Proton transfer in hydrogen-bonded degenerate systems of water and ammonia in metal-organic frameworks

High-Performance Proton Field-Effect Transistor Based on Two-Dimensional Cd Vacancy-Resided Cd0.85PS3Li0.15H0.15

Ion transport is a critical phenomenon underpinning numerous biological, physical, and chemical systems. Proton transistors leveraging proton transport face significant limitations, such as a low on-off ratio and deficient carrier mobility, which restrict their applicability in biological and other scenarios. This study explores the use of two-dimensional (2D) vacancy-residing transition metal phosphorus trichallcogenide-based membranes as the active layer for proton field-effect transistors. The synthesized Cd0.85PS3Li0.15H0.15 membrane exhibits a well-organized layered structure and high hydrophilicity, with nanometer-sized interlayers containing interconnected water networks. These distinct features facilitate proton conduction, leading to a high proton conductivity value of 0.83 S cm-1 at 98% relative humidity and 90 °C, with an activation energy of 0.26 eV. The Cd0.85PS3Li0.15H0.15-based proton transistor demonstrates tunability via gate voltage, thereby enabling effective modulation of proton flow across source and drain electrodes. The transistor notably showcases superior switching characteristics, with an on/off ratio surpassing 5.51 and a carrier mobility of 8.84 × 10-2 cm2 V-1 s-1. The underlying mechanism for this performance enhancement is attributed to electric-field-induced switching in Cd vacancies. This research boosts the development of highly versatile ionotropic devices by introducing advanced 2D ion-conductive membranes.

Unveiling Negative Differential Resistance and Superionic Conductivity: Water Anchored on Layered Materials

Unravelling the perplexing nature of negative differential resistance (NDR) in 2D transition metal dichalcogenide (2D TMD) devices, especially regarding intrinsic properties, is hindered by experiments conducted in ambient environments. A thorough investigation is essential for unveiling the actual mechanism. In this study, we provide compelling evidence of the NDR effect with a remarkably high peak-to-valley current ratio and proton-diffused superionic conductivity in quantum-confined water molecules anchored to a thin film of 2D TMDs. Our investigation underscores the crucial role of ambient moisture for this robust NDR effect independent of underlying materials used. The bonding of water molecules to the existing sulfur defect sites on 2D TMD nanoflakes facilitates the formation of bridges between two planar metal electrodes, thus enabling superionic in-plane protonic conduction. During electrolysis of chemisorbed water, protons are liberated at the anode and migrate toward the cathode during bias voltage sweeping. Nevertheless, proton diffusion encounters increasing impedance beyond a certain applied bias, thereby restricting current flow even with higher biasing voltages, which is attributed to the interfacial Schottky energy barrier influenced by the Fermi level pinning effect. Our DFT simulations corroborate this mechanism, revealing minimal intermolecular interaction of H+ ions compared to OH- ions at distinct atomic sites on 2D TMD nanoflakes.

A Palladium-Containing Polyoxotungstate with Anisotropic Proton Conductivity

Here, a case of bilayer heterojunction Pd-containing polyoxotungstate (POW), connecting a Te3Pd3 ring and an Anderson-like TeW6 cluster, has been synthesized. The Anderson-like cluster is the first example in POW. The coordination of Pd in the ring with the S atom on the sulfo group breaks the traditional coordination configuration of Pd and O in polyoxometalates (POMs), enriching the structural types of Pd-containing POMs. In addition, the hybrid bilayer heterojunction structure at the molecular level not only provides high thermal stability but also results in spatial arrangement anisotropy, leading to up to five times the anisotropic proton conductivity.

A Highly Stable Multifunctional Bi-Based MOF for Rapid Visual Detection of S2- and H2S Gas with High Proton Conductivity

Metal organic frameworks (MOFs) constructed with bismuth metal have not been widely reported, especially multifunctional Bi-MOFs. Therefore, developing multifunctional MOFs is of great significance due to the increasing requirements of materials. In this work, a 3D Bi-MOF (Bi-TCPE) with multifunctionality was successfully constructed, demonstrating high thermal stability, water stability, a porous structure, and strong blue fluorescence emission. We evaluated the properties of Bi-TCPE in detecting anions (S2-, Cr2O72-, and CrO42-) in aqueous solution, along with the rapid visual detection of H2S gas and proton conduction. In terms of anion detection, Bi-TCPE achieved the rapid detection of trace S2- in aqueous solutions, while the Ksv value was 1.224 × 104 M-1 with a limit of detection (LOD) value of 1.93 μM through titration experiments. Furthermore, Bi-TCPE could sensitively detect Cr2O72- and CrO42-, with Ksv values of 1.144 × 104 and 1.066 × 104 M-1, respectively, while LOD reached 2.07 and 2.18 μM. Subsequently, we conducted H2S gas detection experiments, and the results indicated that Bi-TCPE could selectively detect H2S gas at extremely low concentrations (2.08 ppm) and with a fast response time (<10 s). We also observed significant color changes under both UV light and sunlight. Therefore, we developed a H2S detection test paper for the rapid visual detection of H2S gas. Finally, we evaluated the proton conductivity of Bi-TCPE, and the experimental results showed that the proton conductivity of Bi-TCPE reached 4.77 × 10-2 S·cm-1 at 98% RH and 90 °C, achieving an excellent value for unmodified and encapsulated MOFs. In addition, Bi-TCPE showed high stability in proton conduction experiments (it remained stable after 21 consecutive days of testing and 12 cycles of testing), demonstrating relatively high application value. These results indicate that Bi-TCPE is a multifunctional MOF material with great application potential.

Effect of polymerization on free water in polyacrylamide hydrogels observed with Brillouin spectroscopy

Brillouin spectroscopy is used to determine the effects of polymer concentration, crosslinking density, and polymerization on the longitudinal storage and loss moduli of polyacrylamide hydrogels. The model established by Chiarelli et al. is implemented to calculate the speed of sound in the free water [Chiarelli et al., The Journal of the Acoustical Society of America, 2010, 127(3), 1197-1207]. The polymer concentration has the greatest effect on the moduli of the polymer matrix. We determined that the crosslink density has no measurable effect on the logitudinal storage or loss modulus of polyacrylamide hydrogels when measurements are made at GHz frequencies, in contrast to measurements made at kHz frequencies as documented by other studies. However, the moduli are independent of monomer concentration if the acrylamide is not polymerized. We show at the GHz frequency that the incorporation of acrylamide polymer chains affects the mechanical properties of the free water. The speed of sound in the free water is reduced by the introduction of polymerized acrylamide. The long polymer chains and their interactions with the bounded water disrupt the bonding organization of the unbound water, causing a reduction of the average hydrogen bond strength between free water molecules. This results in a decreased speed of sound in the free water and an increase in the longitudinal storage modulus of the hydrogel.

Hydrogen-Bonded Metal-Organic Framework Nanosheet as a Proton Conducting Membrane for an H2/O2 Fuel Cell

Proton-conducting metal-organic frameworks (MOFs) have attracted attention as potential electrolytes for fuel cells. However, research progress in utilizing MOFs as electrolytes for fuel cells has been limited, mainly due to challenges associated with issues such as the fabrication of MOF membranes, and hydrogen crossover through the MOF's pores. Here, proton conductivity and fuel cell performance of a self-standing membrane prepared from of a bismuth subgallate MOF nanosheets with non-porous structure are reported. The fabricated MOF nanosheet membrane with no binding agent exhibits structural anisotropy. The proton conductivity in the membrane thickness direction (4.4 × 10-3 S cm-1) at 90 °C and RH 100% is observed to be higher than that in the in-plane direction of the membrane (3.3 × 10-5 S cm-1). The open circuit voltage (OCV) of a fuel cell with ≈120 µm proton conducting membrane is 1.0 V. The non-porous nature of the MOF nanosheets contributes to the relatively high OCV. A fuel cell using ≈40 µm membrane as proton conducting electrolyte records a maximum of 25 mW cm-2 power density and a maximum of 109 mA cm-2 current density with 0.91 V OCV at 80 °C in humid conditions.

Local hydrogen bonding environment induces the deprotonation of surface hydroxyl for continuing ammonia decomposition

There is still a paucity of fundamental understanding about the reaction of ammonia decomposition over TiO2, especially the role of water. Herein, FPMD and DFT calculations were used to address this concern. The results reveal that ammonia decomposition in pure ammonia causes the hydroxylation of the surfaces and reduction of the proton acceptor sites, making proton transfer (PT) difficult, increasing the distances between the NH3 and Obr sites and changing the adsorption configurations of NH3, which are not favourable for accepting protons from NH3 dissociation. When water is introduced, the local hydrogen bonding environment, consisting of NH3 and H2O with the H2O dynamically close to the ObrH, promotes the increase of the positive charge of H atoms from 0.133 to 1.47 e, which increases the ObrH bond dipole moment from 1.136 to 1.400 Debye, resulting in the shortening of the H-bond distances between NH3 and ObrH (1.858 vs. 1.945 Å of only NH3) and enlarging the ObrH bonds (0.980 vs. 1.120 Å). This reduces the activation energy barriers of ObrH deprotonation and causes the surfaces to have low hydroxyl coverage from 0.425 to 0.382 eV. Our study reveals the role of water and provides new insights into ammonia decomposition on TiO2.

A homochiral tartrate-bridged dinuclear chromium(III) complex anion with a resonance-assisted hydrogen bond for proton conduction

The synthesis of a homochiral building block based on L-tartrate-chromium(III) complex anions is reported. The dinuclear complex anion, which contains two bridging L-tartrate ligands and one aromatic N-donor ligand coordinated to chromium(III) ions, exhibits a boat conformation in which intramolecular resonance-assisted hydrogen bonding is present. The sodium L-tartrate-chromium(III) compound with the formula Na[Cr2(bpy)2(L-tart)2H]·9H2O (1) crystallizes from a methanol-water solution as a high water content material in the monoclinic space group P2. The as-synthesized compound is only stable at high relative humidity and undergoes structural transformations during drying, which are accompanied by water loss. However, these transformations are reversible and upon wetting, the material returns to its high water content structure. Based on a combination of experimental techniques (PXRD, in situ ATR-FTIR and EPR spectroscopy), the structure of the complex anions appears to be insensitive to the humidity variable processes (wetting and drying). Due to the presence of several hydrogen acceptor and donor groups in the L-tartrate-chromium(III) complex anion, we investigated the proton transport properties of a sodium L-tartrate-chromium(III) compound by impedance spectroscopy under dry and wet conditions at different temperatures. Since the relative humidity affects the structural transformations in this system, it also has a large influence on the proton conductivity, which varies by up to four orders of magnitude depending on the degree of hydration. These results confirm that the proton conductivity can be tuned in flexible structures in which non-covalent interactions determine the crystal packing.

Room-Temperature Superprotonic Conductivity beyond 10-1 S cm-1 in a Co(II) Coordination Polymer

An efficient design of crystalline solid-state proton conductors (SSPCs) is crucial for the progress of clean energy applications. Developing such materials to make them work at room temperature with a conductivity of ≥10-1 S cm-1 is of significant interest in terms of technical and commercial aspects. Utilizing the recently highlighted "coordinated-water-driven proton conduction" approach, herein, we have rationally synthesized two highly stable and scalable 1D Co(II) coordination polymers (CPs) as SSPCs, PCM-2 {[Co(bpy)(H2O)2(NO3)2]·H2O}n and PCM-3 {[Co2(bpy)2(SO4)2(H2O)6].4H2O}n, with distinct alignments in coordinated water and coordinated oxo-anions (nitrate and sulfate, respectively). The acidity of the metal-bound water molecules in PCM-2 is further enhanced through cooperative long-range continuous H bonds with coordinated Brønsted basic nitrates (proton acceptors), leading to ultrahigh superprotonic conductivities even at 25 °C (1.03 × 10-1 S cm-1 under 95% RH), and reached a maximum of 2.99 × 10-1 S cm-1 at 85 °C (95% RH). The conductivity at 25 °C is even higher than that of commercial Nafion 117 (6.74 × 10-2 S cm-1 at 100% RH). The absence of such an H-bonding interaction in PCM-3 (closed loops) resulted in a lesser conductivity of 5.87 × 10-5 S cm-1 (95% RH, 85 °C). PCM-2 represents the first example of SSPC exhibiting conductivity in the order 10-1 S cm-1 at ambient temperature (25 °C) with excellent recyclability.

Imparting Stable and Ultrahigh Proton Conductivity to a Layered Rare Earth Hydroxide via Ion Exchange

Proton conductors are essential functional materials with a wide variety of potential applications in energy storage and conversion. In order to address the issues of low proton conductivity and poor stability in conventional proton conductors, a simple and valid ion-exchange method was proposed in this study for the introduction of stable and ultrahigh proton conductivity in layered rare earth hydroxides (LRHs). Test analyses by solid-state nuclear magnetic resonance, Fourier transform infrared spectroscopy, and powder X-ray diffraction revealed that the exchange of H2PO4- not only does not disrupt the layered structure of LRHs, but also creates more active proton sites and channels necessary for proton transport, thereby creating a high-performance proton conductor (LRH-H2PO4-). By utilizing this ion-exchange method, the proton conductivity of LRHs can be significantly enhanced from a low level to an ultrahigh level (>10-2 S·cm-1), while maintaining excellent long-term stability. Moreover, through methodically manipulating the guest ions and molecules housed within the interlayers of LRHs, a comprehensive explanation has been presented regarding the proficient mechanism of proton conduction in LRH-H2PO4-. As a result, this investigation presents a feasible and available approach for advancing proton conductor.

Four Lanthanide(III) Metal-Organic Frameworks Fabricated by Bithiophene Dicarboxylate for High Inherent Proton Conduction

Currently, it is still a challenge to directly achieve highly stable metal-organic frameworks (MOFs) with superior proton conductivity solely through the exquisite design of ligands and the attentive selection of metal nodes. Inspired by this, we are intrigued by a multifunctional dicarboxylate ligand including dithiophene groups, 3,4-dimethylthieno[2,3-b]thiophene-2,5-dicarboxylic acid (H2DTD), and lanthanide ions with distinct coordination topologies. Successfully, four isostructural three-dimensional lanthanide(III)-based MOFs, [Ln2(DTD)3(DEF)4]·DEF·6H2O [LnIII = TbIII (Tb-MOF), EuIII (Eu-MOF), SmIII (Sm-MOF), and DyIII (Dy-MOF)], were solvothermally prepared, in which the effective proton transport will be provided by the coordinated or free solvent molecules, the crystalline water molecules, and the framework components, as well as a large number of highly electronegative S and O atoms. As expected, the four Ln-MOFs demonstrated the highest proton conductivities (σ) being 0.54 × 10-3, 3.75 × 10-3, 1.28 × 10-3, and 1.92 × 10-3 S·cm-1 for the four MOFs, respectively, at 100 °C/98% relative humidity (RH). Excitingly, Dy-MOF demonstrated an extraordinary ultrahigh σ of 1 × 10-3 S·cm-1 at 30 °C/98% RH. Additionally, the plausible proton transport mechanisms were emphasized.

Comparative Analysis of Proton Conductivity in Two Zn-Based MOFs Featuring Sulfate and Sulfonate Functional Groups

Metal-organic frameworks (MOFs) have shown promising potential as proton-conducting materials due to their tunable structures and high porosity. In this study, two novel MOFs had been successfully synthesized, one containing sulfate groups (MOF-1; [Zn4(TIPE)2(SO4)4(H2O)]·5H2O) and the other containing sulfonate groups (MOF-2; [Zn2(TIPE)(5-sip)(NO3)0.66]·0.34NO3·17.5H2O) (TIPE = 1,1,2,2-tetrakis(4-(1H-imidazole-1-yl)phenyl)ethene, H35-sip = 5-sulfoisophthalicacid), and the effect of the two groups on the proton conductivity of Zn-based MOFs had been investigated and compared for the first time. The proton conductivity of these MOFs was systematically measured at different temperatures and humidity conditions. Remarkably, the results revealed significant differences in proton conductivity between the two sets of MOFs. At 90 °C and 98% RH, MOF-1 and MOF-2 achieved optimal proton conductivity of 4.48 × 10-3 and 5.69 × 10-2 S·cm-1, respectively. This was due to the structural differences arising from the presence of different functional groups, which subsequently affected the porosity and hydrophilicity, thereby influencing the proton conductivity. Overall, this comparative study revealed the influence of sulfate and sulfonate groups on the proton conductivity of Zn-based MOFs. This research provided a feasible idea for the development of advanced MOF materials with enhanced proton conductivity and opened up new possibilities for their application in proton devices.

Transition from vehicle to Grotthuss proton transfer in a nanosized flask: cryogenic ion spectroscopy of protonated p-aminobenzoic acid solvated with D2O

Proton transfer (PT) is one of the most ubiquitous reactions in chemistry and life science. The unique nature of PT has been rationalized not by the transport of a solvated proton (vehicle mechanism) but by the Grotthuss mechanism in which a proton is transported to the nearest proton acceptor along a hydrogen-bonded network. However, clear experimental evidence of the Grotthuss mechanism has not been reported yet. Herein we show by infrared spectroscopy that a vehicle-type PT occurs in the penta- and hexahydrated clusters of protonated p-aminobenzoic acid, while Grotthuss-type PT is observed in heptahydrated clusters, indicating a change in the PT mechanism depending on the degree of hydration. These findings emphasize the importance of the usually ignored vehicle mechanism as well as the degree of hydration. It highlights the possibility of controlling the PT mechanism by the number of water molecules in chemical and biological environments.

Superprotonic Conductivity in a Metalloporphyrin-Based SMOF (Supramolecular Metal-Organic Framework)

Metal-organic frameworks and supramolecular metal-organic frameworks (SMOFs) exhibit great potential for a broad range of applications taking advantage of the high surface area and pore sizes and tunable chemistry. In particular, metalloporphyrin-based MOFs and SMOFs are becoming of great importance in many fields due to the bioessential functions of these macrocycles that are being mimicked. On the other hand, during the last years, proton-conducting materials have aroused much interest, and those presenting high conductivity values are potential candidates to play a key role in some solid-state electrochemical devices such as batteries and fuel cells. In this way, using metalloporphyrins as building units we have obtained a new crystalline material with formula [H(bipy)]2[(MnTPPS)(H2O)2]·2bipy·14H2O, where bipy is 4,4'-bipyidine and TPPS4- is the meso-tetra(4-sulfonatephenyl) porphyrin. The crystal structure shows a zig-zag water chain along the [100] direction located between the sulfonate groups of the porphyrin. Taking into account those structural features, the compound was tested for proton conduction by complex electrochemical impedance spectroscopy (EIS). The as-obtained conductivity is 1 × 10-2 S·cm-1 at 40 °C and 98% relative humidity, which is a remarkably high value.

Mixed-valence compounds based on heterometallic-oxo-clusters containing Sb(III,V): crystal structures and proton conduction

Two isostructural Co(Cd)-antimony-oxo tartrate cluster-based compounds with a one-dimensional (1-D) belt-like structure, namely H9.2[Co(H2O)6]{M0.5(H2O)3.5{M'(H2O)4[SbVO6[Co4.2(H2O)5SbIII6(μ3-O)2(tta)6]]}}2·nH2O (M = Co, M' = Co, n = 9 (1); M = Cd0.39/Co0.61, M' = Cd0.24/Co0.76, n = 7 (2); H4tta = tartaric acid), have been synthesized by solvothermal methods. It is noteworthy that the relatively rare mixed-valence Sb(III,V) exists in the structures. The anionic clusters in both compounds appear to be in a sandwich configuration; the top and bottom layers are based on {Sb3(μ3-O)(tta)3} brackets, and the intermediate layer is occupied by {SbVO6[Co4.2(H2O)5]}. The title compounds have been characterized by single-crystal X-ray diffraction, powder X-ray diffraction, elemental analyses, thermogravimetric analyses, and UV-Vis spectroscopy. We chose compound 2 as a representative to test its proton conductivity, and the results show that the conductivity can reach 1.42 × 10-3 S cm-1 at 85 °C under 98% relative humidity.

Interfacial Water Molecules as Agents for Phase Change Control and Proton Conductivity Enhancement in the Ammonium Vanadyl Tartrate System

This study demonstrates the reversible structural transformation, single-crystal-to-single-crystal, of the ammonium vanadyl (L-tartrate) complex salt from the hydrate phase to the anhydrous phase. The transformation can be initiated by stimuli, such as temperature, humidity, or vacuum conditions. The hydrate and anhydrous phases exhibit a tetragonal structure (P41212), with marked differences in hydrogen bonding due to the presence or absence of one water molecule per asymmetric unit. The intricate relationship between crystal packing and intermolecular interactions in the hydrate phase was investigated by crystallographic charge density analysis revealing, at the molecular level, the reasons for the observed 5 orders of magnitude higher proton conductivity of the hydrate phase compared to that of the anhydrous phase. To gain further insight into the processes occurring at the surfaces of grain boundaries and the proton transfer mechanisms in this system, rehydration of the complex salt was carried out by using D2O instead of H2O and monitored by in situ ATR-FTIR spectroscopy. The results highlight the critical role of interfacial water molecules in driving structural transformations and influencing proton conductivity.

The Tetrel Bonds of Hypervalent Halogen Compounds

The tetrel bond between PhXF2Y(TF3) (T = C and Si; X = Cl, Br, and I; Y = F and Cl) and the electron donor MCN (M = Li and Na) was investigated at the M06-2X/aug-cc-pVDZ level of theory. As the electronegativity of the halogen atom X increases, the strength of the tetrel bond also increases, but as the electronegativity of the halogen atom Y increases, the strength of the tetrel bond decreases. The magnitude of the interaction energy in most -CF3 complexes was found to be less than 10 kcal/mol, but to exceed 11 kcal/mol for PhClF2Cl(CF3)⋯NCNa. The tetrel bond is greatly enhanced when the -SiF3 group interacts with LiCN or NaCN, with the largest interaction energy approaching 100 kcal/mol and displaying a covalent Si⋯N interaction. Along with this enhancement, the Si⋯N distance was found to be less than the X-Si bond length, the -SiF3 group to be closer to the N atom, and in most -SiF3 systems, the X-Si-F angle to be less than 90°; the -SiF3 group therefore undergoes inversion and complete transfer in some systems.

New insights into the proton pumping mechanism of ba3 cytochrome c oxidase: the functions of key residues and water

As the terminal oxidase of cell respiration in mitochondria and aerobic bacteria, the proton pumping mechanism of ba3-type cytochrome c oxidase (CcO) of Thermus thermophiles is still not fully understood. Especially, the functions of key residues which were considered as the possible proton loading sites (PLSs) above the catalytic center, as well as water located above and within the catalytic center, remain unclear. In this work, molecular dynamic simulations were performed on a set of designed mutants of key residues (Asp287, Asp372, His376, and Glu126II). The results showed that Asp287 may not be a PLS, but it could modulate the ability of the proton transfer pathway to transfer protons through its salt bridge with Arg225. Maintaining the closed state of the water pool above the catalytic center is necessary for the participation of inside water molecules in proton transfer. Water molecules inside the water pool can form hydrogen bond chains with PLS to facilitate proton transfer. Additional quantum cluster models of the Fe-Cu metal catalytic center are established, indicating that when the proton is transferred from Tyr237, it is more likely to reach the OCu atom directly through only one water molecule. This work provides a more profound understanding of the functions of important residues and specific water molecules in the proton pumping mechanism of CcO.

Thermally stable proton conductivity from nanodiamond oxide

Herein, we report nanodiamond oxide (NDOx), obtained from modified Hummers' oxidation of nanodiamond (ND), showing excellent proton conductivity and thermal stability. NDOx possesses hydrophilicity resulting in higher water adsorption and the retention of functional groups at elevated temperatures can be attributed to the high proton conductivity and thermal stability, respectively.

High Proton Conductivity of Magnetically Ordered 2D Oxalate-Bridged [MnIICrIII] Coordination Polymers with Irregular Topology

Two heterometallic coordination polymers {[NH(CH₃)₂(C₂H₅)]₈[Mn₄Cl₄Cr₄(C₂O₄)₁₂]}_n (1) and {[NH(CH₃)-(C₂H₅)₂]₈[Mn₄Cl₄Cr₄(C₂O₄)₁₂]}_n (2) were obtained by slow evaporation of an aqueous solution containing the building block [A]₃[Cr(C₂O₄)₃] [A = (CH₃)₂(C₂H₅)NH⁺ or (CH₃)(C₂H₅)₂NH⁺] and MnCl₂·2H₂O. The isostructural compounds comprise irregular two-dimensional (2D) oxalate-bridged anionic layers [Mn₄Cl₄Cr₄(C₂O₄)₁₂]_n^8n- with a Shubnikov plane net fes topology designated as (4·8²), interleaved by the hydrogen-bonded templating cations (CH₃)₂(C₂H₅)NH⁺ (1) or (CH₃)(C₂H₅)₂NH⁺ (2). They exhibit remarkable humidity-sensing properties and very high proton conductivity at room temperature [1.60 × 10^-3 (Ω·cm)^-1 at 90% relative humidity (RH) of 1 and 9.6 × 10^-4 (Ω·cm)^-1 at 94% RH of 2]. The layered structure facilitates the uptake of water molecules, which contributes to the enhancement of proton conductivity at high RH. The better proton transport observed in 1 compared to that in 2 can be tentatively attributed to the higher hydrophilicity of the cations (CH₃)₂(C₂H₅)NH⁺, which is closely related to their affinity for water molecules. The original topology of the anionic networks in both compounds leads to the development of interesting magnetic phases upon cooling. The magnetically ordered ground state can be described as the coupling of ferromagnetic spin chains in which Mn²⁺ and Cr³⁺ ions are bridged by bis(bidentate) oxalate groups into antiferromagnetic planes through monodentate-bidentate oxalate bridges in the layers, which are triggered to long-range order below temperature 4.45 K via weaker interlayer interactions.

Pyrazine-Functionalized Donor-Acceptor Covalent Organic Frameworks for Enhanced Photocatalytic H2 Evolution with High Proton Transport

The well-defined 2D or 3D structure of covalent organic frameworks (COFs) makes it have great potential in photoelectric conversion and ions conduction fields. Herein, a new donor-accepter (D-A) COF material, named PyPz-COF, constructed from electron donor 4,4',4″,4'″-(pyrene-1,3,6,8-tetrayl)tetraaniline and electron accepter 4,4'-(pyrazine-2,5-diyl)dibenzaldehyde with an ordered and stable π-conjugated structure is reported. Interestingly, the introduction of pyrazine ring endows the PyPz-COF a distinct optical, electrochemical, charge-transfer properties, and also brings plentiful CN groups that enrich the proton by hydrogen bonds to enhance the photocatalysis performance. Thus, PyPz-COF exhibits a significantly improved photocatalytic hydrogen generation performance up to 7542 µmol g^-1 h^-1 with Pt as cocatalyst, also in clear contrast to that of PyTp-COF without pyrazine introduction (1714 µmol g^-1 h^-1 ). Moreover, the abundant nitrogen sites of the pyrazine ring and the well-defined 1D nanochannels enable the as-prepared COFs to immobilize H₃ PO₄ proton carriers in COFs through hydrogen bond confinement. The resulting material has an impressive proton conduction up to 8.10 × 10^-2 S cm^-1 at 353 K, 98% RH. This work will inspire the design and synthesis of COF-based materials with both efficient photocatalysis and proton conduction performance in the future.

Quantitative Study of Charge Distribution Variations on Silica-Nafion Composite Membranes under Hydration Using an Approximation Model

Understanding the ionic structure and charge transport on proton exchange membranes (PEMs) is crucial for their characterization and development. Electrostatic force microscopy (EFM) is one of the best tools for studying the ionic structure and charge transport on PEMs. In using EFM to study PEMs, an analytical approximation model is required for the interoperation of the EFM signal. In this study, we quantitatively analyzed recast Nafion and silica-Nafion composite membranes using the derived mathematical approximation model. The study was conducted in several steps. In the first step, the mathematical approximation model was derived using the principles of electromagnetism and EFM and the chemical structure of PEM. In the second step, the phase map and charge distribution map on the PEM were simultaneously derived using atomic force microscopy. In the final step, the charge distribution maps of the membranes were characterized using the model. There are several remarkable results in this study. First, the model was accurately derived as two independent terms. Each term shows the electrostatic force due to the induced charge of the dielectric surface and the free charge on the surface. Second, the local dielectric property and surface charge are numerically calculated on the membranes, and the calculation results are approximately valid compared with those in other studies.

Bi-MOF Modulating MnO2 Deposition Enables Ultra-Stable Cathode-Free Aqueous Zinc-Ion Batteries

The Mn-based materials are considered as the most promising cathodes for zinc-ion batteries (ZIBs) due to their inherent advantages of safety, sustainability and high energy density, however suffer from poor cyclability caused by gradual Mn²⁺ dissolution and irreversible structural transformation. The mainstream solution is pre-adding Mn²⁺ into the electrolyte, nevertheless faces the challenge of irreversible Mn²⁺ consumption results from the MnO₂ electrodeposition reaction (Mn²⁺  → MnO₂ ). This work proposes a "MOFs as the electrodeposition surface" strategy, rather than blocking it. The bismuth (III) pyridine-3,5-dicarboxylate (Bi-PYDC) is selected as the typical electrodeposition surface to regulate the deposition reaction from Mn²⁺ to MnO₂ . Because of the unique less hydrophilic and manganophilic nature of Bi-PYDC for Mn²⁺ , a moderate MnO₂ deposition rate is achieved, preventing the electrolyte from rapidly exhausting Mn²⁺ . Simultaneously, the intrinsic stability of deposited R-MnO₂ is enhanced by the slowly released Bi³⁺ from Bi-PYDC reservoir. Furthermore, Bi-PYDC shows the ability to accommodate H⁺ insertion/extraction. Benefiting from these merits, the cathode-free ZIB using Bi-PYDC as the electrodeposition surface for MnO₂ shows an outstanding cycle lifespan of more than 10 000 cycles at 1 mA cm^-2 . This electrode design may stimulate a new pathway for developing cathode free long-life rechargeable ZIBs.

Bio-Inspired Synthetic Hydrogen-Bonded Organic Frameworks for Efficient Proton Conduction

Hydrogen-bonded organic frameworks (HOFs) are a rising class of promising proton-conducting materials. However, they always suffer from the inherent contradiction between chemical stability and proton conduction. Herein, inspired by the self-assembly of lipid bilayer membranes, a series of aminomethylphosphonic acid-derived single-component HOFs are successfully developed with different substituents attached to the phosphonate oxygen group. They remain highly stable in strong acid or alkaline water solutions for one month owing to the presence of charge-assisted hydrogen bonds. Interestingly, in the absence of external proton carriers, the methyl-substituted phosphonate-based HOF exhibits a very high proton conductivity of up to 4.2 × 10^-3  S cm^-1 under 80 °C and 98% relative humidity. This value is not only comparable to that of HOFs consisting of mixed ligands but also is the highest reported in single-component HOFs. A combination of single-crystal structure analysis and density functional theory calculations reveals that the high conductivity is attributed to the strengthened H-bonding interactions between positively charged amines and negatively charged phosphonate groups in the channel of bio-inspired HOFs. This finding demonstrates that the well-defined molecular structure of proton conductors is of great importance in the precise understanding of the relationship between structure and property.

A Tug of War between the Self- and Cross-associating Hydrogen Bonds in Neutral Ammonia-Water Clusters: Energetic Insights by Molecular Tailoring Approach

In the present work, the energies of various types of individual HBs observed in neutral (NH₃ )_m (H₂ O)_n , (m+n=2 to 7) clusters were estimated using the molecular tailoring approach (MTA)-based method. The calculated individual HB energies suggest that the O-H…N HBs are the strongest (1.21 to 12.49 kcal mol^-1 ). The next ones are the O-H…O (3.97 to 9.30 kcal mol^-1 ) HBs. The strengths of N-H…N (1.09 to 5.29 kcal mol^-1 ) and N-H…O (2.85 to 5.56 kcal mol^-1 ) HBs are the weakest. The HB energies in dimers also follow this rank ordering. However, the HB energies in dimers are much smaller than those obtained by the MTA-based method due to the loss in cooperativity contribution in the dimers. Thus, the calculated cooperativity contributions, for different types of HBs, fall in the range 0.64 to 5.73 kcal mol^-1 . We wish to emphasize based on the energetic rank ordering obtained by the MTA-based method that the O-H of water is a better HB donor than the N-H of ammonia. The reasons for the observed energetic rank ordering are two folds: (i) intrinsically stronger O-H…N HBs than the O-H…O ones as revealed by dimer energies and (ii) the higher cooperativity contribution in the former than the later ones. Indeed, the MTA-based method is useful in providing the missing energetic rank ordering of various type of HBs in neutral (NH₃ )_m (H₂ O)_n clusters, in the literature.

Two Stable Cd-MOFs as Dual-Functional Materials with Luminescent Sensing of Antibiotics and Proton Conduction

Construction and investigation of dual-functional metal-organic frameworks (MOFs) with luminescent sensing and proton conduction provide widespread applications in clean energy and environmental monitoring fields. By selecting a phosphonic acid ligand 4-pyridyl-CH₂N(CH₂PO₃H₂)₂ (H₄L) and coligand 2,2'-biimidazole (H₂biim), two cadmium-based MOFs [Cd_1.5(HL)(H₂biim)_0.5] (1) and (H₄biim)_0.5·[Cd₂(L)(H₂biim)Cl] (2) with different structures and properties have been hydrothermally synthesized by controlling reaction temperature. Based on the excellent thermal and chemical stabilities, and good luminescent stabilities in water solution, 1 and 2 can serve as luminescent sensors of chloramphenicol (CAP) with different quenching constant (K_SV) values and detection limits (LODs) in water, simulated environmental system, and real fish water system. Meanwhile, different sensing effects and possible sensing mechanisms are analyzed in detail. Moreover, 1 and 2 can also serve as good proton-conducting materials. The proton conductivities can reach up to 1.41 × 10^-4 S cm^-1 for 1 and 1.02 × 10^-3 S cm^-1 for 2 at 368 K and 95% relative humidity (RH). Among them, 2 shows better luminescent sensing and proton conduction performance than 1, which indicates that different crystal structures have a great impact on the properties of MOFs. Through the discussion of the relationship between structures and properties in detail, the possible reasons for the differences in properties are obtained, which can provide theoretical guidance for the rational design of this kind of dual-functional MOFs in the future.

A Potential Roadmap to Integrated Metal Organic Framework Artificial Photosynthetic Arrays

Metal organic frameworks (MOFs), a class of coordination polymers, gained popularity in the late 1990s with the efforts of Omar Yaghi, Richard Robson, Susumu Kitagawa, and others. The intrinsic porosity of MOFs made them a clear platform for gas storage and separation. Indeed, these applications have dominated the vast literature in MOF synthesis, characterization, and applications. However, even in those early years, there were hints to more advanced applications in light-MOF interactions and catalysis. This perspective focuses on the combination of both light-MOF interactions and catalysis: MOF artificial photosynthetic assemblies. Light absorption, charge transport, H2O oxidation, and CO2 reduction have all been previously observed in MOFs; however, work toward a fully MOF-based approach to artificial photosynthesis remains out of reach. Discussed here are the current limitations with MOF-based approaches: diffusion through the framework, selectivity toward high value products, lack of integrated studies, and stability. These topics provide a roadmap for the future development of fully integrated MOF-based assemblies for artificial photosynthesis.

Enhancing Proton Conductivity of Nafion Membrane by Incorporating Porous Tb-Metal-Organic Framework Modified with Nitro Groups

A rigid carboxylate ligand with a nitro functional group was selected to coordinate with Tb(III) cation, and Tb-MOF ({[Tb₄(L)₄(OH)₄(H₂O)₃]·8H₂O}_n, H₂L = 2-nitroterephthalic acid) with large porous and excellent hydrophilicity was obtained successfully. The obtained Tb-MOF was filled into the Nafion matrix to improve its proton conduction performance. The Tb-MOF/Nafion composite membrane was characterized by PXRD, IR, and thermogravimetry (TG) and for water uptake, area swelling, and proton conductivity. The activity energy, E_a, value of the composite membrane, which is a very important factor affecting the proton conduction performance of the membrane, was fitted and calculated. It was revealed that Tb-MOF can improve the proton conductivities of composite membranes, and the improvement degree and E_a value were both affected by Tb-MOF content. When Tb-MOF content was 5%, the proton conductivity of the composite membrane was 1.53 × 10^-2 S·cm^-1 at 100% RH and 80 °C, which is 1.81 times that of the pure Nafion membrane. A MOF containing a nitro functional group was first doped into Nafion in this study and exhibited excellent performance for improving composite membrane proton conductivity. This study will provide a valuable reference for designing different functionalized MOFs to promote the proton conductivities of proton exchange membranes.

Three layered cucurbit[6]uril-based metal-organic rotaxane networks functionalized by sulfonic groups for proton conduction

Three new cucurbit[6]uril (CB[6])-based metal-organic rotaxane networks (MORNs) (named CUST-711, CUST-712, and CUST-713) functionalized by a sulfonic group (-SO₃H) have been designed and synthesized via a hydrothermal method. All three compounds exhibited similar two-dimensional (2D) wave layer structures. Their stability under different temperature and relative humidity conditions has been investigated and all the compounds showed excellent stability. Furthermore, their proton conduction properties were also discussed in detail. Due to different structures and sulfonic group sites, the three compounds exhibited different proton conduction abilities of which CUST-712 exhibited an intrinsic relatively high proton conductivity (1.75 × 10^-4 S cm^-1 at 85 °C and 97% relative humidity). These results provide ideas for the design and synthesis of functional CB[6]-based metal-organic rotaxane frameworks (MORFs) as proton conducting materials.

Gate Opening without Volume Change Triggers Cooperative Gas Interactions, Underpins an Isotherm Step in Metal-Organic Frameworks

Three halogenated metal-organic frameworks (MOFs) reported recently exhibited a second step in their CO₂ gas adsorption isotherms. The emergence of halogen-bonding interactions beyond a threshold gas pressure between the framework halogen and the CO₂ guest was conjectured to be the underlying reason for the additional step in the isotherm. Our investigation employing periodic density functional theory calculations did not show significant interactions between the halogen and CO₂ molecules. Further, using a combination of DFT-based ab initio molecular dynamics and grand canonical Monte Carlo simulations, we find that the increased separation of framework nitrate pairs facing each other across the pore channel enables the accommodation of an additional CO₂ molecule which is further stabilized by cooperative interactions─an observation that facilely explains the second isotherm step. The increased separation between the nitrate groups can occur without any lattice expansion, consistent with experiments. The results point to a structural feature to achieve this isotherm step in MOFs that neither possess large pores nor exhibit large-scale structural changes such as breathing.

Electrochemical Proton Storage: From Fundamental Understanding to Materials to Devices

Simultaneously improving the energy density and power density of electrochemical energy storage systems is the ultimate goal of electrochemical energy storage technology. An effective strategy to achieve this goal is to take advantage of the high capacity and rapid kinetics of electrochemical proton storage to break through the power limit of batteries and the energy limit of capacitors. This article aims to review the research progress on the physicochemical properties, electrochemical performance, and reaction mechanisms of electrode materials for electrochemical proton storage. According to the different charge storage mechanisms, the surface redox, intercalation, and conversion materials are classified and introduced in detail, where the influence of crystal water and other nanostructures on the migration kinetics of protons is clarified. Several reported advanced full cell devices are summarized to promote the commercialization of electrochemical proton storage. Finally, this review provides a framework for research directions of charge storage mechanism, basic principles of material structure design, construction strategies of full cell device, and goals of practical application for electrochemical proton storage.

Ionothermal synthesis of a highly crystalline zirconium phosphate proton conductor

A highly crystalline one-dimensional zirconium phosphate, (NH₄)₂[ZrF(PO₄)(HPO₄)] (ZrP-3), was facilely synthesized by the ionothermal method. The robust structure and rich hydrogen-bonded network make ZrP-3 an excellent proton conductor by having a proton conductivity higher than 10^-2 S cm^-1 at 90 °C and 95% RH. The remarkable stability makes ZrP-3 a promising solid electrolyte material for proton exchange membrane fuel cells.

High Diffusion Permeability of Anion-Exchange Membranes for Ammonium Chloride: Experiment and Modeling

It is known that ammonium has a higher permeability through anion exchange and bipolar membranes compared to K+ cation that has the same mobility in water. However, the mechanism of this high permeability is not clear enough. In this study, we develop a mathematical model based on the Nernst−Planck and Poisson’s equations for the diffusion of ammonium chloride through an anion-exchange membrane; proton-exchange reactions between ammonium, water and ammonia are taken into account. It is assumed that ammonium, chloride and OH− ions can only pass through membrane hydrophilic pores, while ammonia can also dissolve in membrane matrix fragments not containing water and diffuse through these fragments. It is found that due to the Donnan exclusion of H+ ions as coions, the pH in the membrane internal solution increases when approaching the membrane side facing distilled water. Consequently, there is a change in the principal nitrogen-atom carrier in the membrane: in the part close to the side facing the feed NH4Cl solution (pH < 8.8), it is the NH4+ cation, and in the part close to distilled water, NH3 molecules. The concentration of NH4+ reaches almost zero at a point close to the middle of the membrane cross-section, which approximately halves the effective thickness of the diffusion layer for the transport of this ion. When NH3 takes over the nitrogen transport, it only needs to pass through the other half of the membrane. Leaving the membrane, it captures an H+ ion from water, and the released OH− moves towards the membrane side facing the feed solution to meet the NH4+ ions. The comparison of the simulation with experiment shows a satisfactory agreement.

Super Mg2+ Conductivity around 10-3 S cm-1 Observed in a Porous Metal-Organic Framework

We first report a solid-state crystalline “Mg²⁺ conductor” showing a superionic conductivity of around 10^–3 S cm^–1 at ambient temperature, which was obtained using the pores of a metal–organic framework (MOF), MIL-101, as ion-conducting pathways. The MOF, MIL-101⊃{Mg(TFSI)₂}_1.6 (TFSI^– = bis(trifluoromethanesulfonyl)imide), containing Mg²⁺ inside its pores, showed a superionic conductivity of 1.9 × 10^–3 S cm^–1 at room temperature (RT) (25 °C) under the optimal guest vapor (MeCN), which is the highest value among all Mg²⁺-containing crystalline compounds. The Mg²⁺ conductivity in the MOF was estimated to be 0.8 × 10^–3 S cm^–1 at RT, by determining the transport number of Mg²⁺ (t_Mg²⁺ = 0.41), which is the level as high as practical use for secondary battery. Measurements of adsorption isotherms, pressure dependence of ionic conductivity, and in situ Fourier transform infrared measurements revealed that the “super Mg²⁺ conductivity” is caused by the efficient migration of the Mg²⁺ carrier with the help of adsorbed guest molecules.

A dual-function Cd-MOF with high proton conduction and excellent fluorescence detection of pyridine

Metal-organic frameworks have great potential in the field of proton conducting materials and fluorescent probes due to their structural tunability and designability. A novel water-stable metal organic framework material [Cd₂(Hdpb)(H₂O)₃] (Cd-MOF) was synthesized based on H₅dpb (H₅dpb = 3,5-diphosphonobenzoic acid) and Cd²⁺ ions. Cd²⁺ ions are connected with phosphonates and carboxyl groups of H₅dpb to form an infinitely extended 1D chain, which is further connected by the Hdpb^4- ligand and coordinated water to form a three-dimensional network structure. There are hydrogen bond networks in the 3D structure of the Cd-MOF, which are favorable for proton transfer, achieving its maximum proton conductivity of 2.97 × 10^-3 S cm^-1 at 338 K and 98% relative humidity (RH). To realize its application in fuel cells, the Cd-MOF was introduced into the chitosan (CS) matrix, and a series of composite membranes (Cd-MOF@CS-X) with high proton conductivity were obtained. The results of AC impedance show that the proton conductivity of Cd-MOF@CS-5 reaches 3.55 × 10^-1 S cm^-1 at 358 K and 98% RH, which is comparable to the highest values reported for MOF-polymer complexes. Moreover, the Cd-MOF can be used as a selective fluorescent probe for pyridine detection, and its detection limit can reach 1.0 × 10^-6 M. A bifunctional MOF with proton conduction and pyridine recognition is reported for the first time, and has important reference value for the practical application of functional MOFs in both electrochemical and luminescence sensing.

Synthesis, spectroscopic, and computational studies on molecular charge-transfer complex of 2-((2-hydroxybenzylidene) amino)-2-(hydroxymethyl) propane-1, 3-diol with chloranilic acid: Potential antiviral activity simulation of CT-complex against SARS-CoV-2

An innovative charge-transfer complex between the Schiff base 2-((2-hydroxybenzylidene) amino)-2-(hydroxymethyl) propane-1,3-diol [SAL-THAM] and the π-acceptor, chloranilic acid (CLA) within the mole ratio (1:1) was synthesized and characterized aiming to investigate its electronic transition spectra in acetonitrile (ACN), methanol (MeOH) and ethanol (EtOH) solutions. Applying Job`s method in the three solvents supported the 1:1 (CLA: SAL-THAM) mole ratio complex formation. The formation of stable CT- complex was shown by the highest values of charge-transfer complex formation constants, K_CT, calculated using minimum-maximum absorbance method, with the sequence, acetonitrile > ethanol > methanol DFT study on the synthesized CT complex was applied based on the B3LYP method to evaluate the optimized structure and extract geometrical and reactivity parameters. Based on TD-DFT theory, the electronic properties, ¹H and ¹³C NMR, IR, and UV-Vis spectra of the studied system in different solvents showing good agreement with the experimental studies. MEP map described the possibility of hydrogen bonding and charge transfer in the studied system. Finally, a computational approach for screening the antiviral activity of CT - complex towards SARS-CoV-2 coronavirus protease via molecular docking simulation was conducted and confirmed with molecular dynamic (MD) simulation.

Proton Conductive Lanthanide-Based Metal-Organic Frameworks: Synthesis Strategies, Structural Features, and Recent Progress

In the fields of proton exchange membrane fuel cells as well as impedance recognition, molecular sieve, and biochemistry, the development of proton conductive materials is essential. The design and preparation of the next generation of proton conductive materials-crystalline metal-organic framework (MOF) materials with high proton conductivity and excellent water stability-are facing great challenges. Due to the large radius and high positive charge of lanthanides, they often interact with organic ligands to exhibit high coordination numbers and flexible coordination configurations, resulting in the higher stability of lanthanide-based MOFs (Ln-MOFs) than their transition metal analogues, especially regarding water stability. Therefore, Ln-MOFs have attracted considerable attention. This review offers a view of the latest progress of proton conductive Ln-MOFs, including synthesis strategy, structural characteristics, and advantages, proton conductivity, proton conductive mechanism, and applications. More importantly, by discussing structure-property relationships, we searched for and analyzed design techniques and directions of development of Ln-MOFs in the future. The latest progress of synthesis strategy, structural characteristics, proton conductive properties and mechanism and applications on Ln-MOFs. Ln-MOFS Lanthanide-based MOFs, MOF metal-organic framework, PEMFC proton exchange membrane fuel cells.

MOF-enabled confinement and related effects for chemical catalyst presentation and utilization

A defining characteristic of nearly all catalytically functional MOFs is uniform, molecular-scale porosity. MOF pores, linkers and nodes that define them, help regulate reactant and product transport, catalyst siting, catalyst accessibility, catalyst stability, catalyst activity, co-catalyst proximity, composition of the chemical environment at and beyond the catalytic active site, chemical intermediate and transition-state conformations, thermodynamic affinity of molecular guests for MOF interior sites, framework charge and density of charge-compensating ions, pore hydrophobicity/hydrophilicity, pore and channel rigidity vs. flexibility, and other features and properties. Collectively and individually, these properties help define overall catalyst functional behaviour. This review focuses on how porous, catalyst-containing MOFs capitalize on molecular-scale confinement, containment, isolation, environment modulation, energy delivery, and mobility to accomplish desired chemical transformations with potentially superior selectivity or other efficacy, especially in comparison to catalysts in homogeneous solution environments.

Proton-conducting metal–organic frameworks with linkers containing anthracenyl and sulfonate groups

Co(dia)1.5(Hsip)(H2O)·H2O (1) and Zn2(μ-OH)(dia)2(sip)·2H2O (2) were prepared from the same set of ligand precursors. They exhibited bnn and dia topologies, respectively. Factors that contributed to the higher proton conductivity of 1 were presented.

Sequential enhancement of proton conductivity by aliovalent cadmium substitution and post-synthetic esterolysis in a carboxylicate-functionalized indium framework with dimethylaminium templates

A sequential improving strategy has devised and implemented on a 3D open framework In-BQ showing 2D intersected channels filled by dimethylamine and its protonated cation constructed by −COOCH3 functionalized anilicate...

Unique protonconduction 3D ZnII metal organic framework exposure to aquaammonia vapor to enhance conductivity

The ZnII MOF with proton-conductivity obtained an optimal conductivity of 1.38 × 10−3 S cm−1 (100 °C) under 2 M aquaammonia vapor.