Antibiotic removal by agricultural waste biochars with different forms of iron oxide

Covalent organic framework aerogel for high-performance solid-phase extraction of tetracycline antibiotics: Experiment and simulated calculation on adsorption behavior

Three-dimensional sponge-architecture covalent organic frameworks (COFs)-aerogel was successfully designed and synthesized via a freeze-drying template approach, and utilized as an efficient sorbent in solid-phase extraction (SPE). A method for selective enrichment of pharmaceutical contaminants including tetracycline, chlortetracycline, methacycline and oxytetracycline in the environment and food samples was proposed by combining with high performance liquid chromatography (HPLC). To understand the adsorption mechanism, selectivity test and molecular dynamics (MD) simulated calculation were both carried out. The experimental and in-silico results demonstrated that the COFs-aerogel possessed high selectivity for contaminants with H bond acceptors/donors and good efficiency with maximum adsorption capacity up to 294.1 mg/g. The SPE-based HPLC method worked well in the range of 8-1000 ng/mL, with the need of little dose of adsorbent and sample volume while no need of spectrometer, outgoing the reported adsorbents. Under the optimized conditions, the intra-day and inter-day relative standard deviations (RSD) of repeatability were within 2.78-6.29 % and 2.44-8.42 % (n = 5). The results meet the current detection requirement for practical applications, and could be extended for further design of promising adsorbents.

Properties and Possibilities of Using Biochar Composites Made on the Basis of Biomass and Waste Residues Ferryferrohydrosol Sorbent

Biochar enriched with metals has an increased potential for sorption of organic and inorganic pollutants. The aim of the research was to identify the possibility of using biochar composites produced on the basis of waste plant biomass and waste FFH (ferryferrohydrosol) containing iron atoms, after CO2 capture. The composites were produced in a one-stage or two-stage pyrolysis process. Their selected properties were determined as follows: pH, ash content, C, H, N, O, specific surface area, microstructure and the presence of surface functional groups. The produced biochar and composites had different properties resulting from the production method and the additive used. The results of experiments on the removal of methylene blue (MB) from solutions allowed us to rank the adsorbents used according to the maximum dye removal value achieved as follows: BC1 (94.99%), B (84.61%), BC2 (84.09%), BC3 (83.23%) and BC4 (83.23%). In terms of maximum amoxicillin removal efficiency, the ranking is as follows: BC1 (55.49%), BC3 (23.51%), BC2 (18.13%), B (13.50%) and BC4 (5.98%). The maximum efficiency of diclofenac removal was demonstrated by adsorbents BC1 (98.71), BC3 (87.08%), BC4 (74.20%), B (36.70%) and BC2 (30.40%). The most effective removal of metals Zn, Pb and Cd from the solution was demonstrated by BC1 and BC3 composites. The final concentration of the tested metals after sorption using these composites was less than 1% of the initial concentration. The highest increase in biomass on prepared substrates was recorded for the BC5 composite. It was higher by 90% and 54% (for doses of 30 g and 15 g, respectively) in relation to the biomass growth in the soil without additives. The BC1 composite can be used in pollutant sorption processes. However, BC5 has great potential as a soil additive in crop yield and plant growth.

Effects of surfactants on the adsorption of norfloxacin onto ferrihydrite: comparison between anionic and cationic surfactants

There is little information on how widespread surfactants affect the adsorption of norfloxacin (NOR) onto iron oxide minerals. In order to elucidate the effects of various surfactants on the adsorption characteristics of NOR onto typical iron oxides, we have explored the different influences of sodium dodecylbenzene sulfonate (SDBS), an anionic surfactant, and didodecyldimethylammonium bromide (DDAB), a cationic surfactant, on the interactions between NOR and ferrihydrite under different solution chemistry conditions. Interestingly, SDBS facilitated NOR adsorption, whereas DDAB inhibited NOR adsorption. The adsorption-enhancement effect of SDBS was ascribed to the enhanced electrostatic attraction, the interactions between the adsorbed SDBS on ferrihydrite surfaces and NOR molecules, and the bridging effect of SDBS between NOR and iron oxide. In comparison, the adsorption-inhibition effect of DDAB owning to the adsorption site competitive adsorption between NOR and DDAB for the effective sites as well as the steric hindrance between NOR-DDAB complexes and the adsorbed DDAB on ferrihydrite surfaces. Additionally, the magnitude of the effects of surfactants on NOR adsorption declined with increasing pH values from 5.0 to 9.0, which was related to the amounts of surfactant binding to ferrihydrite surfaces. Moreover, when the background electrolyte was Ca2+, the enhanced effect of SDBS on NOR adsorption was caused by the formation of NOR-Ca2+-SDBS complexes. The inhibitory effect of DDAB was due to the DDAB coating on ferrihydrite, which undermined the cation-bridging effect. Together, the findings from this work emphasize the essential roles of widely existing surfactants in controlling the environmental fate of quinolone antibiotics.

Insights into levofloxacin adsorption with machine learning models using nano-composite hydrochars

Hydrothermal carbonization was applied to taro peel wastes to produce hydrochars using a facile and environmentally friendly process. Four different entities were prepared: hydrochar (TPh), phosphoric-activated hydrochar (P-TPh), and silver@hydrochars (Ag@TPh, Ag@P-TPh). The elemental compositions of the single and composite hydrochars were confirmed by EDX. Among the produced hydrochars, the morphology of the Ag@hydrochar composites demonstrated more wrinkled structure, and Ag nanoparticles decorated the surface. The optimal experimental conditions for levofloxacin adsorption were determined to be a contact time of 45 min, hydrochar dose of 0.15 g L-1, and pH of 7. The best adsorption performances were assigned to Ag@hydrochars. Two machine learning models were applied to predict the levofloxacin adsorption efficiency of the Ag@hydrochars. A central composite design (CCD) and a 3-10-1 artificial neural network (ANN) model were developed to estimate the removal performance of levofloxacin using Levenberg-Marquardt backpropagation algorithm based on correlation and error analysis of the adopted training functions. Furthermore, the ANN sensitivity analysis revealed the order of the relative importance variable as initial concentration> hydrochar dose> pH. The predicted values of the CCD and ANN models fitted the experimental results with R2> 0.989. Therefore, the applied models were effective in predicting levofloxacin removal under different operating conditions. This work provides an open option for the sustainable management of food industry wastes and the possibility of waste valorization to effective hydrochar composites to be applied in water treatment processes.

A combination of QTL mapping and genome-wide association study revealed the key gene for husk number in maize

KEY MESSAGE

Two key genes Zm00001d021232 and Zm00001d048138 were identified by QTL mapping and GWAS. Additionally, they were verified to be significantly associated with maize husk number (HN) using gene-based association study. As a by-product of maize production, maize husk is an important industrial raw material. Husk layer number (HN) is an important trait that affects the yield of maize husk. However, the genetic mechanism underlying HN remains unclear. Herein, a total of 13 quantitative trait loci (QTL) controlling HN were identified in an IBM Syn 10 DH population across different locations. Among these, three QTL were individually repeatedly detected in at least two environments. Meanwhile, 26 unique single nucleotide polymorphisms (SNPs) were detected to be significantly (p < 2.15 × 10-6) associated with HN in an association pool. Of these SNPs, three were simultaneously detected across multiple environments or environments and best linear unbiased prediction (BLUP). We focused on these environment-stable and population-common genetic loci for excavating the candidate genes responsible for maize HN. Finally, 173 initial candidate genes were identified, of which 22 were involved in both multicellular organism development and single-multicellular organism process and thus confirmed as the candidate genes for HN. Gene-based association analyses revealed that the variants in four genes were significantly (p < 0.01/N) correlated with HN, of which Zm00001d021232 and Zm00001d048138 were highly expressed in husks and early developing ears among different maize tissues. Our study contributes to the understanding of genetic and molecular mechanisms of maize husk yield and industrial development in the future.

Metal organic framework-derived recyclable magnetic coral Co@Co3O4/C for adsorptive removal of antibiotics from wastewater

The menace posed by antibiotic contamination to humanity has increased due to the absence of efficient antibiotic removal processes in the conventional waste water treatment methods from the hospitals, households, animal husbandry, and pharma industry. Importantly, only a few commercially available adsorbents are magnetic, porous, and have the ability to selectively bind and separate various classes of antibiotics from the slurries. Herein, we report the synthesis of a coral-like Co@Co3O4/C nanohybrid for the remediation of three different classes of antibiotics - quinolone, tetracycline, and sulphonamide. The coral like Co@Co3O4/C materials are synthesized via a facile room temperature wet chemical method followed by annealing in a controlled atmosphere. The materials demonstrate an attractive porous structure with an excellent surface-to-mass ratio of 554.8 m2 g-1 alongside superior magnetic responses. A time-varying adsorption study of aqueous nalidixic acid solution on Co@Co3O4/C nanohybrids indicates that these coral-like Co@Co3O4/C nanohybrids could achieve a high removal efficiency of 99.98% at pH 6 in 120 min. The adsorption kinetics data of Co@Co3O4/C nanohybrids follow a pseudo-second-order reaction kinetics suggesting a chemisorption effect. The adsorbent has also shown its merit in reusability for four adsorption-desorption cycles without showing significant change in the removal efficiency. More in-depth studies validate that the excellent adsorption capability of Co@Co3O4/C adsorbent attributing to the electrostatic and π-π interaction between adsorbent and various antibiotics. Concisely, the adsorbent manifests the potential for the removal of a wide range of antibiotics from the water alongside showing their utility in the hassle-free magnetic separation.

Adsorptive removal of antibiotic pollutants from wastewater using biomass/biochar-based adsorbents

This study explores adsorptive removal measures to shed light on current water treatment innovations for kinetic/isotherm models and their applications to antibiotic pollutants using a broad range of biomass-based adsorbents. The structure, classifications, sources, distribution, and different techniques for the remediation of antibiotics are discussed. Unlike previous studies, a wide range of adsorbents are covered and adsorption of comprehensive classes of antibiotics onto biomass/biochar-based adsorbents are categorized as β-lactam, fluoroquinolone, sulfonamide, tetracycline, macrolides, chloramphenicol, antiseptic additives, glycosamides, reductase inhibitors, and multiple antibiotic systems. This allows for an assessment of their performance and an understanding of current research breakthroughs in applying various adsorbent materials for antibiotic removal. Distinct from other studies in the field, the theoretical basis of different isotherm and kinetics models and the corresponding experimental insights into their applications to antibiotics are discussed extensively, thereby identifying the associated strengths, limitations, and efficacy of kinetics and isotherms for describing the performances of the adsorbents. In addition, we explore the regeneration of adsorbents and the potential applications of the adsorbents in engineering. Lastly, scholars will be able to grasp the present resources employed and the future necessities for antibiotic wastewater remediation.

Biochar-mediated removal of pharmaceutical compounds from aqueous matrices via adsorption

Pharmaceutical is one of the noteworthy classes of emerging contaminants. These biologically active compounds pose a range of deleterious impacts on human health and the environment. This is attributed to their refractory behavior, poor biodegradability, and pseudopersistent nature. Their large-scale production by pharmaceutical industries and subsequent widespread utilization in hospitals, community health centers, and veterinary facilities, among others, have significantly increased the occurrence of pharmaceutical residues in various environmental compartments. Several technologies are currently being evaluated to eliminate pharmaceutical compounds (PCs) from aqueous environments. Among them, adsorption appears as the most viable treatment option because of its operational simplicity and low cost. Intensive research and development efforts are, therefore, currently underway to develop inexpensive adsorbents for the effective abatement of PCs. Although numerous adsorbents have been investigated for the removal of PCs in recent years, biochar-based adsorbents have garnered tremendous scientific attention to eliminate PCs from aqueous matrices because of their decent specific surface area, tunable surface chemistry, scalable production, and environmentally benign nature. This review, therefore, attempts to provide an overview of the latest progress in the application of biochar for the removal of PCs from wastewater. Additionally, the fundamental knowledge gaps in the domain knowledge are identified and novel strategic research guidelines are laid out to make further advances in this promising approach towards sustainable development.

Biochar application for remediation of organic toxic pollutants in contaminated soils; An update

Bioremediation of organic contaminants has become a major environmental concern in the last few years, due to its bio-resistance and potential to accumulate in the environment. The use of diverse technologies, involving chemical and physical principles, and passive uptake utilizing sorption using ecofriendly substrates have drawn a lot of interest. Biochar has got attention mainly due to its simplicity of manufacturing, treatment, and disposal, as it is a less expensive and more efficient material, and has a lot of potential for the remediation of organic contaminants. This review highlighted the adverse impact of persistent organic pollutants on the environment and soil biota. The utilization of biochar to remediate soil and contaminated compounds i.e., pesticides, polycyclic aromatic hydrocarbons, antibiotics, and organic dyes has also been discussed. The soil application of biochar has a significant impact on the biodegradation, leaching, and sorption/desorption of organic contaminants. The sorption/desorption of organic contaminants is influenced by chemical composition and structure, porosity, surface area, pH, and elemental ratios, and surface functional groups of biochar. All the above biochar characteristics depend on the type of feedstock and pyrolysis conditions. However, the concentration and nature of organic pollutants significantly alters the sorption capability of biochar. Therefore, the physicochemical properties of biochar and soils/wastewater, and the nature of organic contaminants, should be evaluated before biochar application to soil and wastewater. Future initiatives, however, are needed to develop biochars with better adsorption capacity, and long-term sustainability for use in the xenobiotic/organic contaminant remediation strategy.

Biochar composite derived from cellulase hydrolysis apple branch for quinolone antibiotics enhanced removal: Precursor pyrolysis performance, functional group introduction and adsorption mechanisms

In this study, magnetic biochar (MAB) and humic acid (HA)-coated magnetic biochar produced from apple branches without and after cellulase hydrolysis (HMAB and CHMAB, respectively) were prepared and tested as adsorbents of enrofloxacin (ENR) and moxifloxacin (MFX) in aqueous solution. Compared with MAB and HMAB, novel adsorbent CHMAB possessed a superior mesoporous structure, greater graphitization degree and abundant functional groups. When antibiotic solutions ranged from 2 to 20 mg L^-1, the theoretical maximum adsorption capacities of CHMAB for ENR and MFX were 48.3 and 61.5 mg g^-1 at 35 °C with adsorbent dosage of 0.4 g L^-1, respectively, while those of MAB and HMAB were 39.6 and 54.4 mg g^-1, and 44.7 and 59.0 mg g^-1, respectively. The pseudo-second-order kinetic model and Langmuir model presented a better fitting to the spontaneous and endothermic adsorption process. The maximum adsorption capacity of ENR and MFX onto CHMAB was achieved at initial pH values of 5 and 8, respectively. Additionally, the adsorption capacity of ENR and MFX decreased with increasing concentrations of K⁺ and Ca²⁺ (0.02-0.1 mol L^-1). Synergism between the pore-filling effect, π-π electron-donor-acceptor interactions, regular and negative charge-assisted H-bonding, surface complexation, electrostatic interactions and hydrophobic interactions may dominate the adsorption process. This study demonstrated that a novel magnetic biochar composite prepared through pyrolysis of agricultural waste lignocellulose hydrolyzed by cellulase in combination with HA coating was a promising adsorbent for eliminating quinolone antibiotics from aqueous media.

Production and characterization of cost-effective magnetic pine bark biochar and its application to remove tetracycline from water

Low-cost adsorbent, pine bark biochar (PBB) from the forest residue, was produced and applied to remove tetracycline (TC) from aqueous solution via adsorption pathway. The PBB, hence obtained, was modified using aqueous ferric and ferrous ion solutions to obtain magnetic pine bark biochar (M-PBB). Batch adsorption experiments were conducted to examine the adsorption of TC by PBB and M-PBB in the variation of pH, contact time, dosage, and temperature. The adsorbents were characterized by SEM/EDX, TGA, and pH_pzc. The adsorption mechanism was evaluated by fitting Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich (D-R) isotherms model. Also, the experimental data were analyzed by kinetics models (pseudo-first-order, pseudo-second-order, intra-particle diffusion, and Elovich) and thermodynamics. The maximum adsorption capacity (q_m) of M-PBB was 15.3 mg/g from the experiment at pH 6. A high correlation coefficient (R² ≈ 0.9) of Freundlich isotherm postulated multi-layer adsorption of TC on M-PBB at pH 6. The kinetic studies showed that the pseudo-first-order was more suitable for representing the adsorption of TC molecules on the surface. The thermodynamic analysis was showed that the adsorption process is favorable, spontaneous, and endothermic at studied temperatures. M-PBB demonstrated a potential for removal of TC from water as a low-cost and convenient adsorbent.

Chitosan-Modified Biochar and Unmodified Biochar for Methyl Orange: Adsorption Characteristics and Mechanism Exploration

In this study, shrimp shell-derived chitosan (CS) and rice husk-derived biochar (RHB) were produced; CS and RHB were then used to synthesize chitosan-modified biochar (CSBC) hydrogel beads. N₂ adsorption (77K), SEM-EDX and FT-IR techniques were used to evaluate the physicochemical properties of the adsorbents. A batch experiment was conducted to test the methyl orange (MO) adsorption performance of RHB and CSBC. The results showed that the MO adsorption process was strongly pH-dependent. The kinetics were well described by the pseudo-second-order and intra-particle diffusion models, assuming the chemisorption and intraparticle diffusion mechanisms govern the adsorption process. Homogeneous adsorption for MO on the surface of RHB and CSBC was also assumed since the isotherm data showed the best-fit to the Langmuir model. Under the experimental conditions of initial pH 3, dosage 0.2 g, contact time 240 min and temperature 298 K, the maximum adsorption capacity of CSBC and RHB for MO dye adsorption was 38.75 mg.g^-1 and 31.63 mg.g^-1, respectively. This result demonstrated that biochar had better performance after modification with chitosan, which provided more functional groups (i.e., -NH₂ and -OH groups) for enhanced electrostatic interactions and complexation between MO and CSBC. Overall, CSBC is an effective adsorbent for the removal of MO from aqueous solution.

Enhanced Ciprofloxacin Removal from Aqueous Solution Using a Chemically Modified Biochar Derived from Bamboo Sawdust: Adsorption Process Optimization with Response Surface Methodology

Contamination of water by ciprofloxacin has become a significant concern due to its adverse health effects and growing evidence of antimicrobial-resistant gene evolution. To this end, a chemically modified bamboo biochar was prepared from bamboo sawdust to effectively remove ciprofloxacin (CIP) from an aqueous solution. Under similar adsorption conditions, the modified bamboo biochar (MBC) has an excellent CIP removal efficiency (96%) compared to unmodified bamboo biochar (UBC) efficiency (45%). Thus, MBC was used in batch adsorption experiments, and the process was optimized with the central composite design (CCD) framework of response surface methodology (RSM). Sorption process parameters such as initial CIP concentration, pH, adsorbent dose, and contact time were studied and found to have a significant effect on CIP removal. The optimal CIP removal (96%) was obtained at MBC dose (0.5 g L-1), CIP initial concentration (20 mg L-1), pH (7.5), and contact time (46 min). The adsorption kinetic data were well described by the pseudo-second-order model ( $R^2=0.999$ ), and both Langmuir ( $R^2=0.994$ ) and Freundlich ( $R^2=0.972$ ) models gave the best fit in CIP adsorption isotherm analysis. The maximum monolayer adsorption capacity of the MBC was 78.43 mg g-1 based on the Langmuir isotherm model. These results suggest that CIP adsorption was mainly controlled by chemisorption. Moreover, the CIP adsorption process was endothermic and spontaneous. Overall, MBC is a low-cost, efficient, and recyclable adsorbent for eliminating emerging contaminants such as ciprofloxacin from an aqueous solution.

One-Step Synthesis of a Mn-Doped Fe2O3/GO Core-Shell Nanocomposite and Its Application for the Adsorption of Levofloxacin in Aqueous Solution

This study describes for the first time the synthesis, characterization, and application of a MnFe₂O₃/GO core-shell nanocomposite as an adsorbent for the removal of levofloxacin (Lev) from real water samples. The formation of the proposed nanocomposite was confirmed using various characterization techniques. The structural techniques revealed a 20 nm average particle size of the MnFe₂O₃/GO core-shell nanocomposite, with a surface area of 70.7 m² g^-1, as shown by the BET results. The most influential parameters (adsorbent dosage, stirring rate, and Lev pH) that affected the adsorption process were optimized using the response surface methodology (RSM) based on a central composite design. The optimum conditions were 0.007 g, 2, and 7 for adsorbent dosage, stirring rate, and Lev pH, respectively. The adsorption behavior of Lev on the MnFe₂O₃/GO core-shell nanocomposite was examined using isotherm models, kinetics, and thermodynamics. The kinetic models demonstrated that the adsorption process was controlled by both intraparticle and outer diffusion. Furthermore, the results obtained revealed that the adsorption of Lev on MnFe₂O₃/GO was dominated by electrostatic interactions. Moreover, Dubinin-Radushkevich and Temkin isotherms confirmed that the sorption mechanism was dominated by electrostatic interactions, while Langmuir and Sips models confirmed a monolayer adsorption process. The maximum adsorption capacity of Lev onto the MnFe₂O₃/GO adsorbent was found to be 129.9 mg g^-1. Furthermore, the thermodynamic data revealed that the adsorption system was spontaneous and exothermic. The synthesized MnFe₂O₃/GO core-shell nanocomposite showed significant recyclability and regenerability properties up to five adsorption-desorption cycles. As a proof of concept, the performance of the prepared adsorbent was evaluated for laboratory-scale purification of spiked real water samples. The prepared adsorbent significantly reduced the concentration of Lev in the real water samples and the removal efficiency ranged from 86 to 97%.

Engineered biochar: A multifunctional material for energy and environment

Biochar is a stable carbon-rich product loaded with upgraded properties obtained by thermal cracking of biomasses in an oxygen-free atmosphere. The pristine biochar is further modified to produce engineered biochar via various physical, mechanical, and chemical methods. The hasty advancement in engineered biochar synthesis via different technologies and their application in the field of energy and environment is a topical issue that required an up-to-date review. Therefore, this review deals with comprehensive and recent mechanistic approaches of engineered biochar synthesis and its further application in the field of energy and the environment. Synthesis and activation of engineered biochar via various methods has been deliberated in brief. Furthermore, this review systematically covered the impacts of engineered biochar amendment in the composting process, anaerobic digestion (AD), soil microbial community encouragement, and their enzymatic activities. Finally, this review provided a glimpse of the knowledge gaps and challenges associated with application of engineered biochar in various fields, which needs urgent attention in future research.

A comprehensive review on recent advances toward sequestration of levofloxacin antibiotic from wastewater

Among various classes of antibiotics, fluoroquinolones, especially Levofloxacin, are being administered on a large scale for numerous purposes. Being highly stable to be completely metabolized, residual quantities of Levofloxacin get accumulated into the food chain proving a great global threat for aquatic as well as terrestrial ecosystems. Various removal techniques including both conventional and advanced methods have been reported for this purpose. This review is a novel attempt to make a critical analysis of the recent advances made exclusively toward the sequestration of Levofloxacin from wastewater through an extensive literature survey (2015-2021). Adsorption and advanced oxidation processes especially photocatalytic degradation are the most tested techniques in which assorted nanomaterials play a significant role. Several photocatalysts exhibited up to 100% degradation of LEV which makes photocatalytic degradation the best method among other tested methods. However, the degraded products need to be further monitored in terms of their toxicity. Biological degradation may prove to be the most environment-friendly with the least toxicity, unfortunately, not much research is reported in the field. With these key findings and knowledge gaps, authors suggest the scope of hybrid techniques, which have been experimented on other antibiotics. These can potentially minimize the disadvantages of the individual techniques concurrently improving the efficiency of LEV removal. Besides, techniques like column adsorption, membrane treatment, and ozonation, being least reported, reserve good perspectives for future research. With these implications, the review will certainly serve as a breakthrough for researchers working in this field to aid their future findings.

Designing chitosan based magnetic beads with conocarpus waste-derived biochar for efficient sulfathiazole removal from contaminated water

The development of a simple method to synthesize highly efficient and stable magnetic microsphere beads for sulfathiazole (STZ) removal from contaminated aqueous media was demonstrated in this study. Conocarpus (Conocarpus erectus L.) tree waste (CW) derived biochar (BC) was modified to fabricate chitosan-BC (CBC) and magnetic CBC (CBC-Fe) microsphere beads. Proximate, chemical, and structural properties of the produced adsorbents were investigated. Kinetics, equilibrium, and pH adsorption batch trials were conducted to evaluate the effectiveness of the synthesized adsorbents for STZ removal. All adsorbents exhibited the highest STZ adsorption at pH 5.0. STZ adsorption kinetics data was best emulated using pseudo-second order and Elovich models. The equilibrium adsorption data was best emulated using Langmuir, Freundlich, Redlich-Peterson, and Temkin models. CBC-Fe demonstrated the highest Elovich, pseudo-second order, and power function rate constants, as well as the highest apparent diffusion rate constant. Additionally, Langmuir isotherm predicted maximum adsorption capacity was the highest for CBC-Fe (98.67 mg g-1), followed by CBC (56.54 mg g-1) and BC (48.63 mg g-1). CBC-Fe and CBC removed 74.5%-108.8% and 16.2%-25.6% more STZ, respectively, than that of pristine BC. π-π electron-donor-acceptor interactions and Lewis acid-base reactions were the main mechanisms for STZ removal; however, intraparticle diffusion and H-bonding further contributed in the adsorption process. The higher efficiency of CBC-Fe for STZ adsorption could be due to its magnetic properties as well as stronger and conducting microsphere beads, which degraded the STZ molecules through generation of HO• radicals.

Activated Olive Stones as a Low-Cost and Environmentally Friendly Adsorbent for Removing Cephalosporin C from Aqueous Solutions

In this paper, we describe the removal of cephalosporin C (CPC) from aqueous solutions by adsorption onto activated olive stones (AOS) in a stirred tank. For comparative purposes, several experiments of adsorption onto commercial granular activated carbon were carried out. A quantum study of the different species of cephalosporin C that, depending on the pH, exist in aqueous solution pointed to a favorable mass transfer process during adsorption. Activated olive stones were characterized by SEM, EDX and IR techniques and their pHzc was determined. A 10-3 M HCl cephalosporin C solution has been selected for the adsorption experiments because at the pH of that solution both electrostatic and hydrogen bond interactions are expected to be established between the adsorbate and the adsorbent. The adsorption process is best described by the Freundlich isotherm model and the pseudo-second-order kinetic model, while the adsorption mechanism is mainly controlled by film diffusion. Under the conditions studied, the adsorption process is of a physical nature, endothermic and spontaneous. Comparison of the adsorption results obtained in this paper with those of other authors shows that the efficiency of AOS is 20% of that of activated carbon but 65% higher than that of the XAD-2 adsorbent. Considering its low price, abundance, easy accessibility and eco-compatibility, the use of activated olive stones as adsorbents for the removal of emerging pollutants from aqueous solutions represents an interesting possibility from both the economic and the environmental points of view.

Electrospun Functional Nanofiber Membrane for Antibiotic Removal in Water: Review

As a new kind of water pollutant, antibiotics have encouraged researchers to develop new treatment technologies. Electrospun fiber membrane shows excellent benefits in antibiotic removal in water due to its advantages of large specific surface area, high porosity, good connectivity, easy surface modification and new functions. This review introduces the four aspects of electrospinning technology, namely, initial development history, working principle, influencing factors and process types. The preparation technologies of electrospun functional fiber membranes are then summarized. Finally, recent studies about antibiotic removal by electrospun functional fiber membrane are reviewed from three aspects, namely, adsorption, photocatalysis and biodegradation. Future research demand is also recommended.

Cysteine chemical modification for surface regulation of biochar and its application for polymetallic adsorption from aqueous solutions

Biochar (BC) has been widely used to remove heavy metals from wastewater. However, due to the hydrophobicity of BC and the lack of its surface functional groups, the effect of metal ions adsorption onto BC is limited. In order to improve the adsorption efficiency, L-cysteine was used to modify biochar derived from pomelo peel (PP) to regulate surface structure. The characteristics of BC and cysteine/biochar composite (cys/BC) were analyzed by various characterization methods. Results showed that the hydrophilicity of biochar was enhanced, and the number of surface functional groups was increased, resulting to strong adsorption ability of Ag(I) (618.9 mg/g), Pb(II) (274.5 mg/g), and As(V) (34.7 mg/g) for cys/BC, which increased approximately by 15%, 35%, and 29% compared with that of BC, respectively. The adsorption process of Pb(II) onto cys/BC was fitted better by the Freundlich isotherm model and for Ag(I) and As(V) by the Langmuir isotherm model. Moreover, the adsorption kinetics followed pseudo-second-order equation and the adsorption process was controlled by the intraparticle diffusion for Ag(I), Pb(II), and As(V) adsorption onto cys/BC. In addition, the adsorption capacities of cys/BC for Ag(I), Pb(II), and As(V) decreased slightly after five adsorption/desorption cycles. Finally, the multiple adsorption mechanisms including functional groups, pore adsorption, surface complexation, and cations-π were analyzed. The paper demonstrated that the cys/BC composite could be reused as effective adsorbents for removing contaminants in the environment.

Effect of phosphate on the adsorption of antibiotics onto iron oxide minerals: Comparison between tetracycline and ciprofloxacin

With the broadly application of antibiotics to treat infectious diseases in humans and animals, antibiotic contaminants such as tetracycline (TC) and ciprofloxacin (CIP) have been detected in soil environments, where iron oxide minerals and phosphate are ubiquitous. To date, the influence of phosphate on the adsorption behaviors of TC/CIP onto iron oxides is still poorly understood. In this study, the effects of phosphate on the adsorptions of TC and CIP onto iron oxide minerals were investigated. Adsorption isotherms showed that the adsorption affinities of TC and CIP onto the three iron oxide minerals were in the order of goethite > hematite > magnetite with or without phosphate, the trend was dominated by different surface area and amount of surface hydroxyl groups of iron oxide minerals. Meanwhile, TC contains more functional groups than CIP for bonding, which resulted in greater adsorption affinity of three iron oxides to TC than that to CIP. Interestingly, phosphate weakened TC adsorption, while enhanced CIP adsorption, on the three iron oxides. This observation was ascribed to that phosphate anion enhanced the surface negative charge of iron oxides, which reinforced the electrostatic repulsion between iron oxides and negatively charged TC, also reinforced the electrostatic attraction between iron oxides and positively charged CIP. Furthermore, the inhibitory effect of phosphate on TC adsorption was dramatically enhanced at high pH, while the promoting effect of phosphate on CIP adsorption was slightly changed with various pH. Our results highlight the importance of phosphate in exploring the environmental fate of antibiotics in natural environment.

Purification of Aqueous Media by Biochars: Feedstock Type Effect on Silver Nanoparticles Removal

Due to the harmful effects of nanoparticles in the environment, their effective removal from aqueous media is of great importance. This paper described the research on the silver nanoparticles (Ag-NPs) sorption on biochars obtained from different feedstock types. The sorbents were produced through pyrolysis (double-barrel method) of the vineyard (BV), paulownia tree (BP), and tobacco (BT). BV exhibited the highest specific surface area, porosity, value of variable surface charge, and content of surface acidic functional groups among the used biochars. The pseudo-second order model best described the obtained adsorption kinetics, whereas the Freundlich model accounted for the registered adsorption data. The Ag-NPs removal was highly efficient in the case of BV, especially in the nanoparticle concentration range 50-500 mg/L. Thus, this biochar can be considered as an ecofriendly, effective, low-cost organic adsorbent, potentially used in the aqueous media purification.

Feasibility study on a new pomelo peel derived biochar for tetracycline antibiotics removal in swine wastewater

Removal of tetracycline antibiotics (TCs) by biochar adsorption is emerging as a cost-effective and environmentally friendly strategy. This study developed a novel pomelo peel derived biochar, which was prepared at 400 °C (BC-400) and 600 °C (BC-600) under nitrogen conditions. To enhance the adsorption capacity, BC-400 was further activated by KOH at 600 °C with a KOH: BC-400 ratio of 4:1. The activated biochar (BC-KOH) displayed a much larger surface area (2457.37 m²/g) and total pore volume (1.14 cm³/g) than BC-400 and BC-600. High adsorption capacity of BC-KOH was achieved for removing tetracycline (476.19 mg/g), oxytetracycline (407.5 mg/g) and chlortetracycline (555.56 mg/g) simultaneously at 313.15 K, which was comparable with other biochars derived from agricultural wastes reported previously. The adsorption data could be fitted by the pseudo-second-order kinetic model and Langmuir isotherm model successfully. The initial solution pH indicated the potential influence of TCs adsorption capacity on BC-KOH. These results suggest that pore filling, electrostatic interaction and π-π interactions between the adsorbent and adsorbate may constitute the main adsorption mechanism. BC-KOH can be used as a potential adsorbent for removing TCs from swine wastewater effectively, cheaply and in an environmentally friendly way.

The effective adsorption of tetracycline onto zirconia nanoparticles synthesized by novel microbial green technology

Pseudomonas aeruginosa bacteria have been used in this study for zirconia nanoparticles synthesis through green technology for adsorption driven bioremediation of tetracycline from wastewater. The characterization of synthesized nano zirconia has been performed by employing dynamic light scattering, field emission-transmission electron microscopy, energy dispersive X-ray, X-ray diffraction, fourier transform infrared spectroscopy, and point of zero charge analysis. The zirconia nanoparticles have shown average particle size ~15 nm, monoclinic and tetragonal crystal structure with 6.41 nm of crystallite size, the presence of elemental zirconium and oxygen, and the occurrence of functional groups like O-Zr-OH, Zr-O-Zr and Zr-O bonds. The zirconia nanoparticles mediated adsorption of tetracycline has been found to be effective at solution pH 6.0 and in a very less contact time 15 min. Strong electrostatic interaction between zwitterionic form of tetracycline and protonated surface of zirconia nanoparticles is the governing adsorption mechanism in this study. The kinetic study has been performed on the basis of the tetracycline adsorption process revealing that the adsorption phenomenon follows pseudo-second order kinetic, further suggesting chemisorption of tetracycline over zirconia nanoparticles. The Langmuir isotherm model has been found to be the best fitted model among the all isotherm models indicating the involvement of monolayer uptake of tetracycline on the surface of zirconia nanoparticles. Moreover, the maximum tetracycline adsorption capacity of zirconia nanoparticles calculated by the Langmuir isotherm model is close to 526.32 mg/g. This finding is quite reasonable to accept that zirconia nanoparticle may be used as an alternative adsorbent to mitigate the tetracycline contamination in wastewater.

Green synthesis of graphitic nanobiochar for the removal of emerging contaminants in aqueous media

This study reports the preparation of nanobiochar (NBC) via top-down approach of bioenergy waste-derived dendro biochar through mechanised grinding in order to assess its capacity to remove emerging contaminants, such as antibiotics, agrochemicals, and potentially toxic elements from aqueous media. Preconditioned biochar was disc milled in ethanol media, and the resulting colloidal biochar was dispersed in water to obtain the NBC fraction by centrifugation. Adsorption edge and isotherm experiments were carried out at pH 3 to 8 and NBC dosages of 0.5 g/L for oxytetracycline (OTC), glyphosate (GL), hexavalent chromium (CrVI), and cadmium (CdII). NBC was characterised by scanning electron microscopy, X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller surface area, and Fourier transform infrared spectroscopy, which demonstrated the flakey and graphitic nature of the NBC particles with a surface area of 28 m²/g and the presence of different functional groups, such as OH, CO, NH, and CH₃. The best pH for OTC and Cd(II) was 9, whereas the best pH levels for GL and Cr(VI) were 7 and 4, respectively. Isotherms depicted a positive cooperative adsorption mechanism by providing the best fit to the Hills equation, with high removal capacities for four contaminants. Dendro NBC showed the best performance, demonstrated by the high partition coefficient for the removal of OTC, GL, Cr(VI), and Cd(II) over various types of adsorbents. The overall results indicated that graphitic NBC produced by mechanical grinding of dendro biochar is a promising material for the removal of OTC, GL, Cr(VI), and Cd(II) from aqueous media.