Organic solid-state lasers: a materials view and future development

Adaptive Helical Chirality in Supramolecular Microcrystals for Circularly Polarized Lasing

Chiral organic molecules offer a promising platform for exploring circularly polarized lasing, which, however, faces a great challenge that the spatial separation of molecular chiral and luminescent centers limits chiroptical activity. Here we develop a helically chiral supramolecular system with completely overlapped chiral and luminescent units for realizing high-performance circularly polarized lasing. Adaptive helical chirality is obtained by incorporating chiral agents into organic microcrystals. Benefiting from the efficient coupling of stimulated emission with the adaptive helical chirality, the supramolecular microcrystals enable high-performance circularly polarized lasing emission with dissymmetry factors up to ~0.7. This work opens up the way to rational design of chiral organic materials for circularly polarized lasing.

Low-threshold distributed feedback laser based on holographic polymer dispersed liquid crystals through the oriented organic semiconductor films

A specific optimized configuration for low threshold organic semiconductor laser based on a holographic polymer dispersed liquid crystal (HPDLC) transmission grating was demonstrated. Here the organic semiconductor films and phase separated liquid crystal (LC) molecules were oriented along the direction of the HPDLC grating grooves. The influence of the organic semiconductor chain orientation and the excitation polarization on the optical properties of the materials has been investigated. Especially, when polymer chain orientation, LC molecules and pump light polarization are consistent with the direction of the grating grooves, the performance of the outgoing laser is greatly improved. Up to 9.78% conversion efficiency with a threshold lower to 0.12 μJ/pulse can be obtained, indicating their potential for high-performance organic optoelectronics.

Crafting 1,4-diaryl spirobifluorene hosts in OLEDs via interannular C-H arylation: synergistic effects of molecular linearity and orthogonality

In this work, we present a design concept of introducing linear structures into the orthogonal configuration of 9,9'-spirobifluorene (SBF), aiming to enhance carrier mobilities while maintaining high triplet energies (E T), which are two critical parameters for optimizing host materials in organic light-emitting diodes (OLEDs). To validate our proposed design, four pivotal model molecules of 1,4-diaryl SBFs were synthesized via interannular C-H arylation of bi(hetero)aryl-2-formaldehydes, a task challenging to accomplish using previous synthetic methodologies. The orthogonal configuration and the steric hindrance of SBF lead to high E T through the conjugation breaking at C1 and C4 positions, rendering 1,4-diaryl SBFs suitable as universal pure hydrocarbon (PHC) hosts for red, green, and blue (RGB) phosphorescent OLEDs (PhOLEDs). Meanwhile, the linearity and relatively good planarity of the para-quaterphenyl structure promote high carrier mobilities through orderly intermolecular packing. The synergistic effects of linearity and orthogonality in 1-(para-biphenyl)-4-phenyl-SBF result in exceptional device performance with external quantum efficiencies (EQEs) of 26.0%, 26.1%, and 22.5% for RGB PhOLEDs, respectively. Notably, the green PhOLED exhibits minimal efficiency roll-off, positioning its device performances among the state-of-the-art in PHC hosts.

[4]Rhombene: Solution-Phase Synthesis and Application in Distributed Feedback Lasers With Emission Beyond 830 nm

Graphene-like molecules with multiple zigzag edges are emerging as promising gain materials for organic lasers. Their emission wavelengths can vary widely, ranging from visible to near-infrared (NIR), as the molecular size increases. Specifically, rhombus-shaped molecular graphenes with two pairs of parallel zigzag edges, known as [n]rhombenes, are excellent candidates for NIR lasers due to their small energy gaps. However, synthesizing large-size rhombenes with emission beyond 800 nm in solution remains a significant challenge. In this study, we present a straightforward synthesis of an aryl-substituted [4]rhombene derivative, [4]RB-Ar, using a method that combines intramolecular radical-radical coupling with Bi(OTf)3-mediated cyclization of vinyl ethers. The structure of [4]RB-Ar was confirmed through X-ray crystallographic analysis. Bond length analysis and theoretical calculations indicate that aromatic sextets are predominantly localized along the molecule's long axis. Significantly, [4]RB-Ar demonstrates narrow amplified spontaneous emission at around 834 nm when dispersed in polystyrene thin films. Moreover, solution-processed distributed feedback lasers employing [4]RB-Ar as the active gain material display tunable narrow emissions in the range of 830 to 844 nm.

Synthesis of Intrinsically-Fluorescent Aliphatic Tautomeric Polymers for Proton-Conductivity, Dual-State Emission, and Sensing/Oxidation-Reduction of Metal Ions

Herein, fluorescent conducting tautomeric polymers (FCTPs) are developed by polymerizing 2-methylprop-2-enoic acid (MPEA), methyl-2-methylpropenoate (MMP), N-(propan-2-yl)prop-2-enamide (PPE), and in situ-anchored 3-(N-(propan-2-yl)prop-2-enamido)-2-methylpropanoic acid (PPEMPA). Among as-synthesized FCTPs, the most promising characteristics in FCTP3 are confirmed by NMR and Fourier transform infrared (FTIR) spectroscopies, luminescence enhancements, and computational studies. In FCTP3, ─C(═O)NH─, -C(═O)N<, ─C(═O)OH, and ─C(═O)OCH3 subluminophores are identified by theoretical calculations and experimental analyses. These subluminophores facilitate redox characteristics, solid state emissions, aggregation-enhanced emissions (AEEs), excited-state intramolecular proton transfer (ESIPT), and conductivities in FCTP3. The ESIPT-associated dual emission/AEEs of FCTP3 are elucidated by time correlated single photon counting (TCSPC) investigation, solvent polarity effects, concentration-dependent emissions, dynamic light scattering (DLS) measurements, field emission scanning electron microscopy images, and computational calculations. The cyclic voltammetry measurements of FCTP3 indicate cumulative redox efficacy of ─C(═O)OH, ─C(═O)NH─/-C(═O)N<, ─C(─O─)═NH+─/─C(─O─)═N+, and ─C(═N)OH functionalities. In FCTP3, ESIPT-associated dual-emission enable in the selective detection of Cr(III)/Cu(II) at λem1/λem2 with the limit of detection of 0.0343/0.079 ppb. The preferential interaction of Cr(III)/Cu(II) with FCTP3 (amide)/FCTP3 (imidol) and oxidation/reduction of Cr(III)/Cu(II) to Cr(VI)/Cu(I) are further supported by NMR-titration; FTIR and X-ray photoelectron spectroscopy analyses; TCSPC/electrochemical/DLS measurement; alongside theoretical calculations. The proton conductivity of FCTP3 is explored by electrochemical impedance spectroscopy and I-V measurements.

Dual-state emission and two-wavelength amplified spontaneous emission behaviors observed from symmetric dyes based on functionalized fluorene and benzotriazole units

Structurally symmetric dyes using functionalized fluorenes and benzotriazole as the main building moieties have been synthesized and found to exhibit efficient dual-state emission (DSE) and interesting two-wavelength or dual amplified spontaneous emission (dual-ASE) behaviors in the solution phase, which may benefit the development of organic gain materials with dual-wavelength amplification.

Doubly Spiro-Conjugated Chiral Carbocycles Exhibiting SOMO-HOMO Inversion in Persistent Radical Cations

Persistent chiral organic open-shell systems have captured growing interest due to their potential applications in organic spintronic and optoelectronic devices. Nevertheless, the integration of configurationally stable chirality into an organic open-shell system continues to pose challenges in molecular design. The π-extended skeleton incorporated in spiro-conjugated carbocycles can provide robust chiroptical properties and a significant stabilization of the excited and ionic radical states. However, this approach has been relatively less explored in the design of persistent organic open-shell systems. We report here the (S,S)-, (R,R)-, and meso-isomers of doubly spiro-conjugated carbocycles featuring flat and rigid carbon-bridged para-phenylenevinylene (CPV) of different conjugation lengths connected by two spiro-carbon centers, which we denote D-spiro-CPV for its quasi-dimeric structure. Our synthetic method based on a double lithiation cyclization approach enables facile production of D-spiro-CPV. D-spiro-CPVs exhibit circularly polarized luminescence (CPL) with high fluorescence quantum yields (ΦFL) resulting in a high CPL brightness of 21 M-1 cm-1 and also exhibit high thermal and photostability. The monoradical cation of D-spiro-CPV absorbing near-infrared light is notably persistent, exhibiting a half-life of 570 h under ambient conditions due to doubly spiro-conjugative stabilization. Theoretical and electrochemical studies indicate the radical cation of D-spiro-CPVs presents a non-Aufbau electron filling, exhibiting inversion of the energy level of the singly occupied molecular orbital (SOMO) and the highest (doubly) occupied molecular orbitals with the SOMO level even below the HOMO-1 level (double SHI effect). Our discoveries provide valuable insights into non-Aufbau molecules and the development of configurationally stable, optically active persistent radicals.

Progress and Perspective toward Continuous-Wave Organic Solid-State Lasers

A continuous-wave (CW) organic solid-state laser is highly desirable for spectroscopy, sensing, and communications, but is a significant challenge in optoelectronics. The accumulation of long-lived triplet excitons and relevant excited-state absorptions, as well as singlet-triplet annihilation, are the main obstacles to CW lasing. Here, progress in singlet- and triplet-state utilizations in organic gain media is reviewed to reveal the issues in working with triplets. Then, exciton behaviors that inhibit light oscillations during long excitation pulses are discussed. Further, recent advances in increasing organic lasing pulse widths from microseconds toward the indication of CW operation are summarized with respect to molecular designs, advanced resonator architectures, triplet scavenging, and potential triplet contribution strategies. Finally, future directions and perspectives are proposed for achieving stable CW organic lasers with significant triplet contribution.

1,2,3,4-Tetrafluorobiphenylene: A Prototype Janus-Headed Scaffold for Ambipolar Materials

The title compound was synthesized by Ullmann cross-coupling in low yield as the first representative of [n]phenylene containing hydrocarbon and fluorocarbon rings. Stille/Suzuki-Miyaura cross-coupling reactions, as well as substitution of fluorine in suitable starting compounds, failed to give the same product. The geometric and electronic structures of the title compound were studied by X-ray diffraction, cyclic voltammetry and density functional theory calculations, together with Hirshfeld surface and reduced density gradient analyses. The crystal structure features head-to-tail π-stacking and other fluorine-related secondary bonding interactions. From the nucleus-independent chemical shifts descriptor, the four-membered ring of the title compound is antiaromatic, and the six-membered rings are aromatic. The Janus molecule is highly polarized; and the six-membered fluoro- and hydrocarbon rings are Lewis π-acidic and π-basic, respectively. The electrochemically-generated radical cation of the title compound is long-lived as characterized by electron paramagnetic resonance, whereas the radical anion is unstable in solution. The title compound reveals electrical properties of an insulator. On expanding its molecular scaffold towards partially fluorinated [n]phenylenes (n≥2), the properties presumably can be transformed into those of semiconductors. In this context, the title compound is suggested as a prototype scaffold for ambipolar materials for organic electronics and spintronics.

Lasing in Low-Dimensional Crystals of a Fumaronitrile-Based Luminogen

Low-dimensional structures are ideal for organic laser media because of their efficient waveguide, photon confinement, and stimulated emission. Control of the structure and alignment of luminescent molecules is very important for realizing laser media. Here, we fabricate low-dimensional crystals of bis(biphenyl)fumaronitrile (BPFN), which is an aggregation-induced emission luminogen. The BPFN molecule contains fumaronitrile, which displays solid-state luminescence, and biphenyl, which forms low-dimensional structures through dipole-dipole interactions. Solvent diffusion yielded two-dimensional platelet crystals of BPFN with strong dipole-dipole CH-π interactions. The high photoluminescence quantum efficiency of 0.46 and uniaxially aligned molecular π-electronic transition dipole moment in the two-dimensional crystals of BPFN resulted in optically pumped lasing even when using an optical excitation source with a long pulse duration (∼5 ns). One-dimensional BPFN crystals obtained via epitaxial growth on the cleaved surface of a KBr single crystal also displayed lasing behavior.

Exploring the Theoretical Foundations of Thermally Activated Delayed Fluorescence (TADF) Emission: A Comprehensive TD-DFT Study on Phenothiazine Systems

This study conducts a thorough theoretical investigation of Thermally Activated Delayed Fluorescence (TADF) in phenothiazine-based systems, examining ten molecular configurations recognized experimentally as TADF-active. Employing Time-Dependent Density Functional Theory (TD-DFT), our analysis spans the investigation of singlet-triplet energy gaps (ΔEST), spin-orbit coupling, and excitation characteristics using Multiwfn. This approach not only validates the adherence to El Sayed's rule across these systems but also provides a detailed understanding of charge transfer dynamics, as visualized through heat maps. A significant aspect of our study is the exploration of different oxidation states of sulfur and site substitutions on phenothiazine. This systematic variation aims to identify additional TADF-active compounds, drawing parallels with properties characterizing other known TADF emitters. Our investigation into Reverse Intersystem Crossing (rISC) rates and the analysis of dihedral angles in relation to ΔEST values offer nuanced insights into the TADF behaviours of these molecules. By integrating rigorous computational analysis with practical implications, we provide a foundational understanding that enhances the design and optimization of phenothiazine-based materials for optoelectronic applications. This work not only advances our theoretical understanding of TADF in phenothiazine derivatives but also serves as a guide for experimentalists and industry professionals in the strategic design of new TADF materials.

Device parameter to evaluate exciton energy transfer in organic whispering-gallery-mode microresonators and its dependence on the amplified spontaneous emission threshold

Exciton energy transfer in organic whispering-gallery-mode (WGM) resonators and its effect on the amplified spontaneous emission (ASE) threshold have been investigated using the stilbene-based energy donor 4,4'-bis[(N-carbazole)styryl]biphenyl (BSB-Cz) and the coumarin-based energy acceptor 2,3,6,7-tetrahydro-1,1,7,7,-tetramethyl-1H,5H,11H-10-(2-benzothiazolyl)quinolizino[9,9a,1gh]coumarin (C545T). Using the stacked-layer structure of BSB-Cz/C545T/BSB-Cz, we fabricated bowl-shaped microresonators on silica microspheres with a total thickness of 250 nm fixing the thickness of the C545T layer to 1 nm. The ASE threshold depended on the thicknesses of the top and bottom BSB-Cz layers, which affect the magnitude of the energy transfer. To assess the relationship between the ASE threshold and energy transfer, we developed a device parameter to evaluate the magnitude of the energy transfer by formulating the rate equations. We found that ASE easily occurs under the condition that the C545T molecules become unable to accept energy from the BSB-Cz excitons owing to the high exciton density of C545T, and that the ASE threshold decreases with decreasing device parameter. The device parameter is useful for optimizing microresonator structures in multi-component organic WGM resonators that utilize energy transfer.

A Rigid Multiple Resonance Thermally Activated Delayed Fluorescence Core Toward Stable Electroluminescence and Lasing

The investigation of organic light-emitting diodes (OLEDs) and organic laser devices with thermally activated delayed fluorescence (TADF) molecules is emerging due to the potential of harnessing triplets. In this work, a boron/nitrogen multiple-resonance TADF polycyclic framework fusing carbazole units (CzBNPh) was proposed. CzBNPh exhibited a narrowband emission (<30 nm), a unity photoluminescence quantum yield, and a fast radiative rate. Consequently, CzBNPh demonstrated a low distributed feedback (DFB) lasing threshold of 0.68 μJ cm-2 . Furthermore, the stimulated emission zone of CzBNPh was effectively separated from its singlet and triplet absorption, thereby minimizing the singlet-triplet annihilation under long-pulsed excitation ranging from 20 μs to 2.5 ms. Significantly, the enhanced rigid molecular conformation, thermal stability, and photo-stability resulted in improved lasing and electroluminescence stability compared to that of 5,9-diphenyl-5,9-diaza-13b-boranaphtho[3,2,1-de]anthracene (DABNA)-core. These findings indicate the potential of CzBN-core as a promising framework for achieving long-pulsed wave and electrically-pumped lasing in the future.

Water Fraction Dependence of the Aggregation Behavior of Hydrophobic Fluorescent Solutes in Water-Tetrahydrofuran

This work investigates the water fraction dependence of the aggregation behavior of hydrophobic solutes in water-tetrahydrofuran (THF) and the elucidation of the role of THF using fluorescence microscopy, dynamic light scattering, neutron and X-ray scattering, and photoluminescence measurements. On the basis of the obtained results, the following model is proposed: hydrophobic molecules are molecularly dispersed in the low-water-content region (10-20 vol %), while they form mesoscopic particles upon increasing the water fraction to ∼30 vol %. This abrupt change is due to the composition fluctuation of the water-THF binary system to form hydrophobic areas in THF, followed by THF-rich droplets where hydrophobic solutes are incorporated and form loose aggregates. Further increasing the water content prompts the desolvation of THF, which decreases the particle size and generates tight aggregates of solute molecules. This model is consistent with the luminescence behavior of the solutes and will be helpful to control the aggregation state of hydrophobic solutes in various applications.

meta-Fluorophores: an uncharted ocean of opportunities

meta-Fluorophores (MFs) are unique ultra-light (in terms of molecular weight (MW)) fluorophores exhibiting luminescence with a wide colour gamut ranging from blue to the NIR. Single benzenic MFs are easy to synthesize, are quite bright (with photoluminescence quantum yield (PLQY) as high as 63%) and exhibit very large Stokes shift (as high as 260 nm (8965 cm-1)), with large solvatochromic shift (as high as 175 nm), and very long excited-state-lifetime (as high as 26 ns) for such ultra-light fluorophores. An emission maximum of ≥600 nm has been achieved with an MF in a polar medium having a MW of only 177 g mol-1 and in a nonpolar medium having MW of only 255 g mol-1; therefore, a large-sized π-conjugated para-fluorophore is no longer a prerequisite for red/NIR emission. Structurally varied MFs pave the way for creating an ocean of opportunities and are thus promising for replacing para-fluorophores for different applications, ranging from bioimaging to LEDs.

Dibenzothiophene Sulfone-Based Ambipolar-Transporting Blue-Emissive Organic Semiconductors Towards Simple-Structured Organic Light-Emitting Transistors

The development of blue-emissive ambipolar organic semiconductor is an arduous target due to the large energy gap, but is an indispensable part for electroluminescent device, especially for the transformative display technology of simple-structured organic light-emitting transistor (SS-OLET). Herein, we designed and synthesized two new dibenzothiophene sulfone-based high mobility blue-emissive organic semiconductors (DNaDBSOs), which demonstrate superior optical property with solid-state photoluminescent quantum yield of 46-67 % and typical ambipolar-transporting properties in SS-OLETs with symmetric gold electrodes. Comprehensive experimental and theoretical characterizations reveal the natural of ambipolar property for such blue-emissive DNaDBSOs-based materials is ascribed to a synergistic effect on lowering LUMO level and reduced electron injection barrier induced by the interfacial dipoles effect on gold electrodes due to the incorporation of appropriate DBSO unit. Finally, efficient electroluminescence properties with high-quality blue emission (CIE (0.179, 0.119)) and a narrow full-width at half-maximum of 48 nm are achieved for DNaDBSO-based SS-OLET, showing good spatial control of the recombination zone in conducting channel. This work provides a new avenue for designing ambipolar emissive organic semiconductors by incorporating the synergistic effect of energy level regulation and molecular-metal interaction, which would advance the development of superior optoelectronic materials and their high-density integrated optoelectronic devices and circuits.

Investigating the Use of Coumarin Derivatives as Lasers

A benzene ring and a lactone ring combine to form the chemical coumarin. Dye lasers have made significant advances in laser technology. The coumarin molecule itself is a non-fluorescent but it displays high fluorescence when electron-denoting substituents such as sulfonamide, benzopyrone, amine, benzothiazole, hydroxyl, methoxy are substituted at various positions. Substituted coumarin possesses the highest energy properties, photostability, and alteration in electron mobility, and therefore could be effectively used as dye lasers. These are considered some of the best fluorophores due to their outstanding photophysical and photochemical properties, which include high fluorescence quantum yields, great photostability, good functionality, and a wide spectrum range. Various inorganic materials are used in classic laser technology to generate the necessary emission. Inorganic lasers come in various types and can emit light in the electromagnetic spectrum's ultraviolet, visible, or infrared parts. Inorganic lasers have certain limitations, which is why coumarin lasers are becoming increasingly popular due to their many advantages. Compared to inorganic lasers, dye lasers offer far better tunability and cover the entire visible and near-infrared range. They only emit at very few specific wavelengths and in extremely narrow bands. The property is therefore presented in this review.

Molecular torsion controls the excited state relaxation pathways of multibranched tetraphenylpyrazines: effect of substitution of morpholine vs. phenoxazine

Multibranched donor-acceptor derivatives exhibiting desirable photophysical properties are efficiently used in optoelectronic devices, in which the excited state relaxation dynamics of the derivatives control the efficiency of the devices. Here, the effect of intramolecular torsion on the excited state relaxation dynamics of tetraphenylpyrazine (TPP) derivatives in non-polar (toluene) and polar (THF) solvents is investigated by substituting the electron donor of morpholine (TPP-4MOP) and phenoxazine (TPP-4PHO) leading to the planar and twisted configurations, respectively, using femtosecond and nanosecond transient absorption spectroscopy. In the steady state, TPP-4MOP showed feeble emission (ΦF ∼0.03) due to the weak donor by the delocalization of electron density supported by theoretical optimization. The TPP-4PHO exhibited strong emission (ΦF ∼0.18) in toluene compared to that in THF, in which it showed a large Stokes shift (∼9691 cm-1) with low fluorescence quantum yield (ΦF ∼0.01). The observation of large Stokes shifts, inherent nature and theoretical calculations of TPP-4PHO suggest the twisting of the dihedral angle between tetraphenylpyrazine and phenoxazine in the excited state leading to the twisted intramolecular charge transfer state (TICT). The femtosecond and nanosecond transient absorption and picosecond time-resolved emission spectra of TPP-4PHO revealed the signature of the existence of both the partial TICT and TICT states in THF leading to the triplet state. Whereas in the case of TPP-4MOP, the transient absorption spectra showed the formation of the triplet state from the local excited state without the involvement of the TICT state. Aggregation studies of TPP-4PHO in a THF and water mixture reflect the elimination of the TICT state by the restriction of intramolecular torsion in the aggregates leading to an increase of 12-fold of the fluorescence intensity along with shifting of the maximum towards the blue region. These studies revealed that the excited state relaxation pathways of the derivatives are controlled by polarity-dependent torsional motion.

Engineering Soluble Diketopyrrolopyrrole Chromophore Stacks from a Series of Pd(II)-Based Ravels

A strategy to engineer the stacking of diketopyrrolopyrrole (DPP) dyes based on non-statistical metallosupramolecular self-assembly is introduced. For this, the DPP backbone is equipped with nitrogen-based donors that allow for different discrete assemblies to be formed upon the addition of Pd(II), distinguished by the number of π-stacked chromophores. A Pd3 L6 three-ring, a heteroleptic Pd2 L2 L'2 ravel composed of two crossing DPPs (flanked by two carbazoles), and two unprecedented self-penetrated motifs (a Pd2 L3 triple and a Pd2 L4 quadruple stack), were obtained and systematically investigated. With increasing counts of stacked chromophores, UV/Vis absorptions red-shift and emission intensities decrease, except for compound Pd2 L2 L'2 , which stands out with an exceptional photoluminescence quantum yield of 51 %. This is extraordinary for open-shell metal containing assemblies and explainable by an intra-assembly FRET process. The modular design and synthesis of soluble multi-chromophore building blocks offers the potential for the preparation of nanodevices and materials with applications in sensing, photo-redox catalysis and optics.

Continuous-Wave Raman Lasing from Metal-Linked Organic Dimer Microcrystals

Stimulated Raman scattering offers an alternative strategy to explore continuous-wave (c.w.) organic lasers, which, however, still suffers from the limitation of inadequate Raman gain in organic material systems. Here we propose a metal-linking approach to enhance the Raman gain of organic molecules. Self-assembled microcrystals of the metal linked organic dimers exhibit large Raman gain, therefore allowing for c.w. Raman lasing. Furthermore, broadband tunable Raman lasing is achieved in the organic dimer microcrystals by adjusting excitation wavelengths. This work advances the understanding of Raman gain in organic molecules, paving a way for the design of c.w. organic lasers.

Quantum Dynamical Approach to Predicting the Optical Pumping Threshold for Lasing in Organic Materials

The quantum dynamic (QD) study of organic lasing (OL) is a challenging issue in organic optoelectronics. Previously, the phenomenological method has achieved success in describing experimental observation. However, it cannot directly bridge the laser threshold (LT) with microscopic parameters, which is the advantage of the QD method. In this paper, we propose a microscopic OL model and apply time-dependent wave packet diffusion to reveal the microscopic QD process of optically pumped lasing. LT is obtained from the onset of output as a function of optical input pumping. We predict that the LT has an optimal value as a function of the cavity volume and depends linearly on the intracavity photon leakage rate. The calculated structure-property relationships between molecular parameters and the LT are in qualitative agreement with the experimental results, confirming the reliability of our approach. This work is beneficial for understanding the OL mechanism and optimizing the design of organic laser materials.

Single-Component Color-Tunable Smart Organic Emitters with Simultaneous Multistage Stimuli-Responsiveness and Multimode Emissions

Achieving color-tunable emission in single-component organic emitters with multistage stimuli-responsiveness is of vital significance for intelligent optoelectronic applications, but remains enormously challenging. Herein, we present an unprecedented example of a color-tunable single-component smart organic emitter (DDOP) that simultaneously exhibits multistage stimuli-responsiveness and multimode emissions. DDOP based on a highly twisted amide-bridged donor-acceptor-donor structure has been found to facilitate intersystem crossing, form multimode emissions, and generate multiple emissive species with multistage stimuli-responsiveness. DDOP pristine crystalline powders exhibit abnormal excitation-dependent emissions from a monomer-dominated blue emission centered at 470 nm to a dimer-dominated yellow emission centered at 550 nm through decreasing the ultraviolet (UV) excitation wavelengths, whereas DDOP single crystals show a wide emission band with a main emission peak at 585 nm when excited at different wavelengths. The emission behaviors of pristine crystalline powders and single crystals are different, demonstrating emission features that are closely related to the aggregation states. The work has developed color-tunable single-component organic emitters with simultaneous multistage stimuli-responsiveness and multimode emissions, which is vital for expanding intelligent optoelectronic applications, including multilevel information encryption, multicolor emissive patterns, and visual monitoring of UV wavelengths.

Tailoring D-π-A architectures with hybridized local and charge transfer fluorophores exhibiting high electroluminescence exciton utilization and low threshold amplified spontaneous emission

Novel amorphous compounds which could simultaneously use 25% singlet excitons and 75% triplet excitons as the energy source for light amplification enable the reduction of the threshold current density for electrically pumped organic semiconductor laser diodes (OSLDs); however, there is always a trade-off between the high radiative decay rate of the local excited (LE) state that is required for amplified spontaneous emission (ASE) and high exciton utilization benefiting from the charge-transfer (CT) state during electroluminescence (EL). Herein, we have explored a delicate balance to achieve both low ASE threshold and high EL exciton utilization by adopting a carefully tailored hybridized local and charge-transfer (HLCT) molecular design. A series of donor-π-acceptor (D-π-A) molecules (SBz-1, SBz-2 and SBz-3) are synthesized, and the structural change mainly refers to the spatial distance between D and A which could regulate the excited-state character via adjusting the CT length. Notably, the ASE phenomenon with a low threshold (2.97 μJ cm-2) and a high exciton utilization of 57.6% are achieved at the same time for SBz-2 with an appropriate CT length. The results provide guidance for molecular design toward harvesting triplet excitons in organic laser materials.

Electrically driven organic laser using integrated OLED pumping

Organic semiconductors are carbon-based materials that combine optoelectronic properties with simple fabrication and the scope for tuning by changing their chemical structure1-3. They have been successfully used to make organic light-emitting diodes2,4,5 (OLEDs, now widely found in mobile phone displays and televisions), solar cells1, transistors6 and sensors7. However, making electrically driven organic semiconductor lasers is very challenging8,9. It is difficult because organic semiconductors typically support only low current densities, suffer substantial absorption from injected charges and triplets, and have additional losses due to contacts10,11. In short, injecting charges into the gain medium leads to intolerable losses. Here we take an alternative approach in which charge injection and lasing are spatially separated, thereby greatly reducing losses. We achieve this by developing an integrated device structure that efficiently couples an OLED, with exceptionally high internal-light generation, with a polymer distributed feedback laser. Under the electrical driving of the integrated structure, we observe a threshold in light output versus drive current, with a narrow emission spectrum and the formation of a beam above the threshold. These observations confirm lasing. Our results provide an organic electronic device that has not been previously demonstrated, and show that indirect electrical pumping by an OLED is a very effective way of realizing an electrically driven organic semiconductor laser. This provides an approach to visible lasers that could see applications in spectroscopy, metrology and sensing.

Phonon engineering in Yb:La2CaB10O19 crystal for extended lasing beyond the fluorescence spectrum

Since the first invention of the laser in 1960, direct lasing outside the fluorescence spectrum is deemed impossible owing to the "zero-gain" cross-section. However, when electron-phonon coupling meets laser oscillation, an energy modulation by the quantized phonon can tailor the electronic transitions, thus directly creating some unprecedented lasers with extended wavelengths by phonon engineering. Here, we demonstrate a broadband lasing (1000-1280 nm) in a Yb-doped La2CaB10O19 (Yb:LCB) crystal, far beyond its spontaneous fluorescence spectrum. Numerical calculations and in situ Raman verify that such a substantial laser emission is devoted to the multiphonon coupling to lattice vibrations of a dangling "quasi-free-oxygen" site, with the increasing phonon numbers step-by-step (n = 1-6). This new structural motif provides more alternative candidates with strong-coupling laser materials. Moreover, the quantitative relations between phonon density distribution and laser wavelength extension are discussed. These results give rise to the search for on-demand lasers in the darkness and pave a reliable guideline to study those intriguing electron-phonon-photon coupled systems for integrated photonic applications.

Hybridized Local and Charge-Transfer Excited-State Emitter for a Blue Organic Solid-State Laser

The use of triplet excitons harvesting and short exciton lifetime organic emitters is important to improve the exciton utilization in organic semiconductor laser diodes. In this study, a hybridized local and charge-transfer (HLCT)-type molecule, 11-(3-(10-(4-(1-phenyl-1H-phenanthro[9,10-d]imidazol-2-yl)phenyl)anthracen-9-yl)phenyl)-11H-benzofuro[3,2-b]carbazole (PhAnMBf), is used as an emitter for blue-emitting organic solid-state lasers (OSSLs). The short exciton lifetime and high photoluminescence quantum yield of the PhAnMBf emitter allowed the fabrication of an organic laser with an emission wavelength of 453 nm, a small full width at half-maximum of 1.2 nm, and a threshold of 105 nJ/pulse, corresponding to 44 μJ/cm², on the distributed feedback substrate. The anthracene-based PhAnMBf material showed the potential of the HLCT emitter as an OSSL.

80-μs pulsewidth from a circulation-free diode-pumped liquid organic laser limited by thermal blooming

Continuous-wave laser emission is challenging to obtain in organic lasers, whether in the solid or liquid form, a limitation caused by long-lived triplet states and by thermal effects. In liquid dye lasers, both issues can be fixed by rapidly flowing the dye, which is technically complex and prevents those lasers to be further miniaturized or easily integrated. Here we address the issue of the maximal pulsewidth that can be obtained in liquid dye lasers in the absence of any dye flow, in a compact and cost-effective diode-pumped laser system. Pulses as long as 80 μs have been obtained, thanks to the combination of a hemispherical resonator design, almost insensitive to thermal-lens effects, and an intentional mismatch between pump and cavity spatial modes. The limitation in pulse duration is shown to be entirely due to thermal blooming, and more specifically to diffraction losses brought by the spherical aberration of the thermal lens.

Weak noncovalent interactions in two positional isomers of acrylonitrile derivatives: inputs from PIXEL energy, Hirshfeld surface and QTAIM analyses

A single crystal X-ray diffraction analysis was performed on two positional isomers (m-tolyl and p-tolyl) of acrylonitrile derivatives, namely, (Z)-3-(4-(pyridin-2-yl) phenyl)-2-(m-tolyl) acrylonitrile (1) and (Z)-3-(4-(pyridin-2-yl)phenyl)-2-(p-tolyl) acrylonitrile (2). Compound 1 crystallized in the monoclinic P2₁/n space group with two crystallographically independent molecules. Compound 2 also possesses two crystallographically independent molecules and crystallized in the triclinic P-1 space group. The Hirshfeld surface analysis revealed that, in both isomers, intermolecular H⋅⋅⋅H/C/N contacts contribute significantly to the crystal packing. More than 40% of the contribution arises from intermolecular C-H⋅⋅⋅C(π) contacts. In both compounds, the relative contribution of these contacts is comparable, indicating that the positional isomeric effects are marginal. The structures in which these isomers are arranged in the solid state are very similar, and the lattice energies are also comparable between the isomers. The Coulomb-London-Pauli-PIXEL (CLP-PIXEL) energy analysis identified the energetically significant dimers. The strength of the intra- and intermolecular interactions was evaluated using the quantum theory of atoms in molecules approach. The UV-Vis absorbance in three different solvents (chloroform, ethanol, and ethyl acetate) for isomers 1 and 2 are very similar. This result is in good agreement with the time-dependent density-functional theory (TD-DFT) calculations.

Preparation and Characterization of Carbazole-Based Luminogen with Efficient Emission in Solid and Solution States

Organic luminescent materials with high luminescence efficiency in both solution and solid states, namely dual-state emission (DSE), have attracted considerable attention due to their promising applications in various fields. In order to enrich the variety of DSE materials, carbazole, similar to triphenylamine (TPA), was utilized to construct a novel DSE luminogen named 2-(4-(9H-carbazol-9-yl)phenyl)benzo[d]thiazole (CZ-BT). CZ-BT exhibited DSE characteristics with fluorescence quantum yields of 70, 38 and 75% in solution, amorphous and crystalline states, respectively. CZ-BT shows thermochromic and mechanochromic properties in solution and solids, respectively. Theoretical calculations show that there is a small conformational difference between the ground state and the lowest singly excited state of CZ-BT and that it exhibits a low non-radiative transition characteristic. The oscillator strength during the transition from the single excited state to the ground state reaches 1.0442. CZ-BT adopts a distorted molecular conformation with intramolecular hindrance effects. The excellent DSE properties of CZ-BT can be explained well using theoretical calculations and experimental results. In terms of application, the CZ-BT has a detection limit for the hazardous substance picric acid of 2.81 × 10^-7 mol/L.

Toward Nonepitaxial Laser Diodes

Thin-film organic, colloidal quantum dot, and metal halide perovskite semiconductors are all being pursued in the quest for a wavelength-tunable diode laser technology that does not require epitaxial growth on a traditional semiconductor substrate. Despite promising demonstrations of efficient light-emitting diodes and low-threshold optically pumped lasing in each case, there are still fundamental and practical barriers that must be overcome to reliably achieve injection lasing. This review outlines the historical development and recent advances of each material system on the path to a diode laser. Common challenges in resonator design, electrical injection, and heat dissipation are highlighted, as well as the different optical gain physics that make each system unique. The evidence to date suggests that continued progress for organic and colloidal quantum dot laser diodes will likely hinge on the development of new materials or indirect pumping schemes, while improvements in device architecture and film processing are most critical for perovskite lasers. In all cases, systematic progress will require methods that can quantify how close new devices get with respect to their electrical lasing thresholds. We conclude by discussing the current status of nonepitaxial laser diodes in the historical context of their epitaxial counterparts, which suggests that there is reason to be optimistic for the future.

Localized Bound Multiexcitons in Engineered Quasi-2D Perovskites Grains at Room Temperature for Efficient Lasers

Reducing the excitation threshold to minimize the Joule heating is critical for the realization of perovskite laser diodes. Although bound excitons are promising for low threshold laser, how to generate them at room temperature for laser applications is still unclear in quasi-2D perovskite-based devices. In this work, via engineering quasi-2D perovskite PEA₂ (CH₃ NH₃ )_{n -1} Pb_n Br_{3 n +1} microscopic grains by the anti-solvent method, room-temperature multiexciton radiative recombination is successfully demonstrated at a remarkably low pump density of 0.97 µJ cm^-2 , which is only one-fourth of that required in 2D CdSe nanosheets. In addition, the well-defined translational momentum in quasi-2D perovskite grains can restrict the Auger recombination which is detrimental to radiative emission. Furthermore, the quasi-2D perovskite grains are favorable for increasing binding energies of excitons and biexcitons and so as the related radiative recombination. Consequently, the prepared <n = 8> phase quasi-2D perovskite film renders a threshold of room-temperature stimulated emission as low as 13.7 µJ cm^-2 , reduced by 58.6% relative to the amorphous counterpart with larger grains. The findings in this work are expected to facilitate the development of solution-processable perovskite multiexcitonic laser diodes.

Organic Synthetic Photonic Systems with Reconfigurable Parity-Time Symmetry Breaking for Tunable Single-Mode Microlasers

Synthetic photonic materials exploiting the quantum concept of parity-time (PT) symmetry lead to an emerging photonic paradigm-non-Hermitian photonics, which is revolutionizing the photonic sciences. The non-Hermitian photonics dealing with the interplay between gain and loss in PT synthetic photonic material systems offers a versatile platform for advancing microlaser technology. However, current PT-symmetric microcavity laser systems only manipulate imaginary parts of the refractive indices, suffering from limited laser spectral bandwidth. Here, an organic composite material system is proposed to synthesize reconfigurable PT-symmetric microcavities with controllable complex refractive indices for realizing tunable single-mode laser outputs. A grayscale electron-beam direct-writing technique is elaborately designed to process laser dye-doped polymer films in one single step into microdisk cavities with periodic gain and loss distribution, which enables thresholdless PT-symmetry breaking and single-mode laser operation. Furthermore, organic photoisomerizable compounds are introduced to reconfigure the PT-symmetric systems in real-time by tailoring the real refractive index of the polymer microresonators, allowing for a dynamically and continuously tunable single-mode laser output. This work fundamentally enhances the PT-symmetric photonic systems for innovative design of synthetic photonic materials and architectures.

Optical Amplification at 637 and 1067 nm Based on Organic Molecule AQ(PhDPA)2 and NdIII Complex Codoped Polymer Waveguides

Based on the molecular energy transfer mechanism, relative gains at 1067 and 637 nm wavelengths are achieved in thermally activated delayed fluorescence molecule AQ(PhDPA)₂ and Nd complex with chelating phosphine oxide as ligands codoped polymer waveguides, with the excitation of low-power UV light-emitting diodes (LEDs) instead of traditional semiconductor lasers as pump sources. For AQ(PhDPA)₂ -Nd(DBTTA)₃ (DBFDPO) (DBTTA = dibenzotetrathienoacene, DBFDPO = 4,6-bis (diphenylphosphoryl) dibenzofuran) -codoped polymethylmethacrylate (PMMA), and AQ(PhDPA)₂ -Nd(DBTTA)₃ (FDPO) (FDPO = 9,9-bis (diphenylphosphorylphenyl) fluorene)-codoped PMMA polymers with a mass ratio of 1:4 respectively, when they are spin-coated as upper claddings, the relative gains of 2.2 and 1.8 dB cm^-1 at 1067 nm are obtained in evanescent-field waveguides with cross-section of 4 × 8 µm² under excitation of 300 mW 405 nm LED, and the gains of 3.9 and 4.9 dB cm^-1 at 637 nm are achieved with pumping of 530 mW 450 nm LED respectively. By growing a 100 nm-thick aluminum reflector with the waveguides, the optical gain at 1067 and 637 nm can be enhanced to 3.5 and 6.1 dB cm^-1 , corresponding to AQ(PhDPA)₂ -Nd(DBTTA)₃ (DBFDPO) and AQ(PhDPA)₂ -Nd(DBTTA)₃ (FDPO)-codoped PMMA polymers, respectively.

Electronic Structures and Charge Mobilities of Several Regioisomeric B2N2-Substituted Perylenediimides

Tunable and rich electronic properties of perylenediimide (PDI), an n-type semiconductor together with its synthetic ease and processibility, make it suitable for various optoelectronic and field-effect transistor applications. The electronic structures, spectroscopic properties, and charge mobilities for a few isoelectronic BN-substituted PDIs (B₂N₂-PDIs) with varied BN-patterning are studied using density functional theory (DFT) and time-dependent DFT employing optimally tuned range-separated hybrid. Two substitutional doping patterns, namely, BNNB and NBBN with zero dipole and also BNBN, the one with a finite dipole, are considered to explore the changes in the PDI properties due to different B₂N₂-substitutions. All three B₂N₂-PDIs are found to be dynamically stable and lie within a small energy window of ca. ∼1.7 kcal mol^-1. An increased electronic gap due to charge localization produces a similar but slightly blue-shifted low-lying optical peak compared to the pristine PDI, in good agreement with the experimental observations. Additionally, differently considered BN patterns result in only slightly varied charge mobilities due to mainly differences in electronic couplings with larger electron mobilities found for the experimentally synthesized BNNB-PDI crystal. On the other hand, small reorganization energy and relatively large coupling for the hole transport produce greater hole mobilities for the NBBN-PDI. Varied nuclear reorganization and electronic coupling are understood by analyzing Huang-Rhys factors associated with normal modes and frontier molecular orbitals, respectively. These results serve as complementary to understanding the recently reported experimental findings and also provide new insights into the impact of different BN patterns on modulating the PDI electronic and charge-transport properties.

Fractal Branched Microwires of Organic Semiconductor with Controlled Branching and Low-Threshold Amplified Spontaneous Emission

Fractals are quite normal in nature. However, fractal self-assembly of organic semiconductors remains challenging. Herein, we develop a facile solution assembly route to access organic microwires (MWs) comprising an oligo(p-phenylenevinylene) derivative (OPV-A) with and without branching. Instead of kinetically controlled β-OPV-A microrods (MRs), thermodynamically favored α-OPV-A gives fractal branching MW patterns. As-prepared 9,10-dicyanoanthracene (DCA) alloyed assemblies function as seeds to allow for the heteroepitaxial growth of branching α-OPV-A MWs via either coassembly or two-step seeded growth. Consequently, fractal MWs with single- and multisite growth were both achieved, accompanied by tailorable branching densities and hierarchies. Thermodynamic control and a well-matched epitaxial relationship should be crucial to the formation of fractal MW patterns. Importantly, the aligned α-OPV-A MW array functions as a multichannel optical gain medium and exhibits low-threshold amplified spontaneous emission (ASE). The present work deepens the research into fractal self-assembly of functional organic semiconductors.

Dome-shaped mode lasing from liquid crystals for full-color lasers and high-sensitivity detection

In this communication, we report a new class of oscillation mode, dome-shaped mode (DSM), in liquid crystal (LC) microlasers. A record high Q-factor over 24 000 is achieved in LC soft-matter microlasers. We successfully presented a proof-of-concept demonstration of red, green, blue (RGB) LC-DSM microlaser pixels with a 74% broader achievable color gamut than the standard RGB color space. Besides, the detection limit for acetone vapor molecules is as low as 0.5 ppm, confirming the excellent potential of the proposed LC-DSM microlaser in ultra-high sensitivity detection.

Redox Active cAAC-Fluorene/Indene Systems Displaying Solvatochromism, Green Luminescence and pH Sensing: Functionalization of Fluorenyl/Indenyl Rings with Radical Carbene

Two new series of air stable compounds of cAAC^X = fluorene/indene (X = Me₂ , Et₂ , Cy) [cAAC = cyclic (alkyl) amino carbene] have been isolated and well characterized by X-ray single crystal diffraction, photoluminescence, cyclic voltammogram (CV) and electron paramagnetic resonance (EPR) studies. Fluorescence studies reveals green light emission of cAAC bonded fluorene, whereas free fluorene generally displays a violet emission. Interestingly, the sterically crowded cAAC-fluorene analogue display solvatochromism and CF₃ CO₂ H sensing in solution. CV of the these compounds show a quasi-reversible electron transfer process, indicating the functionalization of fluorene/indene with radical anionic form of carbene, confirmed by CV/EPR measurements. DFT/TDDFT calculations and energy decomposition analysis coupled with natural orbital for chemical valence (EDA-NOCV) have been carried out to study different aspects of bonding and electronic transitions. Such a class of redox active and thermally stable organic molecules may be suitable for molecule based spin memory devices in future.

Simultaneously improving the quality factor and outcoupling efficiency of organic light-emitting field-effect transistors with planar microcavity

Organic light-emitting field-effect transistors (OLEFETs) are regarded as an ideal device platform to achieve electrically pumped organic semiconductor lasers (OSLs). However, the incorporation of a high-quality resonator into OLEFETs is still challenging since the process usually induces irreparable deterioration to the electric-related emission performance of the device. We here propose a dual distributed Bragg reflector (DBR)-based planar microcavity, which is verified to be highly compatible with the OLEFETs. The dual DBR planar microcavity shows the great advantage of simultaneously promoting the quality (Q) factor and outcoupling efficiency of the device due to the reduced optical loss. As a result, a moderately high Q factor of ∼160, corresponding to EL spectrum linewidth as narrow as 3.2 nm, concomitantly with high outcoupling efficiency (∼7.1%) has been successfully obtained. Our results manifest that the dual DBR-based planar microcavity is a promising type of resonator, which might find potential applications in improving the spectra and efficiency performance of OLEFETs as well as in OLEFET-based electrically pumped OSLs.

In Situ Super-Hindrance-Triggered Multilayer Cracks for Random Lasing in π-Functional Nanopolymer Films

In situ self-assembly of semiconducting emitters into multilayer cracks is a significant solution-processing method to fabricate organic high- Q lasers. However, it is still difficult to realize from conventional conjugated polymers. Herein, we create the molecular super-hindrance-etching technology, based on the π-functional nanopolymer PG-Cz, to modulate multilayer cracks applied in organic single-component random lasers. Massive interface cracks are formed by promoting interchain disentanglement with the super-steric hindrance effect of π-interrupted main chains, and multilayer morphologies with photonic-crystal-like ordering are also generated simultaneously during the drop-casting method. Meanwhile, the enhancement of quantum yields on micrometer-thick films ( Φ = 40% to 50%) ensures high-efficient and ultrastable deep-blue emission. Furthermore, a deep-blue random lasing is achieved with narrow linewidths ~0.08 nm and high-quality factors Q ≈ 5,500 to 6,200. These findings will offer promising pathways of organic π-nanopolymers for the simplification of solution processes applied in lasing devices and wearable photonics.

Light-Responsive Oligothiophenes Incorporating Photochromic Torsional Switches

We present a quaterthiophene and sexithiophene that can reversibly change their effective π-conjugation length through photoexcitation. The reported compounds make use of light-responsive molecular actuators consisting of an azobenzene attached to a bithiophene unit by both direct and linker-assisted bonding. Upon exposure to 350 nm light, the azobenzene undergoes trans-to-cis isomerization, thus mechanically inducing the oligothiophene to assume a planar conformation (extended π-conjugation). Exposure to 254 nm wavelength promotes azobenzene cis-to-trans isomerization, forcing the thiophenic backbones to twist out of planarity (confined π-conjugation). Twisted conformations are also reached by cis-to-trans thermal relaxation at a rate that increases proportionally with the conjugation length of the oligothiophene moiety. The molecular conformations of quaterthiophene and sexithiophene were characterized by using steady-state UV-vis spectroscopy, X-ray crystallography and quantum-chemical modeling. Finally, we tested the proposed light-responsive oligothiophenes in field-effect transistors to probe the photo-induced tuning of their electronic properties.

Emerging laser-assisted vacuum processes for ultra-precision, high-yield manufacturing

Laser technology is a cutting-edge process with a unique photothermal response, precise site selectivity, and remote controllability. Laser technology has recently emerged as a novel tool in the semiconductor, display, and thin film industries by providing additional capabilities to existing high-vacuum equipment. The in situ and in operando laser assistance enables using multiple process environments with a level of complexity unachievable with conventional vacuum equipment. This broadens the usable range of process parameters and directly improves material properties, product precision, and device performance. This review paper examines the recent research trends in laser-assisted vacuum processes (LAVPs) as a vital tool for innovation in next-generation manufacturing processing equipment and addresses the unique characteristics and mechanisms of lasers exclusively used in each study. All the findings suggest that the LAVP can lead to methodological breakthroughs in dry etching, 2D material synthesis, and chemical vapor deposition for optoelectronic devices.

Realization of Single-Crystal Dye Lasers by Taming Charge Transfer in Molecular Self-Assemblies

The large library of organic dye molecules offers almost infinite possibilities for laser design, but still faces a great challenge in achieving pure dye aggregate lasers due to intermolecular quenching. Here, we report a kinetically controlled molecular self-assembly strategy to synthesize unconventional dye microcrystals for lasing. By increasing temperature, the dye self-assembly is transformed from thermodynamic to kinetic control. Unlike the thermodynamic microcrystal products incapable of lasing due to intermolecular charge-transfer-mediated excimer formation, the kinetic dye microcrystals have large intermolecular distances and weak intermolecular interactions, supporting highly efficient intramolecular charge-transfer monomer emission and low-threshold lasing. This work demonstrates single-crystal dye lasers, promising to unleash the full potential of laser dyes in solid-state lasers.

3D-Printed Möbius Microring Lasers: Topology Engineering in Photonic Microstructures

Manipulating photons in artificially structured materials is highly desired in modern photonic technology. Nontrivial topological structures are rapidly emerging as a state-of-art platform for achieving unprecedented fascinating phenomena of photon manipulation. However, the current studies mainly focus on planar structures, and the fabrication of photonic microstructures with specific topological geometric features still remains a great challenge. Extending the topological photonics to 3D microarchitectures is expected to enrich the photon manipulation capabilities and further advance the topological photonic devices. Here, a femtosecond laser direct writing technique is employed to fabricate 3D topological Möbius microring resonators from dye-doped polymer. The high-quality-factor Möbius microring resonator supports a unique spin-orbit coupled lasing at very low threshold. Due to the spin-orbit coupling induced geometric/Berry phase, the Möbius microrings, in striking contrast with ordinary microrings, output laser signals with all polarization states. The manipulation of miniaturized coherent light sources in the fabricated Möbius microrings represents a significant step forward toward 3D topological photonics that offers a novel design philosophy for functional photonic and optoelectronic devices.