Recovery and purification of ionic liquids from solutions: a review

Catalytic Transformation of Carbohydrates into Renewable Organic Chemicals by Revering the Principles of Green Chemistry

Adherence to the principles of green chemistry in a biorefinery setting ensures energy efficiency, reduces the consumption of materials, simplifies reactor design, and rationalizes the process parameters for synthesizing affordable organic chemicals of desired functional efficacy and ingrained sustainability. The green chemistry metrics facilitate assessing the relative merits and demerits of alternative synthetic pathways for the targeted product(s). This work elaborates on how green chemistry has emerged as a transformative framework and inspired innovations toward the catalytic conversion of biomass-derived carbohydrates into fuels, chemicals, and synthetic polymers. Specific discussions have been incorporated on the judicious selection of feedstock, reaction parameters, reagents (stoichiometric or catalytic), and other synthetic auxiliaries to obtain the targeted product(s) in desired selectivity and yield. The prospects of a carbohydrate-centric biorefinery have been emphasized and research avenues have been proposed to eliminate the remaining roadblocks. The analyses presented in this review will steer to developing superior synthetic strategies and processes for envisaging a sustainable bioeconomy centered on biomass-derived carbohydrates.

Ionic Liquids in Metal, Photo-, Electro-, and (Bio) Catalysis

Ionic liquids (ILs) have unique physicochemical properties that make them advantageous for catalysis, such as low vapor pressure, non-flammability, high thermal and chemical stabilities, and the ability to enhance the activity and stability of (bio)catalysts. ILs can improve the efficiency, selectivity, and sustainability of bio(transformations) by acting as activators of enzymes, selectively dissolving substrates and products, and reducing toxicity. They can also be recycled and reused multiple times without losing their effectiveness. ILs based on imidazolium cation are preferred for structural organization aspects, with a semiorganized layer surrounding the catalyst. ILs act as a container, providing a confined space that allows modulation of electronic and geometric effects, miscibility of reactants and products, and residence time of species. ILs can stabilize ionic and radical species and control the catalytic activity of dynamic processes. Supported IL phase (SILP) derivatives and polymeric ILs (PILs) are good options for molecular engineering of greener catalytic processes. The major factors governing metal, photo-, electro-, and biocatalysts in ILs are discussed in detail based on the vast literature available over the past two and a half decades. Catalytic reactions, ranging from hydrogenation and cross-coupling to oxidations, promoted by homogeneous and heterogeneous catalysts in both single and multiphase conditions, are extensively reviewed and discussed considering the knowledge accumulated until now.

Techniques for recovery and recycling of ionic liquids: A review

Due to beneficial properties like non-flammability, thermal stability, low melting point and low vapor pressure, ionic liquids (ILs) have gained great interest from engineers and researchers in the past decades to replace conventional solvents. The superior characteristics of ILs make them promising for applications in fields as wide-ranging as pharmaceuticals, foods, nanoparticles synthesis, catalysis, electrochemistry and so on. To alleviate the high cost and environmental impact of ILs, various technologies have been reported to recover and purify the used ILs, as well as recycling the ILs. The aim of this article is to overview the state-of-the-art research on the recovery and recycling technologies for ILs including membrane technology, distillation, extraction, aqueous two-phase system (ATPS) and adsorption. In addition, challenges and future perspectives on ILs recovery are discussed. This review is expected to provide valuable insights for developing effective and environmentally friendly recovery methods for ILs.

Ionic liquids in green analytical chemistry-are they that good and green enough?

The widespread use of ionic liquids (ILs) as greener solvents in analytical sciences, especially in sample pretreatment, has focused attention on exploiting their enormous potential, not only on eliminating and improving the drawbacks faced by scientists. These ionic compounds with unique physicochemical properties can be tuned through smart synthesis, combining cations and anions, so that the compound exhibits excellent properties for its intended purpose. Ionic liquids are rightly referred to as designer solvents. Validation of a newly proposed analytical methods using ionic liquids, either in sample preparation or in further analysis, is a critical process to demonstrate that a particular analytical method is fit for purpose and provides reliable and accurate results. In addition, this article specially addressed the potential toxicity of ionic liquids with the modest goal of assisting researchers in this field by expanding their target areas.

Process Simulation and Optimization on Ionic Liquids

Ionic liquids (ILs) are promising alternative compounds that enable the development of technologies based on their unique properties as solvents or catalysts. These technologies require integrated product and process designs to select ILs with optimal process performances at an industrial scale to promote cost-effective and sustainable technologies. The digital era and multiscale research methodologies have changed the paradigm from experiment-oriented to hybrid experimental-computational developments guided by process engineering. This Review summarizes the relevant contributions (>300 research papers) of process simulations to advance IL-based technology developments by guiding experimental research efforts and enhancing industrial transferability. Robust simulation methodologies, mostly based on predictive COSMO-SAC/RS and UNIFAC models in Aspen Plus software, were applied to analyze key IL applications: physical and chemical CO2 capture, CO2 conversion, gas separation, liquid-liquid extraction, extractive distillation, refrigeration cycles, and biorefinery. The contributions concern the IL selection criteria, operational unit design, equipment sizing, technoeconomic and environmental analyses, and process optimization to promote the competitiveness of the proposed IL-based technologies. Process simulation revealed that multiscale research strategies enable advancement in the technological development of IL applications by focusing research efforts to overcome the limitations and exploit the excellent properties of ILs.

Microwave-assisted extraction with natural deep eutectic solvents for polyphenol recovery from agrifood waste: Mature for scaling-up?

Agrifood industries generate large amounts of waste that may result in remarkable environmental problems, such as soil and water contamination. Therefore, proper waste management and treatment have become an environmental, economic, and social challenge. Most of these wastes are exceptionally rich in bioactive compounds (e.g., polyphenols) with potential applications in the food, cosmetic, and pharmaceutical industries. Indeed, the recovery of polyphenols from agrifood waste is an example of circular bioeconomy, which contributes to the valorization of waste while providing solutions to environmental problems. In this context, unconventional extraction techniques at the industrial scale, such as microwave-assisted extraction (MAE), which has demonstrated its efficacy at the laboratory level for analytical purposes, have been suggested to search for more efficient recovery procedures. On the other hand, natural deep eutectic solvents (NADES) have been proposed as an efficient and green alternative to typical extraction solvents. This review aims to provide comprehensive insights regarding the extraction of phenolic compounds from agrifood waste. Specifically, it focuses on the utilization of MAE in conjunction with NADES. Moreover, this review delves into the possibilities of recycling and reusing NADES for a more sustainable and cost-efficient industrial application. The results obtained with the MAE-NADES approach show its high extraction efficiency while contributing to green practices in the field of natural product extraction. However, further research is necessary to improve our understanding of these extraction strategies, optimize product yields, and reduce overall costs, to facilitate the scaling-up.

A Multistep, Multicomponent Extraction and Separation Microfluidic Route to Recycle Water-Miscible Ionic Liquid Solvents

Recycling ionic liquid (IL) solvents can reduce the lifecycle cost of these expensive solvents. Liquid-liquid extraction is the most straightforward approach to purify IL solvents and is typically performed with an immiscible washing agent (e.g., water). Herein, we describe a recycling route for water-miscible ILs in which direct recycling is usually challenging. We use hydrophobic ILs as accommodating agents to draw the water-miscible IL from the aqueous washing stream. A biphasic slug flow of the mixed ILs and water is then separated by using a membrane. The water-miscible IL can then be drawn out from the mixed IL phase with acidified water and dried under vacuum. Both the water-miscible IL and the accommodating agent are then recycled. Here, we demonstrated a proof-of-concept of this process by recycling 1-butyl-3-methylimidazolium trifluoromethanesulfonate (BMIM-OTf) in the presence of the accommodating agent 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMIM-NTf2) and acidified water. We then demonstrated the capacity to recycle 1-butyl-1-methylpyrrolidinium triflate (BMPYRR-OTf) from a realistic synthetic application: Pt nanoparticle synthesis in the water-miscible IL.

Revolutionizing lignocellulosic biomass: A review of harnessing the power of ionic liquids for sustainable utilization and extraction

The potential for the transformation of lignocellulosic biomass into valuable commodities is rapidly growing through an environmentally sustainable approach to harness its abundance, cost-effectiveness, biodegradability, and environmentally friendly nature. Ionic liquids (ILs) have received considerable and widespread attention as a promising solution for efficiently dissolving lignocellulosic biomass. The fact that ILs can act as solvents and reagents contributes to their widespread recognition. In particular, ILs are desirable because they are inert, non-toxic, non-flammable, miscible in water, recyclable, thermally and chemically stable, and have low melting points and outstanding ionic conductivity. With these characteristics, ILs can serve as a reliable replacement for traditional biomass conversion methods in various applications. Thus, this comprehensive analysis explores the conversion of lignocellulosic biomass using ILs, focusing on main components such as cellulose, hemicellulose, and lignin. In addition, the effect of multiple parameters on the separation of lignocellulosic biomass using ILs is discussed to emphasize their potential to produce high-value products from this abundant and renewable resource. This work contributes to the advancement of green technologies, offering a promising avenue for the future of biomass conversion and sustainable resource management.

Changing Despicable Me: Potential replacement of azo dye yellow tartrazine for pequi carotenoids employing ionic liquids as high-performance extractors

Color is a crucial sensory attribute that guides consumer expectations. A high-performance pequi carotenoid extraction process was developed using ionic liquid-based ethanolic solutions and a factorial design strategy to search for a potential substitute for the artificial azo dye yellow tartrazine. All-trans-antheraxanthin was identified with HPLC-PAD-MSn for the first time in pequi samples. [BMIM][BF4] was the most efficient ionic liquid, and the maximization process condition was the solid-liquid ratio R(S/L) of 1:3, the co-solvent ratio R(IL/E) of 1:1 ([BMIM][BF4]: ethanol), and three cycles of extraction with 300 s each and yielded 107.90 μg carotenoids/g of dry matter. The ionic liquid-ethanolic solution recyclability was accomplished by freezing and precipitating with an average recovery of 79 %. In CIELAB parameters, pequi carotenoid extracted with [BMIM][BF4] was brighter and yellower than the artificial azo dye yellow tartrazine. A color change of 11.08 and a hue* difference of 1.26° were obtained. Furthermore, carotenoids extracted with [BMIM][BF4] showed antioxidant activity of 35.84 μmol of α-tocopherol. These findings suggest the potential of employing the pequi carotenoids to replace the artificial azo dye yellow tartrazine in foods for improved functional properties.

Ionic-Liquid-Based Nanofluids and Their Heat-Transfer Applications: A Comprehensive Review

Due to the improved thermophysical characteristics of ionic liquids (ILs), such as their strong ionic conductivity, negligible vapor pressure, and thermal stability at high temperatures, they are being looked at viable contender for future heat transfer fluids. Additionally, the dispersing nanoparticles can further improve the thermophysical characteristics and thermal performance of ionic liquids, which is one of the emerging research interests to increase the heat transfer rates of the thermal devices. The latest investigations about the utilization of ionic liquid nanofluids as a heat transfer fluid is summarized in this work. These summaries are broken down into three types: (a) the thermophysical parameters including thermal conductivity, viscosity, density, and specific heat of ionic liquids (base fluids), (b) the thermophysical properties like thermal conductivity, viscosity, density, and viscosity of ionic liquids based nanofluids (IL nanofluids), and (iii) utilization of IL nanofluids as a heat transfer fluid in the thermal devices. The techniques for measuring the thermophysical characteristics and the synthesis of IL nanofluids are also covered. The suggestions for potential future research directions for IL nanofluids are summarized.

Separation performance and agglomeration behavior analysis of solution crystallization in food engineering

This study employed solution crystallization in food engineering to prepare a high-purity vitamin intermediate, optimize its crystal morphology and regulate its particle size distribution. Model analysis was performed to investigate the quantitative correlations between the process variables and target parameters, indicating the substantial effect of temperature on separation performance. Under optimal conditions, the product purity exceeded 99.5%, which meets the requirement of the subsequent synthesis process. A high crystallization temperature reduced the agglomeration phenomenon and increased particle liquidity. Herein, we also proposed a temperature cycling strategy and a gassing crystallization routine to optimize the particle size. The results illustrated that the synergistic control of temperature and gassing crystallization could substantially improve the separation process. Overall, based on a high separation efficiency, this study combined model analysis and process intensification pathways to explore the process parameters on product properties such as purity, crystal morphology, and particle size distribution.

Transition Mechanism from the Metastable Two-Dimensional Gel to the Stable Three-Dimensional Crystal of Imidazolium-Based Ionic Liquids

One important quest for making high quality materials with amphiphiles is to understand how a disordered self-assembly changes to a stable crystalline state. Herein, we addressed the basic question by investigating the phase transition mechanism of imidazolium-based ionic liquid (IL) [C16mim]Br, using time-resolved small- and wide-angle X-ray scattering (SAXS-WAXS), differential scanning calorimetry, and Fourier transform infrared spectroscopy techniques. Totally, a hexagonal phase, two lamellar-gel phases, and three lamellar-crystalline phases were observed, showing the special polymorphism of the system. It was demonstrated that at low concentrations the two-dimensional gel phase (Lβ1) transforms into the most stable lamellar-crystal phase (Lc3) through two intermediate crystalline phases Lc1 and Lc2. At high concentrations, the Lβ1 phase changes to a condensed lamellar gel phase (Lβ2) before changing to Lc2 and eventually to Lc3. Comparative studies using [C16mim]Cl and [C16mim]NO3 unveiled that the interactions between the counterions and the headgroups of the IL, as well as the dehydration process, govern the nucleation process of Lc3 and thus the formation of the crystal. The in-depth investigation on the transition mechanism and the phase polymorphism in the present work advances our understanding of the crystallization of amphiphilic ionic liquids in dispersions and would promote future applications.

The key role of pretreatment for the one-step and multi-step conversions of European lignocellulosic materials into furan compounds

Nowadays, an increased interest from the chemical industry towards the furanic compounds production, renewable molecules alternatives to fossil molecules, which can be transformed into a wide range of chemicals and biopolymers. These molecules are produced following hexose and pentose dehydration. In this context, lignocellulosic biomass, owing to its richness in carbohydrates, notably cellulose and hemicellulose, can be the starting material for monosaccharide supply to be converted into bio-based products. Nevertheless, processing biomass is essential to overcome the recalcitrance of biomass, cellulose crystallinity, and lignin crosslinked structure. The previous reports describe only the furanic compound production from monosaccharides, without considering the starting raw material from which they would be extracted, and without paying attention to raw material pretreatment for the furan production pathway, nor the mass balance of the whole process. Taking account of these shortcomings, this review focuses, firstly, on the conversion potential of different European abundant lignocellulosic matrices into 5-hydroxymethyl furfural and 2-furfural based on their chemical composition. The second line of discussion is focused on the many technological approaches reported so far for the conversion of feedstocks into furan intermediates for polymer technology but highlighting those adopting the minimum possible steps and with the lowest possible environmental impact. The focus of this review is to providing an updated discussion of the important issues relevant to bringing chemically furan derivatives into a market context within a green European context.

Ionic liquid recovery and recycling via electrodialysis in biomass processing: An economical assessment

Extravagant price and lack of high-efficiency recovery technology limited scale-up utilization of ionic liquids. Ionic liquids recovery with electrodialysis-based techniques has caught wide concern due to membrane-based characteristic. Economical assessment for electrodialysis-based ionic liquid recovery and recycling in biomass processing was performed by determining influence of equipment-related and financial-related factors with sensitivity analysis for each factor. Overall recovery cost of 1-ethyl-3-methylimidazolium acetate, choline acetate, 1-butyl-3-methylimidazolium hydrogen sulphate and 1-ethyl-3-methylimidazolium hydrogen sulfate varied within 0.75-1.96 $/Kg, 0.99-3.00 $/Kg, 1.37-2.74 $/Kg and 1.15-2.89 $/Kg when factors changed within investigated range. Fold of membrane cost, factor of membrane stack cost, factor of auxiliary equipment cost, factor of annual maintenance cost and annual interest rate of loan were positively related with recovery cost. While percentage of annual elapsed time and loan period were negatively correlated with recovery cost. Economical assessment confirmed economic efficiency of electrodialysis for ionic liquids recovery and recycling in biomass processing.

Advances of Imidazolium Ionic Liquids for the Extraction of Phytochemicals from Plants

In this review, we present the research from 2013 to 2022 about the character of ionic liquids, the categories of phytochemicals, and the reasons for selecting imidazolium ionic liquids for phytochemical extraction. Then we introduce the structural formulae of the imidazolium ionic liquids commonly used in the extraction of phytochemicals, the methods used to prepare imidazolium ionic liquids, and a comprehensive introduction of how imidazolium ionic liquids are applied to extract phytochemicals from plants. Importantly, we discuss the strategies for studying the extraction mechanisms of imidazolium ionic liquids to extract phytochemicals, and the recovery methods regarding imidazolium ionic liquids and their recyclability are analyzed. Then the toxicity in imidazolium ionic liquids is pointed out. Finally, the challenges and prospects of extracting phytochemicals by imidazolium ionic liquids are summarized, and they are expected to provide some references for researchers.

Challenges in Using Ionic Liquids for Cellulosic Ethanol Production

The growing need to expand the use of renewable energy sources in a sustainable manner, providing greater energy supply security and reducing the environmental impacts associated with fossil fuels, finds in the agricultural by-product bioethanol an economically viable alternative with significant expansion potential. In this regard, a dramatic boost in the efficiency of processes already in place is required, reducing costs, industrial waste, and our carbon footprint. Biofuels are one of the most promising alternatives to massively produce energy sustainably in a short-term period. Lignocellulosic biomass (LCB) is highly recalcitrant, and an effective pretreatment strategy should also minimize carbohydrate degradation by diminishing enzyme inhibitors and other products that are toxic to fermenting microorganisms. Ionic liquids (ILs) have been playing an important role in achieving cleaner processes as a result of their excellent physicochemical properties and outstanding performance in the dissolution and fractionation of lignocellulose. This review provides an analysis of recent advances in the production process of biofuels from LCB using ILs as pretreatment and highlighting techniques for optimizing and reducing process costs that should help to develop robust LCB conversion processes.

Review of chemical pretreatment of lignocellulosic biomass using low-liquid and low-chemical catalysts for effective bioconversion

Chemical pretreatment of lignocellulosic biomass (LCB) is essential for effective biological conversion in subsequent steps to produce biofuels or biochemicals. For effective pretreatment, high lignin content and its recalcitrant nature of LCB are major factors influencing bioconversion, especially lignin is known to be effectively solubilized by alkaline, organic, and deep eutectic solvents, ionic liquids, while hemicellulose is effectively dissolved by various acid catalysts and organic solvents. Depending on the pretreatment method/catalyst used, different pretreatment process scheme should be applied with different amounts of catalyst and water inputs to achieve a satisfactory effect. In addition, the amount of processing water required in the following processes such as washing, catalyst recovery, and conditioning after pretreatment is critical factor for scale-up (commercialization). In this review, the amount of catalyst and/or water used, and the effect of pretreatment, properties of the products, and recovery of liquid are also discussed.

Thermoresponsive Ionic Liquid with Different Cation-Anion Pairs as Draw Solutes in Forward Osmosis

We synthesized various phosphonium- and ammonium-based ionic liquids (ILs), using benzenesulfonate (BS) and 4-methylbenzenesulfonate (MBS) to establish the criteria for designing an ideal draw solute in a forward osmosis (FO) system. Additionally, the effects of monocationic, dicationic, and anionic species on FO performance were studied. Monocationic compounds ([P₄₄₄₄][BS], [P₄₄₄₄][MBS], [N₄₄₄₄][BS], and [N₄₄₄₄][MBS]) were obtained in one step via anion exchange. Dicationic compounds ([(P₄₄₄₄)₂][BS], [(P₄₄₄₄)₂][MBS], [(N₄₄₄₄)₂][BS], and [(N₄₄₄₄)₂][MBS]) were prepared in two steps via a Menshutkin SN₂ reaction and anion exchange. We also investigated the suitability of ILs as draw solutes for FO systems. The aqueous [P₄₄₄₄][BS], [N₄₄₄₄][BS], [N₄₄₄₄][MBS], and [(N₄₄₄₄)₂][BS] solutions did not exhibit thermoresponsive behavior. However, 20 wt% [P₄₄₄₄][MBS], [(P₄₄₄₄)₂][BS], [(P₄₄₄₄)₂][MBS], and [(N₄₄₄₄)₂][MBS] had critical temperatures of approximately 43, 33, 22, and 60 °C, respectively, enabling their recovery using temperature. An increase in IL hydrophobicity and bulkiness reduces its miscibility with water, demonstrating that it can be used to tune its thermoresponsive properties. Moreover, the FO performance of 20 wt% aqueous [(P₄₄₄₄)₂][MBS] solution was tested for water flux and found to be approximately 10.58 LMH with the active layer facing the draw solution mode and 9.40 LMH with the active layer facing the feed solution.

Influence of the anionic structure and central atom of a cation on the properties of LCST-type draw solutes for forward osmosis

Thermo-responsive ionic compounds were synthesized to examine if they have a powerful ability to draw solutes for forward osmosis (FO). The investigated compounds were tetrabutylammonium benzenesulfonate, tetrabutylphosphonium benzenesulfonate, tetrabutylammonium 2-naphthalenesulfonate, and tetrabutylphosphonium 2-naphthalenesulfonate (abbreviated as [N₄₄₄₄][BS], [P₄₄₄₄][BS], [N₄₄₄₄][NS], and [P₄₄₄₄][NS]). The lower critical solution temperature (LCST) characteristics of the materials that formed the monocyclic aromatic compound [BS] were not confirmed; however, the LCSTs of others that formed the bicyclic aromatic compound [NS] were confirmed to be approximately 37 °C ([N₄₄₄₄][NS]) and 19 °C ([P₄₄₄₄][NS]) at 20 wt% in aqueous solutions; this is valued in reducing the energy required for recovery of the draw solute. In addition, it suggests that ammonium-based ionic compounds have a higher recovery temperature than phosphonium-based ionic compounds. When an active layer was oriented to a draw solution (AL-DS mode) and using 20 wt% aqueous [N₄₄₄₄][NS] draw solution at room temperature, water and reverse solute fluxes were about 3.07 LMH and 0.58 gMH, respectively. Thus, this is the first study to investigate structural transformations of the anion and central atom of the cation and to examine prospective draw solutes of the FO system in this series.

Thermo-responsive ionic compounds having lower critical solution temperature were utilized as a draw solute for eco-sustainable forward osmosis.

Preconcentration of Superbase Ionic Liquid from Aqueous Solution by Membrane Filtration

Certain organic superbase ionic liquids (ILs) have shown good cellulose dissolution and fiber regeneration performance, allowing us to obtain high-quality textile fibers. However, there is a lack regarding the IL recovery from the spinning bath and its purification, which is essential for the economic viability of the process. Aiming to understand methods to separate ILs from water for reuse/recycle, the use of pressure-driven membrane processes to recycle ionic liquids from aqueous solution was investigated. The recovery of two superbase ILs, 7-methyl-1,5,7-triazabicyclo[4.4.0]dec-5-enium acetate, [mTBDH][OAc], and 5-methyl-1,5,7-triaza-bicyclo[4.3.0]non-6-enium acetate, [mTBNH][OAc], were studied using different types of membranes (microfiltration, ultrafiltration, nanofiltration, and reverse osmosis, RO). Additionally, pressure, IL concentration, temperature, and multicycle effect were evaluated. Significant retentions (>45%) were obtained for the nanofiltration and RO membranes (NF270-NF and BW30LE-RO). The increase in pressure and temperature resulted in an increase in volumetric flux and a decrease in IL retention. On the other hand, IL concentration decreased the volumetric flow and rejection. For the serial filtration tests, a three-fold ionic liquid concentration was achieved, for a maximum concentration of 14 wt % of the ionic liquid. The membrane filtration methodology proved to be an efficient technique for carrying out the preconcentration of the IL from dilute solutions.

Enabling Sustainable Chemistry with Ionic Liquids and Deep Eutectic Solvents: A Fad or the Future?

Ionic liquids (ILs) and deep eutectic solvents (DESs) debuted with a promise of a superior sustainability footprint due to their low vapor pressure. However, their toxicity and high cost compromise this footprint, impeding their real-world applications. Fortunately, their property tunability through a rational selection of precursors, including bioderived ones, provides a strategy to ameliorate toxicity, lower cost, and endow new functions. This Review discusses whether ILs and DESs are sustainable solvents and how they contribute to sustainable chemical processes.

Integrated Approach to Extract and Purify Proteins from Honey by Ionic Liquid-Based Three-Phase Partitioning

The purification of value-added compounds by three-phase partitioning (TPP) is a promising alternative to conventional processes since the target compound can be easily recovered from the liquid-liquid interphase. Although this technique has been successfully applied to the recovery of proteins, the minimization of the use of salts and solvents must be pursued to improve the overall process sustainability. Accordingly, we have here investigated the use of biobased glycine-betaine ionic liquids (IL) directly with honey, a carbohydrate-rich matrix, as phase-forming components of TPP systems. These ILTPP systems were applied in the purification of major royal jelly proteins (MRJPs) from honey. The results obtained show that MRJPs mostly precipitate in the ILTPP interphase, with a recovery yield ranging between 82.8% and 97.3%. In particular, MRJP1 can be obtained with a purity level up to 90.1%. Furthermore, these systems allow the simultaneous separation of antioxidants and carbohydrates to different liquid phases. The proposed approach allows the separation of proteins, antioxidants, and carbohydrates from honey in a single step, while using only ILs and a real carbohydrate-rich matrix, thus being sustainable TPP processes.

Electrodialytic Universal Synthesis of Highly Pure and Mixed Ionic Liquids

Ionic liquids (ILs) have attracted significant attention from researchers in various fields as a result of their unique properties. As new and important applications are identified for these materials, there is also a drive to develop methods for accessing a wider range of ILs. However, despite this demand, only a few techniques have so far been reported and, more importantly, general but efficient processes for IL synthesis have been lacking. Thus, it would be beneficial to devise a cost-effective, environmentally friendly means of producing a wide variety of pure ILs. The present work demonstrates a general purpose electrodialysis approach to the formation of highly pure ILs, based on the formation of nine different ILs from various combinations of cations and anions. In each case, the IL is obtained with a purity of greater than 99%. This method offers the advantages of avoiding the use of hazardous organic solvents and eliminating tedious and costly purification processes. Unlike conventional methods, this membrane-based technology also prevents the generation of side products. Mixed ILs have many potential applications, and the present technique readily generates various mixed ILs based on a simple adjustment of the applied current.

Recovery of the N,N-Dibutylimidazolium Chloride Ionic Liquid from Aqueous Solutions by Electrodialysis Method

Ionic liquids (ILs), named also as liquid salts, are compounds that have unique properties and molecular architecture. ILs are used in various industries; however, due to their toxicity, the ILs’ recovery from the postreaction solutions is also a very important issue. In this paper, the possibility of 1,3-dialkylimidazolium IL, especially the N,N-dibutylimidazolium chloride ([C₄C₄IM]Cl) recovery by using the electrodialysis (ED) method was investigated. The influence of [C₄C₄IM]Cl concentration in diluate solution on the ED efficiency was determined. Moreover, the influence of IL on the ion-exchange membranes’ morphology was examined. The recovery of [C₄C₄IM]Cl, the [C₄C₄IM]Cl flux across membranes, the [C₄C₄IM]Cl concentration degree, the energy consumption, and the current efficiency were determined. The results showed that the ED allows for the [C₄C₄IM]Cl recovery and concentration from dilute solutions. It was found that the [C₄C₄IM]Cl content in the concentrates after ED was above three times higher than in the initial diluate solutions. It was noted that the ED of solutions containing 5–20 g/L [C₄C₄IM]Cl allows for ILs recovery in the range of 73.77–92.45% with current efficiency from 68.66% to 92.99%. The [C₄C₄IM]Cl recovery depended upon the initial [C₄C₄IM]Cl concentration in the working solution. The highest [C₄C₄IM]Cl recovery (92.45%) and ED efficiency (92.99%) were obtained when the [C₄C₄IM]Cl content in the diluate solution was equal 20 g/L. Presented results proved that ED can be an interesting and effective method for the [C₄C₄IM]Cl recovery from the dilute aqueous solutions.

Upcycling agro-industrial blueberry waste into platform chemicals and structured materials for application in marine environments

Blueberry pruning waste (BPw), sourced as residues from agroforestry operations in Chile, was used to produce added-value products, including platform chemicals and materials. BPw fractionation was implemented using biobased solvents (γ-valerolactone, GVL) and pyrolysis (500 °C), yielding solid fractions that are rich in phenols and antioxidants. The liquid fraction was found to be enriched in sugars, acids, and amides. Alongside, filaments and 3D-printed meshes were produced via wet spinning and Direct-Ink-Writing (DIW), respectively. For the latter purpose, BPw was dissolved in an ionic liquid, 1-ethyl-3-methylimidazolium acetate ([emim][OAc]), and regenerated into lignocellulose filaments with highly aligned nanofibrils (wide-angle X-ray scattering) that simultaneously showed extensibility (wet strain as high as 39%). BPw-derived lignocellulose filaments showed a tenacity (up to 2.3 cN dtex-1) that is comparable to that of rayon fibers and showed low light reflectance (R ES factor <3%). Meanwhile, DIW of the respective gels led to meshes with up to 60% wet stretchability. The LCF and meshes were demonstrated to have reliable performance in marine environments. As a demonstration, we show the prospects of replacing plastic cords and other materials used to restore coral reefs on the coast of Mexico.

A review on enzymatic acylation as a promising opportunity to stabilizing anthocyanins

Anthocyanins are naturally occurring bioactive compounds found mainly in fruits, vegetables, and grains. They are usually extracted due to their biological properties and great potential for technological applications. These compounds have characteristic pH-dependent colorations that are natural dyes since they come in different colors. However, they are susceptible to processing conditions, remarkably light, temperature, and oxygen. The acylated anthocyanins showed better stability characteristics, and therefore, an acylation process of these compounds could improve their applications. The enzymatic acylation was effective and showed promising results. The current review provides an overview of the works that performed enzymatic acylation of anthocyanins and studies on the stability, antioxidant activity, and lipophilicity. In general, enzymatically acylated anthocyanins showed better stability to light and temperature than non-acylated compounds. In addition, they were liposoluble, a characteristic that allows their addition to products with lipid matrices. The results showed that these compounds formed by enzymatic acylation have perspectives of application mainly as natural colorants in food products. Therefore, the enzymatic acylation of anthocyanins appears viable to increase the industrial applicability of anthocyanins. There are still some gaps to be filled in process optimization, the reuse of enzymes, and toxicity analysis of the acylated compounds formed.

Application of Ionic Liquids for the Recycling and Recovery of Technologically Critical and Valuable Metals

Population growth has led to an increased demand for raw minerals and energy resources; however, their supply cannot easily be provided in the same proportions. Modern technologies contain materials that are becoming more finely intermixed because of the broadening palette of elements used, and this outcome creates certain limitations for recycling. The recovery and separation of individual elements, critical materials and valuable metals from complex systems requires complex energy-consuming solutions with many hazardous chemicals used. Significant pressure is brought to bear on the improvement of separation and recycling approaches by the need to balance sustainability, efficiency, and environmental impacts. Due to the increase in environmental consciousness in chemical research and industry, the challenge for a sustainable environment calls for clean procedures that avoid the use of harmful organic solvents. Ionic liquids, also known as molten salts and future solvents, are endowed with unique features that have already had a promising impact on cutting-edge science and technologies. This review aims to address the current challenges associated with the energy-efficient design, recovery, recycling, and separation of valuable metals employing ionic liquids.

Efficient and selective adsorption of Au(iii), Pt(iv), and Pd(ii) by a radiation-crosslinked poly(ionic liquid) gel

A PIL gel was prepared for Au(iii), Pt(iv), and Pd(ii) recovery. The PIL gel exhibited fast adsorption rates and excellent selectivity for target ions. Furthermore, the gel could efficiently separate Au(iii) from gold slag leaching solution.

Utilization of Cellulose to Its Full Potential: A Review on Cellulose Dissolution, Regeneration, and Applications

As the most abundant natural polymer, cellulose is a prime candidate for the preparation of both sustainable and economically viable polymeric products hitherto predominantly produced from oil-based synthetic polymers. However, the utilization of cellulose to its full potential is constrained by its recalcitrance to chemical processing. Both fundamental and applied aspects of cellulose dissolution remain active areas of research and include mechanistic studies on solvent-cellulose interactions, the development of novel solvents and/or solvent systems, the optimization of dissolution conditions, and the preparation of various cellulose-based materials. In this review, we build on existing knowledge on cellulose dissolution, including the structural characteristics of the polymer that are important for dissolution (molecular weight, crystallinity, and effect of hydrophobic interactions), and evaluate widely used non-derivatizing solvents (sodium hydroxide (NaOH)-based systems, N,N-dimethylacetamide (DMAc)/lithium chloride (LiCl), N-methylmorpholine-N-oxide (NMMO), and ionic liquids). We also cover the subsequent regeneration of cellulose solutions from these solvents into various architectures (fibers, films, membranes, beads, aerogels, and hydrogels) and review uses of these materials in specific applications, such as biomedical, sorption, and energy uses.

Study on the Effectiveness of Simultaneous Recovery and Concentration of 1-Ethyl-3-methylimidazolium Chloride Ionic Liquid by Electrodialysis with Heterogeneous Ion-Exchange Membranes

Due to the extensive range of ionic liquids (ILs) used in industry, an efficient recovery method is needed. In this study, the effectiveness of a simultaneous concentration and recovery method was investigated for 1-ethyl-3-methylimidazolium chloride ([Emim]Cl), an IL that was recovered using electrodialysis (ED). The optimal operational parameters for electrodialytic recovery were determined empirically. The variables that were investigated included the concentration of IL, applied voltage, linear flow velocity and the diluate-to-concentrate volume ratio. The recovery of [Emim]Cl, the concentration degree, the [Emim]Cl flux across membranes, the current efficiency, as well as the energy consumption were determined. The results of the experiments confirmed that [Emim]Cl concentration and recovery can be achieved using ED. The highest ED efficiency was obtained when a 2 V electric potential per one membrane pair was applied, using a 2 cm/s linear flow velocity, and by adjusting to 0.2 M IL in the feed solution. By using ED, a 2.35-fold concentration of [Emim]Cl with a recovery of 90.4% could be achieved when the diluate-to-concentrate volume ratio was 2. On the other hand, a 3.35-fold concentration of [Emim]Cl with a recovery of 81.7% could be obtained when the diluate-to-concentrate volume ratio was increased to 5.

Advances Brought by Hydrophilic Ionic Liquids in Fields Involving Pharmaceuticals

The negligible volatility and high tunable nature of ionic liquids (ILs) have been the main drivers of their investigation in a wide diversity of fields, among which is their application in areas involving pharmaceuticals. Although most literature dealing with ILs is still majorly devoted to hydrophobic ILs, evidence on the potential of hydrophilic ILs have been increasingly provided in the past decade, viz., ILs with improved therapeutic efficiency and bioavailability, ILs with the ability to increase drugs' aqueous solubility, ILs with enhanced extraction performance for pharmaceuticals when employed in biphasic systems and other techniques, and ILs displaying low eco/cyto/toxicity and beneficial biological activities. Given their relevance, it is here overviewed the applications of hydrophilic ILs in fields involving pharmaceuticals, particularly focusing on achievements and advances witnessed during the last decade. The application of hydrophilic ILs within fields involving pharmaceuticals is here critically discussed according to four categories: (i) to improve pharmaceuticals solubility, envisioning improved bioavailability; (ii) as IL-based drug delivery systems; (iii) as pretreatment techniques to improve analytical methods performance dealing with pharmaceuticals, and (iv) in the recovery and purification of pharmaceuticals using IL-based systems. Key factors in the selection of appropriate ILs are identified. Insights and perspectives to bring renewed and effective solutions involving ILs able to compete with current commercial technologies are finally provided.

The green solvent: a critical perspective

Solvents are important in most industrial and domestic applications. The impact of solvent losses and emissions drives efforts to minimise them or to avoid them completely. Since the 1990s, this has become a major focus of green chemistry, giving rise to the idea of the 'green' solvent. This concept has generated a substantial chemical literature and has led to the development of so-called neoteric solvents. A critical overview of published material establishes that few new materials have yet found widespread use as solvents. The search for less-impacting solvents is inefficient if carried out without due regard, even at the research stage, to the particular circumstances under which solvents are to be used on the industrial scale. Wider sustainability questions, particularly the use of non-fossil sources of organic carbon in solvent manufacture, are more important than intrinsic 'greenness'. While solvency is universal, a universal solvent, an alkahest, is an unattainable ideal.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10098-021-02188-8.

Ionic Liquid-Assisted Grinding: An Electrophilic Fluorination Benchmark

We demonstrated the influence of liquid additives on the rate and selectivity of mechanochemical fluorination of aromatic and 1,3-dicarbonyl compounds with F-TEDA-BF4. Substoichiometric catalytic quantities of ionic liquids speed up the reaction. We proposed an improved protocol for ionic liquids-assisted fluorination that allows easy and efficient isolation of fluorinated products by vacuum sublimation. A careful choice of additive results in high yields of fluorinated products and low E-factor for the overall process. Here, we report a benchmarking study of various ionic liquids in comparison with representative molecular solvents. A lower viscosity of ionic liquid additive is typically associated with higher yields and a higher degree of difluorination. Ionic liquids with fluorous anions (triflate and triflimide) are shown to be the most efficient catalysts for ionic liquid-assisted grinding.

Chemical Vapor Deposition of Ionic Liquids for the Fabrication of Ionogel Films and Patterns

Film deposition and high-resolution patterning of ionic liquids (ILs) remain a challenge, despite a broad range of applications that would benefit from this type of processing. Here, we demonstrate for the first time the chemical vapor deposition (CVD) of ILs. The IL-CVD method is based on the formation of a non-volatile IL through the reaction of two vaporized precursors. Ionogel micropatterns can be easily obtained via the combination of IL-CVD and standard photolithography, and the resulting microdrop arrays can be used as microreactors. The IL-CVD approach will facilitate leveraging the properties of ILs in a range of applications and microfabricated devices.

Evaluation of Aqueous Biphasic Electrophoresis System Based on Halide-Free Ionic Liquids for Direct Recovery of Keratinase

Aqueous biphasic electrophoresis system (ABES) incorporates electric fields into the biphasic system to separate the target biomolecules from crude feedstock. Ionic liquid (IL) is regarded as an excellent candidate as the phase-forming components for ABES because of the great electrical conductivity, which can promote the electromigration of biomolecules in ABES, and thereby enhances the separation efficiency of the target biomolecules from crude feedstock. The application of electric fields to the conventional biphasic system expedites the phase settling time of the biphasic system, which eases the subsequent scaling-up steps and reduces the overall processing time of the recovery process. Alkyl sulphate-based IL is a green and economical halide-free surfactant when compared to the other halide-containing IL. The feasibility of halide-free IL-based ABES to recover Kytococcus sedentarius TWHK01 keratinase was studied. Optimum partition coefficient (Ke = 7.53 ± 0.35) and yield (YT = 80.36% ± 0.71) were recorded with IL-ABES comprised of 15.0% (w/w) [EMIM][ESO4], 20.0% (w/w) sodium carbonate and 15% (w/w) crude feedstock. Selectivity (S) of 5.75 ± 0.27 was obtained with the IL-ABES operated at operation time of 5 min with 10 V voltage supplied. Halide-free IL is proven to be a potential phase-forming component of IL-ABES for large-scale recovery of keratinase.