Application progress of enhanced coagulation in water treatment

Three different methods for ZnO-RGO nanocomposite synthesis and its adsorption capacity for methylene blue dye removal in a comparative study

Water is one of the vital needs of life. However, due to rapid industrialization, urbanization and lack of awareness, the world population now facing the threat of water shortage. To ensure that future living conditions are preserved, it is crucial to reduce water pollution and protect the ecosystem. Zinc oxide- reduced graphene oxide (ZnO-RGO) nanocomposite is used in this study as an adsorbent for the adsorption of methylene blue (MB) dye from an aqueous solution. An easy strategy was used for the synthesis of reduced graphene oxide nanoparticles (RGO), Zinc oxide nanoparticles (ZnO) and ZnO-RGO nanocomposite. The synthesis of reduced graphene oxide (RGO) was accomplished through the exothermic reaction of a modified Hummer's method. In a novel approach, zinc oxide nanoparticles (ZnO NPs) were synthesized using the green Leidenfrost technique. This study presents a comparative investigation of ZnO-RGO nanocomposite synthesis employing both green and chemical methods. Three distinct approaches were utilized to prepare the ZnO-RGO nanocomposite: (1) the innovative Leidenfrost green method for composite A1, (2) a chemical precipitation method for composite A2, and (3) a physical mixing sonication method for composite A3. This research marks the first application of the Leidenfrost technique in the synthesis of ZnO-RGO nanocomposites, contributing to the growing body of knowledge in this field. X-ray diffraction (XRD), Burnauer-Emmett-Teller (BET), Fourier transform infrared (FTIR), Zeta potential, transmittance electron microscope (TEM) and scanning electron microscope (SEM) analyses are conducted for synthesized sample characterization. Comparing the XRD patterns of the three synthesis methods, it is notable that the intensity peaks of composite A3 were the highest when ZnO was synthesized using a green method, indicating a higher degree of crystallinity. FTIR analysis approves that combining ZnO with RGO affects the functional groups of the three nanocomposite surfaces. The SEM analysis shows ZnO NPs and RGO sheets are incorporated together. In the case of A1 composite sharp angles make a flower shape was observed due to the unique synthesizing method. The surface area for A2 composite is the highest (7.29 m2/g) compared with A1 (2.91 m2/g) and A3(1.90 m2/g). A comparison study is made among the three nanocomposites for MB dye removal. The effect of adsorbent dose, pH, contact time and initial dye concentration on dye adsorption has been studied. The results show that A1 and A2 nanocomposites removed 85.5 and 87.5% of MB at the optimum adsorbent dose of 0.15 g/100 ml at pH8 and A3 removed 95% of MB at the optimum dose of 0.1 g/100 ml at pH 2. All three composites exhibited adherence to the Langmuir isotherm model, with correlation coefficients (R2) of 0.9858, 0.9904, and 0.9959 for A1, A2, and A3, respectively. Kinetic study results demonstrated that the pseudo-second-order model best described the adsorption process for all three composites, yielding R2 values of 0.9998, 0.9988, and 1.0000 for A1, A2, and A3, respectively. The A3 nanocomposite shows the highest adsorption capacity (104.5 mg/g) compared to the other composites (87.7 and 97.5 mg/g for A1 and A2, respectively). Desorption experiments revealed that the dye removal percentages varied with the ratio of the ethanol-water mixture used. Absolute ethanol achieved a 90% removal compared with 1:1 and 1:2 aqueous ethanol solutions (87.5% and 80%, respectively).

Review on the impact of heavy metals from industrial wastewater effluent and removal technologies

The incidence of water pollution in developing countries is high due to the lack of regulatory policies and laws that protect water bodies from anthropogenic activities and industrial wastewater. Industrial wastewater contains significant amounts of heavy metals that are detrimental to human health, aquatic organisms, and the ecosystem. The focus of this review was to evaluate the sources and treatment methods of wastewater, with an emphasis on technologies, advantages, disadvantages, and innovation. It was observed that conventional methods of wastewater treatment (such as flotation, coagulation/flocculation, and adsorption) had shown promising results but posed certain limitations, such as the generation of high volumes of sludge, relatively low removal rates, inefficiency in treating low metal concentrations, and sensitivity to varying pH. Recent technologies like nanotechnology, photocatalysis, and electrochemical coagulation have significant advantages over conventional methods for removing heavy metals, including higher removal rates, improved energy efficiency, and greater selectivity for specific contaminants. However, the high costs associated with these advanced methods remain a major drawback. Therefore, we recommend that future developments in wastewater treatment technology focus on reducing both costs and waste generation.

Recovery of protein from tofu whey wastewater using protein-based coagulant

Tofu whey wastewater is the protein-rich liquid by-product of tofu production that has the potential as a source stream for biobased products. Coagulation can be used to recover protein from tofu whey. Biobased coagulants are alternatives for polymer- and metal-based coagulants, particularly if the precipitate is recovered and used for further processes. The tofu whey coagulation performance of three protein-based coagulants, namely soy protein isolate, Moringa oleifera seed, and isolate of Moringa seed protein, was determined with the jar test method. The pH (4, 5, 7, 9) and protein dosage (33-191 mg-protein/L) were varied. The results were compared with chitosan, as a benchmark for biobased coagulants, with similar pH variation and 100-800 mg-chitosan/L dosage variation. Our experiment showed that the optimum pH for protein coagulation was 4 (the initial pH of the tofu whey). Up to 95% turbidity could be removed, with chitosan shown to be the most effective coagulant. On the other hand, chitosan only removed up to 9% of organics as chemical oxygen demand (COD), while soy protein isolate could remove up to 20%. The highest protein removal was obtained by soy protein isolate (35%) followed by Moringa seed (34%), chitosan (25%), and Moringa seed protein (13%). Meanwhile, coagulation with soy protein isolate could recover 11% protein in the precipitate at 60% protein content. Higher protein removal compared to COD suggests a preference towards protein coagulation compared with other organics. Our results suggest that protein-based materials can be applied to recover proteins from tofu whey.

Application of cloud point extraction coupled with derivative spectrophotometry to remove binary mixture of Cresol Red and Methyl Orange dyes from aqueous solutions: Box-behnken design optimization

Cloud point extraction (CPE) was employed to eliminate Cresol Red (CR) and Methyl Orange (MO), as anionic dyes in a binary mixture from aqueous solutions. To remove these dyes Triton X-100 and NaCl at pH 5.7 were utilized. In this vein, wavelengths of 365 nm and 520 nm were respectively selected for CR and MO using the derivative spectrophotometer and first-order derivatives. According to based on the first-order derivative spectrophotometry, the recoveries rised from 94.3 to 99.5 % for CR and from 94.6 to 99.1 % for MO. In the following, the response surface methodology was administered to investigate the effect of surfactant concentration, temperature, and time on the dyes' elimination process. The quadratic mathematical model was obtained from the Box-Behnken design (BBD) matrix and developed to estimate the impact of each variable and its relationship with the elimination parameters. Later, coefficients of determination (R2) ≥0.97 were obtained using model equations and comparison between predicted and empirical values. Analysis of variance estimated the models' significance and anticipation while processing the study variables. Based on the results, the model of pseudo-first-order in kinetic modelling can best describe dyes adsorption among the studied models. The analyzed dyes adhere to the Langmuir model with correlation values of 0.86 for CR and 0.87 for MO. The monolayer capacity (Qmax) was determined as 0.77 mol/mol for CR and 26.41 mol/mol for MO.

Structure properties and industrial applications of anion exchange resins for the removal of electroactive nitrate ions from contaminated water

The presence of nitrates in lakes, rivers, and groundwater is common. Anion exchange resins (AER) are polymeric structures that contain functional groups as well as a variety of particle sizes that are used for removing nitrate ions from solutions. This article provides a concise review of the types and properties of AER, synthesis methods, characterization, and environmental applications of AER. It discusses how different factors affect the adsorption process, isotherm and kinetic parameters, the adsorption mechanism, and the maximum adsorption capacities. Additionally, the present review addresses AER's regeneration and practical stability. It emphasizes the progress and proposes future strategies for addressing nitrate pollution using AER to overcome the challenges. This review aims to act as a reference for researchers working in the advancement of ion exchange resins and presents a clear and concise scientific analysis of the use of AER in nitrate adsorption. It is evident from the literature survey that AER is highly effective at removing nitrate ions from wastewater effluents.

Efficient removal of per- and polyfluoroalkyl substances (PFASs) from stored rainwater by composite metal salt /polydimethyldiallylammonium chloride coagulants

Stored rainwater, the primary source of drinking water in the villages and towns of the Loess Plateau in northwest China, has been found to contain per- and polyfluoroalkyl substances (PFASs) and lacks necessary treatment measures. Coagulation is a common water treatment process, and enhancing its efficacy in removing PFASs can significantly improve treatment efficiency, reduce costs, and minimize the environmental and health risks associated with perfluorinated compounds. This study investigated the removal efficiency of perfluorobutanoic acid (PFBA), perfluorobutanesulfonic acid (PFBS), perfluorooctanoic acid (PFOA), and perfluorooctanesulfonic acid (PFOS) using inorganic salt coagulants alone and in combination with polydimethyldiallylammonium chloride (PDMDAAC). The results indicated that the removal efficiencies of the four PFASs by polyferric chloride (PFCl) and polyaluminum chloride (PACl) increased with alkalinity. PDMDAAC significantly enhanced the coagulation removal efficiency of the four PFASs. The removal efficiency of the four PFASs was highest when the raw water pH was near 7. Within the molecular weight range of 0-500,000 for PDMDAAC, the removal efficiency of the four PFASs increased with increasing molecular weight. Charge neutralization is the primary coagulation mechanism for the removal of anionic PFASs. Therefore, this study provides guidance for selecting coagulants to remove PFASs from stored rainwater.

Enhanced coagulation for removal of dissolved organic nitrogen in water: A review

Wastewater treatment plants (WWTPs) meeting strict nutrient discharge regulations typically effectively remove inorganic nitrogen, leaving dissolved organic nitrogen (DON) as the main component of total nitrogen in the effluent. DON in treated effluent from both WWTPs and drinking water treatment plants (DWTPs) has the potential to induce eutrophication and contribute to the formation of nitrogenous disinfection byproducts (N-DBP). While numerous studies have investigated DON in different water sources, a limited number of studies have focused on its removal through enhanced coagulation. The variable removal efficiencies of dissolved organic carbon (DOC) and DON in treatment processes highlight the need for comprehensive research on enhanced coagulation for DON removal. Enhanced coagulation is a viable option for DON removal, but underlying mechanisms and influencing factors are still being actively researched. The effectiveness of enhanced coagulation depends on DON characteristics and coagulant properties, but knowledge gaps remain regarding their influence on treatment. DON is a complex mixture of compounds, with only a small fraction identified, such as proteins, degraded amino acids, urea, chelating agents, humic substances, and soluble microbial products. Understanding molecular-level characteristics of DON is crucial for identifying unknown compounds and understanding its fate and transformation during treatment processes. This review identifies knowledge gaps regarding enhanced coagulation process for DON removal, including the role of coagulant aids, novel coagulants, and pretreatment options. It discusses DON characteristics, removal mechanisms, and molecular-level transformation of DON during enhanced coagulation. Addressing these gaps can lead to process optimization, promote efficient DON removal, and facilitate safe water production.

Degradation of different fractions of natural organic matter in drinking water by the UV/persulfate process

The existence of natural organic matter (NOM) causes many problems in drinking water treatment processes. The degradation of different fractions of NOM in drinking water was studied using the ultraviolet/persulfate (UV/PS) process. The NOM was separated into hydrophobic (HPO), transition hydrophilic (TPI) and hydrophilic (HPI) fractions by reverse osmosis and XAD series resins. The effects of degradation were evaluated by dissolved organic carbon (DOC), UV254, three-dimensional fluorescence-parallel factor analysis (EEM-PARAFAC), and trihalomethane formation potential (THMFP). The results showed that UV/PS process could remove the three fractions of DOC, UV254, as well as the fluorescent components humic acid-like (C1 and C2) and protein-like (C3). The maximum removal rates of DOC of HPO, TPI, and HPI fractions were 34.6%, 38.4%, and 73.9%, respectively, and the maximum removal rates of UV254 were 72.1%, 86.3%, and 86.8%, respectively. The removal rate of the three fluorescent components can reach 100%, and C3 is easier to remove than C1 and C2 under the low PS dosage conditions. The order of kinetic degradation rate constant of UV254 first-order reaction is HPI > TPI > HPO. The optimum pH conditions for the degradation of HPO, TPI, and HPI fractions were acidic, basic, and neutral, respectively. The specific THMFP of HPO was higher than that of TPI and HPI. The specific THMFP of HPO and TPI fractions increased with the increase of radiation time, while the HPI fraction showed the opposite trend. THMFP has different degrees of correlation with DOC, UV254, C1, and C2. This study can provide a theoretical basis for the selection of the UV/PS process for drinking water sources containing NOM with different characteristics.

Electrochemical processes for the treatment of contaminant-rich wastewater: A comprehensive review

Global water demand and environmental concerns related to climate change require industries to develop high-efficiency wastewater treatment methods to remove pollutants. Likewise, toxic pollutants present in wastewater negatively affect the environment and human health, requiring effective treatment. Although conventional treatment processes remove carbon and nutrients, they are insufficient to remove pharmaceuticals, pesticides, and plasticizers. Electrochemical processes effectively remove pollutants from wastewater through the mineralization of non-biodegradable pollutants with consequent conversion into biodegradable compounds. Its advantages include easy operation, versatility, and short reaction time. In this way, this review initially provides a global water scenario with a view to the future. It comprises global demand, treatment methods, and pollution of water resources, addressing various contaminants such as heavy metals, nutrients, organic compounds, and emerging contaminants. Subsequently, the fundamentals of electrochemical treatments are presented as well as electrochemical treatments, highlighting the latest studies involving electrocoagulation, electroflocculation, electroflotation, capacitive deionization and its derivatives, eletrodeionization, and electrochemical advanced oxidation process. Finally, the challenges and perspectives were discussed. In this context, electrochemical processes have proven promising and effective for the treatment of water and wastewater, allowing safe reuse practices and purification with high contaminant removal.

Synthesis of chitosan-based grafting magnetic flocculants for flocculation of kaolin suspensions

A series of novel chitosan-based magnetic flocculants FS@CTS-P(AM-DMC) was prepared by molecular structure control. The characterization results showed that FS@CTS-P(AM-DMC) had a uniform size of about 21.46 nm, featuring a typical core-shell structure, and the average coating layer thickness of CTS-P(AM-DMC) was about 5.03 nm. FS@CTS-P(AM-DMC) exhibited excellent flocculation performance for kaolin suspension, achieved 92.54% turbidity removal efficiency under dosage of 150 mg/L, pH 7.0, even at high turbidity (2000 NTU) with a removal efficiency of 96.96%. The flocculation mechanism was revealed to be dominated by charge neutralization under acidic and neutral conditions, while adsorption and bridging effects play an important role in alkaline environments. The properties of magnetic aggregates during flocculation, breakage, and regeneration were studied at different pH levels and dosages. In the process of magnetophoretic, magnetic particles collide and adsorb with kaolin particles continuously due to magnetic and electrostatic attraction, transform into magnetic chain clusters, and then further form three-dimensional network magnetic aggregates that can capture free kaolin particles and other chain clusters. Particle image velocimetry confirmed the formation of eddy current of magnetic flocs and experienced three stages: acceleration, stabilization, and deceleration.

Efficient Dye Extraction from Wastewater Using Indium-MOF-Immobilized Polyvinylidene Fluoride Membranes with Selective Filtration for Enhanced Remediation

Industrial activities have led to releasing harmful substances into the environment, necessitating the elimination of these toxic compounds from wastewater. Organic dyes, commonly found in industrial effluents, pose a threat to ecosystems and human health. Conventional treatment methods often suffer from limitations such as high cost and poor efficiency. Metal-organic frameworks (MOFs) have emerged as promising materials for selective separation, including membrane filtration (MF). Mixed-matrix membranes (MMMs) combining MOFs with polymers offer improved filtration properties. In this study, MMMs were fabricated by incorporating synthesized In-MOF with a polyvinylidene fluoride (PVDF) polymer (In-MOF@PVDF MMMs) using the nonsolvent-induced phase separation process. The MMMs were evaluated for the MF of various organic dyes, achieving notable removal efficiencies. The membrane containing 20% In-MOF (M4) demonstrated exceptional performance, removing 99% of the methylene blue (MB) dye. Additionally, membrane M4 effectively filtered Azure A (AZA), Azure B (AZB), and toluidine blue O (TOLO) with a removal efficiency of 99%. However, for Rhodamine B (RHB) and methyl orange (MO), the removal efficiencies were slightly lower at 74 and 39%, respectively. Further, these membranes are utilized in selective dye filtration in the MB+/RHB+ and MB+/MO- systems, where the selectivity was found for MB. The isothermal and DFT studies revealed the membrane's behavior with dye mixtures, while water stability and regeneration studies confirmed its durability. Thus, these findings highlight the potential of In-MOF@PVDF MMMs for effective and selective dye removal in wastewater treatment applications.

Three-Dimensional Printed Filters Based on Poly(ethylene glycol) Diacrylate Hydrogels Doped with Silver Nanoparticles for Removing Hg(II) Ions from Water

Nowadays, due to water pollution, more and more living beings are exposed to dangerous compounds, which can lead to them contracting diseases. The removal of contaminants (including heavy metals) from water is, therefore, a necessary aspect to guarantee the well-being of living beings. Among the most used techniques, the employment of adsorbent materials is certainly advantageous, as they are easy to synthesize and are cheap. In this work, poly(ethylene glycol) diacrylate (PEGDA) hydrogels doped with silver nanoparticles (AgNPs) for removing Hg(II) ions from water are presented. AgNPs were embedded in PEGDA-based matrices by using a photo-polymerizable solution. By exploiting a custom-made 3D printer, the filters were synthesized. The kinetics of interaction was studied, revealing that the adsorption equilibrium is achieved in 8 h. Subsequently, the adsorption isotherms of PEGDA doped with AgNPs towards Hg(II) ions were studied at different temperatures (4 °C, 25 °C, and 50 °C). In all cases, the best isotherm model was the Langmuir one (revealing that the chemisorption is the driving process and the most favorable one), with maximum adsorption capacities equal to 0.55, 0.57, and 0.61 mg/g, respectively. Finally, the removal efficiency was evaluated for the three temperatures, obtaining for 4 °C, 25 °C, and 50 °C the values 94%, 94%, and 86%, respectively.

Progressive Insights into Metal-Organic Frameworks and Metal-Organic Framework-Membrane Composite Systems for Wastewater Management

The sustainable management of wastewater through recycling and utilization stands as a pressing concern in the trajectory of societal advancement. Prioritizing the elimination of diverse organic contaminants is paramount in wastewater treatment, garnering significant attention from researchers worldwide. Emerging metal-organic framework materials (MOFs), bridging organic and inorganic attributes, have surfaced as novel adsorbents, showcasing pivotal potential in wastewater remediation. Nevertheless, challenges like limited water stability, elevated dissolution rates, and inadequate hydrophobicity persist in the context of wastewater treatment. To enhance the performance of MOFs, they can be modified through chemical or physical methods, and combined with membrane materials as additives to create membrane composite materials. These membrane composites, derived from MOFs, exhibit remarkable characteristics including enhanced porosity, adjustable pore dimensions, superior permeability, optimal conductivity, and robust water stability. Their ability to effectively sequester organic compounds has spurred significant research in this field. This paper introduces methods for enhancing the performance of MOFs and explores their potential applications in water treatment. It delves into the detailed design, synthesis strategies, and fabrication of composite membranes using MOFs. Furthermore, it focuses on the application prospects, challenges, and opportunities associated with MOF composite membranes in water treatment.

Conversion of locally available materials to biochar and activated carbon for drinking water treatment

For environmental sustainability and to achieve sustainable development goals (SDGs), drinking water treatment must be done at a reasonable cost with minimal environmental impact. Therefore, treating contaminated drinking water requires materials and approaches that are inexpensive, produced locally, and effortlessly. Hence, locally available materials and their derivatives, such as biochar (BC) and activated carbon (AC) were investigated thoroughly. Several researchers and their findings show that the application of locally accessible materials and their derivatives are capable of the adsorptive removal of organic and inorganic contaminants from drinking water. The application of locally available materials such as lignocellulosic materials/waste and its thermo-chemically derived products, including BC and AC were found effective in the treatment of contaminated drinking water. Thus, this review aims to thoroughly examine the latest developments in the use of locally accessible feedstocks for tailoring BC and AC, as well as their features and applications in the treatment of drinking water. We attempted to explain facts related to the potential mechanisms of BC and AC, such as complexation, co-precipitation, electrostatic interaction, and ion exchange to treat water, thereby achieving a risk-free remediation approach to polluted water. Additionally, this research offers guidance on creating efficient household treatment units based on the health risks associated with customized adsorbents and cost-benefit analyses. Lastly, this review work discusses the current obstacles for using locally accessible materials and their thermo-chemically produced by-products to purify drinking water, as well as the necessity for technological interventions.

Synthesis, characterization, and environmental applications of graphene-coated sand: A review

Global water quality has deteriorated, leaving over 844 million individuals without access to clean drinking water. While sand filters (SF) offer a solution, their limited surface area and adsorption capacity for emerging contaminants remain a challenge. This has prompted the development of new materials such as graphene-coated sand (GCS) to enhance the sand's adsorptive properties. Notably, GCS also possesses inherent anti-bacterial properties and can function as a photocatalyst when exposed to UV and visible light, offering enhanced water purification. This manuscript 1) reviews the synthesis of GCS, detailing the characterization techniques employed to understand its structure, composition, and multifunctional properties and 2) highlights the superior efficacy of GCS in removing contaminants, including metals (>95 % removal of Cd2+, Pb2+, Zn2+, and Cu2+ in low pH environment), sulfides (full removal compared to 26 % removal by raw sand), antibiotics (98 % removal of tetracycline), and bacteria (complete cell membrane destruction), compared to traditional SF. Due to its enhanced performance and multifaceted purification capabilities, GCS presents a promising alternative to SFs, especially in developing countries, aiming to improve water quality and ensure safe drinking water access. To the best of our knowledge, no other work groups the available research on GCS. Furthermore, future research directions should focus on reducing the overall production cost of GCS, exploring surface modification techniques, and expanding the range of contaminants tested by GCS, to fully realize its potential in water purification.

Magnetic coagulation and flocculation of kaolin suspension using Fe3O4 with plant polyphenol self-assembled flocculants

In this work, magnetic flocculant (Fe3O4@PP) was synthesized using plant polyphenol (PP) as a shaping ligand via in situ self-assembly. Characterization results revealed that Fe3O4@PP exhibited uniform particle size and excellent dispersibility with PP coating amount of 16.4 %. Experimental results suggested that Fe3O4@PP showed excellent turbidity removal efficiency in a wide pH range (3.0-10) and initial turbidity range (50-2000 NTU). Under the optimal conditions, Fe3O4@PP achieved 95.2 % of turbidity removal for simulated kaolin suspension and 96.9 % for actual wastewater. Fe3O4@PP exhibited excellent recycling and reusability properties, with high recycling efficiency of 93.3 % even after the fifth cycle. Microscopic observation revealed the formation process of magnetic flocs, involving particle aggregation, chain and cluster formation, and dense network aggregate formation. The structural characteristics and size of magnetic flocs were found to be significantly influenced by the combined effects of magnetic force, electric charge, van der Waals force, and functional groups on the surface of PP. The extended Deryaguin-Landau-Verwey-Overbeek models indicated that magnetic interactions were the primary mechanism for magnetic flocculation, accompanied by charge neutralization, adsorption bridging, sweeping, and net trapping.

Surfactant supported chitosan for efficient removal of Cr(VI) and anionic food stuff dyes from aquatic solutions

In order to develop a novel and cost-effective adsorbent with outstanding adsorption capacity and excellent recyclability for anionic pollutants, the chitosan-modified cetyltrimethylammonium bromide sorbent (CS@CTAB) was fabricated. Fourier-transform infrared spectroscopy, N2 adsorption-desorption isotherm, elemental analysis, Thermogravimetric analysis, X-ray diffraction, and Scanning electron microscopy have been applied to evaluate both raw and surfactant modified chitosan (CS@CTAB). Azorubine, Sunset Yellow, and hexavalent chromium were used to study the adsorption behavior of CS@CTAB under various parameters such as adsorbent dose, initial dye and metal ion concentration, contact time, and temperature. Adsorption equilibrium, kinetics models and thermodynamic parameters were investigated. The adsorption isotherm fitted well with the Langmuir isotherm model, with a maximum adsorption capacity of 492.6 mg/g, 492.6 mg/g, and 490.196 mg/g for Azorubine, Sunset Yellow, and Hexavalent Chromium, respectively. The kinetic studies showed that the pseudo-second-order model provided a better correlation between experimental data. Furthermore, the calculated thermodynamic parameters confirmed that the adsorption of Cr(VI), E110, and E122 by CS@CTAB material is a spontaneous and exothermic process. The fabricated CS@CTAB adsorbent was employed for the efficient elimination of Azorubine, Sunset Yellow, and hexavalent chromium from real water samples, synthetic mixtures, and colored soft drinks, with a percentage of recovery of ~ 96%. The plausible adsorption mechanisms of Azorubine, Sunset Yellow, and hexavalent chromium on the surface of CS@CTAB are elucidated. The adsorption anticipated to be due to electrostatic interaction and hydrogen bond formation for hexavalent chromium; while the adsorption of Azorubine and Sunset Yellow, was assumed to be due to electrostatic interaction, hydrogen bonding, and n-π interaction. Finally, the study demonstrates the efficiency of CS@CTAB for the removal of anionic species from several samples, including natural water and colored beverages.

Immobilization of Microcystin by the Hydrogel-Biochar Composite to Enhance Biodegradation during Drinking Water Treatment

Microcystin-LR (MC-LR), the most common algal toxin in freshwater, poses an escalating threat to safe drinking water. This study aims to develop an engineered biofiltration system for water treatment, employing a composite of poly(diallyldimethylammonium chloride)-biochar (PDDA-BC) as a filtration medium. The objective is to capture MC-LR selectively and quickly from water, enabling subsequent biodegradation of toxin by bacteria embedded on the composite. The results showed that PDDA-BC exhibited a high selectivity in adsorbing MC-LR, even in the presence of competing natural organic matter and anions. The adsorption kinetics of MC-LR was faster, and capacity was greater compared to traditional adsorbents, achieving a capture rate of 98% for MC-LR (200 μg/L) within minutes to tens of minutes. Notably, the efficient adsorption of MC-LR was also observed in natural lake waters, underscoring the substantial potential of PDDA-BC for immobilizing MC-LR during biofiltration. Density functional theory calculations revealed that the synergetic effects of electrostatic interaction and π-π stacking predominantly contribute to the adsorption selectivity of MC-LR. Furthermore, experimental results validated that the combination of PDDA-BC with MC-degrading bacteria offered a promising and effective approach to achieve a sustainable removal of MC-LR through an "adsorption-biodegradation" process.

Prospects and challenges of utilizing sugarcane bagasse as a bio-coagulant precursor for water treatment

Sugarcane bagasse is an abundant and renewable agricultural waste material generated by the sugar industry worldwide. The use of sugarcane bagasse as a bio-coagulant precursor in water treatment is an eco-friendly and cost-effective approach that has shown great potential. This article reviewed the prospects and challenges of utilizing sugarcane bagasse as a bio-coagulant precursor for water treatment. The article reviewed past studies and explored the properties and chemical composition of sugarcane bagasse and the bioactive compounds that can be extracted from it, as well as their potential coagulation performance in water treatment. It was observed that there are few studies that have been published on the subject. The effectiveness of sugarcane bagasse-based coagulants varies depending on several factors, such as pH, temperature, and water quality parameters. However, the lack of standardization in the production of sugarcane bagasse-based coagulants is a challenge that needs to be addressed. Additionally, the optimization of extraction and processing methods to enhance the effectiveness of sugarcane bagasse-based coagulants needs to be investigated further. In conclusion, the use of sugarcane bagasse as a bio-coagulant precursor holds great promise for the future of sustainable water treatment. The potential for sugarcane bagasse to be used as a bio-coagulant precursor highlights the importance of exploring alternative and sustainable materials for water treatment.

Metal/metal oxide-carbohydrate polymers framework for industrial and biological applications: Current advancements and future directions

Recently, the development and consumption of metal/metal oxide carbohydrate polymer nanocomposites (M/MOCPNs) are withdrawing significant attention because of their numerous salient features. Metal/metal oxide carbohydrate polymer nanocomposites are being used as environmentally friendly alternatives for traditional metal/metal oxide carbohydrate polymer nanocomposites exhibit variable properties that make them excellent prospects for a variety of biological and industrial uses. In metal/metal oxide carbohydrate polymer nanocomposites, carbohydrate polymers bind with metallic atoms and ions using coordination bonding in which heteroatoms of polar functional groups behave as adsorption centers. Metal/metal oxide carbohydrate polymer nanocomposites are widely used in woundhealing, additional biological uses and drug delivery, heavy ions removal or metal decontamination, and dye removal. The present review article features the collection of some major biological and industrial applications of metal/metal oxide carbohydrate polymer nanocomposites. The binding affinity of carbohydrate polymers with metal atoms and ions in metal/metal oxide carbohydrate polymer nanocomposites has also been described.

New trajectories of technologies for the removal of pollutants and emerging contaminants in the environment

Modern society has increasingly a diffusion of pollutants and emerging contaminants (e.g., different types of chemicals and endocrine disruptors in pharmaceuticals, pesticides, household cleaning, and personal care products, etc.) that have detrimental effects on the environment (atmosphere, hydrosphere, biosphere and anthroposphere) and also generate diseases and disorders on the people health. Environmental science requires efforts in the detection and elimination of manifold pollutants and emerging pollutants with appropriate product and process technologies. This study aims to analyze different paths of treatment technologies to investigate their evolution and predict new directions of promising technological trajectories to support the removal of contaminants directed to reach, whenever possible, sustainable development objectives. The work is mainly devoted to wastewater treatment technologies. A proposed model analyzes the evolution of patents (proxy of innovation and new technology) on publications (proxy of science and knowledge advances) to quantify the relative growth rate of new trajectories of technologies to remove pollutants and emerging contaminants. Results reveal that new directions of treatment technologies having an accelerated rate of growth are (in decreasing order): biochar and reverse osmosis in physical-based technologies, coagulation, and disinfection water treatments in chemical-based technologies and anaerobic processes in biological-based technologies. Other main technologies, such as carbon nanotubes and advanced oxidation processes, seem to be in the initial phase of development and need learning by using processes and further science and technology advances to be implemented as effective treatments and cost-effective. The results here are in accord with global water and wastewater equipment treatment market revenues by technology, showing a similar trend. These findings bring us to the main information to extend the knowledge about new directions of technologies for the treatment and/or elimination of pollutants and microorganisms that can support decisions of policymakers towards goals of sustainable development by reducing environmental degradation and people health disorders.

Bismuth-based nanostructured photocatalysts for the remediation of antibiotics and organic dyes

A serious threat to human health and the environment worldwide, in addition to the global energy crisis, is the increasing water pollution caused by micropollutants such as antibiotics and persistent organic dyes. Nanostructured semiconductors in advanced oxidation processes using photocatalysis have recently attracted a lot of interest as a promising green and sustainable wastewater treatment method for a cleaner environment. Due to their narrow bandgaps, distinctive layered structures, plasmonic, piezoelectric and ferroelectric properties, and desirable physicochemical features, bismuth-based nanostructure photocatalysts have emerged as one of the most prominent study topics compared to the commonly used semiconductors (TiO2 and ZnO). In this review, the most recent developments in the use of photocatalysts based on bismuth (e.g., BiFeO3, Bi2MoO6, BiVO4, Bi2WO6, Bi2S3) to remove dyes and antibiotics from wastewater are thoroughly covered. The creation of Z-schemes, Schottky junctions, and heterojunctions, as well as morphological modifications, doping, and other processes are highlighted regarding the fabrication of bismuth-based photocatalysts with improved photocatalytic capabilities. A discussion of general photocatalytic mechanisms is included, along with potential antibiotic and dye degradation pathways in wastewater. Finally, areas that require additional study and attention regarding the usage of photocatalysts based on bismuth for removing pharmaceuticals and textile dyes from wastewater, particularly for real-world applications, are addressed.

A rapid, high-throughput, and sensitive PEG-precipitation method for SARS-CoV-2 wastewater surveillance

The effective application of wastewater surveillance is dependent on testing capacity and sensitivity to obtain high spatial resolution testing results for a timely targeted public health response. To achieve this purpose, the development of rapid, high-throughput, and sensitive virus concentration methods is urgently needed. Various protocols have been developed and implemented in wastewater surveillance networks so far, however, most of them lack the ability to scale up testing capacity or cannot achieve sufficient sensitivity for detecting SARS-CoV-2 RNA at low prevalence. In the present study, using positive raw wastewater in Hong Kong, a PEG precipitation-based three-step centrifugation method was developed, including low-speed centrifugation for large particles removal and the recovery of viral nucleic acid, and medium-speed centrifugation for the concentration of viral nucleic acid. This method could process over 100 samples by two persons per day to reach the process limit of detection (PLoD) of 3286 copies/L wastewater. Additionally, it was found that the testing capacity could be further increased by decreasing incubation and centrifugation time without significantly influencing the method sensitivity. The entire procedure uses ubiquitous reagents and instruments found in most laboratories to obtain robust testing results. This high-throughput, cost-effective, and sensitive tool will promote the establishment of nearly real-time wastewater surveillance networks for valuable public health information.

Efficient Biosorption of Hexavalent Chromium from Water with Human Hair

The triphenyl group (trityl radical) possessing three-phenyl rings, self-assembled through aromatic π-π stacking interactions, can form interesting crystalline organic nano-flowers. In this work, we have synthesized a hybrid material of 1,2-bis(tritylthio)ethane and magnetite, which reduces toxic Cr(VI) to non-toxic Cr(III). We validated the efficacy of the hybrid in reducing toxic Cr(VI) along with three other adsorbent systems. Among the five adsorbent systems tested, we observed that human hair has higher Cr removal efficiency, which prompted us to explore further using different mechanical forms of human hair. Pulverized hair (PH), hair powder (HP), and raw hair (RH) were evaluated by employing different reaction factors such as the adsorbent dose, pH, initial Cr(VI) concentration, and contact time. The comparative evaluation showed that PH has greater adsorption capacity (15.14 mg/g), followed by RH (13.27 mg/g) and HP (10.5 mg/g). While investigating the adsorption mechanism, we observed that it follows pseudo-second-order kinetics suggesting chemisorption. The Freundlich isotherm model fitted well for Cr(VI) adsorption by human hair, suggesting a multi-layered adsorption process. Overall, this study promises a cost-effective and eco-friendly bio-adsorbent for Cr(VI), which may be scaled up to design automated industrial waste disposal systems.

Reducing disinfection byproduct precursors through coagulation enhancement as particle weight and size control using potassium permanganate

The widespread use of chlorine pre-oxidation in water purification has been limited in several countries owing to the production of carcinogenic byproducts when combined with naturally occurring organic matter. This study investigates the efficient use of potassium permanganate (KMnO₄) pretreatment and coagulation enhancement as particle size and molecular weight distribution controlling parameters. KMnO₄ pretreatment significantly reduced the apparent molecular weight of humic acid due to KMnO₄ reduction and the continuous generation of manganese dioxide (MnO₂) formed in situ under neutral and alkaline conditions. The MnO₂ formed in situ had adsorption characteristics that enabled it to form large and stable flocs with the hydrolysis products of aluminum sulfate. However, under acidic conditions, KMnO₄ pretreatment exhibited strong oxidation characteristics due to Mn(VII) reduction to Mn(II), and the mean particle floc size was the same as without KMnO₄ pretreatment. Overall, KMnO₄ pretreatment is a useful alternative strategy for traditional pre-oxidation using chlorine and a good coagulant enhancement agent in neutral and basic media.

Evaluating Al-based coagulants for drinking water facilities using Jar test and CCD/RSM analysis

This study evaluated Al-based coagulants for turbidity removal optimization in drinking water facility using Jar test and CCD/RSM analysis. The wide use of aluminum salts requires researching improved Al-based coagulants to reduce the treatment dosage. Eight polyaluminum chloride coagulants (PACl), i.e., Hyperlon 4064-PACl 2, Hyperlon 4393, 1757 X1, 1757 XL8- PACl 1, Ultrafloc 1406, Ultrafloc 3759, AlcoPAC 6, and AlcoPAC 1010 were first compared using a series of jar tests to determine the best candidate in removing the settled and filtered turbidity in water. The results showed that all PACls performed better than alum in removing water turbidity, but Hyperlon 4064 was the best. Then, the central composite design/response surface methodology (CCD/RSM) analysis was applied to Hyperlon 4064 to optimize dosage and pH to achieve the lowest final settled and filtered turbidity in the treated water, which were 21.7 mg/L, 7.53 and 27.95 mg/L, 7.91, respectively. Two quadratic models were generated by the CCD/RSM analysis with high correlations between the actual and predicted responses (R² = 0.9881 and 0.9809 for final settled turbidity and final filtered turbidity). The results from this study can provide useful information to the operating water treatment plants that use Al-based coagulants to remove turbidity in water.

Magnetic Field Effect on Coagulation Treatment of Wastewater Using Magnetite Rice Starch and Aluminium Sulfate

The use of synthetic coagulants to reduce suspended particles from drinkable water and wastewater is prompting new issues because it poses many health and environmental risks. Hence, improving the coagulation process using sophisticated nanotechnology with a magnetic field (MF) for quick recoverability emerges as being useful. In this study, the effects of magnetite rice starch (MS) and aluminum sulfate (alum) were investigated at a constant dose (3 g or 3000 mg/L) using a Jar test (six beakers) as potential low-cost coagulants for industrial wastewater treatment. At a high magnification of 1000× and a surface pore size of 298 µm, scanning electron microscopy and energy dispersive X-ray (SEM/EDX) analyses were utilized to elucidate the morphology of the coagulants. Coagulation was performed at 150 rpm (quick mixing) for 2 min, and 30 rpm (slow mixing) for 15 min. Thereafter, samples were allowed to settle (10-60 min) with and without MF. The findings showed more than 65% contaminants removal (turbidity and TSS) and 30% chemical oxygen demand (COD) removal using alum while MS showed 80% contaminants removal (turbidity and TSS) and 50% COD removal. MS showed an increase of more than 3% in contaminants removal (COD, turbidity, and TSS) when exposed to MF. As a result, the use of MS together with MF in water and wastewater treatment is anticipated as an environmentally benign and effective coagulant.

Effect of Magnetized Coagulants on Wastewater Treatment: Rice Starch and Chitosan Ratios Evaluation

Coagulation with synthetic chemicals has been used to treat a wide range of industrial effluents. Herein, the unique characteristics of industrial effluents being detrimental to the environment warrants urgent resource-efficient and eco-friendly solutions. Therefore, the study investigated the use of two magnetized coagulants (chitosan magnetite (CF) and rice starch magnetite (RF)), prepared via co-precipitation in three different ratios (1:2, 1:1 and 2:1) of natural coagulants (chitosan or rice starch) and magnetite nanoparticles (F) as alternative coagulants to alum for the treatment of wastewater. A Brunauer–Emmett–Teller (BET) analyzer, an X-ray diffraction (XRD) analyzer, and energy-dispersive X-ray (EDX) spectroscopy were used to characterize the surface area, crystal structure, and elemental composition of the coagulants. The influences of settling time (10–60 min) on the reduction of turbidity, color, phosphate, and absorbance were studied. This was carried out with a jar test coupled with six beakers operated under coagulation conditions of rapid stirring (150 rpm) and gentle stirring (30 rpm). Wastewater with an initial concentration of 45.6 NTU turbidity, 315 Pt. Co color, 1.18 mg/L phosphate, 352 mg/L chemical oxygen demand (COD), and 73.4% absorbance was used. The RF with a ratio of 1:1 was found to be the best magnetized coagulant with over 80% contaminant removal and 90% absorbance. The treatability performance of RF (1:1) has clearly demonstrated that it is feasible for wastewater treatment.

Performance study of fly-ash-derived coagulant in removing natural organic matter from drinking water: synthesis, characterization, and modelling

This study is an attempt to develop a liquid coagulant using fly ash (FAC) for removing natural organic matter (NOM) from drinking water systems. Acid-alkali leaching and polymerization technique was used for developing FAC. Characterization of FAC was performed using Fourier-transform infrared spectroscopy (FESEM), field emission scanning electron microscopy (FTIR), and X-ray diffraction (XRD) to assess the surface morphology and functional groups present. FE SEM analysis revealed uneven, coarse, and irregular structure with numerous pores, an indicative of their high adsorption capacity. XRD study revealed that Al, Fe, and Si are the major constituent group of FAC. FAC demonstrated excellent potential in removing THMs precursors: dissolved organic carbon (84.46%), UV₂₅₄ (90.57%), and turbidity (96.85%) from the drinking water systems. Charge neutralization followed by adsorption is the main mechanism behind NOM removal. Moreover, FAC also showed good capability in minimizing the reactivity of NOM (ASI-72.86%) towards THM formation. FAC proved to be a good alternative for conventional coagulant used in drinking water treatment and can be effectively used for reducing NOM content of raw water which leads to the formation of THMs on chlorination.

Control for chlorine resistant spore forming bacteria by the coupling of pre-oxidation and coagulation sedimentation, and UV-AOPs enhanced inactivation in drinking water treatment

Spore forming bacteria (SFB) are strongly chlorine resistant. Their presence in drinking water may cause diseases and pose threat to public health. Three SFB strains, i.e. Bacillus alvei, Bacillus cereus, and Lysinibacillus fusiformis, were isolated and identified from the finished water of a drinking water treatment plant where bacteria colonies occasionally reached the limit value. Due to their chlorine resistance, a SFB control strategy coupling pre-oxidation, coagulation sedimentation, and UV-AOPs inactivation in water treatment process was studied in lab scale. Five minutes pre-oxidation treatment by applying Cl₂ and ClO₂ induced remarkable spore transformation. Longer pre-oxidation exposure time didn't have apparent improvement. Cl₂ and ClO₂ dosages of 0.9 mg/L and 0.5 mg/L were suggested, respectively. The formed spores can be efficiently removed by the following coagulation sedimentation treatment. At a suggested dosage combination of 20 mg/L PAC and 0.08 mg/L PAM, spore removal efficiency reached about 3.15-lg. Comparing to applying sole UV irradiation, enhanced UV inactivation by adding 0.1 mM H₂O₂, or Cl₂, or peroxymonosulfate (PMS) substantially improved the inactivation of the most chlorine resistant SFB strain, Lysinibacillus fusiformis. UV-AOPs stably achieved 2-lg inactivation rate at UV dosage of 40 mJ/cm². UV/H₂O₂, UV/Cl₂ and UV/PMS inactivation kinetically enhanced 1.20 times, 1.36 times and 1.91 times over sole UV irradiation. Intracellular DNA and ATP leakages were detected, and remarkable damages of Lysinibacillus fusiformis cells' surface and ultrastructure were observed. These findings evidenced cell wall and cell membrane destructions, guaranteeing substantial SFB cells inactivation. This study was carried out based on three SFB strains isolated from a finished water, and common engineering practical operations. By providing engineeringly relevant references, the outcomes obtained would be helpful for dealing with SFB outbreak risk in drinking water treatment.

Combined Electrocoagulation and Physicochemical Treatment of Cork Boiling Wastewater

Cork boiling wastewater (CBW) is a highly polluted and difficult to treat effluent resultant from the cork manufacturing industry. This study aims to evaluate a new, reliable, efficient, and sustainable process to treat this effluent. This paper tested electrocoagulation as a pre- and post-treatment to improve the already existing physicochemical treatment in a cork production facility in Portugal. In the physicochemical procedures (PC), the addition of different volumes of coagulant (ferric chloride (III) 40% w/w), neutralizer (sodium hydroxide, 32% w/w), and flocculant (polyacrylamide, 0.2 g/L) were evaluated. Electrocoagulation (EC) was performed in a bench-scale reactor, using aluminum and stainless-steel electrodes. For EC, different initial pH, current density, and current tension values were tested. When electrocoagulation was used as a post-treatment, better performances were achieved. However, treatment costs were increased significantly. Coagulation/flocculation offers a viable and cheap treatment, achieving removal efficiencies of 88.2%, 81.0%, 76.9%, and 94.2% for total chemical oxygen demand (tCOD), total carbon (TC), total nitrogen (TN), and soluble chemical oxygen demand (sCOD), respectively. With a PC-EC combination, it is possible to achieve removal efficiencies of 92.4%, 88.0%, 91.4%, and 91.4% for tCOD, TC, TN, and sCOD, respectively. The increased TN removal efficiency can translate into great benefits for certain discharge conditions and should be taken into consideration for improving the sustainability of cork industry. On the other hand, when EC is used as a pre-treatment, there are no benefits either in terms of treatment performance or operating costs.

Rapid and Efficient Removal of Anionic Dye in Water Using a Chitosan-Coated Iron Oxide-Immobilized Polyvinylidene Fluoride Membrane

Anionic dyes are one of the most serious contaminants in water as these molecules are known to be toxic to many living organisms. Herein, we report the development of functionalized polyvinylidene fluoride membranes modified with chitosan-coated iron oxide nanomaterials (Fe-PVDF) for the efficient treatment of anionic dye-contaminated water. Aqueous solutions of anionic dyes could be captured rapidly by passing through the functionalized membrane under reduced pressure. Under neutral conditions, Fe-PVDF showed a maximum removal capacity of 74.6 mg/g for Evans blue (EB) through the adsorption process. In addition, the adsorption capacity was significantly enhanced up to 434.78 mg/g under acidic conditions. The adsorption process for EB matched well with the Langmuir model, indicating monolayer adsorption of the dye to the membrane surface. Moreover, Fe-PVDF can be reusable by a simple washing step in an alkaline solution, and thus, the composite membrane was applied several times without a significant decrease in its adsorption performance. The same composite membrane was further applied to the removal of five other different anionic dyes with high efficiencies. The adsorption mechanism can be explained by the electrostatic interaction between the positively charged chitosan and the negatively charged dye as well as the affinity of the sulfate groups in dye molecules for the surface of the iron oxide nanoparticles. The easy preparation and rapid decolorization procedures make this composite membrane suitable for efficient water treatment.

Effect of Al hydrates on minimization of disinfection-by-products precursors by coagulation with intensified pre-oxidation towards cyanobacteria-laden water

Pre-oxidation is warranted to improve cyanobacteria removal and minimize disinfection by-products (DBPs) precursors for subsequent coagulation with polyaluminum chloride (PACl) in drinking water treatment. However, the reduction in DBP precursors strongly depends on the Al hydrates for PACl coagulation. This study aimed to investigate the effects of intensified NaOCl and ClO₂ pre-oxidation on the removal of Microcystis aeruginosa (MA) and the corresponding halogenated DBP precursors by PACl coagulation with different Al hydrates. Two PACl coagulants, namely PACl-W with 51% monomeric Al and PACl-H with 71% polymeric Al, were used for FlocCAM jar test. The results have shown that the reductions in MA cell and algogenic organic matter (AOM) are more pronounced by sweep flocculation in PACl-W coagulation coupled with NaOCl pre-oxidation. In contrast, ClO₂ pre-oxidation with PACl-H coagulation outperforms the floc formation and the reduction in each fluorescent DOM substance, especially for humic acid-like (HAL) substances reduction in response to charge neutralization. Regardless of pre-oxidation approach, PACl-H coagulation exhibits a superior reduction in carbonaceous DBP formation potential (C-DBPFP) comparative PACl-W coagulation, especially for intensified pre-oxidation (Cl₂:DOC = 3:1). Intensified NaOCl pre-oxidation is effective to enhance DBPFP reduction in a similar way to ClO₂ oxidation by coagulation with both PACl coagulants. In addition, it clearly demonstrates that the halogenated DBP precursors are well-correlated with UV₂₅₄ absorbance on the basis of principal component analysis (PCA) inference. It is concluded that intensified NaOCl pre-oxidation is an alternative approach to ClO₂ pre-oxidation for the minimization of DBP precursors in oxidation-coagulation processes for cyanobacteria-laden water treatment.

Layered double hydroxide-modified membranes for water treatment: Recent advances and prospects

Layered double hydroxides (LDHs) represent an exciting class of two-dimensional inorganic materials with unique physicochemical properties. They have been widely employed in water treatment due to their high surface areas, excellent ion exchange capacities, and highly tunable structures. They have also been employed in the fabrication and development of membranes for water treatment. 2D nanostructures as well as tailorable "structure forming units", surface functionalization with desired moieties, and interlayer galleries with adjustable heights and internal compositions make them attractive materials for membrane separations. This paper critically overviews the recent advancements in the synthesis and applications of LDH based membranes in water purification. The synthesis techniques and the effect of LDH incorporation into different membrane compositions have been described. LDH-based membranes showed excellent antifouling capability and improved water flux due to enhanced hydrophilicity. Such membranes have been successfully used for the treatment of inorganics, organics from environmental water samples. This review will be useful for understanding the current state of the LDH-based membranes for water purification and defining future research dimensions. In the end, we highlight some challenges and future prospects for the efficient application of LDH-based membranes in water decontamination.

Effects of aluminum chloride and coenzyme Q10 on the molecular structure of lipids and the morphology of the brain hippocampus cells

Aluminum chloride (AlCl3) is a neurotoxic substance, while coenzyme Q10 (CoQ10) is considered a lipid antioxidant. Herein, their effects on the molecular structure of lipids and the morphology of the hippocampus brain tissue were investigated. Three groups of Wistar albino male rats were used in this study. For four weeks, one group was kept as a control group; the second group was given AlCl3; the third group was given AlCl3/CoQ10. Fourier transform infrared (FTIR) and histopathological examinations were utilized to estimate alterations in the molecular structure of the lipids and the cell morphology, respectively. The FTIR spectra revealed considerable decreases in the CH contents and alterations in the molecular ratios of olefinic[double bond, length as m-dash]CH/νas(CH3), νas(CH2)/νas(CH3), and νas(CH2)/[νas(CH2) + νs(CH2)] in the group given AlCl3. However, no significant changes were detected in those rats given AlCl3/CoQ10. Histopathology images uncovered shrinking and dark centers in the pyramidal cells of brain tissue hippocampal cells. The diameters of the pyramidal cells were estimated to be 4.81 ± 0.55 μm, 4.04 ± 0.71 μm, and 4.63 ± 0.71 μm for the control, AlCl3, and AlCl3/CoQ10 groups, respectively. The study showed that the AlCl3 could cause a shrinking of around 16% in the hippocampus pyramidal cells; besides, CoQ10 is a powerful therapeutic antioxidant to help restore the hippocampal neurons to a regular state.

Pilot-Scale Study of Real Domestic Textile Wastewater Treatment Using Cassia fistula Seed-Derived Coagulant

Plant-derived coagulants have exhibited a good potential in wastewater treatment due to their “green” characteristics, high coagulating-flocculating activity, cost-effectiveness, and biodegradability. Nevertheless, research studies have focused mainly on bench-scale experiments; pilot-scale and full-scale simulations are still limited. Herein, we firstly report a pilot-scale study of real domestic textile wastewater treatment using Cassia fistula coagulant. The material characterizations using Fourier-transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), and dynamic light scattering (DLS) revealed that the natural gum extracted from C. fistula seed possessed a rough and irregular surface containing a high molecular weight galactomannan. The bench-scale investigation was initially conducted to determine the optimal pollutant concentration, initial pH, and coagulant dosage in the coagulation-flocculation process. The pilot-scale study revealed that C. fistula coagulant is an effective material for real textile wastewater treatment, showing percentage removal of 93.83% at a volume of 30 L and a coagulant dosage of 1.17 mg·L−1. Coagulation-flocculation using C. fistula seed gum could be an efficient primary wastewater treatment prior to membrane or biological methods to meet Vietnamese environmental standards. The main mechanisms of textile wastewater treatment involve adsorption/bridging interactions via hydrogen bonding and electrostatic attraction between negatively charged carboxylate groups of the coagulant and positively charged pollutants.

Guar gum based nanocomposites: Role in water purification through efficient removal of dyes and metal ions

Researchers nowadays are relentlessly on a race exploring sustainable materials and techniques for the sequestration of toxic dyes and metal ions from water bodies. Biopolymers such as guar gum, owing to its high abundance, low cost and non-toxicity, are potential candidates in this field. Plenty of hydroxyl groups in the polymer backbone enable guar gum to be functionalised or grafted in a versatile manner proving itself as an excellent starting substance for fabricating upgraded materials meant for diverse applications. This review offers a comprehensive coverage of the role of guar gum-based nanocomposites in removal of dyes and heavy metal ions from waste water through adsorption and photo-catalytic degradation. Isotherm and kinetics models, fabrication routes, characterisation techniques, swelling properties and reusability as well as adsorption and degradation mechanisms are outlined. A detailed analysis with convincing results suggests a good future perspective of implementation of these materials in real-time wastewater treatment technology.

Optimization studies on turbidity removal from cosmetics wastewater using aluminum sulfate and blends of fishbone

This research is centered on the optimization of coagulation–flocculation treatment of cosmetic wastewater. It analyzes blends of fishbone (BFB) and aluminum-based coagulant (ABC) to determine the efficacy of BFB as a potential coagulant–flocculants aid at optimum conditions using response surface methodology (RSM). The experiment was carried out employing the standard nephelometric procedure at 1000 rpm stirring rate. The central composite design (CCD) was used to examine the interactions of pH, dosage, and settling time to maximize the turbidity removal efficiency of the ABC- and BFB-driven coag–flocculation. The optimal pH, dosage, and settling time for ABC were obtained as 10, 0.1 g/L, and 2 min, while pH 6, 0.4 g/L, and settling time of 4 min were recorded for BFB following the established quadratic model of the RSM. The removal efficiency of ABC and BFB plots 80% and 88%, respectively; this corresponds to 262 NTU and 288 NTU of removal from the wastewater at optimal conditions. The kinetics result indicated that the rate constant (Kf) 3 × 10−3 (L/g min) of BFB surpassed 5 × 10−5 (L/g min) recorded for ABC following second-order coag–flocculation reaction, with correlation coefficients (R2) values of 0.999 and 0.9985, respectively. The research also applied cost–benefit analysis for the determination of the efficacy of BFB. The figure obtained shows that the benefit of using BFB will save $5.50 compared to ABC based on this work. At optimal conditions, BFB satisfied the environmental protection agency pH standard for industrial wastewater discharge, promising coagulant–flocculants aid for industrial wastewater purification purpose and the preservation of the environment.

Evaluation of the effectiveness, safety, and feasibility of 9 potential biocides to disinfect acidic landfill leachate from algae and bacteria

This study evaluates 9 biocides as disinfectants against microbiological contaminants, specifically, microalgae and E. coli, while assessing their safety and environmental impact. Specifically, the biocide effectiveness and corresponding generation of halogenated compounds is assessed in a real contaminated groundwater receiving acidic leachate from a phosphogypsum landfill. Oxidizing agents are investigated, namely, hypochlorite, peracetic acid, hydrogen peroxide, chlorine dioxide, and persulfate, together with electrophilic biocides, namely, 2,2-dibromo-2-cyanoacetamide and (chloro-) methylisothiazolinone. In addition, a novel disinfection approach is assessed by applying reducing agents, namely, sulfite and metabisulfite. The disinfection mechanism and the formation of halogenated compounds are discussed on the basis of the mode of action and of the molecular structure of each biocide. Overall, the results show that an optimal dosage of the biocides exists to minimize the formation of harmful compounds in water while maximizing disinfection, especially for hypochlorite and peracetic acid. This dosage was between 0.03 mM and 0.15 mM depending on the biocide. The safety of electrophilic biocides is found to be associated to their molecular structure rather than their mode of action. Hydrogen peroxide, MIT, and metabisulfite are the most promising disinfectants in the contaminated groundwater matrix of interest since no halogenated by-products are detected upon successful disinfection, while they are able to completely inactivate bacteria and remove over the 80% of microalgae in the selected matrix. In particular, metabisulfite represents a highly promising biocide, owing to its low environmental and health impacts, as well as economic feasibility (estimated reagent cost ~0.002 € per cubic meter of treated water).

Abdel Mageid R, Radwan EK, Khattab TA, Olson MA, El Malah T. Adsorption isotherms and kinetic studies for the removal of toxic reactive dyestuffs from contaminated water using a viologen-based covalent polymer

A polyviologen-based adsorbent was prepared via polymerization of a viologen-dialdehyde with a hydroxyl-substituted aryl-dihydrazide in acidified water.

Assessment and treatment of floodwater in the Vietnamese Mekong Delta using a simple filter system based on silver nanoparticles coated onto activated carbon derived from rice husk

The floods in the Vietnamese Mekong Delta have long caused a shortage of clean water supply, which has a significant impact on the indigenous people in the region. We have conducted a preliminary survey of the water quality of the Hau Giang River (one of the two main branches of the Mekong River) before, during, and after the flood season. The obtained results demonstrated that the water in the Hau Giang River was highly turbid and contaminated with a large number of harmful microorganisms. Thus, in this study, a simple filter system based on silver nanoparticles coated onto activated carbon derived from rice husk (AgNPs@AC) has been proposed for treating floodwater from the Hau Giang River. The optimal conditions for AgNPs@AC preparation were established. The prepared AgNPs@AC was then characterized using various surface analyses such as SEM, TEM, XRD, BET, FTIR, and DLS. The initial floodwater source would be pre-treated with polyaluminum chloride using the coagulation–sedimentation method to remove the suspended solids before being discharged into the filtration column containing AgNPs@AC. The results showed that the filter system based on AgNPs@AC performed well in removing turbidity, dissolved solids, suspended solids, color, and bacteria from the floodwater. In addition, it was determined that the filter column with a 30 mm thick AgNPs@AC layer could continuously process 1300 m³ of the floodwater and had a service life of more than two months. The findings of this study not only added to our understanding of the floodwater treatment capacity of activated carbon coated nanoparticles, but they also provided valuable information for water treatment plants along the Hau Giang River, aquatic ecosystem researchers, and public health researchers.

In this study, a simple filter system based on silver nanoparticles coated onto activated carbon derived from rice husk (AgNPs@AC) has been proposed for treating floodwater from the Hau Giang River.

Recent Achievements in Polymer Bio-Based Flocculants for Water Treatment

Polymer flocculants are used to promote solid-liquid separation processes in potable water and wastewater treatment. Recently, bio-based flocculants have received a lot of attention due to their superior advantages over conventional synthetic polymers or inorganic agents. Among natural polymers, polysaccharides show many benefits such as biodegradability, non-toxicity, ability to undergo different chemical modifications, and wide accessibility from renewable sources. The following article provides an overview of bio-based flocculants and their potential application in water treatment, which may be an indication to look for safer alternatives compared to synthetic polymers. Based on the recent literature, a new approach in searching for biopolymer flocculants sources, flocculation mechanisms, test methods, and factors affecting this process are presented. Particular attention is paid to flocculants based on starch, cellulose, chitosan, and their derivatives because they are low-cost and ecological materials, accepted in industrial practice. New trends in water treatment technology, including biosynthetic polymers, nanobioflocculants, and stimulant-responsive flocculants are also considered.

A nanocomposite paper comprising calcium silicate hydrate nanosheets and cellulose nanofibers for high-performance water purification

Removal of soluble organic and inorganic contaminants from wastewater to produce clean water has received much attention recently. However, the simultaneous enhancement of water permeability and removal efficiency is still a challenge for filtration membranes. Here, we present a new kind of nanocomposite paper (CSH/CNF) consisting of calcium silicate hydrate (CSH) nanosheets and cellulose nanofibers (CNFs), and demonstrate the rapid water filtration and highly efficient contaminant (e.g., dyes, proteins, and metal ions) adsorption properties. The CNFs can serve as the bridging material to connect the CSH nanosheets to form a porous network structure and vital channels in the CSH/CNF paper for rapid water transportation. The weight ratio of CSH nanosheets in the paper is up to 75–85%. The weight ratio of CSH nanosheets has a significant effect on the water permeability and removal efficiency. The water permeability of the CSH/CNF paper with 82.5 wt% CSH nanosheets reaches as high as 312.7 L m⁻² h⁻¹ bar⁻¹, which is about 14.7 times that of the CSH/CNF paper with 75 wt% CSH nanosheets. Because of the high specific surface area and abundant adsorption sites of CSH nanosheets, the CSH/CNF paper with 82.5 wt% CSH nanosheets exhibits high adsorption capacities and removal efficiencies for methyl blue (242.6 mg g⁻¹, 97.3%), bovine serum albumin (289.2 mg g⁻¹, 98.5%) and Pb²⁺ ions (366.2 mg g⁻¹, 98.2%). The CSH/CNF nanocomposite paper holds great potential for application in environmental wastewater purification.

A nanocomposite paper with high water permeability and removal efficiency was prepared for the removal of organic and inorganic contaminants by filtration.