Molecular Copper-Anthraquinone Photocatalysts for Robust Hydrogen Production

The development of robust and inexpensive photocatalysts for H2 production under visible light irradiation remains a significant challenge. This study presents a series of square planar copper anthraquinone complexes (R4N)CuL2 (R = ethyl, L = alizarin dianion (CuAA); R = n-butyl, L = purpurin dianion (CuPP), (2-hydroxyanthraquinone)formamide dianion (CuAHA)) as molecular photocatalysts to achieve high long-term stability in visible-light-driven H2 production. These complexes are self-sensitized by the anthraquinone ligands and serve as proton reduction photocatalysts without additional photosensitizers or catalysts. Under irradiation of blue light, complex CuAA produces H2 in a mixture of H2O/DMF with undiminished activity over 42 days, giving a turnover number exceeding 6800. Electrochemical and UV-vis studies are consistent with an EECC mechanism (E: electron transfer and C: protonation) in the catalytic cycle. The initial photochemical steps involve conversion of both anthraquinone ligands to hydroquinones. Further light-driven reductions of the hydroquinones followed by two protonation steps results in formation of H2. Dependence of the catalytic rate on the concentration of H2O suggests that either the generation of a CuII-H intermediate by protonation or heterocoupling between CuII-H and H+ to produce H2 is the turnover-limiting step in catalysis.

Transforming Red Phosphorus Photocatalysis: Dual Roles of Pre-Anchored Ru Single Atoms in Defect and Interface Engineering

Crystalline red phosphorus (CRP), known for its promising photocatalytic properties, faces challenges in photocatalytic hydrogen evolution (PHE) due to undesired inherent charge deep trapping and recombination effects induced by defects. This study overcomes these limitations through an innovative strategy in integrating ruthenium single atoms (Ru1) within CRP to simultaneously repair the intrinsic undesired vacancy defects and serve as the uniformly distributed anchoring sites for a controllable growth into ruthenium nanoparticles (RuNP). Hence, a highly functionalized CRP with Ru1 and RuNP (Ru1-NP/CRP) with concerted effects in regulating electronic structures and promoting interfacial charge transfer has been achieved. Advanced characterizations unveil the pioneering dual role of pre-anchored Ru1 (analogous to the "Tai Chi" principle) in transforming CRP photocatalysis. The regulations of vacancy defects on the surface of CRP minimize the detrimental deep charge trapping, resulting in the prolonged lifetime of active charges. With the well-distributed in situ growth of RuNP on Ru1 sites, the constructed robust "bridge" that connects CRP and RuNP facilitates constructive interfacial charge transfer. Ultimately, the synergistic effect induced by the pre-anchored Ru1 endows Ru1-NP/CRP with an exceptional PHE rate of 3175 μmol h-1 g-1, positioning it as one of the most efficient elemental-based photocatalysts available. This breakthrough underscores the crucial role of pre-anchoring metal single atoms at defect sites of catalysts in enhancing sustainable hydrogen production.

Catalyst-free regioselective sulfonylation of phenoxazine with sulfonyl hydrazides in H2O/HFIP

A facile catalyst-free sulfonylation of phenoxazine with sulfonyl hydrazides was efficiently developed in H2O/HFIP without any catalyst. This metal- and catalyst-free protocol is suitable for aromatic and aliphatic reagents to afford the corresponding sulfones in moderate to high yields. A gram-scale experiment was performed to assess the practicability of the method.

Self-Assembly of Nanovesicles for Enhanced Adsorption and Efficient Photodegradation of 2,4,6-Trichlorophenol

The compound 2,4,6-trichlorophenol poses significant risks to both the aquatic environment and human health. Its inherent persistence and stability present challenges in achieving complete purification, thus warranting its inclusion as a priority pollutant. The present study reports the development of an amphiphilic small-molecule compound that self-assembles into nanovesicles exhibiting remarkable adsorption and photodegradation capabilities. Through the synergistic effects of hydrogen bonding, van der Waals forces, π-π interactions, and electrostatic interactions, these vesicles efficiently adsorb 2,4,6-trichlorophenol from aqueous solutions within 1 min while demonstrating exceptional environmental stability and broad applicability. Upon self-assembly into vesicles, not only are more adsorption sites exposed, but charge separation and migration within the vesicles are also facilitated. Through the synergistic effects of adsorption and photodegradation, complete removal of 2,4,6-trichlorophenol in aqueous solution can be achieved within 8 h while exhibiting excellent recycling capability. This approach offers a viable strategy for designing and synthesizing pure organic photodegradable materials.

A metal-free cascaded process for efficient H2O2 photoproduction using conjugated carbonyl sites

Carbon-based metal-free catalysts are promising green catalysts for photocatalysis and electrocatalysis due to their low cost and environmental friendliness. A key challenge in utilizing these catalysts is identifying their active sites, given their poor crystallinity and complex structures. Here we demonstrate the key structure of the double-bonded conjugated carbon group as a metal-free active site, enabling efficient O2 photoreduction to H2O2 through a cascaded water oxidation - O2 reduction process. Using ethylenediaminetetraacetic acid as a precursor, we synthesized various carbon-based photocatalysts and analyzed their structural evolution. Under the polymerization conditions of 260 °C to 400 °C, an N-ethyl-2-piperazinone-like structure was formed on the surface of the catalyst, resulting in high photocatalytic H2O2 photoproduction (2884.7 μmol g-1h-1) under visible light. A series of control experiments and theoretical calculations further confirm that the double-bond conjugated carbonyl structure is the key and universal feature of the active site of metal-free photocatalysts.

Carbon- and Nitrogen-Based Complexes as Photocatalysts for Prebiotic and Oxygen Chemistry during Earth Evolution

Sunlight has long served as primary energy source on our planet, shaping the behavior of living organisms. Extensive research has been dedicated to unraveling the evolutionary pathways involved. When the formation of Earth atmosphere, it primarily consisted of small gas molecules, which are considered crucial for the emergence of life. Recent demonstrations have shown that these molecules can also be transformed into semiconductors, with the potential to harness solar energy and catalyze chemical reactions as photocatalysts. Building upon this research, this minireview focuses on the potential revolutionary impact of photocatalysis on Earth. Initially, it examines key reactions, such as the formation of prebiotic molecules and the oxygen evolution reaction via water oxidation. Additionally, various C-N complexes in photocatalysts are explored, showcasing their roles in catalyzing chemical reactions. The conclusion and outlook provide a potential pathway for the evolution of Earth, shedding light on the significance of metal-free photocatalysts in development of Earth.

Pyridinethiolate-Capped CdSe Quantum Dots for Red-Light-Driven H2 Production in Water

The utilization of low-energy sunlight to produce renewable fuels is a subject of great interest. Here we report the first example of metal chalcogenide quantum dots (QDs) capped with a pyridinethiolate carboxylic acid (pyS-COOH) for red-light-driven H2 production in water. The precious-metal-free system is robust over 240 h, and achieves a turnover number (TON) of 43910±305 (vs Ni) with a rate of 31570±1690 μmol g-1 h-1 for hydrogen production. In contrast to the inactive QDs capped with other thiolate ligands, the CdSe-pyS-COOH QDs give a significantly higher singlet oxygen quantum yield [ΦΔ (1O2)] in solution.

Asymmetric Charge Distribution in One-Dimensional Metal-Organic Assemblies to Promote Photocatalytic Hydrogen Evolution

The local charge distribution of photocatalyst is crucial to the catalytic activity due to its influence on the charge separation process. Herein, we report two one-dimensional Ni-based metal-organic assemblies for efficient photocatalytic hydrogen evolution without using noble-metal cocatalysts. By adjusting the aromatic ring in the center of the tricarboxylic ligand, the photocatalytic hydrogen evolution activity was increased from 1715-2652 μmol h-1 g-1. The detailed mechanism study shows that the introduced nitrogen atoms in the ligands of the metal-organic coordination assembly could modulate the local charge distribution, and yielding a significant enhancement of the molecular dipole moment which engenders a propulsive force for the effective separation and transport of photoinduced charge carriers. This work provides insights into the local charge distribution via ligand modulation for enhancing the activity of photocatalysts.

Solar-Driven Biomass Reforming for Hydrogen Generation: Principles, Advances, and Challenges

Hydrogen (H2) has emerged as a clean and versatile energy carrier to power a carbon-neutral economy for the post-fossil era. Hydrogen generation from low-cost and renewable biomass by virtually inexhaustible solar energy presents an innovative strategy to process organic solid waste, combat the energy crisis, and achieve carbon neutrality. Herein, the progress and breakthroughs in solar-powered H2 production from biomass are reviewed. The basic principles of solar-driven H2 generation from biomass are first introduced for a better understanding of the reaction mechanism. Next, the merits and shortcomings of various semiconductors and cocatalysts are summarized, and the strategies for addressing the related issues are also elaborated. Then, various bio-based feedstocks for solar-driven H2 production are reviewed with an emphasis on the effect of photocatalysts and catalytic systems on performance. Of note, the concurrent generation of value-added chemicals from biomass reforming is emphasized as well. Meanwhile, the emerging photo-thermal coupling strategy that shows a grand prospect for maximally utilizing the entire solar energy spectrum is also discussed. Further, the direct utilization of hydrogen from biomass as a green reductant for producing value-added chemicals via organic reactions is also highlighted. Finally, the challenges and perspectives of photoreforming biomass toward hydrogen are envisioned.

Black Ultrathin Single-Crystalline Flakes of CuVP2S6 and CuCrP2S6 for Near-Infrared-Driven Photocatalytic Hydrogen Evolution

The development of new near-infrared-responsive photocatalysts is a fascinating and challenging approach to acquire high photocatalytic hydrogen evolution (PHE) performance. Herein, near-infrared-responsive black CuVP2S6 and CuCrP2S6 flakes, as well as CuInP2S6 flakes, are designed and constructed for PHE. Atom-resolved scanning transmission electron microscopy images and X-ray absorption fine structure evidence the formation of ultrathin single-crystalline sheet-like structure of CuVP2S6 and CuCrP2S6. The synthetic CuVP2S6 and CuCrP2S6, with a narrow bandgap of ≈1.0 eV, shows the high light-absorption edge exceeding 1100 nm. Moreover, through the femtosecond-resolved transient absorption spectroscopy, CuCrP2S6 displays the efficient charge transfer and long charge lifetime (18318.1 ps), which is nearly 3 and 29 times longer than that of CuVP2S6 and CuInP2S6, respectively. In addition, CuCrP2S6, with the appropriate d-band and p-band, is thermodynamically favorable for the H+ adsorption and H2 desorption by contrast with CuVP2S6 and CuInP2S6. As a result, CuCrP2S6 exhibits high PHE rates of 9.12 and 0.66 mmol h-1 g-1 under simulated sunlight and near-infrared light irradiation, respectively, far exceeding other layered metal phospho-sulfides. This work offers a distinctive perspective for the development of new near-infrared-responsive photocatalysts.

Recent progress of metal halide perovskite materials in heterogeneous photocatalytic organic reactions

Photocatalytic technology is widely regarded as an important way to utilize solar energy and achieve carbon neutrality, which has attracted considerable attentions in various fields over the past decades. Metal halide perovskites (MHPs) are recognized as "superstar" materials due to their exceptional photoelectric properties, readily accessible and tunable structure, which made them intensively studied in solar cells, light-emitting diodes, and solar energy conversion fields. Since 2018, increased attention has been focused on applying the MHPs as a heterogeneous visible light photocatalyst in catalyzing organic synthesis reactions. In this review, we present an overview of photocatalytic technology and principles of heterogeneous photocatalysis before delving into the structural characteristics, stability, and classifications of MHPs. We then focus on recent developments of MHPs in photocatalyzing various organic synthesis reactions, such as oxidation, cyclization, C-C coupling etc., based on their classifications and reported reaction types. Finally, we discuss the main limitations and prospects regarding the application of metal halide perovskites in organic synthesis.

Direct Z-scheme system of UiO-66 cubes wrapped with Zn0.5Cd0.5S nanoparticles for photocatalytic hydrogen generation synchronized with organic pollutant degradation

Optimized fabrication of Z-scheme photocatalyst based on MOF materials offers sustainable energy generation and environmental improvement due to their attractive properties. The Z-scheme heterojunctions consisting of UiO-66 cubes covered with Zn0.5Cd0.5S nanoparticles were fabricated by a facile solvothermal method. Thanks to the Z-scheme carrier transport under simulated sunlight irradiation, UiO-66@Zn0.5Cd0.5S exhibited enhanced photocatalytic performance of H2 generation synchronized with organic pollutant degradation in fluoroquinolone antibiotic wastewater. Synergistically, the highest comprehensive performance was obtained in ciprofloxacin solution. The H2 yield reached 224 μmol∙ g-1∙ h-1 and simultaneously the removal efficiency was up to 83.6 %. The degradation pathways revealed that the process of piperazine ring cleavage and decarboxylation also generates H protons, further promoting the production of H2. Therefore, the effective spatial separation and transfer of the photoinduced carriers are attributed to the good band structure, large specific surface area, and cooperative reduction and oxidation reactions of UiO-66@Zn0.5Cd0.5S, resulting in significant photocatalytic activity. The toxicity assessment of antibiotics and intermediate products during the photocatalytic reaction also verifies the reduction of environmental risk. This study highlights a promising way to expand the application of the MOFs-based photocatalyst in clean energy conversion coupling with water remediation.

Organizing Photosensitive and Photothermal Single-Sites Uniformly in a Trimetallic Metal-Organic Framework for Efficient Photocatalytic Hydrogen Evolution

Effective combination of the photosensitivity and photothermal property in photocatalyst is vital to achieve the maximum light utilization for superior photocatalytic efficiency. Herein, this work successfully organizes photosensitive Cd-NS single-sites and photothermal Ni-NS single-sites uniformly at a molecular level within a tailored trimetallic metal-organic framework. The optimized Ho6-Cd0.76Ni0.24-NS exhibits a superior photocatalytic hydrogen evolution rate of 40.06 mmol g-1 h-1 under visible-light irradiation and an apparent quantum efficiency of 29.37% at 420 nm without using cocatalysts or photosensitizers. A systematical mechanism study reveals that the uniformly organized photosensitive and photothermal single-sites have synergistic effect, which form ultrashort pathways for efficient transport of photoinduced electrons, suppress the recombination of photogenerated charge carriers, hence promote the hydrogen evolution activity. This work provides a promising approach for organizing dual-functional single-sites uniformly in photocatalyst for high-performance photocatalytic activity.

Synergistic effect of dual phase cocatalysts: MoC-Mo2C quantum dots anchored on g-C3N4 for high-stability photocatalytic hydrogen evolution

The extensive examination of hexagonal molybdenum carbide (β-Mo2C) as a non-noble cocatalyst in the realm of photocatalytic H2 evolution is predominantly motivated by its exceptional capacity to adsorb H+ ions akin to Pt and its advantageous conductivity characteristics. However, the H2 evolution rate of photocatalysts modified with β-Mo2C is limited as a result of their comparatively low ability to release H through desorption. Therefore, a facile method was employed to synthesize carbon intercalated dual phase molybdenum carbide (MC@C) quantum dots (ca. 3.13 nm) containing both α-MoC and β-Mo2C decorated on g-C3N4 (gCN). The synthesis process involved a simple and efficient combination of sonication-assisted self-assembly and calcination techniques. 3-MC@C/gCN exhibited the highest efficiency in generating H2, with a rate of 4078 µmol g-1h-1 under 4 h simulated sunlight irradiation, which is 13 times higher than pristine gCN. Furthermore, from the cycle test, 3-MC@C/gCN showcased exceptional photochemical stability of 65 h, as it maintained a H2 evolution rate of 40 mmol g-1h-1. The heightened level of activity observed in the 3-MC@C/gCN system can be ascribed to the synergistic effects of MoC-Mo2C that arise due to the existence of a carbon layer. The presence of a carbon layer enhanced the transmission of photoinduced electrons, while the MoC-Mo2C@C composite served as active sites, thereby facilitating the H2 production reaction of gCN. The present study introduces a potentially paradigm-shifting concept pertaining to the exploration of novel Mo-based cocatalysts with the aim of augmenting the efficacy of photocatalytic H2 production.

Pyrrolic Nitrogen Boosted H2 Generation from an Aqueous Solution of HCHO at Room Temperature by Metal-Free Carbon Catalysts

Hydrogen production from organic hydrides represents a promising strategy for the development of safe and sustainable technologies for H2 storage and transportation. Nonetheless, the majority of existing procedures rely on noble metal catalysts and emit greenhouse gases such as CO2/CO. Herein, we demonstrated an alternative N-doped carbon (CN) catalyst for highly efficient and robust H2 production from an aqueous solution of formaldehyde (HCHO). Importantly, this process generated formic acid as a valuable byproduct instead of CO2/CO, enabling a clean H2 generation process with 100% atom economy. Mechanism investigations revealed that the pyrrolic N in the CN catalysts played a critical role in promoting H2 generation via enhancing the transformation of O2 to generate •OO- free radicals. Consequently, the optimized CN catalysts achieved a remarkable H2 generation rate of 13.6 mmol g-1 h-1 at 30 °C. This finding is anticipated to facilitate the development of liquid H2 storage and its large-scale utilization.

Templated 2D Polymer Heterojunctions for Improved Photocatalytic Hydrogen Production

2D polymers have emerged as one of the most promising classes of organic photocatalysts for solar fuel production due to their tunability, charge-transport properties, and robustness. They are however difficult to process and so there are limited studies into the formation of heterojunction materials incorporating these components. In this work, a novel templating approach is used to combine an imine-based donor polymer and an acceptor polymer formed through Knoevenagel condensation. Heterojunction formation is shown to be highly dependent on the topological match of the donor and acceptor polymers with the most active templated material found to be between three and nine times more active for photocatalysis than its constituent components. Transient absorption spectroscopy reveals that this improvement is due to faster charge separation and more efficient charge extraction in the templated heterojunction. The templated material shows a very high hydrogen evolution rate of >20 mmol h-1 m-2 with an ascorbic acid hole scavenger but also produces hydrogen in the presence of only water and a cobalt-based redox mediator. This suggests the improved charge-separation interface and reduced trapping accessed through this approach could be suitable for Z-scheme formation.

Charge Concentration Limits the Hydrogen Evolution Rate in Organic Nanoparticle Photocatalysts

Time-resolved microwave conductivity is used to compare aqueous-soluble organic nanoparticle photocatalysts and bulk thin films composed of the same mixture of semiconducting polymer and non-fullerene acceptor molecule and the relationship between composition, interfacial surface area, charge-carrier dynamics, and photocatalytic activity is examined. The rate of hydrogen evolution reaction by nanoparticles composed of various donor:acceptor blend ratio compositions is quantitatively measured, and it is found that the most active blend ratio displays a hydrogen quantum yield of 0.83% per photon. Moreover, it is found that nanoparticle photocatalytic activity corresponds directly to charge generation, and that nanoparticles have 3× more long-lived accumulated charges relative to bulk samples of the same material composition. These results suggest that, under the current reaction conditions, with ≈3× solar flux, catalytic activity by the nanoparticles is limited by the concentration of electrons and holes in operando and not a finite number of active surface sites or the catalytic rate at the interface. This provides a clear design goal for the next generation of efficient photocatalytic nanoparticles.

Fabrication of -SO3H-functionalized polyphosphazene-reinforced proton conductive matrix-mixed membranes

Proton exchange membranes (PEMs) have emerged as very promising membranes for automotive applications because of their notable proton conductivity at low temperatures. These membranes find extensive utilization in fuel cells. Several polymeric materials have been used, but their application is constrained by their expense and intricate synthetic processes. Affordable and efficient synthetic methods for polymeric materials are necessary for the widespread commercial use of PEM technology. The polymeric combination of hexachlorocyclotriphosphazene (HCCP) and 4,4-diamino-2,2-biphenyldisulfonic acid facilitated the synthesis of PP-(PhSO3H)2, a polyphosphazene with built-in -SO3H moieties. Characterization revealed that it was a porous organic polymer with high stability. PP-(PhSO3H)2 exhibited a proton conductivity of up to 8.24 × 10-2 S cm-1 (SD = ±0.031) at 353 K under 98% relative humidity (RH), which was more than two orders of magnitude higher than that of its -SO3H-free analogue, PP-(Ph)2 (2.32 × 10-4 S cm-1) (SD = ±0.019) under identical conditions. Therefore, for application in a PEM fuel cell, PP-(PhSO3H)2-based matrix-mixed membranes (PP-(PhSO3H)2-MMMs) were fabricated by mixing them with polyacrylonitrile (PAN) in various ratios. The proton conductivity could reach up to 6.11 × 10-2 S cm-1 (SD = ±0.0048) at 353 K and 98%RH, when the weight ratio of PP-(PhSO3H)2 : PAN was 3 : 1, the value of which was comparable with those of commercially available electrolytes used in PEM fuel cells. PP-(PhSO3H)2-MMM (3 : 1) had an extended lifetime of reusability. Using phosphazene and bisulfonated multiple-amine modules as precursors, we demonstrated that a porous organic polymer with a highly effective proton-conductive matrix-mixed membrane for PEM fuel cells could be produced readily by an intuitive polymeric reaction.

Surface Engineered Single-atom Systems for Energy Conversion

Single-atom catalysts (SACs) are demonstrated to show exceptional reactivity and selectivity in catalytic reactions by effectively utilizing metal species, making them a favorable choice among the different active materials for energy conversion. However, SACs are still in the early stages of energy conversion, and problems like agglomeration and low energy conversion efficiency are hampering their practical applications. Substantial research focus on support modifications, which are vital for SAC reactivity and stability due to the intimate relationship between metal atoms and support. In this review, a category of supports and a variety of surface engineering strategies employed in SA systems are summarized, including surface site engineering (heteroatom doping, vacancy introducing, surface groups grafting, and coordination tunning) and surface structure engineering (size/morphology control, cocatalyst deposition, facet engineering, and crystallinity control). Also, the merits of support surface engineering in single-atom systems are systematically introduced. Highlights are the comprehensive summary and discussions on the utilization of surface-engineered SACs in diversified energy conversion applications including photocatalysis, electrocatalysis, thermocatalysis, and energy conversion devices. At the end of this review, the potential and obstacles of using surface-engineered SACs in the field of energy conversion are discussed. This review aims to guide the rational design and manipulation of SACs for target-specific applications by capitalizing on the characteristic benefits of support surface engineering.

Exceptional piezocatalytic H2 production of nitrogen-doped TiO2@carbon nanosheets induced by engineered piezoelectricity

Piezocatalytic hydrogen evolution is a promising strategy to generate sustainable energy. In this report, nitrogen-doped (N-doped) TiO2@ carbon nanosheets (N-TiO2@C NSs) was successfully synthesized using C3N4 as a multifunctional template. During the synthesis, the two-dimensional (2D) architecture of C3N4 nanosheets directed the synthesis of TiO2 nanosheets. In addition, nitrogens of C3N4 were doped into the TiO2 lattice. Simultaneously, C3N4 was transformed into N-doped carbon nanosheets. N doping broke the crystal symmetry of TiO2, which endowed TiO2 with promising piezoelectric properties. The N-doped carbon nanosheets derived from C3N4 improved charge carrier separation efficiency and served as a flexible support to inhibit structural damage under sonication. Therefore, the N-TiO2@C NSs exhibited highly efficient activity for piezocatalytic H2 production (6.4 mmol·g-1·h-1) in the presence of methanol, much higher than those of the previously reported piezocatalysts. Our method is hoped to provide a new strategy for designing highly efficient piezocatalysts.

Enhanced Photocatalytic and Photovoltaic Performance Arising from Unconventionally Low Donor-Y6 Ratios

Development of both organic photovoltaics (OPVs) and organic photocatalysts has focused on utilizing the bulk heterojunction (BHJ). The BHJ promotes charge separation and enhances the carrier lifetime, but may give rise to increased charge traps, hindering performance. Here, high photocatalytic and photovoltaic performance is displayed by electron donor-acceptor (D-A) nanoparticles (NPs) and films, using the nonfullerene acceptor Y6 and polymer donor PIDT-T8BT. In contrast to conventional D-A systems, the charge generation in PIDT-T8BT:Y6 NPs is mainly driven by Y6, allowing a high performance even at a low D:A mass ratio of 1:50. The high performance at the low mass ratio is attributed to the amorphous behavior of PIDT-T8BT. Low ratios are generally thought to yield lower efficiency than the more conventional ≈1:1 ratio. However, the OPVs exhibit peak performance at a D:A ratio of 1:5. Similarly the NPs used for photocatalytic hydrogen evolution show peak performance at the 1:6.7 D:A ratio. Interestingly, for the PIDT-T8BT:Y6 system, as the polymer proportion increases, a reduced photocatalytic and photovoltaic performance is observed. The unconventional D:A ratios provide lower recombination losses and increased charge-carrier lifetime with undisrupted ambipolar charge transport in bulk Y6, enabling better performance than conventional ratios. This work reports novel light-harvesting materials in which performance is reduced due to unfavorable morphology as D:A ratios move toward conventional ratios of 1:1.2-1:1.

Nanosized tubular clay minerals as inorganic nanoreactors for energy and environmental applications: A review to fill current knowledge gaps

Modern society pays further and further attention to environmental protection and the promotion of sustainable energy solutions. Heterogeneous photocatalysis is widely recognized as one of the most economically viable and ecologically sound technologies to combat environmental pollution and the global energy crisis. One challenge is finding a suitable photocatalytic material for an efficient process. Inorganic nanotubes have garnered attention as potential candidates due to their optoelectronic properties, which differ from their bulk equivalents. Among them, clay nanotubes (halloysite, imogolite, and chrysotile) are attracting renewed interest for photocatalysis applications thanks to their low production costs, their unique physical and chemical properties, and the possibility to functionalize or dope their structure to enhance charge-carriers separation into their structure. In this review, we provide new insights into the potential of these inorganic nanotubes in photocatalysis. We first discuss the structural and morphological features of clay nanotubes. Applications of photocatalysts based on clay nanotubes across a range of photocatalytic reactions, including the decomposition of organic pollutants, elimination of NOx, production of hydrogen, and disinfection of bacteria, are discussed. Finally, we highlight the obstacles and outline potential avenues for advancing the current photocatalytic system based on clay nanotubes. Our aim is that this review can offer researchers new opportunities to advance further research in the field of clay nanotubes-based photocatalysis with other vital applications in the future.

A Mini Review on Borate Photocatalysts for Water Decomposition: Synthesis, Structure, and Further Challenges

The development of novel photocatalysts, both visible and UV-responsive, for water decomposition reactions is of great importance. Here we focused on the application of the borates as photocatalysts in water decomposition reactions, including water splitting reaction, hydrogen evolution half-reaction, and oxygen evolution half-reaction. In addition, the rates of photocatalytic hydrogen evolution and oxygen evolution by these borate photocatalysts in different water decomposition reactions were summarized. Further, the review summarized the synthetic chemistry and structural features of existing borate photocatalysts for water decomposition reactions. Synthetic chemistry mainly includes high-temperature solid-state method, sol-gel method, precipitation method, hydrothermal method, boric acid flux method, and high-pressure method. Next, we summarized the crystal structures of the borate photocatalysts, with a particular focus on the form of the B-O unit and metal-oxygen polyhedral in the borates, and used this to classify borate photocatalysts, which are rarely mentioned in the current photocatalysis literature. Finally, we analyzed the relationship between the structural features of the borate photocatalysts and photocatalytic performance to discuss the further challenges faced by the borate photocatalysts for water decomposition reactions.

Design of Single-Atom Catalysts for E lectrocatalytic Nitrogen Fixation

The Electrochemical nitrogen reduction reaction (ENRR) can be used to solve environmental problems as well as energy shortage. However, ENRR still faces the problems of low NH3 yield and low selectivity. The NH3 yield and selectivity in ENRR are affected by multiple factors such as electrolytic cells, electrolytes, and catalysts, etc. Among these catalysts are at the core of ENRR research. Single-atom catalysts (SACs) with intrinsic activity have become an emerging technology for numerous energy regeneration, including ENRR. In particular, regulating the microenvironment of SACs (hydrogen evolution reaction inhibition, carrier engineering, metal-carrier interaction, etc.) can break through the limitation of intrinsic activity of SACs. Therefore, this Review first introduces the basic principles of NRR and outlines the key factors affecting ENRR. Then a comprehensive summary is given of the progress of SACs (precious metals, non-precious metals, non-metallic) and diatomic catalysts (DACs) in ENRR. The impact of SACs microenvironmental regulation on ENRR is highlighted. Finally, further research directions for SACs in ENRR are discussed.

Photocatalytic Enhancement Strategy with the Introduction of Metallic Bi: A Review on Bi/Semiconductor Photocatalysts

Semiconductor photocatalysis has great potential in the fields of solar fuel production and environmental remediation. Nevertheless, the photocatalytic efficiency still constrains its practical production applications. The development of new semiconductor materials is essential to enhance the solar energy conversion efficiency of photocatalytic systems. Recently, the research on enhancing the photocatalytic performance of semiconductors by introducing bismuth (Bi) has attracted widespread attention. In this review, we briefly overview the main synthesis methods of Bi/semiconductor photocatalysts and summarize the control of the micromorphology of Bi in Bi/semiconductors and the key role of Bi in the catalytic system. In addition, the promising applications of Bi/semiconductors in photocatalysis, such as pollutant degradation, sterilization, water separation, CO2 reduction, and N2 fixation, are outlined. Finally, an outlook on the challenges and future research directions of Bi/semiconductor photocatalysts is given. We aim to offer guidance for the rational design and synthesis of high-efficiency Bi/semiconductor photocatalysts for energy and environmental applications.

Engineering 0D/2D Architecture of Ni(OH)2 Nanoparticles on Covalent Organic Framework Nanosheets for Selective Visible-Light-Driven CO2 Reduction

Low-dimensional materials serving as photocatalysts favor providing abundant unsaturated active sites and shortening the charge transport distance, but the high surface energy readily causes the aggregation that limits their application. Herein, it is demonstrated that 2D covalent organic framework (COF) TpBD nanosheets are effective in the dispersion and stabilization of 0D Ni(OH)2 . The COF precursor TpBD is synthesized from the Schiff base condensation of 1,3,5-triformylphloroglucinol (Tp) and benzidine (BD) and exfoliated into 2D nanosheets named BDNs via ultrasonication. The formation of highly dispersive 0D Ni(OH)2 on BDNs is reached under a mild weak basic condition, enabling robust active sites for CO2 adsorption/activation and rapid interface cascaded electron transport channels for the accumulation of long-lived photo-generated charges. The champion catalyst 30%Ni-BDNs effectively catalyze the CO2 to CO conversion under visible-light irradiation, offering a high CO evolution rate of 158.4 mmol g-1 h-1 and turnover frequency of 51 h-1 . By contrast, the counterpart photocatalyst, the bulk TpBD stabilized Ni(OH)2 , affords a much lower CO evolution rate and selectivity. This work demonstrates a new avenue to simultaneously construct efficient active sites and electron transport channels by coupling 0D metal hydroxides and 2D COF nanosheets for CO2 photoreduction.

Fluorinated photoreduced graphene oxide with semi-ionic C-F bonds: An effective carbon based photocatalyst for the removal of volatile organic compounds

There is much interest in developing metal-free halogenated graphene such as fluorinated graphene for various catalytic applications. In this work, a fluorine-doped graphene oxide photocatalyst was investigated for photocatalytic oxidation (PCO) of a volatile organic compound (VOC), namely gaseous methanol. The fluorination process of graphene oxide (GO) was carried out via a novel and facile solution-based photoirradiation method. The fluorine atoms were doped on the surface of the GO in a semi-ionic C-F bond configuration. This presence of the semi-ionic C-F bonds induced a dramatic 7-fold increment of the hole charge carrier density of the photocatalyst. The fluorinated GO photocatalyst exhibited excellent photodegradation up to 93.5% or 0.493 h-1 according pseudo-first order kinetics for methanol. In addition, 91.7% of methanol was mineralized into harmless carbon dioxide (CO2) under UV-A irradiation. Furthermore, the photocatalyst demonstrated good stability in five cycles of methanol PCO. Besides methanol, other VOCs such as acetone and formaldehyde were also photodegraded. This work reveals the potential of fluorination in producing effective graphene-based photocatalyst for VOC removal.

Bio-Inspired Supramolecular Self-Assembled Carbon Nitride Nanostructures for Photocatalytic Water Splitting

Fast production of hydrogen and oxygen in large amounts at an economic rate is the need of the hour to cater to the needs of the most awaited hydrogen energy, a futuristic renewable energy solution. Production of hydrogen through simple water splitting via visible light photocatalytic approach using sunlight is considered as one of the most promising and sustainable approaches for generating clean fuels. For this purpose, a variety of catalytic techniques and novel catalysts have been investigated. Among these catalysts, carbon nitride is presently deemed as one of the best candidates for the visible light photocatalysis due to its unique molecular structure and adequate visible-range bandgap. Its bandgap can be further engineered by structural and morphological manipulation or by doping/hybridization. Among numerous synthetic approaches for carbon nitrides, supramolecular self-assembly is one of the recently developed elegant bottom-up strategies as it is bio-inspired and provides a facile and eco-friendly route to synthesize high surface area carbon nitride with superior morphological features and other semiconducting and catalytic properties. The current review article broadly covers supramolecular self-assembly synthesis of carbon nitride nanostructures and their photocatalytic water-splitting applications and provides a comprehensive outlook on future directions.

Carbon nitride quantum dots-modified cobalt phosphate for enhanced photocatalytic H2 evolution

In the present work, carbon nitride quantum dots (CNQDs)-modified cobalt phosphate (CoPi) composites CNQDs/CoPi-x (x = 1, 2, 3) were prepared at room temperature and characterized by FTIR, XRD, UV-Vis DRS, EIS, SEM, TEM/HR-TEM, XPS, and N2 gas adsorption. The morphologies and surface areas of CNQDs/CoPi-x have no remarkable change after modification of CNQDs, compared with pure CoPi. The obtained CNQDs/CoPi-x shows enhanced activity and stability of photocatalytic H2 evolution compared to pure CoPi using Eosin Y (EY) as a sensitizer and triethanolamine as an electron donor. The CNQDs/CoPi-2 possesses the highest hydrogen evolution rate, 234.5 μmol h-1  g-1 , upon visible light, which outshines that of CoPi by 2.4 times. It was believed that the enhanced photocatalytic performances of the CNQDs/CoPi-2 could result from the boosted electron transfer from radical EY·- to CNQDs/CoPi-2 by the employment of CNQDs; in addition, the visible-light activity of CNQDs contributes to hydrogen evolution. The mechanism of photocatalytic hydrogen production was discussed. This study may contribute toward the development of production of "green hydrogen" using solar.

Key Strategies for Enhancing H2 Production in Transition Metal Oxide Based Photocatalysts

Transition metal oxides (TMOs) were one of the first photocatalysts used to produce hydrogen from water using solar energy. Despite the emergence of many other genres of photocatalysts over the years, TMO photocatalysts remain dominant due to their easy synthesis and unique physicochemical properties. Various strategies have been developed to enhance the photocatalytic activity of TMOs, but the solar-to-hydrogen (STH) conversion efficiency of TMO photocatalysts is still very low (<2 %), which is far below the targeted STH of 10 % for commercial viability. This article provides a comprehensive analysis of several widely used strategies, including oxygen defects control, doping, establishing interfacial junctions, and phase-facet-morphology engineering, that have been adopted to improve TMO photocatalysts. By critically evaluating these strategies and providing a roadmap for future research directions, this article serves as a valuable resource for researchers, students, and professionals seeking to develop efficient energy materials for green energy solutions.

Self-assembly synthesis of hollow phosphorus-doped graphitic carbon nitride microboxes for the photodegradation of organic pollutants

The rational design of photocatalysts with efficiency and stability is highly desirable but remains challenging. Here, we report a supramolecular self-assembly strategy to construct hollow phosphorus-doped g-C3N4 microboxes (PCNMs). Considering the effects of multiple parameters on the structure and activity of samples, the orthogonal design is innovatively introduced to optimize technology parameters for screening high-performance g-C3N4. Under visible light irradiation (λ ≥ 420 nm), rhodamine B (RhB, 4 mg L-1) is completely degraded in just 80 seconds in the presence of the optimal PCNM. The kinetic rate constant of RhB degradation with the PCNM is 3.4633 min-1, demonstrating unprecedented activity that is about 112 times higher than that of bulk g-C3N4 (0.0309 min-1) synthesized by direct polycondensation of melamine. Additionally, the optimal PCNM also shows enhanced degradation efficiency for tetracycline. The outstanding properties are primarily attributed to the hollow architecture, high specific surface area, and phosphorus doping. This work advances the design of photocatalysts correlating various factors, opening an avenue for optimizing photocatalytic synthesis and activity.

Novel organically linked ZnII hydrogenselenite coordination polymers: synthesis, characterization, and efficient TiO2 photosensitization for enhanced photocatalytic hydrogen production

This study focused on the solvothermal synthesis, characterization, and photocatalytic activities of two novel coordination polymers, namely [Zn(μ-HSeO3)2(bipy)]n (1) and [Zn(μ-HSeO3)2(phen)]n (2). These compounds represent the first organically linked ZnII hydrogenselenite coordination polymers. The synthesis of compounds 1 and 2 involved the addition of 2,2'-bipyridine and 1,10-phenanthroline, respectively, to SeO2 and ZnO in methanol as the solvent. The novel hydrogenselenite compounds were thoroughly characterized using spectroscopic and crystallographic methods. The photocatalytic solids (TiO2-1A and TiO2-2A) were prepared by immobilizing compounds 1-2 onto TiO2 through the sol-gel approach. These photocatalysts were then evaluated for hydrogen evolution via water splitting using a 300 W Hg/Xe lamp as the irradiation source. Among the newly synthesized photocatalytic materials, TiO2-1A demonstrated auspicious photocatalytic performance for hydrogen gas production. Its catalytic activity overcame the observed for the pure solid support TiO2 and Degussa P25 (commercial titania), making compound 1 a particularly attractive TiO2 photosensitizer. Additionally, TiO2-1A exhibited superior photocatalytic activity compared to TiO2-2A. The latter performed better than freshly prepared TiO2, approaching that of Degussa P25. These findings highlight the potential of compound 1 as an effective photosensitizer for TiO2-based photocatalysis, making it a promising candidate for applications in clean energy generation, specifically in hydrogen production by water splitting.

Recent Progress on Phase Engineering of Nanomaterials

As a key structural parameter, phase depicts the arrangement of atoms in materials. Normally, a nanomaterial exists in its thermodynamically stable crystal phase. With the development of nanotechnology, nanomaterials with unconventional crystal phases, which rarely exist in their bulk counterparts, or amorphous phase have been prepared using carefully controlled reaction conditions. Together these methods are beginning to enable phase engineering of nanomaterials (PEN), i.e., the synthesis of nanomaterials with unconventional phases and the transformation between different phases, to obtain desired properties and functions. This Review summarizes the research progress in the field of PEN. First, we present representative strategies for the direct synthesis of unconventional phases and modulation of phase transformation in diverse kinds of nanomaterials. We cover the synthesis of nanomaterials ranging from metal nanostructures such as Au, Ag, Cu, Pd, and Ru, and their alloys; metal oxides, borides, and carbides; to transition metal dichalcogenides (TMDs) and 2D layered materials. We review synthesis and growth methods ranging from wet-chemical reduction and seed-mediated epitaxial growth to chemical vapor deposition (CVD), high pressure phase transformation, and electron and ion-beam irradiation. After that, we summarize the significant influence of phase on the various properties of unconventional-phase nanomaterials. We also discuss the potential applications of the developed unconventional-phase nanomaterials in different areas including catalysis, electrochemical energy storage (batteries and supercapacitors), solar cells, optoelectronics, and sensing. Finally, we discuss existing challenges and future research directions in PEN.

Nontypical Wulff-Shape Silicon Nanosheets with High Catalytic Activity

Nanostructured silicon with an equilibrium shape has exhibited hydrogen evolution reaction activity mainly owing to its high surface area, which is distinct from that of bulk silicon. Such a Wulff shape of silicon favors low-surface-energy planes, resulting in silicon being an anisotropic and predictably faceted solid in which certain planes are favored, but this limits further improvement of the catalytic activity. Here, we introduce nanoporous silicon nanosheets that possess high-surface-energy crystal planes, leading to an unconventional Wulff shape that bolsters the catalytic activity. The high-index plane, uncommonly seen in the Wulff shape of bulk Si, has a band structure optimally aligned with the redox potential necessary for hydrogen generation, resulting in an apparent quantum yield (AQY) of 12.1% at a 400 nm wavelength. The enhanced light absorption in nanoporous silicon nanosheets also contributes to the high photocatalytic activity. Collectively, the strategy of making crystals with nontypical Wulff shapes can provide a route toward various classes of photocatalysts for hydrogen production.

Transforming the Petroleum Industry through Catalytic Oxidation Reactions vis-à-vis Preceramic Polymer Catalyst Supports

Preceramic polymers, for instance, are used in a variety of chemical processing industries and applications. In this contribution, we report on the catalytic oxidation reactions generated using preceramic polymer catalyst supports. Also, we report the full knowledge of the use of the remarkable catalytic oxidation, and the excellent structures of these preceramic polymer catalyst supports are revealed. This finding, on the other hand, focuses on the functionality and efficacy of future applications of catalytic oxidation of preceramic polymer nanocrystals for energy and environmental treatment. The aim is to design future implementations that can address potential environmental impacts associated with fuel production, particularly in downstream petroleum industry processes. As a result, these materials are being considered as viable candidates for environmentally friendly applications such as refined fuel production and related environmental treatment.

Fabrication of multiphase MoSe2 modified BiOCl nanosheets for efficient piezo-photoelectric hydrogen evolution and antibiotic degradation

Efficient spatial charge separation plays a crucial role in improving the photocatalytic performance. Therefore, 1T/2H MoSe2/BiOCl (1T/2H MS/BOC) and 2H MoSe2/BiOCl (2H MS/BOC) piezo-photocatalysts are synthesized. By combining piezoelectric catalysis and photocatalysis, a highly active piezo-photocatalytic process is realized. The optimal 1T/2H MS/BOC piezo-photocatalyst displays superior diclofenac (DCF) degradation and hydrogen (H2) evolution activity under the combined action of ultrasound and light. In particular, the DCF degradation kinetic constant (k) of optimal 0.5% 1T/2H MS/BOC under the synergistic effect of ultrasound and light is 0.057 min-1, which is 8.1 and 6.3 times higher than those of BiOCl (0.007 min-1) and 0.5% 2H MS/BOC (0.009 min-1). Moreover, the H2 evolution rate of 0.5% 1T/2H MS/BOC is 122.5 μmol g-1 h-1, which is also higher than those of BiOCl (45.8 μmol g-1 h-1) and 2H MS/BOC (49.5 μmol g-1 h-1). The dramatic improvement in the DCF degradation and H2 evolution piezo-photocatalytic performance of 1T/2H MS/BOC catalysts is ascribed to the built-in polarization electric field and abundance of active sites of 1T/2H MS/BOC as well as the advantageous band structure between BiOCl and 1T/2H MoSe2. Additionally, three probable degradation pathways of DCF were put forward from the results of liquid chromatography-mass spectrometry (LCMS) and density functional theory (DFT) calculations. This study provides the design strategy of high efficiency piezo-photocatalysts in environmental purification and energy-generation fields based on phase and band structure engineering.

Controlled Ni doping on a g-C3N4/CuWO4 photocatalyst for improved hydrogen evolution

The development of a low-cost, environment-friendly and suitable semiconductor-based heterogeneous photocatalyst poses a great challenge towards extremely competent and substantial hydrogen evolution. A series of environment-friendly and proficient S-scheme Ni-doped CuWO4 nanocrystals supported on g-C3N4 nanocomposites (Ni-CuWO4/g-C3N4) were constructed to ameliorate the photocatalytic efficacy of pure g-C3N4 and Ni-CuWO4 and their activity in H2 generation through photocatalytic water splitting was evaluated. The Ni-CuWO4 nanoparticles were synthesized through doping of Ni2+ on wolframite CuWO4 crystals via the chemical precipitation method. An elevated hydrogen generation rate of 1980 μmol h-1 g-1 was accomplished over the 0.2Ni-CuWO4/g-C3N4 (0.2NCWCN) nanocomposite with an apparent quantum yield (AQY) of 6.49% upon visible light illumination (λ ≥ 420 nm), which is evidently 7.1 and 17.2 fold higher than those produced from pristine g-C3N4 and Ni-CuWO4. The substantial enhancement in the photocatalytic behaviour is primarily because of the large surface area, limited band gap energy of the semiconductor composite and magnified light harvesting capability towards visible light through the inclusion of g-C3N4, thus diminishing the reassembly rate of photoinduced excitons. Further, density functional theory (DFT) calculations were performed to investigate the structural, electronic and optical properties of the composite. Theoretical results confirmed that the Ni-CuWO4/g-C3N4 composite is a potential candidate for visible-light-driven photocatalysts and corroborated with the experimental findings. This research provides a meaningful and appealing perspective on developing cost-effective and very proficient two-dimensional (2D) g-C3N4-based materials for photocatalytic H2 production to accelerate the separation and transmission process of radiative charge carriers.

Boosting Electro- and Photo-Catalytic Activities in Atomically Thin Nanomaterials by Heterointerface Engineering

Since the discovery of graphene, two-dimensional ultrathin nanomaterials with an atomic thickness (typically <5 nm) have attracted tremendous interest due to their fascinating chemical and physical properties. These ultrathin nanomaterials, referred to as atomically thin materials (ATMs), possess inherent advantages such as a high specific area, highly exposed surface-active sites, efficient atom utilization, and unique electronic structures. While substantial efforts have been devoted to advancing ATMs through structural chemistry, the potential of heterointerface engineering to enhance their properties has not yet been fully recognized. Indeed, the introduction of bi- or multi-components to construct a heterointerface has emerged as a crucial strategy to overcome the limitations in property enhancement during ATM design. In this review, we aim to summarize the design principles of heterointerfacial ATMs, present general strategies for manipulating their interfacial structure and catalytic properties, and provide an overview of their application in energy conversion and storage, including the hydrogen evolution reaction (HER), the oxygen evolution reaction (OER), the oxygen reduction reaction (ORR), the CO2 electroreduction reaction (CO2RR), photocatalysis, and rechargeable batteries. The central theme of this review is to establish correlations among interfacial modulation, structural and electronic properties, and ATMs' major applications. Finally, based on the current research progress, we propose future directions that remain unexplored in interfacial ATMs for enhancing their properties and introducing novel functionalities in practical applications.

Recent Advances in the Use of Covalent Organic Frameworks as Heterogenous Photocatalysts in Organic Synthesis

Organic photochemistry is intensely developed in the 1980s, in which the nature of excited electronic states and the energy and electron transfer processes are thoroughly studied and finally well-understood. This knowledge from molecular organic photochemistry can be transferred to the design of covalent organic frameworks (COFs) as active visible-light photocatalysts. COFs constitute a new class of crystalline porous materials with substantial application potentials. Featured with outstanding structural tunability, large porosity, high surface area, excellent stability, and unique photoelectronic properties, COFs are studied as potential candidates in various research areas (e.g., photocatalysis). This review aims to provide the state-of-the-art insights into the design of COF photocatalysts (pristine, functionalized, and hybrid COFs) for organic transformations. The catalytic reaction mechanism of COF-based photocatalysts and the influence of dimensionality and crystallinity on heterogenous photocatalysis performance are also discussed, followed by perspectives and prospects on the main challenges and opportunities in future research of COFs and COF-based photocatalysts.

3D Lanthanide Neodymium Porphyrin Metal-Organic Framework for Photocatalytic Oxidation of Styrene

A novel three-dimensional lanthanide porphyrin-based MOF (Nd-PMOFs) was synthesized by using tetracarboxyphenyl porphyrin as the ligand and the lanthanide Nd as the coordination metal. Its specific crystal structure information was obtained by single-crystal diffraction with the space group C2/c and the empirical formula C₇₂H₄₅N₆Nd₂O_15.25. This new Nd porphyrin-based MOF with an organic framework formed by a unique coordination method enables the effective separation of photogenerated electrons and holes under photoluminescence, giving it excellent photocatalytic property which could be verified by the characterization data. The photocatalytic performance was examined by taking tert-butyl hydroperoxide as the oxidant and Nd-PMOFs as the catalyst for photocatalytic oxidation of styrene to benzaldehyde with 91.4% conversion and 81.2% benzaldehyde selectivity under optimal reactions, which surpasses most of the results reported in the literature. Several styrenes with other substituents were screened to explore the general applicability of Nd-PMOF for photocatalysis of styrene, among which Nd-PMOFs also exhibited excellent photocatalytic performance. This work offers the possibility to apply lanthanide organometallic frameworks, which are widely used in fluorescent materials, to photocatalysis. In addition, it also provides a new method for the catalytic generation of benzaldehyde from styrene that is consistent with the needs of modern green development.

V-doped Ni2P nanoparticle grafted g-C3N4 nanosheets for enhanced photocatalytic hydrogen evolution performance under visible light

Exploring low-cost and highly active photocatalysts with noble metal-free cocatalysts is of great significance for photocatalytic hydrogen evolution under simulated sunlight irradiation. In this work, a novel V-doped Ni₂P nanoparticle loaded g-C₃N₄ nanosheet is reported as a highly efficient photocatalyst for H₂ evolution under visible light irradiation. The results demonstrate that the optimized 7.8 wt% V-Ni₂P/g-C₃N₄ photocatalyst exhibits a high hydrogen evolution rate of 271.5 μmol g^-1 h^-1, which is comparable to that of the 1 wt% Pt/g-C₃N₄ photocatalyst (279 μmol g^-1 h^-1), and shows favorable hydrogen evolution stability for five successive runs within 20 h. The remarkable photocatalytic hydrogen evolution performance of V-Ni₂P/g-C₃N₄ is mainly due to the enhanced visible light absorption ability, the facilitated separation of photo-generated electron-hole pairs, the prolonged lifetime of photo-generated carriers and the fast transmission ability of electrons.

Organic Covalent Interaction-based Frameworks as Emerging Catalysts for Environment and Energy Applications: Current Scenario and Opportunities

The term "covalent organic framework" (COF) refers to a class of porous organic polymeric materials made from organic building blocks that have been covalently bonded. The preplanned and predetermined bonding of the monomer linkers allow them to demonstrate directional flexibility in two- or three-dimensional spaces. COFs are modern materials, and the discovery of new synthesis and linking techniques has made it possible to prepare them with a variety of favorable features and use them in a range of applications. Additionally, they can be post-synthetically altered or transformed into other materials of particular interest to produce compounds with enhanced chemical and physical properties. Because of its tunability in different chemical and physical states, post-synthetic modifications, high stability, functionality, high porosity and ordered geometry, COFs are regarded as one of the most promising materials for catalysis and environmental applications. This study highlights the basic advancements in establishing the stable COFs structures and various post-synthetic modification approaches. Further, the photocatalytic applications, such as organic transformations, degradation of emerging pollutants and removal of heavy metals, production of hydrogen and Conversion of carbon dioxide (CO₂ ) to useful products have also been presented. Finally, the future research directions and probable outcomes have also been summarized, by focusing their promises for specialists in a variety of research fields.

Green and Scalable Synthesis of Atomic-Thin Crystalline Two-Dimensional Triazine Polymers with Ultrahigh Photocatalytic Properties

Scalable and eco-friendly synthesis of crystalline two-dimensional (2D) polymers with proper band gap and single-layer thickness is highly desired for the fundamental research and practical applications of 2D polymers; however, it remains a considerable and unresolved challenge. Herein, we report a convenient and robust method to synthesize a series of crystalline covalent triazine framework nanosheets (CTF NSs) with a thickness of ∼80 nm via a new solvent-free salt-catalyzed nitrile cyclotrimerization process, which enables the cost-effective large-scale preparation of crystalline CTF NSs at the hundred-gram level. Theoretical calculations and detailed experiments revealed for the first time that the conventional salts such as KCl can not only act as physical templates as traditionally believed but also more importantly can efficiently catalyze the cyclotrimerization reaction of carbonitrile monomers as a new kind of green solid catalysts to achieve crystalline CTF NSs. Upon simple liquid-phase sonication, these CTF NSs can be easily further exfoliated into abundant single-layer crystalline 2D triazine polymers (2D-TPs) in high yields. The obtained atomically thin crystalline 2D-TPs with a band gap of 2.36 eV and rich triazine active groups exhibited a remarkable photocatalytic hydrogen evolution rate of 1321 μmol h^-1 under visible light irradiation with an apparent quantum yield up to 29.5% at 420 nm and excellent photocatalytic overall water splitting activity with a solar-to-hydrogen efficiency up to 0.35%, which exceed all molecular framework materials and are among the best metal-free photocatalysts ever reported. Moreover, the processable 2D-TPs could be readily assembled on a support as a photocatalytic film device, which demonstrated superior photocatalytic performance (135.2 mmol h^-1 m^-2 for hydrogen evolution).

Efficient photocatalytic hydrogen evolution: Linkage units engineering in triazine-based conjugated porous polymers

Conjugated porous polymers (CPPs) have been widely reported as promising photocatalysts. However, the realization of powerful photocatalytic hydrogen production performance still benefits from the rational design of molecular frameworks and the appropriate choice of building monomers. Herein, we synthesized two novel conjugated porous polymers (CPPs) by copolymerizing pyrene and 1,3,5-triazine building blocks. It is found that minor structural changes in the peripheral groups of the triazine units can greatly affect the photocatalytic activity of the polymers. Compared with the phenyl-linkage unit, the thiophene-linkage unit can give CPP a wider absorption range of visible light, a narrower band gap, a higher transmission and separation efficiency of photo-generated carriers (electrons/holes), and a better interface contact with the photocatalytic reaction solution. The catalyst containing thiophene-triazine (ThPy-CPP) has an efficient photocatalytic hydrogen evolution rate of 21.65 and 16.69 mmol g^-1h^-1 under full-arc spectrum and visible light without the addition of a Pt co-catalyst, respectively, much better than the one containing phenyl-triazine (PhPy-CPP, only 5.73 and 3.48 mmol g^-1h^-1). This study provides a promising direction to design and construct highly efficient, cost-effective CPP-based photocatalysts, for exploring the application of noble metal-free catalysts in photocatalytic hydrogen evolution.

Enhanced photocatalytic hydrogen evolution activity of co-catalyst free S-scheme polymer heterojunctions via ultrasonic assisted reorganization in solvent

In this work, two donor-acceptor linear conjugated polymers were designed and synthesized based on thianthrene-5,5,10,10-tetraoxide (TTO) as the acceptor unit, benzo[1,2-b:4,5-b']dithiophene derivative (Py1) and thiophene (Py2) as the donor units, respectively. The Py1/Py2 composite was prepared by physical ball milling of the two polymers in a mixture, which was further treated with a N-methyl-2-pyrrolidone (NMP)-assisted sonication treatment, and the obtained catalyst was named N-Py1/Py2. Compared with the single polymer or Py1/Py2, the FTIR characteristic peaks of O=S=O have a red shift for N-Py1/Py2, accompanied by a profound change in morphology. Furthermore, N-Py1/Py2 has a broader light response and more efficient separation and transport of charge carriers, and as a result it exhibits a higher photocatalytic hydrogen evolution rate (26.5 mmol g^-1 h^-1) without the involvement of any co-catalyst than Py1/Py2 catalyst (3.56 mmol g^-1 h^-1). The underlying mechanism for the enhanced photocatalytic activity by the sonication treatment in NMP is discussed based both on experimental and theoretical calculation data.

Rational Design of PDI-Based Linear Conjugated Polymers for Highly Effective and Long-Term Photocatalytic Oxygen Evolution

Constructed through relatively weak noncovalent forces, the stability of organic supramolecular materials has shown to be a challenge. Herein, the designing of a linear conjugated polymer is proposed through creating a chain polymer connected via bridging covalent bonds in one direction and retaining π-stacked aromatic columns in its orthogonal direction. Specifically, three analogs of linear conjugated polymers through tuning the aromatic core and its covalently linked moiety (bridging group) within the building block monomer are prepared. Cooperatively supported by strong π-π stacking interactions from the extended aromatic core of perylene and favorable dipole-dipole interactions from the bridging group, the as-expected high crystallinity, wide light absorption, and increased stability are successfully achieved for Oxamide-PDI (perylene diimide) through ordered molecular arrangement, and present a remarkable full-spectrum oxygen evolution rate of 5110.25 µmol g^-1  h^-1 without any cocatalyst. Notably, experimental and theoretical studies reveal that large internal dipole moments within Oxamide-PDI together with its ordered crystalline structure enable a robust built-in electric field for efficient charge carrier migration and separation. Moreover, density functional theory (DFT) calculations also reveal oxidative sites located at carbon atoms next to imide bonds and inner bay positions based on proven spatially separated photogenerated electrons and holes, thus resulting in highly efficient water photolysis into oxygen.

The Directional Crystallization Process of Poly (triazine imide) Single Crystals in Molten Salts

Poly (triazine imide) photocatalysts prepared via molten salt methods emerge as promising polymer semiconductors with one-step excitation capacity of overall water splitting. Unveiling the molecular conjugation, nucleation, and crystallization processes of PTI crystals is crucial for their controllable structure design. Herein, microscopy characterization was conducted at the PTI crystallization front from meso to nano scales. The heptazine-based precursor was found to depolymerize to triazine monomers within molten salts and KCl cubes precipitate as the leading cores that guide the directional stacking of PTI molecular units to form aggregated crystals. Upon this discovery, PTI crystals with improved dispersibility and enhanced photocatalytic performance were obtained by tailoring the crystallization fronts. This study advances insights into the directional assembling of PTI monomers on salt templates, placing a theoretical foundation for the ordered condensation of polymer crystals.

Pyridinium-derived polycationic covalent organic polymers for aromatic C-H bond photocatalytic oxidation

Using oxygen in the air as the sole oxidant to oxidize hydrocarbons into high value-added compounds is a highly promising synthesis strategy with economic advantages. However, the oxidation of hydrocarbons with molecular oxygen under mild conditions is challenging due to the large C-H bond energy in hydrocarbons. Herein, a metal-free two-dimensional covalent organic polymers (COP) functionalized by photoactive pyridinium units has been developed for heterogeneous photocatalytic oxidation of hydrocarbons. This is the first kind of COPs material that can achieve photocatalytic oxidation of hydrocarbons without any additives or stoichiometric oxidants except for the oxygen in the air.

Recent Developments and Perspectives of Cobalt Sulfide-Based Composite Materials in Photocatalysis

Photocatalysis, as an inexpensive and safe technology to convert solar energy, is essential for the efficient utilization of sustainable renewable energy sources. Earth-abundant cobalt sulfide-based composites have generated great interest in the field of solar fuel conversion because of their cheap, diverse structures and facile preparation. Over the past 10 years, the number of reports on cobalt sulfide-based photocatalysts has increased year by year, and more than 500 publications on the application of cobalt sulfide groups in photocatalysis can be found in the last three years. In this review, we initially summarize the four common strategies for preparing cobalt sulfide-based composite materials. Then, the multiple roles of cobalt sulfide-based cocatalysts in photocatalysis have been discussed. After that, we present the latest progress of cobalt sulfide in four fields of photocatalysis application, including photocatalytic hydrogen production, carbon dioxide reduction, nitrogen fixation, and photocatalytic degradation of pollutants. Finally, the development prospects and challenges of cobalt sulfide-based photocatalysts are discussed. This review is expected to provide useful reference for the construction of high-performance cobalt sulfide-based composite photocatalytic materials for sustainable solar-chemical energy conversion.

Band Edges Engineering of 2D/2D Heterostructures: The C3 N4 /Phosphorene Interface

We investigate the interface between carbon nitride (C₃ N₄ ) and phosphorene nanosheets (P-ene) by means of Density Functional Theory (DFT) calculations. C₃ N₄ /P-ene composites have been recently obtained experimentally showing excellent photoactivity. Our results indicate that the formation of the interface is a favorable process driven by Van der Waals forces. The thickness of P-ene nanosheets determines the band edges offsets and the charge carriers' separation. The system is predicted to pass from a nearly type-II to a type-I junction when the thickness of P-ene increases, and the conduction band offset is particularly sensitive. Last, we apply the Transfer Matrix Method to estimate the efficiency for charge carriers' migration as a function of the P-ene thickness.