Atomic/molecular layer deposition for energy storage and conversion

Chemical Bonding and Crystal Structure Schemes in Atomic/Molecular Layer Deposited Fe-Terephthalate Thin Films

Advanced deposition routes are vital for the growth of functional metal-organic thin films. The gas-phase atomic/molecular layer deposition (ALD/MLD) technique provides solvent-free and uniform nanoscale thin films with unprecedented thickness control and allows straightforward device integration. Most excitingly, the ALD/MLD technique can enable the in situ growth of novel crystalline metal-organic materials. An exquisite example is iron-terephthalate (Fe-BDC), which is one of the most appealing metal-organic framework (MOF) type materials and thus widely studied in bulk form owing to its attractive potential in photocatalysis, biomedicine, and beyond. Resolving the chemistry and structural features of new thin film materials requires an extended selection of characterization and modeling techniques. Here we demonstrate how the unique features of the ALD/MLD grown in situ crystalline Fe-BDC thin films, different from the bulk Fe-BDC MOFs, can be resolved through techniques such as synchrotron grazing-incidence X-ray diffraction (GIXRD), Mössbauer spectroscopy, and resonant inelastic X-ray scattering (RIXS) and crystal structure predictions. The investigations of the Fe-BDC thin films, containing both trivalent and divalent iron, converge toward a novel crystalline Fe(III)-BDC monoclinic phase with space group C2/c and an amorphous Fe(II)-BDC phase. Finally, we demonstrate the excellent thermal stability of our Fe-BDC thin films.

Atomic/molecular layer deposition strategies for enhanced CO2 capture, utilisation and storage materials

Elevated levels of carbon dioxide (CO2) in the atmosphere and the diminishing reserves of fossil fuels have raised profound concerns regarding the resulting consequences of global climate change and the future supply of energy. Hence, the reduction and transformation of CO2 not only mitigates environmental pollution but also generates value-added chemicals, providing a dual remedy to address both energy and environmental challenges. Despite notable advancements, the low conversion efficiency of CO2 remains a major obstacle, largely attributed to its inert chemical nature. It is imperative to engineer catalysts/materials that exhibit high conversion efficiency, selectivity, and stability for CO2 transformation. With unparalleled precision at the atomic level, atomic layer deposition (ALD) and molecular layer deposition (MLD) methods utilize various strategies, including ultrathin modification, overcoating, interlayer coating, area-selective deposition, template-assisted deposition, and sacrificial-layer-assisted deposition, to synthesize numerous novel metal-based materials with diverse structures. These materials, functioning as active materials, passive materials or modifiers, have contributed to the enhancement of catalytic activity, selectivity, and stability, effectively addressing the challenges linked to CO2 transformation. Herein, this review focuses on ALD and MLD's role in fabricating materials for electro-, photo-, photoelectro-, and thermal catalytic CO2 reduction, CO2 capture and separation, and electrochemical CO2 sensing. Significant emphasis is dedicated to the ALD and MLD designed materials, their crucial role in enhancing performance, and exploring the relationship between their structures and catalytic activities for CO2 transformation. Finally, this comprehensive review presents the summary, challenges and prospects for ALD and MLD-designed materials for CO2 transformation.

Advances in morphology-controlled alumina and its supported Pd catalysts: synthesis and applications

Alumina materials, as one of the cornerstones of the modern chemical industry, possess physical and chemical properties that include excellent mechanical strength and structure stability, which also make them highly suitable as catalyst supports. Alumina-supported Pd-based catalysts with the advantages of exceptional catalytic performance, flexible regulated surface metal/acid sites, and good regeneration ability have been widely used in many traditional chemical industry fields and have also shown great application prospects in emerging fields. This review aims to provide an overview of the recent advances in alumina and its supported Pd-based catalysts. Specifically, the synthesis strategies, morphology transformation mechanisms, and structural properties of alumina with various morphologies are comprehensively summarized and discussed in-depth. Then, the preparation approaches of Pd/Al2O3 catalysts (impregnation, precipitation, and other emerging methods), as well as the metal-support interactions (MSIs), are revisited. Moreover, Some promising applications have been chosen as representative reactions in fine chemicals, environmental purification, and sustainable development fields to highlight the universal functionality of the alumina-supported Pd-based catalysts. The role of the Pd species, alumina support, promoters, and metal-support interactions in the enhancement of catalytic performance are also discussed. Finally, some challenges and upcoming opportunities in the academic and industrial application of the alumina and its supported Pd-based are presented and put forward.

Outstanding Fill Factor in Inverted Organic Solar Cells with SnO2 by Atomic Layer Deposition

Transport layers are of outmost importance for thin-film solar cells, determining not only their efficiency but also their stability. To bring one of these thin-film technologies toward mass production, many factors besides efficiency and stability become important, including the ease of deposition in a scalable manner and the cost of the different material's layers. Herein, highly efficient organic solar cells (OSCs), in the inverted structure (n-i-p), are demonstrated by using as electron transport layer (ETL) tin oxide (SnO2) deposited by atomic layer deposition (ALD). ALD is an industrial grade technique which can be applied at the wafer level and also in a roll-to-roll configuration. A champion power conversion efficiency (PCE) of 17.26% and a record fill factor (FF) of 79% are shown by PM6:L8-BO OSCs when using ALD-SnO2 as ETL. These devices outperform solar cells with SnO2 nanoparticles casted from solution (PCE 16.03%, FF 74%) and also those utilizing the more common sol-gel ZnO (PCE 16.84%, FF 77%). The outstanding results are attributed to a reduced charge carrier recombination at the interface between the ALD-SnO2 film and the active layer. Furthermore, a higher stability under illumination is demonstrated for the devices with ALD-SnO2 in comparison with those utilizing ZnO.

Atomic-Level Tailoring of the Electronic Metal-Support Interaction Between Pt-Co3O4 Interfaces for High Hydrogen Evolution Performance

Atomic-level modulation of the metal-oxide interface is considered an effective approach to optimize the electronic structure and catalytic activity of metal catalysts but remains highly challenging. Here, we employ the atomic layer deposition (ALD) technique together with a heteroatom doping strategy to effectively tailor the electronic metal-support interaction (EMSI) at the metal-oxide interface on the atomic level, thereby achieving high hydrogen evolution performance and Pt utilization. Theoretical calculations reveal that the doping of N atoms in Co3O4 significantly adjusts the EMSI between Pt-Co3O4 interfaces and, consequently, alters the d-band center of Pt and optimizes the adsorption/desorption of reaction intermediates. This work sheds light on the atomic-level regulation and mechanistic understanding of the EMSI in metal-oxide, while providing guidance for the development of advanced EMSI electrocatalysts for various future energy applications.

Recent Achievements for Flexible Encapsulation Films Based on Atomic/Molecular Layer Deposition

The purpose of this paper is to review the research progress in the realization of the organic-inorganic hybrid thin-film packaging of flexible organic electroluminescent devices using the PEALD (plasma-enhanced atomic layer deposition) and MLD (molecular layer deposition) techniques. Firstly, the importance and application prospect of organic electroluminescent devices in the field of flexible electronics are introduced. Subsequently, the principles, characteristics and applications of PEALD and MLD technologies in device packaging are described in detail. Then, the methods and process optimization strategies for the preparation of organic-inorganic hybrid thin-film encapsulation layers using PEALD and MLD technologies are reviewed. Further, the research results on the encapsulation effect, stability and reliability of organic-inorganic hybrid thin-film encapsulation layers in flexible organic electroluminescent devices are discussed. Finally, the current research progress is summarized, and the future research directions and development trends are prospected.

Advanced TiO2/Al2O3 Bilayer ALD Coatings for Improved Lithium-Rich Layered Oxide Electrodes

Surface modification is a highly effective strategy for addressing issues in lithium-rich layered oxide (LLO) cathodes, including phase transformation, particle cracking, oxygen gas release, and transition-metal ion dissolution. Existing single-/double-layer coating strategies face drawbacks such as poor component contact and complexity. Herein, we present the results of a low-temperature atomic layer deposition (ALD) process for creating a TiO2/Al2O3 bilayer on composite cathodes made of AS200 (Li1.08Ni0.34Co0.08Mn0.5O2). Electrochemical analysis demonstrates that TiO2/Al2O3-coated LLO electrodes exhibit improved discharge capacities and enhanced capacity retention compared with uncoated samples. The TAA-5/AS200 bilayer-coated electrode, in particular, demonstrates exceptional capacity retention (∼90.4%) and a specific discharge capacity of 146 mAh g-1 after 100 cycles at 1C within the voltage range of 2.2 to 4.6 V. The coated electrodes also show reduced voltage decay, lower surface film resistance, and improved interfacial charge transfer resistances, contributing to enhanced stability. The ALD-deposited TiO2/Al2O3 bilayer coatings exhibit promising potential for advancing the electrochemical performance of lithium-rich layered oxide cathodes in lithium-ion batteries.

Protein-activated atomic layer deposition for robust crude-oil-repellent hierarchical nano-armored membranes

Atomic layer deposition (ALD) offers unique capabilities to fabricate atomically engineered porous materials with precise pore tuning and multi-functionalization for diverse applications like advanced membrane separations towards sustainable energy-water systems. However, current ALD technique is inhibited on most non-polar polymeric membranes due to lack of accessible nucleation sites. Here, we report a facile method to efficiently promote ALD coating on hydrophobic surface of polymeric membranes via novel protein activation/sensitization. As a proof of concept, TiO2 ALD-coated membranes activated by bovine serum albumin exhibit remarkable superhydrophilicity, ultralow underwater crude oil adhesion, and robust tolerance to rigorous environments including acid, alkali, saline, and ethanol. Most importantly, excellent cyclable crude oil-in-water emulsion separation performance can be achieved. The mechanism for activation/sensitization is rooted in reactivity for a particular set of amino acids. Furthermore, the universality of protein-sensitized ALD is demonstrated using common egg white, promising numerous potential usages in biomedical engineering, environmental remediation, low-carbon manufacturing, catalysis, and beyond.

Quantitative in situ synchrotron X-ray analysis of the ALD/MLD growth of transition metal dichalcogenide TiS2 ultrathin films

We present the results of a full quantitative analysis of X-ray absorption spectroscopy (XAS) performed in situ during the growth of ultrathin titanium disulfide (TiS2) films via an innovative two-step process, i.e. atomic layer deposition/molecular layer deposition (ALD/MLD) followed by annealing. This growth strategy aims at separating the growth process from the crystallization process by first creating an amorphous Ti-thiolate that is converted later to crystalline TiS2via thermal annealing. The simultaneous analysis of Ti and S K-edge XAS spectra, exploiting the insights from density functional theory calculations, allows us to shed light on the chemical and structural mechanisms underlying the main steps of growth. The nature of the bonding at the base of the interface creation with the SiO2 substrate is disclosed in this study. Evidence of a progressive incorporation of S in the amorphous Ti-thiolate is given. Finally, it is shown that the annealing step plays a critical role since the transformation of the Ti-thiolate into nanocrystalline TiS2 and the loss of S are simultaneously induced, validating the two-step synthesis approach, which entails distinct growth and crystallization steps. These observations contribute to a deeper understanding of the bonding mechanism at the interface and provide insights for future research in this field and the generation of ultra-thin layered materials.

A Review on Engineering Design for Enhancing Interfacial Contact in Solid-State Lithium-Sulfur Batteries

The utilization of solid-state electrolytes (SSEs) presents a promising solution to the issues of safety concern and shuttle effect in Li-S batteries, which has garnered significant interest recently. However, the high interfacial impedances existing between the SSEs and the electrodes (both lithium anodes and sulfur cathodes) hinder the charge transfer and intensify the uneven deposition of lithium, which ultimately result in insufficient capacity utilization and poor cycling stability. Hence, the reduction of interfacial resistance between SSEs and electrodes is of paramount importance in the pursuit of efficacious solid-state batteries. In this review, we focus on the experimental strategies employed to enhance the interfacial contact between SSEs and electrodes, and summarize recent progresses of their applications in solid-state Li-S batteries. Moreover, the challenges and perspectives of rational interfacial design in practical solid-state Li-S batteries are outlined as well. We expect that this review will provide new insights into the further technique development and practical applications of solid-state lithium batteries.

Atomic Layer Deposition-A Versatile Toolbox for Designing/Engineering Electrodes for Advanced Supercapacitors

Atomic layer deposition (ALD) has become the most widely used thin-film deposition technique in various fields due to its unique advantages, such as self-terminating growth, precise thickness control, and excellent deposition quality. In the energy storage domain, ALD has shown great potential for supercapacitors (SCs) by enabling the construction and surface engineering of novel electrode materials. This review aims to present a comprehensive outlook on the development, achievements, and design of advanced electrodes involving the application of ALD for realizing high-performance SCs to date, as organized in several sections of this paper. Specifically, this review focuses on understanding the influence of ALD parameters on the electrochemical performance and discusses the ALD of nanostructured electrochemically active electrode materials on various templates for SCs. It examines the influence of ALD parameters on electrochemical performance and highlights ALD's role in passivating electrodes and creating 3D nanoarchitectures. The relationship between synthesis procedures and SC properties is analyzed to guide future research in preparing materials for various applications. Finally, it is concluded by suggesting the directions and scope of future research and development to further leverage the unique advantages of ALD for fabricating new materials and harness the unexplored opportunities in the fabrication of advanced-generation SCs.

Enabling Electrochemical-Mechanical Robustness of Ultra-High Ni Cathode via Self-Supported Primary-Grain-Alignment Strategy

The electrochemical-mechanical degradation of ultrahigh Ni cathode for lithium-ion batteries is a crucial aspect that limits the cycle life and safety of devices. Herein, the study reports a facile strategy involving rational design of primary grain crystallographic orientation within polycrystalline cathode, which well enhanced its electro-mechanical strength and Li+ transfer kinetics. Ex situ and in situ experiments/simulations including cross-sectional particle electron backscatter diffraction (EBSD), single-particle micro-compression, thermogravimetric analysis combined with mass spectrometry (TGA-MS), and finite element modeling reveal that, the primary-grain-alignment strategy effectively mitigates the particle pulverization, lattice oxygen release thereby enhances battery cycle life and safety. Besides the preexisting doping and coating methodologies to improve the stability of Ni-rich cathode, the primary-grain-alignment strategy, with no foreign elements or heterophase layers, is unprecedently proposed here. The results shed new light on the study of electrochemical-mechanical strain alleviation for electrode materials.

Superlattice Nanofilm on a Touchscreen for Photoexcited Bacteria and Virus Killing by Tuning Electronic Defects in the Heterointerface

Currently, the global COVID-19 pandemic has significantly increased the public attention toward the spread of pathogenic viruses and bacteria on various high-frequency touch surfaces. Developing a self-disinfecting coating on a touchscreen is an urgent and meaningful task. Superlattice materials are among the most promising photocatalysts owing to their efficient charge transfer in abundant heterointerfaces. However, excess electronic defects at the heterointerfaces result in the loss of substantial amounts of photogenerated charge carrier. In this study, a ZnOFe₂ O₃ superlattice nanofilm is designed via atomic layer deposition for photocatalytic bactericidal and virucidal touchscreen. Additionally, electronic defects in the superlattice heterointerface are engineered. Photogenerated electrons and holes will be rapidly separated and transferred into ZnO and Fe₂ O₃ across the heterointerfaces owing to the formation of ZnO, FeO, and ZnFe covalent bonds at the heterointerfaces, where ZnO and Fe₂ O₃ function as electronic donors and receptors, respectively. The high generation capacity of reactive oxygen species results in a high antibacterial and antiviral efficacy (>90%) even against drug-resistant bacteria and H1N1 viruses under simulated solar or low-power LED light irradiation. Meanwhile, this superlattice nanofilm on a touchscreen shows excellent light transmission (>90%), abrasion resistance (10⁶ times the round-trip friction), and biocompatibility.

Dynamic Electrode-Electrolyte Intermixing in Solid-State Sodium Nano-Batteries

Nanostructured solid-state batteries (SSBs) are poised to meet the demands of next-generation energy storage technologies by realizing performance competitive to their liquid-based counterparts while simultaneously offering improved safety and expanded form factors. Atomic layer deposition (ALD) is among the tools essential to fabricate nanostructured devices with challenging aspect ratios. Here, we report the fabrication and electrochemical testing of the first nanoscale sodium all-solid-state battery (SSB) using ALD to deposit both the V₂O₅ cathode and NaPON solid electrolyte followed by evaporation of a thin-film Na metal anode. NaPON exhibits remarkable stability against evaporated Na metal, showing no electrolyte breakdown or significant interphase formation in the voltage range of 0.05-6.0 V vs Na/Na⁺. Electrochemical analysis of the SSB suggests intermixing of the NaPON/V₂O₅ layers during fabrication, which we investigate in three ways: in situ spectroscopic ellipsometry, time-resolved X-ray photoelectron spectroscopy (XPS) depth profiling, and cross-sectional cryo-scanning transmission electron microscopy (cryo-STEM) coupled with electron energy loss spectroscopy (EELS). We characterize the interfacial reaction during the ALD NaPON deposition on V₂O₅ to be twofold: (1) reduction of V₂O₅ to VO₂ and (2) Na⁺ insertion into VO₂ to form Na_xVO₂. Despite the intermixing of NaPON-V₂O₅, we demonstrate that NaPON-coated V₂O₅ electrodes display enhanced electrochemical cycling stability in liquid-electrolyte coin cells through the formation of a stable electrolyte interphase. In all-SSBs, the Na metal evaporation process is found to intensify the intermixing reaction, resulting in the irreversible formation of mixed interphases between discrete battery layers. Despite this graded composition, the SSB can operate for over 100 charge-discharge cycles at room temperature and represents the first demonstration of a functional thin-film solid-state sodium-ion battery.

Atomic layer deposition assisted fabrication of large-scale metal nanogaps for surface enhanced Raman scattering

Metal nanogaps can confine electromagnetic field into extremely small volumes, exhibiting strong surface plasmon resonance effect. Therefore, metal nanogaps show great prospects in enhancing light-matter interaction. However, it is still challenging to fabricate large-scale (centimeter scale) nanogaps with precise control of gap size at nanoscale, limiting the practical applications of metal nanogaps. In this work, we proposed a facile and economic strategy to fabricate large-scale sub-10 nm Ag nanogaps by the combination of atomic layer deposition (ALD) and mechanical rolling. The plasmonic nanogaps can be formed in the compacted Ag film by the sacrificial Al₂O₃deposited via ALD. The size of nanogaps are determined by the twice thickness of Al₂O₃with nanometric control. Raman results show that SERS activity depends closely on the nanogap size, and 4 nm Ag nanogaps exhibit the best SERS activity. By combining with other porous metal substrates, various sub-10 nm metal nanogaps can be fabricated over large scale. Therefore, this strategy will have significant implications for the preparation of nanogaps and enhanced spectroscopy.

Nitrogen Plasma Enhanced Low Temperature Atomic Layer Deposition of Magnesium Phosphorus Oxynitride (MgPON) Solid-State Electrolytes

Solid-state batteries (SSBs) that use solid electrolytes instead of flammable liquid electrolytes have the potential to generate higher specific capacity and offer better safety. Magnesium (Mg) based SSBs with Mg metal anodes are considered to be one of the most promising energy storage candidates, because it gives high theoretical volumetric capacities of 3830 mAh cm^-3 . Here, we demonstrate an atomic layer deposition (ALD) process with a double nitrogen plasma process that successfully produces nitrogen-incorporated magnesium phosphorus oxynitride (MgPON) solid-state electrolyte (SSE) thin films at a low deposition temperature of 125 °C. The ALD MgPON SSEs exhibit an ionic conductivity of 0.36 and 1.2 μS cm^-1 at 450 and 500 °C, respectively. The proposed ALD strategy shows the ability of conformal deposition nitrogen-doped SSEs on pattered substrates and is attractive for using nitride ion-conducing films as protective or wetting interlayers in solid-state Mg and Li batteries.

Electrical and Structural Properties of Semi-Polar-ZnO/a-Al2O3 and Polar-ZnO/c-Al2O3 Films: A Comparative Study

In this work, the properties of ZnO films of 100 nm thickness, grown using atomic layer deposition (ALD) on a-(100) and c-(001) oriented Al₂O₃ substrate are reported. The films were grown in the same growth conditions and parameters at six different growth temperatures (T_g) ranging from 100 °C to 300 °C. All as-grown and annealed films were found to be polycrystalline, highly (001) oriented for the c-Al₂O₃ and highly (101) oriented for the a-Al₂O₃ substrate. The manifestation of semi-polar-(101) and polar (001)-oriented ZnO films on the same substrate provided the opportunity for a comparative study in terms of the influence of polarization on the electrical and structural properties of ZnO films. It was found that the concentration of hydrogen, carbon, and nitrogen impurities in polar (001)-oriented films was considerably higher than in semi-polar (101)-oriented ZnO films. The study showed that when transparent conductive oxide applications were considered, the ZnO layers could be deposited at a temperature of about 160 °C, because, at this growth temperature, the high electrical conductivity was accompanied by surface smoothness in the nanometer scale. On the contrary, semi-polar (101)-oriented films might offer a perspective for obtaining p-type ZnO films, because the concentration of carbon and hydrogen impurities is considerably lower than in polar films.

Poly(ether imide) Porous Membrane Developed by a Scalable Method for High-Performance Lithium-Sulfur Batteries: Combined Theoretical and Experimental Study

Lithium-sulfur (Li-S) batteries are one of the emerging candidates for energy storage systems due to their high theoretical energy density and the abundance/nontoxicity/low cost of sulfur. Compared with conventional lithium-ion batteries, multiple new challenges have been brought into this advanced battery system, such as polysulfide shuttling in conventional polyolefin separators and undesired lithium dendrite formation of the Li metal anode. These issues severely affect the cell performance and impede their practical applications. Herein, we develop a poly(ether imide) (PEI)-based membrane with a sponge-like pore morphology as the separator for the Li-S battery by a simplified phase inversion method. This new separator can not only alleviate the new challenges in Li-S batteries but also exhibit excellent ion conductivity, better thermal stability, and higher mechanical strength compared to those of the conventional polypropylene (PP) separator. A combined experimental and theoretical study indicates that the sponge-like morphology of the PEI membrane and its good wettability toward the electrolyte can facilitate uniform ion transportation and suppress dendrite growth. Meanwhile, the PEI molecules exhibit a strong interaction with polysulfides and avoid their shuttling effectively. As a result, the PEI-based Li-S battery shows a much better performance from various aspects (capacity, rate capability, and cycling stability) than that of the PP-based Li-S battery, especially at high charge/discharge current densities and high sulfur loadings. Since the developed PEI membrane can be easily scaled up, this work may accelerate the practical applications of Li-S batteries from the point of separators.

Atomic and Molecular Layer Deposition as Surface Engineering Techniques for Emerging Alkali Metal Rechargeable Batteries

Alkali metals (lithium, sodium, and potassium) are promising as anodes in emerging rechargeable batteries, ascribed to their high capacity or abundance. Two commonly experienced issues, however, have hindered them from commercialization: the dendritic growth of alkali metals during plating and the formation of solid electrolyte interphase due to contact with liquid electrolytes. Many technical strategies have been developed for addressing these two issues in the past decades. Among them, atomic and molecular layer deposition (ALD and MLD) have been drawing more and more efforts, owing to a series of their unique capabilities. ALD and MLD enable a variety of inorganic, organic, and even inorganic-organic hybrid materials, featuring accurate nanoscale controllability, low process temperature, and extremely uniform and conformal coverage. Consequently, ALD and MLD have paved a novel route for tackling the issues of alkali metal anodes. In this review, we have made a thorough survey on surface coatings via ALD and MLD, and comparatively analyzed their effects on improving the safety and stability of alkali metal anodes. We expect that this article will help boost more efforts in exploring advanced surface coatings via ALD and MLD to successfully mitigate the issues of alkali metal anodes.

Critical Review on cathode-electrolyte Interphase Toward High-Voltage Cathodes for Li-Ion Batteries

The thermal stability window of current commercial carbonate-based electrolytes is no longer sufficient to meet the ever-increasing cathode working voltage requirements of high energy density lithium-ion batteries. It is crucial to construct a robust cathode-electrolyte interphase (CEI) for high-voltage cathode electrodes to separate the electrolytes from the active cathode materials and thereby suppress the side reactions. Herein, this review presents a brief historic evolution of the mechanism of CEI formation and compositions, the state-of-art characterizations and modeling associated with CEI, and how to construct robust CEI from a practical electrolyte design perspective. The focus on electrolyte design is categorized into three parts: CEI-forming additives, anti-oxidation solvents, and lithium salts. Moreover, practical considerations for electrolyte design applications are proposed. This review will shed light on the future electrolyte design which enables aggressive high-voltage cathodes.

Highly Thermoelectric ZnO@MXene (Ti3C2Tx) Composite Films Grown by Atomic Layer Deposition

Due to its unique high conductivity and flexibility, the two-dimensional MXene material (Ti₃C₂T_x) is expected to possess great potential in the thermoelectric field. However, the low thermoelectric performance from high thermal conductivity and a low Seebeck coefficient has limited its practical application. In this report, we demonstrate the uniform growth of ZnO layers on the laminar Ti₃C₂T_x membrane by atomic layer deposition (ALD). Benefiting from the low-temperature deposition characteristics of the ALD technique, the ZnO@Ti₃C₂T_x composite films maintain the basic apparent morphology of the original films after the deposition. We reveal that the Schottky barrier formed between ZnO and Ti₃C₂T_x exhibits an energy-filtering effect, significantly enhancing the Seebeck coefficient to result in more than a double increase in the power factor. Meanwhile, the strong phonon-interface scattering between ZnO and Ti₃C₂T_x is found to reduce the thermal conductivity of the composite films by a factor of four as compared to pure Ti₃C₂T_x ones, further improving the overall thermoelectric properties of the ZnO@Ti₃C₂T_x composite films. Our investigation provides an ALD-based strategy for growing wide band gap layers on the narrow band gap films to improve the thermoelectric performance of various MXene materials.

Ionic Conductive and Highly-Stable Interface for Alkali Metal Anodes

Alkali metals are regarded as the most promising candidates for advanced anode for the next-generation batteries due to their high specific capacity, low electrochemical potential, and lightweight. However, critical problems of the alkali metal anodes, especially dendrite formation and interface stabilization, remain challenging to overcome. The solid electrolyte interphase (SEI) is a key factor affecting Li and Na deposition behavior and electrochemical performances. Herein, a facile and universal approach is successfully developed to fabricate ionic conductive interfaces for Li and Na metal anodes by modified atomic layer deposition (ALD). In this process, the Li metal (or Na metal) plays the role of Li (or Na) source without any additional Li (or Na) precursor during ALD. Moreover, the key questions about the influence of ALD deposition temperature on the compositions and structure of the coatings are addressed. The optimized ionic conductive coatings have significantly improved the electrochemical performances. In addition, the electrochemical phase-field model is performed to prove that the ionic conductive coating is very effective in promoting uniform electrodeposition. This approach is universal and can be potentially applied to other different metal anodes. At the same time, it can be extended to other types of coatings or other deposition techniques.

Ni-soc-MOF derived carbon hollow sphere encapsulated Ni3Se4 nanocrystals for high-rate supercapacitors

Carbon hollow sphere encapsulated Ni₃Se₄ (Ni₃Se₄@CHS) nanocrystals are prepared using the Ni-soc-MOF by pyrolysis and further selenization. Ni₃Se₄@CHS exhibits a capacitance of 1720 F g^-1 at 1 A g^-1 and a capacitance retention of 97% after 6000 cycles at 5 A g^-1. Moreover, the asymmetric supercapacitor of Ni₃Se₄@CHS//AC displays a wide potential window of 1.6 V, an energy density of 45.2 W h kg^-1 at a power density of 800 W kg^-1, and excellent cycling stability (89% capacitance retention) after 5000 cycles. Overall, this work establishes a significant step to synthesize a new carbon-based material with appreciable capacitance and long cycling durability for potential applications in energy storage and beyond.

Defective Fe3 O4- x Few-Atom Clusters Anchored on Nitrogen-Doped Carbon as Efficient Oxygen Reduction Electrocatalysts for High-Performance Zinc-Air Batteries

It remains a challenge to develop cost-effective, high-performance oxygen electrocatalysts for rechargeable metal-air batteries. Herein, zinc-mediated zeolitic imidazolate frameworks are exploited as the template and nitrogen and carbon sources, onto which is deposited a Fe₃ O₄ layer by plasma-enhanced atomic layer deposition. Controlled pyrolysis at 1000 °C leads to the formation of high density of Fe₃ O_{4- x} few-atom clusters with abundant oxygen vacancies deposited on an N-doped graphitic carbon framework. The resulting nanocomposite (Fe₃ O_{4- x} /NC-1000) exhibits a markedly enhanced electrocatalytic performance toward oxygen reduction reaction in alkaline media, with a remarkable half-wave potential of +0.930 V versus reversible hydrogen electrode, long-term stability, and strong tolerance against methanol poisoning, in comparison to samples prepared at other temperatures and even commercial Pt/C. Notably, with Fe₃ O_{4- x} /NC-1000 as the cathode catalyst, a zinc-air battery delivers a high power density of 158 mW cm^-2 and excellent durability at 5 mA cm^-2 with stable 2000 charge-discharge cycles over 600 h. This is ascribed to the ready accessibility of the Fe₃ O_{4- x} catalytic active sites, and enhanced electrical conductivity, oxygen adsorption, and electron-transfer kinetics by surface oxygen vacancies. Further contributions may arise from the highly conductive and stable N-doped graphitic carbon frameworks.

Atmospheric atomic layer deposition of SnO2 thin films with tin(II) acetylacetonate and water

Due to its unique optical, electrical, and chemical properties, tin dioxide (SnO₂) thin films attract enormous attention as a potential material for gas sensors, catalysis, low-emissivity coatings for smart windows, transparent electrodes for low-cost solar cells, etc. However, the low-cost and high-throughput fabrication of SnO₂ thin films without producing corrosive or toxic by-products remains challenging. One appealing deposition technique, particularly well-adapted to films presenting nanometric thickness is atomic layer deposition (ALD). In this work, several metalorganic tin-based complexes, namely, tin(IV) tert-butoxide, bis[bis(trimethylsilyl)amino] tin(II), dibutyltin diacetate, tin(II) acetylacetonate, tetrakis(dimethylamino) tin(IV), and dibutyltin bis(acetylacetonate), were explored thanks to DFT calculations. Our theoretical calculations suggest that the three last precursors are very appealing for ALD of SnO₂ thin films. The potential use of these precursors for atmospheric-pressure spatial atomic layer deposition (AP-SALD) is also discussed. For the first time, we experimentally demonstrate the AP-SALD growth of SnO₂ thin films using tin(II) acetylacetonate (Sn(acac)₂) and water. We observe that Sn(acac)₂ exhibits efficient ALD activity with a relatively large ALD temperature window (140-200 °C), resulting in a growth rate of 0.85 ± 0.03 Å per cyc. XPS analyses show a single Sn 3d_5/2 characteristic peak for Sn⁴⁺ at 486.8 ± 0.3 eV, indicating that a pure SnO₂ phase is obtained within the ALD temperature window. The as-deposited SnO₂ thin films are in all cases amorphous, and film conductivity increases with the deposition temperature. Hall effect measurements confirm the n-type nature of SnO₂ with a free electron density of about 8 × 10¹⁹ cm^-3, electron mobility up to 11.2 cm² V^-1 s^-1, and resistivity of 7 × 10^-3 Ω cm for samples deposited at 270 °C.

Titanium Carboxylate Molecular Layer Deposited Hybrid Films as Protective Coatings for Lithium-Ion Batteries

The lifetime of lithium-ion batteries can be extended by applying protective coatings to the cathode's surface. Many studies explore atomic layer deposition (ALD) for this purpose. However, the complementary molecular layer deposition (MLD) technique might offer the benefit of depositing hybrid coatings that are flexible and can accommodate potential volume changes of the electrode during charging and discharging of the battery. This study reports the deposition of titanium carboxylate thin films via MLD. The structure and stability of the hybrid films are studied by using Fourier transform IR spectroscopy. The electrochemical properties of two titanium carboxylate films and a "titanicone" MLD film, deposited by using TDMAT and glycerol, are evaluated on top of a TiO₂, TiN, and LiMn₂O₄ electrode. The coatings are found to present good lithium-ion kinetics and to reduce electrolyte decomposition. Overall, the titanium carboxylate films deposited in this work seem promising as protective and elastic coatings for future high-energy lithium-ion battery cathodes.

Dynamic Nuclear Polarization in battery materials

The increasing need for portable and large-scale energy storage systems requires development of new, long lasting and highly efficient battery systems. Solid state NMR spectroscopy has emerged as an excellent method for characterizing battery materials. Yet, it is limited when it comes to probing thin interfacial layers which play a central role in the performance and lifetime of battery cells. Here we review how Dynamic Nuclear Polarization (DNP) can lift the sensitivity limitation and enable detection of the electrode-electrolyte interface, as well as the bulk of some electrode and electrolyte systems. We describe the current challenges from the point of view of materials development; considering how the unique electronic, magnetic and chemical properties differentiate battery materials from other applications of DNP in materials science. We review the current applications of exogenous and endogenous DNP from radicals, conduction electrons and paramagnetic metal ions. Finally, we provide our perspective on the opportunities and directions where battery materials can benefit from current DNP methodologies as well as project on future developments that will enable NMR investigation of battery materials with sensitivity and selectivity under ambient conditions.

Reduction of Surface Residual Lithium Compounds for Single-Crystal LiNi0.6Mn0.2Co0.2O2 via Al2O3 Atomic Layer Deposition and Post-Annealing

Surface residual lithium compounds of Ni-rich cathodes are tremendous obstacles to electrochemical performance due to blocking ion/electron transfer and arousing surface instability. Herein, ultrathin and uniform Al2O3 coating via atomic layer deposition (ALD) coupled with the post-annealing process is reported to reduce residual lithium compounds on single-crystal LiNi0.6Mn0.2Co0.2O2 (NCM622). Surface composition characterizations indicate that LiOH is obviously reduced after Al2O3 growth on NCM622. Subsequent post-annealing treatment causes the consumption of Li2CO3 along with the diffusion of Al atoms into the surface layer of NCM622. The NCM622 modified by Al2O3 coating and post-annealing exhibits excellent cycling stability, the capacity retention of which reaches 92.2% after 300 cycles at 1 C, much higher than that of pristine NCM622 (34.8%). Reduced residual lithium compounds on NCM622 can greatly decrease the formation of LiF and the degree of Li+/Ni2+ cation mixing after discharge–charge cycling, which is the key to the improvement of cycling stability.

Atomic/molecular layer deposition of Ni-terephthalate thin films

Atomic/molecular layer deposition (ALD/MLD) is currently strongly emerging as an intriguing route for novel metal-organic thin-film materials. This approach already covers a variety of metal and organic components, and potential applications related to e.g. sustainable energy technologies. Among the 3d metal components, nickel has remained unexplored so far. Here we report a robust and efficient ALD/MLD process for the growth of high-quality nickel terephthalate thin films. The films are deposited from Ni(thd)₂ (thd: 2,2,6,6-tetramethyl-3,5-heptanedionate) and terephthalic acid (1,4-benzenedicarboxylic acid) precursors in the temperature range of 180-280 °C, with appreciably high growth rates up to 2.3 Å per cycle at 200 °C. The films are amorphous but the local structure and chemical state of the films are addressed based on XRR, FTIR and RIXS techniques.

Organic/Inorganic Hybrid Fibers: Controllable Architectures for Electrochemical Energy Applications

Organic/inorganic hybrid fibers (OIHFs) are intriguing materials, possessing an intrinsic high specific surface area and flexibility coupled to unique anisotropic properties, diverse chemical compositions, and controllable hybrid architectures. During the last decade, advanced OIHFs with exceptional properties for electrochemical energy applications, including possessing interconnected networks, abundant active sites, and short ion diffusion length have emerged. Here, a comprehensive overview of the controllable architectures and electrochemical energy applications of OIHFs is presented. After a brief introduction, the controllable construction of OIHFs is described in detail through precise tailoring of the overall, interior, and interface structures. Additionally, several important electrochemical energy applications including rechargeable batteries (lithium-ion batteries, sodium-ion batteries, and lithium-sulfur batteries), supercapacitors (sandwich-shaped supercapacitors and fiber-shaped supercapacitors), and electrocatalysts (oxygen reduction reaction, oxygen evolution reaction, and hydrogen evolution reaction) are presented. The current state of the field and challenges are discussed, and a vision of the future directions to exploit OIHFs for electrochemical energy devices is provided.

2D MOF Periodontitis Photodynamic Ion Therapy

Traditional surgical intervention and antibiotic treatment are poor and even invalid for chronic diseases including periodontitis induced by diverse oral pathogens, which often causes progressive destruction of tissues, even tooth loss, and systemic diseases. Herein, an ointment comprising atomic-layer Fe₂O₃-modified two-dimensional porphyrinic metal-organic framework (2D MOF) nanosheets is designed by incorporating a polyethylene glycol matrix. After the atomic layer deposition surface engineering, the enhanced photocatalytic activity of the 2D MOF heterointerface results from lower adsorption energy and more charge transfer amounts due to the synergistic effect of metal-linker bridging units, abundant active sites, and an excellent light-harvesting network. This biocompatible and biodegradable 2D MOF-based heterostructure exhibits broad-spectrum antimicrobial activity (99.87 ± 0.09%, 99.57 ± 0.21%, and 99.03 ± 0.24%) against diverse oral pathogens (Porphyromonas gingivalis, Fusobacterium nucleatum, and Staphylococcus aureus) by the synergistic effect of reactive oxygen species and released ions. This photodynamic ion therapy exhibits a superior therapeutic effect to the reported clinical periodontitis treatment owing to rapid antibacterial activity, alleviative inflammation, and improved angiogenesis.

Rational construction of porous N-doped Fe2O3 films on porous graphene foams by molecular layer deposition for tunable microwave absorption

Graphene-based materials with porous microstructure have attracted immense attentions due to their wide application in microwave absorption. However, constructing magnetic film with both porous microstructure and uniform pore size by using traditional methods still remains a challenge. To overcome this problem, we reported a facile strategy of molecular layer deposition (MLD) for successfully fabrication of the hybrid-architecture of porous graphene foams and nitrogen-doped porous Fe₂O₃ films. The surfaces of porous graphene foams are uniformly covered by porous Fe₂O₃ films without aggregation and the pore structures are widely distributed. The porous graphene-based composites exhibit remarkably enhanced microwave absorption performance compared to the pristine graphene foams. The minimum reflection loss value is increased by approximately 8 times, reaching -64.36 dB with a thickness of only 2.18 mm. More importantly, the absorption property can be precisely modulated by tuning the MLD cycle numbers and effective absorption bandwidth covers 3.04-18.0 GHz by adjusting the thickness from 1.0 to 5.0 mm. This work provides new insights for exploring novel and high-performance graphene-based microwave absorbents and offers a new idea to rationally design three-dimensional composites with porous magnetic films.

Enhanced Electrochemical Performance of Supercapacitors via Atomic Layer Deposition of ZnO on the Activated Carbon Electrode Material

Fabricating electrical double-layer capacitors (EDLCs) with high energy density for various applications has been of great interest in recent years. However, activated carbon (AC) electrodes are restricted to a lower operating voltage because they suffer from instability above a threshold potential window. Thus, they are limited in their energy storage. The deposition of inorganic compounds' atomic layer deposition (ALD) aiming to enhance cycling performance of supercapacitors and battery electrodes can be applied to the AC electrode materials. Here, we report on the investigation of zinc oxide (ZnO) coating strategy in terms of different pulse times of precursors, ALD cycles, and deposition temperatures to ensure high electrical conductivity and capacitance retention without blocking the micropores of the AC electrode. Crystalline ZnO phase with its optimal forming condition is obtained preferably using a longer precursor pulse time. Supercapacitors comprising AC electrodes coated with 20 cycles of ALD ZnO at 70 °C and operated in TEABF₄/acetonitrile organic electrolyte show a specific capacitance of 23.13 F g^-1 at 5 mA cm^-2 and enhanced capacitance retention at 3.2 V, which well exceeds the normal working voltage of a commercial EDLC product (2.7 V). This work delivers an additional feasible approach of using ZnO ALD modification of AC materials, enhancing and promoting stable EDLC cells under high working voltages.