Kinetic study of hydroxyl radical formation in a continuous hydroxyl generation system

Enhanced degradation of ciprofloxacin in water using ternary photocatalysts TiO2/SnO2/g-C3N4 under UV, visible, and solar light

In this study, we report on the synthesis of ternary photocatalysts comprising TiO2/SnO2/g-C3N4 for the degradation of ciprofloxacin (CIP) in water. SnO2 nanoparticles were synthesized via the sol-gel method, while g-C3N4 was obtained through melamine calcination. Commercial TiO2 and SnO2 nanopowders were also used. The heterojunctions were synthesized via the wet impregnation method. The photocatalysts were characterized via various techniques, including XRD, TEM, STEM, FTIR, N2 adsorption, UV-Vis DR, and hole tests. Photocatalytic degradation tests of CIP were carried out under UV, visible, and solar radiation. The P25/npA/g-C3N4 (90/10) material exhibited the best performance, achieving CIP degradation of over 97%. The synthesized materials demonstrated excellent initial adsorption of CIP, around 30%, which facilitated subsequent degradation. Notably, the CIP photocatalytic degradation tests performed under solar radiation showed a synergistic effect between the base materials and carbon nitride in highly energetic environments. These results highlight the effectiveness of ternary photocatalysts TiO2/SnO2/g-C3N4 for CIP degradation, particularly under solar radiation.

Ultrafast spectroscopic studies on the interaction of reactive oxygen species with a probe impregnated in nanoscopic and microscopic matrix formulation

Reactive oxygen species (ROS) plays important role to maintain homeostasis in living bodies. Here we have studied interaction of ROS generated from hydrogen peroxide (H2O2) with a well-known spectroscopic probe Rose Bengal (RB) encapsulated in nanoscopic sodium dodecyl sulphate (SDS) micelles in aqueous medium and entrapped in microscopic nylon 66 solid matrix generated using electrospinning technique. A detailed spectroscopic characterization of ROS with SDS encapsulated RB (RB-SDS) shows efficient interaction compared to that in bulk medium. The time resolved analysis on the probe based on femtosecond resolved 2D-spectrum time images collected from streak camera reveal the simultaneous existence of an ultrafast electron (∼6 ps) and a hole transfer mechanism (∼93 ps) resulting from generation of hydroxyl radicals through photobleaching of the probe in presence of H2O2. Based on the spectroscopic and time resolved studies of RB in bulk and in restricted (SDS) medium, we have further translated it for the development of an in-field prototype device which utilizes RB as a ROS sensor impregnated in a nylon thin film. The microscopic nylon solid matrix characterized by scanning electron microscope (SEM) shows porous structure for holding sample containing ROS. Our study quantitatively measures the amount of ROS by using RB embedded microfiber membrane. Thus, our developed prototype device based on RB embedded on the nylon matrix would be beneficial for the potential use in quantification of ROS in extracellular fluids and food materials.

Pd@Bi2Ru2O7/BiVO4 Z-Scheme Heterojunction Nanocomposite Photocatalyst for the Degradation of Trichloroethylene

Photocatalytic degradation of chlorinated persistent organic pollutants is a very challenging process due to the high redox potential of the C-Cl bond that requires wide band gap catalysts that are activated under UV light. Designing a Z-scheme heterojunction between visible light-activated metal oxides with compatible band gaps enables these redox potentials. Herein, we report the design of a pyrochlore/Aurivillius Z-scheme heterojunction to enhance the photocatalytic activity of BiVO4 for the degradation of trichloroethylene. We prepared Bi2Ru2O7/BiVO4 heterostructured photocatalysts by a controlled hydrothermal approach. Upon optimizing the Bi2Ru2O7 ratio to 1.0 wt %, the heterostructured photocatalyst demonstrated enhanced activity in the degradation of trichloroethylene (TCE) under simulated sunlight irradiation compared to bare BiVO4 and Bi2Ru2O7, respectively. Decorating the surface of the catalyst with palladium nanodomains to create the Pd@Bi2Ru2O7/BiVO4 nanocomposite showed a substantial increase in the photocatalytic degradation of TCE. The material characterization indicated that the architecture of the material provides a synergy of enhancing the redox potential of the photocatalyst and improving the charge carrier dynamics. Furthermore, the photoelectrochemical characterization confirmed that the dual heterojunctions in the Pd@Bi2Ru2O7/BiVO4 nanocomposite resulted in improved interfacial charge carrier transfer and enhanced the electron/hole separation efficiency compared to the nonpalladized catalysts. This work provides a promising approach for band gap engineering of visible light photocatalysts for the degradation of halogenated persistent organic pollutants.

Advanced electrocatalytic redox processes for environmental remediation of halogenated organic water pollutants

Halogenated organic compounds are widespread, and decades of heavy use have resulted in global bioaccumulation and contamination of the environment, including water sources. Here, we introduce the most common halogenated organic water pollutants, their classification by type of halogen (fluorine, chlorine, or bromine), important policies and regulations, main applications, and environmental and human health risks. Remediation techniques are outlined with particular emphasis on carbon-halogen bond strengths. Aqueous advanced redox processes are discussed, highlighting mechanistic details, including electrochemical oxidations and reductions of the water-oxygen system, and thermodynamic potentials, protonation states, and lifetimes of radicals and reactive oxygen species in aqueous electrolytes at different pH conditions. The state of the art of aqueous advanced redox processes for brominated, chlorinated, and fluorinated organic compounds is presented, along with reported mechanisms for aqueous destruction of select PFAS (per- and polyfluoroalkyl substances). Future research directions for aqueous electrocatalytic destruction of organohalogens are identified, emphasizing the crucial need for developing a quantitative mechanistic understanding of degradation pathways, the improvement of analytical detection methods for organohalogens and transient species during advanced redox processes, and the development of new catalysts and processes that are globally scalable.

Kinetics of photocatalytic degradation of organic compounds: a mini-review and new approach

Organic compounds are widespread pollutants in wastewater, causing significant risks for living organisms. In terms of advanced oxidation processes, photocatalysis is known as an effective technology for the oxidation and mineralization of numerous non-biodegradable organic contaminants. The underlying mechanisms of photocatalytic degradation can be explored through kinetic studies. In previous works, Langmuir-Hinshelwood and pseudo-first-order models were commonly applied to fit batch-mode experimental data, revealing critical kinetic parameters. However, the application or combination conditions of these models were inconsistent or ignored. This paper briefly reviews kinetic models and various factors influencing the kinetics of photocatalytic degradation. In this review, kinetic models are also systemized by a new approach to establish a general concept of a kinetic model for the photocatalytic degradation of organic compounds in an aqueous solution.

The Effect of the Stress Induced by Hydrogen Peroxide and Corticosterone on Tryptophan Metabolism, Using Human Neuroblastoma Cell Line (SH-SY5Y)

L-tryptophan (L-Trp) is an important amino acid in several physiological mechanisms, being metabolized into two important pathways: the kynurenine and the serotonin (5-HT) pathways. It is important in processes such as mood and stress response, the 5-HT pathway begins with the conversion of L-Trp to 5-hydroxytryptophan (5-HTP), that is metabolized into 5-HT, converted to melatonin or to 5-hydroxyindoleacetic acid (5-HIAA). Disturbances in this pathway are reported to be connected with oxidative stress and glucocorticoid-induced stress, are important to explore. Thus, our study aimed to understand the role of hydrogen peroxide (H₂O₂) and corticosterone (CORT)-induced stress on the serotonergic pathway of L-Trp metabolism, and on SH-SY5Y cells, focusing on the study of L-Trp, 5-HTP, 5-HT, and 5-HIAA in combination with H₂O₂ or CORT. We evaluated the effect of these combinations on cellular viability, morphology, and on the extracellular levels of the metabolites. The data obtained highlighted the different ways that stress induction led to different extracellular medium concentration of the studied metabolites. These distinct chemical transformations did not lead to differences in cell morphology/viability. Additionally, serotonin may be the most sensitive metabolite to the exposure to the different stress inducers, being more promissory to study conditions associated with cellular stress.

Light-independent anaerobic microbial oxidation of manganese driven by an electrosyntrophic coculture

Anaerobic microbial manganese oxidation (AMMO) has been considered an ancient biological metabolism for Mn element cycling on Archaean Earth before the presence of oxygen. A light-dependent AMMO was recently observed under strictly anoxic conditions, providing a new proxy for the interpretation of the evolution of oxygenic photosynthesis. However, the feasibility of biotic Mn(II) oxidation in dark geological habitats that must have been abundant remains unknown. Therefore, we discovered that it would be possible to achieve AMMO in a light-independent electrosyntrophic coculture between Rhodopseudomonas palustris and Geobacter metallireducens. Transmission electron microscopy analysis revealed insoluble particle formation in the coculture with Mn(II) addition. X-ray diffraction and X-ray photoelectron spectroscopy analysis verified that these particles were a mixture of MnO2 and Mn3O4. The absence of Mn oxides in either of the monocultures indicated that the Mn(II)-oxidizing activity was induced via electrosyntrophic interactions. Radical quenching and isotopic experiments demonstrated that hydroxyl radicals (•OH) produced from H2O dissociation by R. palustris in the coculture contributed to Mn(II) oxidation. All these findings suggest a new, symbiosis-dependent and light-independent AMMO route, with potential importance to the evolution of oxygenic photosynthesis and the biogeochemical cycling of manganese on Archaean and modern Earth.

Starch-Stabilized Iron Oxide Nanoparticles for the Photocatalytic Degradation of Methylene Blue

The photocatalytic Fenton process, which produces a strong oxidant in the form of hydroxyl radicals, is a useful method to degrade organic contaminants in water. The Fenton reaction uses hydrogen peroxide and Fe2+ ions under relatively acidic conditions (typically pH 2–3) to maintain solubility of the iron catalyst but is troublesome due to the large volumes of decontaminated yet highly acidic water generated. Starch-stabilized iron (Fe2+/Fe3+) oxide nanoparticles were synthesized to serve as a colloidal catalyst system as the hydrophilic starch effectively prevents precipitation of the nanoparticles under conditions closer to neutrality. To evaluate the usefulness of this catalyst system for the photo-Fenton degradation of methylene blue as a model dye, the preparation protocol used and the iron loading in the starch were varied. The photocatalytic Fenton reaction was investigated at pH values up to 4. Not only were the starch-stabilized catalysts able to decolorize the dye but also to mineralize it in part, that is, to degrade it to carbon dioxide and water. The catalysts could be reused in several degradation cycles. This demonstrates that starch is an efficient stabilizer for iron oxide nanoparticles in aqueous media, enabling their use as environmentally friendly and cost-effective photo-Fenton catalysts. These starch-stabilized iron nanoparticles may also be useful to degrade other dyes and pollutants in water, such as pesticides.

Photo-assisted reductive cleavage and catalytic hydrolysis-mediated persulfate activation by mixed redox-couple-involved CuFeS2 for efficient trichloroethylene oxidation in groundwater

Persulfate (PS, S₂O₈^2-) activation through transition metal sulfides (TMS) has gained increasing attention since it can decompose a wide variety of refractory halogenated organic compounds in groundwater and wastewater. However, the processes of PS activation by TMS and particularly the formation of •OH radical under anoxic and acidic conditions (pH ∼2.8) remain elusive. Herein, by employing mixed redox-couple-involved chalcopyrite (CuFeS₂) (150 mg/L) nanoparticles for PS (3.0 mM) activation, 96% of trichloroethylene was degraded within 120 min at pH 6.8 under visible light irradiation. The combination of experimental studies and theoretical calculations suggested that the Cu(I)/Fe(III) mixed redox-couple in CuFeS₂ plays a crucial role to activate PS. Cu(I) acted as an electron donor to transfer electron to Fe(III), then Fe(III) served as an electron transfer bridge as well as a catalytic center to further donate this received electron to the O-O bond of PS, thus yielding SO₄^•- for trichloroethylene oxidation. Moreover, for the first time, •OH radicals were found to form from the catalytic hydrolysis of PS onto CuFeS₂ surface, where S₂O₈^2- anion was hydrolyzed to yield H₂O₂ and these ensuing H₂O₂ were further transformed into •OH radicals via photoelectron-assisted O-O bond cleavage step. Our findings offer valuable insights for understanding the mechanisms of PS activation by redox-couple- involved TMS, which could promote the design of effective activators toward PS decomposition for environmental remediation.

Construction of S-scheme CdS/g-C3N4 nanocomposite with improved visible-light photocatalytic degradation of methylene blue

Within moderate band gap, g-C₃N₄ and CdS are both promising visible light driven photocatalysts. However, their intrinsic high recombination rate of photo-induced electron-hole pairs along with the poor susceptibility in photocorrosion of CdS is main limitations hindering their practical application. In this study, the CdS/g-C₃N₄ composites with various weight ratios of CdS to g-C₃N₄ were solvothermal prepared from the dispersion of components, g-C₃N₄ and CdS, in ethanol. The physicochemical characterizations demonstrate the success in the fabrication of well-dispersed CdS nanoparticles in the g-C₃N₄ matrix. The enhanced photocatalytic activity of the g-C₃N₄/CdS composite over the degradation of methylene blue under visible light was ascribed to the effective photo-induced electron-hole separation via the step scheme (S-scheme) pathway in which the main contribution of high oxidative hydroxyl radicals (^•OH) was demonstrated. Furthermore, via S-scheme model, we also clarify the depletion of photo-induced holes on CdS which is ascribed as the reason for improvement in resistance to photocorrosion of composites.

Removal of organotin compounds and metals from Swedish marine sediment using Fenton's reagent and electrochemical treatment

Metal and tributyltin (TBT) contaminated sediments are problematic for sediment managers and the environment. This study is the first to compare Fenton's reagent and electrochemical treatment as remediation methods for the removal of TBT and metals using laboratory-scale experiments on contaminated dredged sediment. The costs and the applicability of the developed methods were also compared and discussed. Both methods removed > 98% TBT from TBT-spiked sediment samples, while Fenton's reagent removed 64% of the TBT and electrolysis 58% of the TBT from non-spiked samples. TBT in water phase was effectively degraded in both experiments on spiked water and in leachates during the treatment of the sediment. Positive correlations were observed between TBT removal and the added amount of hydrogen peroxide and current density. Both methods removed metals from the sediment, but Fenton's reagent was identified as the most potent option for effective removal of both metals and TBT, especially from highly metal-contaminated sediment. However, due to risks associated with the required chemicals and low pH level in the sediment residue following the Fenton treatment, electrochemical treatment could be a more sustainable option for treating larger quantities of contaminated sediment.

Multifunctional ZnO nanoparticles bio-fabricated from Canna indica L. flowers for seed germination, adsorption, and photocatalytic degradation of organic dyes

The potential of green nanomaterials for environmental and agricultural fields is emerging due to their biocompatible, eco-friendly, and cost-effective performance. We report the use of Canna indica flowers extract as new capping and stabilizing source to bio-fabricate ZnO nanoparticles (ZnO NPs for dyes removal, seed germination. ZnO NPs was biosynthesized by ultrasound-assisted alkaline-free route to reach the critical green strategy. The physicochemical findings of ZnO revealed small crystallite size (27.82 nm), sufficient band-gap energy (3.08 eV), and diverse functional groups. Minimum‑run resolution IV approach found the most pivotal factors influencing on removal of Coomassie Brilliant Blue G-250. Uptake studies pointed out that pseudo second-order, and Langmuir were the best fitted models. Dye molecules behaved monolayer adsorption on ZnO surface layers, and controlled by chemisorption. Natural solar light was used as effective source for photocatalytic degradation of methylene blue (94.23% of removal and 31.09 mg/g of uptake capacity). Compared with H₂O and ZnSO₄, ZnO NPs positively affected the growth of shoot and root lengths (10.2-27.8%) of bean seedlings in most cases. ZnO acts an agrochemical for boosting weight gain, and germination ratio. This study may be promising for developing the recyclable, multifunctional ZnO nanoparticles for environmental and agricultural applications.

Galvano-Fenton Engineering Solution with Spontaneous Catalyst's Generation from Waste: Experimental Efficiency, Parametric Analysis and Modeling Interpretation Applied to a Clean Technology for Dyes Degradation in Water

In this paper, the degradation of the diazo dye naphthol blue black (NBB) using the Galvano-Fenton process is studied experimentally and numerically. The simulations are carried out based on the anodic, cathodic, and 34 elementary reactions evolving in the electrolyte, in addition to the oxidative attack of NBB by HO• at a constant rate of 3.35×107 mol-1·m3·s-1 during the initiation stage of the chain reactions. The selection of the operating conditions including the pH of the electrolyte, the stirring speed, and the electrodes disposition is performed by assessing the kinetics of NBB degradation; these parameters are set to 3, 350 rpm and a parallel disposition with a 3 cm inter-electrode distance, respectively. The kinetics of Fe(III) in the electrolyte were monitored using the principles of Fricke dosimetry and simulated numerically. The model showed more than a 96% correlation with the experimental results in both the blank test and the presence of the dye. The effects of H2O2 and NBB concentrations on the degradation of the dye were examined jointly with the evolution of the simulated H2O2, Fe2+, and HO• concentrations in the electrolyte. The model demonstrated a good correlation with the experimental results in terms of the initial degradation rates, with correlation coefficients exceeding 98%.

Detection of Oxidative Stress Induced by Nanomaterials in Cells-The Roles of Reactive Oxygen Species and Glutathione

The potential of nanomaterials use is huge, especially in fields such as medicine or industry. Due to widespread use of nanomaterials, their cytotoxicity and involvement in cellular pathways ought to be evaluated in detail. Nanomaterials can induce the production of a number of substances in cells, including reactive oxygen species (ROS), participating in physiological and pathological cellular processes. These highly reactive substances include: superoxide, singlet oxygen, hydroxyl radical, and hydrogen peroxide. For overall assessment, there are a number of fluorescent probes in particular that are very specific and selective for given ROS. In addition, due to the involvement of ROS in a number of cellular signaling pathways, understanding the principle of ROS production induced by nanomaterials is very important. For defense, the cells have a number of reparative and especially antioxidant mechanisms. One of the most potent antioxidants is a tripeptide glutathione. Thus, the glutathione depletion can be a characteristic manifestation of harmful effects caused by the prooxidative-acting of nanomaterials in cells. For these reasons, here we would like to provide a review on the current knowledge of ROS-mediated cellular nanotoxicity manifesting as glutathione depletion, including an overview of approaches for the detection of ROS levels in cells.

Ashwathanarayanaiah B, Kulkarni S, Udayakishore Y, Halyal A, Chavan A. Intensification of advanced oxidation processes (AOPs) for the degradation of bisphenol-A

Bisphenol-A (BPA), a precursor for many polymers, is a harmful compound for living organisms if present beyond permissible limits in aqueous streams. The combinations of oxidation processes like Hydrodynamic Cavitation (HC), hydrogen peroxide (H2O2), and Fenton’s reagent (H2O2 + FeSO4) were examined for the degradation of BPA in the present study. The effects of operating parameters like inlet pressure, initial concentration of BPA, orifice geometry were investigated on BPA degradation. The degradation rates of BPA increased with inlet pressure up to 0.5 MPa and then showed a decreasing trend beyond 0.5 MPa. The initial concentration of BPA had an inverse relation with the degradation percentage. The multiple hole orifice plate showed better degradation of BPA compared to the single hole orifice plate. In the intensification studies, the addition of hydrogen peroxide to BPA in the cavitation reactor favored BPA degradation. A combination of HC + Fenton’s reagent (0.1 M H2O2 + 0.01 M FeSO4) significantly degraded BPA present in the aqueous streams.

Electrochemical Disinfection in Water and Wastewater Treatment: Identifying Impacts of Water Quality and Operating Conditions on Performance

Electrochemical disinfection-a method in which chemical oxidants are generated in situ via redox reactions on the surface of an electrode-has attracted increased attention in recent years as an alternative to traditional chemical dosing disinfection methods. Because electrochemical disinfection does not entail the transport and storage of hazardous materials and can be scaled across centralized and distributed treatment contexts, it shows promise for use both in resource limited settings and as a supplement for aging centralized systems. In this Critical Review, we explore the significance of treatment context, oxidant selection, and operating practice on electrochemical disinfection system performance. We analyze the impacts of water composition on oxidant demand and required disinfectant dose across drinking water, centralized wastewater, and distributed wastewater treatment contexts for both free chlorine- and hydroxyl-radical-based systems. Drivers of energy consumption during oxidant generation are identified, and the energetic performance of experimentally reported electrochemical disinfection systems are evaluated against optimal modeled performance. We also highlight promising applications and operational strategies for electrochemical disinfection and propose reporting standards for future work.

Spraying Small Water Droplets Acts as a Bacteriocide

Disinfectants are important for arresting the spread of pathogens in the environment. Frequently used disinfectants are often incompatible with certain surfaces, expensive and can produce hazardous by-products. We report that micron-sized water droplets can act as an effective disinfectant, which were formed by spraying pure bulk water with coaxial nebulizing airflow. Spraying for 20 min onto Escherichia coli and Salmonella typhimurium on stainless-steel discs caused inactivation of over 98% of the bacteria. Control experiments resulted in less than 10% inactivation (water stream only and gas only) and 55% inactivation with 3% hydrogen peroxide. Experiments have shown that cell death results from cell wall destruction. We suggest that the combined action of reactive oxygen species present in water droplets (but not in bulk water) along with the droplet surface charge is responsible for the observed bactericidal activity.

Synthesis of panos extract mediated ZnO nano-flowers as photocatalyst for industrial dye degradation by UV illumination

Green synthesis of zinc oxide has gained extensive attention as a reliable, sustainable, and eco-friendly protocol to reduce the destructive effects associated with the traditional synthesis methods commonly utilized in laboratory and industry. Here for the first time, we have synthesized quaker ladies flower type ZnO (ZnO/QNF) from panos extract (extract from four panax plants such as Panax ginseng, Acanthopanax senticosus, Kalopanax septemlobus and Dendropanax morbifera). The synthesized ZnO materials was characterized using powder X-ray diffraction, Fourier infrared spectroscopy, X-ray photoelectron spectroscopy and Transmission electron microscope. The newly synthesized ZnO/QNF was applied for the removal of industrial dyes such as methylene blue (MB), Eosin Y (EY) and Malachite green (MG) under UV illumination. The photocatalyst degraded the 15 mg L^-1 MB, EY and MG to >99% within 80, 90 and 110 min of contact time, respectively. In addition, the ZnO/QNF photocatalyst removed the low concentrated 5 mg L^-1 of MB, EY, and MG within 30, 35 and 40 min of contact time, respectively. The pedal structure provided all the active sites available for the easy interaction with dye molecule under UV, and that enabled fast kinetics of dye degradation than the many other benchmark materials reported previously. The ZnO photocatalyst could be reused minimum of five cycles without any significant loss in degradation efficiency.