and two stoppers. In the stress-free state, the luminophore is preferentially located in the proximity of the quencher, and the emission is quenched. The luminophore slides away from the quencher when a force is applied and the fluorescence is switched on. This effect is reversible, unless the force is so high that the luminophore-carrying ring slips past the stopper and dethreading occurs. We show that the combination of judiciously selected ring and stopper moieties is crucial to attain interlocked structures that display such a dual response. PU elastomers that contain such doubly responsive rotaxanes exhibit reversible fluorescence changes over multiple loading-unloading cycles due to the shuttling function, whereas permanent changes are observed upon repeated deformations to high strains due to breakage of the mechanical bond upon dethreading of the ring from the axle. This response allows one, at least conceptually, to monitor the actual deformation of polymer materials and examine mechanical damage that was inflicted in the past on the basis of an optical signal.

Activation of the Catalytic Activity of Thrombin for Fibrin Formation by Ultrasound

The regulation of enzyme activity is a method to control biological function. We report two systems enabling the ultrasound-induced activation of thrombin, which is vital for secondary hemostasis. First, we designed polyaptamers, which can specifically bind to thrombin, inhibiting its catalytic activity. With ultrasound generating inertial cavitation and therapeutic medical focused ultrasound, the interactions between polyaptamer and enzyme are cleaved, restoring the activity to catalyze the conversion of fibrinogen into fibrin. Second, we used split aptamers conjugated to the surface of gold nanoparticles (AuNPs). In the presence of thrombin, these assemble into an aptamer tertiary structure, induce AuNP aggregation, and deactivate the enzyme. By ultrasonication, the AuNP aggregates reversibly disassemble releasing and activating the enzyme. We envision that this approach will be a blueprint to control the function of other proteins by mechanical stimuli in the sonogenetics field.

Tribochemistry, Mechanical Alloying, Mechanochemistry: What is in a Name?

Over the decades, the application of mechanical force to influence chemical reactions has been called by various names: mechanochemistry, tribochemistry, mechanical alloying, to name but a few. The evolution of these terms has largely mirrored the understanding of the field. But what is meant by these terms, why have they evolved, and does it really matter how a process is called? Which parameters should be defined to describe unambiguously the experimental conditions such that others can reproduce the results, or to allow a meaningful comparison between processes explored under different conditions? Can the information on the process be encoded in a clear, concise, and self-explanatory way? We address these questions in this Opinion contribution, which we hope will spark timely and constructive discussion across the international mechanochemical community.

Mechanochemically Triggered Topology Changes in Expanded Porphyrins

A hitherto unexplored class of molecules for molecular force probe applications are expanded porphyrins. This work proves that mechanical force is an effective stimulus to trigger the interconversion between Hückel and Möbius topologies in [28]hexaphyrin, making these expanded porphyrins suitable to act as conformational mechanophores operating at mild (sub-1 nN) force conditions. A straightforward approach based on distance matrices is proposed for the selection of pulling scenarios that promote either the planar Hückel topology or the three lowest lying Möbius topologies. This approach is supported by quantum mechanochemical calculations. Force distribution analyses reveal that [28]hexaphyrin selectively allocates the external mechanical energy to molecular regions that trigger Hückel-Möbius interconversions, explaining why certain pulling scenarios favor the Hückel two-sided topology and others favor Möbius single-sided topologies. The meso-substitution pattern on [28]hexaphyrin determines whether the energy difference between the different topologies can be overcome by mechanical activation.

The activation efficiency of mechanophores can be modulated by adjacent polymer composition

The activation efficiency of mechanophores in stress-responsive polymers is generally limited by the competing process of unspecific scission in other parts of the polymer chain. Here it is shown that the linker between the mechanophore and the polymer backbone determines the force required to activate the mechanophore. Using quantum chemical methods, it is demonstrated that the activation forces of three mechanophores (Dewar benzene, benzocyclobutene and gem-dichlorocyclopropane) can be adjusted over a range of almost 300% by modifying the chemical composition of the linker. The results are discussed in terms of changes in electron density, strain distribution and structural parameters during the rupture process. Using these findings it is straightforward to either significantly enhance or reduce the activation rate of mechanophores in stress-responsive materials, depending on the desired use case. The methodology is applied to switch a one-step "gating" of a mechanochemical transformation to a two-step process.

The many flavours of mechanochemistry and its plausible conceptual underpinnings

Mechanochemistry describes diverse phenomena in which mechanical load affects chemical reactivity. The fuzziness of this definition means that it includes processes as seemingly disparate as motor protein function, organic synthesis in a ball mill, reactions at a propagating crack, chemical actuation, and polymer fragmentation in fast solvent flows and in mastication. In chemistry, the rate of a reaction in a flask does not depend on how fast the flask moves in space. In mechanochemistry, the rate at which a material is deformed affects which and how many bonds break. In other words, in some manifestations of mechanochemistry, macroscopic motion powers otherwise endergonic reactions. In others, spontaneous chemical reactions drive mechanical motion. Neither requires thermal or electrostatic gradients. Distinct manifestations of mechanochemistry are conventionally treated as being conceptually independent, which slows the field in its transformation from being a collection of observations to a rigorous discipline. In this Review, we highlight observations suggesting that the unifying feature of mechanochemical phenomena may be the coupling between inertial motion at the microscale to macroscale and changes in chemical bonding enabled by transient build-up and relaxation of strains, from macroscopic to molecular. This dynamic coupling across multiple length scales and timescales also greatly complicates the conceptual understanding of mechanochemistry.

On the Electronic Structure Origin of Mechanochemically Induced Selectivity in Acid-Catalyzed Chitin Hydrolysis

Recently, mechanical ball milling was applied to chitin depolymerization. The mechanical activation afforded higher selectivity toward glycosidic bond cleavage over amide bond breakage. Hence, the bioactive N-acetylglucosamine (GlcNAc) monomer was preferentially produced over glucosamine. In this regard, the force-dependent mechanochemical activation-deactivation process in the relaxed and pulled GlcNAc dimer undergoing deacetylation and depolymerization reactions was studied. For the relaxed case, the activation energies of the rate-determining steps (RDS) proved that the two reactions could occur simultaneously. Mechanical forces associated with ball milling were approximated with linear pulling and were introduced explicitly in the RDS of both reactions through force-modified potential energy surface (FMPES) formalism. In general, as the applied pulling force increases, the activation energy of the RDS of deacetylation shows no meaningful change, while that of depolymerization decreases. This result is consistent with the selectivity exhibited in the experiment. Energy and structural analyses for the depolymerization showed that the activation can be attributed to a significant change in the glycosidic dihedral at the reactant state. A lone pair of the neighboring pyranose ring O adopts a syn-periplanar conformation relative to the glycosidic bond. This promotes electron donation to the σ*-orbital of the glycosidic bond, leading to activation. Consequently, the Brønsted-Lowry basicity of the glycosidic oxygen also increases, which can facilitate acid catalysis.

Empowering self-reporting polymer blends with orthogonal optical properties responsive in a broader force range

Self-reporting polymers, which can indicate damage with perceptible optical signals in a tailored force range, are useful as stress-sensitive sensors. We demonstrate a simple approach to realize this function by embedding two distinct mechanophores - rhodamine (Rh) and bis(adamantyl)-1,2-dioxetane (Ad), in polyurethane/polylactic acid blends. The deformed blends generate red coloration and red chemiluminescence. Such a unique dual-responsive behavior was evaluated by solid-state UV-vis spectroscopy, macroscopic tensile tests with in situ RGB and light intensity analyses, which supported a stress-correlated occurrence of the ring-opening of Rh, the scission of Ad and the fluorescence resonance energy transfer process between the respective mechanochemical species. Complementarity stemming from the difference in properties and manifestations of the two mechanophores is essential. That is, the more labile Rh allows shifting the appreciable optical changes to a much lower force threshold; the transient nature and high dynamic range of mechanochemiluminescence from Ad map in real time where and when many of the covalently incorporated dioxetane bonds break; besides, the disrupted yet non-scissile structure of Rh acts as a fluorescent acceptor to effectively harvest chemiluminescence from ruptured Ad. The current strategy is thus empowering multi-functional mechano-responsive polymers with greatly improved sensitivity and resolution for multimodal stress reporting.

Diselenide-Linked Polymers under Sonication

A series of Se-Se-linked polystyrenes have been synthesized and subjected to pulse sonication. Comprehensive investigations based on GPC measurements, derivatization experiments, and EPR spectroscopy verify the sonication-induced bond scission and metathesis of these polymeric diselenides. The metathesis kinetics and energy conversion efficiency by different stimuli including heating, light, and sonication are compared, which demonstrate that sonication can offer an alternative way to break the Se-Se bond and realize selective metathesis reactions between diselenide-linked polymers and small molecules. This fundamental study on sonochemistry of diselenide-centered polymers expands our knowledge of diselenide chemistry and mechanochemistry of dynamic covalent mechanophores, which may greatly advance the applications of diselenide-containing polymers.

The Mechanism of Flex-Activation in Mechanophores Revealed By Quantum Chemistry

Flex-activated mechanophores can be used for small-molecule release in polymers under tension by rupture of covalent bonds that are orthogonal to the polymer main chain. Using static and dynamic quantum chemical methods, we here juxtapose three different mechanical deformation modes in flex-activated mechanophores (end-to-end stretching, direct pulling of the scissile bonds, bond angle bendings) with the aim of proposing ways to optimize the efficiency of flex-activation in experiments. It is found that end-to-end stretching, which is a traditional approach to activate mechanophores in polymers, does not trigger flex-activation, whereas direct pulling of the scissile bonds or displacement of adjacent bond angles are efficient methods to achieve this goal. Based on the structural, energetic and electronic effects responsible for these observations, we propose ways of weakening the scissile bonds experimentally to increase the efficiency of flex-activation.

Tuning Single-Molecule Conductance in Metalloporphyrin-Based Wires via Supramolecular Interactions

Nature has developed supramolecular constructs to deliver outstanding charge-transport capabilities using metalloporphyrin-based supramolecular arrays. Herein we incorporate simple, naturally inspired supramolecular interactions via the axial complexation of metalloporphyrins into the formation of a single-molecule wire in a nanoscale gap. Small structural changes in the axial coordinating linkers result in dramatic changes in the transport properties of the metalloporphyrin-based wire. The increased flexibility of a pyridine-4-yl-methanethiol ligand due to an extra methyl group, as compared to a more rigid 4-pyridinethiol linker, allows the pyridine-4-yl-methanethiol ligand to adopt an unexpected highly conductive stacked structure between the two junction electrodes and the metalloporphyrin ring. DFT calculations reveal a molecular junction structure composed of a shifted stack of the two pyridinic linkers and the metalloporphyrin ring. In contrast, the more rigid 4-mercaptopyridine ligand presents a more classical lifted octahedral coordination of the metalloporphyrin metal center, leading to a longer electron pathway of lower conductance. This works opens to supramolecular electronics, a concept already exploited in natural organisms.

A Mechanochromic Hydrogen-Bonded Rotaxane

Tensile forces influence a variety of important biological processes and force sensors are required to study these processes in vivo. Current force sensors are often tailor-made for a specific application, or activate at much higher forces than those observed at the cellular or tissue level. A versatile force sensor, with tunable mechanical and optical properties, activated at low pN forces will be ideal. In this communication, a new mechanoresponsive fluorescent hydrogen-bonded rotaxane, built around a maleimide dye, is reported. Its force-sensing properties are demonstrated in a polyacrylamide gel, a synthetic model of living tissue.

Macrocyclic Dinuclear Palladium Complex as a Novel Doubly Threaded [3]Rotaxane Scaffold and Its Application as a Rotaxane Cross-Linker

A dinuclear Pd^II complex possessing a cyclic ligand was developed as a novel doubly threaded [3]rotaxane scaffold and applied as a rotaxane cross-linker reagent. The dinuclear complex (PdMC)₂ was prepared by one-step macrocyclization followed by the double palladation reaction. ¹ H NMR analysis and UV/Vis measurements revealed the formation of a doubly threaded pseudo[3]rotaxane by the complexation of (PdMC)₂ with 2 equivalents of 2,6-disubstituted pyridine 3 through double metal coordination. The treatment of (PdMC)₂ with 2 equivalents of 4-vinylpyridine (VP) afforded a doubly threaded [3]rotaxane cross-linker (PdMC-VP)₂ . Radical co-polymerization of VP and t-butylstyrene in the presence of (PdMC-VP)₂ afforded a stable rotaxane cross-linked polymer (RCP). An elastic RCP was also prepared by using n-butyl acrylate as a monomer. The obtained RCPs exhibited higher swelling ability and higher mechanical toughness compared with the corresponding covalent cross-linked polymers.

Rotation of a helical coordination polymer by mechanical grinding

Anisotropic cell volume expansion by mechanical grinding of the solid facilitates the concerted rotation of the photo-inert helical coordination polymer, which causes the misaligned arms containing olefin functional groups in the neighbouring strands to align to undergo [2+2] cycloaddition reaction in 83% yield.

Probing the Electrostatic Barrier of Tetrathiafulvalene Dications using a Tetra-stable Donor-Acceptor [2]Rotaxane

A tetra-stable donor-acceptor [2]rotaxane 1⋅4PF₆ has been synthesized. The dumbbell component is comprised of an oxyphenylene (OP), a tetrathiafulvalene (TTF), a monopyrrolo-TTF (MPTTF), and a hydroquinone (HQ) unit, which can act as recognition sites (stations) for the tetra-cationic cyclophane cyclobis(paraquat-p-phenylene) (CBPQT⁴⁺ ). The TTF and the MPTTF stations are located in the middle of the dumbbell component and are connected by a triethylene glycol (TEG) chain in such a way that the pyrrole moiety of the MPTTF station points toward the TTF station, while the TTF and MPTTF stations are flanked by the OP and HQ stations on their left hand side and right hand side, respectively. The [2]rotaxane was characterized in solution by ¹ H NMR spectroscopy and cyclic voltammetry. The spectroscopic data revealed that the majority (77 %) of the tetra-stable [2]rotaxane 1⁴⁺ exist as the translational isomer 1⋅MPTTF⁴⁺ in which the CBPQT⁴⁺ ring encircles the MPTTF station. The electrochemical studies showed that CBPQT⁴⁺ in 1⋅MPTTF⁴⁺ undergoes ring translation as result of electrostatic repulsion from the oxidized MPTTF unit. Following tetra-oxidation of 1⋅MPTTF⁴⁺ , a high-energy state of 1⁸⁺ was obtained (i.e., 1⋅TEG⁸⁺ ) in which the CBPQT⁴⁺ ring was located on the TEG linker connecting the di-oxidized TTF²⁺ and MPTTF²⁺ units. ¹ H NMR spectroscopy carried out in CD₃ CN at 298 K on a chemically oxidized sample of 1⋅MPTTF⁴⁺ revealed that the metastable state 1⋅TEG⁸⁺ is only short-lived with a lifetime of a few minutes and it was found that 70 % of the positively charged CBPQT⁴⁺ ring moved from 1⋅TEG⁸⁺ to the HQ station, while 30 % moved to the much weaker OP station. These results clearly demonstrate that the CBPQT⁴⁺ ring can cross both an MPTTF²⁺ and a TTF²⁺ electrostatic barrier and that the free energy of activation required to cross MPTTF²⁺ is ca. 0.5 kcal mol^-1 smaller as compared to TTF²⁺ .

A Catenane as a Mechanical Protecting Group

Mechanophores (mechanoresponsive molecules) offer great promises for the development of smart force-responsive materials. The activity of a mechanophore can be tuned by altering its structure or the composition of the actuating polymer. Here we show that a [2]catenane can act as a mechanical protecting group by diverting tensional forces away from a mechanically active functional group embedded in one of its rings. This property emerges from the mobility of the two rings of the catenane, which are able to rotate along each other until the tension equalizes over the entirety of the catenated framework. This approach provides a new way to control the mechanical activity of a mechanophore.

Expedient Synthesis of Heterobifunctional Triarylmethane Stoppers for Macromolecular Rotaxanes

Increasingly complex rotaxane-based molecular devices are interfaced with polymers and surfaces, but suitable bifunctional stoppering groups are lacking. Here, we report a two-step, high-yielding synthesis toward a new class of heterobifunctional triarylmethane stoppers. They possess hydroxyl and ester groups for further functionalization as well as halogen substituents conferring a diagnostic spectroscopic signature. Their utility was demonstrated with the synthesis of a chain-centered macromolecular rotaxane. This new stopper architecture should prove useful to connect rotaxanes with polymers and surfaces for applications in polymer mechanochemistry, single-molecule force spectroscopy, smart materials, and molecular machines.

Polymer mechanochemistry-enabled pericyclic reactions

Polymer mechanochemical pericyclic reactions are reviewed with regard to their structural features and substitution prerequisites to the polymer framework.

Mechanical activation of polymers containing two adjacent mechanophores

Polymers containing two adjacent mechanophores cleave at the same as a single-mechanophore chains.

Visualization of the slide-ring effect: a study on movable cross-linking points using mechanochromism

To evaluate the ‘slide-ring’ effect in a rotaxane cross-linked network, we incorporated mechanochromophores into static and rotaxane cross-linking points and compared the mechanochromisms exhibited by the obtained polymers.