A minireview on doped carbon dots for photocatalytic and electrocatalytic applications

Colloidal Synthesis of Carbon Dot-ZnSe Nanoplatelet Van der Waals Heterostructures for Boosting Photocatalytic Generation of Methanol-Storable Hydrogen

Methanol is not only a promising liquid hydrogen carrier but also an important feedstock chemical for chemical synthesis. Catalyst design is vital for enabling the reactions to occur under ambient conditions. This study reports a new class of van der Waals heterojunction photocatalyst, which is synthesized by hot-injection method, whereby carbon dots (CDs) are grown in situ on ZnSe nanoplatelets (NPLs), i.e., metal chalcogenide quantum wells. The resultant organic-inorganic hybrid nanoparticles, CD-NPLs, are able to perform methanol dehydrogenation through CH splitting. The heterostructure has enabled light-induced charge transfer from the CDs into the NPLs occurring on a sub-nanosecond timescale, with charges remaining separated across the CD-NPLs heterostructure for longer than 500 ns. This resulted in significantly heightened H2 production rate of 107 µmole·g-1·h-1 and enhanced photocurrent density up to 34 µA cm-2 at 1 V bias potential. EPR and NMR analyses confirmed the occurrence of α-CH splitting and CC coupling. The novel CD-based organic-inorganic semiconductor heterojunction is poised to enable the discovery of a host of new nano-hybrid photocatalysts with full tunability in the band structure, charge transfer, and divergent surface chemistry for guiding photoredox pathways and accelerating reaction rates.

Light-Induced Self-Assembled Polydiacetylene/Carbon Dot Functional "Honeycomb"

The design of functional supramolecular assemblies from individual molecular building blocks is a fundamental challenge in chemistry and material science. We report on the fabrication of "honeycomb" films by light-induced coassembly of diacetylene derivatives and carbon dots. Specifically, modulating noncovalent interactions between the carbon dots, macrocyclic diacetylene, and anthraquinone diacetylene facilitates formation of thin films exhibiting a long-range, uniform pore structure. We show that light irradiation at distinct wavelengths plays a key role in the assembly process and generation of unique macro-porous morphology, by both initiating interactions between the carbon dots and the anthraquinone moieties and giving rise to the topotactic polymerization of the polydiacetylene network. We further demonstrate utilization of the macro-porous film as a photocatalytic platform for water pollutant degradation and as potential supercapacitor electrodes, both applications taking advantage of the high surface area, hydrophobicity, and pore structure of the film.

Preparation and Application of Carbon Dots Nanozymes

Carbon dot (CD) nanozymes have enzyme-like activity. Compared with natural enzymes, CD nanozymes offer several advantages, including simple preparation, easy preservation, good stability and recycling, which has made them a popular research topic in various fields. In recent years, researchers have prepared a variety of CD nanozymes for biosensing detection, medicine and tumor therapy, and many of them are based on oxidative stress regulation and reactive oxygen species clearance. Particularly to expand their potential applications, elemental doping has been utilized to enhance the catalytic capabilities and other properties of CD nanozymes. This review discusses the prevalent techniques utilized in the synthesis of CD nanozymes and presents the diverse applications of CD nanozymes based on their doping characteristics. Finally, the challenges encountered in the current utilization of CD nanozymes are presented. The latest research progress of synthesis, application and the challenges outlined in the review can help and encourage the researchers for the future research on preparation, application and other related researches of CD nanozymes.

Neem biomass derived carbon quantum dots synthesized via one step ultrasonification method for ecofriendly methylene blue dye removal

This article presents a one-step ultrasonication technique for generating biomass carbon dots (BCDs) from neem bark (Azadirachta indica) powder. The BCDs were characterized using modern techniques such as UV-Vis, FTIR, Raman, XRD, HRTEM, FESEM, EDAX, and Zeta potential analyses. Unlike traditional nanocomposite bed systems, this study utilized BCDs as a liquid-phase adsorbent for the regenerative adsorption of the environmentally harmful dye, methylene blue (MB), through an in-situ precipitation reaction. This involved the formation of BCDs-MB adduct via an electrostatic mechanism. The adsorption capacity and percentage of removal were remarkable at 605 mg g-1 and 64.7% respectively, exceeding various solid-based adsorption methods in the literature. The Langmuir isotherm and pseudo-second-order kinetics model provided an excellent fit for this system. The calculated thermodynamic parameter, Gibbs free energy change (ΔG) was negative, indicating a spontaneous, exothermic, and physisorption-based mechanism. The regenerative capacity of our system was further demonstrated by successfully extracting and recovering the MB dye (64%) using ethyl alcohol as the solvent. This method provides an efficient means of recovering valuable cationic organic dye compounds from contaminated environments.

Light-Mediated Polymerization Catalyzed by Carbon Nanomaterials

Carbon nanomaterials, specifically carbon dots and carbon nitrides, play a crucial role as heterogeneous photoinitiators in both radical and cationic polymerization processes. These recently introduced materials offer promising solutions to the limitations of current homogeneous systems, presenting a novel approach to photopolymerization. This review highlights the preparation and photocatalytic performance of these nanomaterials, emphasizing their application in various polymerization techniques, including photoinduced i) free radical, ii) RAFT, iii) ATRP, and iv) cationic photopolymerization. Additionally, it discusses their potential in addressing contemporary challenges and explores prospects in this field. Moreover, carbon nitrides, in particular, exhibit exceptional oxygen tolerance, underscoring their significance in radical polymerization processes and allowing their applications such as 3D printing, surface modification of coatings, and hydrogel engineering.

Excellent Charge Separation of NCQDs/ZnS Nanocomposites for the Promotion of Photocatalytic H2 Evolution

Carbon Quantum dots (CQDs) are widely studied because of their good optical and electronic characteristics and because they can easily generate photocarriers. Nitrogen-doped CQDs (NCQDs) may exhibit improved hydrophilic, optical, and electron-transfer properties, which are conducive to photocatalytic hydrogen evolution. In this paper, NCQD-modified ZnS catalysts were successfully prepared. Under the irradiation of the full spectrum, the H2 evolution rate of the optimal catalyst 0.25 wt % NCQDs/ZnS achieves 5.70 mmol g-1 h-1, which is 11.88, 43.84, and 5.14 times the values of ZnS (0.48 mmol g-1 h-1), NCQDs (0.13 mmol g-1 h-1), and CQDs/ZnS (1.11 mmol g-1 h-1), respectively. Furthermore, it shows good stability, indicating that the modification of NCQDs prevents the photocorrosion and oxidation of ZnS. The enhanced performance is due to NCQD loading, which promotes the separation of photogenerated carriers, optimizes the structures, and increases the specific surface area. This work highlights the fact that NCQD-modified ZnS may afford a new strategy to synthesize ZnS-based photocatalysts with enhanced H2 production performance.

Phenanthroline Derived N-Doped Carbon Dots as Robust Metal-Free Photocatalysts for PET-RAFT Polymerization and Polymerization-Induced Self-Assembly

Metal-free organic photocatalysts for photo-mediated reversible deactivation radical polymerization (photo-RDRP) are witnessed to make increasing advancement in the precise synthesis of polymers. However, challenges still exist in the development of high-efficiency and environmentally sustainable carbon dots (CDs)-based organocatalysts. Herein, N-doped CDs derived from phenanthroline derivative (Aphen) are prepared as metal-free photocatalysts for photoinduced electron transfer reversible addition-fragmentation chain transfer (PET-RAFT) polymerization. The introduction of phenanthroline structure enhances the excited state lifetime of CDs and expands the conjugated length of their internal structure to enable the light-absorption to reach green light region, thereby enhancing photocatalytic activity. The as-designed CDs exhibit unprecedented photocatalytic capacity in photopolymerization even in large-volume reaction (100 mL) with high monomer conversion and narrow polymer dispersity (Mw/Mn < 1.20) under green light. The photocatalytic system is compatible with PET-RAFT polymerization of numerous monomers and the production of high molecular weight polyacrylate (Mn >250 000) with exquisite spatiotemporal control. Above results confirm the potential of CDs as photocatalyst, which has not been achieved with other CDs catalysts used in photo-RDRP. In addition, the construction of fluorescent polymer nanoparticles using CDs as both photocatalyst and phosphor through photoinitiated polymerization-induced self-assembly (Photo-PISA) technology is successfully demonstrated for the first time.

A sensitive sensor based on carbon dots for the determination of Fe3+ and ascorbic acid in foods

To develop a feasible, sensitive, and essential sensor is important for the identification of Fe3+ ions and ascorbic acid (AA). Herein, highly fluorescent heteroatom co-doped carbon dots (N,S-CDs) with a quantum yield (QY) of 24.6% were synthesized, using hydrothermal treatment of L-cysteine (Cys) and 1-amino-2-naphthol-4-sulfonic acid (ANSA). The fluorescence emission of the as-prepared N,S-CDs was quenched strongly by Fe3+ ions, and this was further recovered by the reduction effect of AA on Fe3+. Based on this, continuous fluorescence sensing of Fe3+ and AA with an "on-off-on" style was developed. The detection of Fe3+ and AA were in relatively wider linear ranges of 5.00-105 μmol L-1 and 4.97-54.8 μmol L-1, with a detection limit of 0.10 μmol L-1 and 2.4 nmol L-1 (S/N = 3), respectively. Then, the N,S-CDs were successfully used to measure Fe3+ ions and AA in some daily food samples, and this method exhibited some advantages over most other reported techniques in the term of response speed, quantum yield, and detection limit.

Carbon dots as potential candidate for photocatalytic treatment of dye wastewater

Water is the utmost important element for the existence of life. In recent decades, water resources have become highly contaminated by a variety of pollutants, especially toxic dyes that are harmful to both living beings and environment. Hence, there is an urgent need to develop more effective methods than traditional wastewater treatment approaches for treatment of hazardous dyes. Herein, we have addressed the various aspects related to the effective and economically feasible method for photocatalytic degradation of these dyes employing carbon dots. The photocatalysts based on carbon dots including those mediated from biomass have many superiorities over conventional methods such as utilization of economically affordable, non-toxic, rapid reactions, and simple post-processing steps. The current study will also facilitate better insight into the understanding of photocatalytic treatment of dye-polluted wastewater for future wastewater treatment studies. Additionally, the possible mechanistic pathways of photocatalytic dye decontamination, several challenges, and future perspectives have also been summarized.

Gram-Scale Mechanochemical Synthesis of Atom-Layer MoS2 Semiconductor Electrocatalyst via Functionalized Graphene Quantum Dots for Efficient Hydrogen Evolution

The development of advanced and efficient synthetic methods is pivotal for the widespread application of 2D materials. In this study, a facile and scalable solvent-free mechanochemical approach is approached, employing graphene quantum dots (GQDs) as exfoliation agents, for the synthesis and functionalization of nearly atom-layered MoS2 nanosheets (ALMS). The resulting ALMS exhibits an ultrathin average thickness of 4 nm and demonstrates high solvent stability. The impressive yield of ALMS reached 63%, indicating its potential for scalable production of stable nanosheets. Remarkably, the ALMS catalyst exhibits excellent HER performance. Moreover, the ALMS catalyst showcases exceptional long-term durability, maintaining stable performance for nearly 200 h, underscoring its potential as a highly efficient and durable electrocatalyst. Significantly, the catalytic properties of ALMS are significantly influenced by ball milling production conditions. The GQD-assisted large-scale machinery synthesis pathway provides a promising avenue for the development of efficient and high-performance ultrathin 2D materials.

An overview on animal/human biomass-derived carbon dots for optical sensing and bioimaging applications

Over the past decade, carbon dots (CDs) have emerged as some of the extremely popular carbon nanostructures for diverse applications. The advantages of sustainable CDs, characterized by their exceptional photoluminescence (PL), high water solubility/dispersibility, non-toxicity, and biocompatibility, substantiate their potential for a wide range of applications in sensing and biology. Moreover, nature offers plant- and animal-derived precursors for the sustainable synthesis of CDs and their doped variants. These sources are not only readily accessible, inexpensive, and renewable but are also environmentally benign green biomass. This review article presents in detail the production of sustainable CDs from various animal and human biomass through bottom-up synthetic methods, including hydrothermal, microwave, microwave-hydrothermal, and pyrolysis methods. The resulting CDs exhibit a uniform size distribution, possibility of heteroatom doping, surface passivation, and remarkable excitation wavelength-dependent/independent emission and up-conversion PL characteristics. Consequently, these CDs have been successfully utilized in multiple applications, such as bioimaging and the detection of various analytes, including heavy metal ions. Finally, a comprehensive assessment is presented, highlighting the prospects and challenges associated with animal/human biomass-derived CDs for multifaceted applications.

Convergence of Time-Derivative Nonadiabatic Couplings in Plane-Wave DFT Calculations

Accurate prediction of charge carrier relaxation rates is essential to design molecules and materials with the desired photochemical properties for applications like photocatalysis and solar energy conversion. Nonadiabatic molecular dynamics allows one to simulate the relaxation process of excited charge carriers. Plane-wave density functional theory (DFT) calculations make the time-derivative nonadiabatic couplings (TNACs) simple to compute because the basis is independent of the atomic positions. However, the effect of the kinetic energy cutoff for the plane-wave basis on the accuracy of the dynamics has not been studied. Here, we examine the effect of the kinetic energy cutoff on the TNACs and decay time scales for the prototypical model system of tetracene. These calculations show that the choice of kinetic energy cutoff can change the relaxation time by up to 30%. The relaxation times of states that have small TNACs to other states or are far from degenerate are more sensitive to the kinetic energy cutoff than those of states with large TNACs or near degeneracies. A kinetic energy cutoff of 60 Ry is sufficient for all states to reach semiquantitative agreement (absolute error <10%) with the decay times of our 110 Ry reference data, and a cutoff of 80 Ry is required for all states to reach quantitative agreement (absolute error <2%).

Comprehensive advances in the synthesis, fluorescence mechanism and multifunctional applications of red-emitting carbon nanomaterials

Red emitting fluorescent carbon nanomaterials have drawn significant scientific interest in recent years due to their high quantum yield, water-dispersibility, photostability, biocompatibility, ease of surface functionalization, low cost and eco-friendliness. The red emissive characteristics of fluorescent carbon nanomaterials generally depend on the carbon source, reaction time, synthetic approach/methodology, surface functional groups, average size, and other reaction environments, which directly or indirectly help to achieve red emission. The importance of several factors to achieve red fluorescent carbon nanomaterials is highlighted in this review. Numerous plausible theories have been explained in detail to understand the origin of red fluorescence and tunable emission in these carbon-based nanostructures. The above advantages and fluorescence in the red region make them a potential candidate for multifunctional applications in various current fields. Therefore, this review focused on the recent advances in the synthesis approach, mechanism of fluorescence, and electronic and optical properties of red-emitting fluorescent carbon nanomaterials. This review also explains the several innovative applications of red-emitting fluorescent carbon nanomaterials such as biomedicine, light-emitting devices, sensing, photocatalysis, energy, anticounterfeiting, fluorescent silk, artificial photosynthesis, etc. It is hoped that by choosing appropriate methods, the present review can inspire and guide future research on the design of red emissive fluorescent carbon nanomaterials for potential advancements in multifunctional applications.

Design of a Synthetic Strategy to Achieve Enhanced Fluorescent Carbon Dots with Sulfur and Nitrogen Codoping and Its Multifunctional Applications

Here, a rational strategy to achieve multifunctional N, S codoped carbon dots (N, S-CDs) is reported, aiming to improve the photoluminescence quantum yields (PLQYs) of the CDs. The synthesized N, S-CDs have excellent stability and emission properties independent of excitation wavelength. Through the introduction of S element doping, the fluorescence emission of CDs is red-shifted from 430 to 545 nm, and the corresponding PLQYs can be greatly enhanced from 11.2% to 65.1%. It is found that the doping of S elements causes an increase in the size of CDs and an elevated graphite N content, which may be the key factors to cause the redshift of fluorescence emission. Furthermore, the introduction of S element also serves to suppress the nonradiative transitions, which may be responsible for the elevated PLQYs. Besides, the synthesized N, S-CDs have certain solvent effect and can be applied to detect water content in organic solvents, and have strong sensitivity to alkaline environment. More importantly, the N, S-CDs can be used to achieve an "on-off-on" dual detection mode between Zr4+ and NO2 - . In addition, N, S-CDs combinedwith polyvinylpyrrolidone (PVP) can also be utilized as fluorescent inks for anti-counterfeiting applications.

Photothermal performance of a novel carbon dot and its conjugate with disulfiram for prostate cancer PC3 cell therapy

Aim: To develop and employ a copper, sulfur, nitrogen-carbon quantum dot (C,S,N-CQD) multifunctional platform for synergistic cancer therapy, combining chemotherapy and photothermal treatment with in vitro cancer cell imaging. Materials & methods: Cu,S,N-CQDs were synthesized hydrothermally, loaded with disulfiram (DSF), and characterized through UV-Vis spectrophotometry, photoluminescence, Fourier-transform infrared spectroscopy, high-resolution transmission electron microscopy, dynamic light scattering, x-ray diffraction and EDAX. Results: Cu,S,N-CQD exhibited 5.5% absolute fluorescence quantum yield, 46.0% photothermal conversion efficiency and excellent stability. The release of DSF-loaded Cu,S,N-CQD, photothermal performance, and IC50 on PC3 prostate cancer cells, were evaluated. The impact of cellular glutathione on nanocarrier performance was investigated. Conclusion: Cu,S,N-CQD as a photothermal agent and DSF carrier showed synergy (combination index: 0.71) between chemotherapy and photothermal therapy. The nanocarrier simultaneously employed for in vitro cancer cell imaging due to its unique fluorescence properties.

Luminescence of carbon quantum dots and their application in biochemistry

Similar to fullerenes, carbon nanotubes and graphene, carbon dots (CDs) are causing a lot of research work in their own right. CDs are a type of surface-passivated quantum dot that contain carbon atoms. Their distinctive characteristics, such as luminescent emission that varies with size and wavelength, resistance to photobleaching, easy biological binding, lack of toxicity, and economical production without the need for intricate synthetic processes, have led to a noteworthy surge in attention within the research community. Different techniques can be utilized to create these CDs, spanning from basic candle burning to laser ablation. This review article delves into the principles of fluorescence technology, providing insights into how different synthesis methods of quantum dots impact their luminescent properties. Additionally, it highlights the latest applications of quantum dots in catalysis and biomedical fields, with special emphasis on the current status of luminescent properties in biology and chemistry. Towards the end, the article discusses the limitations of quantum dots in current practical applications, pointing out that CDs hold promising potential for future applications.

Physiological Functions of Carbon Dots and Their Applications in Agriculture: A Review

Carbon dots are carbon-based nanoparticles, which have the characteristics of a simple preparation process, photoluminescence, biocompatibility, an adjustable surface function, water solubility, and low-level toxicity. They are widely used in biological applications, such as imaging, biosensing, photocatalysis, and molecular transfer. They have also aroused great interest among researchers in agriculture, and there has been significant progress in improving crop growth and production. This review presents the physiological functions of carbon dots for crop growth and development, photosynthesis, water and nutrient absorption, and abiotic stress resistance and their applications in improving the ecological environment and agriculture as biosensors, and future application prospects and research directions of carbon dots in agriculture.

Carbon Dots as an Electron Acceptor in the ZnIn2S4@MIL-88A Heterojunction for Enhanced Visible-Light-Driven Photocatalytic Hydrogen Evolution

In this study, visible-light-responsive carbon dots (CDs)/ZnIn2S4@MIL-88A (C/ZI@ML) photocatalysts were successfully prepared through in situ loading CDs and ZnIn2S4 nanosheets on MIL-88A(Fe) to form a ternary heterojunction. The detailed characterization indicated that the two-dimensional ZnIn2S4 nanosheets were uniformly coated on the surface of MIL-88A(Fe), and ZnIn2S4/MIL-88A(Fe) exhibited enhanced photocatalytic hydrogen production performance (1259.63 μmol h-1 g-1) compared to that of pristine MIL-88A(Fe) and ZnIn2S4 under visible light illumination. After introduction of CDs into ZnIn2S4/MIL-88A(Fe), the C/ZI@ML catalyst remarkably enhanced the photocatalytic activity and the hydrogen evolution rate of 1C/ZI@ML was up to 3609.23 μmol g-1 h-1. The photoinduced charge carriers of C/ZI@ML can be efficiently separated and migrated because of the close contacted interface, synergistic effect, and suitable band structure. In combination with photoelectrochemical experiments and electron paramagnetic resonance spectra, a possible photocatalytic mechanism over C/ZI@ML was proposed. This work demonstrated a facile preparation method for fabricating efficient visible-light-driven heterojunction photocatalysts.

Carbon Dots in Treatment of Pediatric Brain Tumors: Past, Present, and Future Directions

Pediatric brain tumors remain a significant source of morbidity and mortality. Though developments have been made in treating these malignancies, the blood-brain barrier, intra- and inter-tumoral heterogeneity, and therapeutic toxicity pose challenges to improving outcomes. Varying types of nanoparticles, including metallic, organic, and micellar molecules of varying structures and compositions, have been investigated as a potential therapy to circumvent some of these inherent challenges. Carbon dots (CDs) have recently gained popularity as a novel nanoparticle with theranostic properties. This carbon-based modality is highly modifiable, allowing for conjugation to drugs, as well as tumor-specific ligands in an effort to more effectively target cancerous cells and reduce peripheral toxicity. CDs are being studied pre-clinically. The ClinicalTrials.gov site was queried using the search terms: brain tumor and nanoparticle, liposome, micelle, dendrimer, quantum dot, or carbon dot. At the time of this review, 36 studies were found, 6 of which included pediatric patients. Two of the six studies investigated nanoparticle drug formulations, whereas the other four studies were on varying liposomal nanoparticle formulations for the treatment of pediatric brain tumors. Here, we reviewed the context of CDs within the broader realm of nanoparticles, their development, promising pre-clinical potential, and proposed future translational utility.

Doped Carbon Quantum Dots Reinforced Hydrogels for Sustained Delivery of Molecular Cargo

Hydrogels have emerged as important soft materials with numerous applications in fields including biomedicine, biomimetic smart materials, and electrochemistry. Because of their outstanding photo-physical properties and prolonged colloidal stability, the serendipitous findings of carbon quantum dots (CQDs) have introduced a new topic of investigation for materials scientists. CQDs confined polymeric hydrogel nanocomposites have emerged as novel materials with integrated properties of the individual constituents, resulting in vital uses in the realm of soft nanomaterials. Immobilizing CQDs within hydrogels has been shown to be a smart tactic for preventing the aggregation-caused quenching effect and also for manipulating the characteristics of hydrogels and introducing new properties. The combination of these two very different types of materials results in not only structural diversity but also significant improvements in many property aspects, leading to novel multifunctional materials. This review covers the synthesis of doped CQDs, different fabrication techniques for nanostructured materials made of CQDs and polymers, as well as their applications in sustained drug delivery. Finally, a brief overview of the present market and future perspectives are discussed.

Green synthesis of CQDs for determination of iron and isoniazid in pharmaceutical formulations

Camphor leaves were used as the precursor for the hydrothermal synthesis of carbon quantum dots. The preparation method is simple and rapid, and the raw material is environmentally friendly and easy to obtain. Without additional modification, the carbon quantum dots were used as fluorescent probes for the sensitive and selective detection of Fe³⁺ and isoniazid at different excitation wavelengths. For Fe³⁺, at the excitation wavelength of 320 nm, the ratio of fluorescence intensity of CQD solution after adding Fe³⁺ to CQD solution without Fe³⁺ addition, F/F₀, and Fe³⁺ concentration showed a good linear relationship in the range of 2.72 × 10^-5 to 1.00 × 10^-4 mol L^-1 (R² = 0.9912), and the limit of detection was 8.16 μmol L^-1. For isoniazid, at the excitation wavelength of 270 nm, the ratio of fluorescence intensity of CQDs solution with isoniazid to CQDs solution without isoniazid, F/F₀, and isoniazid concentration showed good linear relationships in the range of 3.81 × 10^-6 to 1.00 × 10^-5 mol L^-1 (R² = 0.9941) and 1.00 × 10^-5 to 2.10 × 10^-4 mol L^-1 (R² = 0.9910) respectively, and the limit of detection was 1.14 μmol L^-1. A fluorescence method for the determination of Fe and isoniazid content was proposed. The method has been used to detect iron in iron supplement tablets and isoniazid in isoniazid tablets with satisfactory results.

Carbon nanodots with a controlled N structure by a solvothermal method for generation of reactive oxygen species under visible light

Carbon nanodots can function as photosensitizers that have the ability to generate reactive oxygen species such as singlet oxygen, hydroxy (OH) radicals, and superoxide ions. However, most of these can only be generated upon ultraviolet light excitation. Additionally, the mechanism of reactive oxygen species generation by carbon nanodots remains unclear. The development of carbon nanodots that can photosensitize under visible light irradiation is desirable for applications such as photodynamic therapy and pollutant decomposition under visible light. Here, we report novel carbon nanodot-based photosensitizers that generate reactive oxygen species under visible light; they were synthesized using a solvothermal method with two solvents (formamide and water) and amidol as the carbon source. Carbon nanodots from the solvothermal synthesis in formamide showed blue fluorescence, while those obtained in water showed green fluorescence. The photo-excited blue-fluorescent carbon nanodots produced OH radicals, superoxide ions, and singlet oxygen, and therefore could function as both type I and type II photosensitizers. In addition, photo-excited green-fluorescent carbon nanodots generated only singlet oxygen, therefore functioning as type II photosensitizers. It is proposed that the two photosensitizers have different origins of reactive oxygen species generation: the enrichment of graphitic N for blue-fluorescent carbon nanodots and molecular fluorophores for green-fluorescent carbon nanodots.

Preparation of Carbon Dots from PET Waste by One-step Hydrothermal Method and its Application in Light Blocking Films and LEDs

An environmentally friendly PET-based Carbon Dots (PET-CDs) with excellent fluorescence properties were prepared with waste PET bottle, pyromellitic acid and ammonia water as raw materials by one-step hydrothermal method. The preparation mechanism of PET-CDs was as follows: PET first underwent ammonolysis reaction to produce terephthalic acid diamide and ethylene glycol, and then dehydrated and carbonized with pyromellitic acid to form PET-CDs. The as-prepared PET-CDs exhibit excitation-independent emission properties in the range from 340 to 440 nm, and the fluorescence quantum yield is as high as 87.36%. In terms of structure, PET-CDs is a spherical structure with an average particle size of 2.0 nm, and its surface contains carboxyl and amino groups. The PET-CDs were dispersed in a PVA matrix to obtain an light blocking films(LBFs) for 250-450 nm light with excellent properties, and its transparency for 450-700 nm light is good. In addition, PET-CDs was used in the fields of LED, and it was found that the color coordinate for the LED assembled with PET-CDs and 395 nm LED chips is (0.55, 0.44) and the correlated color temperature is 2018 K.

Nitrogen and Sulfur Co-doped Carbon Dots as a Turn-Off Fluorescence Probe for the Detection of Cerium and Iron

Carbon dots has becoming one of the most promising fluorescence sensors to determine the trace level of heavy metals in environments because of their advantages in optical properties, response time, and convenient operation procedures. Herein, a novel nitrogen and sulfur co-doped carbon dots (NS-CDs) were prepared though microwave assisted approach using DL-malic acid and allyl thiourea for the first time. Due to the existence of nitrogen and sulfur, the as-prepared NS-CDs exhibited bright blue fluorescence at 430 nm upon 330 nm excitation, with a fluorescence quantum yield of 19.8%. The sensitivity study of NS-CDs against metal ions and organic molecules has approved that the fluorescence could be further quenched by Ce⁴⁺ and Fe³⁺ ions, with the same linear detection ranges varying from 10 to 90 µM. The limits of detection (LOD) were determined as low as 0.75 µM and 0.67 µM for Ce⁴⁺ and Fe³⁺ ions, respectively. The possible quenching mechanism is explained by inner filter effect and static quenching mechanism for Ce⁴⁺ ions, while the quenching effect caused by Fe³⁺ ions is attributed to the inner filter effect, static and dynamic quenching mechanisms. Additionally, the developed sensor was used for the detection of Ce⁴⁺ and Fe³⁺ ions in tap water with satisfactory recoveries. Finally, the designed NS-CDs sensor possesses good biocompatibility against MA104 cells, suggesting the sensor can be potentially applied to detect Ce⁴⁺ and Fe³⁺ ions in environment and biological systems.

Nitrogen and boron co-doped carbon dots as a novel fluorescent probe for fluorogenic sensing of Ce4+ and ratiometric detection of Al3

Carbon dots have been widely focused on the field of metal ion detection due to their excellent optical property. Herein, novel orange fluorescent nitrogen and boron co-doped carbon dots (NB-CDs) are obtained by one-pot solvothermal using p-phenylenediamine and boric acid as raw materials. The NB-CDs exhibit excitation-independent emissions and the maximum emission wavelength is 597 nm at 420 nm excitation. The fluorescence can be quenched by Ce⁴⁺ effectively and selectively, and the detection range of Ce⁴⁺ is gained from 0.14 to 180 μM with a detection limit of as low as 0.14 μM. Furthermore, Al³⁺ can also recombine with NB-CDs surface functional groups, which shows a detection range from 1.07 to 100 μM and a detection limit of as low as 1.07 μM, accompanied with a blue-shift to 527 nm.

Preparation of Carbon Dots with Ultrahigh Fluorescence Quantum Yield Based on PET Waste

Environmentally friendly polyethylene terephthalate-based carbon dots (PET-CDs) with ultrahigh fluorescence quantum yield were prepared with waste PET textiles as raw materials. First, oligomers were prepared from the reaction of waste PET textile and ethylene glycol by the microwave method. Then, the mixture without isolation and purification as well as pyromellitic acid and urea were adopted as precursors for the preparation of PET-CDs by the hydrothermal method. It was found that the as-prepared PET-CDs had a spherical structure with an average particle size of 2.8 nm. The carbon core of PET-CDs was a graphene-like structure doped with nitrogen atoms in the form of pyrrole nitrogen and the surface contained -NH₂, which is convenient for modification and functionalization with various materials in the form of chemical bonds. The as-prepared PET-CDs exhibit excitation-independent emission properties in the range from 340 to 440 nm, and the best excitation and emission wavelengths of PET-CDs are 406 and 485 nm, respectively, while the fluorescence quantum yield is 97.3%. In terms of the application, the as-prepared PET-CDs could be adopted as a fluorescence probe for the detection of Fe³⁺, and the limit of detection is as low as 0.2 μmol/L. The mechanism of PET-CDs by Fe³⁺ was found to be the static quenching mechanism. In addition, PET-CDs can be used in LEDs and fluorescent anticounterfeiting.

Expanding the Scope of Nanobiocatalysis and Nanosensing: Applications of Nanomaterial Constructs

The synergistic interaction between advanced biotechnology and nanotechnology has allowed the development of innovative nanomaterials. Those nanomaterials can conveniently act as supports for enzymes to be employed as nanobiocatalysts and nanosensing constructs. These systems generate a great capacity to improve the biocatalytic potential of enzymes by improving their stability, efficiency, and product yield, as well as facilitating their purification and reuse for various bioprocessing operating cycles. The different specific physicochemical characteristics and the supramolecular nature of the nanocarriers obtained from different economical and abundant sources have allowed the continuous development of functional nanostructures for different industries such as food and agriculture. The remarkable biotechnological potential of nanobiocatalysts and nanosensors has generated applied research and use in different areas such as biofuels, medical diagnosis, medical therapies, environmental bioremediation, and the food industry. The objective of this work is to present the different manufacturing strategies of nanomaterials with various advantages in biocatalysis and nanosensing of various compounds in the industry, providing great benefits to society and the environment.

Sustainable agronomic response of carbon quantum dots on Allium sativum: Translocation, physiological responses and alternations in chromosomal aberrations

The revolutionary growth in the usage of carbon quantum dots (CQDs) in different areas have ultimately directed their discharge in the environment and further augmented the exposure of agricultural crops to these released particles. Therefore, the aim of current study is to evaluate the uptake, translocation and phytotoxicity of blue emissive CQDs on Allium sativum plant. The genotoxicity and cytotoxicity assessment of CQDs towards Allium sativum roots was estimated as function of three different concentrations. Considering the role of CQDs in promoting seed germination at 50 ppm concentration, a greenhouse experiment was performed to evaluate their effect on plant growth. Systematic investigations have shown the translocation of CQDs and their physiological response in terms of increased shoot length wherein P-CQDs exhibited more accumulation into Allium sativum parts. Our investigations unfold the opportunity to utilize Aegle marmelos fruit derived CQDs as a growth regulator in variety of other food plants.

Constructing novel graphitic carbon nitride-based nanocomposites - From the perspective of material dimensions and interfacial characteristics

Two-dimensional (2D) graphitic carbon nitride (g-C₃N₄), a fascinating metal-free conjugated polymer, has garnered immense interest in the fields of solar power generation and environmental remediation. The construction of g-C₃N₄-based nanocomposites with materials of various dimensions can further improve their photocatalytic activities by surface area enlargement, bandgap tuning, heterojunction formation, etc. In this paper, we comprehensively reviewed the design, synthesis, and functionalities of g-C₃N₄-based nanocomposites based on their applications in hydrogen evolution, CO₂ reduction, and pollutants removal. We provided detailed analyses on the integration of 2D g-C₃N₄ with zero-, one-, two-, and three-dimensional materials with a focus on their interfacial characteristics and functional improvement. This review aims to stimulate fresh ideas on the interfacial engineering of g-C₃N₄-based nanocomposites to broaden their future applications.

Red-Emissive Sulfur-Doped Carbon Dots for Selective and Sensitive Detection of Mercury (II) Ion and Glutathione

Carbon dots (CDs) show great potential in bioimaging and biosensing because of their good biocompatibility and excellent optical properties. However, CDs with intense red emissions for sensitive and selective detection are rarely reported. Herein, we prepared the red-emissive carbon dots (RCDs) through a facile hydrothermal method using tetra (4-carboxyphenyl) porphyrin (TCPP) and thiourea as starting materials. The obtained RCDs were characterized by TEM, XRD, and XPS. RCDs exhibited high water solubility and strong red emission (λ_em = 650 nm), with the fluorescence quantum yield as high as 26.7%, which was greatly higher than that of TCPP. Moreover, the as-prepared RCDs could be acted as a highly selective and sensitive probe for the detection of Hg²⁺ and glutathione (GSH) through the fluorometric titration method. The detection limits of Hg²⁺ and GSH were calculated to be 1.73 and 1.6 nM, respectively. The cellular experiments demonstrated the good biocompatibility of RCDs and their feasibility in bioimaging. Thus, this work provided a simple strategy to design and synthesize the highly red-emissive carbon dots, which showed promising application in biological and environmental assays.

Quick and hassle-free smartphone's RGB-based color to photocatalytic degradation rate assessment of malachite green dye in water by fluorescent Zr-N-S co-doped carbon dots

Sunlight active blue emissive zirconium, nitrogen, and sulfur co-doped carbon dots (Zr-N-S-CDs) have been synthesized by microwave-induced pyrolysis for achieving efficient photocatalytic degradation of pollutant malachite green dye (MG) in water. Surface morphology studies using high-resolution transmission electron microscopy confirmed the formation of spherical-shaped CDs with an absorbance peak at 350 nm and emission peak at 437 nm in UV-vis and fluorescence spectroscopy, respectively. Surface functional groups, elemental composition, and metal/non-metal co-doping were confirmed by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. To understand the photocatalytic performance of Zr-N-S-CDs, various parameters, such as the source of energy, concentration of dye, catalyst dosage, and change in pH, were investigated. MG dye (20 ppm) at a pH 7 with 0.5 mg/mL of Zr-N-S-CDs could be photodegraded efficiently in 90 min under sunlight (99%) compared to dark and artificial light conditions. Moreover, real-time analysis of degradation rate could be conveniently calculated by integrating the colorimetric responses of MG dye with RGB values obtained by the "Color Picker" app of a smartphone. The degradation rate obtained using a smartphone (97.89%) was found to be in agreement with the UV-vis spectroscopy (99%), thus, providing a new, handy, and instrument-free route for speedy and quantitative estimation of the degradation of hazardous MG dye by Zr-N-S-CDs.

Synergistic effects of the hybridization between boron-doped carbon quantum dots and n/n-type g-C3N4 homojunction for boosted visible-light photocatalytic activity

Dye wastewater has raised a prevalent environmental concern due to its ability to prevent the penetration of sunlight through water, thereby causing a disruption to the aquatic ecosystem. Carbon quantum dots (CQDs) are particularly sought after for their highly tailorable photoelectrochemical and optical properties. Simultaneously, graphitic carbon nitride (g-C₃N₄) has gained widespread attention due to its suitable band gap energy as well as excellent chemical and thermal stabilities. Herein, a novel boron-doped CQD (BCQD)-hybridized g-C₃N₄ homojunction (CN) nanocomposite was fabricated via a facile hydrothermal route. The optimal photocatalyst sample, 1-BCQD/CN (with a 1:3 mass ratio of boron to CQD) accomplished a Rhodamine B (RhB, 10 mg/L) degradation efficiency of 96.8% within 4 h under an 18 W LED light irradiation. The kinetic rate constant of 1.39 × 10^-2 min^-1 achieved by the optimum sample was found to be 3.6- and 2.8-folds higher than that of pristine CN and un-doped CQD/CN, respectively. The surface morphology, crystalline structure, chemical composition and optical properties of photocatalyst samples were characterized via TEM, FESEM-EDX, XRD, FTIR, UV-Vis DRS and FL spectrometer. Based on the scavenging tests, it was revealed that the photogenerated holes (h⁺), superoxide anions (∙O₂^-) and hydroxyl radicals (∙OH) were the primary reactive species responsible for the photodegradation process. Overall, the highly efficient 1-BCQD/CN composite with excellent photocatalytic activity could provide a cost-effective and robust means to address the increasing concerns over global environmental pollution.

A Review on the Catalytic Remediation of Dyes by Tailored Carbon Dots

Water polluted with dyes has become a serious global concern during the twenty-first century, especially for developing countries. Such types of environmental contaminant pose a severe threat to biodiversity, ecosystems, and human health globally; therefore, its treatment is an utmost requirement. Advanced technologies including the use of nanomaterials represent a promising water treatment technology with high efficiencies, low production costs, and green synthesis. Among the nanomaterials, carbon dots, as a new class of carbon-based nanoparticles, have attracted attention due to their unique features and advantages over other nanomaterials, which include high water solubility, easy fabrication and surface functionalisation, excellent electron-donating ability, and low toxicity. Such properties make carbon dots potential nanocatalysts for the Fenton-like degradation of environmental pollutants in water. Although recent studies show that carbon dots can successfully catalyse the degradation of dyes, there are still limited and controversial studies on the ecotoxicity and fate of these nanoparticles in the environment. In this review, the authors aim to summarise the recent research advances in water remediation by technologies using carbon dots, discuss important properties and factors for optimised catalytic remediation, and provide critical analysis of ecotoxicity issues and the environmental fate of these nanoparticles.

Applications of Carbon Dots for the Photocatalytic and Electrocatalytic Reduction of CO2

The photocatalytic and electrocatalytic conversion of CO2 has the potential to provide valuable products, such as chemicals or fuels of interest, at low cost while maintaining a circular carbon cycle. In this context, carbon dots possess optical and electrochemical properties that make them suitable candidates to participate in the reaction, either as a single component or forming part of more elaborate catalytic systems. In this review, we describe several strategies where the carbon dots participate, both with amorphous and graphitic structures, in the photocatalysis or electrochemical catalysis of CO2 to provide different carbon-containing products of interest. The role of the carbon dots is analyzed as a function of their redox and light absorption characteristics and their complementarity with other known catalytic systems. Moreover, detailed information about synthetic procedures is also reviewed.

Decontamination of emerging pharmaceutical pollutants using carbon-dots as robust materials

Environmental pollution is a critical issue that requires proper measures to maintain environmental health in a sustainable and effective manner. The growing persistence of several active pharmaceutical residues, such as antibiotics like tetracycline, and anti-inflammatory drugs like diclofenac in water matrices is considered an issue of global concern. Numerous sewage/drain waste lines from the domestic and pharmaceutical sector contain an array of toxic compounds, so-called "emerging pollutants" and possess adverse effects on entire living ecosystem and damage its biodiversity. Therefore, effective solution and preventive measures are urgently required to sustainably mitigate and/or remediate pharmaceutically active emerging pollutants from environmental matrices. In this context, herein, the entry pathways of the pharmaceutical waste into the environment are presented, through the entire lifecycle of a pharmaceutical product. There is no detailed review available on carbon-dots (CDs) as robust materials with multifunctional features that support sustainable mitigation of emerging pollutants from water matrices. Thus, CDs-based photocatalysts are emerging as an efficient alternative for decontamination by pharmaceutical pollutants. The addition of CDs on photocatalytic systems has an important role in their performance, mainly because of their up-conversion property, transfer photoinduced electron capacities, and efficient separation of electrons and holes. In this review, we analyze the strategies followed by different researchers to optimize the photodegradation of various pharmaceutical pollutants. In this manner, the effect of different parameters such as pH, the dosage of photocatalyst, amount of carbon dots, and initial pollutant concentration, among others are discussed. Finally, current challenges are presented from a pollution prevention perspective and from CDs-based photocatalytic remediation perspective, with the aim to suggest possible research directions.

Enzyme-mimicking capacities of carbon-dots nanozymes: Properties, catalytic mechanism, and applications - A review

Nanozymes, novel engineered nanomaterial-based artificial enzymes, have been developed to overcome intrinsic drawbacks exist in natural enzymes including high-cost storage, structural instability, and chemical sensitivity. More recently, carbon dots (CDs) have received significant attention due to their biocompatibility, high catalytic activity, and simple surface functionalization, thus emerging as possible alternatives for biomedical and environmental applications. In this review, we analyze methods and precursors used to synthesize CDs with enzyme-mimicking behaviors. In addition, approaches such as doping or constructing hybrid nanozymes are included as possible strategies to enhance the catalytic performance of CDs. Recent studies have reported CDs that mimic different oxidoreductases, exhibiting peroxidase-, catalase-, oxidase/laccase-, and superoxide dismutase-like activities. Therefore, this review presents a detailed discussion of the mechanism, recent advances, and application for each oxidoreductase-like activity reported on nanozymes based on CDs nanomaterials. Finally, current challenges faced in the successful translation of CDs to potential applications are addressed to suggest research directions.

Sunlight promoted removal of toxic hexavalent chromium by cellulose derived photoactive carbon dots

A scalable synthetic procedure for fabricating photoactive carbon dots (CD) from microcrystalline cellulose (MCC) is presented. The MCC was transformed into a photoactive nanosized CD by a one-step acid-assisted thermal-carbonization (~90 °C for 30 min). The efficiency of the obtained CD was determined by photo-removal of toxic hexavalent chromium (Cr(VI)) ions from wastewater. CD obtained from cellulose completely removed 20 ppm of Cr(VI) wastewater within ∼120 min under sunlight illumination. No Cr(VI) removal was observed in dark conditions and with control cellulose material as reference samples. The Cr(VI) removal follows pseudo-first-order kinetics along with a half-life of ∼26 min. Furthermore, the Cr(VI) removal from wastewater was supported via cyclic voltammetry analysis. Using a low-cost, naturally available cellulose material and sulfuric acid, the world's most-used chemical, creates techno-economic prerequisites for a scalable process of photoactive carbon dots.

Naproxen release from carbon dot coated magnetite nanohybrid as versatile theranostics for HeLa cancer cells

Nanohybrid magnetite carbon dots (Fe₃O₄@CDs) were successfully synthesized to improve their applicability in multi-response bioimaging. The nanohybrid was prepared via pyrolysis and further loaded with naproxen (NAP) to promote drug delivery features. The characterization of the synthesized Fe₃O₄@CDs demonstrated the existence of Fe₃O₄ crystals by matching with JCPDS 75-0033 and its narrow size distribution at 11.30 nm; further, FTIR spectra confirmed the presence of Fe–O groups, C–O stretching, C–H sp², and C–O bending, along with dual-active fluorescence and magnetic responses. The nanohybrids also exhibit particular properties such as a maximum wavelength of 230.5 nm, maximum emission in the 320–420 nm range, and slight superparamagnetic reduction (Fe₃O₄: 0.93620 emu per g; Fe₃O₄@CDs: 0.64784 emu per g). The cytotoxicity assessment of the nanohybrid revealed an excellent half-maximal inhibitory concentration (IC₅₀) of 17 671.5 ± 1742.6 μg mL⁻¹. Then, the incorporation of NAP decreased the cell viability to below 10%. The kinetic release properties of NAP are also confirmed as pH-dependent, and they follow the Korsmeyer–Peppas kinetics model. These results indicated that the proposed Fe₃O₄@CDs can be used as a new model for theranostic treatment.

Nanohybrid magnetite carbon dots (Fe₃O₄@CDs) were successfully synthesized to improve their applicability in multi-response bioimaging.

Carbon-Based Materials in Photodynamic and Photothermal Therapies Applied to Tumor Destruction

Within phototherapy, a grand challenge in clinical cancer treatments is to develop a simple, cost-effective, and biocompatible approach to treat this disease using ultra-low doses of light. Carbon-based materials (CBM), such as graphene oxide (GO), reduced GO (r-GO), graphene quantum dots (GQDs), and carbon dots (C-DOTs), are rapidly emerging as a new class of therapeutic materials against cancer. This review summarizes the progress made in recent years regarding the applications of CBM in photodynamic (PDT) and photothermal (PTT) therapies for tumor destruction. The current understanding of the performance of modified CBM, hybrids and composites, is also addressed. This approach seeks to achieve an enhanced antitumor action by improving and modulating the properties of CBM to treat various types of cancer. Metal oxides, organic molecules, biopolymers, therapeutic drugs, among others, have been combined with CBM to treat cancer by PDT, PTT, or synergistic therapies.

Nanocarbon for Energy Material Applications: N2 Reduction Reaction

Nanocarbons are an important class of energy materials and one relevant application is for the nitrogen reduction reaction, i.e., the direct synthesis of NH₃ from N₂ and H₂ O via photo- and electrocatalytic approaches. Ammonia is also a valuable energy or hydrogen vector. This perspective paper analyses developments in the field, limiting discussion to nanocarbon-based electrodes. These aspects are discussed: i) active sites related to charge density differences on C atoms associated to defects/strains, ii) doping with heteroatoms, iii) introduction of isolated metal ions, iv) creation and in situ dynamics of metal oxide(hydroxide)/nanocarbon boundaries, and v) nanocarbon characteristics to control the interface. Discussion is focused on the performances and mechanistic aspects. Aim is not a systematic state-of-the-art report but to highlight the need to use a different perspective in studying this challenging reaction by using selected papers. Notwithstanding the large differences in the proposed nature of the active sites, fall all within a restricted range of performances, far from the targets. A holistic approach is emphasized to make a breakthrough advance.

Influence of carbon nano-dots in water on sonoluminescence

Sonoluminescence (SL) occurs when acoustically induced oscillating bubbles in a liquid collapse. The SL from pure water normally generates ultraviolet to blue emission which is related to hydroxyl plasma formed in and around the bubbles. It is known that carbon nano-dots (CNDs) can serve as free radical captors, where the C-bonds can couple strongly with free radicals and form C-based functional groups. In this work, a SL experiment is conducted via placing CND aqueous solution (CNDAS) in the focal area of the SL apparatus. Unexpectedly and dramatically, it is found that the color of SL now turns orange, which is so bright that it can be seen even by the naked eye. By examining the CNDAS before and after the SL experiment, it is observed that the influence of CNDs on optical absorption, photoluminescence and SL is mainly achieved via coupling between the C-bonds in the CNDs and the free hydroxyl radicals generated during the processes of acoustically driven cavitation and SL. The interesting and important findings from this work demonstrate that the CNDs in water can modify significantly the SL effect. Thus, CNDs can provide a new test medium for studying and revealing the microscopic mechanism of the SL phenomenon.

Assemblies of Polyacrylonitrile-Derived Photoactive Polymers as Blue and Green Light Photo-Cocatalysts for Cu-Catalyzed ATRP in Water and Organic Solvents

Photoluminescent nanosized quasi-spherical polymeric assemblies prepared by the hydrothermal reaction of polyacrylonitrile (PAN), ht-PLPPAN, were demonstrated to have the ability to photo-induce atom transfer radical polymerization (ATRP) catalyzed by low, parts per million concentrations of CuII complex with tris(2-pyridylmethyl)amine (TPMA). Such photo induced ATRP reactions of acrylate and methacrylate monomers were performed in water or organic solvents, using ht-PLPPAN as the photo-cocatalyst under blue or green light irradiation. Mechanistic studies indicate that ht-PLPPAN helps to sustain the polymerization by facilitating the activation of alkyl bromide species by two modes: 1) green or blue light-driven photoreduction of the CuII catalyst to the activating CuI form, and 2) direct activation of dormant alkyl bromide species which occurs only under blue light. The photoreduction of the CuII complex by ht-PLPPAN was confirmed by linear sweep voltammetry performed under illumination. Analysis of the polymerization kinetics in aqueous media indicated even though CuI complexes comprised only 1-1.4% of all Cu species at equilibrium, they exhibited high activation rate constant and activated the alkyl bromide initiators five to six orders of magnitude faster than ht-PLPPAN.