Microneedle systems: cell, exosome, and nucleic acid based strategies

Cells, exosomes, and nucleic acids play crucial roles in biomedical engineering, holding substantial clinical potential. However, their utility is often hindered by various drawbacks, including cellular immunogenicity, and instability of exosomes and nucleic acids. In recent years, microneedle (MN) technology has revolutionized drug delivery by offering minimal invasiveness and remarkable versatility. MN has emerged as an ideal platform for the extraction, storage, and delivery of these biological components. This review presents a comprehensive overview of the historical progression and recent advances in the field of MN. Specifically, it highlights the current applications of cell-, exosome-, and nucleic acid-based MN systems, while presenting prevailing research challenges. Additionally, the review provides insights into the prospects of MN in this area, aiming to provide new ideas for researchers and facilitate the clinical translation of MN technology.

Site-Specifically Launched Microneedles for the Combined Treatment of Psoriasis-Diabetic Comorbidity

Psoriasis and diabetes are both common comorbidities for each other, where inflammation and insulin resistance act in a vicious cycle, driving the progression of disease through the activation of the NF-κB signaling pathway. Therefore, disrupting the linkage between inflammation and insulin resistance by inhibiting the NF-κB pathway presents a promising therapeutic strategy for addressing psoriasis-diabetic comorbidity. Herein, an open-loop therapy was developed by integrating microneedle-mediated short- and long-range missiles to target psoriasis and diabetes, respectively. The short-range missile (curcumin nanoparticle) could be stationed in the psoriatic skin for topical and prolonged antipsoriasis therapy, while the long-range missile (metformin) is capable of penetrating transdermal barriers to induce a systemic hypoglycemic effect. More attractively, the short- and long-range missiles could join hands to inhibit the NF-κB signaling pathway and diminish inflammation, effectively disrupting the crosstalk between inflammation and insulin resistance. Pharmacodynamic studies showed that this microneedle-mediated combination, possessing dual anti-inflammatory and antihyperglycemic properties, proves to be highly efficacious in alleviating typical symptoms and inflammatory response in both nondiabetic and diabetic mice with imiquimod (IMQ)-induced psoriasis models. Hence, the microneedle-mediated open-loop therapy shows great potential in the management of psoriasis-diabetes comorbidity.

Advances in Intelligent Stimuli-Responsive Microneedle for Biomedical Applications

Microneedles (MNs) are a new type of drug delivery method that can be regarded as an alternative to traditional transdermal drug delivery systems. Recently, MNs have attracted widespread attention for their advantages of effectiveness, safety, and painlessness. However, the functionality of traditional MNs is too monotonous and limits their application. To improve the efficiency of disease treatment and diagnosis by combining the advantages of MNs, the concept of intelligent stimulus-responsive MNs is proposed. Intelligent stimuli-responsive MNs can exhibit unique biomedical functions according to the internal and external environment changes. This review discusses the classification and principles of intelligent stimuli-responsive MNs, such as magnet, temperature, light, electricity, reactive oxygen species, pH, glucose, and protein. This review also highlights examples of intelligent stimuli-responsive MNs for biomedical applications, such as on-demand drug delivery, tissue repair, bioimaging, detection and monitoring, and photothermal therapy. These intelligent stimuli-responsive MNs offer the advantages of high biocompatibility, targeted therapy, selective detection, and precision treatment. Finally, the prospects and challenges for the application of intelligent stimuli-responsive MNs are discussed.

Nanobiotics and the One Health Approach: Boosting the Fight against Antimicrobial Resistance at the Nanoscale

Antimicrobial resistance (AMR) is a growing public health concern worldwide, and it poses a significant threat to human, animal, and environmental health. The overuse and misuse of antibiotics have contributed significantly and others factors including gene mutation, bacteria living in biofilms, and enzymatic degradation/hydrolyses help in the emergence and spread of AMR, which may lead to significant economic consequences such as reduced productivity and increased health care costs. Nanotechnology offers a promising platform for addressing this challenge. Nanoparticles have unique properties that make them highly effective in combating bacterial infections by inhibiting the growth and survival of multi-drug-resistant bacteria in three areas of health: human, animal, and environmental. To conduct an economic evaluation of surveillance in this context, it is crucial to obtain an understanding of the connections to be addressed by several nations by implementing national action policies based on the One Health strategy. This review provides an overview of the progress made thus far and presents potential future directions to optimize the impact of nanobiotics on AMR.

Prussian Blue nanoparticles: An FDA-approved substance that may quickly degrade at physiological pH

Prussian blue (PB) is a coordination polymer based on the Fe^2+…CN^…Fe³⁺ sequence. It is an FDA-approved drug, intended for oral use at the acidic pH of the stomach and of most of the intestine track. However, based on FDA approval, a huge number of papers proposed the use of PB nanoparticles (PBnp) under "physiological conditions", meaning pH buffered at 7.4 and high saline concentration. While most of these papers report that PBnp are stable at this pH, a small number of papers describes instead PBnp degradation at the same or similar pH values, i.e. in the 7-8 range. Here we give a definitively clear picture: PBnp are intrinsically unstable at pH ≥ 7, degrading with the fast disappearance of their 700 nm absorption band, due to the formation of OH^- complexes from the labile Fe³⁺ centers. However, we show also that the presence of a polymeric coating (PVP) can protect PBnp at pH 7.4 for over 24 h. Moreover, we demonstrate that when "physiological conditions" include serum, a protein corona is rapidly formed on PBnp, efficiently avoiding degradation. We also show that the viability of PBnp-treated EA.hy926, NCI-H1299, and A549 cells is not affected in a wide range of conditions that either prevent or promote PBnp degradation.

Hybrid microneedle arrays for antibiotic and near-IR photothermal synergistic antimicrobial effect against Methicillin-Resistant Staphylococcus aureus

The rise of antibiotic-resistant skin and soft tissue infections (SSTIs) necessitates the development of novel treatments to improve the efficiency and delivery of antibiotics. The incorporation of photothermal agents such as plasmonic nanoparticles (NPs) improves the antibacterial efficiency of antibiotics through synergism with elevated temperatures. Hybrid microneedle (MN) arrays are promising local delivery platforms that enable co-therapy with therapeutic and photothermal agents. However, to-date, the majority of hybrid MNs have focused on the potential treatment of skin cancers, while suffering from the shortcoming of the intradermal release of photothermal agents. Here, we developed hybrid, two-layered MN arrays consisting of an outer water-soluble layer loaded with vancomycin (VAN) and an inner water-insoluble near-IR photothermal core. The photothermal core consists of flame-made plasmonic Au/SiO2 nanoaggregates and polymethylmethacrylate (PMMA). We analyzed the effect of the outer layer polymer, polyvinyl alcohol (PVA) and polyvinylpyrrolidone (PVP), on MN morphology and performance. Hybrid MNs produced with 30 wt% PVA contain a highly drug-loaded outer shell allowing for the incorporation of VAN concentrations up to 100 mg g-1 and temperature increases up to 60 °C under near-IR irradiation while showing sufficient mechanical strength for skin insertion. Furthermore, we studied the combinatorial effect of VAN and heat on the growth inhibition of methicillin-resistant Staphylococcus aureus (MRSA) showing synergistic inhibition between VAN and heat above 55 °C for 10 min. Finally, we show that treatment with hybrid MN arrays can inhibit the growth of MRSA due to the synergistic interaction of heat with VAN reducing the bacterial survival by up to 80%. This proof-of-concept study demonstrates the potential of hybrid, two-layered MN arrays as a novel treatment option for MRSA-associated skin infections.

Controlled degradation of polycaprolactone-based micropillar arrays

Herein we demonstrate the fabrication of arrays of micropillars, achieved through the combination of direct laser writing and nanoimprint lithography. By combining two diacrylate monomers, polycaprolactone dimethacrylate (PCLDMA) and 1,6-hexanediol diacrylate (HDDA), two copolymer formulations that, owing to the varying ratios of the hydrolysable ester functionalities present in the polycaprolactone moiety, can be degraded in the presence of base in a controllable manner. As such, the degradation of the micropillars can be tuned over several days as a function of PCLDMA concentration within the copolymer formulations, and the topography greatly varied over a short space of time, as visualised using scanning electron microscopy and atomic force microscopy. Crosslinked neat HDDA was used as a control material, demonstrating that the presence of the PCL was responsible for the ability of the microstructures to degrade in the controlled manner. In addition, the mass loss of the crosslinked materials was minimal, demonstrating the degradation of microstructured surfaces without loss of bulk properties was possible. Moreover, the compatibility of these crosslinked materials with mammalian cells was explored. The influence of both indirect and direct contact of the materials with A549 cells was assessed by profiling indices reflective of cytotoxicity such as morphology, adhesion, metabolic activity, oxidative balance, and release of injury markers. No significant changes in the aforementioned profile were observed in the cells cultured under these conditions for up to 72 h, with the cell-material interaction suggesting these materials may have potential in microfabrication contexts towards biomedical application purposes.

Photoresponsive polymeric microneedles: An innovative way to monitor and treat diseases

Microneedles (MN) technology is an emerging technology for the transdermal delivery of therapeutics. When combined with photoresponsive (PR) materials, MNs can deliver therapeutics precisely and effectively with enhanced efficacy or synergistic effects. This review systematically summarizes the therapeutic applications of PRMNs in cancer therapy, wound healing, diabetes treatment, and diagnostics. Different PR approaches to activate and control the release of therapeutic agents from MNs are also discussed. Overall, PRMNs are a powerful tool for stimuli-responsive controlled-release therapeutic delivery to treat various diseases.

PVP-microneedle array for drug delivery: mechanical insight, biodegradation, and recent advances

Microneedle arrays are micron-sized needles usually attached to a supporting base or patch facilitated drug delivery for systemic effects. Polyvinylpyrrolidone (PVP) is a lactam polymer containing an internal amide linkage. Because of its versatility and biocompatibility, it has been widely utilized to treat several skin, bone and eye problems. Due to its specific and unique properties, the researchers realize its utility as a polymer of tremendous potential. PVP-based dissolvable microneedles have widely been utilized as a carrier for delivering DNAs, proteins, vitamins, and several biological macromolecules transdermally. However, it does not get biodegraded into the body. Therefore, the presence of its fragments in the body post-treatment needs proper justification. The adequate justification for the fate of the fragment's end products in the body will allow even better utilization of PVP. This review analyses and illustrates various experimental findings to highlight the most recent advancements and applications of PVP microneedles in drug delivery systems and cosmetology and the potential for PVP microneedles in treating dermal and systemic disorders. This review presents the expected mode of PVP biodegradation in aqueous and soil environments as a waste material, its inertness, biocompatibility, and the importance of PVP as a fabricating material, pharmaceutical uses, and non-toxic profile.

Flexible polymeric patch based nanotherapeutics against non-cancer therapy

Flexible polymeric patches find widespread applications in biomedicine because of their biological and tunable features including excellent patient compliance, superior biocompatibility and biodegradation, as well as high loading capability and permeability of drug. Such polymeric patches are classified into microneedles (MNs), hydrogel, microcapsule, microsphere and fiber depending on the formed morphology. The combination of nanomaterials with polymeric patches allows for improved advantages of increased curative efficacy and lowered systemic toxicity, promoting on-demand and regulated drug administration, thus providing the great potential to their clinic translation. In this review, the category of flexible polymeric patches that are utilized to integrate with nanomaterials is briefly presented and their advantages in bioapplications are further discussed. The applications of nanomaterials embedded polymeric patches in non-cancerous diseases were also systematically reviewed, including diabetes therapy, wound healing, dermatological disease therapy, bone regeneration, cardiac repair, hair repair, obesity therapy and some immune disease therapy. Alternatively, the limitations, latest challenges and future perspectives of such biomedical therapeutic devices are addressed.

•

The most explored polymeric patches, such as microneedle, hydrogel, microsphere, microcapsule, and fiber are summarized.

•

Polymeric patches integrated with a diversity of nanomaterials are systematically overviewed in non-cancer therapy.

•

The future prospective for the development of polymeric patch based nanotherapeutics is discussed.

Highly Efficient Near-IR Photothermal Microneedles with Flame-Made Plasmonic Nanoaggregates for Reduced Intradermal Nanoparticle Deposition

Near-infrared (NIR) photothermal therapy by microneedles (MNs) exhibits high potential against skin diseases. However, high costs, photobleaching of organic agents, low long-term stability, and potential nanotoxicity limit the clinical translation of photothermal MNs. Here, photothermal MNs are developed by utilizing Au nanoaggregates made by flame aerosol technology and incorporated in water-insoluble polymer matrix to reduce intradermal nanoparticle (NP) deposition. The individual Au interparticle distance and plasmonic coupling within the nanoaggregates are controlled by the addition of a spacer during their synthesis rendering the Au nanoaggregates highly efficient NIR photothermal agents. In situ aerosol deposition of Au nanoaggregates on MN molds results in the fabrication of photothermal MNs with thin plasmonic layers. The photothermal performance of these MN arrays is compared to ones made by three methods utilizing NP dispersions, and it is found that similar temperatures are reached with 28-fold lower Au mass due to reduced light scattering losses of the thin layers. Finally, all developed photothermal MN arrays here cause clinically relevant hyperthermia at benign laser intensities while reducing intradermal NP deposition 127-fold compared to conventional MNs made with water-soluble polymers. Such rational design of photothermal MNs requiring low laser intensities and minimal NP intradermal accumulation sets the basis for their safe clinical translation.

Significance of Capping Agents of Colloidal Nanoparticles from the Perspective of Drug and Gene Delivery, Bioimaging, and Biosensing: An Insight

The over-growth and coagulation of nanoparticles is prevented using capping agents by the production of stearic effect that plays a pivotal role in stabilizing the interface. This strategy of coating the nanoparticles’ surface with capping agents is an emerging trend in assembling multipurpose nanoparticles that is beneficial for improving their physicochemical and biological behavior. The enhancement of reactivity and negligible toxicity is the outcome. In this review article, an attempt has been made to introduce the significance of different capping agents in the preparation of nanoparticles. Most importantly, we have highlighted the recent progress, existing roadblocks, and upcoming opportunities of using surface modified nanoparticles in nanomedicine from the drug and gene delivery, bioimaging, and biosensing perspectives.

Research progress on detachable microneedles for advanced applications

INTRODUCTION

Microneedles (MNs) have undergone great advances in transdermal drug delivery, and commercialized MN applications are currently available in vaccination and cosmetic products. Despite the development of MN technologies, common limitations of MN products still exist. Typical MN patches are applied to target tissues, where the substrate of an MN patch must remain until the drug is delivered, which reduces patients' compliance and hinders the applicability of the MN technique to many diseases in various tissues. MN research is ongoing to solve this issue.

AREAS COVERED

Most recent MNs developed by combining various biomaterials with appropriate fabrication processes are detachable MNs (DeMNs). Because of advances in biomaterials and fabrication techniques, various DeMNs have been rapidly developed. In this review, we discuss four types of DeMN: substrate-separable, multi-layered, crack-inducing, and shell DeMN. These DeMNs deliver various therapeutic agents ranging from small- and large-molecular-weight drugs to proteins and even stem cells for regeneration therapy. Furthermore, DeMNs are applied to skin as well as non-transdermal tissues.

EXPERT OPINION

It has become increasingly evident that novel MN technologies can be expected in terms of designs, fabrication methods, materials, and even possible application sites given the recent advances in DeMNs.

An update on biomaterials as microneedle matrixes for biomedical applications

Microneedles (MNs) have been developed for various applications such as drug delivery, cosmetics, diagnosis, and biosensing. To meet the requirements of MNs used in these areas, numerous materials have been used for the fabrication of MNs. However, MNs will be exposed to skin tissues after piercing the stratum corneum barrier. Thus, it is necessary to ensure that the matrix materials of MNs have the characteristics of low toxicity, good biocompatibility, biodegradability, and sufficient mechanical properties for clinical application. In this review, the matrix materials currently used for preparing MNs are summarized and reviewed in terms of these factors. In addition, MN products used on the market and their applications are summarized in the end. This work may provide some basic information to researchers in the selection of MN matrix materials and in developing new materials.

Dual-Drug Loaded Separable Microneedles for Efficient Rheumatoid Arthritis Therapy

Although the inhibitors of the interleukin-6 receptor (IL-6R) and tumor necrosis factor-α (TNF-α) have achieved a certain success in the clinical treatment of rheumatoid arthritis (RA), great effort should be made to overcome side effects and to improve patient compliance. The present research aimed to address these problems by the co-delivery of tocilizumab (TCZ)—an inhibitor of IL-6R—and an aptamer Apt1-67, which specifically inhibits TNF receptor 1 via separable microneedles (MN). MN were featured with a sustained release of TCZ from needle tips and a rapid release of Apt1-67 from needle bodies by using methacrylate groups grafted hyaluronic acid as the fillings of needle tips and polyvinyl alcohol/polyvinyl pyrrolidone as the fillings of needle bodies. Our results demonstrated that TCZ and Apt1-67 were distributed in MN as expected, and they could be released to the surroundings in the skin. In vivo studies revealed that combined medication via MN (TCZ/Apt1-67@MN) was superior to MN loaded with a single drug. Compared with subcutaneous injection, TCZ/Apt1-67@MN was of great advantage in inhibiting bone erosion and alleviating symptoms of CIA mice. This study not only provides a novel approach for combined medication with different release properties but also supplies a strategy for improving drug efficacy.

A wearable gamma radiation-responsive granulocyte colony-stimulating factor microneedle system protecting against ionizing radiation-induced injury

Exposure to a nuclear accident or a radiological attack may cause serious death events due to ionizing radiation-induced injury and acute radiation syndrome (ARS). Recombinant human granulocyte colony-stimulating factor (G-CSF) is now used for the treatment of ARS. However, the current injection formulation might not ensure treatment as early as possible after a nuclear accident, resulting in a decrease in therapeutic efficiency. In the present study, we have developed a G-CSF wearable system (GWS) consisting of a commercial microchip, a temperature sensor, a gamma-ray detection sensor, a flexible heater, and a G-CSF temperature-sensitive microneedle (GTSMN) patch. G-CSF-containing hyaluronic acid solutions were cast into the mold to obtain G-CSF microneedles (GMNs), which were coated with a temperature-sensitive layer of dodecanoic acid-cetylamine salt to obtain GTSMNs. The flexible heater was prepared by jet printing Ag nanoparticle inks. The GWS and its components are explored and optimized in the aspects of electronics, mechanics, heat transfer and drug diffusion. The γ radiation signal is sensitively monitored by the GWS. The wearable G-CSF system immediately releases G-CSF into the body in response to signal feedback and provides maximal protection against ionizing radiation-induced injury. Therefore, the GWS is a promising wearable system against emergent ionizing radiation injury. STATEMENT OF SIGNIFICANCE: Ionizing radiation-induced injury is always the very important public health problem all the global people care. Some medicines have been applied to protect the body from the injury. Unfortunately, sometimes the injuries accidently happen and the medicines cannot be administered in time, leading to serious acute radiation syndrome. Here, we design a wearable system loading G-CSF that has been approved by FDA to protect the body from ionizing radiation-induced injury. This system consists of a commercial microchip, a temperature sensor, a Gamma-ray detection sensor, a flexible heater, and a G-CSF temperature-sensitive microneedle patch. It can monitor γ radiation and immediately release G-CSF into the body to protect the body to the maximal extent. Therefore, the system is a promising wearable medical device against emergent ionizing radiation injury.

Recent advances in polymer microneedles for drug transdermal delivery: Design strategies and applications

In recent years, the transdermal drug delivery based on microneedles (MNs) technology has received extensive attention, which offers a safer and painless alternative to hypodermic needle injection. They can pierce the stratum corneum and deliver drugs to the epidermis and dermis-structures of skin, showing prominent properties such as minimally invasive, bypassing first-pass metabolism, and self-administered. A range of materials have been used to fabricate MNs, such as silicon, metal, glass, and polymers. Among them, polymer MNs have gained increasing attention from pharmaceutical and cosmetic companies as one of the promising drug delivery methods. Microneedle products have recently become available on the market, and some of them are under evaluation for efficacy and safety. This paper focuses on current state of polymer MNs in the drug transdermal delivery. The materials and methods for the fabrication of polymer MNs and their drug administration are described. The recent progresses of polymer MNs for treatment of cancer, vaccine delivery, blood glucose regulation, androgenetic alopecia, obesity, tissue healing, myocardial infarction and gout are reviewed. The challenges of MNs technology are summarized and the future development trend of MNs is also prospected. This article is protected by copyright. All rights reserved.

Studies on local anesthetic lidocaine hydrochloride delivery via photo-triggered implantable polymeric microneedles as a patient-controlled transdermal analgesia system

This study aimed to develop photo-triggered implantable polymeric microneedles (MNs) for successful drug delivery in a transdermal analgesia system. The prepared iron oxide nanoparticles (Fe₃O₄NPs) were coated with polydopamine (PDA) followed by polyvinylpyrrolidone (PVP) and polycaprolactone (PCL). While the PCL/PVP-Fe₃O₄NPs synthesis, the absorption band of PVP at 1656 cm^-1 shifted to 1665 cm^-1 which indicate the presence of interaction between Fe⁺ and C = O groups. The size and morphology of PCL/PVP-Fe₃O₄NPs were examined by scanning electron microscope and transmission electron microscope (SEM and TEM) analysis. The results confirmed that the prepared PCL/PVP-Fe₃O₄NPs were spherical with sizes ranging from 9 to 11 nm. The lidocaine hydrochloride content in the microneedles was 3.72 ± 0.31 mg and A + 2.2S ≤ L representing that the drug was uniformly distributed. The insertion ability of lidocaine hydrochloride@PCL/PVP-Fe₃O₄NPs-DMNs was tested by porcine skin. The results demonstrated outstanding insertion ability and potential for drug delivery. In addition, near-infrared (NIR) irradiation has the potential to penetrate the skin and enhance lidocaine hydrochloride-releasing activity. The in vivo experimental data confirmed that lidocaine hydrochloride@PCL/PVP-Fe₃O₄NPs-DMNs allowed for painless drug delivery by breaking the barrier of the stratum corneum. To conclude, lidocaine hydrochloride can be safely delivered through the transdermal analgesic system, with a quick onset time.

Bioimaging of Dissolvable Microneedle Arrays: Challenges and Opportunities

The emergence of microneedle arrays (MNAs) as a novel, simple, and minimally invasive administration approach largely addresses the challenges of traditional drug delivery. In particular, the dissolvable MNAs act as a promising, multifarious, and well-controlled platform for micro-nanotransport in medical research and cosmetic formulation applications. The effective delivery mostly depends on the behavior of the MNAs penetrated into the body, and accurate assessment is urgently needed. Advanced imaging technologies offer high sensitivity and resolution visualization of cross-scale, multidimensional, and multiparameter information, which can be used as an important aid for the evaluation and development of new MNAs. The combination of MNA technology and imaging can generate considerable new knowledge in a cost-effective manner with regards to the pharmacokinetics and bioavailability of active substances for the treatment of various diseases. In addition, noninvasive imaging techniques allow rapid, receptive assessment of transdermal penetration and drug deposition in various tissues, which could greatly facilitate the translation of experimental MNAs into clinical application. Relying on the recent promising development of bioimaging, this review is aimed at summarizing the current status, challenges, and future perspective on in vivo assessment of MNA drug delivery by various imaging technologies.

Rational design of flexible microneedles coupled with CaO2@PDA-loaded nanofiber films for skin wound healing on diabetic rats

Skin ulcers is one of the complications of diabetes. At present, the treatment of diabetic skin wound is still not satisfactory, and the efficiency of drug delivery is limited by the depth...

Transdermal delivery of multifunctional CaO2@Mn-PDA nanoformulations by microneedles for NIR-induced synergistic therapy against skin melanoma

The development of multifunctional nanoformulations (NFs) include several features in a single nanosystem for these devices to overcome the disadvantages of inefficiency and undesirable toxicity of traditional therapies and provide new opportunities in the management of tumors. Herein, multifunctional CaO₂@Mn-PDA NFs with a core-shell structure, integrating the photothermal conversion properties of Mn-PDA, the chemodynamic properties of doped Mn ions, and relieving hypoxia in the tumor microenvironment (TME) were developed. The as-fabricated CaO₂@Mn-PDA NFs were embedded in microneedles (MNs) for transdermal delivery into tumor sites, leading to the generation of a new minimally invasive and synergistic therapeutic strategy against skin melanoma. Under near-infrared (NIR) light irradiation, the CaO₂@Mn-PDA NFs exhibited a synergistic therapeutic effect, including photothermal therapy (PTT), chemodynamic therapy (CDT), and modulating hypoxia due to their high photothermal conversion efficiency, boosted intracellular production of reactive oxygen species, excellent chemodynamic reactions, etc. Therefore, the developed MN platform, which can build implanted multifunctional characteristics for on-demand NIR-induced synergistic therapy, have a bright future in tumor suppression.

A carbonized wormwood modified photothermal microneedle patch for the repair of damaged skeletal muscles

In this study, we aimed to achieve an efficient repair of damaged skeletal muscles using polyvinyl alcohol (PVA) soluble microneedle patches (MNP) loaded with carbonized wormwood and prostaglandin E2 (inflammatory factors). The introduction of carbonized wormwood imparted the MNP with near-infrared light heating characteristics that improved the efficiency of prostaglandin E2 delivery while also promoting circulation in the damaged muscle area. Our experimental results showed that, compared with the classical moxibustion treatment, the system could more quickly restore muscle strength and the cross-sectional area of muscle bundle fibers in a mouse model of muscular injury. In addition, it could also successfully induce the proliferation and differentiation of muscle stem cells to effectively repair injured muscle tissues. Above all, this light-controlled photothermal MN (microneedle) drug-delivery system avoided the common problems of traditional moxibustion such as large levels of smoke, slow efficacy and risk of scalding. Collectively, we put forward a safe, accurate and efficient approach for skeletal muscle damage treatment using carbonized wormwood.

Wearable Glucose Monitoring and Implantable Drug Delivery Systems for Diabetes Management

The global cost of diabetes care exceeds $1 trillion each year with more than $327 billion being spent in the United States alone. Despite some of the advances in diabetes care including continuous glucose monitoring systems and insulin pumps, the technology associated with managing diabetes has largely remained unchanged over the past several decades. With the rise of wearable electronics and novel functional materials, the field is well-poised for the next generation of closed-loop diabetes care. Wearable glucose sensors implanted within diverse platforms including skin or on-tooth tattoos, skin-mounted patches, eyeglasses, contact lenses, fabrics, mouthguards, and pacifiers have enabled noninvasive, unobtrusive, and real-time analysis of glucose excursions in ambulatory care settings. These wearable glucose sensors can be integrated with implantable drug delivery systems, including an insulin pump, glucose responsive insulin release implant, and islets transplantation, to form self-regulating closed-loop systems. This review article encompasses the emerging trends and latest innovations of wearable glucose monitoring and implantable insulin delivery technologies for diabetes management with a focus on their advanced materials and construction. Perspectives on the current unmet challenges of these strategies are also discussed to motivate future technological development toward improved patient care in diabetes management.

Microneedles for drug delivery: recent advances in materials and geometry for preclinical and clinical studies

INTRODUCTION

A microneedle array patch (MAP) has been studied as a means for delivering drugs or vaccines and has shown superior delivery efficiency compared to the conventional transdermal drug delivery system (TDD). This paper reviews recent advancements in the development of MAPs, with a focus on their size, shapes, and materials in preclinical and clinical studies for pharmaceutics.

AREA COVERED

We classified MAPs for drug delivery into four types: coated, dissolving, separable, and swellable. We covered their recent developments in materials and geometry in preclinical and clinical studies.

EXPERT OPINION

The design of MAPs needs to be determined based on what properties would be effective for the target diseases and purposes. In addition, in preclinical studies, it is necessary to consider not only the novelty of the formulations but also the feasibility of clinical application. Currently, clinical studies of microneedles loaded with various drugs and vaccines are in progress. When the regulation of pharmaceutical microneedles is established and more clinical studies are published, more drugs will be developed as microneedle products and clinical research will proceed. With these considerations, the microneedle array patch will be a better option for drug delivery.

The role of microneedle arrays in drug delivery and patient monitoring to prevent diabetes induced fibrosis

Diabetes affects approximately 450 million adults globally. If not effectively managed, chronic hyperglycaemia causes tissue damage that can develop into fibrosis. Fibrosis leads to end-organ complications, failure of organ systems occurs, which can ultimately cause death. One strategy to tackle end-organ complications is to maintain normoglycaemia. Conventionally, insulin is administered subcutaneously. Whilst effective, this delivery route shows several limitations, including pain. The transdermal route is a favourable alternative. Microneedle (MN) arrays are minimally invasive and painless devices that can enhance transdermal drug delivery. Convincing evidence is provided on MN-mediated insulin delivery. MN arrays can also be used as a diagnostic tool and monitor glucose levels. Furthermore, sophisticated MN array-based systems that integrate glucose monitoring and drug delivery into a single device have been designed. Therefore, MN technology has potential to revolutionise diabetes management. This review describes the current applications of MN technology for diabetes management and how these could prevent diabetes induced fibrosis.

Polymeric microneedle‐mediated sustained release systems: Design strategies and promising applications for drug delivery

Parenteral sustained release drug formulations, acting as preferable platforms for long-term exposure therapy, have been wildly used in clinical practice. However, most of these delivery systems must be given by hypodermic injection. Therefore, issues including needle-phobic, needle-stick injuries and inappropriate reuse of needles would hamper the further applications of these delivery platforms. Microneedles (MNs) as a potential alternative system for hypodermic needles can benefit from minimally invasive and self-administration. Recently, polymeric microneedle-mediated sustained release systems (MN@SRS) have opened up a new way for treatment of many diseases. Here, we reviewed the recent researches in MN@SRS for transdermal delivery, and summed up its typical design strategies and applications in various diseases therapy, particularly focusing on the applications in contraception, infection, cancer, diabetes, and subcutaneous disease. An overview of the present clinical translation difficulties and future outlook of MN@SRS was also provided.

The impact of chemical engineering and technological advances on managing diabetes: present and future concepts

Monitoring blood glucose levels for diabetic patients is critical to achieve tight glycaemic control. As none of the current antidiabetic treatments restore lost functional β-cell mass in diabetic patients, insulin injections and the use of insulin pumps are most widely used in the management of glycaemia. The use of advanced and intelligent chemical engineering, together with the incorporation of micro- and nanotechnological-based processes have lately revolutionized diabetic management. The start of this concept goes back to 1974 with the description of an electrode that repeatedly measures the level of blood glucose and triggers insulin release from an infusion pump to enter the blood stream from a small reservoir upon need. Next to the insulin pumps, other drug delivery routes, including nasal, transdermal and buccal, are currently investigated. These processes necessitate competences from chemists, engineers-alike and innovative views of pharmacologists and diabetologists. Engineered micro and nanostructures hold a unique potential when it comes to drug delivery applications required for the treatment of diabetic patients. As the technical aspects of chemistry, biology and informatics on medicine are expanding fast, time has come to step back and to evaluate the impact of technology-driven chemistry on diabetics and how the bridges from research laboratories to market products are established. In this review, the large variety of therapeutic approaches proposed in the last five years for diabetic patients are discussed in an applied context. A survey of the state of the art of closed-loop insulin delivery strategies in response to blood glucose level fluctuation is provided together with insights into the emerging key technologies for diagnosis and drug development. Chemical engineering strategies centered on preserving and regenerating functional pancreatic β-cell mass are evoked in addition as they represent a permanent solution for diabetic patients.

Build an implanted "arsenal": detachable microneedles for NIR-triggered cancer photothermo-chemotherapy

The current trend in tumor research is shifting from monotherapy to multimodal therapy. However, how to achieve on-demand drug delivery and minimize the invasiveness of treatment are still big challenges. Herein, we present a detachable microneedles (MNs) system, which consists of polycaprolactone (PCL) needles and polyvinylpyrrolidone/poly (vinyl alcohol) substrate, to build an implanted drug depot for on-demand photothermo-chemotherapy. Owing to the dissolvability of the substrate, detachable MNs can intradermally implant PCL needles loaded with photothermal conversion agent Prussian blue nanocubes (PB NCs) and chemotherapeutics doxorubicin hydrochloride (Dox·HCl). Once near-infrared light irradiates, PB NCs could translate light to local regional hyperthermia, which not only ablates cancer cells but also meltPCL to accelerate the diffusion of Dox·HCl. These MNs displayed a stable and repeatable photothermal effect under NIR irradiation. The ex vivo experiments using isolated swine skin demonstrated the as needed Dox·HCl delivery triggered by NIR light. Moreover, the robust antitumor efficacy of the MN system was proved in KB tumor-bearing nude mice under three timed NIR irradiation. Therefore, the developed detachable MNs which could build implanted "arsenal" for on-demand photothermo-chemotherapy have a bright future in tumor suppression.

Fabrication of Rapidly Separable Microneedles for Transdermal Delivery of Metformin on Diabetic Rats

In this work, the rapidly separable microneedles (MNs) consisted of needle-tips and supporting bases have been fabricated by a step-by-step coating method. Poly (vinyl alcohol) (PVA) have been used to prepare the needle-tips of MNs in which they are capped on the solvable supporting bases consisted of sodium bicarbonate, poly (vinyl pyrolidone) (PVP), and tartaric acid (TA) (NaHCO₃/PVP/TA). After insertion into the skin, the needle-tips can be separated rapidly from the patches within 90 s due to the generation of air bubbles in the supporting bases by the reaction between NaHCO₃ and TA after absorption of tissue fluid, leading to the needle-tips remaining in the skin tissue. Metformin, a hypoglycemic drug, encapsulated in the needle-tips of MNs can be released due to swelling and decomposition of PVA by the absorption of tissue fluid. To investigate the pharmacological effect via transdermal delivery route, metformin-loaded MNs are applied on the diabetic SD rats induced by streptozotocin (STZ). They exhibit a longer hypoglycemic effect in vivo than that of subcutaneous injection. These results indicated the as-fabricated rapidly separable MNs present a promising platform for transdermal delivery of drugs against diabetic patients.

Engineering Microneedle Patches for Improved Penetration: Analysis, Skin Models and Factors Affecting Needle Insertion

Transdermal microneedle (MN) patches are a promising tool used to transport a wide variety of active compounds into the skin. To serve as a substitute for common hypodermic needles, MNs must pierce the human stratum corneum (~ 10 to 20 µm), without rupturing or bending during penetration. This ensures that the cargo is released at the predetermined place and time. Therefore, the ability of MN patches to sufficiently pierce the skin is a crucial requirement. In the current review, the pain signal and its management during application of MNs and typical hypodermic needles are presented and compared. This is followed by a discussion on mechanical analysis and skin models used for insertion tests before application to clinical practice. Factors that affect insertion (e.g., geometry, material composition and cross-linking of MNs), along with recent advancements in developed strategies (e.g., insertion responsive patches and 3D printed biomimetic MNs using two-photon lithography) to improve the skin penetration are highlighted to provide a backdrop for future research.

Solvent-Free Polycaprolactone Dissolving Microneedles Generated via the Thermal Melting Method for the Sustained Release of Capsaicin

(1) Background: Dissolving microneedles (DMNs), a transdermal drug delivery system, have been developed to treat various diseases in a minimally invasive, painless manner. However, the currently available DMNs are based on burst release systems due to their hydrophilic backbone polymer. Although hydrophobic biodegradable polymers have been employed on DMNs for sustained release, dissolution in an organic solvent is required for fabrication of such DMNs. (2) Method: To overcome the aforementioned limitation, novel separable polycaprolactone (PCL) DMNs (SPCL-DMNs) were developed to implant a PCL-encapsulated drug into the skin. PCL is highly hydrophobic, degrades over a long time, and has a low melting point. Under thermal melting, PCL encapsulated capsaicin and could be fabricated into a DMN without the risk of toxicity from an organic solvent. (3) Results: Optimized SPCL-DMNs, containing PCL (height 498.3 ± 5.8 µm) encapsulating 86.66 ± 1.13 µg capsaicin with a 10% (w/v) polyvinyl alcohol and 20% (w/v) polyvinylpyrrolidone mixture as a base polymer, were generated. Assessment of the drug release profile revealed that this system could sustainably release capsaicin for 15 days from PCL being implanted in porcine skin. (4) Conclusion: The implantable SPCL-DMN developed here has the potential for future development of toxicity-free, sustained release DMNs.

Bioresponsive Functional Phenylboronic Acid-Based Delivery System as an Emerging Platform for Diabetic Therapy

The glucose-sensitive self-adjusting drug delivery system simulates the physiological model of the human pancreas-secreting insulin and then precisely regulates the release of hypoglycemic drugs and controls the blood sugar. Thus, it has good application prospects in the treatment of diabetes. Presently, there are three glucose-sensitive drug systems: phenylboronic acid (PBA) and its derivatives, concanavalin A (Con A), and glucose oxidase (GOD). Among these, the glucose-sensitive polymer carrier based on PBA has the advantages of better stability, long-term storage, and reversible glucose response, and the loading of insulin in it can achieve the controlled release of drugs in the human environment. Therefore, it has become a research hotspot in recent years and has been developed very rapidly. In order to further carry out a follow-up study, we focused on the development process, performance, and application of PBA and its derivatives-based glucose-sensitive polymer drug carriers, and the prospects for the development of this field.

Microneedles for Extended Transdermal Therapeutics: A Route to Advanced Healthcare

Sustained release of drugs over a pre-determined period is required to maintain an effective therapeutic dose for variety of drug delivery applications. Transdermal devices such as polymeric microneedle patches and other microneedle-based devices have been utilized for sustained release of their payload. Swift clearing of drugs can be prevented either by designing a slow-degrading polymeric matrix or by providing physiochemical triggers to different microneedle-based devices for on-demand release. These long-acting transdermal devices prevent the burst release of drugs. This review highlights the recent advances of microneedle-based devices for sustained release of vaccines, hormones, and antiretrovirals with their prospective safe clinical translation.

Nanoparticles-encapsulated polymeric microneedles for transdermal drug delivery

Polymeric microneedles (MNs) have been leveraged as a novel transdermal drug delivery platform for effective drug permeation, which were widely used in the treatment of various diseases. However, issues including limited loading capacity of hydrophobic drugs, uncontrollable drug release rates, and monotonic therapeutic strategy hamper the further application of polymeric MNs. As a recent emerging research topic, drawing inspiration from the ways that nanomedicine integrated with MNs have opened new avenues for disease therapy. In this review, we examined the recent studies employing nanoparticles (NPs)-encapsulated polymeric MNs (NPs@MNs) for transdermal delivery of various therapeutic cargos, particularly focused on the application of NPs@MNs for diabetes therapy, infectious disease therapy, cancer therapy, and other dermatological disease therapy. We also provided an overview of the clinical potential and future translation of NPs@MNs.

Fabrication of Tip-Hollow and Tip-Dissolvable Microneedle Arrays for Transdermal Drug Delivery

We developed a modified micromolding method for the mass production of a novel tip-hollow microneedle array (MA). The tip-hollow MA was fabricated by tuning of the vacuum degree at -80 kPa for 60 s during the micromolding process. Subsequently, a tip-dissolvable MA encapsulated with drugs in the microcraters was fabricated from tip-hollow MA using repeated dipping and the freeze-drying process. Both the tip-hollow and tip-dissolvable MAs could easily penetrate in the rabbit skin without breakage, while the tip-hollow MA can just create a shallow loop hole in the skin. The drug-loaded tip-dissolvable MA can rapidly dissolve, releasing and diffusing the drug in the skin. The tip-dissolvable MA exhibited the best drug permeation ability in that the corresponding flux through the punctured skin using tip-dissolvable MA loaded with Rhodamine B is about 1.7- and 5.8-fold of that through the punctured skin using solid MA and the intact skin, respectively. The tip-dissolvable MA loaded with 5 IU insulin was fabricated to in vivo treat the type 1 diabetic SD rats. The tip-dissolvable MA had a good hypoglycemic effect and exhibited longer normoglycemic period in comparison with subcutaneous injection (5 IU). Therefore, our tip-dissolve MA is a promising medical device for transdermal drug delivery.

Fabrication of separable microneedles with phase change coating for NIR-triggered transdermal delivery of metformin on diabetic rats

To enhance the compliance of drug delivery for patients, the novel near-infrared (NIR) light-triggered and separable microneedles (MNs) have been developed in this work. Firstly, prussian blue nanoparticles (PB NPs) as the photo-thermal conversion factor and metformin as the hypoglycemic drug were embedded into the separable arrowheads, which consisted by poly (vinyl alcohol) and sucrose (PVA/Suc). The arrowheads of MNs were located on soluble solids supporting substrates that produced by poly(vinyl pyrrolidone) (PVP). Lauric acid (LA) as the phase transition coating covered on the surface of the MNs due to its lower phase transition temperature (~44 °C). Then, the separable arrowheads could be left into the skin because of the absorbing the interstitial fluid (IF) by the solid supporting substrates. With the irradiation of NIR light, LA could be melted due to the role of PB NPs in photo-thermal conversion, thus releasing the metformin from arrowheads. Compared with the traditional subcutaneous injections, the hypoglycemic effect was evaluated by the drug-release behaviors induced by NIR in vivo. The results showed that metformin could be allowed to on-demand release under the NIR irradiation. And the as-obtained MNs exhibited a good hypoglycemic effect, hypotoxicity and low inflammation reaction compared with those of traditional subcutaneous injections. The results indicate that the fabricated MNs have the potential treatment for diabetes due to their safety, convenience and painlessness.

Near-infrared light activatable hydrogels for metformin delivery

Drug loaded hydrogels have proven to be versatile controlled-release systems. We report here on heat active hydrogel formation by mixing graphene oxide (GO) or carboxyl enriched reduced graphene oxide (rGO-COOH) with metformin hydrochloride, an insulin sensitizer drug currently used as the first line therapy to treat patients with type 2 diabetes. The driving forces of the gelation process between the graphene-based nanomaterial and metformin are hydrogen bonding and electrostatic interactions, weakened at elevated temperature. Using the excellent photothermal properties of the graphene matrixes, we demonstrate that these supramolecular drug reservoirs can be photothermally activated for transdermal metformin delivery. A sustained delivery of metformin was achieved using a laser power of 1 W cm-2. In vitro assessment of the key target Glucose-6 Phosphatase (G6P) gene expression using a human hepatocyte model confirmed that metformin activity was unaffected by photothermal activation. In vivo, metformin was detected in mice plasma at 1 h post-activation of the metformin loaded rGO-COOH gel.