A novel BODIPY-based fluorescent probe for naked-eye detection of the highly alkaline pH

A novel alkaline pH-responsive probe based on an asymmetric aza-BODIPY was synthesized in a one-pot Schiff base formation reaction. This pH-sensitive probe comprises an asymmetric aza-BODIPY as the luminescent core, with a benzothiazole moiety connected via an imine bond serving as the recognition site. The probe exhibits a turn-off fluorescence response upon exposure to alkaline pH (9.6-12.4), while a bathochromic band in the absorption emerges due to its extended π-conjugation system, accompanied by a visible colorimetric change from yellow to orange to red. Furthermore, the probe responds linearly in the highly alkaline region, with a pKa of 11.65. The recognition mechanism of the probe towards alkaline pH relies on the deprotonation of the imine group on the aza-BODIPY core, leading to an enhanced degree of π-electron conjugation. The quenched fluorescence intensity is attributed to the increased non-radiative decay of the deprotonated form of the probe. The probe demonstrates high reliability for practical applications due to its photostability and reversibility. This study provides new insights into the design of probes for detecting high alkaline pH levels.

Construction of Boron Difluoride Complexes with Asymmetric N,N'-Bidentate Ligands

Boron difluoride (BF2) complexes with asymmetrical N,N'-bidentate ligands have received increasing attention due to their fascinating properties and broad applications. They are generally constructed in two steps: ligand formation, followed by boron complexation. This review focuses on categorizing these BF2 complexes based on the key synthetic strategies that have been applied in the ligand formation steps. The post-functionalization, properties and applications of different types of BF2 complexes are presented. Their challenges and opportunities are also discussed. This should help the future rational design and synthesis of BF2 complexes with intriguing properties and practical applications.

A two-photon fluorescent probe for highly selective detection of Cys over GSH and Hcy based on the Michael addition and transcyclization mechanism and its application in bioimaging and protein straining in SDS-PAGE

BACKGROUND

Cysteine (Cys), glutathione (GSH), and homocysteine (Hcy), as three major biothiols are involved in a variety of physiological processes and play a crucial role in plant growth. Abnormal levels of Cys can cause plants to fail to grow properly. To date, although a very large number of fluorescent probes have been reported for the detection of biothiols, very few of them can be used for the selective discrimination of Cys from GSH and Hcy due to their structural similarity, and only a few of them can be used for plant imaging.

RESULTS

Here, three fluorescent probes (o-/m-/p-TMA) based on TMN fluorophore and the ortho-/meta-/para-substituted maleimide recognition groups were constructed to investigate the selective response effect of Cys. Compared to the o-/m-TMA, p-TMA can selectively detect Cys over GSH and Hcy with a rapid response time (10 min) and a low detection limit (0.26 μM). The theoretical calculation confirmed that the intermediate p-TMA-Cys-int has shorter interatomic reaction distances (3.827 Å) compared to o-/m-TMA-Cys (5.533/5.287 Å), making it more suitable for further transcyclization reactions. Additionally, p-TMA has been employed for selective tracking of exogenous and endogenous Cys in Arabidopsis thaliana using both single-/two-photon fluorescence imaging. Furthermore, single cell walls produced obvious two-photon fluorescence signals, indicating that p-TMA can be used for high-concentration Cys analysis in single cells. Surprisingly, p-TMA can be used as a fluorescent dye for protein staining in SDS-PAGE with higher sensitivity (7.49 μg/mL) than classical Coomassie brilliant blue (14.11 μg/mL).

SIGNIFICANCE

The outstanding properties of p-TMA make it a promising multifunctional molecular tool for the highly selective detection of Cys over GSH and Hcy in various complex environments, including water solutions, zebrafish, and plants. Additionally, it has the potential to be developed as a fluorescent dye for a simple and fast SDS-PAGE fluorescence staining method.

Far-red fluorescence and chiroptical properties of pyrrolopyrrole aza-BODIPYs induced by the B,O-chelation

A titanium-mediated aza-BODIPY synthesis using diketopyrrolopyrrole bearing o-anisyl substituents provided B,O-chelated pyrrolopyrrole aza-BODIPYs in a one-pot manner via ether bond cleavage and chelation of the resulting nucleophilic oxygen to the boron atom. The B,O-chelation not only induces the redshifts of absorption and fluorescence but also endows chiroptical properties.

Rational design and investigation of nonlinear optical response properties of pyrrolopyrrole aza-BODIPY-based novel push-pull chromophores

Intramolecular charge transfer (ICT)-based chromophores are highly sought after for designing near-infrared (NIR) absorbing and emitting dyes as well as for designing materials for nonlinear optical (NLO) applications. The properties of these 'push-pull' molecules can easily be modified by varying the electronic donor (D) and acceptor (A) groups as well as the π-conjugation linker. This study presents a methodical approach and employs quantum chemical analysis to explore the relationship between the structural features, electro-optical properties, and the NLO characteristics of molecules with D-π-A framework. The one- and two-photon absorption (2PA), linear polarizability (α), and first hyperpolarizability (β) of some novel chromophores, consisting of a dimeric aza-Boron Dipyrromethene (aza-BODIPY) analogue, called, pyrrolopyrrole aza-BODIPY (PPAB), serving as the acceptor, have been investigated. The electronic donors used in this study are triphenylamine (TPA) and diphenylamine (DPA), and they are conjugated to the acceptor via thienyl or phenylene π-linkers. Additionally, the Hyper-Rayleigh Scattering (βHRS), which enables direct estimation of the second-order NLO properties, is calculated for the studied chromophores with 1064 nm excitation in acetonitrile. The β value shows a significant increase with increasing solvent polarity, indicating that the ICT plays a crucial role in shaping the NLO response of the studied molecules. The enhancement of the 2PA cross-section of the investigated molecules can also be achieved by modulating the combinations of donors and linkers. The results of our study indicate that the novel D-π-A molecules designed in this work demonstrate considerably higher hyperpolarizability values than the standard p-nitroaniline, making them promising candidates for future NLO applications.

One-pot synthesis of azabora[6]helicene by a Schiff base forming reaction

Azabora[6]helicene as a new heterohelicene analogue was synthesized by a one-pot reaction of commercially available 2,6-diaminopyridine and benzo[c,d]indole-2(1H)-one and subsequent boron coordination. While the single-crystal X-ray diffraction analysis elucidated a helical structure in the solid state, a dynamic helicity inversion was observed in solution.

Facile Synthesis of Asymmetric aza-Boron Dipyrromethene Analogues Bearing Quinoxaline Moiety

An asymmetric aza-BODIPY analogue bearing quinoxaline moiety was synthesized via a titanium tetrachloride-mediated Schiff-base-forming reaction of 6,7-dimethyl-1,4-dihydroquinoxaline-2,3-dione and benzo[d]thiazol-2-amine. This novel aza-BODIPY analogue forms a complementary hydrogen-bonded dimer due to the quinoxaline moiety in the crystal structure. It also shows intense absorption and fluorescence, with fluorescence quantum yields close to unity. The electrochemical measurements and the DFT calculations revealed the presence of the low-lying HOMO, which benefits their potential applications as an electron-transporting material.

Aza-Dipyrrinate Stabilized Compounds with a Low-Valent Main Group Element

The possibility of using aza-dipyrromethene (a-DPM) ligands to stabilize compounds containing low-valent main group elements is demonstrated through the isolation of germylenes, a-DPM(p-tol)GeCl (2), a-DPM(Naph)GeCl (6), and a-DPM(Naph)GeN(TMS)2 (7) (tol=tolyl, Naph=naphthyl). Because of the presence of the a-DPM ligand, these germylenes exhibit an absorption maximum at around 640 nm, a highly red-shifted value previously unknown for germylenes.

Pyrrolopyrrole aza-BODIPY-based NIR-II fluorophores for in vivo dynamic vascular dysfunction visualization of vascular-targeted photodynamic therapy

Real-time monitoring vascular responses is crucial for evaluating the therapeutic effects of vascular-targeted photodynamic therapy (V-PDT). Herein, we developed a highly-stable and bright aggregation induced emission (AIE) fluorophore (PTPE3 NP) for dynamic fluorescence (FL) imaging of vascular dysfunction beyond 1300 nm window during V-PDT. The superior brightness (ϵ_maxΦ_{f>1000 nm} ≈ 180.05 M^-1 cm^-1) and high resolution of PTPE3 NP affords not only high-clarity images of whole-body and local vasculature (hindlimbs, mesentery, and tumor) but also high-speed video imaging for tracking blood circulation process. By virtue of the NPs' prolonged blood circulation time (t_1/2 ≈ 86.5 min) and excellent photo/chemical (pH, RONS) stability, mesenteric and tumor vascular dysfunction (thrombosis formation, vessel occlusion, and hemorrhage) can be successfully visualized during V-PDT by FL imaging for the first time. Furthermore, the reduction of blood flow velocity (BFV) can be monitored in real time for precisely evaluating efficacy of V-PDT. These provide a powerful approach for assessing vascular responses during V-PDT and promote the development of advanced fluorophores for biological imaging.

Post-Modification of Pyrrolopyrrole Aza-BODIPY toward High Near-Infrared Fluorescence Brightness

Pyrrolopyrrole aza-BODIPYs (PPABs), dimeric aza-BODIPY analogues, exhibit intense absorption and fluorescence in the visible and near-infrared (NIR) regions. Here, we developed a facile postmodification by palladium-catalyzed coupling reactions to synthesize a series of donor-acceptor-donor (D-A-D) PPABs. Despite the possible fluorescence quenching dictated by the energy-gap low, D-A-D PPABs exhibit high-fluorescence brightness in the NIR region, implying their potential use as a bright NIR emitter.

Enhanced Host-Guest Association and Fluorescence in Copolymers from Copper Salphen Complexes by Supramolecular Internalization of Anions

We describe the synthesis, crystallographic characterization of a new Cu-Salphen compound and its use as a host Lewis-acid against guest anions in two versions: a) free molecule, b) copolymerized with methyl methacrylate:n-butyl acrylate (1 : 4-wt.) as protective co-monomers. Higher contents in Cu-Salphen yielded larger and more homogeneous polymer sizes. Polymer size together with glass transitions, heat capacity, thermal degradation, guest-saturation degrees and host-guest species distribution profiles from spectrophotometric titrations explained growths of up to 630-fold in K₁₁ and 180000-fold in K₁₂ for the host's binding site attributable to a solvophobic protection from the macromolecular structure. Spectrofluorimetry revealed blue-shifted×13-16 larger luminescence for Cu-Salphen in the polymers (λ_em =488-498 nm) than that of the non-polymerized counterpart (λ_em =510-543 nm) and "turn-on" blue-shifted enhanced fluorescence upon guest association. We propose a cooperative incorporation of the guests occurring from the outer medium toward internally protected binding site pockets in the random coil polymer conformations.

Aza-BODIPY-based Fluorescent and Colorimetric Sensors and Probes

Aza-boron-dipyrromethenes (Aza-BODIPYs) represent an important class of chromophores absorbing and emitting in the near-infrared (NIR) region. They have unique optical and electronic features and higher physiological and photo stability than other NIR dyes. Especially after the development of facile synthetic routes, Aza-BODIPYs have become indispensable fluors that can find various applications ranging from chemosensors, bioimaging, phototherapy, solar energy materials, photocatalysis, photon upconversion, lasers, and optoelectronics. Herein, we review Aza-BODIPY based fluorescent and colorimetric chemosensors. We show the potential and untapped toolbox of Aza-BODIPY based fluorescent and colorimetric chemosensors. Hence, we divide the fluorescent and colorimetric chemosensors and probes into five sections according to the target analytes. The first section begins with the chemosensors developed for pH. Next, we discuss Aza-BODIPY based ion sensors, including metal ions and anions. Finally, we present the chemosensors and probes concerning reactive oxygen (ROS) and nitrogen species (RNS) along with biologically relevant species in the last two sections. We believe that Aza-BODIPYs are still in their infancy, and they have a promising future for translation from the bench to real biomedical and materials science applications. After two decades of intensive research, it seems that there are many more to come in this already fertile field. Overall, we hope that future work will further expand the applications of Aza-BODIPY in many areas.

Palladium-Catalyzed Preparation of N-Substituted Benz[c,d]indol-2-imines and N-Substituted Amino-1-naphthylamides

Here, we report a novel and facile protocol for the synthesis of benz[c,d]indol-2-imines via palladium-catalyzed C-C and C-N coupling of 8-halo-1-naphthylamines with isocyanides in a single step. The reaction features broad substrate scopes and mild conditions, providing an efficient alternative for the construction of antiproliferative agents and BET bromodomain inhibitors. If 0.1 mL of H₂O was added to this reaction, the N-substituted amino-1-naphthylamides could be obtained easily.

Real-Time Fluorescence Imaging of the Abscisic Acid Receptor Allows Nondestructive Visualization of Plant Stress

Environmental stress greatly decreases crop yield. The application of noninvasive techniques is one of the most practical and feasible ways of monitoring the health condition of plants under stress. However, it remains largely unsolved. A chemical fluorescent probe can be applied as a typical nondestructive method, but it has not been applied in living plants for stress detection to date. The abscisic acid (ABA) receptor plays a central role in conferring tolerance to environmental stresses and is an excellent target for developing fluorescent probes. Herein, we developed a fluorescence molecular imaging technology to monitor live plant stress by visualizing the protein expression level of the ABA receptor PYR1. A computer-aided designed indicator dye, flubactin, exhibited an 8-fold enhancement in fluorescence intensity upon interaction with PYR1. In vitro and in vivo experiments showed that flubactin is suitable to be used to detect salt stress in plants in real time. Moreover, the low toxicity of flubactin promotes its application in the future. Our work opens a new era for the nondestructive visualization of plant stress in vivo.

Design, synthesis and applications of NIR-emissive scaffolds of diketopyrrolopyrrole-aza-BODIPY hybrids

Herein, we report a facile synthetic method towards diketopyrrolopyrrole-aza-BODIPY hybrids by a two-step strategy. The three resulting fluorophores (LAB-TH4 ∼ LAB-TH6) showed absorption maxima up to 637 nm with molar extinction coefficients (ε) up to 32 300 M^-1 cm^-1 and emission maxima at 661 nm with a fluorescence quantum yield of 25.2% in solution. Due to good biocompatibility and strong ROS generation ability, they are useful fluorophores for bioimaging and photodynamic therapy (PDT). In addition, as a useful scaffold, a novel NIR-emissive conjugated polymer can be constructed by further bromination and Suzuki coupling polymerization.

Synthesis of trifluoromethylated aza-BODIPYs as fluorescence-19F MRI dual imaging and photodynamic agents

Dual-imaging agents with highly sensitive fluorescence (FL) imaging and highly selective fluorine-19 magnetic resonance imaging (¹⁹F MRI) are valuable for biomedical research. At the same time, photosensitizers with a high reactive oxygen species (ROS) generating capability are crucial for photodynamic therapy (PDT) of cancer. Herein, a series of tetra-trifluoromethylated aza-boron dipyrromethenes (aza-BODIPYs) were conveniently synthesized from readily available building blocks and their physicochemical properties, including ultraviolet-visible (UV-Vis) absorption, FL emission, photothermal efficacy, ROS generating efficacy, and ¹⁹F MRI sensitivity, were systematically investigated. An aza-BODIPY with 12 symmetrical fluorines was identified as a potent FL-¹⁹F MRI dual-imaging traceable photodynamic agent. It was found that the selective introduction of trifluoromethyl (CF₃) groups into aza-BODIPYs may considerably improve their UV absorption, FL emission, photothermal efficacy, and ROS generating properties, which lays the foundation for the rational design of trifluoromethylated aza-BODIPYs in biomedical applications.

Strategic Construction of Sulfur-Bridged BODIPY Dimers and Oligomers as Heavy-Atom-Free Photosensitizers

An efficient strategy for building sulfur-bridged oligo-BODIPYs based on the S_NAr reaction is described. These oligo-BODIPYs showed broadband and strong visible-near-infrared (NIR) light absorption, strong intramolecular exciton coupling, and efficient intersystem crossing (ISC). Generation of ¹O₂ as well as O₂^•- under irradiation was found to give high reactive oxygen species generation efficiencies for those oligomers.

Janus Pyrrolopyrrole Aza-dipyrrin: Hydrogen-Bonded Assemblies and Slow Magnetic Relaxation of the Cobalt(II) Complex in the Solid State

A novel pyrrolopyrrole azadipyrrin (Janus-PPAD) with Janus duality was synthesized by a Schiff base-forming reaction of diketopyrrolopyrrole. The orthogonal interactions of the hydrogen-bonding ketopyrrole and metal-coordinating azadipyrrin moieties in Janus-PPAD enabled the metal ions to be arranged at regular intervals: zinc(II) and cobalt(II) coordination provided metal-coordinated Janus-PPAD dimers, which can subsequently form hydrogen-bonded one-dimensional arrays both in solution and in the solid state. The supramolecular assembly of the zinc(II) complex in solution was investigated by ¹ H NMR spectroscopy based on the isodesmic model, in which a binding constant for the elongation of assemblies is constant. Owing to the tetrahedral coordination, in the solid state, the cobalt(II) complex exhibited a slow magnetic relaxation due to the negative D value of -27.1 cm^-1 with an effective relaxation energy barrier U_eff of 38.0 cm^-1 . The effect of magnetic dilution on the relaxation behavior is discussed. The relaxation mechanism at low temperature was analyzed by considering spin lattice interactions and quantum tunneling effects. The easy-axis magnetic anisotropy was confirmed, and the relevant wave functions were obtained by ab initio CASSCF calculations.

BOSHPY Fluorophores: BODIPY Analogues with Single Atom Controlled Aggregation

The reaction of diiminoisoindoline and iminoxoisoindoline with aminoazoles results in the formation of bidentate chelates that can be considered a semihemiporphyrazine. These chelates react with BF₃ to produce fluorescent compounds that are structurally analogous to the BODIPY dyes. These difluoroboron semihemiporphyrazines (BOSHPYs) aggregate, and the type of aggregation (H or J) is determined by a single atom at the periphery of the ligand (O or N). Notably, the imine terminated compounds remain fluorescent upon aggregation.

BOPYIN-anil and BOPYIN-boranil complex: Synthesis, spectroscopic properties and ESIPT process

Two BOPYIN dyes (W-1 and W-2) were synthesized, and their structural and photophysical properties were investigated. The absorption bands of both dyes located at ca. 350 and 500 nm in diverse solvents. The absorption profiles are a linear combination of those of the BOPYIN core and the boranil or anil subunits. Their emission spectra were observed at ca. 565 and 540 nm with 14.2% and 77% quantum yield in CHCl3, respectively. The absorption, excitation and emission spectra for both dyes confirm that the boranil or anil moieties could be used as an input energy antenna for cascade energy transfer to the fluorescent BOPYIN residue at 540 nm. Subsequently, ESIPT process of W-1 is fast and more likely to occur in non-polar solvent investigated by DFT calculation.

New Synthetic Approaches to N-Aryl and π-Expanded Diketopyrrolopyrroles as New Building Blocks for Organic Optoelectronic Materials

Diketopyrrolopyrrole (DPP) as a building block has been intensively investigated for organic semiconductors and light emitting materials. The synthesis of N-aryl DPPs remains challenging. Herein, we firstly report a new easily handled synthetic method toward N-aryl DPPs through H-DPP with diaryliodonium salt in the presence of CuI, which shows broad reaction scope. Sixteen N-aryl DPPs, including phenyl, furan and thiophene as flanking aromatic groups, were synthesized with yields up to 78 %. These N-aryl DPPs are fluorescent in both solutions and solid states, with quantum yields up to 96 % and 40 %, respectively. Moreover, we show that the reaction between H-DPP and diaryliodonium salt can lead to π-expanded DPPs by using Pd(OAc)₂ as catalyst. Nine π-expanded DPPs were obtained in 27-61 % yields. These π-expanded DPPs exhibit good semiconducting properties with hole mobility of 0.71 cm²  V^-1  s^-1 , demonstrating that they are useful building blocks for high performance organic semiconductors.

An Electron-Accepting aza-BODIPY-Based Donor-Acceptor-Donor Architecture for Bright NIR Emission

A bright near-infrared (NIR) fluorescent molecule was developed based on the donor-acceptor-donor (D-A-D) approach using an aza-BODIPY analog called pyrrolopyrrole aza-BODIPY (PPAB) as an electron-accepting chromophore. Directly introducing electron-donating triphenylamine (TPA) to develop a D-A-D structure caused redshifts of absorption and emission of PPAB into the NIR region with an enhanced fluorescence brightness of up to 5.2×10⁴  m^-1  cm^-1 , whereas inserting a phenylene linker between the TPA donor and the PPAB acceptor induced solvatochromic behavior in emission. Transient absorption spectra and theoretical calculations revealed the presence of a highly emissive hybridized locally excited and charge-transfer state in the former case and the contribution of the dark charge-separated state to the excited state in the latter case. The bright D-A-D PPAB as a novel emitter resulted in a NIR electroluminescence with a high external quantum efficiency of 3.7 % and a low amplified spontaneous emission threshold of ca. 80 μJ cm^-2 , indicating the high potential for NIR optoelectronic applications.

Harvesting triplet excitons for near-infrared electroluminescence via thermally activated delayed fluorescence channel

Near-infrared (NIR) emission is useful for numerous practical applications, such as communication, biomedical sensors, night vision, etc., which encourages researchers to develop materials and devices for the realization of efficient NIR organic light-emitting devices. Recently, the emerging organic thermally activated delayed fluorescence (TADF) emitters have attracted wide attention because of the full utilization of electron-generated excitons, which is crucial for achieving high device efficiency. Up to now, the TADF emitters have shown their potential in the deep red/NIR region. Considering the color purity and efficiency, however, the development of NIR TADF emitters still lags behind RGB TADF emitters, indicating that there is still much room to improve their performance. In this regard, this perspective mainly summarizes the past progress of molecular design on constructing TADF NIR emitters. We hope this perspective could provide a new vista in developing NIR materials and enlighten breakthroughs in both fundamental research and applications.

Switch-On Diketopyrrolopyrrole-Based Chemosensors for Cations Possessing Lewis Acid Character

For the first time diketopyrrolopyrroles (DPPs) have been synthesized directly from nitriles possessing (aza)crown ethers leading to macrocycle-dye hybrids. Depending on the nature of the linkage between DPP and macrocyclic ring, various coordination effects are found. The strong interaction of the cations possessing Lewis acid character such as Li⁺ , Mg²⁺ and Zn²⁺ with 2-aminopyridin-4-yl-DPPs, leading to a bathochromic shift of both emission and absorption, as well as to strong enhancement of fluorescence was rationalized in terms of strong binding of these cations to the N=C-NR₂ functionality. The same effect has been observed for protonation. Depending on the size and the structure of the macrocyclic ring the complexation of cations by aza-crown ethers plays an important but secondary role. The interaction of Na⁺ and K⁺ with 2-aminopyridin-4-yl-DPPs leads to moderate enhancement of fluorescence due to the aza-crown ethers binding. The very weak fluorescence of DPP bearing 2-dialkylamino-pyridine-4-yl substituents is due to the closely lying T₂ state and the resulting intersystem crossing.

Synthesis pathways for the preparation of the BODIPY analogues: aza-BODIPYs, BOPHYs and some other pyrrole-based acyclic chromophores

This mini-review summarizes the synthesis strategies for the preparation and post-functionalization of aza-BODIPYs, BOPHYs, “half-Pcs”, biliazines, MB-DIPYs, semihemiporphyrazines, BOIMPYs, BOPPYs, BOPYPYs, BOAHYs, and BOAPYs.

Homo- and hetero-metallophilicity-driven synthesis of highly emissive and stimuli-responsive Au(i)–Cu(i) double salts

Discrete complex salts having Au···Au and Au···Cu interactions were obtained as three crystalline polymorphs exhibiting various emission colors with high efficiency. Solvent vapor caused crystal-to-crystal transition, changing the emission color.

B←N-Incorporated Dibenzo-azaacene with Selective Near-Infrared Absorption and Visible Transparency

Organic compounds with selective near-infrared absorption and visible transparency are very desirable for fabrication of transparent/semitransparent optoelectronic devices. Herein, we develop a molecule with selective near-infrared absorption property, QBNA-O, in which four B←N units are incorporated to the core and two benzodioxin groups are introduced at the termini of the dibenzo-azaacene skeleton. QBNA-O exhibits a small optical gap of 1.39 eV due to the strong electron-donating benzodioxin groups and the strong electron-withdrawing B←N units. In toluene solution, QBNA-O shows a strong absorption peak at 856 nm with the full width at half maximum (FWHM) of only 41 nm as well as very weak absorption in the visible range from 380 nm to 760 nm. Thin films of QBNA-O exhibit the average visible transparency (AVT) of 78 % at the thickness of 205 nm and 90 % at the thickness of 45 nm. Solution-processed organic field-effect transistors (OFETs) of QBNA-O display ambipolar transporting behavior with the electron mobility of 0.52 cm²  V^-1  s^-1 and the hole mobility of 0.013 cm²  V^-1  s^-1 together with excellent air-stability. The selective NIR absorbing property and excellent charge transporting property imply that QBNA-O can be used to fabricate transparent organic optoelectronic devices.

How To Make Nitroaromatic Compounds Glow: Next-Generation Large X-Shaped, Centrosymmetric Diketopyrrolopyrroles

Red‐emissive π‐expanded diketopyrrolopyrroles (DPPs) with fluorescence reaching λ=750 nm can be easily synthesized by a three‐step strategy involving the preparation of diketopyrrolopyrrole followed by N‐arylation and subsequent intramolecular palladium‐catalyzed direct arylation. Comprehensive spectroscopic assays combined with first‐principles calculations corroborated that both N‐arylated and fused DPPs reach a locally excited (S₁) state after excitation, followed by internal conversion to states with solvent and structural relaxation, before eventually undergoing intersystem crossing. Only the structurally relaxed state is fluorescent, with lifetimes in the range of several nanoseconds and tens of picoseconds in nonpolar and polar solvents, respectively. The lifetimes correlate with the fluorescence quantum yields, which range from 6 % to 88 % in nonpolar solvents and from 0.4 % and 3.2 % in polar solvents. A very inefficient (T₁) population is responsible for fluorescence quantum yields as high as 88 % for the fully fused DPP in polar solvents.

Pyridyl-Anchored Type BODIPY Sensitizer-TiO2 Photocatalyst for Enhanced Visible Light-Driven Photocatalytic Hydrogen Production

Dye-sensitized photocatalytic hydrogen production using a boron-dipyrromethene (BODIPY) organic material having a pyridyl group at the anchor site was investigated. Phenyl, carbazole, and phenothiazine derivatives were introduced into BODIPY dyes, and their photocatalytic activities were examined. Identification was performed by nuclear magnetic resonance (NMR), infrared (IR), mass (MS) spectra, and absorption spectra, and catalyst evaluation was performed by using visible-light irradiation and photocatalytic hydrogen production and photocurrent. These dyes have strong absorption at 600–700 nm, suggesting that they are promising as photosensitizers. When the photocatalytic activity was examined, stable catalytic performance was demonstrated, and the activity of the Pt-TiO2 photocatalyst carrying a dye having a carbazole group was 249 μmol/gcat·h. Photocurrent measurements suggest that dye-sensitized photocatalytic activity is occurring. This result suggests that BODIPY organic materials with pyridyl groups as anchor sites are useful as novel dye-sensitized photocatalysts.

N-Arylation of Diketopyrrolopyrroles with Aryl Triflates

A new methodology for the double N-arylation of diketopyrrolopyrroles with aryl triflates has been developed. It is now possible to prepare diketopyrrolopyrroles bearing N-substituents derived from naphthalene, anthracene and coumarin in two steps from commercially available phenols. This represents the first time arenes lacking strong electron-withdrawing groups were inserted onto lactamic nitrogen atoms via arylation. The ability to incorporate heretofore unprecedented substituents translates to increased modulation of the resulting photophysical properties such as switching-on/off solvatofluorochromism. TD-DFT calculations have been performed to explore the nature of the relevant excited states. This new synthetic method made it possible to elucidate the influence of such substituents on the absorption and emission properties of tetraaryl substituted diketopyrrolopyrroles.

Rigid, yet flexible: formation of unprecedented silver MB-DIPY dimers with orthogonal chromophore geometry

Unprecedented for BODIPY/DIPY and aza-BODIPY/azaDIPY chemistry, MB-DIPY₂Ag₂ dimers with a twisted chromophore geometry were prepared and characterized by spectroscopy, X-ray crystallography, and DFT calculations.

Multichromophoric COO-BODIPYs: an advantageous design for the development of energy transfer and electron transfer systems

Synthesis and photonics avails a new design for multichromophoric arrays.

Rational design of pyrrolopyrrole-aza-BODIPY-based acceptor–donor–acceptor triads for organic photovoltaics application

Acceptor–donor–acceptor triads consisting of diketopyrrolopyrrole (DPP) or pyrrolopyrrole aza-BODIPY (PPAB) or both as acceptors and cyclopentadithiophene as a donor were rationally designed for near infrared (NIR) photovoltaics application.

Computational Design of Near-Infrared Fluorescent Organic Dyes Using an Accurate New Wave Function Approach

The extensive research focusing on fluorescent organic dyes for bioimaging has made this in vivo method available for a diverse range of applications. One way to enhance this method is to tune the absorption and emission wavelengths of dyes to the near-infrared region where better light penetration and imaging resolution can be achieved. For this purpose, the well-known BODIPY dyes and their derivatives called aza-BODIPY have been the subject of extensive synthetic efforts. The interest in these systems stems from their excellent photophysical properties. Despite numerous studies, the rational design of near-infrared active dyes with desirable properties remains difficult. Here, we present a new wave function-based method for modeling excited states of large molecules, which has numerous theoretical advantages over the most commonly used electronic structure methods. This method is employed to suggest candidates for new dyes with the desired properties and to predict the absorption and fluorescence maxima and luminescence spectra of aza-BODIPY dyes with possible applications in fluorescence imaging.