A green l-cysteine modified cellulose nanocrystals biosorbent for adsorption of mercury ions from aqueous solutions

Periodate oxidation-mediated nanocelluloses: Preparation, functionalization, structural design, and applications

In recent years, the remarkable progress in nanotechnology has ignited considerable interest in investigating nanocelluloses, an environmentally friendly and sustainable nanomaterial derived from cellulosic feedstocks. Current research primarily focuses on the preparation and applications of nanocelluloses. However, to enhance the efficiency of nanofibrillation, reduce energy consumption, and expand nanocellulose applications, chemical pre-treatments of cellulose fibers have attracted substantial interest and extensive exploration. Various chemical pre-treatment methods yield nanocelluloses with diverse functional groups. Among these methods, periodate oxidation has garnered significant attention recently, due to the formation of dialdehyde cellulose derived nanocellulose, which exhibits great promise for further modification with various functional groups. This review seeks to provide a comprehensive and in-depth examination of periodate oxidation-mediated nanocelluloses (PONCs), including their preparation, functionalization, hierarchical structural design, and applications. We believe that PONCs stand as highly promising candidates for the development of novel nano-cellulosic materials.

In Situ Construction of CdS/g-C3N4 Heterojunctions in Spent Thiolation@Wood-Aerogel for Efficient Excitation Peroxymonosulfate to Degradation Tetracycline

Pollutant treatment, hazardous solid waste conversion, and biomass resource utilization are significant topics in environmental pollution control, and simultaneously achieving them is challenging. Herein, we developed a "from waste absorbent to effective photocatalyst" upcycle strategy for nontoxic conversion of Cd(II) adsorbed on thiolation@wood-aerogel (TWA) into CdS/g-C3N4 heterojunctions through the in situ chemical deposition high-temperature carbonization combined conversion method to overcome the above problems simultaneously. We used Schiff base reaction to graft l-cysteine into dialdehyde@wood-aerogel to prepare TWA with a high Cd(II) adsorption capacity (600 mg/L, 294.66 mg/g). Subsequently, the spent Cd(II)-loaded-TWA was used as a substrate for in situ construction of Cd(II) into CdS/g-C3N4 heterojunction for activating peroxymonosulfate (PMS) under simulated sunlight [simulated solar light (SSL)], achieving efficient tetracycline (TC) degradation (20 mg/L, 95.32%). The Langmuir and pseudo-second-order models indicate single-layer chemical adsorption of Cd(II) on the TWA adsorption process. In the PMS/SSL system, CdS/g-C3N4@TWA efficiently and rapidly degraded TC via an adsorption-photocatalytic synergistic degradation mechanism. The used CdS/g-C3N4@TWA has a good biocompatibility. This study proposed design and preparation of a new type of wood aerogel absorbent and provided a novel upcycling strategy for innovative use of the spent waste adsorbent.

Nanocellulose-stabilized nanocomposites for effective Hg(II) removal and detection: a comprehensive review

Mercury pollution, with India ranked as the world's second-largest emitter, poses a critical environmental and public health challenge and underscores the need for rigorous research and effective mitigation strategies. Nanocellulose is derived from cellulose, the most abundant natural polymer on earth, and stands out as an excellent choice for mercury ion remediation due to its remarkable adsorption capacity, which is attributed to its high specific surface area and abundant functional groups, enabling efficient Hg(II) ion removal from contaminated water sources. This review paper investigates the compelling potential of nanocellulose as a scavenging tool for Hg(II) ion contamination. The comprehensive examination encompasses the fundamental attributes of nanocellulose, its diverse fabrication techniques, and the innovative development methods of nanocellulose-based nanocomposites. The paper further delves into the mechanisms that underlie Hg removal using nanocellulose, as well as the integration of nanocellulose in Hg detection methodologies, and also acknowledges the substantial challenges that lie ahead. This review aims to pave the way for sustainable solutions in mitigating Hg contamination using nanocellulose-based nanocomposites to address the global context of this environmental concern.

Quantitative Determination of Metal Ion Adsorption on Cellulose Nanocrystals Surfaces

Nanocellulose is a bio-based material that holds significant potential in the field of water purification. Of particular interest is their potential use as a key sorbent material for the removal of metal ions from solution. However, the structure of metal ions adsorbed onto cellulose surfaces is not well understood. The focus of this work is to determine quantitatively the three-dimensional distribution of metal ions of different valencies surrounding negatively charged carboxylate functionalized cellulose nanocrystals (CNCs) using anomalous small-angle X-ray scattering (ASAXS). These distributions can affect the water and ionic permeability in these materials. The data show that increasing the carboxylate density on the surface of the CNCs from 740 to 1100 mmol/kg changed the nature of the structure of the adsorbed ions from a monolayer into a multilayer structure. The monolayer was modeled as a Stern layer around the CNC nanoparticles, whereas the multilayer structure was modeled as a diffuse layer on top of the Stern layer around the nanoparticles. Within the Stern layer, the maximum ion density increases from 1680 to 4350 mmol of Rb+/(kg of CNC) with the increase in the carboxylate density on the surface of the nanoparticles. Additionally, the data show that CNCs can leverage multiple mechanisms, such as electrostatic attraction and the chaotropic effect, to adsorb ions of different valencies. By understanding the spatial organization of the adsorbed metal ions, the design of cellulose-based sorbents can be further optimized to improve the uptake capacity and selectivity in separation applications.

Removal of Toxic Lead from Wastewater by Lupinus albus Seed Hull

In this work, we address two concerns at once: waste reduction and the development of a lead removal adsorbent. The potential of Lupinus albus seed hull (LSH) powder as an efficient, innovative, and economical adsorbent for Pb(II) absorption was examined in this study. Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, and scanning electron microscopy investigations were used to determine the structural and morphological properties of the LSH adsorbent. The adsorption process was studied in batch mode with multiple process variables (adsorbent dosage of 4.0-20 g/L; solution pH of 1.5-5.5; contact time of 15-70 min). By fitting the equilibrium data to the Langmuir isotherm model, the maximum adsorption capacity of Pb(II) was 357.14 mg/g at optimized pH (5.5), LSH dose (0.4 g), and interaction time (60 min) with starting Pb(II) concentration of 50 mg L-1. As for the reaction kinetics, the pseudo-second-order model was shown to be a convenient match. LSH can be reused after four desorption/adsorption cycles and has a high potential for eliminating Pb(II) from wastewater.

Competitive adsorption behavior of typical heavy metal ions from acid mine drainage by multigroup-functionalization cellulose: qualitative and quantitative mechanism

In response to Cd, Pb, and Cu pollution in acid mine drainage (AMD), a multigroup cellulose material (TCIS) containing thiol (-SH), carboxyl (-COOH), and imine (-C = N) groups was prepared through oxidation and grafting reactions. At pH 5, the maximum Cd(II), Pb(II), and Cu(II) adsorption performances of TCIS were 53.60, 120.6, and 36.01 mg/g, respectively. In the binary system, the interaction between metal ions was mainly inhibited by competitive adsorption. Cu(II) exhibited the most fierce inhibitory effect and had a relatively stable adsorption performance. In the ternary system, the adsorption order was Cu(II) > Cd(II) > Pb(II). In density functional theory (DFT) calculations, we combined the molecular electrostatic potentials, binding energies, differential charges, and total potentials to illustrate the competitive behavior of metal ions at different binding sites. Moreover, X-ray photoelectron spectroscopy (XPS) and DFT analysis revealed that the adsorption process of TCIS was dominated by the above functional groups, which caused competitive adsorption among Cd(II), Pb(II), and Cu(II).

Adsorptive performance and mechanism exploration of l-lysine functionalized celluloses for enhanced removal of Pb(II) from aqueous medium

In this study, two novel biosorbents of l-lysine grafted cellulose (L-PCM, L-TCF) were prepared for Pb(II) removal from aqueous solutions. Various adsorption parameters were surveyed, such as adsorbent dosages, initial concentration of Pb(II), temperature and pH, using adsorption techniques. At normal temperature, less adsorbent can achieve better adsorption capacity (89.71 ± 0.27 mg g^-1 with 0.5 g L^-1 of L-PCM, 16.84 ± 0.02 mg g^-1 with 3.0 g L^-1 of L-TCF). The pH range of application for L-PCM was 4-12 and that of L-TCF was 4-13. The adsorption of Pb(II) by biosorbents went through the boundary layer diffusion stage and void diffusion stage. The adsorption mechanism was chemisorption based on multilayer heterogeneous adsorption. The pseudo-second-order model fitted the adsorption kinetics perfectly. The Freundlich isotherm model adequately described Multimolecular equilibrium relationship between Pb(II) and biosorbents; the predicted maximum adsorption capacities of the two adsorbents were 904.12 and 46.74 mg g^-1, respectively. The results showed that the adsorption mechanism was the electrostatic attraction between Pb(II) and -COOH and the complexation between Pb(II) and -NH₂. This work demonstrated that l-lysine modified cellulose-based biosorbents have great potential in the field of Pb(II) removal from aqueous solutions.

Bis-Schiff base cellulosic nanocrystals for Hg (II) removal from aqueous solution with high adsorptive capacity and sensitive fluorescent response

Mercury pollution in aqueous solutions is a severe problem in environmental protection and the contaminated water may cause serious risks to human health. Based on the constant development of adsorptive materials, adsorption technique is widely applied as an efficient and convenient approach to eliminate mercury species from waters. In this work, we report a one-pot procedure to prepare a bis-Schiff base cellulosic adsorbent to integrate the advantages of large adsorptive capacity and excellent fluorescent recognition towards mercury ions. The adsorption experiments demonstrate that sulfydryl-contained cellulosic nanocrystals exhibit specific affinity with mercury species and the adsorption capacity reaches as high as 624.8 mg/g at room temperature. Besides, the introduction of rhodamine moiety endows the material a 19 times enhancement of selective "off-on" fluorescent sensing while exposed to mercury. Additionally, the bifunctional adsorbent material shows high sensitivity towards mercury ions in aqueous solution with detection limits of as low as 8.29 × 10^-8 M for fluorescence and 5.9 × 10^-9 M for UV-vis spectrum, respectively. The fitting results of the adsorption models indicate a monolayer adsorption during the uptake of mercury ions and the removal process follows the pseudo-second order kinetics. Moreover, density functional theory studies are employed to further understand the adsorptive and responsive mechanisms.

Cellulose Nanocrystals (CNCs) and Cellulose Nanofibers (CNFs) as Adsorbents of Heavy Metal Ions

The isolation of nanocellulose has been extensively investigated due to the growing demand for sustainable green materials. Cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs), which have the same chemical composition but have different morphology, particle size, crystallinity, and other properties depending on the precursor and the synthesis method used. In comparison, CNC particles have a short rod-like shape and have smaller particle dimensions when compared to CNF particles in the form of fibers. CNC synthesis was carried out chemically (hydrolysis method), and CNF synthesis was carried out mechanically (homogenization, ball milling, and grinding), and both can be modified because they have a large surface area and are rich in hydroxyl groups. Modifications were made to increase the adsorption ability of heavy metal ions. The Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric (TG), and dynamic light scattering (DLS) can reveal the characteristics and morphology of CNCs and CNFs. The success and effectiveness of the heavy metal adsorption process are influenced by a few factors. These factors include adsorbent chemical structure changes, adsorbent surface area, the availability of active sites on the adsorbent’s surface, adsorption constants, heavy metal ionic size differences, pH, temperature, adsorbent dosage, and contact time during the adsorption process. In this review, we will discuss the characteristics of CNCs and CNFs synthesized from various precursors and methods, the modification methods, and the application of CNCs and CNFs as heavy metal ion adsorbents, which includes suitable isotherm and kinetics models and the effect of pH on the selectivity of various types of heavy metal ions.

Preparation and modification of nanocellulose and its application to heavy metal adsorption: A review

Heavy metals are a notable pollutant in aquatic ecosystems that results in many deadly diseases of the human body after enrichment through the food chain. As an environmentally friendly renewable resource, nanocellulose can be competitive with other materials at removing heavy metal ions due to its large specific surface area, high mechanical strength, biocompatibility and low cost. In this review, the research status of modified nanocellulose for heavy metal adsorbents is primarily reviewed. Two primary forms of nanocellulose are cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs). The preparation process of nanocellulose was derived from natural plants, and the preparation process included noncellulosic constituent removal and extraction of nanocellulose. Focusing on heavy metal adsorption, the modification of nanocellulose was explored in depth, including direct modification methods, surface grafting modification methods based on free radical polymerization and physical activation. The adsorption principles of nanocellulose-based adsorbents when removing heavy metals are analyzed in detail. This review may further facilitate the application of the modified nanocellulose in the field of heavy metal removal.

Cellulose: A Review of Water Interactions, Applications in Composites, and Water Treatment

Cellulose is known to interact well with water, but is insoluble in it. Many polysaccharides such as cellulose are known to have significant hydrogen bond networks joining the molecular chains, and yet they are recalcitrant to aqueous solvents. This review charts the interaction of cellulose with water but with emphasis on the formation of both natural and synthetic fiber composites. Covering studies concerning the interaction of water with wood, the biosynthesis of cellulose in the cell wall, to its dispersion in aqueous suspensions and ultimately in water filtration and fiber-based composite materials this review explores water-cellulose interactions and how they can be exploited for synthetic and natural composites. The suggestion that cellulose is amphiphilic is critically reviewed, with relevance to its processing. Building on this, progress made in using various charged and modified forms of nanocellulose to stabilize oil-water emulsions is addressed. The role of water in the aqueous formation of chiral nematic liquid crystals, and subsequently when dried into composite films is covered. The review will also address the use of cellulose as an aid to water filtration as one area where interactions can be used effectively to prosper human life.

Recent advances in nanomaterial developments for efficient removal of Hg(II) from water

"Water" contamination by mercury Hg(II) has become the biggest concern due to its severe toxicities on public health. There are different conventional techniques like ion exchange, reverse osmosis, and filtration that have been used for the elimination of Hg(II) from the aqueous solutions. Although, these techniques have some drawbacks during the remediation of Hg(II) present in water. Adsorption could be a better option for the elimination of Hg(II) from the aqueous solutions. "Conventional adsorbents" like zeolite, clay, and activated carbons are inefficient for this purpose. Recently, nanomaterials have attracted attention for the elimination of Hg(II) from the aqueous solutions due to high porosity, better surface properties, and high efficiency. In this review, a thorough discussion has been carried out on the synthesis and characterization of nanomaterials along with mechanisms involved in the elimination of Hg(II) from aqueous solutions.

Ultrahigh efficient and selective adsorption of U(VI) with amino acids-modified magnetic chitosan biosorbents: Performance and mechanism

Exploiting eco-friendly, highly controlled preparation and convenient solid-liquid separation adsorbent to separate uranium from aquatic medium is of importance and in demand. In this study, magnetic ferroferric oxide nanoparticles synthesized through a facile hydrothermal reaction was cross-linked with chitosan. The intermediate product was subsequently chemically grafting with four amino acids such as alanine, serine, glycine or L-cysteine to produce Ala-MCS, Ser-MCS, Gly-MCS and Cys-MCS. The resultants were verified by SEM, EDS, XRD, VSM, FT-IR and XPS. Adsorption of uranium with amino acids-modified magnetic chitosans were carried out. The parameters that affected the adsorption ability, selectivity toward uranium, and reusability have been illustrated. pH 6.5 was the most beneficial for the adsorption. The saturation adsorption capacity of Ala-MCS, Ser-MCS, Gly-MCS, Cys-MCS were found as 658.88 mg/g ± 1.0 %, 616.10 ± 0.3 % mg/g, 646.38 ± 1.8 % mg/g, 653.96 ± 3.4 % mg/g and 409.15 ± 4.6 % mg/g, respectively. The adsorption process was analyzed using kinetics (pseudo-first-order, pseudo-second-order and intraparticle diffusion models) and isotherms models (Langmuir and Freundlich models). The adsorption of uranium on Ala-MCS, Ser-MCS, Gly-MCS and Cys-MCS happened on monolayer and were controlled by chemisorption. The certified high adsorption amount and efficient solid-liquid separation proved amino acids-modified magnetic chitosan are promising adsorbents for removal of uranium from wastewater.

Fast and effective catalytic degradation of an organic dye by eco-friendly capped ZnS and Mn-doped ZnS nanocrystals

Undoped and manganese doped ZnS nanocrystals encapsulated with thioglycolic acid (ZnS-TGA) were synthesized and characterized with different techniques, and finally tested in the photodegradation of a methyl orange in aqueous solution under UV and sunlight irradiations. FTIR and X-ray diffraction results confirmed the functionalization of these nanocrystal surface by thioglycolic acid and the formation of crystalline structures of ZnS and Mn-doped ZnS with cubic and hexagonal phases. Calculated average size of ZnS nanocrystals was in the range of 2-3 nm. It was observed a blue shift of the absorbance threshold and the estimated bandgap energies were higher than that of Bulk ZnS thus confirming the quantum confinement effect of charge carriers. Photoluminescence spectra of ZnS nanocrystals exhibited emission in the range of 410-490 nm and the appearance of an additional emission band around 580 nm (2.13 eV) connected to the ⁴T₁ → ⁶A₁ transition of the Mn²⁺ions. Photodegradation of methylene orange with undoped and Mn-doped ZnS-TGA nanocrystals was investigated. Dye adsorption prior to photocatalysis using nanocrystals was studied via kinetic and equilibrium experiments. The maximum dye adsorption capacity on doped ZnS-TGA was ~ 26.98 mg/g. The adsorption kinetic was found to follow the pseudo-second-order kinetic model. A statistical physics model was used to analyze the equilibrium data where the calculated adsorption energy was 17-18 kJ/mol. It was concluded that the dye adsorption was associated to the hydrogen interaction where the removal process was feasible and multi-molecular at 25 °C. The photocatalytic activity of undoped ZnS nanoparticles under UV irradiation showed better efficiency than doped nanocrystals thus indicating that manganese doping generated a dropping of the photocatalytic degradation of the dye. Dye degradation efficiency of 81.37% using ZnS-TGA nanocrystals was achieved after 6 min, which indicated that ZnMnS-TGA nanocrystals may be considered an alternative low cost and environmental friendly material for facing water pollution caused by organic compounds via photodegradation processes.

Nanocellulose for Sustainable Water Purification

Nanocelluloses (NC) are nature-based sustainable biomaterials, which not only possess cellulosic properties but also have the important hallmarks of nanomaterials, such as large surface area, versatile reactive sites or functionalities, and scaffolding stability to host inorganic nanoparticles. This class of nanomaterials offers new opportunities for a broad spectrum of applications for clean water production that were once thought impractical. This Review covers substantial discussions based on evaluative judgments of the recent literature and technical advancements in the fields of coagulation/flocculation, adsorption, photocatalysis, and membrane filtration for water decontamination through proper understanding of fundamental knowledge of NC, such as purity, crystallinity, surface chemistry and charge, suspension rheology, morphology, mechanical properties, and film stability. To supplement these, discussions on low-cost and scalable NC extraction, new characterizations including solution small-angle X-ray scattering evaluation, and structure-property relationships of NC are also reviewed. Identifying knowledge gaps and drawing perspectives could generate guidance to overcome uncertainties associated with the adaptation of NC-enabled water purification technologies. Furthermore, the topics of simultaneous removal of multipollutants disposal and proper handling of post/spent NC are discussed. We believe NC-enabled remediation nanomaterials can be integrated into a broad range of water treatments, greatly improving the cost-effectiveness and sustainability of water purification.

Injectable thiol-ene hydrogel of galactoglucomannan and cellulose nanocrystals in delivery of therapeutic inorganic ions with embedded bioactive glass nanoparticles

We propose an injectable nanocomposite hydrogel that is photo-curable via light-induced thiol-ene addition between methacrylate modified O-acetyl-galactoglucomannan (GGMMA) and thiolated cellulose nanocrystal (CNC-SH). Compared to free-radical chain polymerization, the orthogonal step-growth of thiol-ene addition allows a less heterogeneous hydrogel network and more rapid crosslinking kinetics. CNC-SH reinforced the GGMMA hydrogel as both a nanofiller and a crosslinker to GGMMA resulting in an interpenetrating network via thiol-ene addition. Importantly, the mechanical stiffness of the GGMMA/CNC-SH hydrogel is mainly determined by the stoichiometric ratio between the thiol groups on CNC-SH and the methacrylate groups in GGMMA. Meanwhile, the bioactive glass nanoparticle (BaGNP)-laden hydrogels of GGMMA/CNC-SH showed a sustained release of therapeutic ions in simulated body fluid in vitro, which extended the bioactive function of hydrogel matrix. Furthermore, the suitability of the GGMMA/CNC-SH formulation as biomaterial resin to fabricate digitally designed hydrogel constructs via digital light processing (DLP) lithography printing was evaluated.

Advances in nanocellulose-based materials as adsorbents of heavy metals and dyes

In recent years, nanocellulose-based materials have been increasingly applied as a lot of biosorbents for the treatment of water pollutants due to their large specific surface area, easy modification, environmental friendliness, and reproducibility. In this review, surface modification of nanocellulose-based adsorbents with various effective adsorption groups is described, as well as polymer grafting and hybrid composite fabrication. The adsorption mechanisms involved in the adsorption process of pollutants by adsorbents are further analysed and summarized. The regeneration methods of nanocellulose adsorbents with different adsorption mechanisms are also demonstrated. In addition, this paper also briefly describes the forms of nanocellulose-based adsorbents with large-scale application including membranes, gels, flocculants and magnetic composites.

Simultaneous adsorption of mercury species from aquatic environments using magnetic nanoparticles coated with nanomeric silver functionalized with l-Cysteine

We introduce a novel, efficient and fast method for the total and simultaneous removal of monomethylmercury, dimethylmercury, ethylmercury and Hg (II) from aquatic environments using magnetic core nanoparticles, coated with metallic nanomeric silver and functionalized with l-Cysteine. As far as the authors know, simultaneous removal has not been achieved previously. The experimental design was based on exploring a wide range of experimental conditions, including pH of the medium (2-12), contact time (up to 20 min), adsorbent dose (50-800 μL) and temperature (293-323 K), in order to achieve the highest adsorption efficiency. The results show that, for a pH equal to 6.2 at room temperature, 400 μL of nanoparticles is sufficient to achieve 100% adsorption efficiency for all the studied Hg species after a contact time of 30 s. The adsorbent was characterized by means of Scanning Electron Microscopy, Energy Dispersive X-ray Analysis, Fourier-Transform Infrared Spectroscopy and a BET test. Moreover, the procedure allows the total recovery and recycling of the nanoparticles using 50 μL of 0.01 M KI. As regards reuse, the adsorbent exhibits no loss of adsorption capacity during the first three adsorption cycles. Thermodynamics reveals that adsorption is of a physicochemical nature, the equilibrium isotherms being described by a Langmuir model for all the Hg species. The ability of the method to simultaneously adsorb all species of mercury present in water, achieving full adsorption in just a few seconds, along with the simple experimental conditions and its cost-effectiveness, strongly support the approach as an alternative to current procedures.

Facile preparation of L-cysteine-modified cellulose microspheres as a low-cost adsorbent for selective and efficient adsorption of Au(III) from the aqueous solution

A facile method to synthesize adsorbent based on cellulose modified by amino acid was developed. The novel L-cysteine-functionalized adsorbent for Au(III) recovery was synthesized via radiation grafting technique. Glycidyl methacrylate (GMA) was grafted on the surface of microcrystalline cellulose microsphere (MCC); next, ring-opening reaction was performed to immobilize L-cysteine. The adsorption abilities of the adsorbent (CysR) were tested. Batch experiments suggested that the maximum adsorption capacity of Au(III) is 714.28 mg/g calculated by Langmuir model. The adsorption kinetic data was followed by pseudo-second-order model. CysR showed excellent selectivity for Au(III) even the concentration of competing ions was all ten times than that of Au(III). The column experiments revealed that Au(III) could be efficiently adsorbed by CysR competition with equal amounts of Ni(II) and Zn(II). Moreover, XPS analysis demonstrated that the adsorbed Au(III) was reduced to Au(I) and Au(0). The adsorption performance certified that CysR was a promising adsorbent for Au(III) recovery.

Dual nanofibrillar-based bio-sorbent films composed of nanocellulose and lysozyme nanofibrils for mercury removal from spring waters

The present study explores the preparation of dual nanofibrillar-based bio-sorbent films composed of cellulose nanofibrils (CNFs) and lysozyme nanofibrils (LNFs) for application in the removal of Hg(II) from aqueous solutions. The free-standing films were fabricated via simple vacuum filtration of water suspensions of CNFs and LNFs and disclose good mechanical and thermal properties. The Hg(II) removal efficiency was evaluated by atomic fluorescence spectroscopy in ultra-pure and natural spring waters contaminated with environmental realistic levels of mercury (50 μg L^-1). The removal efficiency is pH-dependent reaching a maximum of 99 % after 24 h at a pH value close to the isoelectric point of the protein. Under the experimental conditions, the sorption kinetics are well described by the pseudo-second-order and Elovich models, suggesting a chemisorption mechanism. These results demonstrate the ability of the dual nanofibrillar-based films to remove Hg(II) from water samples reaching a residual concentration lower than the guideline value for water intended for human consumption (1 μg L^-1). Therefore, the CNFs/LNFs bio-sorbents might be a solution to treat low-concentrated mercury-contaminated waters.

Adsorption Processing for the Removal of Toxic Hg(II) from Liquid Effluents: Advances in the 2019 Year

Mercury is a toxic metal, thus, it is an element which has more and more restrictions in its uses, but despite the above, the removal of this metal, from whatever the form in which it is encountered (zero valent metal, inorganic, or organic compounds), and from different sources, is of a widespread interest. In the case of Hg(II), or Hg2+, the investigations about the treatment of Hg(II)-bearing liquid effluents (real or in most cases synthetic solutions) appear not to end, and from the various separation technologies, adsorption is the most popular among researchers. In this topic, and in the 2019 year, more than 100 publications had been devoted to this field: Hg(II)-removal-adsorption. This work examined all of them.

A POSS-Phosphazene Based Porous Material for Adsorption of Metal Ions from Water

The development of adsorptive materials continues to be an important area of research for removal of heavy metal ions from waste water. The adsorption capacity can be modulated by both physical and chemical modification of the adsorbent. Herein, we combine the unique properties of polyhedral oligomeric silsesquioxane (POSS) and organocyclophosphazene as the building units to synthesize a hybrid porous material, abbreviated as PN-POSS. The synthetic method follows a Heck reaction between hexa(4-bromophenoxy)cyclotriphosphazene and octavinylsilsesquioxane (OVS). The Brunauer-Emmett-Teller (BET) analysis shows that the material possesses micro- and mesopores of 1.5 and 3.8 nm size and a surface area on the order of 500 m²  g^-1 . These attributes in combination with the donor ability of the phosphazene units qualify the material for high adsorption of Pb²⁺ , Hg²⁺ and Cu²⁺ ions with maximal adsorption capacities on the order of 1326, 1927 and 2654 mg g^-1 , respectively. The adsorbent exhibits a good regeneration performance and can be effectively used for water treatment.

Novel Functionalized Cellulose Microspheres for Efficient Separation of Lithium Ion and Its Isotopes: Synthesis and Adsorption Performance

The adsorption of lithium ions(Li+) and the separation of lithium isotopes have attracted interests due to their important role in energy storage and nuclear energy, respectively. However, it is still challenging to separate the Li+ and its isotopes with high efficiency and selectivity. A novel cellulose-based microsphere containing crown ethers groups (named as MCM-g-AB15C5) was successfully synthesized by pre-irradiation-induced emulsion grafting of glycidyl methacrylate (GMA) and followed by the chemical reaction between the epoxy group of grafted polymer and 4'-aminobenzo-15-crown-5 (AB15C5). By using MCM-g-AB15C5 as adsorbent, the effects of solvent, metal ions, and adsorption temperature on the adsorption uptake of Li+ and separation factor of 6Li/7Li were investigated in detail. Solvent with low polarity, high adsorption temperature in acetonitrile could improve the uptake of Li+ and separation factor of lithium isotopes. The MCM-g-AB15C5 exhibited the strongest adsorption affinity to Li+ with a separation factor of 1.022 ± 0.002 for 6Li/7Li in acetonitrile. The adsorption isotherms in acetonitrile is fitted well with the Langmuir model with an ultrahigh adsorption capacity up to 12.9 mg·g-1, indicating the unexpected complexation ratio of 1:2 between MCM-g-AB15C5 and Li+. The thermodynamics study confirmed the adsorption process is the endothermic, spontaneous, and chemisorption adsorption. As-prepared novel cellulose-based adsorbents are promising materials for the efficient and selective separation of Li+ and its isotopes.