Spectroscopic and solution properties characterization of quaternary ammonium ion containing polycations complexed with fluorescent rhodamine sulfonic acid dyes

Based on the growing range of applications for polycations in research and commercial materials, a continuing need exists to advance the fundamental knowledge and understanding of this class of materials. Spectroscopic and solution properties characterizations of noncovalently labeled, fluorescent Alexa Fluor® dye complexes of two commercial polycations, poly(2-(trimethylamino) ethyl methacrylate) monocation and poly[bis[2-chloroethyl] ether-alt-1,3-bis[3-(dimethylamino) propyl] urea] dication are reported to help address this need. A variety of fluorescence spectroscopic methods are used with a special emphasis on fluorescence correlation spectroscopy (FCS) which is applied to characterize the Stokes radius (RS) and equilibrium dissociation constants (Kd) of dye-polycation complexes at nanomolar dye concentrations. Resulting RS values indicate dye binding to individual polycation chains. Measured Kd values in the sub-micromolar range are consistent with strong dye binding. Increasing solution ionic strength with sodium chloride addition inhibits dye binding and decreases the RS of dye-polycation complexes due to size collapse of polycation chains. The complexes differ in their solution stability to ionic strength changes suggesting that both electrostatic and hydrophobic binding interactions influence dye binding. This study establishes the viability of noncovalent dye-polycation complexation in concert with FCS characterization as a general approach for investigating the properties of quaternary ammonium ion containing polycations in aqueous solution.

Polyethylene imine-modified photonic crystal microfluidic chip for highly sensitive detection of microbial spores

To address the lengthy cycles, complex operations, high costs, and insufficient sensitivity of biomarker detection in traditional biological control agents, photonic crystal treated with PEI was developed for highly sensitive detection of Sclerotinia sclerotiorum microbial spores. By incorporating gelatin molecules, photonic crystal is endowed with excellent photothermal stability and high stability in aqueous solutions. The photonic crystal surface is conferred a positive charge by PEI, which can be used to enhance the adsorption of spores. Efficient enrichment of Sclerotinia sclerotiorum and Purpureocillium lilacinum spores is achieved, with coefficients of determination 0.963 and 0.971, respectively. The detection range is from 102 to 106 spores/ml, and the photonic crystal exhibited good reusability. The prepared photonic crystal enables rapid, non-destructive, and accurate quantitative detection of microbial spores.

Self-assembled ROS-triggered Bletilla striata polysaccharide-releasing hydrogel dressing for inflammation-regulation and enhanced tissue-healing

The antimicrobial and pro-healing properties remain critical clinical objectives for skin wound management. However, the escalating problem of antibiotic overuse and the corresponding rise in bacterial resistance necessitates an urgent shift towards an antibiotic-free approach to antibacterial treatment. The quest for antimicrobial efficacy while accelerating wound healing without antibiotic treatment have emerged as innovative strategies in skin wound treatment. Here, a dual-function hydrogel with antimicrobial and enhanced tissue-healing properties was developed by utilizing cyclodextrin, ferrocene, polyethyleneimine (PEI), and Bletilla striata polysaccharide (BSP), through multiple non-covalent interactions, which can intelligently release BSP by recognizing the wound inflammatory microenvironment through the cyclodextrin-ferrocene unit. Moreover, the porosity (65 % - 85 %), Young's modulus (400 KPa - 140 KPa), and DPPH scavenge rate (18 % - 40 %) of the hydrogel are modulated by varying the BSP content. The hydrogel exhibits outstanding antibacterial properties (98.3 % reduction of Escherichia coli observed after exposure to HTFC@BSP-20 for 24 h) and favorable biocompatibility. Furthermore, in a rat full-thickness skin wound model, the dual-function hydrogel significantly accelerates wound healing, increased CD31 expression promotes vascular regeneration, reduced TNF-α express and inhibited the inflammation. This multifunctional ROS responsive hydrogel provides a new perspective for antibiotics-free treatment of skin injuries.

Cationic Amphiphilic Comb-Shaped Polymer Emulsifier for Fabricating Avermectin Nanoemulsion with Exceptional Leaf Behaviors and Multidimensional Controlled Release

The development of intelligent multifunctional nanopesticides featuring enhanced foliage affinity and hierarchical target release is increasingly pivotal in modern agriculture. In this study, a novel cationic amphiphilic comb-shaped polymer, termed PEI-TA, was prepared via a one-step Michael addition between low-molecular-weight biodegradable polyethylenimine (PEI) and tetradecyl acrylate (TA), followed by neutralization with acetic acid. Using the emulsifier PEI-TA, a positively charged avermectin (AVM) nanoemulsion was prepared via a phase inversion emulsification process. Under optimal formulation, the obtained AVM nanoemulsion (defined as AVM@PEI-TA) demonstrated exceptional properties, including small size (as low as 67.6 nm), high encapsulation efficiency (up to 87.96%), and high stability toward shearing, storage, dilution, and UV irradiation. The emulsifier endowed AVM@PEI-TA with a pronounced thixotropy, so that the droplets exhibited no splash and bounce when they were sprayed on the cabbage leaf. Owing to the electrostatic attraction between the emulsifier and the leaf, AVM@PEI-TA showed improved leaf adhesion, better deposition, and higher washing resistance in contrast to both its negatively charged counterpart and AVM emulsifiable concentrate (AVM-EC). Compared to the large-sized particles, the small-sized particles of the AVM nanoemulsion more effectively traveled long distances through the vascular system of veins after entering the leaf apoplast. Moreover, the nanoparticles lost stability when exposed to multidimensional stimuli, including pH, temperature, esterase, and ursolic acid individually or simultaneously, thereby promoting the release of AVM. The release mechanisms were discussed for understanding the important role of the emulsifier in nanopesticides.

The Gibbs and Butler Equations and the Surface Activity of Dilute Aqueous Solutions of Strong and Weak Linear Polyelectrolyte-Surfactant Mixtures: The Roles of Surface Composition and Polydispersity

In a previous paper, we applied a combination of direct measurements of both surface tension and surface excess in conjunction with the Gibbs equation to explain features of the adsorption and surface tension of mixtures of surfactants and strong linear polyelectrolytes at the air-water interface. This paper extends that model by including (i) the restrictions of the Butler equation for the behavior of the surface tension of mixed systems and (ii) the surface behavior of surfactant and linear weak polyelectrolyte mixtures, for which the inclusion of measurements of the surface excess and composition is shown to be particularly important. In addition, a closer examination of earlier data at higher concentrations provides evidence that the surface layering that is often observed in polyelectrolyte-surfactant systems is also an average equilibrium phenomenon and is driven by particular aggregation patterns that occur in some systems and not in others. Although the successful application of the Gibbs and Butler equations indicates that strong polyelectrolyte-surfactant systems can be described in terms of an average equilibrium over wide ranges of concentration, we have identified two concentration ranges where polydispersity in either polyelectrolyte molecular weight or composition results in significant time dependence of the surface behavior.

Delivery of miRNAs Using Nanoparticles for the Treatment of Osteosarcoma

Osteosarcoma is the predominant primary malignant bone tumor that poses a significant global health challenge. MicroRNAs (miRNAs) that regulate gene expression are associated with osteosarcoma pathogenesis. Thus, miRNAs are potential therapeutic targets for osteosarcoma. Nanoparticles, widely used for targeted drug delivery, facilitate miRNA-based osteosarcoma treatment. Numerous studies have focused on miRNA delivery using nanoparticles to inhibit the progress of osteosarcoma. Polymer-based, lipid-based, inorganic-based nanoparticles and extracellular vesicles were used to deliver miRNAs for the treatment of osteosarcoma. They can be modified to enhance drug loading and delivery capabilities. Also, miRNA delivery was combined with traditional therapies, for example chemotherapy, to treat osteosarcoma. Consequently, miRNA delivery offers promising therapeutic avenues for osteosarcoma, providing renewed hope for patients. This review emphasizes the studies utilizing nanoparticles for miRNA delivery in osteosarcoma treatment, then introduced and summarized the nanoparticles in detail. And it also discusses the prospects for clinical applications.

AMP-Mimetic Antimicrobial Polymer-Involved Synergic Therapy with Various Coagents for Improved Efficiency

The misuse of antibiotics contributes to the emergence of multidrug-resistant (MDR) bacteria. Infections caused by MDR bacteria are rapidly evolving into a significant threat to global healthcare due to the lack of effective and safe treatments. Antimicrobial peptides (AMPs) with broad-spectrum antibacterial activity kill bacteria generally through a membrane disruption mechanism; hence, they tend not to induce resistance readily. However, AMPs exhibit disadvantages, such as high cost and susceptibility to proteolytic degradation, which limit their clinical application. AMP-mimetic antimicrobial polymers, with low cost, stability to proteolysis, broad-spectrum antimicrobial activity, negligible antimicrobial resistance, and rapid bactericidal effect, have received extensive attention as a new type of antibacterial drugs. Lately, AMP-mimetic polymer-involved synergic therapy provides a superior alternative to combat MDR bacteria by distinct mechanisms. In this Review, we summarize the AMP-mimetic antimicrobial polymers involved in synergic therapy, particularly focusing on the different combinations between the polymers with commercially available antimicrobials, organic small molecule photosensitizers, inorganic nanomaterials, and nitric oxide.

Direct synthesis of partially ethoxylated branched polyethylenimine from ethanolamine

We report here a method to make a branched and partially ethoxylated polyethyleneimine derivative directly from ethanolamine. The polymerization reaction is catalysed by a pincer complex of Earth-abundant metal, manganese, and produces water as the only byproduct. Industrial processes to produce polyethyleneimines involve the transformation of ethanolamine to a highly toxic chemical, aziridine, by an energy-intensive/waste-generating process followed by the ring-opening polymerization of aziridine. The reported method bypasses the need to produce a highly toxic intermediate and presents advantages over the current state-of-the-art. We propose that the polymerization process follows a hydrogen borrowing pathway that involves (a) dehydrogenation of ethanolamine to form 2-aminoacetaldehyde, (b) dehydrative coupling of 2-aminoacetaldehyde with ethanolamine to form an imine derivative, and (c) subsequent hydrogenation of imine derivative to form alkylated amines.

Specific and efficient knockdown of intracellular miRNA using partially neutralized phosphate-methylated DNA oligonucleic acid-loaded mesoporous silica nanoparticles

Antisense oligonucleotides (ASOs) are molecules used to regulate RNA expression by targeting specific RNA sequences. One specific type of ASO, known as neutralized DNA (nDNA), contains site-specific methyl phosphotriester (MPTE) linkages on the phosphate backbone, changing the negatively charged DNA phosphodiester into a neutralized MPTE with designed locations. While nDNA has previously been employed as a sensitive nucleotide sequencing probe for the PCR, the potential of nDNA in intracellular RNA regulation and gene therapy remains underexplored. Our study aims to evaluate the regulatory capacity of nDNA as an ASO probe in cellular gene expression. We demonstrated that by tuning MPTE locations, partially and intermediately methylated nDNA loaded onto mesoporous silica nanoparticles (MSNs) can effectively knock down the intracellular miRNA, subsequently resulting in downstream mRNA regulation in colorectal cancer cell HCT116. Additionally, the nDNA ASO-loaded MSNs exhibit superior efficacy in reducing miR-21 levels over 72 hours compared to the efficacy of canonical DNA ASO-loaded MSNs. The reduction in the miR-21 level subsequently resulted in the enhanced mRNA levels of tumour-suppressing genes PTEN and PDCD4. Our findings underscore the potential of nDNA in gene therapies, especially in cancer treatment via a fine-tuned methylation location.

Novel thymohydroquinone gallate derivative loaded ligand modified quantum dots as pH-sensitive multi-modal theragnostic agent for cancer treatment

BACKGROUND

Nanomedicine, as the combination of radiopharmaceutical and nanocarrier (QDs), is developed for treating cancer. Gallic acid is antimutagenic, anti-inflammatory, and anti-carcinogenic. Typical retention time of gallic acid is approximately 4 to 8 h. To increase the retention time gallic acid is converted to prodrug by adding lipophilic moieties, encapsulating in lipophilic nanoparticles, or liposome formation. Similarly, thymoquinone is powerful antioxidant, anti-apoptotic, and anti-inflammatory effect, with reduced DNA damage.

METHODS

In this study, a hydrophilic drug (gallic acid) is chemically linked to the hydrophobic drug (thymohydroquinone) to overcome the limitations of co-delivery of drugs. Thymohydroquinone (THQG) as the combination of gallic acid (GA) and thymoquinone (THQ) is loaded onto the PEI functionalized antimonene quantum dots (AM-QDs) and characterized by FTIR, UV-visible spectroscopy, X-ray powder diffraction, Zeta sizer, SEM and AFM, in-vitro and in-vivo assay, and hemolysis.

RESULTS

The calculated drug loading efficiency is 90 %. Drug release study suggests the drug combination is pH sensitive and it can encounters acidic pH, releasing the drug from the nanocarrier. The drug and drug-loaded nanocarrier possesses low cytotoxicity and cell viability on MCF-7 and Cal-27 cell lines. The proposed drug delivery system is radiolabeled with Iodine-131 (131I) and Technetium (99mTc) and its deposition in various organs of rats' bodies is examined by SPECT-CT and gamma camera. Hemolytic activity of 2, 4, 6, and 8 μg/mL is 1.78, 4.16, 9.77, and 15.79 %, respectively, reflecting low levels of hemolysis. The system also sustains oxidative stress in cells and environment, decreasing ROS production to shield cells and keep them healthy.

CONCLUSIONS

The results of this study suggest that the proposed drug carrier system can be used as a multi-modal theragnostic agent in cancer treatment.

Reprogrammed IDO-Induced Immunosuppressive Microenvironment Synergizes with Immunogenic Magnetothermodynamics for Improved Cancer Therapy

Indoleamine 2,3-dioxygenase (IDO), highly expressed in hepatocellular carcinoma (HCC), plays a pivotal role in creating an immune-suppressive tumor microenvironment. Inhibiting IDO activity has emerged as a promising immunotherapeutic strategy; however, the delivery of IDO inhibitors to the tumor site is constrained, limiting their therapeutic efficacy. In this study, we developed a magnetic vortex nanodelivery system for the targeted delivery of the IDO inhibitor NLG919, integrated with magnetic hyperthermia therapy to reverse the immune-suppressive microenvironment of liver cancer and inhibit tumor growth. This system comprises thermoresponsive polyethylenimine-coated ferrimagnetic vortex-domain iron oxide nanorings (PI-FVIOs) loaded with NLG919 (NLG919/PI-FVIOs). Under thermal effects, NLG919 can be precisely released from the delivery system, counteracting IDO-mediated immune suppression and synergizing with NLG919/PI-FVIOs-mediated magnetothermodynamic (MTD) therapy-induced immunogenic cell death (ICD), resulting in effective HCC suppression. In vivo studies demonstrate that this combination therapy significantly inhibits tumor growth and metastasis by enhancing the accumulation of cytotoxic T lymphocytes and suppressing regulatory T cells within the tumor. Overall, our findings reveal that NLG919/PI-FVIOs can induce a potent antitumor immune response by disrupting the IDO pathway and activating the ICD, offering a promising therapeutic avenue for HCC treatment.

Cationic nanocarriers: A potential approach for targeting negatively charged cancer cell

Cancer, a widespread and lethal disease, necessitates precise therapeutic interventions to mitigate its devastating impact. While conventional chemotherapy remains a cornerstone of cancer treatment, its lack of specificity towards cancer cells results in collateral damage to healthy tissues, leading to adverse effects. Thus, the quest for targeted strategies has emerged as a critical focus in cancer research. This review explores the development of innovative targeting methods utilizing novel drug delivery systems tailored to recognize and effectively engage cancer cells. Cancer cells exhibit morphological and metabolic traits, including irregular morphology, unchecked proliferation, metabolic shifts, genetic instability, and a higher negative charge, which serve as effective targeting cues. Central to these strategies is the exploitation of the unique negative charge characteristic of cancer cells, attributed to alterations in phospholipid composition and the Warburg effect. Leveraging this distinct feature, researchers have devised cationic carrier systems capable of enhancing the specificity of therapeutic agents towards cancer cells. The review delineates the underlying causes of the negative charge in cancer cells and elucidates various targeting approaches employing cationic compounds for drug delivery systems. Furthermore, it delves into the methods employed for the preparation of these systems. Beyond cancer treatment, the review also underscores the multifaceted applications of cationic carrier systems, encompassing protein and peptide delivery, imaging, photodynamic therapy, gene delivery, and antimicrobial applications. This comprehensive exploration underscores the potential of cationic carrier systems as versatile tools in the fight against cancer and beyond.

Turning Polysaccharides into Injectable and Rapid Self-Healing Antibacterial Hydrogels for Antibacterial Treatment and Bacterial-Infected Wound Healing

Great efforts have been devoted to the development of novel and multifunctional wound dressing materials to meet the different needs of wound healing. Herein, we covalently grafted quaternary ammonium groups (QAGs) containing 12-carbon straight-chain alkanes to the dextran polymer skeleton. We then oxidized the resulting product into oxidized quaternized dextran (OQD). The obtained OQD polymer is rich in antibacterial QAGs and aldehyde groups. It can react with glycol chitosan (GC) via the Schiff-base reaction to form a multifunctional GC@OQD hydrogel with good self-healing behavior, hemostasis, injectability, inherent superior antibacterial activity, biocompatibility, and excellent promotion of healing of methicillin-resistant Staphylococcus aureus (MRSA)-infected wounds. The biosafe and nontoxic GC@OQD hydrogel with a three-dimensional porous network structure possesses an excellent swelling rate and water retention capacity. It can be used for hemostasis and treating irregular wounds. The designed GC@OQD hydrogel with inherent antibacterial activity possesses good antibacterial efficacy on both S. aureus (Gram-positive bacteria) and Escherichia coli (Gram-negative bacteria), as well as MRSA bacteria, with antibacterial activity greater than 99%. It can be used for the treatment of wounds infected by MRSA and significantly promotes the healing of wounds. Thus, the multifunctional antibacterial GC@OQD hydrogel has the potential to be applied in clinical practice as a wound dressing.

Recent Advances in Engineering Carriers for siRNA Delivery

RNA interference (RNAi) technology has been a promising treatment strategy for combating intractable diseases. However, the applications of RNAi in clinical are hampered by extracellular and intracellular barriers. To overcome these barriers, various siRNA delivery systems have been developed in the past two decades. The first approved RNAi therapeutic, Patisiran (ONPATTRO) using lipids as the carrier, for the treatment of amyloidosis is one of the most important milestones. This has greatly encouraged researchers to work on creating new functional siRNA carriers. In this review, the recent advances in siRNA carriers consisting of lipids, polymers, and polymer-modified inorganic particles for cancer therapy are summarized. Representative examples are presented to show the structural design of the carriers in order to overcome the delivery hurdles associated with RNAi therapies. Finally, the existing challenges and future perspective for developing RNAi as a clinical modality will be discussed and proposed. It is believed that the addressed contributions in this review will promote the development of siRNA delivery systems for future clinical applications.

Development of benzaldehyde-pyrazoline hybrids for functionalization of polymers with fluorescent pendant moieties

Compounds with a pyrazoline scaffold are useful as sensors for fluorescence detection of different types of analytes. Recovery of a pyrazoline-based sensor with a view to use it recurrently would be more facile when the sensing molecule is attached to a solid support. A reaction sequence has been designed to synthesize two benzaldehyde-pyrazoline hybrids as examples of a hitherto unknown type of compounds to be employed for the potential derivatization of polymers containing primary amino groups through azomethine formation. All intermediates, including the fairly unstable N1 -unsubstituted pyrazolines, along with the target compounds have been structurally characterized, with an emphasis on their particular NMR features. Examination of the photophysical properties of these benzaldehyde-pyrazoline hybrids showed that, despite the shortening of the extended N1-N2-C3 conjugated system common to 1,3,5-triarylpyrazolines through the replacement of the aryl at N1 by an aryloxyacetyl moiety, the novel compounds exhibit emission maxima at approximately 350 nm. Moreover, the introduction of a moderately electron-withdrawing substituent such as chlorine in the phenyl at C3 of pyrazoline leads to an amplification of fluorescence intensity.

Polymersomes for Therapeutic Protein and Peptide Delivery: Towards Better Loading Properties

Therapeutics based on proteins and peptides have profoundly transformed the landscape of treatment for diseases, from diabetes mellitus to cancers, yet the short half-life and low bioavailability of therapeutic proteins and peptides hinder their wide applications. To break through this bottleneck, biomolecules-loaded polymersomes with strong adjustability and versatility have attracted more and more attentions recently. Loading proteins or peptides into polymersomes is the first but extremely important step towards developing high-quality formulation products. However, increasing protein and peptide loading content is quite challenging due to the inherent nature of self-assembled vesicle formation mechanism and physiochemical characteristics of biomacromolecules. This review highlights the potential of polymersomes as the next-generation therapeutic proteins and peptides carrier and emphatically introduces novel approaches and recent progress to achieve satisfactory encapsulation capability of polymersomes for proteins and peptides. On the one hand, with the help of intermolecular interactions, such as electrostatic, lipid-protein, and hydrophobic interactions, the drug loading could be significantly improved. On the other hand, loading improvement could be attained through innovation of preparation methods, ranging from modified traditional film hydration techniques to the novel phase-guided assembly method.

Biodistribution of Therapeutic Small Interfering RNAs Delivered with Lipid-Substituted Polyethylenimine-Based Delivery Systems

Small interfering RNAs (siRNAs) have emerged as a powerful tool to manipulate gene expression in vitro. However, their potential therapeutic application encounters significant challenges, such as degradation in vivo, limited cellular uptake, and restricted biodistribution, among others. This study evaluates the siRNA delivery efficiency of three different lipid-substituted polyethylenimine (PEI)-based carriers, named Leu-Fect A-C, to different organs in vivo, including xenograft tumors, when injected into the bloodstream of mice. The siRNA analysis was undertaken by stem-loop RT-PCR, followed by qPCR or digital droplet PCR. Formulating siRNAs with a Leu-Fect series of carriers generated nanoparticles that effectively delivered the siRNAs into K652 and MV4-11 cells, both models of leukemia. The Leu-Fect carriers were able to successfully deliver BCR-Abl and FLT3 siRNAs into leukemia xenograft tumors in mice. All three carriers demonstrated significantly enhanced siRNA delivery into organs other than the liver, including the xenograft tumors. Preferential biodistribution of siRNAs was observed in the lungs and spleen. Among the delivery systems, Leu-Fect A exhibited the highest biodistribution into organs. In conclusion, lipid-substituted PEI-based delivery systems offer improvements in addressing pharmacokinetic challenges associated with siRNA-based therapies, thus opening avenues for their potential translation into clinical practice.

PEI-based functional materials: Fabrication techniques, properties, and biomedical applications

Cationic polymers have recently attracted considerable interest as research breakthroughs for various industrial and biomedical applications. They are particularly interesting due to their highly positive charges, acceptable physicochemical properties, and ability to undergo further modifications, making them attractive candidates for biomedical applications. Polyethyleneimines (PEIs), as the most extensively utilized polymers, are one of the valuable and prominent classes of polycations. Owing to their flexible polymeric chains, broad molecular weight (MW) distribution, and repetitive structural units, their customization for functional composites is more feasible. The specific beneficial attributes of PEIs could be introduced by purposeful functionalization or modification, long service life, biocompatibility, and distinct geometry. Therefore, PEIs have significant potential in biotechnology, medicine, and bioscience. In this review, we present the advances in PEI-based nanomaterials, their transfection efficiency, and their toxicity over the past few years. Furthermore, the potential and suitability of PEIs for various applications are highlighted and discussed in detail. This review aims to inspire readers to investigate innovative approaches for the design and development of next-generation PEI-based nanomaterials possessing cutting-edge functionalities and appealing characteristics.

Polyethylenimine Triggers Dll4 Degradation to Regulate Angiogenesis In Vitro

The Dll4-Notch signaling pathway plays a crucial role in the regulation of angiogenesis and is a promising therapeutic target for diseases associated with abnormal angiogenesis, such as cancer and ophthalmic diseases. Here, we find that polyethylenimine (PEI), a cationic polymer widely used as nucleic acid transfection reagents, can target the Notch ligand Dll4. By immunostaining and immunoblotting, we demonstrate that PEI significantly induces the clearance of cell-surface Dll4 and facilitates its degradation through the lysosomal pathway. As a result, the activation of Notch signaling in endothelial cells is effectively inhibited by PEI, as evidenced by the observed decrease in the generation of the activated form of Notch and expression of Notch target genes Hes1 and Hey1. Furthermore, through blocking Dll4-mediated Notch signaling, PEI treatment enhances angiogenesis in vitro. Together, our study reveals a novel biological effect of PEI and establishes a foundation for the development of a Dll4-targeted biomaterial for the treatment of angiogenesis-related disease.

Enhanced Antibacterial Activity against Escherichia coli Based on Cationic Carbon Dots Assembling with 5-Aminolevulinic Acid

Carbon dots (CDs) with positive surface charges are considered one of the encouraging nanomedications for antibacterial applications. However, due to the distinctive membrane structure of Gram-negative bacteria, cationic CDs with relatively high concentrations are usually required for effective treatment, which might bring out serious safety issues at high doses. Therefore, it is of substantial significance to improve the killing efficiency of cationic CDs on Gram-negative bacteria at appropriately low concentrations. In this work, optimized cationic CDs (bPEI25 000-CDs) were prepared via a hydrothermal method with citric acid and branched PEI25000, which offered a positive surface potential, elimination abilities against Escherichia coli, and relatively high biosafety. The optimized bPEI25 000-CDs can further assemble with the clinical photodynamic therapy (PDT) drug 5-aminolevulinic acid (5-ALA) through electrostatic interaction. Moreover, compared with bPEI25 000-CDs and 5-ALA, the bacterial survival rate was significantly reduced by the ALA-bPEI25 000-CD-induced PDT effect. Even when the dose of bPEI25 000-CD carrier was halved, the bacterial survival could be reduced by 44.4% after light exposure compared to those incubated in the dark. The investigation of the bacterial morphology, membrane potential, and intracellular ROS production suggested that the enhanced antibacterial activity may be due to the membrane dysfunction and cell damage resulting from the high interaction between positively charged ALA-bPEI25 000-CDs and the bacterial cell membrane. Meanwhile, the cationic ALA-bPEI25 000-CDs may facilitate the cellular uptake of 5-ALA, resulting in a more efficient PDT effect. In summary, the antibacterial strategy proposed in this study will provide a novel approach for expanding the application of CD-based nanomedications.

Copper ions reinforced flexible carboxymethylcellulose/polyethyleneimine composite films with enhanced mechanical properties, UV-shielding performance, thermal stability, solvent resistance, and antibacterial activity

A composite film (CMC/PEI) consisting of anionic carboxymethylcellulose (CMC) and cationic polyethyleneimine (PEI) can be easily produced through the solution casting method using self-assembly based on electrostatic interaction and hydrogen bonding. Subsequently, the resulting CMC/PEI polyelectrolyte composite film with a network structure was crosslinked with divalent Cu2+ ions through ionic and coordination bonds, resulting in a strengthened Cu(II)@CMC/PEI film. The composite film was characterized based on its structural, surface, thermal, UV protection, antibacterial, and degradation aspects. The results demonstrated this film has impressive mechanical properties, remarkable solvent resistance, good antibacterial properties, and excellent UV-shielding performance by completely blocking ultraviolet light with wavelengths below 360 nm. These properties can be attributed to the presence of Cu2+ ions and PEI in the film. This work is valuable for the development of novel UV-shielding materials and should contribute to the design of carboxymethylcellulose composite films with desirable properties and exceptional performance.

ICAM-1 targeted and ROS-responsive nanoparticles for the treatment of acute lung injury

Acute lung injury (ALI) is an inflammatory disease caused by multiple factors such as infection, trauma, and chemicals. Without effective intervention during the early stages, it usually quickly progresses to acute respiratory distress syndrome (ARDS). Since ordinary pharmaceutical preparations cannot precisely target the lungs, their clinical application is limited. In response, we constructed a γ3 peptide-decorated and ROS-responsive nanoparticle system encapsulating therapeutic dexamethasone (Dex/PSB-γ3 NPs). In vitro, Dex/PSB-γ3 NPs had rapid H2O2 responsiveness, low cytotoxicity, and strong intracellular ROS removal capacity. In a mouse model of ALI, Dex/PSB-γ3 NPs accumulated at the injured lung rapidly, alleviating pulmonary edema and cytokine levels significantly. The modification of NPs by γ3 peptide achieved highly specific positioning of NPs in the inflammatory area. The ROS-responsive release mechanism ensured the rapid release of therapeutic dexamethasone at the inflammatory site. This combined approach improves treatment accuracy, and drug bioavailability, and effectively inhibits inflammation progression. Our study could effectively reduce the risk of ALI progressing to ARDS and hold potential for the early treatment of ALI.

Harnessing Nanovaccines for Effective Immunization─A Special Concern on COVID-19: Facts, Fidelity, and Future Prospective

Nanotechnology has emerged as a transformative pathway in vaccine research and delivery. Nanovaccines, encompassing lipid and nonlipid formulations, exhibit considerable advantages over traditional vaccine techniques, including enhanced antigen stability, heightened immunogenicity, targeted distribution, and the potential for codelivery with adjuvants or immune modulators. This review provides a comprehensive overview of the latest advancements and applications of lipid and non-lipid-based nanovaccines in current vaccination strategies for immunization. The review commences by outlining the fundamental concepts underlying lipid and nonlipid nanovaccine design before delving into the diverse components and production processes employed in their development. Subsequently, a comparative analysis of various nanocarriers is presented, elucidating their distinct physicochemical characteristics and impact on the immune response, along with preclinical and clinical studies. The discussion also highlights how nanotechnology enables the possibility of personalized and combined vaccination techniques, facilitating the creation of tailored nanovaccines to meet the individual patient needs. The ethical aspects concerning the use of nanovaccines, as well as potential safety concerns and public perception, are also addressed. The study underscores the gaps and challenges that must be overcome before adopting nanovaccines in clinical practice. This comprehensive analysis offers vital new insights into lipid and nonlipid nanovaccine status. It emphasizes the significance of continuous research, collaboration among interdisciplinary experts, and regulatory measures to fully unlock the potential of nanotechnology in enhancing immunization and ensuring a healthier, more resilient society.

Effectiveness In Vivo and In Vitro of Polymeric Nanoparticles as a Drug Release System in the Treatment of Leishmaniasis

Leishmaniasis is a neglected disease caused by the parasite of the genus Leishmania. Current treatment regimens are obsolete and cause several side effects, promoting poor patient compliance, in addition to the vast majority already having the potential for resistance. Therefore, polymeric nanoparticles emerge as one of the viable alternatives to overcome existing limitations, through passive or active vectorization. This review aims to summarize the latest studies of polymeric nanoparticles as an alternative treatment for leishmaniasis. In the first section, the main pharmacokinetic and pharmacodynamic challenges of current drugs are reported. The second section details how nanoparticles with and without functionalization are efficient in the treatment of leishmaniasis, discussing the characteristics of the polymer in the formulation. In this way, polymeric nanoparticles can improve the physicochemical properties of leishmanicidal drugs, improving solubility and stability, as well as improve the release of these drugs, directly or indirectly reaching monocytes/macrophages. 64.28% drugs were focused on the treatment of visceral leishmaniasis, and 28.57% on cutaneous leishmaniasis. The most chosen polymers in the literature are chitosan (35.71%) and PLGA (35.71%), the others represented 14.30% drugs, with all able to manage the drug release and increase the in vitro and/or in vivo efficacy of the original molecule. However, there are several barriers for these nanoformulations to cross laboratory research and is necessary more in-depth studies about the metabolites and degradation pathways of the polymers used in the formulations and plasma proteomics studies.

Hybrid mRNA Nano Vaccine Potentiates Antigenic Peptide Presentation and Dendritic Cell Maturation for Effective Cancer Vaccine Therapy and Enhances Response to Immune Checkpoint Blockade

Cancer vaccines combined with immune checkpoint blockades (ICB) represent great potential application, yet the insufficient tumor antigen presentation and immature dendritic cells hinder improved efficacy. Here, a hybrid nano vaccine composed by hyper branched poly(beta-amino ester), modified iron oxide nano adjuvant and messenger RNA (mRNA) encoded with model antigen ovalbumin (OVA) is presented. The nano vaccine outperforms three commercialized reagents loaded with the same mRNA, including Lipofectamine MessengerMax, jetPRIME, and in vivo-jetRNA in promoting dendritic cells' transfection, maturation, and peptide presentation. In an OVA-expressing murine model, intratumoral administration of the nano vaccine significantly induced macrophages and dendritic cells' presenting peptides and expressing co-stimulatory CD86. The nano vaccine also elicited strong antigen-specific splenocyte response and promoted CD8+ T cell infiltration. In combination with ICB, the nano vaccine aroused robust tumor suppression in murine models with large tumor burdens (initial volume >300 mm3 ). The hybrid mRNA vaccine represents a versatile and readily transformable platform and augments response to ICB.

Enhanced detection of Listeria monocytogenes using tetraethylenepentamine-functionalized magnetic nanoparticles and LAMP-CRISPR/Cas12a-based biosensor

BACKGROUND

Listeria monocytogenes is a pathogenic bacterium that can lead to severe illnesses, especially among vulnerable populations. Therefore, the development of rapid and sensitive detection methods is vital to prevent and manage foodborne diseases. In this study, we used tetraethylenepentamine (TEPA)-functionalized magnetic nanoparticles (MNPs) and a loop-mediated isothermal amplification (LAMP)-based CRISPR/Cas12a-based biosensor to concentrate and detect, respectively, L. monocytogenes. LAMP enables DNA amplification at a constant temperature, providing a highly suitable approach for point-of-care testing (POCT). The ability of CRISPR/Cas12a to cleave ssDNA reporter, coupled with TEPA-functionalized MNPs effective attachment to negatively charged bacteria, forms a promising biosensor.

RESULTS

The LAMP assay was meticulously developed by selecting specific primers and designing crRNA sequences targeting a specific region within the hly gene of L. monocytogenes. We selected primer and refined the amplification conditions by systematically exploring a temperature range from 59 °C to 69 °C, ensuring the attainment of optimal performance. This process was complemented by systematic optimization of LAMP-CRISPR/Cas12a system parameters. In particular, we successfully established the optimal ssDNA reporter concentrations (0-1.2 μM) and Cas12a-mediated trans-cleavage times (0-20 min), crucial components that underpin the effectiveness of the LAMP-CRISPR/Cas12a-based biosensor. For optimizing parameters in capturing L. monocytogenes using TEPA-functionalized MNPs, capture efficiency was significantly enhanced through adjustments in TEPA-functionalized MNPs concentration, incubation times, and magnetic separation duration. Large-volume (20 mL) magnetic separation exhibited a 10-fold sensitivity improvement over conventional methods. Utilizing TEPA-functionalized MNPs, the LAMP-CRISPR/Cas12a-based biosensor achieved detection limits of 100 CFU mL-1 in pure cultures and 100 CFU g-1 in enoki mushrooms.

SIGNIFICANCE

The integration of this novel technique with the LAMP-CRISPR/Cas12a-based biosensor enhances the accuracy and sensitivity of L. monocytogenes detection in foods, and it can be a promising biosensor for POCT. The 10-fold increase in sensitivity compared to conventional methods makes this approach a groundbreaking advancement in pathogenic bacteria detection for food safety and public health.

Dual-Cross-Linked PEI/PVA Hydrogel for pH-Responsive Drug Delivery

Herein, a pH-responsive dual cross-linked hydrogel for controlled drug release is presented. The hydrogel was constructed with reversible borate ester bonds and crystalline poly(vinyl alcohol). By changing the environmental pH, its physicochemical characteristics, including rheological properties, mechanical properties, microstructural features, and the biocompatibility of the gels, were evaluated. The gels at tumor acidic conditions exhibited swelling and lower compressive strength and modulus than those in a physiological environment, which was attributed to the pH-responsive borate ester bonds and the protonation of amine groups on the PEI polyelectrolyte. Importantly, the drug-encapsulated biocompatible hydrogel showed sustained and increased release under an acidic environment, and it followed the Fickian diffusion mechanism. Therefore, it exemplifies that borate ester bond-based pH-responsive biomaterials have high promise in biomedical research, especially for drug delivery.

Multiproperty Polyethylenimine-Caged Platinum Nanoclusters Promote Apoptosis of Osteosarcoma Cells via Regulating the BAX-Bcl-2/Caspase-3/PARP Axis

Osteosarcoma, a prevalent primary bone cancer in children, exhibits a poor prognosis due to the high prevalence of drug resistance. The objective of this study was to investigate the potential of fluorescent ultrafine polyethylenimine-coated caged platinum nanoclusters (PEI-Pt NCs) as an antitumor agent in osteosarcoma. The primary focus of this study involved the utilization of osteosarcoma cells (U2-OS and MG-63) and normal control cells (hBMSC) as the primary subjects of investigation. The capacity of PEI-Pt NCs to enter osteosarcoma cells was observed through the implementation of confocal microscopy. The impact of PEI-Pt NCs on migration and proliferation was assessed through the utilization of various methodologies, including the CCK8 assay, Ki-67 immunofluorescence, clone formation assay, transwell assay, and wound healing assay. Furthermore, the influence of PEI-Pt NCs on apoptosis and its underlying mechanism was explored through the implementation of flow cytometry and Western blotting techniques. The PEI-Pt NCs demonstrated the capability to enter osteosarcoma cells, including the nucleus, while also exhibiting fluorescent labeling properties. Furthermore, the PEI-Pt NCs effectively impeded the migration and proliferation of osteosarcoma cells. Additionally, the PEI-Pt NCs facilitated apoptosis by modulating the BAX-Bcl-2/Caspase 3/PARP axis. The novel nanomaterial PEI-Pt NCs possess diverse advantageous capabilities, including the ability to impede cell proliferation and migration, as well as the capacity to modulate the BAX-Bcl-2/Caspase 3/PARP axis, thereby promoting cell apoptosis. Consequently, this nanomaterial exhibits promising potential in addressing the issue of inadequate platinum-based treatment for osteosarcoma.

Synthesis of Short Peptides with Perfluoroalkyl Side Chains and Evaluation of Their Cellular Uptake Efficiency

With an increasing demand for macromolecular biotherapeutics, the issue of their poor cell-penetrating abilities requires viable and relevant solutions. Herein, we report tripeptides bearing an amino acid with a perfluoroalkyl (RF ) group adjacent to the α-carbon. RF -containing tripeptides were synthesized and evaluated for their ability to transport a conjugated hydrophilic dye (Alexa Fluor 647) into the cells. RF -containing tripeptides with the fluorophore showed high cellular uptake efficiency and none of them were cytotoxic. Interestingly, we demonstrated that the absolute configuration of perfluoroalkylated amino acids (RF -AAs) affects not only nanoparticle formation but also the cell permeability of the tripeptides. These novel RF -containing tripeptides are potentially useful as short and noncationic cell-penetrating peptides (CPPs).

Effects of Charge Density on Spread Hyperbranched Polyelectrolyte/Surfactant Films at the Air/Water Interface

The interfacial structure and morphology of films spread from hyperbranched polyethylene imine/sodium dodecyl sulfate (PEI/SDS) aggregates at the air/water interface have been resolved for the first time with respect to polyelectrolyte charged density. A recently developed method to form efficient films from the dissociation of aggregates using a minimal quantity of materials is exploited as a step forward in enhancing understanding of the film properties with a view to their future use in technological applications. Interfacial techniques that resolve different time and length scales, namely, ellipsometry, Brewster angle microscopy, and neutron reflectometry, are used. Extended structures of both components are formed under a monolayer of the surfactant with bound polyelectrolytes upon film compression on subphases adjusted to pH 4 or 10, corresponding to high and low charge density of the polyelectrolyte, respectively. A rigid film is related to compact conformation of the PEI in the interfacial structure at pH 4, while it is observed that aggregates remain embedded in mobile films at pH 10. The ability to compact surfactants in the monolayer to the same extent as its maximum coverage in the absence of polyelectrolyte is distinct from the behavior observed for spread films involving linear polyelectrolytes, and intriguingly evidence points to the formation of extended structures over the full range of surface pressures. We conclude that the molecular architecture and charge density can be important parameters in controlling the structures and properties of spread polyelectrolyte/surfactant films, which holds relevance to a range of applications, such as those where PEI is used, including CO2 capture, electronic devices, and gene transfection.

Benzeneboronic-alginate/quaternized chitosan-catechol powder with rapid self-gelation, wet adhesion, biodegradation and antibacterial activity for non-compressible hemorrhage control

Although hemostatic powders have excellent adaptability for irregular and inaccessible wounds, their hemostasis for continuous bleeding or bleeding wounds of non-compressible organs remains a critical challenge. Herein, a series of benzeneboronic acid-modified sodium alginate/catechol-modified quaternized chitosan (SA-BA/QCS-C, SBQCC) powders is developed by borate ester crosslinking for non-compressible hemorrhage control. SBQCC powders possess remarkable tissue adhesion, rapid self-gelation, good cytocompatibility and antibacterial activity against S. aureus and E. coil. The blood coagulation assays show that SBQCC powders display excellent blood clotting ability due to the synergistic effect of SA-BA and QCS-C. The SBQCC2 powder with the SA-BA to QCS-C mass ratio of 5 to 3 has the greatest effect on the blood-clotting rate. Upon depositing SBQCC2 powder to bleeding wounds of rabbit liver, the powder can absorb a large amount of blood and form a stable hydrogel physical barrier at the bleeding wounds in situ to achieve non-pressing rapid hemostasis. The SBQCC2 powder also has good biocompatibility and can be degraded in vivo. Altogether, the SBQCC powders can be a promising candidate for rapid hemostasis, and these findings may provide a new perspective for improving the hemostatic efficiency of the hemostatic powder in biomedical fields.

Schiff base synergized with protonation of PEI to achieve smart antibacteria of nanocellulose packaging films

Microbial growth and reproduction can cause food spoilage. Developing the controlled release packaging films for food is an ideal solution. In this study, polyethyleneimine (PEI) was grafted to cellulose nanofibers (CNF) films by Schiff base, and when the CNF/PEI films were stimulated by pH, PEI released from the CNF/PEI films due to Schiff base hydrolysis, improving the antibacterial efficiency of PEI. Stimulated by acid with pH of 4, the PEI cumulative release rate of the CNF/PEI₈₀₀ and the CNF/PEI₂₀₀₀ films reached to 92.90 % and 87.28 %, respectively. At the same time, the amino groups of PEI protonated by obtaining H⁺, the charge density increased, and PEI molecular chains extended, enhancing the antibacterial activity of films. The Zeta potential value on the surface of the CNF/PEI film increased with the decrease of pH value. Schiff base synergized with protonation of PEI to achieve smart antibacteria of CNF packaging films. The antibacterial rates of the film against L. monocytogenes and E. coli were 94.7 % and 90.6 % at pH 4, but 29.5 % and 23.6 % at pH 8, respectively. The developed films also had good barrier properties of oxygen, visible light and mechanical properties, and had an attractive application prospect in food preservation to control release of antibacterial agent.

Facile preparation of PEGylated polyethylenimine polymers as vaccine carriers with reduced cytotoxicity and enhanced Interleukin-2 (IL-2) production

Developing low-cost, easy-to-prepare, biocompatible and highly efficient vaccine carriers is a promising approach to realize practical cancer immunotherapy. In this study, through facile modification of mPEG5k-4-toluenesulfonate (mPEG5k-OTs) on PEI25k under mild conditions, a series of "stealth" mPEG5k-PEI25k polymers (PP1, PP2 and PP3) were prepared, their structures and physicochemical properties were characterized and theoretically analyzed. The polymers could bind/load ovalbumin (OVA) to form mPEG5k-PEI25k/OVA complexes as negatively charged nanoparticles with small hydrodynamic particle size (80-210 nm) and narrow size distribution. Compared to PEI25k/OVA, lower cytotoxicity could be achieved on mPEG5k-PEI25k/OVA complexes in dendritic cells (DCs). In DCs-RF 33.70 T-cells co-culture system, the mPEG5k-PEI25k/OVA complexes could bring about higher IL-2 production /secretion than that of PEI25k/OVA, notably, the optimum IL-2 secretion could reach 9.3-folds of the PEI25k/OVA under serum condition (10% FBS). Moreover, the cell biological features could be optimized by selecting suitable mPEG5k-grafting ratios and/or mPEG5k-PEI25k/OVA weight ratios. Intracellular imaging results showed that the mPEG5k-PEI25k(PP3)/Rhodamine-OVA complexes mainly localized inside lysosomes. Taken together, this work provided a facile method to prepare "stealth" PEGylated-PEI25k polymers with reduced cytotoxicity, promoted OVA cross-presentation efficiency and improved serum compatibility towards cancer immunotherapy.

Highly stable and fast-dissolving ascorbic acid-loaded microneedles

OBJECTIVES

Ascorbic acid has many benefits to the skin. Numerous attempts to promote its topical delivery show great challenges since its chemical instability and poor skin impermeability. Microneedle delivery is a simple, safe, painless and effective means to deliver therapeutic or nourishing molecules into the skin. The purpose of this study was twofold: (a) to develop a new formulation of ascorbic acid-loaded microneedles to enhance ascorbic acid stability by investigating an optimal amount of polyethyleneimine as an additive to the dextran-based microneedle formulation and (b) to assess microneedle properties in terms of dissolving rate, skin penetration ability, biocompatibility and antimicrobial activity.

METHODS

The microneedles formulated with ascorbic acid and varied polyethyleneimine concentrations were fabricated and subsequently tested for ascorbic acid stability using 2,2-diphenyl-1-picrylhydrazyl assay. The dissolution rate and skin penetration depth were investigated in porcine skin and the reconstructed human full-thickness skin model respectively. The skin irritation tests were done according to the Organisation for Economic Co-operation and Development Test Guideline No. 439. An antimicrobial disc susceptibility test was performed against Escherichia coli, Staphylococcus aureus and Staphylococcus epidermidis.

RESULTS

Among varied amounts of 0%, 1.5%, 3.0% and 4.5% (w/v), the 3.0% polyethyleneimine showed the most desirable characteristics, including well-preserved shape integrity after demoulding, significantly improved stability of ascorbic acid (p < 0.001) from 33% to 96% antioxidant activity after 8 weeks of storage at 40°C, increased dissolving rate (p < 0.001) by being completely dissolved within 2 min after the skin insertion, passing skin penetration and biocompatibility tests as well as having a broad spectrum of antimicrobial property.

CONCLUSION

With a safety profile and enhanced properties, the new formulation of ascorbic acid-loaded microneedles shows outstanding potential as commercially available cosmetics and healthcare products.

Near-Infrared Light-Controlled MicroRNA-21-Loaded Upconversion Nanoparticles to Promote Bone Formation in the Midpalatal Suture

Rapid maxillary expansion (RME) is a common therapy for maxillary transverse deficiency. However, relapses after RME usually occur because of insufficient bone formation. MicroRNA-21 (miR-21) was reported as an important post-transcriptional modulator for osteogenesis. Herein, a photocontrolled miR-21 (PC-miR-21)-loaded nanosystem using upconversion nanoparticles (UCNPs) modified with poly(ether imide) (PEI), i.e., UCNPs@PEI@PC-miR-21, was constructed to promote bone formation in the midpalatal suture. UCNPs@PEI was constructed as the light transducer and delivery carrier. The UCNPs@PEI@PC-miR-21 nanocomplexes have good aqueous dispersibility and biocompatibility. The in vitro cell experiment suggested that UCNPs@PEI could protect PC-miR-21 from biodegradation and release PC-miR-21 into the cytoplasm under near-infrared light (NIR) irradiation. Furthermore, UCNPs@PEI@PC-miR-21 upregulated the expression of the osteogenic key markers, ALP, RUNX2, and COL1A1, at the levels of both genes and proteins. Besides, the results of the in vivo RME mice models further corroborated that photocontrollable UCNPs@PEI@PC-miR-21 accelerated bone formation with upregulating osteogenic markers of ALP, RUNX2, and osteoprotegerin and inducing fewer osteoclasts formation. In conclusion, UCNPs@PEI@PC-miR-21 nanoparticles with a NIR light could facilitate the remote and precise delivery of exogenous miR-21 to the midpalatal suture to promote bone formation during RME. This work represents a cutting-edge approach of gene therapy to promote osteogenesis in the midpalatal suture during RME and provides a frontier scientific basis for later clinical treatment.

Comparing the separation performance of poly(ethyleneimine) embedded butyric and octanoic acid based chromatographic stationary phases

Poly(ethyleneimine) (PEI) modified silica spheres were used to graft butyric acid and octanoic acid onto their surfaces, forming two stationary phases named Sil-PEI-BAD and Sil-PEI-CAD, respectively. Characterized methods including fourier transform infrared spectroscopy (FT-IR), elemental analysis (EA) and thermogravimetric analysis (TGA) were utilized to determine the successful synthesis of these two stationary phase materials. The chromatographic performance of these two stationary phases was analyzed with hydrophobic and hydrophilic compounds as analytes. Compared with Sil-PEI-CAD column, Sil-PEI-BAD column was more effective in separating hydrophilic compounds including nucleosides, alkaloids and vitamins. Hydrophobic substances including polycyclic aromatic hydrocarbons (PAHs) and alkylbenzenes obtained excellent separation results on Sil-PEI-CAD column than Sil-PEI-BAD column. Additionally, according to the separation of phenols, Sil-PEI-CAD column can be used in HILIC/RPLC mixed-mode. The results showed that the properties and retention mechanisms of the prepared stationary phases depended on the length of the alkyl chains bonded on the silica surface.

Response of Osteoblasts on Amine-Based Nanocoatings Correlates with the Amino Group Density

Increased life expectancy in industrialized countries is causing an increased incidence of osteoporosis and the need for bioactive bone implants. The integration of implants can be improved physically, but mainly by chemical modifications of the material surface. It was recognized that amino-group-containing coatings improved cell attachment and intracellular signaling. The aim of this study was to determine the role of the amino group density in this positive cell behavior by developing controlled amino-rich nanolayers. This work used covalent grafting of polymer-based nanocoatings with different amino group densities. Titanium coated with the positively-charged trimethoxysilylpropyl modified poly(ethyleneimine) (Ti-TMS-PEI), which mostly improved cell area after 30 min, possessed the highest amino group density with an N/C of 32%. Interestingly, changes in adhesion-related genes on Ti-TMS-PEI could be seen after 4 h. The mRNA microarray data showed a premature transition of the MG-63 cells into the beginning differentiation phase after 24 h indicating Ti-TMS-PEI as a supportive factor for osseointegration. This amino-rich nanolayer also induced higher bovine serum albumin protein adsorption and caused the cells to migrate slower on the surface after a more extended period of cell settlement as an indication of a better surface anchorage. In conclusion, the cell spreading on amine-based nanocoatings correlated well with the amino group density (N/C).

Fabrication of polyethyleneimine functionalized magnetite nanoparticles for recyclable recovery of fucoidan from aqueous solution

Fucoidan is a kind of natural water-soluble fucose-rich sulfated polysaccharide with promising applications in the food and pharmaceutical industry. However, the traditional methods for fucoidan recovery from aqueous solution are expensive, time-consuming, and environmentally unfriendly. In this work, polyethyleneimine functionalized magnetite nanoparticles (PEI-MNPs) with well-defined core-shell structures were prepared by a Layer-by-Layer (LbL) approach using sodium tripolyphosphate (STPP) as a cross-linker. The as-prepared PEI-MNPs showed improved adsorption capability towards fucoidan at pH 4-8 due to the high density of cationic groups on the surfaces and the absence of internal pores. It was found that the adsorption process of fucoidan onto PEI-MNPs can reach to equilibrium in 50 min at room temperature. The maximum qe derived from the Langmuir isotherm at room temperature was 169.1 mg per g at a pH of 7. A selective fucoidan capture over a model protein BSA can be realized by adjusting pH (6-8) and salt concentration (0.5-2.5 M). The PEI-MNPs loading with fucoidan can be isolated from the final products by a neodymium magnet and regenerated by 4 M NaCl solution as stripping reagent. Therefore, this novel kind of PEI-MNP could be a promising candidate for highly efficient and recyclable recovery of fucoidan from an aqueous solution.

Highly Selective Fluorescent Sensors: Polyethylenimine Derivatives of Triphenylamine and Coumarin for GTP and ATP Interaction via Fluorescence Lifetime Imaging Microscopy

Chemical derivatives of polyethylenimine (PEI) receptors with either triphenylamine (TPA) or 7-hydroxy-4-methyl-coumarin (Cou) form stable complexes with adenine and guanine nucleotides in water. The host-guest complex modulation is found to be based on noncovalent molecular interactions such as π-π stacking and hydrogen bonding, which are dependent on the aromatic moieties attached to the polyaminic (PEI) backbone. PEI-TPA acts as a chemosensor with a recognition driving force based on aggregation-induced emission (AIE), involving π-π interaction between the nucleic base and TPA. It detects GTP by a chelation enhancement quenching effect of fluorescence (CHEQ) with a measured logarithm stability constant, log β = 7.7. By varying the chemical characteristics of the fluorophore, as in the PEI-Cou system, the driving force for recognition changes from a π-π interaction to an electrostatic interaction. The coumarin derivative detects ATP with a log β value one order of magnitude higher than that for GTP, allowing for the selective recognition of the two nucleotides in a 100% aqueous solution. Furthermore, fluorescence lifetime imaging microscopy (FLIM) allows for a correlation between the selectivity of PEI-TPA toward nucleotides and the morphology of the structures formed upon ATP and GTP recognition. This study offers valuable insights into the design of receptors for the selective recognition of nucleotides in water.

Inorganic nanoparticle-integrated mesenchymal stem cells: A potential biological agent for multifaceted applications

Mesenchymal stem cell (MSC)-based therapies are flourishing. MSCs could be used as potential therapeutic agents for regenerative medicine due to their own repair function. Meanwhile, the natural predisposition toward inflammation or injury sites makes them promising carriers for targeted drug delivery. Inorganic nanoparticles (INPs) are greatly favored for their unique properties and potential applications in biomedical fields. Current research has integrated INPs with MSCs to enhance their regenerative or antitumor functions. This model also allows the in vivo fate tracking of MSCs in multiple imaging modalities, as many INPs are also excellent contrast agents. Thus, INP-integrated MSCs would be a multifunctional biologic agent with great potential. In this review, the current roles performed by the integration of INPs with MSCs, including (i) enhancing their repair and regeneration capacity via the improvement of migration, survival, paracrine, or differentiation properties, (ii) empowering tumor-killing ability through agent loaded or hyperthermia, and (iii) conferring traceability are summarized. An introduction of INP-integrated MSCs for simultaneous treatment and tracking is also included. The promising applications of INP-integrated MSCs in future treatments are emphasized and the challenges to their clinical translation are discussed.

Synthesis of Polyethyleneimines from the Manganese-Catalysed Coupling of Ethylene Glycol and Ethylenediamine

Polyethyleneimines find many applications in products such as detergents, adhesives, cosmetics, and for processes such as tissue culture, gene therapy, and CO2 capture. The current state-of-the-art technology for the production of the branched polyethyleneimines involves aziridine feedstock which is a highly toxic, volatile and mutagenic chemical and raises significant concern to human health and environment. We report here a novel method for the synthesis of branched polyethyleneimine derivative from ethylene glycol and ethylenediamine which are much safer, environmentally benign, commercially available and potentially renewable feedstock. The polymerisation reaction is catalysed by a complex of an earth-abundant metal, manganese and liberates H2 O as the only by-product. Our mechanistic studies using a combination of DFT computation and experiment suggest that the reaction proceeds by the formation and subsequent hydrogenation of imine intermediates.

Novel efficient capture of hexavalent chromium by polyethyleneimine/amyloid fibrils/polyvinyl alcohol aerogel beads: Functional design, applicability, and mechanisms

The harmful effects of hexavalent chromium (Cr(VI)) on the environment and human health have aroused wide public concern. In this study, bulk spherical aerogel beads (PAP) were synthesized from polyethyleneimine (PEI), protein amyloid fibrils (AFL), and polyvinyl alcohol (PVA) through green technology and its removal of Cr(VI) from wastewater was comprehensively studied. The results showed that although the bulk PAP beads (∼ 5 mm) only had an average pore size of 16.88 nm and a BET surface area of 12 m²/g, its maximum adsorption capacity for Cr(VI) reached 121.44 mg/g (at 298 K). Cr(VI) adsorption onto PAP conformed to pseudo-second-order adsorption kinetics and was endothermic. The adsorption of Cr(VI) decreased stepwise with the increase of solution alkalinity (pH = 2: 91.97%; pH = 10: 0.04%). Importantly, PAP showed high selectivity towards Cr(VI) in mixed heavy metal solutions (Cr(VI) > Pb(II) > Ni(II) > Cu(II) > Cd(II)) and good reusability (removal efficiency > 88% after 5 cycles). PAP had excellent anti-interference ability against FA and HCO₃^- with the overall removal rate exceeding 87% in the presence of 5 - 25 mg/L of these ions. Cations such as Na⁺, Mg²⁺, and other heavy metal ions at high concentrations could promote the removal efficiency of Cr(VI). The removal rates of Cr(VI) and Cr(III) by PAP in a tannery wastewater were 34.4% and 59.3%, respectively. Meanwhile, the removal rates of Cr(VI) in a electroplating wastewater and a contaminated soil leachate reached 84.4∼89.7%, showing high practicability. Mechanism studies revealed that electrostatic attraction, hydrogen bonding, reduction, and complexation were the main reactions for Cr(VI) removal by PAP. In general, the study of PAP provides a new insight into using bulk monolith materials for treating Cr(VI) contaminated wastewater.

Targeting of platinum capture under 1+1 aqua regia using robust and recyclable polymeric polyamine resin: Adsorption performance and mechanism

The targeted capture of platinum from complex and harsh acidic digests such as those platinum-containing secondary resources is essential from the perspectives of green development. Here, a polyamine chelating resin (CMPs-PEI) with excellent selectivity and acid resistance was prepared by a nucleophilic substitution reaction using chloromethylated polystyrene as the parent and polyethyleneimine as the modifier. The experimental results revealed that the adsorbent showed excellent adsorption effect on platinum under different acidities, and its maximum adsorption capacity was up to 337 mg/g at pH 2. More impressively, a rather high capacity of 162.41 mg/g was achieved in 1 + 1 aqua regia (pH -0.7), which was much higher than other adsorbent materials under the same conditions. In addition, the recovery of platinum by CMPs-PEI in practical platinum-containing iron concentrate abatement solution was 100 %. Mechanistic studies showed that the protonated amine groups on CMPs-PEI bound PtCl₆^2- and partially reduced PtCl₄^2- by electrostatic attraction. Meanwhile, the excellent regeneration performance of CMPs-PEI indicated that it showed great potential for green and economic recovery of precious metal ions.

Optimization of 3D printing and in vitro characterization of alginate/gelatin lattice and angular scaffolds for potential cardiac tissue engineering

Background: Engineering cardiac tissue that mimics the hierarchical structure of cardiac tissue remains challenging, raising the need for developing novel methods capable of creating structures with high complexity. Three-dimensional (3D)-printing techniques are among promising methods for engineering complex tissue constructs with high precision. By means of 3D printing, this study aims to develop cardiac constructs with a novel angular structure mimicking cardiac architecture from alginate (Alg) and gelatin (Gel) composite. The 3D-printing conditions were optimized and the structures were characterized in vitro, with human umbilical vein endothelial cells (HUVECs) and cardiomyocytes (H9c2 cells), for potential cardiac tissue engineering. Methods: We synthesized the composites of Alg and Gel with varying concentrations and examined their cytotoxicity with both H9c2 cells and HUVECs, as well as their printability for creating 3D structures of varying fibre orientations (angular design). The 3D-printed structures were characterized in terms of morphology by both scanning electron microscopy (SEM) and synchrotron radiation propagation-based imaging computed tomography (SR-PBI-CT), and elastic modulus, swelling percentage, and mass loss percentage as well. The cell viability studies were conducted via measuring the metabolic activity of the live cells with MTT assay and visualizing the cells with live/dead assay kit. Results: Among the examined composite groups of Alg and Gel, two combinations with ratios of 2 to 1 and 3 to 1 (termed as Alg2Gel1 and Alg3Gel1) showed the highest cell survival; they accordingly were used to fabricate two different structures: a novel angular and a conventional lattice structure. Scaffolds made of Alg3Gel1 showed higher elastic modulus, lower swelling percentage, less mass loss, and higher cell survival compared to that of Alg2Gel1. Although the viability of H9c2 cells and HUVECs on all scaffolds composed of Alg3Gel1 was above 99%, the group of the constructs with the angular design maintained significantly more viable cells compared to other investigated groups. Conclusion: The group of angular 3D-ptinted constructs has illustrated promising properties for cardiac tissue engineering by providing high cell viability for both endothelial and cardiac cells, high mechanical strength as well as appropriate swelling, and degradation properties during 21 days of incubation. Statement of Significance: 3D-printing is an emerging method to create complex constructs with high precision in a large scale. In this study, we have demonstrated that 3D-printing can be used to create compatible constructs from the composite of Alg and Gel with endothelial cells and cardiac cells. Also, we have demonstrated that these constructs are able to enhance the viability of cardiac and endothelial cells via creating a 3D structure mimicking the alignment and orientation of the fibers in the native heart.

Recent Advances in Strategies to Combat Bacterial Drug Resistance: Antimicrobial Materials and Drug Delivery Systems

Bacterial infection is a common clinical disease. Antibiotics have saved countless lives since their discovery and are a powerful weapon in the fight against bacteria. However, with the widespread use of antibiotics, the problem of drug resistance now poses a great threat to human health. In recent years, studies have investigated approaches to combat bacterial resistance. Several antimicrobial materials and drug delivery systems have emerged as promising strategies. Nano-drug delivery systems for antibiotics can reduce the resistance to antibiotics and extend the lifespan of novel antibiotics, and they allow targeting drug delivery compared to conventional antibiotics. This review highlights the mechanistic insights of using different strategies to combat drug-resistant bacteria and summarizes the recent advancements in antimicrobial materials and drug delivery systems for different carriers. Furthermore, the fundamental properties of combating antimicrobial resistance are discussed, and the current challenges and future perspectives in this field are proposed.

Metal-polyphenol nanodots loaded hollow MnO2 nanoparticles with a "dynamic protection" property for enhanced cancer chemodynamic therapy

Chemodynamic therapy (CDT) is a novel cancer therapeutic strategy. However, barriers such as high glutathione (GSH) concentration and low concentration of metal ions intracellular reduce its treatment effect. In this work, a nanosystem named GA-Fe@HMDN-PEI-PEG with a "dynamic protection" property was reported for enhanced cancer CDT. Mesoporous hollow manganese dioxide (MnO₂) nanoparticle (HMDN) was prepared to load gallic acid-ferrous (GA-Fe) nanodots fabricated from gallic acid (GA) and ferrous ion (Fe²⁺). Then the pores of HMDN were blocked by polyethyleneimine (PEI), which was then grafted with methoxy poly(ethylene glycol) (mPEG) through a pH-sensitive benzoic imine bond. mPEG could protect the nanoparticles (NPs) against the nonspecific uptake by normal cells and enhance their accumulation in the tumor. However, in the slightly acidic tumor microenvironment, hydrolysis of benzoic imine led to DePEGylation to reveal PEI for enhanced uptake by cancer cells. The reaction between HMDN and GSH could consume GSH and obtain manganese ion (Mn²⁺) for the Fenton-like reaction for CDT. GA-Fe nanodots could also offer Fe for the Fenton reaction, and reductive GA could reduce the high-valence ions to low-valence for reusing in Fenton and Fenton-like reactions. These properties allowed GA-Fe@HMDN-PEI-PEG for precise medicine with a high utilization rate and common side effects.

Physically and Chemically Crosslinked, Tannic Acid Embedded Linear PEI-Based Hydrogels and Cryogels with Natural Antibacterial and Antioxidant Properties

Linear polyethyleneimine (L-PEI) was obtained from the acidic hydrolysis of poly(2-ethyl-2-oxazoline) and employed in the synthesis of physically crosslinked L-PEI hydrogel, PC-L-PEIH, chemically crosslinked L-PEI hydrogel, CC-L-PEIH, and cryogels, CC-L-PEIC. The preparation of L-PEI-based hydrogel networks was carried out in two ways: 1) by cooling the L-PEI solution from 90 °C to room temperature, and 2) by crosslinking L-PEI chains with a crosslinker, glycerol diglycidyl ether = 20 °C for CC-L-PEIC. Furthermore, a polyphenolic compound, tannic acid (TA), with superior antibacterial, antioxidant, and anti-inflammatory properties as an active biomedical functional agent, was encapsulated during the synthesis process within L-PEI-based hydrogels and cryogels, at 10% and 25% (w/w) based on the L-PEI amount. A linear and higher TA release was observed from physically crosslinked PEI-based hydrogels containing 10% and 25% TA-containing PC-L-PEI/TAH within 6 h, with 9.5 ± 05 mg/g and 60.2 ± 3.8 mg/g cumulative released amounts, respectively. A higher antioxidant activity was observed for 25% TA containing PC-L-PEI/TAH with 53.6 ± 5.3 µg/mL total phenol content and 0.48 ± 0.01 µmole Trolox equivalent/g. The minimum bactericidal concentration (MBC) of PC-L-PEIH and CC-L-PEIC networks against both E. coli (ATCC 8739) and Gram-positive B. subtilis (ATCC 6633) bacteria was determined at 5 mg/mL, whereas the MBC value of 10 mg/mL for CC-L-PEIH networks against the same bacteria was achieved.

Complexation Preferences of Dynamic Constitutional Frameworks as Adaptive Gene Vectors

The growing applications of therapeutic nucleic acids requires the concomitant development of vectors that are optimized to complex one type of nucleic acid, forming nanoparticles suitable for further trafficking and delivery. While fine-tuning a vector by molecular engineering to obtain a particular nanoscale organization at the nanoparticle level can be a challenging endeavor, we turned the situation around and instead screened the complexation preferences of dynamic constitutional frameworks toward different types of DNAs. Dynamic constitutional frameworks (DCF) are recently-identified vectors by our group that can be prepared in a versatile manner through dynamic covalent chemistry. Herein, we designed and synthesized 40 new DCFs that vary in hydrophilic/hydrophobic balance, number of cationic headgroups. The results of DNA complexation obtained through gel electrophoresis and fluorescent displacement assays reveal binding preferences of different DCFs toward different DNAs. The formation of compact spherical architectures with an optimal diameter of 100-200 nm suggests that condensation into nanoparticles is more effective for longer PEG chains and PEI groups that induce a better binding performance in the presence of DNA targets.

Triton modified polyethyleneimine conjugates assembled with growth arrest-specific protein 6 for androgenetic alopecia transdermal gene therapy

Androgenetic alopecia is an androgen-dependent skin disorder that commonly affects hair follicle growth and hair loss. Gene therapy that can promote the proliferation and survival of hair follicle cells can be a potential choice for its cure. While transdermal application of therapeutic functional nucleic acids across the stratum corneum is quite difficult. Here, we first develop a transdermal agent for functional nucleic acid delivery using Triton X-100-modified low molecular weight polyethyleneimine (PEI-Triton-N, N ​= ​6 or 8). In vitro cell experiments demonstrate that the PEI-Triton-N conjugates can stably encapsulate and efficiently deliver plasmid DNA to hard-to-transfect keratinocyte HaCaT cells. Further mouse model studies show that PEI-Triton-6 can encapsulate and deliver growth arrest-specific protein 6 (Gas6) plasmid through transdermal administration. The transfected Gas6 prolongs the anagen status, inhibits the apoptosis of hair follicle cells, and further promotes the proliferation and differentiation of hair follicle cells. The PEI-Triton-6/pDNA_Gas6 complexes can obviously alleviate hair loss in androgenetic alopecia mice and provides a promising strategy for gene therapy via transdermal administration.

A charged nanocomposite membrane via co-deposition of gallic acid and polyethyleneimine-silver for improving separation and antibacterial properties

Pharmaceuticals have been continuously detected from surface water and groundwater. In order to improve the rejection performance of pharmaceuticals by a nanofiltration membrane (NF), a positively charged membrane was prepared by co-deposition of natural gallic acid and polyethyleneimine on the polyacrylonitrile hydrolysis membrane. Effects of gallic acid concentration, polyethylene imine concentration, reaction time, and the molecular weight of polyethylene imine were documented. The physical and chemical properties of the membrane were also investigated by surface morphology, hydrophilicity, surface charge, and molecular weight cut-off. The optimized membrane had a molecular weight cut-off of about 958 Da and possessed a pure water permeability of 74.21 L·m^-2·h^-1·MPa^-1. The results exhibited salt rejection in the following order: MgCl₂ > CaCl₂ > MgSO₄ > Na₂CO₃ > NaCl > Na₂SO₄, while the rejection ability of pharmaceuticals is as follows: amlodipine > atenolol > carbamazepine > ibuprofen, suggesting that the positively charged membrane has enhanced retention to both divalent cations and charged pharmaceuticals. In addition, the antibacterial membrane was obtained by loading silver nanoparticles onto the positively charged membrane, which greatly improved the antibacterial ability of the membrane.