Distributed fibre optofluidic laser for chip-scale arrayed biochemical sensing

Highly Accurate Pneumatically Tunable Optofluidic Distributed Feedback Dye Lasers

Optofluidic dye lasers integrated into microfluidic chips are promising miniature coherent light sources for biosensing. However, achieving the accurate and efficient tuning of lasers remains challenging. This study introduces a novel pneumatically tunable optofluidic distributed feedback (DFB) dye laser in a multilayer microfluidic chip. The dye laser device integrates microfluidic channels, grating structures, and vacuum chambers. A second-order DFB grating configuration is utilized to ensure single-mode lasing. The application of vacuum pressure to the chambers stretches the soft grating layer, enabling the sensitive tuning of the lasing wavelength at a high resolution of 0.25 nm within a 7.84 nm range. The precise control of pressure and laser tuning is achieved through an electronic regulator. Additionally, the integrated microfluidic channels and optimized waveguide structure facilitate efficient dye excitation, resulting in a low pump threshold of 164 nJ/pulse. This pneumatically tunable optofluidic DFB laser, with its high-resolution wavelength tuning range, offers new possibilities for the development of integrated portable devices for biosensing and spectroscopy.

Submonolayer biolasers for ultrasensitive biomarker detection

Biomarker detection is key to identifying health risks. However, designing sensitive and single-use biosensors for early diagnosis remains a major challenge. Here, we report submonolayer lasers on optical fibers as ultrasensitive and disposable biosensors. Telecom optical fibers serve as distributed optical microcavities with high Q-factor, great repeatability, and ultralow cost, which enables whispering-gallery laser emission to detect biomarkers. It is found that the sensing performance strongly depends on the number of gain molecules. The submonolayer lasers obtained a six-order-of-magnitude improvement in the lower limit of detection (LOD) when compared to saturated monolayer lasers. We further achieve an ultrasensitive immunoassay for a Parkinson's disease biomarker, alpha-synuclein (α-syn), with a lower LOD of 0.32 pM in serum, which is three orders of magnitude lower than the α-syn concentration in the serum of Parkinson's disease patients. Our demonstration of submonolayer biolaser offers great potentials in high-throughput clinical diagnosis with ultimate sensitivity.

Precise photoelectrochemical tuning of semiconductor microdisk lasers

Micro- and nano-disk lasers have emerged as promising optical sources and probes for on-chip and free-space applications. However, the randomness in disk diameter introduced by standard nanofabrication makes it challenging to obtain deterministic wavelengths. To address this, we developed a photoelectrochemical (PEC) etching-based technique that enables us to precisely tune the lasing wavelength with sub-nanometer accuracy. We examined the PEC mechanism and compound semiconductor etching rate in diluted sulfuric acid solution. Using this technique, we produced microlasers on a chip and isolated particles with distinct lasing wavelengths. Our results demonstrate that this scalable technique can be used to produce groups of lasers with precise emission wavelengths for various nanophotonic and biomedical applications.

Novel Optofluidic Imaging System Integrated with Tunable Microlens Arrays

Optofluidic tunable microlens arrays (MLAs) can manipulate and control light propagation using fluids. Lately, their applicability to miniature lab-on-a-chip systems is being extensively researched. However, it is difficult to incorporate 3D MLAs directly in a narrow microfluidic channel using common techniques. This has resulted in limited research on variable focal length imaging with optofluidic 3D MLAs. In this paper, we propose a method for fabricating MLAs in polydimethylsiloxane (PDMS)-based microchannels via electrohydrodynamic jet (E-jet) printing to achieve optofluidic tunable MLAs. Using this method, MLAs of diameters 15 to 80 μm can be fabricated in microfluidic channels with widths of 200 and 300 μm. By alternately using solutions with different refractive indices in the microchannel, the optofluidic microlenses exhibit reversible modulation properties while retaining the morphologies and refractive indices of the microlenses. The focal length of the resulting optofluidic chip can have threefold tunability, thereby achieving an imaging depth of approximately 450 μm. This outstanding advantage is useful in observing microspheres and cells flowing in the microfluidic system. Thus, the proposed optofluidic chip exhibits great potential for cell counting and imaging applications.

Monitoring Various Bioactivities at the Molecular, Cellular, Tissue, and Organism Levels via Biological Lasers

The laser is considered one of the greatest inventions of the 20th century. Biolasers employ high signal-to-noise ratio lasing emission rather than regular fluorescence as the sensing signal, directional out-coupling of lasing and excellent biocompatibility. Meanwhile, biolasers can also be micro-sized or smaller lasers with embedded/integrated biological materials. This article presents the progress in biolasers, focusing on the work done over the past years, including the molecular, cellular, tissue, and organism levels. Furthermore, biolasers have been utilized and explored for broad applications in biosensing, labeling, tracking, bioimaging, and biomedical development due to a number of unique advantages. Finally, we provide the possible directions of biolasers and their applications in the future.

Cellular lasers for cell imaging and biosensing

The possibility to produce laser action involving biomaterials, in particular (single) biological cells, has fostered the development of cellular lasers as a novel approach in biophotonics. In this respect, cells that are engineered to carry gain medium (e.g., fluorescent dyes or proteins) are placed inside an optical cavity (i.e., typically a sandwich of highly reflective mirrors), allowing the generation of stimulated emission upon sufficient optical pumping. In another scenario, micron-sized optical resonators supporting whispering-gallery mode (WGM) or semiconductor-based laser probes can be internalized by the cells and support light amplification. This review summarizes the recent advances in the fields of biolasers and cellular lasers, and most importantly, highlights their potential applications in the fields of in vitro and in vivo cell imaging and analysis. They include biosensing (e.g., in vitro detection of sodium chloride (NaCl) concentration), cancer cell imaging, laser-emission-based microscope, cell tracking, cell distinction study, and tissue contraction monitoring in zebrafish. Lastly, several fundamental issues in developing cellular lasers including laser probe fabrication, biocompatibility of the system, and alteration of local refractive index of optical cavities due to protein absorption or probe aggregation are described. Cellular lasers are foreseen as a promising tool to study numerous biological and biophysical phenomena. STATEMENT OF SIGNIFICANCE: Biolasers are generation of laser involving biological materials. Biomaterials, including single cells, can be engineered to incorporate laser probes or fluorescent proteins or fluorophores, and the resulting light emission can be coupled to optical resonator, allowing generation of cellular laser emission upon optical pumping. Unlike fluorescence, this stimulated emission is very sensitive and is capable of detecting small alterations in the optical property of the cells and their environment. In this review, recent development and applications of cellular lasers in the fields of in vitro and in vivo cell imaging, cell tracking, biosensing, and cell/tissue analysis are highlighted. Several challenges in developing cellular lasers including probe fabrication and biocompatibility as well as alteration of cellular environment are explained.

Recent Advances in Multidimensional (1D, 2D, and 3D) Composite Sensors Derived from MXene: Synthesis, Structure, Application, and Perspective

With the advent of the era of intelligent manufacturing, sensors, with various detection objects, have set off a wave of enthusiasm and reached new heights in medical treatment, intelligent industry, daily life, and so on. MXene, as an emerging family of 2D transition metal carbides/nitrides, possesses impressive electrical conductivity, outstanding structural controllability, and satisfying universality with other substrates. Consequently, MXene-based sensors with various functions show a booming growth based on great research potential of MXene. To promote the orderly and efficient development of MXene application in sensors, and further accelerate market-scale application of ideal sensors, in this review, a full range research effort on current MXene-based sensors is summarized. Starting with various synthesis methods of the raw material MXene, a comprehensive summary work along with 1D, 2D, or 3D MXene-based sensors on most recent works is put forward, including the preparation method, characteristic structure, and potential sensing application of each type of MXene-based composite sensors. Ultimately, insights of the opportunities and challenges on the strength of the current reported MXene-based sensor are given.

Imaging-Based Optofluidic Biolaser Array Encapsulated with Dynamic Living Organisms

Optofluidic biolasers have emerged as promising tools for biomedical analysis due to their strong light-matter interactions and miniaturized size. Recent developments in optofluidic lasers have opened a new Frontier in monitoring biological processes. However, most biolasers require precise recording of the lasing spectrum at the single cavity level, which limits its application in high-throughput applications. Herein, a microdroplet laser array encapsulated with living Escherichia coli was printed on highly reflective mirrors, where laser emission images were employed to reflect the dynamic changes in living organisms. The concept of image-based lasing analysis was proposed by quantifying the integrated pixel intensity of the lasing image from whispering-gallery modes. Finally, dynamic interactions between E. coli and antibiotic drugs were compared under fluorescence and laser emission images. The amplification that occurred during laser generation enabled the quantification of tiny biological changes in the gain medium. Laser imaging presented a significant increase in integrated pixel intensity by 2 orders of magnitude. Our findings demonstrate that image-based lasing analysis is more sensitive to dynamic changes than fluorescence analysis, paving the way for high-throughput on-chip laser analysis of living organisms.

Single-resonator, stable dual-longitudinal-mode optofluidic microcavity laser based on a hollow-core microstructured optical fiber

A single-resonator, stable dual-longitudinal-mode optofluidic microcavity laser based on a hollow-core microstructured optical fiber is proposed and experimentally demonstrated. The resonator and microfluidic channel are integrated in the hollow-core region of the fiber, inside which a hexagonal silica ring is used as the only resonator of the laser. Experimental results show that with mixing a small amount of Rhodamine B into a 1 mM Rhodamine 6G solution to form a dual-dye solution as a gain medium, the laser obtained by the method of lateral pumping can operate at dual longitudinal modes, with a threshold of 90 nJ/mm². By adjusting the concentration of Rhodamine B, the lasing wavelength of the laser and the power ratio of the two wavelengths can be controlled. And because the laser emission is co-excited by different kinds of dye molecules, the mode competition is diminished, enabling the simultaneously efficient optical gain and therefore lasing at dual longitudinal modes stably with a maximum lasing intensity fluctuation of 3.2% within 30 minutes even if the dual longitudinal modes have the same linear polarization states. This work can open up promising opportunities for diverse applications in biosensing and medical diagnosis with high sensitivity and integrated photonics with compact structure.

Review of biosensing with whispering-gallery mode lasers

Lasers are the pillars of modern optics and sensing. Microlasers based on whispering-gallery modes (WGMs) are miniature in size and have excellent lasing characteristics suitable for biosensing. WGM lasers have been used for label-free detection of single virus particles, detection of molecular electrostatic changes at biointerfaces, and barcode-type live-cell tagging and tracking. The most recent advances in biosensing with WGM microlasers are described in this review. We cover the basic concepts of WGM resonators, the integration of gain media into various active WGM sensors and devices, and the cutting-edge advances in photonic devices for micro- and nanoprobing of biological samples that can be integrated with WGM lasers.

Ultrasensitive optofluidic enzyme-linked immunosorbent assay by on-chip integrated polymer whispering-gallery-mode microlaser sensors

Optical whispering-gallery-mode (WGM) microcavities offer great promise in ultrasensitive biosensors because of their unique ability to enable resonant recirculation of light to achieve strong light-matter interactions in microscale volumes. However, it remains a challenge to develop cost-effective, high-performance WGM microcavity-based biosensing devices for practical disease diagnosis applications. In this paper, we present an optofluidic chip that is integrated with directly-printed, high-quality-factor (Q) polymer WGM microlaser sensors for ultrasensitive enzyme-linked immunosorbent assay (ELISA). Optical 3D μ-printing technology based on maskless ultraviolet lithography is developed to rapidly fabricate high-Q suspended-disk WGM microcavities. After deposition with a thin layer of optical gain material, low-threshold WGM microlasers are fabricated and then integrated together with optical fibres upon a microfluidic chip to achieve an optofluidic device. With flexible microfluidic technology, on-chip, integrated, WGM microlasers are further modified in situ with biomolecules on surface for highly selective biomarker detection. It is demonstrated that such an optofluidic biochip can measure horseradish peroxidase (HRP)-streptavidin, which is a widely used catalytic molecule in ELISA, via chromogenic reaction at the concentration level of 0.3 ng mL-1. Moreover, it enables on-chip optofluidic ELISA of the disease biomarker vascular endothelial growth factor (VEGF) at the extremely low concentration level of 17.8 fg mL-1, which is over 2 orders of magnitude better than the ability of current commercial ELISA kits.

Hyperboloid-Drum Microdisk Laser Biosensors for Ultrasensitive Detection of Human IgG

Whispering gallery mode (WGM) microresonators have been used as optical sensors in fundamental research and practical applications. The majority of WGM sensors are passive resonators that require complex systems, thereby limiting their practicality. Active resonators enable the remote excitation and collection of WGM-modulated fluorescence spectra, without requiring complex systems, and can be used as alternatives to passive microresonators. This paper demonstrates an active microresonator, which is a microdisk laser in a hyperboloid-drum (HD) shape. The HD microdisk lasers are a combination of a rhodamine B-doped photoresist and a silica microdisk. These HD microdisk lasers can be utilized for the detection of label-free biomolecules. The biomolecule concentration can be as low as 1 ag mL^-1 , whereas the theoretical detection limit of the biosensor for human IgG in phosphate buffer saline is 9 ag mL^-1 (0.06 a_M ). Additionally, the biosensors are able to detect biomolecules in an artificial serum, with a theoretical detection limit of 9 ag mL^-1 (0.06 a_M ). These results are approximately four orders of magnitude more sensitive than those for the typical active WGM biosensors. The proposed HD microdisk laser biosensors show enormous detection potential for biomarkers in protein secretions or body fluids.

Enhanced Biophotocurrent Generation in Living Photosynthetic Optical Resonator

Bioenergy from photosynthetic living organisms is a potential solution for energy-harvesting and bioelectricity-generation issues. With the emerging interest in biophotovoltaics, extracting electricity from photosynthetic organisms remains challenging because of the low electron-transition rate and photon collection efficiency due to membrane shielding. In this study, the concept of "photosynthetic resonator" to amplify biological nanoelectricity through the confinement of living microalgae (Chlorella sp.) in an optical micro/nanocavity is demonstrated. Strong energy coupling between the Fabry-Perot cavity mode and photosynthetic resonance offers the potential of exploiting optical resonators to amplify photocurrent generation as well as energy harvesting. Biomimetic models and living photosynthesis are explored in which the power is increased by almost 600% and 200%, respectively. Systematic studies of photosystem fluorescence and photocurrent are simultaneously carried out. Finally, an optofluidic-based photosynthetic device is developed. It is envisaged that the key innovations proposed in this study can provide comprehensive insights in biological-energy sciences, suggesting a new avenue to amplify electrochemical signals using an optical cavity. Promising applications include photocatalysis, photoelectrochemistry, biofuel devices, and sustainable optoelectronics.

Fiber-interface directional coupler inscribed by femtosecond laser for refractive index measurements

A novel fiber-interface directional waveguide coupler was inscribed on the surface of a coreless fiber by femtosecond laser, and was successfully applied to highly sensitive refractive index (RI) measurements. The primary arm was first inscribed to couple light from a lead-in single mode fiber to the fiber interface, then back to a lead-out single mode fiber. A side arm was inscribed parallel and in close proximity to the primary arm. Light propagating in the primary arm could then be efficiently coupled into the side arm when a phase-matching condition was met, which produced a dramatic spectral dip at the coupling wavelength. The proposed device achieved a sensitivity as high as ∼8249 nm/RIU over an RI range of 1.44-1.45, due to strong evanescent fields excited in fiber-interface waveguides. The proposed in-fiber directional coupler exhibits high mechanical strength, a compact configuration, and excellent RI sensitivity. As such, it has significant potential for practical applications in biochemical sensing.

Micro-/Nanofiber Optics: Merging Photonics and Material Science on Nanoscale for Advanced Sensing Technology

Micro-/nanofibers (MNFs) are optical fibers with diameters close to or below the wavelength of the guided light. These tiny fibers can offer engineerable waveguiding properties including optical confinement, fractional evanescent fields, and surface intensity, which is very attractive to optical sensing on the micro-/nano scale. In this review, we first introduce the basics of MNF optics and MNF optical sensors from physical and chemical to biological applications and review the progress and current status of this field. Then, we review and discuss hybrid MNF structures for advanced optical sensing by merging MNFs with functional structures including chemical indicators, quantum dots, dye molecules, plasmonic nanoparticles, 2-D materials, and optofluidic chips. Thirdly, we introduce the emerging trends in developing MNF-based advanced sensing technology for ultrasensitive, active, and wearable sensors and discuss the future prospects and challenges in this exciting research field. Finally, we end the review with a brief conclusion.

Facile microfluidic fabrication of monodispersed self-coupling microcavity with fine tunability

Whispering gallery mode (WGM) resonators have received extensive attention because of their nonlinear optical application in lasers and sensors. Optical microcavities are excellent candidates for constructing powerful microlasers and label-free biosensors, owing to their low optical losses and small size. However, most of these microcavity syntheses rely on sophisticated fabrication methods and cannot be manipulated easily. To achieve facile and versatile microcavity fabrication, we present a robust microfluidics method for monodispersed self-coupling optical microcavity fabrication with a fine tunability. The microcavity polydispersity was less than 3%. The optical microcavity size could be varied from 10 to 30 µm with a steady quality factor (Q) of approximately 1000. The lowest laser threshold that we obtained was 0.82 µJ with a microcavity size of 20 µm. The doped fluorescent dye concentration can be tuned precisely from 0.001 to 0.05 wt% to explore an optimized fluorescent background. The experimental results and theoretical simulation match well in terms of Q and the electrometric resonance field intensity. Compared with previous precise and practical fabrication methods, we have demonstrated a facile approach for versatile optical microcavity fabrication. This method can vary the microcavity materials, size, doped fluorescent dye concentration, WGM resonance spectrum, Q factor, and laser threshold easily to adapt to various circumstances and specific applications.

Coiled Optical Nanofiber for Optofluidic Absorbance Detection

A challenge for optofluidic absorbance detection is the high concentration limit of detection due to the short optical path length. Herein, we introduce a concept of utilizing the coiled optical nanofiber for highly sensitive and robust optofluidic absorbance detection. Investigated by measuring the absorbance of FeCl₃ solutions, the sensor shows a detection limit down to 10 μM with excellent reversibility in a concentration range of 0-5 mM. The sensitivity is 10-fold higher than that of standard absorbance measurement by using a 1 cm cuvette. Also, highly sensitive chloramphenicol sensing was demonstrated by using the enzyme-linked immunosorbent assay (ELISA) method, achieving a detection limit below 0.5 ng/L. The higher sensitivity and lower detection limit are caused by the large fractional power of evanescent field outside the nanofiber and the long detection length, which can effectively improve the absorption of the evanescent field, while the excellent reversibility is caused by the support of a polydimethylsiloxane (PDMS) pillar rather than by suspending the nanofiber in the microchannel. We envision that the present work may open up new opportunities for ultrasensitive chemical and biological sensing.

Simultaneous quantitative detection of multiple tumor markers in microfluidic nanoliter-volume droplets

We developed a simultaneous detection method for multiple tumor markers (TMs) in microfluidic droplets based on a multiple fluorescence resonance energy transfer (FRET) system. In this system, graphene oxide (GO) was used as the single quencher, while the multi-color quantum dots (QDs) labeled on different aptamers were employed as energy donors. When the aptamers were adsorbed onto GO due to the π-π stacking interaction, QDs were drawn to the surface of GO and quenched by it. Once the TMs were introduced, the corresponding fluorescence of QDs was recovered obviously owing to the preferential interaction of aptamers with the TMs. Here, the multi-FRET system was encapsulated into nanoliter-volume droplets by a simple T-junction microfluidic chip. The targets could be detected rapidly as the generated droplets flew through the integrated on-line detection zone. Three tumor markers, carcinoembryonic antigen (CEA), prostate-specific antigen (PSA) and vascular endothelial growth factor (VEGF₁₆₅) could be detected simultaneously in 33 nL-volume droplets, which is only 1/3000 of the volume of the sample consumed in the conventional fluorescence spectrophotometer. In addition, the signals corresponding to different TM targets in one nanoliter-volume droplet could be read out at the same time, and the signals could be output continuously owing to the uninterruptible generation of droplets. Even with a signal acquisition frequency of 55 droplets per minute, the multi-FRET biosensing system has linear ranges of 0.50-70 ng mL^-1 for CEA, 0.25-70 ng mL^-1 for PSA and 0.50-70 ng mL^-1 for VEGF₁₆₅. The detection limits of CEA, PSA and VEGF₁₆₅ were calculated to be 0.15 ng mL^-1, 0.035 ng mL^-1 and 0.11 ng mL^-1, respectively. The method was also validated by analyzing human serum sample dilutions. The proposed multi-FRET-based system has potential to become a powerful tool for rapid, low-cost and simultaneous detection of multiple tumor markers.