Impact of curcumin delivery system format on bioaccessibility: nanocrystals, nanoemulsion droplets, and natural oil bodies

Delivery of encapsulated bioactive compounds within food matrices to the digestive tract: recent trends and future perspectives

Encapsulation technologies have achieved encouraging results improving the stability, bioaccessibility and absorption of bioactive compounds post-consumption. There is a bulk of published research on the gastrointestinal behavior of encapsulated bioactive food materials alone using in vitro and in vivo digestion models, but an aspect often overlooked is the impact of the food structure, which is much more complex to unravel and still not well understood. This review focuses on discussing the recent findings in the application of encapsulated bioactive components in fabricated food matrices. Studies have suggested that the integration of encapsulated bioactive compounds has been proven to have an impact on the physicochemical characteristics of the finished product in addition to the protective effect of encapsulation on the fortified bioactive compound. These products containing bioactive compounds undergo further structural reorganization during digestion, impacting the release and emptying rates of fortified bioactive compounds. Thus, by manipulation of various food structures and matrices, the release and delivery of these bioactive compounds can be altered. This knowledge provides new opportunities for designing specialized foods for specific populations.

Stability and gastrointestinal behavior of curcumin-loaded emulsion stabilized by multi-conformation soy proteins: Influence of oil volume fraction

The aim of this work was to assess the potential of nanoemulsions stabilized by mixed soy protein with multi-conformation as curcumin carrier, and the influence of oil volume fraction on stability and gastrointestinal behavior of curcumin-loaded emulsion was investigated. Loading efficiency showed a slight increase with higher oil content, though the difference was not statistically significant. With the increase of oil, the viscosity (Pa‧s), thixotropy (area of hysteresis loop) and particle size of the emulsion increased, which facilitated the physical and chemical stability of curcumin-loaded emulsion. However, the free fatty acid release rate and bioaccessibility of curcumin was negatively correlated with the oil volume fraction and the particle size of emulsion after gastric digestion. Notably, the digestion in stomach did not affect the structure of interfacial protein, demonstrating that protein-based nanoemulsions exhibited resistance to gastric digestion. This study provides theoretical guidance for the application of protein-based emulsion in curcumin delivery.

Advances in Nanocarrier Systems for Overcoming Formulation Challenges of Curcumin: Current Insights

Curcumin, an organic phenolic molecule that is extracted from the rhizomes of Curcuma longa Linn, has undergone extensive evaluation for its diverse biological activities in both animals and humans. Despite its favorable characteristics, curcumin encounters various formulation challenges and stability issues that can be effectively addressed through the application of nanotechnology. Nano-based techniques specifically focused on enhancing solubility, bioavailability, and therapeutic efficacy while mitigating toxicity, have been explored for curcumin. This review systematically presents information on the improvement of curcumin's beneficial properties when incorporated, either individually or in conjunction with other drugs, into diverse nanosystems such as liposomes, nanoemulsions, polymeric micelles, dendrimers, polymeric nanoparticles, solid-lipid nanoparticles, and nanostructured lipid carriers. Additionally, the review examines ongoing clinical trials and recently granted patents, offering a thorough overview of the dynamic landscape in curcumin delivery. Researchers are currently exploring nanocarriers with crucial features such as surface modification, substantial loading capacity, biodegradability, compatibility, and autonomous targeting specificity and selectivity. Nevertheless, the utilization of nanocarriers for curcumin delivery is still in its initial phases, with regulatory approval pending and persistent safety concerns surrounding their use.

Unveiling the applications of membrane proteins from oil bodies: leading the way in artificial oil body technology and other biotechnological advancements

Oil bodies (OBs) function as organelles that store lipids in plant seeds. An oil body (OB) is encased by a membrane composed of proteins (e.g., oleosins, caleosins, and steroleosins) and a phospholipid monolayer. The distinctive protein-phospholipid membrane architecture of OBs imparts exceptional stability even in extreme environments, thereby sparking increasing interest in their structure and properties. However, a comprehensive understanding of the structure-activity relationships determining the stability and properties of oil bodies requires a more profound exploration of the associated membrane proteins, an aspect that remains relatively unexplored. In this review, we aim to summarize and discuss the structural attributes, biological functions, and properties of OB membrane proteins. From a commercial perspective, an in-depth understanding of the structural and functional properties of OBs is important for the expansion of their applications by producing artificial oil bodies (AOB). Besides exploring their structural intricacies, we describe various methods that are used for purifying and isolating OB membrane proteins. These insights may provide a foundational framework for the practical utilization of OB membrane proteins in diverse applications within the realm of AOB technology, including biological and probiotic delivery, protein purification, enzyme immobilization, astringency detection, and antibody production.

The mechanism of encapsulating curcumin into oleosomes (Lipid Droplets)

Organisms have evolved intracellular micron-sized lipid droplets to carry and protect lipids and hydrophobic minor compounds in the hydrophilic environment of cells. These droplets can be utilized as carriers of hydrophobic therapeutics by taking advantage of their biological functions. Here, we focus on the potential of plant-derived lipid droplets, known as oleosomes, as carriers for hydrophobic therapeutics, such as curcumin. By spectroscopy and confocal microscopy, we demonstrate that the oleosome membrane is permeable to hydrophobic curcumin molecules. Fluorescence recovery after photobleaching shows rapid curcumin diffusion towards oleosomes, with a diffusion time in the range of seconds. Following this, quenching probes and dilatational rheology reveal that part of the loaded curcumin molecules can accumulate at the oleosome interface, and the rest settle in the inner core. Our findings shed light on the loading mechanism of the plant-derived lipid droplets and underscore the significance of molecular localization for understanding the mechanism. This work not only enhances the understanding of the loading process but also shows potential for oleosomes use as lipid carriers.

Fabrication and characterization of chitosan-pectin emulsion-filled hydrogel prepared by cold-set gelation to improve bioaccessibility of lipophilic bioactive compounds

Chitosan-pectin emulsion-filled hydrogel (EFH) was developed to enhance the bioaccessibility of lipophilic bioactive compounds through intestinal delivery. The EFH, incorporating a sodium caseinate-stabilized emulsion, was prepared using cold-set gelation under acidic conditions without crosslinking agents. Increasing the pectin concentration (0.75-1.50%, w/v) improved the mechanical strength and compactness of the EFH. The pH-responsive EFH retained the emulsion at pH 2.0 and released it at pH 7.4. In vitro digestion demonstrated that the EFH remained intact during oral and gastric stages, while the emulsion alone became destabilized. During intestinal digestion, the release of free fatty acids from the EFH decreased from 58.67% to 43.76% as the pectin concentration increased from 0.75% to 1.50%. EFH with 0.75% and 1.00% pectin significantly improved curcumin bioaccessibility compared to the emulsion alone. These findings demonstrate the potential of chitosan-pectin EFH as a novel carrier system for enhancing the bioaccessibility of lipophilic bioactive compounds.

Curcumin-loaded oil body emulsions prepared by an ultrasonic and pH-driven method: Fundamental properties, stability, and digestion characteristics

In this study, oil bodies (OBs) loaded with curcumin (Cur) were successfully prepared via an ultrasonic and pH-driven method. Ultrasonic treatment significantly improved the encapsulation efficiency (EE) and loading capacity (LC) of Cur, producing OB particles with small size, uniform distribution, and high ζ-potential absolute values. When the ultrasonic power was 200 W, the EE, LC, and ζ-potential absolute value were the greatest (88.27 %, 0.044 %, and -25.71 mV, respectively), and the OBs possessed the highest yellowness, representing the best treatment result. The confocal laser scanning microscopy (CLSM) and cryo-scanning electron microscopy (cryo-SEM) results was also intuitionally shown that. Moreover, circular dichroism (CD) proved that ultrasonic treatment could unfold the surface protein structure, further enhancing the stability. Therefore, the cream index (CI), peroxide value (POV), and thiobarbituric acid reactive substances (TBARS) were the lowest when the ultrasonic power was 200 W. In this case, the Cur loaded in OBs was well protected against hostile conditions, evidenced by the highest Cur retention rate and the lowest degradation rate constant. Finally, the in vitro gastrointestinal digestion simulation results showed that the ultrasonic treatment effectively increased the release of FFA, bioaccessibility, and stability of Cur, especially when the ultrasonic power was 200 W. This research offers a new OB-based delivery system to stabilize, deliver, and protect Cur for food processing.

Post pH-driven encapsulation of polyphenols in next-generation foods: principles, formation and applications

To meet the needs of a growing global population (∼10 billion by 2050), there is an urgent demand for sustainable, healthy, delicious, and affordable next-generation foods. Natural polyphenols, which are abundant in edible plants, have emerged as promising food additives due to their potential health benefits. However, incorporating polyphenols into food products presents various challenges, including issues related to crystallization, low water-solubility, limited bioavailability, and chemical instability. pH-driven or pH-shifting approaches have been proposed to incorporate polyphenols into the delivery systems. Nevertheless, it is unclear whether they can be generally used for the encapsulation of polyphenols into next-generation foods. Here, we highlight a post pH-driven (PPD) approach as a viable solution. The PPD approach inherits several advantages, such as simplicity, speed, and environmental friendliness, as it eliminates the need for heat, organic solvents, and complex equipment. Moreover, the PPD approach can be widely applied to different polyphenols and food systems, enhancing its versatility while also potentially contributing to reducing food waste. This review article aims to accelerate the implementation of the PPD approach in the development of polyphenol-fortified next-generation foods by providing a comprehensive understanding of its fundamental principles, encapsulation techniques, and potential applications in plant-based foods.

Emulsion-Based Delivery Systems to Enhance the Functionality of Bioactive Compounds: Towards the Use of Ingredients from Natural, Sustainable Sources

In recent years, the trend in the population towards consuming more natural and sustainable foods has increased significantly. This claim has led to the search for new sources of bioactive compounds and extraction methods that have less impact on the environment. Moreover, the formulation of systems to protect these compounds is also focusing on the use of ingredients of natural origin. This article reviews novel, natural alternative sources of bioactive compounds with a positive impact on sustainability. In addition, it also contains information on the most recent studies based on the use of natural (especially from plants) emulsifiers in the design of emulsion-based delivery systems to protect bioactive compounds. The properties of these natural-based emulsion-delivery systems, as well as their functionality, including in vitro and in vivo studies, are also discussed. This review provides relevant information on the latest advances in the development of emulsion delivery systems based on ingredients from sustainable natural sources.

Development of pH-Responsive N-benzyl-N-O-succinyl Chitosan Micelles Loaded with a Curcumin Analog (Cyqualone) for Treatment of Colon Cancer

This work aimed at preparing nanomicelles from N-benzyl-N, O-succinyl chitosan (NBSCh) loaded with a curcumin analog, 2,6-bis((3-methoxy-4-hydroxyphenyl) methylene) cyclohexanone, a.k.a. cyqualone (CL), for antineoplastic colon cancer chemotherapy. The CL-loaded NBSCh micelles were spherical and less than 100 nm in size. The entrapment efficiency of CL in the micelles ranged from 13 to 39%. Drug release from pristine CL was less than 20% in PBS at pH 7.4, whereas the release from CL-NBSCh micelles was significantly higher. The release study of CL-NBSCh revealed that around 40% of CL content was released in simulated gastric fluid at pH 1.2; 79 and 85% in simulated intestinal fluids at pH 5.5 and 6.8, respectively; and 75% in simulated colonic fluid at pH 7.4. CL-NBSCh showed considerably high selective cytotoxicity towards mucosal epithelial human colon cancer (HT-29) cells and lower levels of toxicity towards mouse connective tissue fibroblasts (L929). CL-NBSCh was also more cytotoxic than the free CL. Furthermore, compared to free CL, CL-NBSCh micelles were found to be more efficient at arresting cell growth at the G2/M phase, and induced apoptosis earlier in HT-29 cells. Collectively, these results indicate the high prospective potential of CL-loaded NBSCh micelles as an oral therapeutic intervention for colon cancer.

Enhancing the Gastrointestinal Stability of Curcumin by Using Sodium Alginate-Based Nanoemulsions Containing Natural Emulsifiers

Curcumin presents interesting biological activities but low chemical stability, so it has been incorporated into different emulsion-based systems in order to increase its bioaccessibility. Many strategies are being investigated to increase the stability of these systems. Among them, the use of polysaccharides has been seen to highly improve the emulsion stability but also to modulate their digestibility and the release of the encapsulated compounds. However, the effect of these polysaccharides on nanoemulsions depends on the presence of other components. Then, this work aimed to study the effect of alginate addition at different concentrations (0-1.5%) on the gastrointestinal fate and stability of curcumin-loaded nanoemulsions formulated using soybean lecithin or whey protein as emulsifiers. Results showed that, in the absence of polysaccharides, whey protein was more effective than lecithin in preventing curcumin degradation during digestion and its use also provided greater lipid digestibility and higher curcumin bioaccessibility. The addition of alginate, especially at ≥1%, greatly prevented curcumin degradation during digestion up to 23% and improved the stability of nanoemulsions over time. However, it reduced lipid digestibility and curcumin bioaccessibility. Our results provide relevant information on the use of alginate on different emulsifier-based nanoemulsions to act as carriers of curcumin.

Rational Design of Self-Emulsifying Pellet Formulation of Thymol: Technology Development Guided by Molecular-Level Structure Characterization and Ex Vivo Testing

The growing need for processing natural lipophilic and often volatile substances such as thymol, a promising candidate for topical treatment of intestinal mucosa, led us to the utilization of solid-state nuclear magnetic resonance (ss-NMR) spectroscopy for the rational design of enteric pellets with a thymol self-emulsifying system (SES). The SES (triacylglycerol, Labrasol®, and propylene glycol) provided a stable o/w emulsion with particle size between 1 and 7 µm. The ex vivo experiment confirmed the SES mucosal permeation and thymol delivery to enterocytes. Pellets W90 (MCC, Neusilin®US2, chitosan) were prepared using distilled water (90 g) by the M1−M3 extrusion/spheronisation methods varying in steps number and/or cumulative time. The pellets (705−740 µm) showed mostly comparable properties—zero friability, low intraparticular porosity (0−0.71%), and relatively high density (1.43−1.45%). They exhibited similar thymol release for 6 h (burst effect in 15th min ca. 60%), but its content increased (30−39.6 mg/g) with a shorter process time. The M3-W90 fluid-bed coated pellets (Eudragit®L) prevented undesirable thymol release in stomach conditions (<10% for 3 h). A detailed, ss-NMR investigation revealed structural differences across samples prepared by M1−M3 methods concerning system stability and internal interactions. The suggested formulation and methodology are promising for other lipophilic volatiles in treating intestinal diseases.

Evaluation of the synergistic effect of plant-based components on the stability of curcuminoid emulsion

In this study, the effect of matrix compounds from natural curcuminoid resources on the stability of curcuminoids and emulsions thereof was evaluated. Curcuminoid emulsions were prepared curcuminoid rich sources (curcuminoid extract, an aqueous turmeric concentrate and turmeric powder) with medium-chain triglyceride oil as lipid phase, lecithin, and pectin as emulsifiers. The curcuminoid emulsions were exposed to light in the visible wavelength range (300 nm–800 nm) at the specific energy input of 0.47 kW/m2 for 7 days and to the temperature of 4 °C, 25 °C, 40 °C for 49 days. The total curcuminoid retention (TC), droplet size (DS) change, instability index (InI), and yellowness reduction (YR) was observed during the storage time. The half-life of curcuminoids in emulsions was increased to 21 h, while the half-life of free curcuminoids was 1.3 h in the light exposure test. The co-compounds from the curcuminoid sources contributed to the emulsion stability by increasing the viscosity. In the thermal exposure test, the matrix compound system retained more than 93% curcuminoids after 49 days of storage at 40 °C, whereas the phase separation increased significantly. However, the TC reduction was independent of the InI change and droplet agglomeration. The YR depended on the TC and the amount of co-components in the emulsion.

Nano-enabled plant-based colloidal delivery systems for bioactive agents in foods: Design, formulation, and application

Consumers are becoming increasingly aware of the impact of their dietary choices on the environment, animal welfare, and health, which is causing many of them to adopt more plant-based diets. For this reason, many sectors of the food industry are reformulating their products to contain more plant-based ingredients. This article describes recent research on the formation and application of nano-enabled colloidal delivery systems formulated from plant-based ingredients, such as polysaccharides, proteins, lipids, and phospholipids. These delivery systems include nanoemulsions, solid lipid nanoparticles, nanoliposomes, nanophytosomes, and biopolymer nanoparticles. The composition, size, structure, and charge of the particles in these delivery systems can be manipulated to create novel or improved functionalities, such as improved robustness, higher optical clarity, controlled release, and increased bioavailability. There have been major advances in the design, assembly, and application of plant-based edible nanoparticles within the food industry over the past decade or so. As a result, there are now a wide range of different options available for creating delivery systems for specific applications. In the future, it will be important to establish whether these formulations can be produced using economically viable methods and provide the desired functionality in real-life applications.

Evidence-Based Management of Uterine Fibroids With Botanical Drugs-A Review

Uterine fibroids (UFs) are a common benign gynecological tumor that affect the majority of women over their lifetime. Several pharmacological agents are available to reduce the size of fibroids and ameliorate the symptoms of UF. However, these drugs are expensive and are usually associated with profound side effects. Thus, botanical drugs are gaining attention in this era due to their cost effectiveness with a comparable and more potent therapeutic efficacy while demonstrating lesser adverse effects. The objective of this review is to summarize the available information on the mechanism of various botanical drugs and polyherbal formulations with anti-uterine fibroid activity. A systematic search was performed on botanical drugs with anti-uterine fibroid activity using several search engines, which include PubMed, Google Scholar, and Science Direct. Based on the literatures identified, a total of five botanical drugs and three polyherbal formulations were included and discussed in this review, which yields useful information regarding the mechanism of different botanical drugs and polyherbal formulations in exerting anti-uterine fibroid activity for its potential use as an alternative treatment choice for uterine fibroids.

Edible Bioactive Film with Curcumin: A Potential "Functional" Packaging?

Edible packaging has been developed as a biodegradable and non-toxic alternative to traditional petroleum-based food packaging. Biopolymeric edible films, in addition to their passive protective function, may also play a bioactive role as vehicles for bioactive compounds of importance to human health. In recent years, a new generation of edible food packaging has been developed to incorporate ingredients with functional potential that have beneficial effects on consumer health. Curcumin, a bioactive compound widely used as a natural dye obtained from turmeric rhizomes (Curcuma longa L.), has a broad spectrum of beneficial properties for human health, such as anti-inflammatory, anti-hypertensive, antioxidant, anti-cancer, and other activities. To demonstrate these properties, curcumin has been explored as a bioactive agent for the development of bioactive packaging, which can be referred to as functional packaging and used in food. The aim of this review was to describe the current and potential research on the development of functional-edible-films incorporating curcumin for applications such as food packaging.

Aqueous Extraction of Curcuminoids from Curcuma longa: Effect of Cell Disintegration Pre-treatment and Extraction Condition

Cell structure modification techniques have the potential to improve curcuminoid recovery in Curcuma longa. In this study, different pre-treatments such as high hydrostatic pressure (HPP, high pressure processing), ultrasound (US), pulsed electric field (PEF), and ohmic heating (OH) were used on dried C. longa before aqueous extraction at pH 2.0, 5.0, and 8.0. The released curcuminoids, cell disintegration index (Zp), particle size distribution (PSD), and color (CIE L*, a*, b*) were used to evaluate the different pre-treatment impacts on plant structure and extract properties. In untreated turmeric, the highest amount of released curcuminoids (3.89 mg/g dry matter) was obtained after extraction for 30 min at 95° in the aqueous phase. After pre-treatments, the acidic conditions showed a considerable improvement in curcuminoid recovery; PEF, HPP, and OH improved the curcuminoid recovery by 3.39-, 3.13-, and 1.24-fold, respectively; while US did not lead to an increased release of curcuminoids compared to the untreated material. The highest curcuminoid recovery (with PEF and extraction at pH 5.0) was 6.6% w/w of the total curcuminoids. The non-thermal pre-treatments have less impact on the extract’s color compared to the extraction pH, with alkaline conditions reducing the lightness of the extract.

Stability and bioavailability of protein matrix-encapsulated astaxanthin ester microcapsules

BACKGROUND

Astaxanthin ester derived from Haematococcus pluvialis is often used as a functional and nutritional ingredient in foods. However, its utilization is currently limited as a result of its chemical instability and low bioavailability. Food matrix microcapsules are becoming increasingly popular because of their safety and high encapsulation efficiency. In the present study, the effect of protein matrixes on the properties of microcapsules was evaluated.

RESULTS

We investigated the effects of storage on astaxanthin ester microcapsules and the corresponding rehydration solution at 40 °C under a nitrogen atmosphere, as well as in darkness. The results showed that the stability of products prepared based on whey protein (WP) and corn-gluten was superior to that of products prepared based on lactoferrin, soy protein and sodium caseinate. The bioavailability of astaxanthin ester microcapsules encapsulated with different proteins and examined by means of astaxanthin concentrations in the serum and liver after oral administration was compared. All five protein wall materials could significantly improve the bioavailability of astaxanthin ester. The microcapsules prepared based on WP had the highest bioavailability, with a value of 10.69 ± 0.75 μg·h mL^-1 , which was 3.15 times higher compared to that of the control group.

CONCLUSION

The results of the present study showed that protein encapsulation, especially WP encapsulation, could effectively improve the stability, water solubility and bioavailability of astaxanthin esters. Thus, WP can be used as the main wall material in delivery systems. © 2021 Society of Chemical Industry.

Influences of microwave exposure to flaxseed on the physicochemical stability of oil bodies: Implication of interface remodeling

This study aimed to investigate the influences of microwave (MV) exposure to flaxseed on the physicochemical stability of oil bodies (OBs) focused on the interface remodeling. The results showed that the intracellular OBs subjected to absolute rupture and then partial dispersion by protein bodies visualized by TEM following MV exposure (1-5 min; 700 W). After aqueous extraction, native flax OBs manifested excellent spherical particles with completely intact surface and wide particle size distribution (0.5-3.0 μm) examined by cryo-SEM. Upon 1-5 min of MV exposure, the defective interface integrity and beaded morphology were successively observed for flax OBs, accompanied by the impaired physical stability and rheological behavior due to the newly assembled phospholipid/protein interface. Notably, the profitable migration of phenolic compounds effectively suppressed the lipid peroxidation and protein carbonylation in flax OBs. Thus, MV exposure (1-5 min; 700 W) was unfavorable for improving the physical stability of flax OBs.

Pharmacological Mechanisms and Clinical Applications of Curcumin: Update

Curcumin, a well-known hydrophobic polyphenol extracted from the rhizomes of turmeric (Curcuma longa L.), has attracted great interest in the last ten years due to its multiple pharmacological activities. A growing body of evidence has manifested that curcumin has extensive pharmacological activities including anti-inflammatory, anti-oxygenation, lipid regulation, antiviral, and anticancer with hypotoxicity and minor adverse reactions. However, the disadvantages of low bioavailability, short half-life in plasma, low drug concentration in blood, and poor oral absorption severely limited the clinical application of curcumin. Pharmaceutical researchers have carried out plenty of dosage form transformations to improve the druggability of curcumin and have achieved remarkable results. Therefore, the objective of this review summarizes the pharmacological research progress, problems in clinical application and the improvement methods of curcumin's druggability. By reviewing the latest research progress of curcumin, we believe that curcumin has a broad clinical application prospect for its wide range of pharmacological activities with few side effects. The deficiencies of lower bioavailability of curcumin could be improved by dosage form transformation. However, curcumin in the clinical application still requires further study regarding the underlying mechanism and clinical trial verification.

Solid-State Fluorescent Selenium Quantum Dots by a Solvothermal-Assisted Sol-Gel Route for Curcumin Sensing

Toward the need for solid-state fluorescent quantum dots, resistant to self-quenching, we describe a solvothermal-assisted sol-gel method to synthesize Se quantum dots. Morphological and crystalline characterizations reveal that Se quantum dots (average size 3-8 nm) have a trigonal crystal structure. The presence of planar defects (dislocations, stacking faults, twins, and grain boundaries) suggests formation of Se nanocrystallites through aggregation-based crystal growth mechanisms. Under ultraviolet excitation, the quantum dots exhibit an excitation wavelength-dependent solid-state blue emission with an average lifetime of 1.96 ns. Depending on fluorescence quenching by curcumin, selenium quantum dots act as ideal candidates for inner filter effect-based curcumin sensing.

Encapsulation of lipophilic polyphenols in plant-based nanoemulsions: impact of carrier oil on lipid digestion and curcumin, resveratrol and quercetin bioaccessibility

Lipophilic polyphenol compounds (LPCs) are claimed to exhibit a broad spectrum of biological activities that may improve human health and wellbeing, including antioxidant, anti-inflammatory, and anti-cancer properties. Nanoemulsion-based delivery systems have been developed to encapsulate LPCs so as to increase their food matrix compatibility, physicochemical stability, and bioavailability. LPCs vary in their structural features, including the number and position of phenolic hydroxyl, ketone, and aliphatic groups, which results in different molecular, physicochemical, and gastrointestinal properties. In this study, we examined the impact of plant-based carrier oils (coconut, sunflower, and flaxseed oils) and LPC type (curcumin, resveratrol, and quercetin) on the in vitro gastrointestinal fate of polyphenols loaded into quillaja saponin-stabilized nanoemulsions. Coconut oil contains high levels of medium-chain saturated fatty acids (MC-SFAs), sunflower oil contains high levels of long-chain monounsaturated fatty acids (LC-MUFAs), and flaxseed oil contains high levels of long-chain polyunsaturated fatty acids (LC-PUFAs). The encapsulation efficiency and gastrointestinal stability of the LPCs were slightly lower in the MC than the LC oils. Differences in the gastrointestinal stability of the three LPCs were linked to differences in their oil-water partition coefficients. Some of the LPCs inhibited lipid digestion for certain oil types. In particular, resveratrol retarded the digestion of all three oils, but it still had the highest GIT stability and bioaccessibility. This study provides valuable information about the gastrointestinal fate of LPC-loaded nanoemulsions and highlights important differences in the behavior of LPCs with different characteristics. This knowledge may facilitate the design of more effective plant-based delivery systems for bioactive lipophilic polyphenols.

Fabrication of Caseinate Stabilized Thymol Nanosuspensions via the pH-Driven Method: Enhancement in Water Solubility of Thymol

Thymol has been applied as a spice and antibacterial agent in commercial products. However, the utilization of thymol in the food and pharmaceutical field has recently been limited by its poor water solubility and stability. In this work, a caseinate-stabilized thymol nanosuspension was fabricated by pH-driven methods to overcome those limitations. Firstly, the chemical stability of thymol at different pH value conditions was investigated. The physiochemical properties of thymol nanosuspensions were then characterized, such as average particle size, zeta potential, encapsulation efficiency, and loading capacity. Meanwhile, the X-ray diffraction results showed that thymol was present as an amorphous state in the nanosuspensions. The thermal stability of thymol was slightly enhanced by encapsulation through this process, and the thymol nanosuspensions were stable during the long-term storage, and the average particle size of nanosuspensions showed that there was no aggregation of nanosuspensions during storage and high temperature. Finally, the antimicrobial activity of thymol nanosuspensions was evaluated by investigating the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) against Salmomella enterca, Staphlococcus aureus, Escherichia coli, and Listeria monocytogenes. These results could provide useful information and implications for promoting the application of thymol in food, cosmetic, and pharmaceutical commercial products.

Protein-olive oil-in-water nanoemulsions as encapsulation materials for curcumin acting as anticancer agent towards MDA-MB-231 cells

The sustainable cellular delivery of the pleiotropic drug curcumin encounters drawbacks related to its fast autoxidation at the physiological pH, cytotoxicity of delivery vehicles and poor cellular uptake. A biomaterial compatible with curcumin and with the appropriate structure to allow the correct curcumin encapsulation considering its poor solubility in water, while maintaining its stability for a safe release was developed. In this work, the biomaterial developed started by the preparation of an oil-in-water nanoemulsion using with a cytocompatible copolymer (Pluronic F 127) coated with a positively charged protein (gelatin), designed as G-Cur-NE, to mitigate the cytotoxicity issue of curcumin. These G-Cur-NE showed excellent capacity to stabilize curcumin, to increase its bio-accessibility, while allowing to arrest its autoxidation during its successful application as an anticancer agent proved by the disintegration of MDA-MB-231 breast cancer cells as a proof of concept.

Radix Pseudostellariae protein-curcumin nanocomplex: Improvement on the stability, cellular uptake and antioxidant activity of curcumin

Radix Pseudostellariae protein (RPP) with satisfactory antioxidant activity and self-assembled ability was extracted from dried Radix Pseudostellariae. In this study, RPP-curcumin nanocomplex (RPP-Cur) was fabricated, and its improvement on the stability, cellular uptake and antioxidant activity of curcumin was investigated. RPP-Cur with homogeneously spherical structure exhibited good stability, which could maintain the morphology against simulated gastrointestinal digestion and up to 300 mM ionic concentration. After RPP nanoparticles encapsulation, the retention of curcumin increased 1.45 times under UV irradiation for 6 h. Besides, RPP-Cur exhibited additive reducing power of curcumin and RPP. The transport efficiency of hydrophobic curcumin across Caco-2 cells monolayer was greatly improved by RPP nanoparticle by 3.7 folds. RPP-Cur was able to be internalized by Caco-2 cells dose-dependently via macropinocytosis and clathrin-mediated endocytosis. The cellular uptake efficiency of embedded curcumin in RPP nanoparticles by Caco-2 cells was significantly higher than that of free curcumin, which might contribute to the enhanced intracellular antioxidant activity of RPP-Cur. These findings suggest that the proteins from Radix Pseudostellariae have potential to be developed into novel delivery system with intrinsic antioxidant activity for the hydrophobic active molecules in healthy food field.

Advances in edible nanoemulsions: Digestion, bioavailability, and potential toxicity

The design, fabrication, and application of edible nanoemulsions for the encapsulation and delivery of bioactive agents has been a highly active research field over the past decade or so. In particular, they have been widely used for the encapsulation and delivery of hydrophobic bioactive substances, such as hydrophobic drugs, lipids, vitamins, and phytochemicals. A great deal of progress has been made in creating stable edible nanoemulsions that can increase the stability and efficacy of these bioactive agents. This article highlights some of the most important recent advances within this area, including increasing the water-dispersibility of bioactives, protecting bioactives from chemical degradation during storage, increasing the bioavailability of bioactives after ingestion, and targeting the release of bioactives within the gastrointestinal tract. Moreover, it highlights progress that is being made in creating plant-based edible nanoemulsions. Finally, the potential toxicity of edible nanoemulsions is considered.

Recent Advances in Oral Nano-Antibiotics for Bacterial Infection Therapy

Bacterial infections are the main infectious diseases and cause of death worldwide. Antibiotics are used to treat various infections ranging from minor to life-threatening ones. The dominant route to administer antibiotics is through oral delivery and subsequent gastrointestinal tract (GIT) absorption. However, the delivery efficiency is limited by many factors such as low drug solubility and/or permeability, gastrointestinal instability, and low antibacterial activity. Nanotechnology has emerged as a novel and efficient tool for targeting drug delivery, and a number of promising nanotherapeutic strategies have been widely explored to overcome these obstacles. In this review, we explore published studies to provide a comprehensive understanding of the recent progress in the area of orally deliverable nano-antibiotic formulations. The first part of this article discusses the functions and underlying mechanisms by which nanomedicines increase the oral absorption of antibiotics. The second part focuses on the classification of oral nano-antibiotics and summarizes the advantages, disadvantages and applications of nanoformulations including lipid, polymer, nanosuspension, carbon nanotubes and mesoporous silica nanoparticles in oral delivery of antibiotics. Lastly, the challenges and future perspective of oral nano-antibiotics for infection disease therapy are discussed. Overall, nanomedicines designed for oral drug delivery system have demonstrated the potential for the improvement and optimization of currently available antibiotic therapies.

Nano-enabled personalized nutrition: Developing multicomponent-bioactive colloidal delivery systems

There is growing interest in the production of foods and beverages with nutrient and nutraceutical profiles tailored to an individual's specific nutritional requirements. In principle, these personalized nutrition products are formulated based on the genetics, epigenetics, metabolism, microbiome, phenotype, lifestyle, age, gender, and health status of a person. A challenge in this area is to create customized functional food and beverage products that contain the required combination of bioactive agents, such as lipids, proteins, carbohydrates, vitamins, minerals, nutraceuticals, prebiotics and probiotics. Nanotechnology may facilitate the development of these kind of products since it can be used to encapsulate one or more bioactive agent in a single colloidal delivery system. This delivery system may contain one or more different kinds of colloidal particle, specifically designed to protect each nutrient in the food, but then deliver it in a bioavailable form after ingestion. This review article provides an overview of the different kinds of bioactives that need to be delivered, as well as some of the challenges associated with incorporating them into functional foods and beverages. It then highlights how nanotech-enabled colloidal delivery systems can be developed to encapsulate multiple bioactive agents in a form suitable for functional food applications, particularly in the personalized nutrition field.

Nutraceutical nanodelivery; an insight into the bioaccessibility/bioavailability of different bioactive compounds loaded within nanocarriers

Nanofoods is a current concept that is based on the application of nanotechnologies in the preparation of safe foods, with superior nutritional and sensory characteristics, and capable of providing multiple health benefits. In line with the principles of this concept, food scientists have focused on developing new types of nano biosystems that can contribute to increasing the bioavailability of bioactive compounds used in food fortification. Numerous research teams have investigated the main factors limiting oral bioavailability including: bioaccessibility, absorption and transformation of bioactive compounds and bioactive-loaded nanocarriers. The physicochemical processes involved in the factors limiting oral bioavailability have been extensively studied, such asthe release, solubility and interaction of bioactive compounds and nanocarriers during food digestion, transport mechanisms of bioactive compounds and nanoparticles through intestinal epithelial cells as well as the chemical and biochemical transformations in phase I and phase II reactions. In this comprehensive review, the physicochemical processes involved in the bioaccessibility/bioavailability of different encapsulated bioactive compounds, that play an important role in human health, will be explained including polyphenols, phytosterols, carotenoids, vitamins and minerals. In particular, the mechanisms involved in the cellular uptake of bioactive-loaded nanocarriers including transcellular transport (diffusion, endocytosis, pinocytosis, transcytosis, phagocytosis), paracellular transport (through the "tight junctions" between epithelial cells), and the active transport of bioactive compounds under the action of membrane transporters are highlighted.

Formulation of More Efficacious Curcumin Delivery Systems Using Colloid Science: Enhanced Solubility, Stability, and Bioavailability

Curcumin is a bioactive constituent isolated from turmeric that has historically been used as a seasoning, pigment, and herbal medicine in food. Recently, it has become one of the most commonly studied nutraceuticals in the pharmaceutical, supplement, and food areas because of its myriad of potential health benefits. For instance, it is claimed to exhibit antioxidant, anti-inflammatory, antimicrobial, antiparasite, and anticancer activities when ingested as a drug, supplement, or food. Toxicity studies suggest that it is safe to consume, even at relatively high levels. Its broad-spectrum biological activities and low toxicity have meant that it has been widely explored as a nutraceutical ingredient for application in functional foods. However, there are several hurdles that formulators must overcome when incorporating curcumin into commercial products, such as its low water solubility (especially under acidic and neutral conditions), chemical instability (especially under neutral and alkaline conditions), rapid metabolism by enzymes in the human body, and limited bioavailability. As a result, only a small fraction of ingested curcumin is actually absorbed into the bloodstream. These hurdles can be at least partially overcome by using encapsulation technologies, which involve trapping the curcumin within small particles. Some of the most commonly used edible microparticles or nanoparticles utilized for this purpose are micelles, liposomes, emulsions, solid lipid particles, and biopolymer particles. Each of these encapsulation technologies has its own benefits and limitations for particular product applications and it is important to select the most appropriate one.

Development of Next-Generation Nutritionally Fortified Plant-Based Milk Substitutes: Structural Design Principles

Consumers are increasingly interested in decreasing their dietary intake of animal-based food products, due to health, sustainability, and ethical concerns. For this reason, the food industry is creating new products from plant-based ingredients that simulate many of the physicochemical and sensory attributes associated with animal-derived foods, including milk, eggs, and meat. An understanding of how the ingredient type, amount, and organization influence the desirable physicochemical, sensory, and nutritional attributes of these plant-based foods is required to achieve this goal. A potential problem with plant-based diets is that they lack key micronutrients, such as vitamin B12, vitamin D, calcium, and ω-3 fatty acids. The aim of this review is to present the science behind the creation of next-generation nutritionally fortified plant-based milk substitutes. These milk-like products may be formed by mechanically breaking down certain plant materials (including nuts, seeds, and legumes) to produce a dispersion of oil bodies and other colloidal matter in water, or by forming oil-in-water emulsions by homogenizing plant-based oils and emulsifiers with water. A brief overview of the formulation and fabrication of plant-based milks is given. The relationship between the optical properties, rheology, and stability of plant-based milks and their composition and structure is then covered. Approaches to fortify these products with micronutrients that may be missing from a plant-based diet are also highlighted. In conclusion, this article highlights how the knowledge of structural design principles can be used to facilitate the creation of higher quality and more sustainable plant-based food products.

Structure and functions of oleosomes (oil bodies)

Oleosomes are natural oil droplets, abundant in plants and more specifically in seeds, composing 20-50 wt% of their mass. The structure of oleosomes is the mechanism that seeds developed to safely store energy in the form of triacylglycerols and use it during germination. For this, the phospholipid/protein membrane that covers and protects the triacylglycerols has been wisely developed during evolution to grant them extreme stability against physical and chemical stresses. The remarkable property-performance relationships of oleosomes have generated a lot of interest to incorporate them in oil-in-water emulsions and take advantage of their sophisticated membrane. However, the structure-function relationship of the molecular components in the oleosome membrane is still not well understood and requires more attention in order to take complete advantage of their potential functions. The aim of this review is to give insights into the architecture of the oleosomes and to discuss the exploitation of their properties in advanced and broad applications, from carrying and protecting sensitive molecules to bio-catalysis.

Fabrication of Curcumin-Loaded Dairy Milks Using the pH-Shift Method: Formation, Stability, and Bioaccessibility

The pH-shift method is a simple approach for incorporating certain kinds of polyphenol-based nutraceuticals into already existing colloidal systems. The polyphenols can be loaded into hydrophobic particles due to the fact that their water-solubility is relatively high under alkaline conditions but low under acid or neutral conditions. In this study, it was demonstrated that bovine milk could be enriched with curcumin using this approach, without adversely affecting milk fat globule stability. The storage stability of the curcumin-enriched bovine milk was assessed when samples were incubated for 60 days at different pH values and temperatures. The pH-stability was determined by storing curcumin-enriched milk at 4 °C for 60 days at pH 6.5, 7.0, and/or 8.0. At this low storage temperature, all milk samples were stable to fat globule aggregation, creaming, curcumin degradation (<13% loss), and color loss. The temperature-stability was determined by storing curcumin-enriched milk at pH 7 for 15 days at 4, 20, 37, or 55 °C. Curcumin breakdown decreased with decreasing storage temperature: 55 °C (43%) > 37 °C (21%) > 20 °C (10%) > 4 °C (5%). Interestingly, the color of the curcumin-enriched milks incubated at 4, 20, and 37 °C remained similar to that of the initial samples, but the sample stored at 55 °C showed significant color fading. Curcumin bioaccessibility determined using an in vitro gastrointestinal tract was around 40%, which was attributed to some chemical degradation and binding of the curcumin reducing its stability and solubilization. This study shows that a hydrophobic nutraceutical (curcumin) can be loaded into dairy milk products using a simple method, which could facilitate the creation of novel functional foods and beverages.

Encapsulation of pterostilbene in nanoemulsions: influence of lipid composition on physical stability, in vitro digestion, bioaccessibility, and Caco-2 cell monolayer permeability

Nanoemulsions fabricated using medium chain triglycerides as carrier lipid are more effective for delivering pterostilbene than long chain triglycerides.