Superhydrophilic/superaerophobic CoP/CoMoO4 multi-level hierarchitecture electrocatalyst for urea-assisted hydrogen evolution reaction in alkaline media

Utilizing the thermodynamically favorable urea oxidation reaction instead of the anodic oxygen precipitation reaction is an alternative pathway for the energy-saving hydrogen production. Therefore, it is significant to explore advanced electrocatalysts for both HER and UOR. In this work, a dendritic heteroarchitectures of 2D CoMoO4 nanosheets deposited on 1D CoP nanoneedles (CoP/CoMoO4-CC) was fabricated as bifunctional electrocatalyst. 1D CoP nanostructure with fast charge transport pathways and 2D CoMoO4 nanostructure with large specific surface area and short paths for electron/mass transport. The unique morphology endows the superhydrophilic and superaerophobic properties, allowing for the rapid contact with the reactants and rapid removal of surface-generated gases. As a result, the CoP/CoMoO4-CC shows efficient bifunctional activity. This work offers a new avenue to rationally design bifunctional electrocatalysts for large-scale practical hydrogen production.

Boosting urea-assisted water splitting over P-MoO2@CoNiP through Mo leaching/reabsorption coupling CoNiP reconstruction

Combining the urea oxidation reaction (UOR) with the hydrogen evolution reaction (HER) is an effective technology for energy-saving hydrogen production. Herein, a bifunctional electrocatalyst with CoNiP nanosheet coating on P-doped MoO2 nanorods (P-MoO2@CoNiP) is obtained via a two-step hydrothermal followed a phosphorization process. The catalyst demonstrates exceptional alkaline HER performance due to the formation of MoO2 and the dissolution/absorption of Mo. Meanwhile, the inclusion of Co and P in the P-MoO2@CoNiP catalyst facilitated the formation of NiOOH, enhancing UOR performance. Density functional theory calculations reveal that the hydrogen adsorption Gibbs free energy (ΔGH*) of P-MoO2@CoNiP is closer to 0 eV than CoNiP, favoring the HER. The catalyst only needs -0.08 and 1.38 V to reach 100 mA cm-2 for catalyzing the HER and UOR, respectively. The full urea electrolysis system driven by P-MoO2@CoNiP requires 1.51 V to achieve 100 mA cm-2, 120 mV lower than the traditional water electrolysis.

Improved Urea Oxidation Performance via Interface Electron Redistributions of the NiFe(OH)x/MnO2/NF p-p Heterojunction

The development of highly efficient urea oxidation reaction (UOR) electrocatalysts is the key to simultaneously achieving green hydrogen production and the treatment of urea-containing wastewater. Ni-based electrocatalysts are expected to replace precious metal catalysts for UOR because of their high activity and low cost. However, the construction of Ni-based electrocatalysts that can synergistically enhance UOR still needs further in-depth study. In this study, highly active electrocatalysts of NiFe(OH)x/MnO2 p-p heterostructures are constructed on nickel foam (NF) by electrodeposition (NiFe(OH)x/MnO2/NF), illustrating the effect of electronic structure changes at heterogeneous interfaces on UOR and revealing the catalytic mechanism of UOR. The NiFe(OH)x/MnO2/NF only needs 1.364 V (vs Reversible Hydrogen Electrode, RHE) to reach 10 mA cm-2 for UOR. Structural characterizations and theoretical calculations indicate that energy gap leads to directed charge transfer and redistribution at the heterojunction interface, forming electron-rich (MnO2) and electron-poor (NiFe(OH)x) regions. This enhances the catalyst's adsorption of urea and reaction intermediates, reduces thermodynamic barriers during the UOR process, promotes the formation of Ni3+ phases at lower potentials, and thus improves UOR performance. This work provides a new idea for the development of Ni-based high-efficiency UOR electrocatalysts.

Enhanced Urea Oxidation Electrocatalytic Activity by Synergistic Cobalt and Nickel Mixed Oxides

Exploring reactive and selective Ni-based electrocatalysts for the urea oxidation reaction (UOR) is crucial for developing urea-related energy conversion technologies. Herein, synergistic interactions in Ni/Co mixed oxides/hydroxides enhanced the UOR with low onset potential, fast reaction kinetics, and good selectivity against the oxygen evolution reaction (OER). Our electrochemical measurements and theoretical calculations signified the collaborative interaction of Ni/Co mixed oxide/hydroxide heterostructures to enhance UOR activity. Our results showed that Ni3+ species, formed at high anodic potential, produced a high anodic current primarily from unwanted OER. Instead, the Ni/Co heterostructures with dominant Ni2+ and Co3+ species remained stable at low anodic potential and exhibited anodic current exclusively attributed to UOR. This work highlights the importance of tuning valence charges for designing high-performance and selective UOR electrocatalysts to benefit the environmental remediation of urea runoff and enable urea electrolysis for hydrogen production by replacing conventional OER with UOR at the anode.

Binary and nanostructured NiMn perovskite fluorides as efficient electrocatalysts for urea oxidation reaction

Urea electrolysis holds tremendous promise to provide green and sustainable energy and environmental solutions, because it can simultaneously remedy urea-containing wastewater and provide energy-saving hydrogen. However, the development of this emerging technology remains challenging mainly due to a dearth of high-performance electrocatalysts for efficient urea oxidation reaction (UOR). Perovskite fluorides have the advantages of intrinsic 3D diffusion pathways, robust architecture, and tunable chemical composition, thus receiving increasing attention in many applications. In this work, the UOR performances of a series of ABF3 samples (A = K; B = Ni/Mn, Ni/Co, Co/Mn) with various compositions are investigated in a systematic fashion for the first time. Among the binary samples, KNMF41 (Ni/Mn atomic ratio = 4:1) is the optimal sample with reduced overpotential (reaching 100 mA cm-2 at 1.43 V), low Tafel slope (40 mV dec-1), enhanced reaction rate constant (6.3 × 105 cm3 mol-1 s-1), and high turnover frequency (TOF, 0.19 s-1 at 1.60 V) toward urea oxidation. By comparing with NiCo and CoMn samples, the binary NiMn design is confirmed to endow the perovskite fluoride with higher electrocatalytic activity, thanks to the directed adsorption of urea molecules on the adjacent NiMn active sites. This work presents a targeted synthetic strategy for obtaining efficient electrocatalysts.

Recent Advances in Hybrid Seawater Electrolysis for Hydrogen Production

Seawater electrolysis (SWE) is a promising and potentially cost-effective approach to hydrogen production, considering that seawater is vastly abundant and SWE is able to combine with offshore renewables producing green hydrogen. However, SWE has long been suffering from technical challenges including the high energy demand and interference of chlorine chemistry, leading electrolyzers to a low efficiency and short lifespan. In this context, hybrid SWE, operated by replacing the energy-demanding oxygen evolution reaction and interfering chlorine evolution reaction (CER) with a thermodynamically more favorable anodic oxidation reaction (AOR) or by designing innovative electrolyzer cells, has recently emerged as a better alternative, which not only allows SWE to occur in a safe and energy-saving manner without the notorious CER, but also enables co-production of value-added chemicals or elimination of environmental pollutants. This review provides a first account of recent advances in hybrid SWE for hydrogen production. The substitutional AOR of various small molecules or redox mediators, in couple with hydrogen evolution from seawater, is comprehensively summarized. Moreover, how the electrolyzer cell design helps in hybrid SWE is briefly discussed. Last, the current challenges and future outlook about the development of the hybrid SWE technology are outlined.

Regulating the electronic structure of Ni2P by one-step Co, N dual-doping for boosting electrocatalytic performance toward oxygen evolution reaction and urea oxidation reaction

The development of efficient bifunctional electrocatalysts for oxygen evolution reaction (OER) and urea oxidation reaction (UOR) is critical for hydrogen production and wastewater purification. In this work, we propose a facile synthetic method for Co and N dual-doped Ni2P directly grown on Ni foam (Co-Ni2P-N/NF) using hydrothermal and annealing process. Simultaneous Co and N dual-doping into Ni2P not only modifies the surface electronic structure, but also generates a multitude of active sites with high valence states, which are beneficial for improving electrocatalytic kinetics for both OER and UOR. As a result, the Co-Ni2P-N/NF catalyst exhibits a low overpotential of 329 mV to deliver a current density of 100 mA cm-2 for OER in alkaline solution, which is much lower than that of the state-of-the-art RuO2 electrocatalyst. In addition, the urea-assisted water oxidation process exhibits a significant reduction of approximately 163 mV in the required potential at 100 mA cm-2 compared to that of the OER, which highlights the remarkable potential of the prepared Co-Ni2P-N/NF electrocatalyst in facilitating the purification of wastewater and hydrogen production with significantly lower energy consumption.

Modulation Strategies for the Preparation of High-Performance Catalysts for Urea Oxidation Reaction and Their Applications

Compared with the traditional electrolysis of water to produce hydrogen, urea-assisted electrolysis of water to produce hydrogen has significant advantages and has received extensive attention from researchers. Unfortunately, urea oxidation reaction (UOR) involves a complex six-electron transfer process leading to high overpotential, which forces researchers to develop high-performance UOR catalysts to drive the development of urea-assisted water splitting. Based on the UOR mechanism and extensive literature research, this review summarizes the strategies for preparing highly efficient UOR catalysts. First, the UOR mechanism is introduced and the characteristics of excellent UOR catalysts are pointed out. Aiming at this, the following modulation strategies are proposed to improve the catalytic performance based on summarizing various literature: 1) Accelerating the active phase formation to reduce initial potential; 2) Creating double active sites to trigger a new UOR mechanism; 3) Accelerating urea adsorption and promoting C─N bond cleavage to ensure the effective conduct of UOR; 4) Promoting the desorption of CO2 to improve stability and prevent catalyst poisoning; 5) Promoting electron transfer to overcome the inherent slow dynamics of UOR; 6) Increasing active sites or active surface area. Then, the application of UOR in electrochemical devices is summarized. Finally, the current deficiencies and future directions are discussed.

Large scale uniform Ni-P plated carbon fiber for boosting urea electro-oxidation and electro-detection

Seeking an excellent electrocatalyst is the trickiest issue for the application of urea electro-oxidation and electro-detection. Phosphorus-doped nickel plating on carbon fibers (Ni-P/CF) is synthesized by simple electroless plating. SEM results exhibit that the Ni-P densely and uniformly grows onto the surface of carbon fibers (CF), forming carbon fibers-like nanoarchitectures. Benefiting from the carbon fibers-like nano architectures with abundant exposed active sites on the surface of CF, electron transfer can be synchronously facilitated, and Ni-P/CF displays superior urea electrooxidation (UOR) performance with potentials of 1.40 V to reach 100 mA cm-2. Impressively, it can maintain at 20 mA cm-2 for 48 h without evident activity attenuation, demonstrating robust durability. Cycle stability shows that the voltage has only increased by 10 mV at 300 mA cm-2 from the 10th to 20000th cycles. Most importantly, Ni-P/CF at a length of 100 cm with good reproducibility was successfully synthesized, denoting great potential for large-scale industrial production. Therefore, this work not only affords cost-effective tactics for urea-rich wastewater degradation but also can achieve practical medical applications.

Surface Engineering over Metal-Organic Framework Nanoarray to Realize Boosted and Sustained Urea Oxidation

Facilitating C─N bond cleavage and promoting *COO desorption are essential yet challenging in urea oxidation reactions (UORs). Herein a novel interfacial coordination assembly protocol is established to modify the Co-phytate coordination complex on the Ni-based metal-organic framework (MOF) nanosheet array (CC/Ni-BDC@Co-PA) toward boosted and sustained UOR electrocatalysis. Comprehensive experimental and theoretical investigations unveil that surface Co-PA modification over Ni-BDC can manipulate the electronic state of Ni sites, and in situ evolved charge-redistributed surface can promote urea adsorption and the subsequent C─N bond cleavage. Impressively, Co-PA functionalization can impart a negatively charged catalyst surface with improved aerophobicity, not only weakening *COO adsorption and promoting CO2 departure, but also repelling CO3 2- approaching to deactivate Ni species, eventually alleviating CO2 poisoning and enhancing operational durability. Beyond that, improved hydrophilic and aerophobic characteristics would also contribute to better mass transfer kinetics. Consequently, CC/Ni-BDC@Co-PA exhibits prominent UOR performance with an ultralow potential of 1.300 V versus RHE to attain 10 mA cm-2 , a small Tafel slope of 45 mV dec-1 , and strong durability, comparable to the best Ni-based electrocatalysts documented thus far. This work affords a novel paradigm to construct MOF-based materials for promoted and sustained UOR catalysis through elegant surface engineering based on a metal-PA complex.

H2O2 treatment boosts activity of NiFe layered double hydroxide for electro-catalytic oxidation of urea

Urea oxidation reaction (UOR) provides a method for hydrogen production besides wastewater treatment, but the current limited catalytic activity has prevented the application. Herein, we develop a novel H₂O₂ treatment strategy for tailoring the surface oxygen ligand of NiFe-layered double hydroxides (NiFe-LDH). The sample after H₂O₂ treatment (NiFeO-LDH) shows significant enhancement on UOR efficiency, with the potential of 1.37 V (RHE) to reach a current density of 10 mA/cm². The boost is attributed to the richness adsorption O ligand on NiFeO-LDH as revealed by XPS and Raman analysis. DFT calculation indicates formation of two possible types of oxygen ligands: adsorbed oxygen on the surface and exposed from hydroxyl group, lowered the desorption energy of CO₂ product, which lead to the lowered onset potential. This strategy is further extended to NiFe-LDH nano sheet on Ni foam to reach a higher current density of 440 mA/cm² of UOR at 1.8 V (RHE). The facile surface O ligand manipulation is also expected to give chance to many other electro-catalytic oxidations.

3D Hierarchical-Architectured Nanoarray Electrode for Boosted and Sustained Urea Electro-Oxidation

Exploring active and durable Ni-based materials with optimized electronic and architectural engineering to promote the urea oxidation reaction (UOR) is pivotal for the urea-related technologies. Herein a 3D self-supported hierarchical-architectured nanoarray electrode (CC/MnNi@NC) is proposed in which 1D N-doped carbon nanotubes (N-CNTs) with 0D MnNi nanoparticles (NPs) encapsulation are intertwined into 2D nanosheet aligned on the carbon cloth for prominently boosted and sustained UOR electrocatalysis. From combined experimental and theoretical investigations, Mn-alloying can regulate Ni electronic state with downshift of the d-band center, facilitating active Ni³⁺ species generation and prompting the rate-determining step (*COO intermediate desorption). Meanwhile, the micro/nano-hierarchical nanoarray configuration with N-CNTs encapsulating MnNi NPs can not only endow strong operational durability against metal corrosion/agglomeration and enrich the density of active sites, but also accelerate electron transfer, and more intriguingly, promote mass transfer as a result of desirable superhydrophilic and quasi-superaerophobic characteristics. Therefore, with such elegant integration of 0D, 1D and 2D motifs into 3D micro/nano-hierarchical architecture, the resulting CC/MnNi@NC can deliver admirable UOR performance, favorably comparable to the best-performing UOR electrocatalysts reported thus far. This work opens a fresh prospect in developing advanced electrocatalysts via electronic manipulation coupled with architectural engineering for various energy conversion technologies.

Unconventional Phase Synergies with Doping Engineering Over Ni Electrocatalyst Featuring Regulated Electronic State for Accelerated Urea Oxidation

Exploring high-performing Ni-based electrocatalysts for the urea oxidation reaction (UOR) is crucial for developing urea-related energy technologies yet remains a daunting challenge. In this study, a synergistic anomalous hcp phase and heteroatom doping engineering over metallic Ni are found to enhance the UOR. A metal-organic framework-mediated approach is proposed to construct Ni nanoparticles (NPs) with designated crystal phase embedded in N-doped carbon (fcc-Ni/NC and hcp-Ni/NC). Significant crystal phase-dependent catalytic activity for the UOR is observed; hcp-Ni/NC, featuring unusual hcp phase, outperforms fcc-Ni/NC with conventional fcc phase. Moreover, incorporating foreign Mn species in hcp-Ni/NC can further dramatically promote UOR, making it among the best UOR catalysts reported to date. From experimental results and DFT calculations, the specific nanoarchitecture, involving an anomalous hcp phase together with Mn doping engineering, endows hcp-MnNi/NC with abundant exposed active sites, facile charge transfer, and more significantly, optimized electronic state, giving rise to enriched Ni³⁺ active species and oxygen vacancies on the catalyst surface during electrocatalysis. These features collectively contribute to the enhanced UOR activity. This work highlights a potent design strategy to develop advanced catalysts with regulated electronic state through synergistic crystal phase and doping engineering.

High-Density NiCu Bimetallic Phosphide Nanosheet Clusters Constructed by Cu-Induced Effect Boost Total Urea Hydrolysis for Hydrogen Production

The development of urea electrolysis technologies toward energy-saving hydrogen production can alleviate the environmental issues caused by urea-rich wastewater. In the current practices, the development of high-performance electrocatalysts in urea electrolysis remains critical. In this work, the NiCu-P/NF catalyst is prepared by anchoring Ni/Cu bimetallic phosphide nanosheets onto Ni foam (NF). In the experiments, the micron-sized elemental Cu polyhedron is first anchored on the surface of the NF substrate to provide more space for the growth of bimetallic nanosheets. Meanwhile, the Cu element adjusted the electron distribution within the composite and formed Ni/P orbital vacancies, which in turn accelerated the kinetic process. As a result, the optimal NiCu-P/NF sample exhibits excellent catalytic activity and cycling stability in a hybrid electrolysis system for the urea oxidation reaction (UOR) and hydrogen evolution reaction (HER). Further, the alkaline urea-containing electrolyzer is assembled with NiCu-P/NF as two electrodes reached a current density of 50 mA cm^-2 with a low driving potential of 1.422 V, which outperforms the typical commercial noble metal electrolyzer (RuO₂||Pt/C). Those findings suggest the feasibility of the substrate regulation strategy to increase the growth density of active species in preparation of an efficient bifunctional electrocatalyst for cracking the urea-containing wastewater.

The effect of tensile strain in Pd-Ni core-shell nanocubes with tuneable shell thickness on urea electrolysis selectivity

Expanding our understanding of the structure-performance relationship in nanoscale electrocatalysts for urea electrolysis is crucial for efficient urea waste treatment and concomitant cathodic hydrogen production or CO₂ reduction. Here, we elucidate the effect of the lattice strain in Pd-Ni core-shell nanocubes on the dominance of urea overoxidation pathway.

Controlled synthesis of Crx-FeCo2P nanoarrays on nickel foam for overall urea splitting

Urea splitting is a highly promising technology for hydrogen production to cope with the fossil energy crisis, which requires the development of catalysts with high electrocatalytic activity. In this article, Cr_x-FeCo₂P/NF catalysts were synthesized by hydrothermal and low-temperature phosphorylation and used in the overall urea splitting process. Cr_0.15-FeCo₂P/NF and Cr_0.1-FeCo₂P/NF exhibited excellent urea oxidation reaction (UOR) activity (potential of 1.355 V at 100 mA cm^-2) and hydrogen evolution reaction (HER) activity (overpotential of 173 mV at 10 mA cm^-2) in 0.5 M urea solution containing 1 M KOH. In the assembled Cr_0.15-FeCo₂P/NF//Cr_0.1-FeCo₂P/NF electrolytic cell, only a small voltage of 1.50 V is needed to reach 10 mA cm^-2. Density functional theory (DFT) calculation results demonstrate that an appropriate amount of Cr doping accelerates the kinetic performance of hydrogen production as well as improving the metallic properties of the electrode.

Cu-induced NiCu-P and NiCu-Pi with multilayered nanostructures as highly efficient electrodes for hydrogen production via urea electrolysis

Since urea is commonly present in domestic sewage and industrial wastewater, its use in hydrogen production by electrolysis can simultaneously help in water decontamination. To achieve this goal, the development of highly active and inexpensive urea electrolysis catalysts is necessary. This study deals with the preparation of multilayered nickel and copper phosphides/phosphates (NiCu-P/NF and NiCu-Pi/NF) supported on Ni foam (NF) and their application as new electrocatalyst types for the electrolysis of urea-containing wastewaters. In these materials, Cu atoms induce the formation of multilayer nanostructures and modulate electron distribution, allowing for the exposure of additional active sites and acceleration of the process kinetics. NiCu-P/NF is used as a cathode and NiCu-Pi/NF as an anode in an electrolysis cell and exhibits significant catalytic activity and stability in the urea oxidation reaction (UOR) and the hydrogen evolution reaction (HER). The NiCu-Pi/NF||NiCu-P/NF electrolysis cell, operating with an alkaline urea-containing aqueous electrolyte, achieves a current density of 10 mA cm^- at a potential of 1.41 V, which is less than required by the RuO₂||Pt/C cell utilizing commercial noble metal-based electrodes. The study provides a novel strategy for designing efficient catalysts to produce hydrogen by urea electrolysis.

Ni2P Nanoparticle-Inserted Porous Layered NiO Hetero-Structured Nanosheets as a Durable Catalyst for the Electro-Oxidation of Urea

The electro-oxidation of urea (EOU) is a remarkable but challenging sustainable technology, which largely needs a reduced electro-chemical potential, that demonstrates the ability to remove a notable harmful material from wastewater and/or transform the excretory product of humans into treasure. In this work, an Ni₂P-nanoparticle-integrated porous nickel oxide (NiO) hetero-structured nanosheet (Ni₂P@NiO/NiF) catalyst was synthesized through in situ acid etching and a gas-phase phosphating process. The as-synthesized Ni₂P@NiO/NiF catalyst sample was then used to enhance the electro-oxidation reaction of urea with a higher urea oxidation response (50 mA cm^-2 at 1.31 V vs. RHE) and low onset oxidation potential (1.31 V). The enhanced activity of the Ni₂P@NiO/NiF catalyst was mainly attributed to effective electron transport after Ni₂P nanoparticle insertion through a substantial improvement in active sites due to a larger electrochemical surface area, and a faster diffusion of ions occurred via the interactive sites at the interface of Ni₂P and NiO; thus, the structural reliability was retained, which was further evidenced by the low charge transfer resistance. Further, the Ni₂P nanoparticle insertion process into the NiO hetero-structured nanosheets effectively enabled a synergetic effect when compared to the counter of the Ni₂P/NiF and NiO/NiF catalysts. Finally, we demonstrate that the as-synthesized Ni₂P@NiO/NiF catalyst could be a promising electrode for the EOU in urea-rich wastewater and human urine samples for environmental safety management. Overall, the Ni₂P@NiO/NiF catalyst electrode combines the advantages of the Ni₂P catalyst, NiO nanosheet network, and NiF current collector for enhanced EOU performance, which is highly valuable in catalyst development for environmental safety applications.

Three-dimensional Ni4O4-cubane metal-organic framework as a high-performance electrocatalyst for urea oxidation

The urea oxidation reaction (UOR) is considered to be a replacement of the sluggish anodic oxygen evolution reaction (OER) in overall water-splitting. A three-dimensional (3D) nickel-containing metal-organic framework {[Ni^II ₂(pdaa)(OH)₂(H₂O)] _n (MOF 1) (where, H₂pdaa = 1,4-phenylene diacetic acid) was investigated as a robust and highly efficient electrocatalyst for the UOR. MOF 1 comprised 1D nickel(ii) chains crosslinked through Ni₄O₄ cubane units to form a 3D extended network. Dangling Ni⋯OH^- groups were exposed in the MOF 1 structure, and could act as active catalytic centers for the UOR. MOF 1 required a very small onset potential of 1.18 V for urea oxidation in KOH (1 M) and urea (0.33 M) and had a low Tafel slope of 38.8 mV dec^-1 (in contrast to 1.84 V for the oxygen evolution reaction). The overpotential required to attain a catalytic current density of 10 mA cm^-2 was 1.24 V, which is much lower than that for many materials. Controlled potential electrolysis, powder X-ray diffraction, and X-ray photoelectron spectroscopy affirmed the physicochemical integrity of the catalyst over a 17 h test reaction. This work not only addresses the problem of urea contamination, it also helps to utilize it in an energy-conversion process.

Recent Development of Nickel-Based Electrocatalysts for Urea Electrolysis in Alkaline Solution

Recently, urea electrolysis has been regarded as an up-and-coming pathway for the sustainability of hydrogen fuel production according to its far lower theoretical and thermodynamic electrolytic cell potential (0.37 V) compared to water electrolysis (1.23 V) and rectification of urea-rich wastewater pollution. The new era of the "hydrogen energy economy" involving urea electrolysis can efficiently promote the development of a low-carbon future. In recent decades, numerous inexpensive and fruitful nickel-based materials (metallic Ni, Ni-alloys, oxides/hydroxides, chalcogenides, nitrides and phosphides) have been explored as potential energy saving monofunctional and bifunctional electrocatalysts for urea electrolysis in alkaline solution. In this review, we start with a discussion about the basics and fundamentals of urea electrolysis, including the urea oxidation reaction (UOR) and the hydrogen evolution reaction (HER), and then discuss the strategies for designing electrocatalysts for the UOR, HER and both reactions (bifunctional). Next, the catalytic performance, mechanisms and factors including morphology, composition and electrode/electrolyte kinetics for the ameliorated and diminished activity of the various aforementioned nickel-based electrocatalysts for urea electrolysis, including monofunctional (UOR or HER) and bifunctional (UOR and HER) types, are summarized. Lastly, the features of persisting challenges, future prospects and expectations of unravelling the bifunctional electrocatalysts for urea-based energy conversion technologies, including urea electrolysis, urea fuel cells and photoelectrochemical urea splitting, are illuminated.

The synthesis of CoS/MnCo2O4-MnO2 nanocomposites for supercapacitors and energy-saving H2 production

In this study, CoS/MnCo₂O₄-MnO₂ (CMM) nanocomposites were synthesized by hydrothermal and then electrochemical deposition. Their electrochemical properties were systematically investigated for supercapacitors and energy-saving H₂ production. As an electrode material for supercapacitor, CMM demonstrates a specific capacitance of 2320F g^-1 at 1 A/g, and maintains a specific capacitance of 1216F g^-1 at 10 A/g. It also shows 72.8 % capacitance retention after 8000 cycles. The aqueous asymmetric supercapacitor exhibited high energy storage capacity (887.86F g^-1 specific capacitance at a current density of 1 A/g), good rate performance and cycling stability. Besides, CMM shows outstanding urea oxidation reaction(UOR) and glycol oxidation reaction (MOR) performances for H₂ production. Compared to oxygen evolution reaction (OER) (1.635 V) at 20 mA cm^-2, the potentials were reduced by 213 mV for UOR and 233 mV for MOR, respectively. Therefore, this study shows the promising practical applications of CMM nanocomposites for energy storage and energy-saving H₂ production.

Bimetallic Cu/Fe MOF-Based Nanosheet Film via Binder-Free Drop-Casting Route: A Highly Efficient Urea-Electrolysis Catalyst

Developing efficient electrocatalysts for urea oxidation reaction (UOR) can be a promising alternative strategy to substitute the sluggish oxygen evolution reaction (OER), thereby producing hydrogen at a lower cell-voltage. Herein, we synthesized a binder-free thin film of ultrathin sheets of bimetallic Cu-Fe-based metal–organic frameworks (Cu/Fe-MOFs) on a nickel foam via a drop-casting route. In addition to the scalable route, the drop-casted film-electrode demonstrates the lower UOR potentials of 1.59, 1.58, 1.54, 1.51, 1.43 and 1.37 V vs. RHE to achieve the current densities of 2500, 2000, 1000, 500, 100 and 10 mA cm⁻², respectively. These UOR potentials are relatively lower than that acquired by the pristine Fe-MOF-based film-electrode synthesized via a similar route. For example, at 1.59 V vs. RHE, the Cu/Fe-MOF electrode exhibits a remarkably ultra-high anodic current density of 2500 mA cm⁻², while the pristine Fe-MOF electrode exhibits only 949.10 mA cm⁻². It is worth noting that the Cu/Fe-MOF electrode at this potential exhibits an OER current density of only 725 mA cm⁻², which is far inconsequential as compared to the UOR current densities, implying the profound impact of the bimetallic cores of the MOFs on catalyzing UOR. In addition, the Cu/Fe-MOF electrode also exhibits a long-term electrochemical robustness during UOR.

Co-Ni Layered Double Hydroxide for the Electrocatalytic Oxidation of Organic Molecules: An Approach to Lowering the Overall Cell Voltage for the Water Splitting Process

Electrocatalytic oxidation of simple organic molecules offers a promising strategy to combat the sluggish kinetics of the water oxidation reaction (WOR). The low potential requirement, inhibition of the crossover of gases, and formation of value-added products at the anode are benefits of the electrocatalytic oxidation of organic molecules. Herein, we developed cobalt-nickel-based layered double hydroxide (LDH) as a robust material for the electrocatalytic oxidation of alcohols and urea at the anode, replacing the WOR. A facile synthesis protocol to form LDHs with different ratios of Co and Ni is adapted. It demonstrates that the reactants could be efficiently oxidized to concomitant chemical products at the anode. The half-cell study shows an onset potential of 1.30 V for benzyl alcohol oxidation reaction (BAOR), 1.36 V for glycerol oxidation reaction (GOR), 1.33 V for ethanol oxidation reaction (EOR), and 1.32 V for urea oxidation reaction (UOR) compared with 1.53 V for WOR. Notably, the hybrid electrolyzer in a full-cell configuration significantly reduces the overall cell voltage at a 20 mA cm^-2 current density by ∼15% while coupling with the BAOR, EOR, and GOR and ∼12% with the UOR as the anodic half-cell reaction. Furthermore, the efficiency of hydrogen generation remains unhampered with the types of oxidation reactions (alcohols and urea) occurring at the anode. This work demonstrates the prospects of lowering the overall cell voltage in the case of a water electrolyzer by integrating the hydrogen evolution reaction with suitable organic molecule oxidation.

Hexagonal NiMoO4-MoS2 nanosheet heterostructure as a bifunctional electrocatalyst for urea oxidation assisted overall water electrolysis

A hexagonal NiMoO4-MoS2 nanosheet heterostructure on nickel foam (NiMoO4-MoS2/NF) was synthesized by simple hydrothermal and annealing treatment.

Hierarchical Structure of CuO Nanowires Decorated with Ni(OH)2 Supported on Cu Foam for Hydrogen Production via Urea Electrocatalysis

Owing to the low theoretical potential of the urea oxidation reaction (UOR), urea electrolysis is an energy-saving technique for the generation of hydrogen. Herein, a hierarchical structure of CuO nanowires decorated with nickel hydroxide supported on 3D Cu foam is constructed. Combined theoretical and experimental analyses demonstrate the high reactivity and selectivity of CuO and Ni(OH)₂ toward the UOR instead of the oxygen evolution reaction. The hierarchical structure creates a synergistic effect between the two highly active sites, enabling an exceptional UOR activity with a record low potential of 1.334 V (vs the reversible hydrogen electrode) to reach 100 mA cm^-2 and a low Tafel slope of 14 mV dec^-1 in 1 m KOH and 0.5 m urea electrolyte. Assembling full urea electrolysis driven by this developed UOR electrocatalyst as the anode and a commercial Pt/C electrocatalyst as the cathode provides a current density of 20 mA cm^-2 at a cell voltage of ≈1.36 V with promising operational stability for at least 150 h. This work not only enriches the UOR material family but also significantly advances energy-saving hydrogen production.

Ni-Fe phosphide deposited carbon felt as free-standing bifunctional catalyst electrode for urea electrolysis

A free-standing catalyst electrode for the urea oxidation reaction (UOR) and hydrogen evolution reaction (HER) in a urea electrolysis cell was synthesized by electroplating a Ni-Fe alloy onto carbon felt, followed by phosphidation (P-NiFe@CF). The prepared P-NiFe@CF catalyst consisted of Ni5P4, NiP2, and FeP with 3D flower-like P-NiFe architecture on CF. P-NiFe@CF exhibited excellent electrocatalytic activity for the UOR (demanding only 1.39 V (vs. RHE) to achieve 200 mA cm-2), and for the HER with a low overpotential of 0.023 V (vs. RHE) at 10 mA cm-2, indicating its feasibility as a bifunctional catalyst electrode for urea electrolysis. A urea electrolysis cell with P-NiFe@CF as both the free-standing anode and cathode generated a current density of 10 mA cm-2 at a cell potential of 1.37 V (vs. RHE), which is considerably lower than that of water electrolysis, and also lower than previously reported values. The results indicate that the P-NiFe@CF catalyst electrodes can be used as free-standing bifunctional electrodes for urea electrolyzers.

Facile fabrication of bifunctional SnO-NiO heteromixture for efficient electrocatalytic urea and water oxidation in urea-rich waste water

Heterostructured transition metal oxide hybrid have more attention in energy saving and environmental related field due to their higher electro-catalytic activity. In this work, we demonstrated SnO decorated with NiO nanocrystal electrocatalyst is successfully synthesized through solvothermal method and well characterized by scanning electron microscope, transmission electron microscope, X-ray diffraction and X-ray photoelectron spectroscopy. Physical characterizations confirm that spherical shape of SnO nanoparticles are homogeneously dispersed on the surface of NiO. The kinetic study of catalytic performance towards urea oxidation reaction were measured by liner sweep voltammetry and chronoamprometry. As proposed catalyst to facilitate the rate of urea oxidation reaction can increase by SnO doped NiO catalyst. The urea oxidation on SnO-NiO nanostructured modified electrode exhibits lower onset potential of 1.12 V and enhancement of current with tafel slope of 150 mV dec^-1. The obtained results demonstrated the synthesized SnO-NiO anode material could be promising electrode for urea-rich containing wastewater remediation and hydrogen production from wastewater.

Self-standing SnS nanosheet array: a bifunctional binder-free thin film catalyst for electrochemical hydrogen generation and wastewater treatment

Hydrogen generation during wastewater treatment has remained a long-standing challenge for the environment preservation welfare. In the present work, we have fabricated a promising bifunctional thin film-based catalyst for hydrogen generation with concurrent wastewater treatment. The prepared catalyst film is a vertically oriented thin SnS (tin monosulfide) nanosheet array on a Ni-foam (SnS/NF) obtained via a solution process, demonstrating a promising electrocatalytic activity towards the generation of green H₂ fuel at the cathodic side and the decomposition of urea waste at the anodic side. Notably, while assembling two identical electrodes as cathode and anode together with a reference electrode (i.e., SnS/NF∥SnS/NF vs. RHE assembly) in 1 M KOH aqueous electrolyte containing 0.33 M urea, the electrolyzer electrolyzed urea at a lower cell potential of 1.37 and 1.43 V (vs. RHE) to deliver a current density of 10 mA cm^-2 and 50 mA cm^-2, respectively, for the decomposition of urea at the anodic SnS/NF electrode and green hydrogen fuel generation at the cathodic SnS/NF electrode. This activity on electrocatalytic urea decomposition lies within the best performance to those of the previously reported sulfide-based and other catalytic materials. The promising catalytic activities of the SnS catalyst film are attributed to its combined effect of self-standing nanosheet array morphology and high crystallinity, which provides abundant active sites and a facile charge transfer path between the nanosheet arrays and the electrolyte. Thus, the present work offers a green avenue to the waste-urea treatment in water and sustainable hydrogen energy production.

Promoting urea oxidation and water oxidation through interface construction on a CeO2@CoFe2O4 heterostructure

Spinel ferrites are considered practical and promising oxygen evolution reaction (OER) and urea oxidation reaction (UOR) electrocatalysts because of their advantages in the adsorption and activation of electrocatalytic substances. A CeO₂ functional metal oxide was used to modify a spinel oxide in order to further improve the electrocatalytic performance of the spinel oxide. In this work, a CeO₂@CoFe₂O₄/NF hybrid nanostructure was synthesized for the first time by typical hydrothermal and calcination methods. In an alkaline medium, CeO₂@CoFe₂O₄/NF displays superior OER activity and needs an overpotential of 213 mV to deliver a current density of 100 mA cm^-2, which makes it one of the most active catalysts reported so far. In addition, the as-prepared CeO₂@CoFe₂O₄/NF material needs a potential of 1.40 V at the same current density in 1.0 M KOH with 0.5 M urea, which displays superior UOR activity. The CeO₂@CoFe₂O₄/NF catalyst also displays good durability and the performance of the electrode is negligibly attenuated at a large current intensity of 125 mA cm^-2. Experimental results demonstrate that the activity of the CeO₂@CoFe₂O₄/NF catalyst is ascribed to the exposure of more active centers and a faster electron transfer rate. This work develops a novel method for exploiting Earth-abundant, robust and environmentally friendly OER and UOR electrocatalysts.

Ni-Co-B nanoparticle decorated carbon felt by electroless plating as a bi-functional catalyst for urea electrolysis

A free-standing catalyst electrode for urea electrolysis was synthesized by electroless plating of NiCoB alloy onto a flexible carbon felt. The synthesized NiCoB@C catalyst exhibited porous and partially amorphous metallic structure depending on its composition, as analysed by XRD, XPS, and TEM; thus, NiCoB@C catalyst showed a high catalytic activity for urea oxidation reaction as well as hydrogen evolution reaction. The required cell voltage in the electrolysis cell with NiCoB@C as anode and cathode was as low as 1.34 V for the current densities 10 mA cm^-2. Similar performance of the urea electrolysis for H₂ production using 0.33 M urea and a fresh urine in 1 M KOH was observed. The result indicated that NiCoB could be incorporated on to carbon felt by electroless plating, and it could be used as free-standing bifunctional electrodes for urea electrolysis using urea as well as urine.

A three-dimensional nanostructure of NiFe(OH) X nanoparticles/nickel foam as an efficient electrocatalyst for urea oxidation

Developing high-performance electrocatalysts for urea oxidation reaction (UOR) can not only solve the problem of environmental pollution, but also solve the problem of the energy crisis by producing hydrogen for electrodes. The preparation of porous three-dimensional nanostructures as efficient electrocatalysts has become important work. Here, we developed a novel three-dimensional (3D) nanostructure of NiFe(OH) X nanoparticles/nickel foam with a high active area by a simple electroplating method and a subsequent treatment with ferric ion solution. This structure shows much greater UOR activity than the control sample (Ni/Ni foam) with the potential of 1.395 V (vs. RHE) (with an overpotential of 1.025 V) for driving the current density of 100 mA cm-2 in 1.0 M KOH electrolyte with 0.33 M urea. This work not only provides rapid and large-scale preparation of a three-dimensional nanostructure, but also gives a new way to design and obtain high-performance electrocatalysts.

Metal-Organic Polymer-Derived Interconnected Fe-Ni Alloy by Carbon Nanotubes as an Advanced Design of Urea Oxidation Catalysts

The electrochemical urea oxidation reaction (UOR) is considered as a promising renewable source for harvesting energy from waste. We report a new synthetic design approach to produce an iron-nickel alloy nanocatalyst from a metal-organic polymer (MOP) by a single-step carbonization process at 500 °C, thus forming a core-shell of iron-nickel-coated carbon (C@FeNi) nanostructures wired by embedded carbon nanotubes (CNTs) (CNT/C@FeNi). Powder X-ray diffraction confirmed the formation of metallic FeNi₃ alloy nanoparticles (∼20 to 28 nm). Our experimental results showed that MOP containing CNTs acquired an interconnected hierarchical topology, which prevented the collapse of its microstructure during pyrolysis. Hence, CNT/C@FeNi shows higher porosity (10 times) than C@FeNi. The electrochemical UOR in alkaline electrolytes on these catalysts was studied using cyclic voltammetry (CV). The result showed a higher anodic current (3.5 mA cm^-2) for CNT/C@FeNi than for C@FeNi (1.1 mA cm^-2) at 1.5 V/RHE. CNT/C@FeNi displayed good stability in chronoamperometry experiments and a lower Tafel slope (33 mV dec^-1) than C@FeNi (41.1 mV dec^-1). In this study, CNT/C@FeNi exhibits higher exchange current density (3.2 μA cm^-2) than does C@FeNi (2 μA cm^-2). The reaction rate orders of CNT/C@FeNi and C@FeNi at a kinetically controlled potential of 1.4 V/RHE were 0.5 and 0.9, respectively, higher than the 0.26 of β-Ni(OH)₂, Ni/Ni(OH)₂ electrodes. The electrochemical impedance result showed a lower charge-transfer resistance for CNT/C@FeNi (61 Ω·cm^-2) than for C@FeNi (162 Ω·cm^-2), due to faster oxidation kinetics associated with the CNT linkage. Moreover, CNT/C@FeNi exhibited a lower Tafel slope and resistance and higher heterogeneity (25.2 × 10^-5 cm s^-1), as well as relatively high faradic efficiency (68.4%) compared to C@FeNi (56%). Thus, the carbon-coated FeNi₃ core connected by CNT facilitates lower charge-transfer resistance and reduces the UOR overpotential.

Cobalt-modified 2D porous organic polymer for highly efficient electrocatalytic removal of toxic urea and nitrophenol

The urea oxidation reaction (UOR) and nitrophenol reduction are safe and key limiting reactions for sustainable energy conversion and storage. Urea and nitrophenol are abundant in industrial and agricultural wastes, human wastewater, and in the environment. Catalytic oxidative and reductive removal is the most effective process to remove urea and 4-nitrophenol from the environment, necessary to protect human health. 2D carbon-supported, cobalt nanoparticle-based materials are emerging catalysts for nitrophenol reduction and as an anode material for the UOR. In this work, cobalt modified on a porous organic polymer (CoPOP) was synthesized and carbonized at 400 and 600 °C. The formation of CoPOP was confirmed by FT-IR spectroscopy, the 2D graphitic layer and amorphous carbon with cobalt metal by TEM, SEM, and PXRD, and the elemental composition by TEM mapping, EDX, and XPS. The catalytic activity for the 4-nitrophenol reduction was studied and the related electrocatalytic UOR was scientifically evaluated. The catalytic activity toward the reduction of 4-NP to 4-AP was tested with the addition of NaBH₄; CoPOP-3 exhibited enhanced activity at a rate of 0.069 min^-1. Furthermore, LSV investigated the catalytic activity of materials toward UOR, producing hydrogen gas, the products of which were analyzed via gas chromatography. Among the electrocatalysts studied, CoPOP-2 exhibited a lower onset potential, and the Tafel slope was 1.34 V and 80 mV dec^-1. This study demonstrates that cobalt metal-doped porous organic polymers can be used as efficient catalysts to remove urea and nitrophenol from wastewater.

Construction of self-supporting, hierarchically structured caterpillar-like NiCo2S4 arrays as an efficient trifunctional electrocatalyst for water and urea electrolysis

In this study, we have developed intriguing self-supporting caterpillar-like spinel NiCo2S4 arrays with a hierarchical structure of nanowires on a nanosheet skeleton, which can be used as a self-supporting trifunctional electrocatalyst for the oxygen evolution reaction (OER), hydrogen evolution reaction (HER) and urea oxidation reaction (UOR). The caterpillar-like NiCo precursor arrays are first in situ grown on carbon cloth (NiCo2O4/CC) by a facile hydrothermal reaction, which is followed by an anion exchange process (or sulfuration treatment) with Na2S to form self-supporting spinel NiCo2S4 arrays (NiCo2S4/CC) with a roughened nanostructure. Taking advantage of the bimetallic synergistic effect, the unique hierarchical nanostructure, and the self-supporting nature, the resultant NiCo2S4/CC electrode exhibits high activities toward the OER, HER and UOR, which are highly superior to the monometallic counterparts of NiS nanosheets and Co9S8 nanowires on a carbon cloth substrate. The comparison of the three electrodes also indicates that the hierarchically structured bimetallic electrode combines the morphological and structural characteristics of monometallic Ni-based nanosheets and Co-based nanowires. When assembling a two-electrode electrolytic cell with NiCo2S4/CC as both the anode and cathode, an applied cell voltage of only 1.66 V is required to deliver a current density of 10 mA cm-2 in water electrolysis. By using the same two-electrode setup, the applied voltage for urea electrolysis is further reduced to 1.45 V that produces hydrogen at the cathode with the same current density. This study paves the way for exploring the feasibility of future less energy-intensive and large-scale hydrogen production.

Electrooxidation of Urea in Alkaline Solution Using Nickel Hydroxide Activated Carbon Paper Electrodeposited from DMSO Solution

Electrooxidation of urea plays a substantial role in the elimination of urea-containing wastewater and industrial urea. Here, we report the electrodeposition of nickel hydroxide catalyst on commercial carbon paper (CP) electrodes from dimethyl sulphoxide solvent (Ni(OH)2-DMSO/CP) for urea electrooxidation under alkaline conditions. The physicochemical features of Ni(OH)2-DMSO/CP catalysts using scanning electron microscopy and X-ray photoelectron spectroscopy revealed that the Ni(OH)2-DMSO/CP catalyst shows nanoparticle features, with loading of <1 wt%. The cyclic voltammetry and electrochemical impedance spectroscopy revealed that the Ni(OH)2-DMSO/CP electrode has a urea oxidation onset potential of 0.33 V vs. Ag/AgCl and superior electrocatalytic performance, which is a more than 2-fold higher activity in comparison with the counterpart Ni(OH)2 catalyst prepared from the aqueous electrolyte. As expected, the enhancement in electrocatalytic activity towards urea was associated with the superficial enrichment in the electrochemically active surface area of the Ni(OH)2-DMSO/CP electrodes. The results might be a promising way to activate commercial carbon paper with efficient transition metal electrocatalysts, for urea electrooxidation uses in sustainable energy systems, and for relieving water contamination.

Hierarchical NiCo pearl strings as efficient electrocatalysts for urea electrooxidation

A NiCo alloy with a hierarchical pearl string architecture demonstrates excellent catalytic performance towards the alkaline urea oxidation reaction.

Superior catalytic activity of α-Ni(OH)2 for urea electrolysis

α-Ni(OH)₂ exhibits a higher intrinsic UOR catalytic activity and durable stability in comparison with its nickel hydroxide counterpart β-Ni(OH)₂.

Hollow bimetallic selenide derived from a hierarchical MOF-based Prussian blue analogue for urea electrolysis

PBA@MOF–Ni/Se with a nanocube structure grown on a flower-shaped MOF–Ni template exhibits better performance in urea electrolysis.

Partial S substitution activates NiMoO4 for efficient and stable electrocatalytic urea oxidation

Achieving a profound understanding of the reaction kinetics of a catalyst by modulating its electronic structure is significant. Herein, we present a scalable approach to achieving a spatially partial substitution of S into NiMoO₄. The increase in active components in a true Ni³⁺ oxidation state as a result of optimizing the coordination environment greatly improved urea oxidation activity.