Rational design, synthesis, adsorption principles and applications of metal oxide adsorbents: a review

Sodium Alginate/UiO-66-NH2 Nanocomposite for Phosphate Removal

Environmental pollution of phosphorus is becoming increasingly concerning, and phosphate removal from water has become an important issue for controlling eutrophication. Modified metal-organic framework (MOF) materials, such as UiO-66-NH2, are promising adsorbents for phosphate removal in aquatic environments due to their high specific surface area, high porosity, and open active metal sites. In this study, a millimeter-sized alginate/UiO-66-NH2 composite hydrogel modified by polyethyleneimine (UiO-66-NH2/SA@PEI) was prepared. The entrapping of UiO-66-NH2 in the alginate microspheres and its modification with PEI facilitate easy separation in addition to enhanced adsorption properties. The materials were characterized by SEM, FTIR, XRD, and BET. Static, dynamic, and cyclic adsorption experiments were conducted under different pH, temperature, adsorbent dosage, and initial concentration conditions to assess the phosphate adsorption ability of UiO-66-NH2/SA@PEI. Under optimal conditions of 65 °C and pH = 2, 0.05 g UiO-66-NH2/SA@PEI adsorbed 68.75 mg/g, and the adsorption rate remained at 99% after five cycles of UiO-66-NH2/SA@PEI. These results suggest that UiO-66-NH2/SA@PEI composite materials can be used as an effective adsorbent for phosphate removal from wastewater.

Recent Advancements in the Field of Chitosan/Cellulose-Based Nanocomposites for Maximizing Arsenic Removal from Aqueous Environment

Water remediation, acknowledged as a significant scientific topic, guarantees the safety of drinking water, considering the diverse range of pollutants that can contaminate it. Among these pollutants, arsenic stands out as a particularly severe threat to human health, significantly compromising the overall quality of life. Despite widespread awareness of the harmful effects of arsenic poisoning, there remains a scarcity of literature on the utilization of biobased polymers as sustainable alternatives for comprehensive arsenic removal in practical concern. Cellulose and chitosan, two of the most prevalent biopolymers in nature, provide a wide range of potential benefits in cutting-edge industries, including water remediation. Nanocomposites derived from cellulose and chitosan offer numerous advantages over their larger equivalents, including high chelating properties, cost-effective production, strength, integrity during usage, and the potential to close the recycling loop. Within the sphere of arsenic remediation, this Review outlines the selection criteria for novel cellulose/chitosan-nanocomposites, such as scalability in synthesis, complete arsenic removal, and recyclability for technical significance. Especially, it aims to give an overview of the historical development of research in cellulose and chitosan, techniques for enhancing their performance, the current state of the art of the field, and the mechanisms underlying the adsorption of arsenic using cellulose/chitosan nanocomposites. Additionally, it extensively discusses the impact of shape and size on adsorbent efficiency, highlighting the crucial role of physical characteristics in optimizing performance for practical applications. Furthermore, this Review addresses regeneration, reuse, and future prospects for chitosan/cellulose-nanocomposites, which bear practical relevance. Therefore, this Review underscores the significant research gap and offers insights into refining the structural features of adsorbents to improve total inorganic arsenic removal, thereby facilitating the transition of green-material-based technology into operational use.

Characterization of phosphate modified red mud-based composite materials and study on heavy metal adsorption

In this paper, Bayer red mud (RM) and lotus leaf powder (LL) were used as the main materials, and KH2PO4 was added to modify the material. Under the condition of high-temperature carbonization, RMLL was prepared and phosphate modified red mud matrix composite (PRMLL) was prepared based on KH2PO4 modification, which can effectively remove Pb2+ from water. The optimum preparation and application conditions were determined through orthogonal experiment: dosage 0.1g, ratio 1:1, and temperature 600 °C. The effects of pH, dosage, and initial concentration on the adsorption of Pb2+ were studied. The pseudo-first-order, pseudo-second-order, and Elovich kinetic models were fitted to the experimental data. It was found that RMLL and PRMLL were more consistent with the pseudo-second-order kinetic model and chemisorption. Langmuir, Freundlich, Timkin, and Dubinin-Radushkevich isothermal adsorption models were used to fit the experimental data. It was found that RMLL and PRMLL were more consistent with Langmuir model. In addition, the maximum adsorption capacity of RMLL and PRMLL was 188.1 mg/g and 213.4 mg/g, respectively. It is larger than the adsorption capacity of their monomers. Therefore, the use of RMLL and PRMLL as the removal of Pb2+ from water is a potential application material.

Selective Adsorption of Sr(II) from Aqueous Solution by Na3FePO4CO3: Experimental and DFT Studies

The efficient segregation of radioactive nuclides from low-level radioactive liquid waste (LLRW) is paramount for nuclear emergency protocols and waste minimization. Here, we synthesized Na3FePO4CO3 (NFPC) via a one-pot hydrothermal method and applied it for the first time to the selective separation of Sr2+ from simulated LLRW. Static adsorption experimental results indicated that the distribution coefficient Kd remained above 5000 mL·g-1, even when the concentration of interfering ions was more than 40 times that of Sr2+. Furthermore, the removal efficiency of Sr2+ showed no significant change within the pH range of 4 to 9. The adsorption of Sr2+ fitted the pseudo-second-order kinetic model and the Langmuir isotherm model, with an equilibrium time of 36 min and a maximum adsorption capacity of 99.6 mg·g-1. Notably, the adsorption capacity was observed to increment marginally with an elevation in temperature. Characterization analyses and density functional theory (DFT) calculations elucidated the adsorption mechanism, demonstrating that Sr2+ initially engaged in an ion exchange reaction with Na+. Subsequently, Sr2+ coordinated with four oxygen atoms on the NFPC (100) facet, establishing a robust Sr-O bond via orbital hybridization.

Particulate bioaerogels for respiratory drug delivery

The bioaerogel microparticles have been recently developed for respiratory drug delivery and attract fast increasing interests. These highly porous microparticles have ultralow density and hence possess much reduced aerodynamic diameter, which favour them with greatly enhanced dispersibility and improved aerosolisation behaviour. The adjustable particle geometric dimensions by varying preparation methods and controlling operation parameters make it possible to fabricate bioaerogel microparticles with accurate sizes for efficient delivery to the targeted regions of respiratory tract (i.e. intranasal and pulmonary). Additionally, the technical process can provide bioaerogel microparticles with the opportunities of accommodating polar, weak polar and non-polar drugs at sufficient amount to satisfy clinical needs, and the adsorbed drugs are primarily in the amorphous form that potentially can facilitate drug dissolution and improve bioavailability. Finally, the nature of biopolymers can further offer additional advantageous characteristics of improved mucoadhesion, sustained drug release and subsequently elongated time for continuous treatment on-site. These fascinating features strongly support bioaerogel microparticles to become a novel platform for effective delivery of a wide range of drugs to the targeted respiratory regions, with increased drug residence time on-site, sustained drug release, constant treatment for local and systemic diseases and anticipated better-quality of therapeutic effects.

Composite starch films as green adsorbents for removing benzo[a]pyrene from smoked sausages

Benzo[a]pyrene (BaP), which is emitted during the processing of smoked sausages, accumulates in sausages and poses a serious threat to human health. This study focused on the removal of BaP from sausages and accompanying particulate matter (PM) during the smoking of sausages by films formed by combining corn starch (CS) with K-carrageenan (KC)/sodium alginate (SA). Initially, the effects of different additions of KC and SA on the rheological analysis, thermogravimetric analysis (TGA) and film-forming properties of the composite films were investigated. The BaP reduction capacities of CS-KC and CS-SA composite films in sausage were 41.1%-47.0% and 54.2%-56.5%, respectively, because the three-dimensional mesh structure of the composite films provided a large number of adsorption sites. Finally, kinetic studies demonstrated that BaP control in composite films is mainly achieved by intraparticle diffusion. Therefore, due to its excellent recyclability and biodegradability, composite starch film has a promising application in smoked meat products.

Innovations and challenges in adsorption-based wastewater remediation: A comprehensive review

Water contamination is an escalating emergency confronting communities worldwide. While traditional adsorbents have laid the groundwork for effective water purification, their selectivity, capacity, and sustainability limitations have driven the search for more advanced solutions. Despite many technological advancements, economic, environmental, and regulatory hurdles challenge the practical application of advanced adsorption techniques in large-scale water treatment. Integrating nanotechnology, advanced material fabrication techniques, and data-driven design enabled by artificial intelligence (AI) and machine learning (ML) have led to a new generation of optimized, high-performance adsorbents. These advanced materials leverage properties like high surface area, tailored pore structures, and functionalized surfaces to capture diverse water contaminants efficiently. With a focus on sustainability and effectiveness, this review highlights the transformative potential of these advanced materials in setting new benchmarks for water purification technologies. This article delivers an in-depth exploration of the current landscape and future directions of adsorbent technology for water remediation, advocating for a multidisciplinary approach to overcome existing barriers in large-scale water treatment applications.

Green synthesized Cu-doped CeO2nanoparticles for Congo red dye adsorption and antibacterial action

The removal of pollutants from water bodies is crucial for the well-being of humanity and is a topic of global research. Researchers have turned their attention to green synthesized nanoparticles for wastewater treatment due to their eco-friendly nature, biocompatibility, and cost-effectiveness. This work demonstrates the efficient removal of organic dye and both gram-positive and gram-negative bacteria from water bodies using copper-doped cerium oxide nanoparticles synthesized withMurraya Koenigiiextract. Characterized via various methods, the 15% copper doped cerium oxide nanoparticles (Cu 15% NPs) exhibited maximum Congo red dye adsorption (98% degradation in 35 min). Kinetic analysis favoured a pseudo-second-order model, indicating the chemical nature of adsorption. Equilibrium adsorption isotherms aligned with the Langmuir model, indicating homogenous monolayer dye adsorption on the doped adsorbent. The maximum uptake of adsorbate,Qmobtained from Langmuir model for Cu 15% NPs was 193 mg g-1. The study also showed enhanced antibacterial activity againstBacillus subtilis, Staphylococcus aureus, Escherichia coliandPseudomonas aeruginosafor Cu-doped ceria, attributed to generation of reactive oxygen species (ROS) induced by the redox cycling between Ce3+and Ce4+. This substantiated that the green synthesized copper doped cerium oxide nanoparticles are potential candidates for adsorptive removal of Congo red dye and as antibacterial agents.

A critical and comprehensive review of the current status of 17β-estradiol hormone remediation through adsorption technology

Even at low concentrations, steroid hormones pose a significant threat to ecosystem health and are classified as micropollutants. Among these, 17β-estradiol (molecular formula: C18H24O2; pKa = 10.46; Log Kow = 4.01; solubility in water = 3.90 mg L-1 at 27 °C; molecular weight: 272.4 g mol-1) is extensively studied as an endocrine disruptor due to its release through natural pathways and widespread use in conventional medicine. 17β-estradiol (E2) is emitted by various sources, such as animal and human excretions, hospital and veterinary clinic effluents, and treatment plants. In aquatic biota, it can cause issues ranging from the feminization of males to inhibiting plant growth. This review aims to identify technologies for remediating E2 in water, revealing that materials like graphene oxides, nanocomposites, and carbonaceous materials are commonly used for adsorption. The pH of the medium, especially in acidic to neutral conditions, affects efficiency, and ambient temperature (298 K) supports the process. The Langmuir and Freundlich models aptly describe isothermal studies, with interactions being of a low-energy, physical nature. Adsorption faces limitations when other ions coexist in the solution. Hybrid treatments exhibit high removal efficiency. To mitigate global E2 pollution, establishing national and international standards with detailed guidelines for advanced treatment systems is crucial. Despite significant advancements in optimizing technologies by the scientific community, there remains a considerable gap in their societal application, primarily due to economic and sustainable factors. Therefore, further studies are necessary, including conducting batch experiments with these adsorbents for large-scale treatment along with economic analyses of the production process.

Adsorption of Pyrene and Arsenite by Micro/Nano Carbon Black and Iron Oxide

Polycyclic aromatic hydrocarbons (PAHs) and arsenic (As) are common pollutants co-existing in the environment, causing potential hazards to the ecosystem and human health. How their behaviors are affected by micro/nano particles in the environment are still not very clear. Through a series of static adsorption experiments, this study investigated the adsorption of pyrene and arsenite (As (III)) using micro/nano carbon black and iron oxide under different conditions. The objectives were to determine the kinetics and isotherms of the adsorption of pyrene and As (III) using micro/nano carbon black and iron oxide and evaluate the impact of co-existing conditions on the adsorption. The microstructure of micro/nano carbon black (C 94.03%) is spherical-like, with a diameter of 100-200 nm. The micro/nano iron oxide (hematite) has irregular rod-shaped structures, mostly about 1 µm long and 100-200 nm wide. The results show that the micro/nano black carbon easily adsorbed the pyrene, with a pseudo-second-order rate constant of 0.016 mg/(g·h) and an adsorption capacity of 283.23 μg/g at 24 h. The micro/nano iron oxide easily adsorbed As (III), with a pseudo-second-order rate constant of 0.814 mg/(g·h) and an adsorption capacity of 3.45 mg/g at 24 h. The mechanisms of adsorption were mainly chemical reactions. Micro/nano carbon black hardly adsorbed As (III), but its adsorption capability for pyrene was reduced by the presence of As (III), and this effect increased with an increase in the As (III) concentration. The adsorbed pyrene on the micro/nano black carbon could hardly be desorbed. On the other hand, the micro/nano iron oxide could hardly adsorb the pyrene, but its adsorption capability for As (III) was increased by the presence of pyrene, and this effect increased with an increase in the pyrene concentration. The results of this study provide guidance for the risk management and remediation of the environment when there is combined pollution of PAHs and As.

Phosphorus removal from water by the metal-organic frameworks (MOFs)-based adsorbents: A review for structure, mechanism, and current progress

Efficacious phosphate removal is essential for mitigating eutrophication in aquatic ecosystems and complying with increasingly stringent phosphate emission regulations. Chemical adsorption, characterized by simplicity, prominent treatment efficiency, and convenient recovery, is extensively employed for profound phosphorus removal. Metal-organic frameworks (MOFs)-derived metal/carbon composites, surpassing the limitations of separate components, exhibit synergistic effects, rendering them tremendously promising for environmental remediation. This comprehensive review systematically summarizes MOFs-based materials' properties and their structure-property relationships tailored for phosphate adsorption, thereby enhancing specificity towards phosphate. Furthermore, it elucidates the primary mechanisms influencing phosphate adsorption by MOFs-based composites. Additionally, the review introduces strategies for designing and synthesizing efficacious phosphorus capture and regeneration materials. Lastly, it discusses and illuminates future research challenges and prospects in this field. This summary provides novel insights for future research on superlative MOFs-based adsorbents for phosphate removal.

Comparing brute force to transition path sampling for gas hydrate nucleation with a flat interface: comments on time reversal symmetry

Fluid to solid nucleation is often investigated with the rare event method transition path sampling (TPS). I claim that the inherent irreversibility of solid nucleation, even at stationary conditions, calls into question TPS's applicability for determining solid nucleation mechanisms, especially for pre-critical behavior. Even when applied to a phenomenon which displays time reversal asymmetry like solid nucleation, TPS is a good means of exploring phase space and giving trends in post-critical structure, and its ability to facilitate nucleation rate and free energy calculations remains outstanding. Forward-only splitting and ratcheting methods such as forward flux sampling are more attractive for understanding nucleation mechanisms as they do not require time reversal symmetry, but at low driving forces may suffer from the same limitations as brute force: they may never make it to the first ratchet. Here I briefly summarize the TPS method and gas hydrate nucleation simulation literature, focusing on topics within both to facilitate a comparison of brute force hydrate nucleation to transition path sampling of hydrate nucleation. Perhaps anecdotally, the brute force technique results in more crystalline trajectories despite having higher driving forces than TPS. I maintain this difference is because of the inherent irreversibility of hydrate nucleation, meaning its pre-critical behavior cannot accurately be determined by the melting trajectories that comprise approximately half of the configurations in TPS's path ensemble.

Mesoporous Magnetic/Polymer Hybrid Nanoabsorbent for Rapid and Efficient Removal of Heavy Metal Ions from Wastewater

As an advanced water purification technology, magnetic nanoabsorbents are highly attractive for their sustainability, robustness, and energy efficiency. However, magnetic responsiveness and high adsorptive capacity are irreconcilable during the design and synthesis of a high-performance magnetic nanoabsorbent. Here, we address this issue by designing a kind of mesoporous magnetic polymer hybrid microspheres, where functional polymers such as polyrhodanine and polypyrrole were attached to the pore walls in the interior of mesoporous Fe3O4 microspheres through in situ polymerization. Due to the integrated large saturation magnetic moment, porous structure, and dense polymer layer, the mesoporous magnetic polymer hybrid microspheres demonstrated fast magnetic responsiveness, excellent recycling performance, and high adsorption capacities toward Pb(II) ions (189 mg g-1) for polyrhodanine and Cr(VI) ions (199 mg g-1) for polypyrrole. Furthermore, their potential application in wastewater treatment was verified by a self-made magnetic separation column, where the designed magnetic nanoabsorbent exhibits significant advantages including rapid separation of heavy metal ions and high outflow. This study provided a promising magnetic polymer hybrid nanoabsorbent for realizing efficient removal of heavy metal ions from wastewater.

Nickel and nickel oxide nanoparticle-embedded functional carbon nanofibers for lithium sulfur batteries

Lithium-sulfur (Li-S) batteries are attracting tremendous attention owing to their critical advantages, such as high theoretical capacity of sulfur, cost-effectiveness, and environment-friendliness. Nevertheless, the vast commercialisation of Li-S batteries is severely hindered by sharp capacity decay upon operation and shortened cycle life because of the insulating nature of sulfur along with the solubility of intermediate redox products, lithium polysulfides (LiPSs), in electrolytes. This work proposes the use of multifunctional Ni/NiO-embedded carbon nanofibers (Ni/NiO@CNFs) synthesized by an electrospinning technique with the corresponding heat treatment as promising free-standing current collectors to enhance the kinetics of LiPS redox reactions and to provide prolonged cyclability by utilizing more efficient active materials. The electrochemical performance of the Li-S batteries with Ni/NiO@CNFs with ∼2.0 mg cm-2 sulfur loading at 0.5 and 1.0C current densities delivered initial specific capacities of 1335.1 mA h g-1 and 1190.4 mA h g-1, retrieving high-capacity retention of 77% and 70% after 100 and 200 cycles, respectively. The outcomes of this work disclose the beneficial auxiliary effect of metal and metal oxide nanoparticle embedment onto carbon nanofiber mats as being attractively suited up to achieve high-performance Li-S batteries.

Importance of Bridging Molecular and Process Modeling to Design Optimal Adsorbents for Large-Scale CO2 Capture

ConspectusCarbon capture, utilization, and storage have been identified as key technologies to decarbonize the energy and industrial sectors. Although postcombustion CO2 capture by absorption in aqueous amines is a mature technology, the required high regeneration energy, losses due to degradation and evaporation, and corrosion carry a high economic cost, precluding this technology to be used today at the scale required to mitigate climate change. Solid adsorbent-based systems with high CO2 capacities, high selectivity, and lower regeneration energy are becoming an attractive alternative for this purpose. Conscious of this opportunity, the search for optimal adsorbents for the capture of CO2 has become an urgent task. To accurately assess the performance of CO2 separation by adsorption at the needed scale, adsorbents should be synthesized and fully characterized under the required operating conditions, and the proper design and simulation of the process should be implemented along with techno-economic and environmental assessments. Several works have examined pure CO2 single-component adsorption or binary mixtures of CO2 with nitrogen for different families of adsorbents, primarily addressing their CO2 adsorption capacity and selectivity; however, very limited data is available under other conditions and/or with impurities, mainly due to the intensive experimental (modeling) efforts required for the large number of adsorbents to be studied, posing a challenge for their assessment under the needed conditions. In this regard, molecular simulations can be employed in synergy with experiments, reliably generating missing adsorption properties of mixtures while providing understanding at the molecular level of the mechanism of the adsorption process.This Account provides an outlook on strategies used for the rational design of materials for CO2 capture from different sources from the understanding of the adsorption mechanism at the molecular level. We illustrate with practical examples from our work and others' work how molecular simulations can be reliably used to link the molecular knowledge of novel adsorbents for which limited data exist for CO2 capture adsorption processes. Molecular simulation results of different adsorbents, including MOFs, zeolites, and carbon-based and silica-based materials, are discussed, focusing on understanding the role of physical and chemical adsorption obtained from simulations and quantifying the impact of impurities in the performance of the materials. Furthermore, simulation results can be used for screening adsorbents from basic key performance indicators, such as cycling the working capacity, selectivity, and energy requirement, or for feeding detailed dynamic models to assess their performance in swing adsorption processes on the industrial scale, additionally including monetized performance indicators such as operating expenses, equipment sizes, and compression cost. Moreover, we highlight the role of molecular simulations in guiding strategies for improving the performance of these materials by functionalization with amines or creating hybrid solid materials. We show how integrating models at different scales provides a robust and reliable assessment of the performance of the adsorbent materials under the required industrial conditions, rationally guiding the search for best performers. Trends in additional computational resources that can be used, including machine learning, and perspectives on practical requirements for leveraging CO2 capture adsorption technologies on the needed scale are also discussed.

The potential of zeolite nanocomposites in removing microplastics, ammonia, and trace metals from wastewater and their role in phytoremediation

Nanocomposites are emerging as a new generation of materials that can be used to combat water pollution. Zeolite-based nanocomposites consisting of combinations of metals, metal oxides, carbon materials, and polymers are particularly effective for separating and adsorbing multiple contaminants from water. This review presents the potential of zeolite-based nanocomposites for eliminating a range of toxic organic and inorganic substances, dyes, heavy metals, microplastics, and ammonia from water. The review emphasizes that nanocomposites offer enhanced mechanical, catalytic, adsorptive, and porosity properties necessary for sustainable water purification techniques compared to individual composite materials. The adsorption potential of several zeolite-metal/metal oxide/polymer-based composites for heavy metals, anionic/cationic dyes, microplastics, ammonia, and other organic contaminants ranges between approximately 81 and over 99%. However, zeolite substrates or zeolite-amended soil have limited benefits for hyperaccumulators, which have been utilized for phytoremediation. Further research is needed to evaluate the potential of zeolite-based composites for phytoremediation. Additionally, the development of nanocomposites with enhanced adsorption capacity would be necessary for more effective removal of pollutants.

Towards engineering mitigation of leaching of Cd and Pb in co-contaminated soils using metal oxide-based aerogel composites and biochar

Applications of metal-based nanomaterials for the remediation of heavy metal (HM) contaminated environments are of great importance. The ability of metal oxide-based carbon aerogel composite to immobilize HMs in multi-metal contaminated soils has not yet been investigated, particularly under acidic conditions. Herein, we investigate the performance of metal oxides (Sr0.7 Mn0.3 Co0.5 Fe0.5O3-δ)-based carbon aerogel composite (MO-CAg) compared with coconut coil fiber biochar (CCFB) and carbon aerogel (CAg) for Cd and Pb immobilization in contaminated soil. The MO-CAg, applied at 2% (w/w), significantly decreased Pb leaching by 67-75% and Cd by 60-65%, CAg decreased Cd by 54% and Pb by 46%, while biochar decreased Cd by 40-44% and Pb by 43%. The addition of MO-CAg altered Cd and Pb geochemical fractions by increasing their residual fraction, i.e., stabilized both metals compared to the control. This presents a comprehensive elaboration on the probable reaction interactions between the MO-Cag and heavy metals, including a combination of (co)precipitation, and reduction-oxidation as the predominant mechanisms of metal stabilization with MO-CAg. Moreover, MO-CAg increased Pb and Cd stabilization in soils by strengthening the bonding between metal oxides and Cd/Pb. By imbedding MO into the CAg, in MO-CAg, the immobilization of Cd(II) and Pb(II) occurred through inner-sphere complexation, while with CCFB and CAg metals, immobilization occurred through outer-sphere complexation. MO-CAg is a promising and highly efficient material that could be recommended for the remediation of Cd- and Pb-contaminated soils in subsequent studies.

Adsorption characteristics of SO2 onto novel activated carbon fixed bed: kinetics, isotherms, thermodynamics and washing regeneration

The problem of SO2 pollution in industrial flue gas has brought great pressure to environmental governance. In this study, a new type of activated carbon fixed bed device was designed and built for flue gas desulfurization. The results showed that activated carbons (AC1-AC5) were microporous activated carbons with abundant functional groups on the surface, and the desulfurization performance was ranked as AC1 > AC2 > AC3 > AC4 > AC5. The specific surface area of AC1 was as high as 624.98 m2/g, and the maximum adsorption capacity was 29.03 mg·g-1 under the optimum reaction conditions. The Freundlich adsorption isotherm model and Bangham pore diffusion model are more suitable for describing the dynamic adsorption process of SO2 on AC1. Combined with thermodynamic research, it is shown that the adsorption process of SO2 is a spontaneous, exothermic, and chaotic reduction process, which is mainly a physical adsorption between single-layer adsorption and multi-layer adsorption. Finally, the desulfurization-washing regeneration cycle experiment results showed that the regeneration rate of AC1 increases with the washing time and washing temperature, up to 95%, which provides data reference for industrial application.

Fabrication of sodium alginate-doped carbon dot composite hydrogel and its application for La (III) adsorption and enhanced the removal of phosphorus

Adsorption is an effective method for the removal of hazardous substances from wastewater. In this work, a low-cost and environmental-friendly composite hydrogel material of sodium alginate doped with nitrogen doped carbon dots (SA@NCDs) was fabricated by impregnation for lanthanide and enhanced phosphorus adsorption in wastewater. The effects of NCDs doping amount, dosage, pH, initial solution concentration, adsorption time and temperature on the process of La (III) adsorption by SA@NCDs were investigated. The adsorption isotherms fitted to Langmuir isotherm model (R2 = 0.9970-0.9989) and the adsorption kinetics followed pseudo-second-order kinetic model (R2 = 0.9992). The maximum adsorption capacity of the adsorbent for La (III) was 217.39 mg/g according to the Langmuir model at 298.15 K. After five cycles, the removal efficiency of La (III) adsorbed by SA@NCDs was still 85.1%. Moreover, the loaded La (III) enhanced the adsorption of phosphorus. The La (III)-SA@NCDs-5 hydrogel adsorbent greatly improved the adsorption capacity for phosphorus compared with the La (III)-free adsorbent, and the adsorption amount can reach 9.64 mg-P/g. The SA@NCDs complex hydrogels for rare earth adsorption were prepared by introducing NCDs rich in amino group into SA hydrogels. The introduction of NCDs increases the adsorption sites of hydrogels, and also overcomes the problem that NCDs itself is difficult to recover in wastewater treatment applications. The lanthanide adsorbed material has a stable structure and can be used to remove phosphorus to deal with waste using the waste. It indicates the SA@NCDs hydrogel composite adsorbent have good potential for wastewater treatment.

Predicting the removal efficiency of pharmaceutical and personal care products using heated metal oxides as adsorbents based on their physicochemical characteristics

Pharmaceutical and personal care products (PPCPs) are emerging pollutants that are commonly found in the environment and exist predominantly in nondegradable forms. Several attempts have been made to remove PPCPs via conventional wastewater treatment processes; however, these processes have limitations, such as high costs and insufficient removal efficiencies. Adsorption is a promising alternative for removing PPCPs because it is inexpensive, highly reusable, and easy to operate. Therefore, this study aims to determine the contributing characteristics that can be used to predict the adsorption behaviour of PPCPs based on their physicochemical properties, with heated metal oxide adsorbents (HMOAs). HAOP (heated aluminium oxide particles) and HIOP (heated iron oxide particles) with particle sizes below 38 μm were used. Results from the Brunauer-Emmett-Teller (BET) analysis show that HIOP has higher surface area and smaller pore size (113.7 ± 26.3 m2/g and 5.4 ± 1.8 nm) than HAOP (14.5 ± 0.6 m2/g and 18.6 ± 3.1 nm), which suggest that HIOP would show superior adsorption rates compared to HAOP. The adsorption mechanism is identified based on three major physicochemical properties of PPCPs: molecular weight (M.W.), octanol-water partition coefficient (log Kow), and acid dissociation constant (pKa). The results suggest that the most dominant factor that contributes to the adsorption of PPCPs on to HMOAs is the M.W., where the larger the molecular size, the better the adsorption efficiency. The tests conducted with varying log Kow values revealed that the hydrophilicity of the adsorbent influences the adsorption performance. It was found that HIOP exhibits better removal efficiencies with hydrophilic PPCPs (up to 83%) than with hydrophobic PPCPs (48%), while HAOP exhibits better removal efficiencies with hydrophobic PPCPs (86%) than with hydrophilic PPCPs, with less than 10% removal. Unlike the M.W. and pKa values, the log Kow does not exhibit any visible trend. Therefore, the adsorption behaviour can be predicted with the M.W. and pKa values of the PPCPs, when HAOP and HIOP are used as adsorbents.

Fabrication and properties of Sn(iv) porphyrin-linked porous organic polymer for environmental applications

A robust porous organic polymer cross-linked by Sn(iv) porphyrin (SnPOP) was fabricated by reacting trans-dihydroxo-[5,15,10,20-tetrakis(phenyl)porphyrinato]tin(iv) (SnP) with fluorinated polyimide (FPI) via sol-gel formation, followed by supercritical CO2 drying. The structural and porous properties of SnPOP were characterized using FT-IR, UV-vis, and fluorescence spectroscopies, along with field-emission scanning electron microscopy and gas sorption experiments. The reaction between the SnP's oxophilic Sn(iv) center and FPI's carboxylic acid moiety resulted in a controllable cross-linked porous texture. This material features the desirable physical properties of porphyrin and exhibits mesoporous structures with a relatively high surface area. SnPOP is thermally stable at temperatures up to 600 °C and highly resistant to boiling water, strong acids, and bases, owing to its assembly via formation of covalent bonds instead of typically weaker hydrogen bonds. The modified chemical and morphological structures of SnPOP showed an impressive CO2 uptake capacity of 58.48 mg g-1 at 273 K, with a preference for CO2 over N2. SnPOP showed significant efficiency in removing pollutant dyes, such as methylene blue and methyl orange, from dye-contaminated water. Additionally, SnPOP was a photocatalyst for fabricating silver nanoparticles of regular shape and size. All these properties make SnPOP a potential candidate for environmental applications like pollutant removal, gas storage, and separation.

Adsorption of Phenoxyacetic Herbicides from Water on Carbonaceous and Non-Carbonaceous Adsorbents

The increasing consumption of phenoxyacetic acid-derived herbicides is becoming a major public health and environmental concern, posing a serious challenge to existing conventional water treatment systems. Among the various physicochemical and biological purification processes, adsorption is considered one of the most efficient and popular techniques due to its high removal efficiency, ease of operation, and cost effectiveness. This review article provides extensive literature information on the adsorption of phenoxyacetic herbicides by various adsorbents. The purpose of this article is to organize the scattered information on the currently used adsorbents for herbicide removal from the water, such as activated carbons, carbon and silica adsorbents, metal oxides, and numerous natural and industrial waste materials known as low-cost adsorbents. The adsorption capacity of these adsorbents was compared for the two most popular phenoxyacetic herbicides, 2,4-dichlorophenoxyacetic acid (2,4-D) and 2-methyl-4-chlorophenoxyacetic acid (MCPA). The application of various kinetic models and adsorption isotherms in describing the removal of these herbicides by the adsorbents was also presented and discussed. At the beginning of this review paper, the most important information on phenoxyacetic herbicides has been collected, including their classification, physicochemical properties, and occurrence in the environment.

Impact of silver-doped alumina nanocomposite on water decontamination by remodeling of biogenic waste

The main cause of various fatal diseases in humans and animals is environmental pollution. Ag-doped alumina nanocomposite was prepared using coffee husk extract with a large BET surface area of 126.58 m² g^-1 and investigated for its antibacterial potential against both bacterial strains Escherichia coli and Salmonella typhimurium, and observed as an effective sorbent for removing the water pollution dye indigo carmine (IGC). The lowest concentration of the nanocomposite and the maximum contact time required to achieve complete inhibition of bacteria present in the contaminated water, as well as the capacity of sorption of IGC, were investigated. The results showed that the minimum inhibitory concentration of the Ag-doped alumina nanocomposite was 12 µg mL^-1 for both bacterial strains, with the highest inhibition occurring in E. coli. Moreover, the nanocomposite exhibited an experimental qt of 462.7 mg g^-1 from 160 mg L^-1 IGC solution at 50 °C and followed the Langmuir model. The thermodynamic results showed that the process was endothermic, spontaneous, and physisorptive. The nanocomposite was used to fully treat water samples contaminated with 10 mg L^-1 concentrations of IGC. For six consecutive cycles, the reuse research showed an average efficiency of 95.72 ± 3.6%. Consequently, the synthesized Ag-doped alumina nanocomposite is suitable for treatments of contaminated water.

Synthesis of double-shelled periodic mesoporous organosilica nanospheres/MIL-88A-Fe composite and its elevated performance for Pb2+ removal in water

Herein, we report the synthesis of double-shelled periodic mesoporous organosilica nanospheres/MIL-88A-Fe (DSS/MIL-88A-Fe) composite through a hydrothermal method. To survey the structural and compositional features of the synthesized composite, a variety of spectroscopic and microscopic techniques, including FT-IR, XRD, BET, TEM, FE-SEM, EDX, and EDX-mapping, have been employed. A noteworthy point in this synthesis procedure is the integration of MOF with PMO to increase the adsorbent performance, such as higher specific surface area and more active sites. This combination leads to achieving a structure with an average size of 280 nm and 1.1 μm long attributed to DSS and MOF, respectively, microporous structure and relatively large specific surface area (312.87 m²/g). The as-prepared composite could be used as an effective adsorbent with a high adsorption capacity (250 mg/g) and quick adsorption time (30 min) for the removal of Pb²⁺ from water. Importantly, DSS/MIL-88A-Fe composite revealed acceptable recycling and stability, since the performance in Pb²⁺ removal from water remained above 70% even after 4 consecutive cycles.

Simple Co-Precipitation of Iron Minerals for the Removal of Phenylarsonic Acid: Insights into the Adsorption Performance and Mechanism

In this study, three kinds of iron minerals, ferrihydrite, hematite, and goethite, were prepared by a simple coprecipitation method for the adsorption and removal of phenylarsonic acid (PAA). The adsorption of PAA was explored, and the influences of ambient temperature, pH, and co-existing anions on adsorption were evaluated. The experimental results show that rapid adsorption of PAA occurs within 180 min in the presence of iron minerals, and the adsorption process conforms to a pseudo-second-order kinetic model. The isothermal adsorption of PAA by ferrihydrite, goethite, and hematite agrees with the Redlich-Peterson model. The maximum adsorption capacities of PAA are 63.44 mg/g, 19.03 mg/g, and 26.27 mg/g for ferrihydrite, goethite, and hematite, respectively. Environmental factor experiments illustrated that an alkaline environment will significantly inhibit the adsorption of PAA by iron minerals. CO₃^2-, SiO₃^2-, and PO₄^3- in the environment will also significantly reduce the adsorption performance of the three iron minerals. The adsorption mechanism was analyzed by FTIR and XPS, which indicated that ligand exchange between the surface hydroxyl group and the arsine group leads to the formation of an Fe-O-As bond, and electrostatic attraction between the iron minerals and PAA played an important role in the adsorption.

Facile degradation of chitosan-sodium alginate-chromium (III) gel in relation to leather re-tanning and filling

Natural polysaccharide hydrogel, exemplified by chitosan‑sodium alginate (CS-SA), has been prevailing in adsorption of chromium (III) (Cr(III)) containing contaminant. However, the traditional desorption of CS-SA-Cr(III) to recycle the adsorbent faces the problems including chemical desorbents secondary pollution, resource waste of the terminal CS-SA adsorbents, and tedious work of reusing the desorbed Cr(III). Herein, the adsorption product, CS-SA-Cr(III) gel, was degraded to CS/SA/Cr(III) sol and applied in leather re-tanning and filling processes directly. To achieve this goal, three degradation methods were used to transform the gel to sol. Due to the excellent overall performance of the CS/SA/Cr(III)-HMD₄ sol (obtained by the hydrothermal-mechanical degradation method for 4 h (HMD₄)), including wide size and distribution range, moderate viscosity (54 ± 3.1 mPa·s), high electronegativity (-38.6 ± 5.8 mV), and good stability, the resultant leather after re-tanning and filling by the sol achieved fascinating properties such as good thermal stability (T_s, 116.8 ± 1.8 °C; T_d, 94.2 ± 1.7 °C), mechanical performance (tensile strength, 6.9 ± 0.52 MPa; elongation at break, 95 ± 3.0 %), and superduper thickening rate (31.8 %). Moreover, the mechanism of good re-tanning and filling effects was deciphered. Therefore, this work intends to overcome the limitation of traditional desorption technology and further realizes the high-valued application of the exhausted CS-SA-Cr(III) in leather re-tanning and filling processes.

Understanding the Effect of Single Atom Cationic Defect Sites in an Al2O3 (012) Surface on Altering Selenate and Sulfate Adsorption: An Ab Initio Study

Adsorption is a promising under-the-sink selenate remediation technique for distributed water systems. Recently it was shown that adsorption induced water network re-arraignment control adsorption energetics on the α - Al 2 O 3 (012) surface. Here, we aim to elucidate the relative importance of the water network effects and surface cation identity on controlling selenate and sulfate adsorption energy using density functional theory calculations. Density functional theory (DFT) calculations predicted the adsorption energies of selenate and sulfate on nine transition metal cations (Sc-Cu) and two alkali metal cations (Ga and In) in the α - Al 2 O 3 (012) surface under simulated acidic and neutral pH conditions. We find that the water network effects had larger impact on the adsorption energy than the cationic identity. However, cation identity secondarily controlled adsorption. Most cations decreased the adsorption energy weakening the overall performance, the larger Sc and In cations enabled inner-sphere adsorption in acidic conditions because they relaxed outward from the surface providing more space for adsorption. Additionally, only Ti induced Se selectivity over S by reducing the adsorbing selenate to selenite but not reducing the sulfate. Overall, this study indicates that tuning water network structure will likely have a larger impact than tuning cation-selenate interactions for increasing adsorbate effectiveness.

Progress and opportunities for metal-organic framework composites in electrochemical sensors

Metal-organic framework composites have the advantages of large surface area, high porosity, strong catalytic efficiency and good stability, which provide a great possibility of finding excellent electrode materials for electrochemical sensors. However, MOF composites still face various challenges and difficulties, which limit their development and application. This paper reviews the application of MOF composites in electrochemical sensors, including MOF/carbon composites, MOF/metal nanoparticle composites, MOF/metal oxide composites and MOF/enzyme composites. In addition, the application challenges of MOF composites in electrochemical sensors are summarized. Finally, the application prospect for MOF composites is considered to promote the synthesis of more MOF composites with excellent properties.

Scalable Synthesis of Holey Deficient 2D Co/NiO Single-Crystal Nanomeshes via Topological Transformation for Efficient Photocatalytic CO2 Reduction

Preparation of holey, single-crystal, 2D nanomaterials containing in-plane nanosized pores is very appealing for the environment and energy-related applications. Herein, an in situ topological transformation is showcased of 2D layered double hydroxides (LDHs) allows scalable synthesis of holey, single-crystal 2D transition metal oxides (TMOs) nanomesh of ultrathin thickness. As-synthesized 2D Co/NiO-2 nanomesh delivers superior photocatalytic CO₂ -syngas conversion efficiency (i.e., V_CO of 32460 µmol h^-1 g^-1 CO and V H 2 ${V_{{{\rm{H}}_2}}}$ of 17840 µmol h^-1 g^-1 H₂ ), with V_CO about 7.08 and 2.53 times that of NiO and 2D Co/NiO-1 nanomesh containing larger pore size, respectively. As revealed in high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), the high performance of Co/NiO-2 nanomesh primarily originates from the edge sites of nanopores, which carry more defect structures (e.g., atomic steps or vacancies) than basal plane for CO₂ adsorption, and from its single-crystal structure adept at charge transport. Theoretical calculation shows the topological transformation from 2D hydroxide to holey 2D oxide can be achieved, probably since the trace Co dopant induces a lattice distortion and thus a sharp decrease of the dehydration energy of hydroxide precursor. The findings can advance the design of intriguing holey 2D materials with well-defined geometric and electronic properties.

An inclusive outlook on the fate and persistence of pesticides in the environment and integrated eco-technologies for their degradation

Intensive and inefficient exploitation of pesticides through modernized agricultural practices has caused severe pesticide contamination problems to the environment and become a crucial problem over a few decades. Due to their highly toxic and persistent properties, they affect and get accumulated in non-target organisms, including microbes, algae, invertebrates, plants as well as humans, and cause severe issues. Considering pesticide problems as a significant issue, researchers have investigated several approaches to rectify the pesticide contamination problems. Several analyses have provided an extensive discussion on pesticide degradation but using specific technology for specific pesticides. However, in the middle of this time, cleaner techniques are essential for reducing pesticide contamination problems safely and environmentally friendly. As per the research findings, no single research finding provides concrete discussion on cleaner tactics for the remediation of contaminated sites. Therefore, in this review paper, we have critically discussed cleaner options for dealing with pesticide contamination problems as well as their advantages and disadvantages have also been reviewed. As evident from the literature, microbial remediation, phytoremediation, composting, and photocatalytic degradation methods are efficient and sustainable and can be used for treatment at a large scale in engineered systems and in situ. However, more study on the bio-integrated system is required which may be more effective than existing technologies.

The potential of microalgae Dunaliella salina to treat shrimp pond wastewater in a PAN/GO membrane bioreactor

Graphene has attracted a significant amount of attention because to its excellent mechanical, electrical, thermal, and optical characteristics. In this work, a membrane bioreactor with hollow fibre PAN/GO nanocomposite was studied for the treatment of Persian Gulf shrimp pond wastewater. Dunaliella salina microalgae have been used for better treatment and the formation of sludge mass in a shorter period of treatment in the MBR system. Additionally, GO nanoparticles were used in order to improve the hydrophilicity of the membranes. Various tests, such as Pure water permeate (PWP), X-ray diffraction spectroscopy (XRD), Atomic force microscopy (AFM), Dynamic light scattering (DLS), Contact angle (CA), Scanning electronic microscopy (SEM), Fourier transform infrared substances (FTIR) were used to characterize the synthesized membranes. To evaluate the treated wastewater, several factors were evaluated, including: TP, TN, TSS, NTU, BOD, COD, EC. The contact angle was reduced by the inclusion of GO nanoparticles from 53.8° for PAN-0 to 45.4° for PAN-3. The results of FTIR analysis confirmed the synthesis of GO and showed the formation of different deposits as fouling on the surface of the prepared membranes after MBR process. Also, the removal percentage of COD and BOD₅ was over 90% for membranes with graphene oxide nanoparticles. The turbidity for all fabricated membranes were removed ∼98%. Also, very little fouling occurred in the membranes constructed with GO membranes and the maximum concentration of GO let to maximum performance regarding to the high potential of fouling control. In addition, the growth of Microalgae Dunaliella salina with shrimp wastewater was observed successfully. In conclusion, the finding of this work not only proposed a promising solution for controlling fouling in an MBR but also resulted in a benefit product, i.e. microalgae Dunaliella salina.

Recent advances in new generation nanocomposite materials for adsorption of pharmaceuticals from aqueous environment

With rapid increase in the human population, a large amount of wastewater is generated every year. The availability of fresh water is decreasing at an alarming rate due to rapid industrialization and agricultural development. Pharmaceutical drugs which are credited for improving standards of life worldwide have emerged as major water contaminants, raising global concern about their potential risk to human health and environment. The presence of pharmaceutical compounds is detected in surface water (sea, river, lakes, etc.), groundwater, effluents from municipal, hospitals, and wastewater treatment plants, and even in drinking water. Efficient removal of pharmaceutical pollutants still remains a challenging task. Many techniques, including photodegradation, photocatalysis, oxidation, reverse osmosis, biodegradation, nanofiltration, adsorption, etc., have been used for the remediation of wastewater. Adsorption of pharmaceutical compounds on nanoadsorbents, as a low-cost and feasible technology, has gained immense popularity for wastewater treatment over the last decade. Adsorption techniques can be integrated with wastewater treatment plants to achieve efficient removal on an industrial level. Herein, we review the literature on the remediation techniques used for the pharmaceutical waste treatment using carbon nanotubes, metal oxides, nanoclay, and new-generation MXenes via adsorption. These materials show excellent adsorptive properties owing to their high surface area, low cost, high porosity, easy functionalization, and high surface reactivity. The adsorption mechanism of the nanoadsorbents and their reusability as a factor of sustainability have also been included in the review. The factors affecting the adsorption, including pH, the concentration of adsorbate, ionic strength, and adsorbate dose, have also been discussed.

Understanding the adsorption of iron oxide nanomaterials in magnetite and bimetallic form for the removal of arsenic from water

Arsenic decontamination is a major worldwide concern as prolonged exposure to arsenic (>10 µg L-1) through drinking water causes serious health hazards in human beings. The selection of significant, cost-effective, and affordable processes for arsenic removal is the need of the hour. For the last decades, iron-oxide nanomaterials (either in the magnetite or bimetallic form) based adsorptive process gained attention owing to their high arsenic removal efficiency and high regenerative capacity as well as low yield of harmful by-products. In the current state-of-the-art, a comprehensive literature review was conducted focused on the applicability of iron-based nanomaterials for arsenic removal by considering three main factors: (a) compilation of arsenic removal efficiency, (b) identifying factors that are majorly affecting the process of arsenic adsorption and needs further investigation, and (c) regeneration capacity of adsorbents without affecting the removal process. The results revealed that magnetite and bimetallic nanomaterials are more effective for removing Arsenic (III) and Arsenic (V). Further, magnetite-based nanomaterials could be used up to five to six reuse cycles, whereas this value varied from three to six reuse cycles for bimetallic ones. However, most of the literature was based on laboratory findings using decided protocols and sophisticated instruments. It cannot be replicated under natural aquatic settings in the occurrence of organic contents, fluctuating pH and temperature, and interfering compounds. The primary rationale behind this study is to provide a comparative picture of arsenic removal through different iron-oxide nanomaterials (last twelve yearsof published literature) and insights into future research directions.

Sustainable synthesis of graphene sand composite from waste cooking oil for dye removal

Waste cooking oil (WCO) appears to be a potential carbonaceous source for synthesizing graphene sand composite (GSC) adsorbent in removing pollutants. This study presents a green synthesis method of GSC using WCO as a sustainable carbon source for the synthesis of GSC through the thermal graphitization method. Characterization analysis conducted on GSCWCO verified the successful coating of WCO onto the sand surface and conversion to graphene, which possessed distinct functional groups and features of graphene materials. GSCWCO adsorbent effectiveness in removing Congo Red dye through batch adsorption was studied under the influence of different initial concentrations (20 to 100 mg/L), and the optimum pH (pH 2 to 10), contact time (5 to 240 min), and temperature (25 to 45 °C) were investigated. The GSCWCO showed removal rates of 91.5% achieved at an initial dye concentration of 20 mg L-1, 1.0 g of adsorbent dosage, a temperature of 25 °C, and 150 min of contact time. The GSCWCO exhibited a maximum capacity of 5.52 mg g-1, was well-fitted to the Freundlich isotherm model with an R2 value of 0.989 and had an adsorption mechanism that followed the pseudo-second-order kinetic model. Negative values of enthalpy (ΔH) and Gibbs free energy (ΔG) revealed that CR adsorption onto GSCWCO was a spontaneous and exothermic process. The presence of functional groups on the surface of GSCWCO with such interactions (π-π attractive forces, hydrophobic forces, and hydrogen bonding) was responsible for the anionic dye removal. Regeneration of GSCWCO adsorbent declined after four cycles, possibly due to the chemisorption of dyes with GSC that resulted in inefficient adsorption. Being a waste-to-wealth product, GSCWCO possessed great potential to be used for water treatment and simultaneously benefited the environment through the effort to reduce the excessive discharge of WCO.

Room temperature synthesis of flower-like hollow covalent organic framework for efficient enrichment of microcystins

The morphology of nanomaterials is one of essential factors for their unique properties. Herein, a hollow covalent organic framework with a flower-like structure (HFH-COF) was synthesized at room temperature. The synthesized HFH-COF has a very large specific surface area, mesoporous structure, excellent chemical stability, and good crystallinity. The special morphology endowed HFH-COF with high specific surface area utilization and rapid mass transfer rate, resulting in faster equilibration time and better extraction performance than spherical COF (S-COF). Subsequently, combined with high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS), an efficient and sensitive method was established for microcystins (MCs) detection. The developed method has low detection limits (0.6-0.8 pg mL^-1), wide linear ranges (1.5-1000.0 pg mL^-1, R ≥ 0.9993), and acceptable reproducibility (RSD ≤ 7.6%, n = 6). Real biological samples were analyzed by the developed method, and trace levels of MC-YR, MC-RR and MC-LR were detected. The results indicate that the synthesized HFH-COF is an ideal sorbent for efficient extraction of MCs from complex biological samples.

Polyaniline/Bi12TiO20 Hybrid System for Cefixime Removal by Combining Adsorption and Photocatalytic Degradation

Sillenite catalysts have shown efficient photocatalytic activity for the removal of various pollutants from water in previous studies, thus enhancing their activity by combining them with other materials will be very promising for environmental applications. In this context, an interesting hybrid system containing Polyaniline (PANI) as an adsorbent and Bi12TiO20 (BTO) sillenite as a catalyst was proposed in this work. Cefixime (CFX) has been selected as a pollutant for this study, and its removal was evaluated using PANI (adsorption), PANI and BTO (combined system) and the hybrid system Bi12TiO20/Polyaniline (BTO/PANI). First, the impact of PANI adsorption was investigated on its own; after that, the solution was filtered to separate the adsorbent from the liquid in order to re-treat the solution using photocatalysis (combining adsorption with photocatalysis). At the same time, a similar technique was used involving the hybrid system BTO/PANI. The results show that the hybrid system can remove a very high Cefixime concentration of 30 mg/L, almost 100%, within only 2 h, and this is better than previous investigations. These results indicate that it is possible to combine photocatalysis and adsorption processes to control water pollution.

Preparation of lignite-loaded nano-FeS and its performance for treating acid Cr(VI)-containing wastewater

In this study, lignite-loaded nano-FeS (nFeS@Lignite) was successfully prepared by ultrasonic precipitation, and its potential for treating acid Cr(VI)-containing wastewater was explored. The results showed that the 40--80-nm rod-shaped nFeS was successfully loaded onto lignite particles, and the maximum adsorption capacity of Cr(VI) by nFeS@Lignite reached 33.08 mg∙g^-1 (reaction time = 120 min, pH = 4, temperature = 298.15 K). The adsorption process of Cr(VI) by nFeS@Lignite fitted the pseudo-second-order model and the Langmuir isotherm model, and thermodynamic results showed that the adsorption process was an endothermic process with an adsorption enthalpy of 28.0958 kJ·mol^-1. The inhibition intensity of coexisting anions on Cr(VI) removal was in the order of PO₄^3-  > NO₃^-  > SO₄^2-  > Cl^-, and the increase of ionic strength resulted in more pronounced inhibition. Electrostatic adsorption, reduction, and precipitation were synergistically engaged in the adsorption of Cr(VI) by nFeS@Lignite, among which reduction played a major role. The characterization results showed that Fe²⁺, S^2-, and Cr(VI) were converted to FeOOH, S₈, SO₄^2-, Fe₂O₃, Cr₂O₃, and Fe(III)-Cr(III) complexes. This research demonstrates that nFeS@Lignite is a good adsorbent with promising potential for application in the remediation of heavy metal-contaminated wastewater.

2,4-Dichlorophenoxyacetic acid (2,4-D) adsorptive removal by algal magnetic activated carbon nanocomposite

In the present study, ferric oxide nanoparticles impregnated with activated carbon from Ulva prolifera biomass (UPAC-Fe₂O₃) were prepared and employed to remove 2,4-Dichlorophenoxyacetic acid (2,4-D) by adsorption. The UPAC-Fe₂O₃ nanocomposite was characterized for its structural and functional properties by a variety of techniques. The nanocomposite had a jagged, irregular surface with pores due to uneven scattering of Fe₂O₃ nanoparticles, whereas elemental analysis portrayed the incidence of carbon, oxygen, and iron. XRD analysis established the crystalline and amorphous planes corresponding to the iron oxide and carbon phase respectively. FT-IR analyzed the functional groups that confirmed the integration of Fe₂O₃ nanoparticles onto nanocomposite surfaces. VSM and XPS studies uncovered the superparamagnetic nature and presence of carbon and Fe₂O_3, respectively, in the UPAC-Fe₂O₃ nanocomposite. While the surface area was 292.51 m²/g, the size and volume of the pores were at 2.61 nm and 0.1906 cm³/g, respectively, indicating the mesoporous nature and suitability of the nanocomposites that could be used as adsorbents. Adsorptive removal of 2,4-D by nanocomposite for variations in process parameters like pH, dosage, agitation speed, adsorption time, and 2,4-D concentration was studied. The adsorption of 2,4-D by UPAC-Fe₂O₃ nanocomposite was monolayer chemisorption owing to Langmuir isotherm behavior along with a pseudo-second-order kinetic model. The maximum adsorption capacity and second order rate constant values were 60.61 mg/g and 0.0405 g/mg min respectively. Thermodynamic analysis revealed the spontaneous and feasible endothermic adsorption process. These findings confirm the suitability of the synthesized UPAC-Fe₂O₃ nanocomposite to be used as an adsorbent for toxic herbicide waste streams.

The recent development of inverse vulcanized polysulfide as an alternative adsorbent for heavy metal removal in wastewater

Inverse vulcanized polysulfides have been used as low-cost and effective adsorbents to remediate heavy metals in wastewater. Inverse vulcanization introduces sustainable polysulfide synthesis by solving the rapid desulfurization problem of unstable polysulfides, and provides superior performance compared to conventional commercial adsorbents. The review discussed the brief applications of the inverse vulcanized polysulfides to remove heavy metal wastewater and emphasized the modified synthesis processes for enhanced uptake ratios. The characteristics of polysulfide adsorbents, which play a vital role during the removal process are highlighted with a proper discussion of the interaction between metal ions and polysulfides. The review paper concludes with remarks on the future outlook of these low-cost adsorbents with high selectivity to heavy metals. These polysulfide adsorbents can be prepared using a wide variety of crosslinker monomers including organic hydrocarbons, cooking oils, and agro-based waste materials. They have shown good surface area and excellent metal-binding capabilities compared to the commercially available adsorbents. Proper postmodification processes have enabled the benefits of repetitive uses of the polysulfide adsorbents. The improved surface area obtained by appropriate choice of crosslinkers, modified synthesis techniques, and regeneration through post-modification has made inverse vulcanized polysulfides capable of removing.

Cerium-Bismuth Oxides/Oxynitrates with Low Toxicity for the Removal and Degradation of Organophosphates and Bisphenols

Nanoscale cerium-bismuth oxides/oxynitrates were prepared by a scalable low-temperature method at ambient pressure using water as the sole solvent. Solid solutions were formed up to a 1:1 Ce/Bi molar ratio, while at higher doping levels, bismuth oxynitrate photocatalysts with a pronounced layered structure were formed. Bismuth caused significant changes in the structure and surface properties of nanoceria, such as the formation of defects, oxygen-containing surface groups, and Lewis and Brønsted acid sites. The prepared bifunctional adsorbents/photocatalysts were efficient in the removal of toxic organophosphate (methyl paraoxon) from water by reactive adsorption followed by photocatalytic decomposition of the parent compound and its degradation product (p-nitrophenol). Bi-doped ceria also effectively adsorbed and photodegraded the endocrine disruptors bisphenols A and S and outperformed pure ceria and the P25 photocatalyst in terms of efficiency, durability, and long-term stability. The very low toxicity of Bi-nanoceria to mammalian cells, aquatic organisms, and bacteria has been demonstrated by comprehensive in vivo/in vitro testing, which, in addition to its simple "green" synthesis, high activity, and durability, makes Bi-doped ceria promising for safe use in abatement of toxic chemicals.

Peppermint-Mediated Green Synthesis of Nano ZrO2 and Its Adsorptive Removal of Cobalt from Water

Zirconium oxide nanoparticles (ZrO2NPs) were green synthesized for the first time using an aqueous peppermint extract as a precipitating and capping agent. Addition of the extract to Zr4+ solution was followed by calcination of the resulting precipitate at 570 and 700 °C to form ZrO2NPs570 and ZrO2NPs700, respectively. These oxides were characterized using X-ray diffraction, transmission electron microscopy, and BET surface area analysis, and used as adsorbents for cobalt ions (Co2+) in water. The effects of pH, initial Co2+ concentration, ZrO2NPs mass, and contact time on adsorption efficiency were studied. Characterization results showed formation of cubic ZrO2 with average crystallite sizes (XRD data) of 6.27 and 7.26 nm for ZrO2NPs570 and ZrO2NPs700, respectively. TEM images of the two oxides exhibited nearly spherical nanoparticles and BET surface area measurements indicated the formation of mesoporous oxides having surface areas of 94.8 and 62.4 m2/g, respectively. The results of the adsorption study confirmed that the synthesized ZrO2NPs can be efficiently used for the adsorption of Co2+ from water. The uptake of Co2+ from the treated solution is favored at pH values higher than its point of zero charge (6.0). In addition, the adsorption of Co2+ by ZrO2 follows a pseudo-second order kinetics (R2 = 1.0) and can be explained by the Langmuir adsorption isotherm (R2 = 0.973).

Pharmaceutical residues: One of the significant problems in achieving 'clean water for all' and its solution

With the rapid emergence of various metabolic and multiple-drug-resistant infectious diseases, new pharmaceuticals are continuously being introduced in the market. The excess production and use of pharmaceuticals and their untreated/unmetabolized release in the environment cause the contamination of aquatic ecosystem, and thus, compromise the environment and human-health. The present review provides insights into the classification, sources, occurrence, harmful impacts, and existing technologies to curb these problems. A comprehensive detail of various biological and nanotechnological strategies for the removal of pharmaceutical residues from water is critically discussed focusing on their efficiencies, and current limitations to design improved-technologies for their lab-to-field applications. Furthermore, the review highlights and suggests the scope of integrated bionanotechnological methods for enhanced removal of pharmaceutical residues from water to fulfill the United Nations Sustainable Development Goal (UN-SDG) for providing clean potable water for all.

Adsorptive removal of multiple organic dyes from wastewater using regenerative microporous carbon: Decisive role of surface-active sites, charge and size of dye molecules

Present work addresses the synthesis of microporous activated carbon (SDAC) by a facile thermochemical conversion of teak sawdust powder. The high surface area (1999 m² g^-1), excellent microporosity (average pore size: 2.62 nm), and turbostratic carbon structure with intertwined graphitic domains make SDAC a highly efficient adsorptive material for the removal of organic pollutants. The spectroscopic analyses (FTIR, Raman, and XPS) and adsorption locator calculations revealed multiple interactions between organic dyes and SDAC adsorbent, i.e., electrostatic, π-π, n-π interactions, and hydrogen linkages. The size, chemical functionalities, aromatic rings, electronegative and heteroatoms in dye molecules, along with the surface-active sites, microstructured and textural features of SDAC adsorbent collectively governed the interaction pathways and adsorption efficiency. The calculated adsorption energy using Monte Carlo-based simulation annealing method signified faster and higher adsorption of malachite green than methylene blue dye at surface-active sites (-COOH, CO, C-OH, and π-electron-rich domains) of SDAC adsorbent, corroborating the experimental results. The batch-mode adsorptive separation results showed remarkably high adsorption efficiency (>99%) for industrial wastewater to remove cationic and anionic dyes together. The SDAC displayed significantly high adsorption of methylene blue dye (625 mg.g^-1) with excellent recyclability without measurable loss of adsorption efficiency even after ten cycles. The SDAC fixed-bed column showed a dye removal capacity of 594 mg.g^-1 at 90% breakthrough in a continuous-mode process signifying its applicability for a real-time industrial run. The excellent conformity between batch mode and fixed bed continuous column adsorption data, along with higher removal capacity and remarkable recyclability, promise the use of SDAC adsorbent for industrial wastewater treatment to remove multiple organic pollutants.

Synthesis of Novel Hierarchical Rod-like Mg-Al bimetallic oxides for enhanced removal of uranium (VI) from wastewater

As one of the most frequently used nuclides for nuclear fuel and toxic heavy metal in polluted solutions, the removal and recovery of U(VI) from wastewater is significant both for nuclear energy and human health. Herein, the novel hierarchical Mg-Al bimetallic oxides (Mg/Al-BOs) were successfully synthesized by a facile hydrothermal-lyophilization-calcination method for enhanced removal of uranium (U(VI)) from wastewater. The as-synthesized Mg/Al-BOs adsorbents were characterized by a variety of techniques including SEM-EDS, XRD, high temperature in-situ XRD, TG-DSC, N₂ adsorption-desorption isotherm and XPS. Batch experiments including the effects of pH, hydration species, interfering ions on U(VI) removal, adsorption kinetics, isotherms and recyclability were systematically studied. Results showed that calcined Mg/Al-BO-24 inherited the hierarchical structure from its hydrotalcite-like precursor and grew the bimetallic oxides of Al₂O₃/MgO into a 3D rod-like and mesoporous network with the large BET surface area (472.4 m²∙g-¹), which presented abundant binding sites on the surface and contributed to preventing the aggregation of Al₂O₃/MgO nanoparticles, allowing the fast uptake of U(VI) for equilibrium within 180 min and the significant increase of maximum adsorption capacity to 411.5 mg∙g-¹. The uptake kinetics and isotherms of U(VI) removal could be well represented by the pseudo-second-order and Langmuir models, respectively. Further, it was demonstrated that U(VI) removal by Mg/Al-BO-24 was less influenced by coexisting cations and the regeneration cycles, indicating the excellent selectivity and reusability for U(VI) by the as-prepared composites. Based on the XPS analysis results, the mechanisms for U(VI) sorption onto the Mg/Al-BO-24 were mainly ascribed to the synergistic surface complexation and electrostatic interaction. These results suggested that Mg/Al-BO-24 prepared by the method reported here was available for developing other multiple metal oxides and would be a promising material for the effective treatment of wastewater with U(VI)-contamination.