Acid-activated α-MnO2 for photothermal co-catalytic oxidative degradation of propane: Activity and reaction mechanism

In order to further reduce the energy consumption of the conventional thermal catalytic oxidation system and improve the degradation efficiency of pollutants, photothermal synergistic catalytic oxidation (PTSCO) system was constructed in this paper with propane as simulated pollutant representing VOCs, and then the modified α-MnO2 catalysts were prepared by using the acid activation method, which were used for the catalytic oxidation of propane in PTSCO. The α-MnO2 with appropriate acid concentration possessed excellent low-temperature reducibility, abundant active oxygen species, fast oxygen migration rate and a large number of acid sites. The optimal catalyst, H0.05-MnO2, had a T90 of 204 °C in the PTSCO system, which reduced by more than 30 °C relative to the α-MnO2 (T90 of 235 °C). Moreover, H0.05-MnO2 demonstrated excellent water resistance and long-term stability (T = 45 h). It was shown that the combination of photocatalysis and thermocatalysis can improve propane degradation by examining the kinetics of propane degradation in the PTSCO system and the conformational relationship of propane degradation by catalysts. Furthermore, a multi-pathway synergistic mechanism between photocatalysis and thermocatalysis in the PTSCO system was proposed. This work provided a theoretical basis for the preparation of high-performance catalysts and the catalytic degradation of propane.

Transforming Plain LaMnO3 Perovskite into a Powerful Ozonation Catalyst: Elucidating the Mechanisms of Simultaneous A and B Sites Modulation for Enhanced Toluene Degradation

Herein, we propose preferential dissolution paired with Cu-doping as an effective method for synergistically modulating the A- and B-sites of LaMnO3 perovskite. Through Cu-doping into the B-sites of LaMnO3, specifically modifying the B-sites, the double perovskite La2CuMnO6 was created. Subsequently, partial La from the A-sites of La2CuMnO6 was etched using HNO3, forming novel La2CuMnO6/MnO2 (LCMO/MnO2) catalysts. The optimized catalyst, featuring an ideal Mn:Cu ratio of 4.5:1 (LCMO/MnO2-4.5), exhibited exceptional catalytic ozonation performance. It achieved approximately 90% toluene degradation with 56% selectivity toward CO2, even under ambient temperature (35 °C) and a relatively humid environment (45%). Modulation of A-sites induced the elongation of Mn-O bonds and decrease in the coordination number of Mn-O (from 6 to 4.3) in LCMO/MnO2-4.5, resulting in the creation of abundant multivalent Mn and oxygen vacancies. Doping Cu into B-sites led to the preferential chemisorption of toluene on multivalent Cu (Cu(I)/Cu(II)), consistent with theoretical predictions. Effective electronic supplementary interactions enabled the cycling of multiple oxidation states of Mn for ozone decomposition, facilitating the production of reactive oxygen species and the regeneration of oxygen vacancies. This study establishes high-performance perovskites for the synergistic regulation of O3 and toluene, contributing to cleaner and safer industrial activities.

Space-confined manganese oxides nanosheets for efficient catalytic decomposition of ozone

Ground-level ozone has long posed a substantial menace to human well-being and the ecological milieu. The widely reported manganese-based catalysts for ozone decomposition still facing the persisting issues encompass inefficiency and instability. To surmount these challenges, we developed a mesoporous silica thin films with perpendicular nanochannels (SBA(⊥)) confined Mn3O4 catalyst (Mn3O4@SBA(⊥)). Under a weight hourly space velocity (WHSV) of 500,000 mL g-1 h-1, the Mn3O4@SBA(⊥) catalyst exhibited 100% ozone decomposition efficiency in 5 h and stability across a wide humidity range, which exceed the performance of bulk Mn3O4 and Mn3O4 confine in commonly reported SBA-15. Rapidly decompose 20 ppm O3 to a safety level below 100 μg m-3 in the presence of dust in smog chamber (60 × 60 × 60 cm) was also realized. This prominent catalytic performance can be attributed to the unique confined structure engenders the highly exposed active sites, facilitate the reactant-active sites contact and impeded the water accumulation on the active sites. This work offers new insights into the design of confined structure catalysts for air purification.

Highly efficient removal of ozone by amorphous manganese oxides synthesized with a simple hydrothermal method

Amorphous manganese oxides (MnOx) were synthesized by facile hydrothermal reactions between potassium permanganate and manganese acetate. Synthesis parameters, including hydrothermal time and temperature and molar ratio of precursors, significantly affected the ozone removal performance and structure property of MnOx. Amorphous MnOx-1.5, which was prepared at the Mn2+/Mn7+ molar ratio of 1.5 under hydrothermal conditions of 120°C and 2 hr, showed the highest ozone removal rate of 93% after 480 min at the room temperature, RH (relative humidity) = 80% and WHSV (weight hourly space velocity) = 600 L/(g·hr). The morphology, composition and structure of catalysts were investigated with X-ray diffractometer (XRD), Raman spectra, N2 physisorption, field emission scanning electron microscope (FESEM), X-ray photoelectron spectroscopy (XPS), H2 temperature-programmed reduction (H2-TPR), O2 temperature-programmed desorption (O2-TPD) and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS). It was confirmed that high catalytic activity of amorphous MnOx for ozone removal was mainly ascribed to its abundant oxygen vacancies, high oxygen mobility and large specific surface area.

Highly efficient ozone elimination by metal doped ultra-fine Cu2O nanoparticles

Nowadays, ozone contamination becomes dominant in air and thus challenges the research and development of cost-effective catalyst. In this study, metal doped Cu2O catalysts are synthesized via reduction of Cu2+ by ascorbic acid in base solutions containing doping metal ions. The results show that compared with pure Cu2O, the Mg2+ and Fe2+ dopants enhance the O3 removal efficiency while Ni2+ depresses the activity. In specific, Mg-Cu2O shows high O3 removal efficiency of 88.4% in harsh environment of 600,000 mL/(g·hr) space velocity and 1500 ppmV O3, which is one of the highest in the literature. Photoluminescence and electron paramagnetic spectroscopy characterization shows higher concentration of crystal defects induced by the Mg2+ dopants, favoring the O3 degradation. The in-situ diffuse reflectance Fourier transform infrared spectroscopy shows the intermediate species in the O3 degradation process change from O22- dominant of pure Cu2O to O2- dominant of Mg-Cu2O, which would contribute to the high activity. All these results show the promising prospect of the Mg-Cu2O for highly efficiency O3 removal.

Cerium-modified amorphous manganese oxides for efficient catalytic removal of ozone

Manganese-based catalysts were widely developed for catalytic removal of ozone, and the low stability and water inactivation are major challenges. To improve removal performance of ozone, three methods were applied to modify amorphous manganese oxides, including acidification, calcination and Ce modification. The physiochemical properties of prepared samples were characterized, and the catalytic activity for ozone removal was evaluated. All modification methods can promote the removal of ozone by amorphous manganese oxides, and Ce modification showed the most significant enhancement. It was confirmed that the introduction of Ce markedly changed the amount and property of oxygen vacancies in amorphous manganese oxides. Superior catalytic activity of Ce-MnO_x can be ascribed to its more content and enhanced formation ability of oxygen vacancies, larger specific surface area and higher oxygen mobility. Furthermore, the durability tests under high relative humidity (80%) determined that Ce-MnO_x showed excellent stability and water resistance. These demonstrate the promising potential of amorphously Ce-modified manganese oxides for catalytic removal of ozone.

Cu Species-Modified OMS-2 Materials for Enhancing Ozone Catalytic Decomposition under Humid Conditions

Manganese oxide octahedral molecular sieves (OMS-2) exhibit an excellent performance in ozone catalytic decomposition in dry atmosphere conditions, which however is severely limited by deactivation in humid conditions. Herein, it was found that the OMS-2 materials modified with Cu species could obviously improve both the ozone decomposition activity and water resistance. Based on the characterization results, it was found that these CuO_x/OMS-2 catalysts exhibited dispersed CuO_x nanosheets attached and located at the external surface accompanied with ionic Cu species entering the MnO₆ octahedral framework of OMS-2. In addition, it was demonstrated that the main reason for the promotion of ozone catalytic decomposition could be ascribed to the combined effect of different Cu species in these catalysts. On the one hand, ionic Cu entered the MnO₆ octahedral framework of OMS-2 near the catalyst surface and substituted ionic Mn species, resulting in an enhanced mobility of surface oxygen species and formation of more oxygen vacancies, which act as the active sites for ozone decomposition. On the other hand, the CuO_x nanosheets could serve as non-oxygen vacancy sites for H₂O adsorption, which could alleviate the catalyst deactivation to some extent caused by the occupancy of H₂O on surface oxygen vacancies. Finally, different reaction pathways for ozone catalytic decomposition over OMS-2 and CuO_x/OMS-2 under humid conditions were proposed. The findings in this work may shed new light on the design of highly efficient catalysts for ozone decomposition with improved water resistance.

Peroxymonosulfate activation with an α-MnO2/Mn2O3/Mn3O4 hybrid system: parametric optimization and oxidative degradation of organic dye

The present study proposed the synthesis of low-toxicity and eco-friendly spherically shaped manganese oxides (α-MnO₂, Mn₂O₃, and Mn₃O₄) by using the chemical precipitation method. The unique variable oxidation states and different structural diversity of manganese-based materials have a strong effect on fast electron transfer reactions. XRD, SEM, and BET analyses were used to confirm the structure morphology, higher surface area, and excellent porosity. The catalytic activity of as-prepared manganese oxides (MnO_x) was investigated for the rhodamine B (RhB) organic pollutant with peroxymonosulfate (PMS) activation under the condition of control pH. In acidic conditions (pH = 3), complete RhB degradation and 90% total organic carbon (TOC) reduction were attained in 60 min. The effects of operating parameters such as solution pH, PMS loading, catalyst dosage, and dye concentration on RhB removal reduction were also tested. The different oxidation states of MnO_x promote the oxidative-reductive reaction under acidic conditions and enhance the SO₄^•-/^•OH radical formation during the treatment, whereas the higher surface area offers sufficient absorption sites for interaction of the catalyst with pollutants. A scavenger experiment was used to investigate the generation of more reactive species that participate in dye degradation. The effect of inorganic anions on divalent metal ions that genuinely occur in water bodies was also studied. Additionally, separation and mass analysis were used to investigate the RhB dye degradation mechanism at optimum conditions based on the intermediate's identification. Repeatability tests confirmed that MnO_x showed superb catalytic performance on its removal trend.

Coordination-Controlled Catalytic Activity of Cobalt Oxides for Ozone Decomposition

Nowadays, it is still elusive and challenging to discover the active sites of cobalt (Co) cations in different coordination structures, though Co-based oxides show their great potency in catalytic ozone elimination for air cleaning. Herein, different Co-based oxides are controllably synthesized including hexagonal wurtzite CoO-W with Co²⁺ in tetrahedral coordination (Co_Td²⁺) and CoAl spinel with dominant Co_Td²⁺, cubic rock salt CoO-R with Co²⁺ in octahedral coordination (Co_Oh²⁺), MgCo spinel with dominant Co³⁺ in octahedral coordination (Co_Oh³⁺), and Co₃O₄ with mixed Co_Td²⁺ and Co_Oh³⁺. The valences are proved by X-ray photoelectron spectroscopy, and the coordinations are verified by X-ray absorption fine structure analysis. The ozone decomposition performances are Co_Oh³⁺ ∼ Co_Oh²⁺ ≫ Co_Td²⁺, and Co_Oh³⁺ and Co_Oh²⁺ show a lower apparent activation energy of ∼42-44 kJ/mol than Co_Td²⁺ (∼55 kJ/mol). In specific, MgCo shows the highest decomposition efficiency of 95% toward 100 ppm ozone at a high space velocity of 1,200,000 mL/gh, which still retains at 80% after a long-term running of 36 h at room temperature. The high activity is explained by the d-orbital splitting in the octahedral coordination, favoring the electron transfer in ozone decomposition reactions, which is also verified by the simulation. These results show the promising prospect of the coordination tuning of Co-based oxides for highly active ozone decomposition catalysts.

α-Fe2O3-supported Co3O4 nanoparticles to construct highly active interfacial oxygen vacancies for ozone decomposition

Ozone pollution has become one of the most concerned environmental issue. Developing low-cost and efficient catalysts is a promising alternative for ozone decomposition. This work presents a creative strategy that using α-Fe₂O₃-supported Co₃O₄ nanoparticles for constructing interfacial oxygen vacancies (Vo) to remove ozone. The efficiency of Co₃O₄/α-Fe₂O₃ was superior to that of pure α-Fe₂O₃ by nearly two times for 200-ppm ozone removal after 6-h reaction at 25 °C, which is ascribed to the highly active interfacial Vo. X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy suggest that the Fe³⁺-Vo-Co²⁺ was formed when Co₃O₄ was loaded in α-Fe₂O₃. Furthermore, the density functional theory (DFT) calculations reveal the desorption and electron transfer ability of intermediate peroxide (O₂^2-) on Fe³⁺-Vo-Co²⁺ are higher than the Vo from other regions. In situ diffuse reflectance Fourier transform (DRIFT) spectroscopy also demonstrate the higher conversion rate of O₂^2- on Co₃O₄/α-Fe₂O₃. Base on the intermediates detected, we propose a recycle mechanism of interfacial Vo for ozone removal: O₂^2- is quickly converted to O₂^- and transformed into O₂ on interfacial Vo. Moreover, O₂-temperature-programmed desorption (TPD), H₂-temperature-programmed reduction (TPR), and electrochemical impedance spectroscopy (EIS) reveal that the oxygen mobility, reducibility, and conductivity of Co₃O₄/α-Fe₂O₃ are greatly superior to those of α-Fe₂O₃, which is contributed to the conversion of O₂^2-. Consequently, our proposed strategy effectively enhances the activity and stability of the bimetallic transition oxides for ozone decomposition.

In Situ Construction of Manganese Oxide Photothermocatalysts for the Deep Removal of Toluene by Highly Utilizing Sunlight Energy

The alternative use of electric energy by renewable energy to supply power for catalytic oxidation of pollutants is a sustainable technology, requiring a competent catalyst to realize efficient utilization of light and drive the catalytic reaction. Herein, in situ-synthesized manganese oxide heterostructure composites are developed through solvothermal reduction and subsequent calcination of amorphous manganese oxide (AMO). 95% of toluene conversion and 80% of CO₂ mineralization were achieved over amorphous manganese oxide calcined at 250 °C (AMO-250) under light irradiation, and catalyst stability was maintained for at least 40 h. Highly utilization of light energy, uniformly dispersed nanoparticles, large specific surface area, improved metal reducibility, and oxygen desorption and migration ability at low temperature contribute to the good catalytic oxidation activity of AMO-250. Light activated more lattice oxygen to participate in the reaction via the Mars-van Krevelen (MvK) mechanism, and traditional e^--h⁺ photocatalytic behavior exists over the AMO-250 heterostructure composite as an auxiliary degradation path. The reaction pathways of photothermocatalysis and thermocatalysis are close, except for the emergence of different copolymers, where light enhances the deep conversion of intermediates. A proof-of-concept study under natural sunlight has confirmed the feasibility of practical application in the photothermocatalytic degradation of pollutants.

Mesoporous poorly crystalline α-Fe2O3 with abundant oxygen vacancies and acid sites for ozone decomposition

In this work, mesoporous poorly crystalline hematite (α-Fe₂O₃) was prepared using mesoporous silica (KIT-6) functionalized with 3-[(2-aminoethyl)amino]propyltrimethoxysilane as a hard template (SMPC-α-Fe₂O₃). The disordered atomic arrangement structure of SMPC-α-Fe₂O₃ promoted the formation of oxygen vacancies, which was confirmed using X-ray photoelectron spectroscopy (XPS), O₂-temperature-programmed desorption (TPD), H₂-temperature-programmed reduction (TPR), and in situ diffuse reflectance infrared Fourier transform (DRIFT) analyses. Density functional theory calculations (DFT) also proved that reducing the crystallinity of α-Fe₂O₃ decreased the formation energy of oxygen vacancies. TPD and in situ DRIFT analyses of NH₃ adsorption suggested that the surface acidity of SMPC-α-Fe₂O₃ was considerably higher than those of mesoporous poorly crystalline α-Fe₂O₃ (MPC-α-Fe₂O₃) and highly crystalline α-Fe₂O₃ (HC-α-Fe₂O₃). The oxygen vacancies and acid sites formed on α-Fe₂O₃ surface are beneficial for ozone (O₃) decomposition. Compared with MPC-α-Fe₂O₃ and HC-α-Fe₂O₃, SMPC-α-Fe₂O₃ exhibited a higher removal efficiency for 200-ppm O₃ at a space velocity of 720 L g^-1 h^-1 at 25 ± 2 °C under dry conditions. Additionally, in situ DRIFT and XPS results suggested that the accumulation of peroxide (O₂^2-) and the conversion of O₂^2- to lattice oxygen over the oxygen vacancies caused catalyst deactivation. However, O₂^2- could be desorbed completely by continuous N₂ purging at approximately 350 °C. This study provides significant insights for developing highly active α-Fe₂O₃ catalysts for O₃ decomposition.

Catalytic ozonation of VOCs at low temperature: A comprehensive review

VOCs abatement has attracted increasing interest because of the detrimental effects on both atmospheric environment and human beings of VOCs. The assistance of ozone has enabled efficient VOCs removal at low temperature. Thereby, catalytic ozonation is considered as one of the most feasible and effective methods for VOCs elimination. This work systematically reviews the emerging advances of catalytic ozonation of different VOCs (i.e., aromatic hydrocarbons, oxygenated VOCs, chlorinated VOCs, sulfur-containing VOCs, and saturated alkanes) over various functional catalysts. General reaction mechanism of catalytic ozonation including both Langmuir-Hinshelwood and Mars-van-Krevelen mechanisms was proposed depending on the reactive oxygen species involving the reactions. The influence of reaction conditions (water vapor and temperature) is fully discussed. This review also introduces the enhanced VOCs oxidation via catalytic ozonation in the ozone-generating systems including plasma and vacuum ultraviolet. Lastly, the existing challenges of VOCs catalytic ozonation are presented, and the perspective of this technology is envisioned.

Pt/MnOx for toluene mineralization via ozonation catalysis at low temperature: SMSI optimization of surface oxygen species

The problem of deep oxidation of low concentrations of VOCs in industrial tail gas is exceptionally urgent. The preparation of VOCs ozonation catalyst with a high mineralization rate is still a challenge. In this paper, manganese oxide carriers with different morphologies were synthesized by simple methods and used to catalyze ozone mineralization of toluene after loading Pt nanoparticles efficiently. The conversion of toluene over Pt/MnO_x-T catalyst was more than 98 % at ambient temperature, and the mineralization rate of toluene was close to 100 % at 70 °C. Through a variety of characterization methods, the strong metal-support interaction (SMSI) between Pt nanoparticles and carriers was successfully constructed. It was found that SMSI successfully optimized the surface oxygen species and oxygen migration ability of the catalyst, and then realized the high degree of mineralization of toluene at low temperature. This paper guides the subsequent development of Pt-Mn catalysts for catalytic organic pollutants ozonation with high activity.

Engineering of Mn3O4@Ag microspheres assembled from nanosheets for superior O3 decomposition

A topochemical transformation route was designed for synthesis of Mn3O4 nanospheres using β-MnOOH as the precursor. Ag nanoparticles were doped via an in situ redox reaction to obtain Mn3O4@Ag-NF, which displayed an enhanced performance for O3 elimination.

Boosting the Dispersity of Metallic Ag Nanoparticles and Ozone Decomposition Performance of Ag-Mn Catalysts via Manganese Vacancy-Dependent Metal-Support Interactions

Ozone (O₃) removal has important implications for environmental protection and human health, and Ag-Mn catalysts have shown promising O₃ decomposition. Catalysts with Ag supported on porous cube-like α-Mn₂O₃ (Ag/Mn-C) with high utilization of Ag were prepared by the impregnation method and showed excellent O₃ decomposition activity. Physicochemical characterizations demonstrated that metallic Ag nanoparticles (Ag_n⁰) were mainly anchored on manganese vacancies, forming Ag-O-Mn bonds between Ag_n⁰ and α-Mn₂O₃-C. The abundant manganese vacancies of α-Mn₂O₃-C can lead to Ag_n⁰ with a smaller particle size and more uniform dispersion, thereby resulting in markedly enhanced O₃ decomposition performance compared to Ag_n⁰ with a large particle size and uneven distribution on rod-like α-Mn₂O₃ (Ag/Mn-R). Under a relative humidity of 65% and a space velocity of 1,110,000 h^-1, the conversion of 40 ppm O₃ over the 2%Ag/Mn-C catalyst within 6 h (98%) at 30 °C was more than twice as high as that of the 2%Ag/Mn-R catalyst (42%). The study provides guidance for the design of highly efficient Ag-based catalysts and the understanding of the microstructure of supported catalysts.

Trace holmium assisting delaminated OMS-2 catalysts for total toluene oxidation at low temperature

In this study, octahedral molecular sieve (OMS-2) is successfully delaminated by using trace holmium (Ho) via a facile redox co-precipitation route, which exhibits high performance for the total toluene oxidation at low temperature. High resolution transmission electron microscope (HRTEM), X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance (EPR) analyses verify that abundant multi-phase interfaces and lattice dislocations are formed on the obtained delaminated OMS-2 by the Ho (Ho-OMS-2), which can induce more active oxygen species. In particular, the delaminated OMS-2 with a trace Ho amount has a high O_ads/O_latt ratio with a balanced ratio of Mn³⁺ and Mn⁴⁺, demonstrating much higher activity (T_100% of 228 °C even under 5 vol% H₂O vapor over 0.5% Ho-OMS-2) than the parent OMS-2 (T_100% of 261 °C) for the total toluene oxidation. Furthermore, the positive effect of the introduction of H₂O on catalytic activity, especially the enhancement of the conversion of intermediates into CO₂ and H₂O, is verified by the in situ diffuse reflection infrared Fourier transform spectroscopy (DRIFTS). Based on these results, the reaction mechanism for toluene oxidation over the OMS-2 based catalyst is proposed. It is expected to provide an effective preparation method to obtain high-performance catalysts for the VOCs oxidation at low temperatures.

A novel γ-like MnO2 catalyst for ozone decomposition in high humidity conditions

MnO₂ catalysts have been widely studied for catalytic gaseous ozone decomposition. However, their poor moisture resistance often leads to undesirable catalytic effects in the presence of high humidity. In this study, a novel catalyst with γ-like MnO₂ was synthesized using the selective dissolution method on LaMnO₃ perovskites. The as-prepared catalyst exhibited quite stable ozone conversion of ~90% within 12 h under 75% relative humidity (400-800 ppm of ozone, 30 °C, 150 000 mL·g^-1·h^-1 of WHSV). In contrast, traditional γ-MnO₂ catalyst showed deficient resistance to H₂O and sensitivity to space velocity. Detailed characterizations showed that the larger number of oxygen vacancies induced by structure reconstruction of the γ-like MnO₂ and residual La³⁺ cations facilitated ozone decomposition in humid atmosphere. Finally, the reaction rate of ozone decomposition was proposed by a kinetic study, which further proved that the amount and hydrophilicity of oxygen vacancies are the determinants of the first-order reaction rate constant.

Enhanced activity and water tolerance promoted by Ce on MnO/ZSM-5 for ozone decomposition

Catalytic decomposition is a promising way to eliminate ozone using manganese oxides. However, water-induced deactivation of the catalysts remains a challenge for further application. In this work, a series of Ce-promoted MnO supported on ZSM-5 (Mn-xCe/ZSM-5) were developed for ozone decomposition, which exhibited superior catalytic performance. The catalysts were characterized by multiple techniques. It is indicated that MnO was highly dispersed on ZSM-5 (Mn/ZSM-5), accounting for the high performance of ozone decomposition. Addition of Ce in Mn/ZSM-5 formed abundant redox pairs that promoted electron transfer, and thus exhibited superior ozone decomposition activity. Mn-3Ce/ZSM-5 with medium Ce loading showed the maximum activity by exposing the most active sites. Furthermore, Mn-3Ce/ZSM-5 was highly water-resistant in comparison with Mn/ZSM-5 by modulating the surface acidic property to be beneficial for the water desorption. This work provides an efficient and facile way to fabricate Ce-promoted Mn with low valence for effective and stable decomposition of ozone at room temperature.

Macroporous MnO2-based aerogel crosslinked with cellulose nanofibers for efficient ozone removal under humid condition

Atmospheric ozone pollution receives worldwide concerns, and it is a big challenge to search for the practical ozone-decomposition catalyst with good moisture resistance. Herein, a light-weight and high-porosity MnO₂-based hybrid aerogel was synthesized with cellulose nanofibers using a facile ice-template approach, followed by freeze-drying. In the three-dimensional framework, the cellulose nanofibers serve as the skeletons to disperse MnO₂ particles, improving the exposure of active sites on MnO₂. XPS, ¹H NMR and ATR-FTIR demonstrate that MnO₂ particles are effectively combined with cellulose nanofibers through hydrogen bonds, which originate from the abundant surface hydroxyl groups of both components. These consumed surface hydroxyl groups of MnO₂ not only reduce the water adsorption but also avoid the generation of surface-adsorbed H₂O via the reaction with ozone, thus alleviating the catalyst deactivation. In addition, the interconnected macroporous structure enables the rapid diffusion of ozone molecules and facilitates the passage of water molecules, which is conducive to the adsorption and decomposition of ozone on the active sites, i.e. surface oxygen vacancies. Thus, the high and stable ozone conversion was achieved for 150 ppb O₃ under the relative humidity of 50% and the space velocity of 600 L·g^-1·h^-1 within 10 days at room temperature.

MnO2 -Based Materials for Environmental Applications

Manganese dioxide (MnO₂ ) is a promising photo-thermo-electric-responsive semiconductor material for environmental applications, owing to its various favorable properties. However, the unsatisfactory environmental purification efficiency of this material has limited its further applications. Fortunately, in the last few years, significant efforts have been undertaken for improving the environmental purification efficiency of this material and understanding its underlying mechanism. Here, the aim is to summarize the recent experimental and computational research progress in the modification of MnO₂ single species by morphology control, structure construction, facet engineering, and element doping. Moreover, the design and fabrication of MnO₂ -based composites via the construction of homojunctions and MnO₂ /semiconductor/conductor binary/ternary heterojunctions is discussed. Their applications in environmental purification systems, either as an adsorbent material for removing heavy metals, dyes, and microwave (MW) pollution, or as a thermal catalyst, photocatalyst, and electrocatalyst for the degradation of pollutants (water and gas, organic and inorganic) are also highlighted. Finally, the research gaps are summarized and a perspective on the challenges and the direction of future research in nanostructured MnO₂ -based materials in the field of environmental applications is presented. Therefore, basic guidance for rational design and fabrication of high-efficiency MnO₂ -based materials for comprehensive environmental applications is provided.

Exploring an efficient manganese oxide catalyst for ozone decomposition and its deactivation induced by water vapor

A series of MnO_x catalysts supported by carbon spheres were prepared by calcining mixtures of manganese acetate and carbon spheres under a nitrogen atmosphere, and their performance for ozone decomposition under high humidity conditions (RH = 90%) was evaluated.

Real time detection and monitoring of 2, 4-dinitrophenylhydrazine in industrial effluents and water bodies by electrochemical approach based on novel conductive polymeric composite

Much attention has been given to detection and monitoring of hydrazine-based compounds in recent time because of its significant negative impacts on human health and ecosystem (aquatic lives). This prompted the current study focusing on detection of 2, 4-dinitrophenylhydrazine (2, 4-dnphz) using electrochemically synthesized poly-para amino benzoic acid-manganese oxide (P-pABA-MnO₂) composite film. The synthesized P-pABA-MnO₂ composite film was characterized in terms of its structural and morphological properties by X-ray diffraction spectroscopy and field emission scanning electron microscopy respectively. In addition, functionalities and binding energy of p-PABA-MnO2 were confirmed using Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy respectively. Finally, electrochemical properties were investigated using electrochemical impedance spectroscopy and cyclic voltammetry. The synthesized P-pABA-MnO₂ displayed good electrocatalytic reduction property towards 2, 4-dnphz with ultra-low limit of detection (0.08 μM; S/N = 3) and very high sensitivity (52 μAμ^-1Mcm^-2). The proposed sensor based on P-pABA-MnO₂ also demonstrated good stability in terms of repeatability, reproducibility and interferents effects. Lastly, the proposed sensor was satisfactorily used in detection of 2, 4-dnphz in environmental real samples.

Tuning the Chemical State of Silver on Ag-Mn Catalysts to Enhance the Ozone Decomposition Performance

Ag-Mn catalysts with excellent water resistance and ozone decomposition activity were successfully synthesized by simple precipitation and impregnation methods. Under a relative humidity of 65% and space velocity of 840,000 h^-1, the 6%Ag/α-Mn₂O₃-I catalyst showed 99% conversion of 40 ppm O₃ after 6 h, which was far superior to the performance of the 6%AgMnO_x-C (49%), 6%Ag/MnCO₃-I (32%), and α-Mn₂O₃ (5%) catalysts. Physicochemical characterization indicated that the chemical state of Ag on the Ag-Mn catalysts determined the O₃ decomposition activity of the catalysts. The Ag species on the 6%Ag/α-Mn₂O₃-I catalyst were mainly metallic silver nanoparticles (Ag_n⁰), which exhibited much better ozone decomposition performance than the Ag_1.8Mn₈O₁₆ and oxidized silver clusters (Ag_n^δ+) existing on the 6%Ag/MnCO₃-I and 6%AgMnO_x-C catalysts. The 6%Ag/α-Mn₂O₃-I catalyst still had above 85% ozone conversion after 60 h under a relative humidity of 65% and space velocity of 840,000 h^-1. The slight deactivation of the catalyst was ascribed to the oxidation of Ag_n⁰, and its activity could be completely recovered by treatment at 350 °C under an N₂ atmosphere, which indicated that it is a promising catalyst for ozone decomposition. This research provides guidance for the subsequent development of Ag-Mn catalysts for ozone decomposition with high activity.

Recent advances in catalytic decomposition of ozone

Ozone (O₃), as a harmful air pollutant, has been of wide concern. Safe, efficient, and economical O₃ removal methods urgently need to be developed. Catalytic decomposition is the most promising method for O₃ removal, especially at room temperature or even subzero temperatures. Great efforts have been made to develop high-efficiency catalysts for O₃ decomposition that can operate at low temperatures, high space velocity and high humidity. First, this review describes the general reaction mechanism of O₃ decomposition on noble metal and transition metal oxide catalysts. Then, progress on the O₃ decomposition performance of various catalysts in the past 30 years is summarized in detail. The main focus is the O₃ decomposition performance of manganese oxides, which are divided into supported manganese oxides and non-supported manganese oxides. Methods to improve the activity, stability, and humidity resistance of manganese oxide catalysts for O₃ decomposition are also summarized. The deactivation mechanisms of manganese oxides under dry and humid conditions are discussed. The O₃ decomposition performance of monolithic catalysts is also summarized from the perspective of industrial applications. Finally, the future development directions and prospects of O₃ catalytic decomposition technology are put forward.

Gram-scale synthesis of ultra-fine Cu2O for highly efficient ozone decomposition

Dozens of grams of ultra-fine Cu₂O with efficient ozone decomposition was prepared by a facile liquid phase reduction method at room temperature.

Unravelling the efficient catalytic performance of ozone decomposition over nitrogen-doped manganese oxide catalysts under high humidity

Nitrogen-doped Mn species, coated with a carbon layer of several nanometers in thickness, for enhanced water vapor resistance.

Improving the catalytic performance of ozone decomposition over Pd-Ce-OMS-2 catalysts under harsh conditions

Durable Pd-Ce-OMS-2 catalysts for ozone catalytic decomposition under harsh conditions were successfully prepared via a simple one-step hydrothermal process.